Valid from April 1 until December 31, 2019 Imperial Version OFFERS SPECIAL INNOVATION 2019 MACHINING TELLIGENTLY.
|
|
|
- Leona Armstrong
- 5 years ago
- Views:
Transcription
1 Valid from April until December 3, 09 Imperial Version OFFERS SPECIAL MACHINING 4.0 INDUSTRY TELLIGENTLY
2 The Smallest Helical Indexable Multi-Toothed Endmill for 90 Shoulder Milling 3 30 X Magnified High Positive Rake Large Diameter Core Performs 90 Shoulder Cost Effective Insert HM390 TPKT 05 Helical Cutting Edges 0 HM390 TPKT 05 Assorted Inserts Receive 50% on the Corresponding Endmill Cutter (HM390 ETP...-05) up to 0.65" 30 HM390 TPKT 05 Assorted Inserts Receive Corresponding Endmill Cutter (HM390 ETP...-05) up to 0.65 Free of Charge Valid from April until December 3, 09
3 DRVS HM390 ETP-MM-05 DC LF OAL THSZMS DCONMS Designation DC CICT () LF DCONMS THSZMS OAL DRVS () RMPX (3) WT (4) HM390 ETPD MMT T HM390 ETPD.6-04-MMT T () () (3) (4) Item weight HM390 TPKT 050 IC L S BS RE Dimensions Tough Hard Recommended Machining Data ap f Designation L IC S LE RE BS (inch) (inch/t) HM390 TPCT 050PDR HM390 TPKT 050PDR IC830 IC808 IC80 3 3
4 NANMILL NANO ENDMILL Smallest Indexable Insert Combined with Small Diameter Multi-Toothed Endmill for 90 Shoulder Milling 3 Extra Positive Cutting Edge Very Strong and Durable Insert New Generation Insert Performs 90 Shoulder 5 X Magnified 0 HM390 TPKR 04 Assorted Inserts Receive 50% on the Corresponding Endmill Cutter (HM390 ETP -04) up to 0.38" 30 HM390 TPKR 04 Assorted Inserts Receive Corresponding Endmill Cutter (HM390 ETP -04) up to 0.38" Free of Charge 4 Valid from April until December 3, 09
5 HM390 ETP-04 DC LH OAL DCONMS Designation DC CICT () OAL LH DCONMS Shank () RMPX (3) WT (4) HM390 ETP D.3--C C HM390 ETP D.38-3-C C.6.09 () () (3) (4) Item weight DRVS DC HM390 ETP-MM-04 LF OAL Designation DC CICT () LF DCONMS THSZMS OAL DRVS () RMPX (3) WT (4) HM390 ETP D.3--MMT T HM390 ETP D.38-3-MMT T () () (3) (4) Item weight THSZMS DCONMS HM390 TPKR 040 IC LE L S BS RE Dimensions Recommended Machining Data ap f Designation L IC S LE RE BS (inch) (inch/t) HM390 TPKR 040-PCTR IC830 3 SPECIAL OFFERS 5
6 Twisted Shape Insert for High Feed Milling Guarantees Higher Productivity 3 4 High Feed Milling Large Body Core Ensures Stability and Rigidity High Positive Rake Angle Double Sided Insert Unique Insert Shape Assorted Inserts Receive 50% on the Corresponding Endmill Cutter Assorted Inserts Receive 50% 6 Valid from April until December 3, 09
7 3 4 Assorted Inserts Receive Corresponding Endmill Cutter Free of Charge Assorted Inserts Receive Free of Charge SPECIAL OFFERS 7 Valid from April until December 3, 09
8 FFX4 ED OAL LH DCX DC DCONMS 7 Designation DCX DC CICT () LH OAL DCONMS Shank () RMPX (3) WT (4) FFX4 ED W W FFX4 ED W W FFX4 ED W W FFX4 ED W W.9.44 FFX4 ED W W.9.50 FFX4 ED W W.8.0 FFX4 ED W W.8.03 FFX4 ED W W.. FFX4 ED W W..50 () () W - Weldon (3) (4) Item weight DCX DC THSZMS DCONMS FFX4 ED-MM 7 DRVS LF OAL Designation DCX DC CICT () THSZMS LF OAL RMPX () DCONMS DRVS (3) WT (4) FFX4 ED6/.63--MMT T () () (3) (4) Item weight LF OAL FFX4 ED-M Inserts with 4 Cutting Edges DCX DC KAPR DRVS THSZMS DCONMS Designation DCX DC CICT () THSZMS LF OAL RMPX () DCONMS DRVS (3) WT (4) FFX4 ED0/.78-3-M M FFX4 ED5/.98-4-M M FFX4 ED3/.6-5-M M FFX4 ED35/.38-5-M M () () (3) (4) Item weight SPECIAL OFFERS 8
9 FFX4 FD OAL DHUB DCONMS DC DCX 7 Designation DCX DC CICT () OAL DHUB DCONMS RMPX () WT (3) FFX4 FD () () (3) Item weight RE S FFX4 XNMU INSL W Dimensions Tough Hard Recommended Machining Data ap f Designation INSL S RE W (inch) (inch/t) FFX4 XNMU 04030HP FFX4 XNMU 04030T IC88 IC840 IC830 IC580 IC808 IC80 SPECIAL OFFERS 9
10 Unique Tangential Insert for High Feed Face Milling 4 3 Tangential Insert For Steel, Cast Iron and Exotic Materials Strong Cutting Edge Up to 3. Ramp Down Angle 30 FF VNMT 07 Assorted Inserts Receive 50% 60 FF VNMT 07 Assorted Inserts Receive Free of Charge 0 Valid from April until December 3, 09
11 FF VNMT 0706 S W INSL RE Dimensions Tough Hard Recommended Machining Data ap f Designation W INSL RE S (inch) (inch/t) FF VNMT 0706ZN-ER () FF VNMT 0706ZN-ETR () () () IC88 IC845 IC840 IC830 IC580 IC5400 IC5500 IC808 IC80 FFV-D-R-VN07 with 4 Cutting Edges DHUB DCONMS DC DCX 6 OAL Designation DCX DC AE CICT () OAL DCONMS DHUB RMPX () Arbor Lbs FFV D R-VN A.0 FFV D R-VN A.35 FFV D R-VN FFV D R-VN () () Spare Parts Designation FFV D R-VN07 FFV D R-VN07 FFV D R-VN07 FFV D R-VN07 (a) (b) 4 3 SPECIAL OFFERS
12 Smallest Indexable Insert Combined with Small Diameter Multi-Toothed Endmill for High Feed and Productivity 3 High Feed Milling Very Strong and Durable Insert High Ramp Down Angle Easy Chip Evacuation 0 X Magnified 0 FFT3 TXMT 0 Assorted Inserts Receive 50% on the Corresponding Endmill Cutter (FFT3 EFM -0) up to 0.39" 30 FFT3 TXMT 0 Assorted Inserts Receive Corresponding Endmill Cutter (FFT3 EFM -0) up to 0.39" Free of Charge Valid from April until December 3, 09
13 FFT3 EFM-MM 0 DCX DC 4 LF OAL THSZMS DCONMS Designation DCX DC CICT () LF DCONMS THSZMS OAL DRVS () RMPX (3) WT (4) FFT3 EFMD08/.3-MMT T FFT3 EFMD0/.39-3MMT T () () (3) (4) Item weight FFT3 TXMT 0 RE IC S S INSL Dimensions Recommended Machining Data ap f Designation INSL IC RE S S (inch) (inch/t) FFT3 TXMT 0005T IC830 3 SPECIAL OFFERS 3
