NPA. New Tools with Rigid Clamp/Nozzle for Through-Coolant Directed to the Cutting Edge. New Product Announcement
|
|
- Shanon Stevens
- 5 years ago
- Views:
Transcription
1 NPA New Product Announcement Page 1 / 10 New Tool Holder with 3 Inlets for Coolant New Tools with Rigid Clamp/Nozzle for Through-Coolant Directed to the Cutting Edge
2 Page 2 / 10 Highlights ISCAR is expanding the JHP Line by adding turning tools fitted with JETRTURN hollow Rigid Clamp that serves also as coolant nozzle. Until now, ISOTURN tools featuring the JHP cooling option were designed with a lever clamping mechanism, as an upper clamp would obstruct the coolant jet from reaching the cutting edge. The new design integrates the JETRTURN hollow Rigid Clamp, which allows JHP coolant to reach the cutting edge without any obstacles. The Rigid Clamp is a strong and reliable clamping mechanism that provides excellent performance even during heavy and interrupted cut machining. NEW Click Link to See Short Video
3 New Product Announcement Page 3 / 10 In the first stage, ISCAR offers tools with JETRTURN Rigid Clamp mechanism for the most popular standard CNMG, WNMG and DNMG insert geometries. Features Strong and reliable clamping mechanism prolongs tool life Coolant jet directed to the cutting edge Excellent corner location repeatability Excellent performance in heavy cut machining
4 Page 4 / 10 The new external tools feature three coolant connection options: Rear threaded inlet Bottom threaded inlet Bottom inlet for adjustable shank overhang, as in ISCAR s JHP-MC tools All external tools are equipped also with a frontal bottom coolant outlet directed to the insert flank, which enhances the cooling effect. Note The through-tool coolant provides improved tool life, chip control and productivity advantages when high pressure coolant is induced. In addition, the bar standard pressure provides better performance when compared to external cooling results.
5 Page 5 / 10 DDJNR/L-JHP-MC Rigid Clamp Tools with Channels for High Pressure Coolant Carrying the 55 Rhombic Inserts GAMF GAMP 27 MAX 93 º WF H B 93 LH Designation B H LH WF GAMP GAMF Insert DDJNR/L 2020X-15-JHP-MC DNMG/X 1506 DDJNR/L 2525X-15-JHP-MC DNMG/X 1506 Spare Parts Designation