14 Small Diameter Multi-Toothed Endmill for High Feed and Productivity 3 High Feed Milling High Positive Rake Angle High Productivity Through-Tool Coolant 30 X Magnified 0 FFT3 WXMT 03 Assorted Inserts Receive 50% on the Corresponding Endmill Cutter (FFT3 EFM -03) up to 0.65" 30 FFT3 WXMT 03 Assorted Inserts Receive Corresponding Endmill Cutter (FFT3 EFM -03) up to 0.65" Free of Charge 4 Valid from April until December 3, 09
15 FFT3 EFM-03 7 A DCX DC A LH OAL DCONMS Designation DCX DC CICT () LH OAL DCONMS Shank () RMPX (3) WT FFT3 EFMD C C FFT3 EFMD C C FFT3 EFMD C C.5.40 () () W - Weldon (3) FFT3 EFM-MM 03 OAL LF DCX DC THSZMS DCONMS DRVS Designation DCX DC CICT () LF DCONMS THSZMS OAL DRVS () RMPX (3) WT (4) FFT3 EFMD0/.39-MMT T FFT3 EFMD/.47-3MMT T FFT3 EFMD6/.63-4MMT T () () (3) (4) Item weight FFT3 WXMT 03 IC S RE 7 Dimensions Tough Hard Recommended Machining Data ap f Designation IC S RE (inch) (inch/t) FFT3 WXMT 03006T IC830 IC808 3 SPECIAL OFFERS 5
16 Radial Profile Insert for Die & Mold and General Applications TR45 TR90 High Positive Rake Angle Innovative Insert Design Variety of Cutting Geometries Cost Effective Insert TRFF TR6 TRFF TXMT 07 Assorted Inserts Receive 50% on the Corresponding Endmill Cutter (TR6 ER...-07) up to.5" TRFF TXMT 07Assorted Inserts Receive Corresponding Endmill Cutter (TR6 ER...-07) up to.5" Free of Charge 6 Valid from April until December 3, 09
17 Radial Profile Insert for Die & Mold and General Applications High Positive Rake Angle Innovative Insert Design Variety of Cutting Geometries Cost Effective Insert 5 TRFF TXMT 0 Assorted Inserts Receive 50% on the Corresponding Endmill Cutter (TR6 ER...-0) up to.5" TRFF TXMT 0 Assorted Inserts Receive 50% (TR6 FR...-0) up to 3" 7 Valid from April until December 3, 09
18 Radial Profile Insert for Die & Mold and General Applications High Positive Rake Angle Innovative Insert Design Variety of Cutting Geometries Cost Effective Insert TRFF TXMT 0 Assorted Inserts Receive Corresponding Endmill Cutter (TR6 ER...-0) up to.5" Free of Charge TRFF TXMT 0 Assorted Inserts Receive (TR6 FR...-0) up to 3" Free of Charge 8 Valid from April until December 3, 09
19 TR6 TNCU/MU S IC Dimensions RE Tough Hard Recommended Machining Data ap f Designation RE IC S (inch) (inch/t) TR6 TNCU TR6 TNCU TR6 TNMU TR6 TNCU TR6 TNCU TR6 TNCU TR6 TNMU TR6 TNCU TR6 TNCU TR6 TNCU IC88 IC830 IC808 IC908 TR90 TXMT S IC RE Dimensions Tough Hard Recommended Machining Data ap f Designation RE IC S (inch) (inch/t) TR90 TXMT TR90 TXMT IC830 IC808 TRFF TXMT S IC KRINS RE Dimensions Tough Hard Recommended Machining Data ap f Designation RE Rg () IC S KRINS () (inch) (inch/t) TRFF TXMT TRFF TXMT () () IC830 IC808 9
20 TR45 TXMT S IC 45 RE Dimensions Tough Hard Recommended Machining Data ap f Designation RE IC S (inch) (inch/t) TR45 TXMT IC830 IC808 TR6 ER 3 4 TR6 TNCU TRFF TXMT TR90 TXMT TR45 TXMT DCX DC U BHTA LU LH OAL DCONMS Tool shown with TR6 Designation DCX DCX_ DCX_3 DCX_4 DC DC_ DC_4 3 _4 U BHTA TR6 ERD W TR6 ERD W TR6 ERD W TR6 ERD W TR6 ERD W TR6 ERD W Designation CICT () LU LU_ LU_3 LU_4 LH LH_ LH_3 LH_4 OAL OAL_ OAL_3 OAL_4 DCONMS TR6 ERD W TR6 ERD W TR6 ERD W TR6 ERD W TR6 ERD W TR6 ERD W Designation Insert MIID () MIID_ (3) MIID_3 (4) MIID_4 (5) Lbs TR6 ERD W TRFF TXMT 070 TR90 TXMT TR6 ERD W TRFF TXMT 070 TR90 TXMT TR6 ERD W TRFF TXMT 070 TR90 TXMT TR6 ERD W.5-07 TRFF TXMT 070 TR90 TXMT TR6 ERD W.00-0 TRFF TXMT 004 TR90 TXMT TR45 TXMT TR6 ERD W.5-0 TRFF TXMT 004 TR90 TXMT TR45 TXMT () () (3) (4) (5) SPECIAL OFFERS 0
21 TR6 ER-M TR6 TNCU TRFF TXMT DCX DC THSZMS DCONMS 3 TR90 TXMT BHTA U 4 LF TR45 TXMT Tool shown with TR6 OAL Designation DCX DCX_ DCX_3 DCX_4 DC DC_ DC_4 3 _4 U BHTA TR6 ER D6/0.63--M TR6 ER D0/ M TR6 ER D5/ M TR6 ER D3/.6-6-M TR6 ER D35/.38-6-M TR6 ER D5/ M TR6 ER D3/.6-4-M TR6 ER D35/.38-5-M Designation CICT () LF LF_ LF_3 LF_4 OAL OAL_ OAL_3 OAL_4 DCONMS THSZMS TR6 ER D6/0.63--M M08 TR6 ER D0/ M M0 TR6 ER D5/ M M TR6 ER D3/.6-6-M M6 TR6 ER D35/.38-6-M M6 TR6 ER D5/ M M TR6 ER D3/.6-4-M M6 TR6 ER D35/.38-5-M M6 Designation MIID () MIID_ (3) MIID_3 (4) MIID_4 (5) Lbs Insert TR6 ER D6/0.63--M08-07 TRFF TXMT 070 TR90 TXMT TR6 ER D0/ M0-07 TRFF TXMT 070 TR90 TXMT TR6 ER D5/ M-07 TRFF TXMT 070 TR90 TXMT TR6 ER D3/.6-6-M6-07 TRFF TXMT 070 TR90 TXMT TR6 ER D35/.38-6-M6-07 TRFF TXMT 070 TR90 TXMT TR6 ER D5/ M-0 TRFF TXMT 004 TR90 TXMT TR45 TXMT TR6 ER D3/.6-4-M6-0 TRFF TXMT 004 TR90 TXMT TR45 TXMT TR6 ER D35/.38-5-M6-0 TRFF TXMT 004 TR90 TXMT TR45 TXMT () () (3) (4) (5) TR6 FR OAL DHUB DCONMS BHTA U 3 4 TR6 TNCU TRFF TXMT TR90 TXMT TR45 TXMT DC DCX Tool shown with TR6 Designation DCX DCX_ DCX_3 DCX_4 DC DC_ DC_4 3 _4 U BHTA CICT () OAL OAL_ TR6 FR D TR6 FR D TR6 FR D TR6 FR D Designation OAL_3 OAL_4 DCONMS DHUB Arbor MIID () MIID_ (3) MIID_3 (4) (5) Lbs MIID_4 TR6 FR D A TRFF TXMT 004 TR90 TXMT TR45 TXMT TR6 FR D A TRFF TXMT 004 TR90 TXMT TR45 TXMT TR6 FR D A TRFF TXMT 004 TR90 TXMT TR45 TXMT TR6 FR D A TRFF TXMT 004 TR90 TXMT TR45 TXMT () () (3) (4) (5)
22 HIGH FEED Square Insert for Fast Feed Face Milling with Higher Productivity 4 3 Reinforced Insert Radius For Stainless Steel, Cast Iron & Exotic Materials Positive Insert Positioning Interrupted Cut Assorted Inserts Receive 50% on the Corresponding Endmill Cutter up to.50" Assorted Inserts Receive 50% up to.50" Valid from April until December 3, 09
23 HIGH FEED Assorted Inserts Receive 80% on the Corresponding Endmill Cutter up to.50" Assorted Inserts Receive 80% up to.50" Assorted Inserts Receive 50% on the Corresponding Endmill Cutter up to 5" Assorted Inserts Receive 80% up to 5" 3 Valid from April until December 3, 09
24 FFQ4 D-09 DHUB DCONMS OAL DC DCX Designation DCX () DC AE () CICT (3) OAL DCONMS DHUB RMPX (4) Lbs MIID (5) TQ (6) FFQ4 D FFQ4 D FFQ4 D () () (3) (4) (5) (6) FFQ4 D- DHUB DCONMS DC DCX AE 9 OAL Designation DCX () DC AE () CICT (3) LF DHUB DCONMS Arbor RMPX (4) Lbs MIID (5) TQ (6) FFQ4 D A FFQ4 D A FFQ4 D A FFQ4 D FFQ4 D () () (3) (4) (5) (6) FFQ4 D-7 DHUB DCONMS OAL DC DCX 4 Designation DCX () DC AE () CICT (3) OAL DCONMS DHUB RMPX (4) CSP (5) Lbs MIID (6) TQ (7) FFQ4 D FFQ4 D FFQ4 D FFQ4 D () () (3) (4) (5) (6) (7) FFQ4 D-M-09 DCX DC LF THSZMS DCONMS DRVS Designation DCX () DC AE () CICT (3) THSZMS LF OAL DCONMS RMPX (4) DRVS (5) Lbs MIID (6) TQ (7) FFQ4 D M M () () (3) (4) (5) (6) (7) 4
25 FFQ4 D-W-09 DCX DC LH OAL DCONMS Designation DCX () DC AE () CICT (3) LH DCONMS OAL RMPX (4) Lbs MIID (5) TQ (6) FFQ4 D W FFQ4 D W FFQ4 D W FFQ4 D W () () (3) (4) (5) (6) RE FFQ4 SOMT 0904 L S Dimensions Tough Hard Recommended Machining Data ap f Designation L S RE (inch) (inch/t) FFQ4 SOMT 0904T FFQ4 SOMT 0904RM-T FFQ4 SOMT 0904HP RE IC88 IC830 IC580 IC808 IC80 FFQ4 SOMT 706 L S Dimensions Tough Hard Recommended Machining Data ap f Designation L S RE (inch) (inch/t) FFQ4 SOMT 706RM-T () FFQ4 SOMT 7065HP () FFQ4 SOMT 7065T (3) () () (3) RE IC88 IC830 IC808 IC80 FFQ4 SOMT 05 L S Dimensions Tough Hard Recommended Machining Data ap f Designation L S RE (inch) (inch/t) FFQ4 SOMT 05RM-HP FFQ4 SOMT 05RM-T FFQ4 SOMT 056HP FFQ4 SOMT 056T FFQ4 SOMT 056T IC88 IC830 IC580 IC808 IC80 5
26 The One and Only Double-Sided Twisted Parting Insert with no Depth of Cut Limitation In addition to highly efficient parting inserts in single and double-ended conventional configurations, ISCAR offers a unique double-ended twisted geometry for unlimited depth of penetration. The DO-GRIP ranges also include the largest choice of parting widths available in today's market, covering all applications. ISCAR offers a wide variety of chipformers and the most advanced grades to ensure unbeatable performance and extended tool life. Assorted Inserts Receive OR 50% 6 Valid from April until December 3, 09
27 ISCAR's single-ended insert for parting, with an improved clamping method Very rigid clamping in a tangentially oriented pocket Enables machining at high feed rates and provides excellent straightness and surface finish Recommended for parting also large diameter parts and for interrupted cuts Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems Assorted Inserts Receive 50% OR 50% 7 Valid from April until December 3, 09
28 Pentagonal Economical Adapters, 5 Pockets for Parting & Grooving Ease of Use High Pressure New Generation Cost Effective Coolant Insert Receive 50% Free of Charge Receive Free of Charge 8 Valid from April until December 3, 09
29 CUTDIA OAL CNT (typx3) THMPR/L D45-JHP HBL Holders with High Pressure WF B Designation H HF HBH B WF CUTDIA OAL HBL CNT THMPR/L 9-D45-JHP THMPR/L 5.4-D45-JHP HF HBH H PSI Max Spare Parts Designation THMPR/L D45-JHP HW 5.0 CUTDIA ADMP D45 CW WB Designation CWN () CWX () WB D CUTDIA Insert ADMP D ADMP D () () D DESIGNATION THMPR/L...-D45-JHP Tmax. to Dmax. Tmax Dmax Tmax Dmax (CUTDIA) Spare Parts Designation ADMP D45-.0 ADMP D
30 The SUMOCHAM drill line comprises a revolutionary clamping system for precise machining and high productivity. The wide variety of exchangeable heads provides solutions for drilling all types of materials and applications. SUMOCHAM is the most productive and profitable solution for the holemaking industry. Receive 0% on the whole packagetool and inserts, OFFERS SPECIAL 30 Valid from April until December 3, 09
31 LOGI 3CHAM THREE FLUTE CHAMDRILL 3 Effective Cutting Edges Dia 5.9- mm Drilling Master Available in Diameter Range of -5.9 mm with 3 & 5xD Body Overhang 3 Self Centering Insert For Steel & Cast Iron High Productivity Cost Effective Insert Receive 75% 3 Valid from April until December 3, 09
32 More flutes in relation to cutting diameter, spiral flutes reduce cutting forces Sharp ground helical cutting edges Low cutting forces Short machining time Thread diameter accuracy adjustment Bottom thread relief not required No problem with broken taps Thread milling next to bottom of blind hole Excellent and controlled thread surface finish One tool is suitable for various thread milling profiles Easy and efficient machining for thread milling on CNC milling centers Receive 5% Receive 5% 3 Valid from April until December 3, 09
33 Double Sided Insert with 4 Positive Cutting Edges ISCAR introduces new double-sided inserts with 4 unique cutting edges as an advantageous alternative to the conventional ISO standard positive inserts with cutting edges. 3 Medium Finish Double Sided Dovetail Positive Rake Insert Insert 4 Assorted Inserts Receive 50% Receive Free of Charge OR 50% OFFERS SPECIAL 33 Valid from April until December 3, 09
34 3 Assorted Inserts Receive 50% 4 Receive Free of Charge OFFERS SPECIAL 34 Valid from April until December 3, 09
35 PCLXR/L HF GAMF H LH H GAMP 95º 95º WF B Designation B H HF LF LH WF GAMP GAMF Insert PCLXR/L 08-3X PCLXR/L 0-3X PCLXR/L -4X PCLXR/L 6-4X LF CXMG-F3M L IC S 95º 95º 95º RE Dimensions Tough Hard Recommended Machining Data Designation L IC S RE (inch) CXMG F3M CXMG T504-F3M CXMG T508-F3M IC605 IC806 IC807 ap f (IPR) CXMG-F3P L IC S 95º 95º 95º RE Dimensions Recommended Machining Data ap f Designation L IC S RE (inch) (IPR) CXMG F3P CXMG T504-F3P CXMG T508-F3P IC850 CXMG-M3M L RE IC S 95º 95º 95º Dimensions Tough Hard Recommended Machining Data Designation L RE S IC (inch) CXMG M3M CXMG T508-M3M CXMG T5-M3M IC605 IC806 IC807 ap f (IPR) CXMG-M3P L IC S 95º 95º 95º RE Dimensions Tough Hard Recommended Machining Data Designation L IC S RE (inch) CXMG M3P CXMG T508-M3P CXMG T5-M3P IC850 IC850 ap f (IPR) 35
36 ISO standard tools perform most of the industry's chip removal. The applications range from finishing to roughing. As a full-line supplier of metalworking tools, ISCAR naturally provides the full ISO range of quality tools. All standard geometries are supplied, including the most popular trigon shape. These semi-triangular turning inserts are used for axial and face turning and feature six 80 corner cutting edges, saving production time and costs while maximizing insert life. ISCAR offers a variety of unique chipformer and grade combinations that provide solutions to most of modern industry's machining needs. Assorted Inserts Receive 5% 36 Valid from April until December 3, 09
37 In many turning applications, people tend to use larger inserts than are actually required for the machining parameters being applied. To fill the niche, ISCAR is introducing a wide range of ISOTURN small sized inserts, which provide an economical advantage per cutting edge. The new inserts are available in a wide range of geometries, corner radii, new chipformers and the most advanced SUMO TEC carbide grades. 50 Assorted Inserts Receive 5% 37 Valid from April until December 3, 09
38 Become an INDUSTRY 4.0 Master! Robots System Integration Internet of Things Big Data Cloud 3D Simulation ISCAR s Easy to Use Digital World of Applications Web Apps E-CAT CLOUD Mobile Apps
Valid until March 31, Inch Version OFFERS SPECIAL INNOVATION 2019 INTELLIGENTLY DUSTRY 4.0 MACHINING.
Valid until March, 09 Inch Version OFFER PECIAL INNOVATION 09 MACHINING INTELLIGENTLY DUTRY.0 www.iscarmetals.com INNOVATION 09 Tangential Cost Effective Insert with 8 Cutting Edges for 900 houlder Milling
NPA. Expansion of the HM390 Triangular Inserts Line with Tools Carrying 5 mm Edged Inserts. New Product Announcement. Page 1 / 9
NPA Expansion of the HM390 Triangular Inserts Line with Tools Carrying 5 mm Edged Inserts Page 1 / 9 Page 2 / 9 Highlights Tools carrying triangular inserts with 5 mm helical cutting edges Effective and
PROMOTIONS2016. Machining Intelligently. Self. ISCAR's Winning Edge Machining Innovations. ISCAR ENDUSERS
PROMOTIONS2016 ENDUSERS ISCAR's Winning Edge Machining Innovations Self Excellent Cylindricity and Superb Surface Finish! New Cutters Carrying Square Single-Sided Inserts Endmills with Indexable Solid
PROMOTIONS2016. Machining Intelligently. Self. ISCAR's Winning Edge Machining Innovations. ISCAR ENDUSERS
PROMOTIONS2016 ENDUSERS ISCAR's Winning Edge Machining Innovations Self Excellent Cylindricity and Superb Surface Finish! New Cutters Carrying Square Single-Sided Inserts Endmills with Indexable Solid
PROMOTIONS2015. Machining Intelligently KIT DEMO KIT. Valid until February 28, 2015 IQ ISCAR HIGH Q LINES.
PROMOTIONS2015 Valid until February 28, 2015 IQ IQ DEMO KIT KIT www.iscar.com KIT 1 Promo Code #IQV8 TURNING - Economy and Heavy Cut ISO style inserts, used in all machine shops, historically represent
PARTING ISCAR PARTING USER GUIDE. Parting and Grooving. Insert Positioning
90 80 0 70 10 60 20 50 30 40 Parting and Grooving Selection of Inserts For a proper match of insert and cutting material to application, the following variables must be taken into consideration: Width
PROMOTIONS2014. Valid from February 17 to June 30,
PROMOTIONS2014 Valid from February 17 to June 30, 2014 www.iscarmetals.com Double-Sided Profiling Inserts with Six.250" Corner Radii The HELIDO H606 line is an economical tool and insert system which features
w w w. i s c a r. c o m
www.iscar.com Railway Industry The railway industry has played an important role in the past two decades becoming one of the leading means of transportation for freight and passengers. Ongoing investments
Bestellinformationen RAL
Bestellinformationen RAL90 2016-07-01 Shoulder milling too RAL90 insert for milling N Dimensions, mm, inch Medium RE Ordering code W1 LE S BS 15 0.50 KPHT 15 04 05 FR-CM H13A 10.7 14.0 4.60 0.9 0.020.420.590.180.035
BELCAR PRODUCTS MILLING CUTTERS AND INSERTS TABLE OF CONTENTS
BELCAR PRODUCTS MILLING CUTTERS AND INSERTS TABLE OF CONTENTS MILLING CUTTERS AP9 WELDON / R8 SHANKS ENDMILLS PAGE 2 AP9 SHELL MILL CUTTERS PAGE 3 AP9 LONG EDGE END MILLS PAGE 4 OF HIGH SHEAR OCTAGON CUTTERS
New. Products2013.
T u n g a l o y www.tungaloy.com Company Overview Providing Complete Tooling Solutions for the Metal Removal and Industrial Product Sectors TUNGALOY is one of the world s leading manufacturers of carbide
TOMORROW S TOOLING TODAY SECO NEWS SUMMARY
TOMORROW S TOOLING TODAY SECO NEWS SUMMARY 2018.1 TOOLS FOR LIMITLESS PRODUCTIVITY AND PROFITABILITY JETSTREAM TOOLING WELCOME TO SECO NEWS SUMMARY 2018.1 Discover how the latest Seco innovations, many
TOMORROW S TOOLING TODAY SECO NEWS SUMMARY
TOMORROW S TOOLING TODAY SECO NEWS SUMMARY 2018.1 TOOLS FOR LIMITLESS PRODUCTIVITY AND PROFITABILITY WELCOME TO SECO NEWS SUMMARY 2018.1 Discover how the latest Seco innovations, many of which are featured
Double-sided positive insert for semi-finishing to finishing
MillLine Tungaloy Report No. 508-US DOMINI-MILL Double-sided positive insert for semi-finishing to finishing ACCELERATED MACHINING MillLine DoMini-Mill features the advantage of an economical 6-cornered
CoroMill. All solutions at a glance
CoroMill All solutions at a glance CoroMill Product overview Milling grades according to groups Shoulder milling CoroMill 316 CoroMill 490 CoroMill 790 Long edge cutter Insert size Max. cutting depth a
Cutting Tools DIGEST Catalog
Cutting Tools DIGEST Catalog Insert Grade CVD Coating Innovation CA5 series Ultra fine interface increases adhesion strength to provide long tool life and stable machining High aspect ratio of α-al 2 O
Optimized flute design Better chip evacuation. Carbide substrate Higher heat resistance, higher speed.
Thread Mills Available for the first time, our solid thread mills are designed to be the highest quality thread milling solution. WIDIA-GTD Cut up to 63 HRC. Improved overall thread quality. Optimized
Think efficiency, Think HSS MILLING
Think efficiency, Think HSS MILLING SUMMARY MILLING TOOLS 2 Zoom on a milling cutter 3 Which HSS for maximum efficiency? 4 Coatings for the best performance 5 Vocabulary 6 Choose the right design 7 Select
Speed (SFM) Radial DOC x D. .5 x D. 1 x D. .5 x D. 1 x D. .5 x D.
GP High Performance 4 Flute End Mills TyCarb GP High Performance end mills feature Differential flute spacing to achieve virtually chatter free machining in a wide range of materials. Excellent results
Seco NewS Summary
Seco NewS Summary 2014-1 2 overcoming your challenges At Seco, every action we take is calculated to overcome the challenges you face today and will face tomorrow. Our global team partners closely with
90 Long Edge Helical End Mill
Limited Package Time Savings Savings on Techniks on Long Edge Milling End Tools Mills 90 Long Edge Helical End Mill For heavy-duty roughing including: slotting, profiling, deep shoulder cutting and ramping
Copy Milling Program Tools
Millstar face mills are equally useful on newer high velocity machines and older slower equipment and will optimize milling performance of all your machine tools. The hardened tool bodies can be run at
PROMO PRICING EXPIRES MAY 31ST, 2018
PROMO PRICING EXPIRES MAY 31ST, 2018 Available From: Specifications are subject to change without notice. No responsibility for errors and/or printing errors will be accepted. High Feed HF Milling Program
MillLine Tungaloy Report No. 429-US www.tungaloyamerica.com Exceptional productivity for aluminum and non-ferrous material machining! www.tungaloyamerica.com MillLine V-shaped bottom secures insert on
Indexable endmill for high precision finishing
MillLine Tungaloy Report No. 431-US BALLFINISH-NOSE Indexable endmill for high precision finishing ACCELERATED MACHINING MillLine Excellent surface finish and stable machining due to secure clamping and
CUTTING TOOLS FROM SANDVIK COROMANT. Small part machining TURNING PARTING AND GROOVING THREADING MILLING DRILLING
CUTTING TOOLS FROM SANDVIK COROMANT Small part machining TURNING PARTING AND GROOVING THREADING MILLING DRILLING Table of contents Introduction 2 Sliding head machines 4 Ordering information 55 Application
CUTTING TOOLS FROM SANDVIK COROMANT. Small part machining TURNING PARTING AND GROOVING THREADING MILLING DRILLING
CUTTING TOOLS FROM SANDVIK COROMANT Small part machining TURNING PARTING AND GROOVING THREADING MILLING DRILLING Table of contents Introduction 2 Sliding head machines 4 Ordering information 55 Application
Technical Information for Power Buster
Technical Information for ower Buster Recommended cutting condition ISO Workpiece NC5330 NC335 0.0040.008 0.0040.008 0.0040.008 vg(sfm) High speed NC5330 NC335 Carbon steel 919755591 820656525 755591492
Insert Inch Overview. Insert Overview
Insert Overview The Inserts Millstar inserts are fully ground precision inserts for better chip control, faster metal removal and higher surface accuracies. They are far more accurate than pressed and
Shoulder Mills.
Mill 1-10 Platform...................................................................P2 P20 Mill 1-10, 0 Shoulder Milling Cutters...............................................P2 P12 Mill 1-10, 0 Helical
w w w. i s c a r. c o m Main Photography - ISCAR Ltd. Additional Photography - Warhaftig Venezian
www.iscar.com Global Network Marketing Support Marketing Support & Production Center Make the RIGHT CHOICE A Global Metalworking Company In a world of different languages and different mentalities, it
DIE & MOLD MACHINING TOOL SOLUTIONS FOR INDUSTRIES DM18 HEAD OFFICE
DM18 DIE & MOLD MACHINING TOOL SOLUTIONS FOR INDUSTRIES HEAD OFFICE 211, Sewolcheon-ro, Bupyeong-gu, Incheon, South Korea Phone : +82-32-526-0909 E-mail : yg1@yg1.kr www.yg1.kr Note The new address above
LEADING SOLUTIONS IN THREAD MILLING TECHNOLOGY
LEADING SOLUTIONS IN THREAD MILLING TECHNOLOGY Thread with Maximum Confidence, Depth, Versatility and Economy. Emuge Shur-Thread TM, Threads-All TM, Vario-Z and NPT Solid Carbide Thread Mills; and Gigant-ic
Quick Change Carbide & Steel Boring Bar Instructions Manual
Workpiece Rigidity 1 Work holding Use the proper chuck and jaws to hold the work-piece, to assure that the part is held with maximum rigidity and stability under cutting force. 2 Steady Rest Support When
SPOTLIGHT 2018 METRIC
SPOTLIGHT 2018 METRIC Advanced Threading Solutions Innovative Grooving & Turning Solutions www.vargus.com Thread Turning External Toolholders with Coolant Thru Precise coolant thru, designed to efficiently
Metal Cutting - 5. Content. Milling Characteristics. Parts made by milling Example of Part Produced on a CNC Milling Machine 7.
Content Metal Cutting - 5 Assoc Prof Zainal Abidin Ahmad Dept. of Manufacturing & Industrial Engineering Faculty of Mechanical Engineering Universiti Teknologi Malaysia 7. MILLING Introduction Horizontal
Emuge Chip-Breaking Tapping Technology. Only one Tool, for Horizontal and Vertical Apps! NEW Sizes + Coolant-Fed Taps!
TM Emuge Chip-Breaking Tapping Technology. Only one Tool, for Horizontal and Vertical Apps! NEW Sizes + Coolant-Fed Taps! Emuge Chip-Breaking Technology TM Emuge s new Rekord DZBF Series Taps featuring
Missouri's trusted provider of carbide cutting tools!
45 & 90 Face Mill Packages For facing, plunging, ramping, and pocket milling Missouri's trusted provider 45 Face Mill packages includes SEKT inserts Watch our All-Material Inserts in action! 90 Face Mill
Jet-Stream Modular Carbide & Steel Boring Bar Instructions Manual
Workpiece Rigidity 1 Work holding Use the proper chuck and jaws to hold the work-piece, to assure that the part is held with maximum rigidity and stability under cutting force. 2 Steady Rest Support When
How to reduce vibration in metal cutting. Turning
How to reduce vibration in metal cutting Turning Introduction Vibration in metal cutting is familiar to every machine tool operator. This phenomena is recognised in operations such as internal turning,
Hybrid TAC Mill Series Next generation TAC endmills allow one tool for various types of machining
No.011-USA April 2009 Small diameter endmills able to handle various machining modes Hybrid TAC Mill Series Next generation TAC endmills allow one tool for various types of machining Hybrid TAC Mills provide
Typical Parts Made with These Processes
Turning Typical Parts Made with These Processes Machine Components Engine Blocks and Heads Parts with Complex Shapes Parts with Close Tolerances Externally and Internally Threaded Parts Products and Parts
18mm Insert Face Mill
January 2005 / NEW-033 PAGE 1 OF 9 18mm Insert Face Mill MATERIAL Cast Iron, Stainless Steel, Carbon Steel, Hi-Temp Alloys, Titanium, Inconel DIAMETER RANGE 3.00" - 12.00" LEAD ANGLES 0º and 45º INSERT
Application and Technical Information Thread Milling System (TMS) Minimum Bore Diameters for Thread Milling
Inserts Application and Technical Information Minimum Bore iameters for Thread Milling UN-ISO-BSW tpi 48 3 4 0 16 1 10 8 7 6 5 4.5 4 Technical ata Accessories Vintage Cutters Widia Cutters Thread Milling
FMA 2000 / 5 FMA 63 / 5 FM 1000 / FM 25 / Copy Milling Program Tool Contents. Milling Cutters Identification System Arbor
Copy Milling Program Tool Contents FM Style 1 Toroid Cylindrical End Milling Cutter 42/43 FM Style 2 Toroid Taper End Milling Cutter 42/43 FMA Arbor Style Milling Cutter 42/43 Insert ata 44/45 Cutting
90 Indexable Positive Milling Cutter
90 Indexable Positive Cutter Inserts HIGH POSITIVE 90 MILLING CUTTER Cutting Rake - 20 for 11 positive 85 parallelogram AP inserts Application TOOL ANGLES: Cutting Rake +20 Axial Rake 6 Radial Rake -6
SINGLE POINT TOOLS. Mini Boring Bars Mini Boring Bars come in a range of diameters from to inch. They are fluted for maximum strength.
SINGLE POINT TOOLS All single point tools are designed for internal machining on a lathe. The helical boring bars can be used for both lathe and mill applications. All cutting tools are made from premium
Miniature shoulder milling cutter with incomparable stability
MillLine Tungaloy eport No. 56-US TUCE-EC Miniature shoulder milling cutter with incomparable stability 2 TUCE-EC 2 TU TU TU TU TU TU TU T C C C C C C C C C CE- E- E- E- E- E- E- E- E E E E E E E C ACCELEATED
SECO CUTTER EXCHANGE PROGRAM SWITCH TO SECO & SAVE
SECO CUTTER EXCHANGE PROGRAM SWITCH TO SECO & SAVE Seco s partnership with distributors who share our passion for the success of their customers and knowledge about the cutting world is critical to our
Chapter 23 Drilling and Hole Making Processes. Materials Processing. Hole Making Processes. MET Manufacturing Processes
MET 33800 Manufacturing Processes Chapter 23 Drilling and Hole Making Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Materials Processing
Valid from April 1st to September 30th, 2016
PROMOTIONS 2016 Valid from April 1st to September 30th, 2016 MillLine Valid from April 1st to September 30th, 2016 Cost effective shoulder milling cutter for high productivity DoForce-Tri is a new series
FMA 2000 / 5 FMA 63 / 5 FM 1000 / FM 25 / Copy Milling Program Tool Contents. Milling Cutters Identification System Arbor
Copy Milling Program Tool Contents FM Style 1 Toroid Cylindrical End Milling Cutter 38/39 FM Style 2 Toroid Taper End Milling Cutter 38/39 FMA Arbor Style Milling Cutter 38/39 Insert ata 40/41 Cutting
VSM11. WIDIA Victory Shoulder Mill 11 VSM11
WIDIA Victory Shoulder Mill 11 VSM11 Victory Shoulder Mill 11 is a high-performance, versatile, robust, 90 square shoulder milling platform. VSM11 is designed for versatility, low horsepower consumption,
T360. Holders and Inserts - T-Cap. Features T333. Holders T335. Inserts T336. Clamping units T337. Sleeves for clamping units T338.
T358 T329 Holders and Inserts - T-Cap Features Holders Inserts Clamping units Sleeves for clamping units T-CAP Kits T333 T335 T336 T337 T338 T339 User Guide Comparison test results Surface finish Tool
+1-508-653-8897 800-992-4766 www.toolmex.com Dear Valued Customers, The TMX Team have broadened our line of round cutting tools and holders to ensure that you have the productivity tools that you need
BIG GOURMAND SNGX 13 LNET 16 HELICAL MILLING CUTTERS FOR ROUGHING.
BIG GOURMAN www.pramet.com HELICAL MILLING CUTTERS FOR ROUGHING SNGX 13 LNET 16 New helical milling cutters for roughing New concept of milling cutters Indexable inserts with 8 cutting edges Ideal clamping
Broaching, External External Broach Tool Holders...18 Driven Broach Tool Holder for Multi's External Broaches...19
TABLE OF CONTENTS CATALOG 2017 TITLE PAGE Broaching, Internal Swiss Adjustment Free Broach Tool Holders...8 Swiss Broaching Heads for ER Collet Chucks...7 Adjustable Broach Tool Holders...10 CNC Adj. Free
GENERAL MACHINING PRACTICE FOR CMI ELECTROMAGNETIC IRON
GENERAL MACHINING PRACTICE FOR CMI ELECTROMAGNETIC IRON Electromagnetic Iron can be readily machined when proper tool angles are used. Tools should be ground to more acute cutting edge angles than are
TOOLS NEWS B228G. Ceramic End Mills. CERAMIC Corner Radius End Mills. Ultra high productivity for nickel based heat resistant alloys CERAMIC
Ceramic End Mills TOOLS NEWS B228G CERAMIC Corner Radius End Mills Ultra high productivity for nickel based heat resistant alloys CERAMIC CERAMIC End Mill Series From difficult-to-cut to easy-to-cut! Generation
with better tools from Introducing: Dapra's New Modular Heads Designed to Screw On to Industry Standard Systems
CUTTING Times Vol. 4, Issue 1 with better tools from Dapra Corporation 66 Granby Street, Bloomfield, CT 06002 1-800-243-3344 860-242-8539 Fax 860-242-3017 Email info@dapra.com www.dapra.com Introducing:
Shoulder Mills.
Mill 1-10 Platform...................................................................P2 P20 Mill 1-10, 0 Shoulder Milling Cutters...............................................P2 P12 Mill 1-10, 0 Helical
User s Guide. Silent Tools. turning products
User s Guide Silent Tools turning products Introduction This guide will help you to use dampened boring bars (Silent Tools) to achieve the best possible results in internal turning. Silent Tools dampened
VSM11. WIDIA Victory Shoulder Mill 11 VSM11
Victory Shoulder Mill 11 ADVANCES 2015 WIDIA Victory Shoulder Mill 11 VSM11 Victory Shoulder Mill 11 is a high-performance, versatile, robust, 90 square shoulder milling platform. VSM11 is designed for
NEW. MILLLINE High Speed Milling Cutter. Exceptional productivity for aluminum and non-ferrous machining. Keeping the Customer First
Keeping the Customer First Tungaloy Report No. 429-US MILLLINE High Speed Milling Cutter NEW Exceptional productivity for aluminum and non-ferrous machining NEW CHIPBREAKER Outstanding productivity in
STUB ACME - INTERNAL AND EXTERNAL
STUB ACME - INTERNAL AND EXTERNAL SOLID CARBIDE SINGLE PROFILE ACME Q A 29º B C S Solid carbide for maximum tool rigidity coating for increased performance Single start threads only SPECIALTY PORT - CAVITY
MFH High Efficiency and High Feed Cutter
Milling MFH High Efficiency and High Feed Cutter MFH High Efficiency and High Feed Cutter Resistant to chattering with 3D convex cutting edge. Multi-functional cutter for ramping, helical milling, etc.
NPA. New Tools with Rigid Clamp/Nozzle for Through-Coolant Directed to the Cutting Edge. New Product Announcement
NPA New Product Announcement Page 1 / 10 New Tool Holder with 3 Inlets for Coolant New Tools with Rigid Clamp/Nozzle for Through-Coolant Directed to the Cutting Edge Page 2 / 10 Highlights ISCAR is expanding
Solid Carbide Thread Milling Cutters
Solid Carbide Thread Milling Cutters Second Edition Thread milling cutters by Features and Benefits: Sub-micro grain carbide substrate Longer tool life with tighter tolerances More cost-effective than
Value-Added Programs. Refurbishment Service. Refurbishment Delivery Service. Just In Time Inventory Programs. Commodity Management
Value-Added Programs ClappDiCO offers a number of value-added programs that reduces our customers manufacturing costs on a per unit basis. Refurbishment Service A complete refurbishment service to restore
MAXIMILL SHOULDER MILLING SYSTEM PRODUCT INFORMATION. Presentation _Customer
MAXIMILL 491 90 SHOULDER MILLING SYSTEM PRODUCT INFORMATION Presentation _Customer 2 \ MAXIMILL 491 PRODUCT LAUNCH AGENDA General information Overall message Unique sales proposition Technical details
Solid Round Tools. Solid Carbide Drills Reamers End Mills Thread Mills HSS Taps. Versatile Optimized Customized
Solid Round Tools Solid Carbide Drills Reamers End Mills Thread Mills HSS Taps V O C Versatile Optimized Customized Content Introducing Solid Round Tools Product portfolio How to find the right product
Keeping the Customer First. Tungaloy Report TE1008-E5. Multi-functional endmill EVX. with centre cutting edge for plunge milling
Keeping the Customer First Tungaloy Report TE1008-E5 Multi-functional endmill EVX with centre cutting edge for plunge milling with centre cutting edge for plunge milling Features Modern machining processes
Hertel Indexable Drills (HID)
Hertel Indexable Drills (HID) mscdirect.com/hertel DESIGNED TO DELIVER Hertel cutting tools are designed to deliver consistency, reliability, durability and value with every cut. For over 65 years, Hertel
EXTREME VERSATILITY. SHEAR POWER. POW. R. FEED M9 SERIES FRACTIONAL CATALOG. More slicing power. More profit by the slice.
EXTREME VERSATILITY. SHEAR POWER. POW. R. FEED M9 SERIES FRACTIONAL CATALOG More slicing power. More profit by the slice. CONTENTS: Redefining high performance and versatility. Get chatter-free machining,
Thread Mills. Solid Carbide Thread Milling Cutters
Thread Mills Solid Carbide Thread Milling Cutters Thread milling cutters by Features and Benefits: Sub-micro grain carbide substrate Longer tool life with tighter tolerances More cost-effective than indexable
Pro-X Mill. Milling Tool for High Quality Aluminum Machining. Clamping system for high speed. Chip breaker 3-dimensional design for low cutting load
Pro-X Mill Milling Tool for High Quality Aluminum Machining Clamping system for high speed Strong clamping due to the concave design of insert bottom Chip breaker 3-dimensional design for low cutting load
Features. High Positive Rake Angle. Multi-Side Grinding. High Speed, High Feed Rate. Economical
Engraving This is a revolutionary new concept of engraving tools with indexable carbide inserts. They offer you the ability to produce HIGH QUAITY ENGRAVING in most materials. The latest coated carbide
IASM /ASM. Small Diameter, Ultra High-Efficiency Indexable End Mills MODULAR STYLE FEATURES
IASM /ASM Small Diameter, Ultra High-Efficiency Indexable End Mills MODULAR STYLE FEATURES Small Diameter sizes from Ф3/8 to 3/4 (10mm to 20mm) can be used instead of solid end mills. JDMT inserts are
FMAX. Feed Maximum (FMAX) milling cutter for ultra efficient and accurate finishing. TOOLS NEWS. High Feed Finish Milling Cutter for Aluminum Alloys
High Feed Finish Milling Cutter for s TOOLS NEWS 2017.4 Update B216G FMAX Item Expansion Feed Maximum (FMAX) milling cutter for ultra efficient and accurate finishing. By CG image High Feed Finish Milling
METRIC THREAD MILLS SINGLE PROFILE (SPTM) - SOLID CARBIDE. Scientific Cutting Tools, Inc. Q A C OAL 60º THREAD MILLS METRIC
METRIC SINGLE PROFILE (SPTM) - SOLID CARBIDE METRIC Q A B 60º C S With just 19 varieties of Thread Mills, fine and coarse threads ranging from M1.2 to M30+ can be milled SPECIALTY PORT - CAVITY INDEXABLE
SHEAR IT. CLEAR IT. STREAKERS END MILLS M2 SERIES FRACTIONAL CATALOG. Put aluminum in its place.
SHEAR IT. CLEAR IT. STREAKERS END MILLS M2 SERIES FRACTIONAL CATALOG Put aluminum in its place. CONTENTS: 4 STREAKERS M2 Features IMCO s unique design makes the entire STREAKERS M2 Series first-rate roughers
CONTENTS WELCOME TO THE WORLD OF HIGH-SPEED INNOVATION
Colibri Spindles ltd. Lavon Industrial Park, 2011800, Israel Tel +972 4 9089100 Fax +972 4 9589061 marketing@colibrispindles.com www.colibrispindles.com HSM JET SPINDLE TJS-CS01-07-2017 Case Study Summaries
Plus Our NEW Quick Delivery Step Drill Program
LE ADING SOLUTIONS FOR CHAMFERED / THRE ADED HOLES Plus Our Quick Delivery Step Drill Program CHAMFERED / THREADED HOLE SOLUTIONS From standard stocked tools to our Quick Delivery Program a full range
New Standard Line for Heavy Duty Applications with Extra Large Pitches up to 24mm or 1tpi
www.vargus.com For Extra Large Pitches New Standard Line for Heavy Duty Applications with Extra Large Pitches up to 24mm or 1tpi Offering a wide range of profiles for internal and external applications:
Keeping the Customer First Tungaloy Report No. 369-J Tungaloy Report No. 372-US Face milling cutter NEW New grades TEN / EEN type extended version
Keeping the Customer First Tungaloy Report No. 369-J 37-US cutter NEW TEN / EEN type New grades extended version Highly productive and economical face milling cutter! T UNGALOY Features Double sided pentagonal
11/15/2009. There are three factors that make up the cutting conditions: cutting speed depth of cut feed rate
s Geometry & Milling Processes There are three factors that make up the cutting conditions: cutting speed depth of cut feed rate All three of these will be discussed in later lessons What is a cutting
and AM-CAT-COREV(GB)-11/08 High Performance Indexable Insert Systems
and AM-CAT-COREV(GB)-11/08 High Performance Indexable Insert Systems Allied Maxcut Engineering Co. Limited AMEC Indexable Drill Range The AMEC range of adjustable indexable carbide drills provides the
INDEX. List Price Catalog - Current Pricing On Our Website. List Price Catalog - Check Website For Current Pricing. * = additional sizes added
INDEX List Price Catalog - Check Website For Current Pricing * = additional sizes added PG CATEGORY NOTE 4 Threadmill - UNC/UNF * 5 Threadmill - UNC/UNF (Continued) & Thread Pac 6 Threadmill - NPT/NPTF
BORING. Applications. Products. Spare parts Cutting data and chip control. Roughing
Content Applications Tool selection guide Roughing inishing/reaming Products Roughing Coroore 820 - Three insert design Coromant Capto and SK - 1.378-12.047 inch 4 5 7 8 General Turning Duoore - Two insert
323 and 365 Series SmoothFlute Variable Helix End Mills
323 and 365 Series SmoothFlute Variable Helix End Mills 323-365 High Speed Machining / HSM as well as traditional milling. Designed for advanced tool path software. Variable Helix where the helix changes
Internal Grooving Application Added for ISCAR s Indexable Multifunction Tools
JANUARY Page 1 / 7 Internal Grooving Application Added for ISCAR s Indexable Multifunction Tools JANUARY Page 2 / 7 Highlights ISCAR is introducing new tools which can carry the current multifunction XCMT-MF
DRV Magic Drill. High Efficiency Indexable Drill. Economical Inserts with 4 Cutting Edges and Excellent Chip Evacuation
DRV Magic Drill High Efficiency Indexable Drill Economical Inserts with 4 Cutting Edges and Excellent Chip Evacuation xd to 6xD drilling lineup with 4 chipbreakers for various machining applications High
AXD TOOLS NEWS. Multi functional milling cutter for high speed & performance machining of aluminum and titanium alloys. B116E
TOOLS NEWS For Machining of Aluminium and Titanium Alloys AXD 2014.01 Update B116E Multi functional milling cutter for high speed & performance machining of aluminum and titanium alloys. For Machining
Flame. Tree Pointed. Product Barcode Price Ø Length Shank Code
Workshop Range 28 Carbide Burs 29 HSS Countersinks 29 HSS Deburring 30 HSS Step Drills 30 Thread Gauges 31 Warragul Dies 32 Screw Extractors 33 Grabit Screw Extractors 34 Black Books Are you passionate
No Super Excellent MINI ASM Type. Introducing new JP/JM coating JP4005. Ultra-high efficiency JM4060 NEW PRODUCT NEWS. Small tool diameter,
NEW PRODUCT NEWS No.0 Patent Pending Super Excellent INI AS Type Grade for processing high-hardness materials Grade for processing stainless-steel materials Introducing new JP/J coating Small tool diameter,
Milling Series. Product Lineup M4. Milling Indexable Inserts. Milling Inserts Identifi cation System M9 Milling Inserts. Corner Angle 45 MOF45
1~12 eries Product ineup Indexable Inserts Inserts Identifi cation ystem Inserts 1 Corner Angle OF 22 OFX Easy edge adjustment 2 E 2 E-F Easy edge adjustment 28 D 1 O- / O / O- 2 Corner Angle R P / E Corner
Automotive. Tooling Solutions. Providing Optimal Tooling Solutions for Automotive Machining
Automotive Tooling Solutions Providing Optimal Tooling Solutions for Automotive Machining Crankcase Cylinder Heads Crankshafts Camshafts Connecting Rods Valve Bodies Synchronizer Gears Main Shafts CVT
UN THREAD MILLS SINGLE PROFILE (SPTM) - SOLID CARBIDE. Scientific Cutting Tools, Inc. OAL 60º THREAD MILLS
UN SINGLE PROFILE (SPTM) - SOLID CARBIDE UN Q A B 60º C S Fine and coarse threads ranging from #00 to 1¼ + can be milled using the 19 varieties of these single profile thread mills. SPECIALTY PORT - CAVITY
CARBIDE END MILLS SPECIFICATIONS
SPECIFICATIONS COATING GUIDE Material Hardness TiN TiCN TiALN Austentic Stainless Steel < 35 HRc * X Martinistic Stainless Steel < 35 HRc * X Martinistic Stainless Steel >= 35 HRc X PH Stainless Steel
New Version. High performance economical double sided inserts with 4 cutting edges! Shoulder milling cutter. Featuring new 18 size insert NEW
Keeping the Customer First Tungaloy Report No. 390-US Shoulder milling cutter Version Featuring new 18 size insert High performance economical double sided inserts with 4 cutting edges! NEW LQMU11 LQMU18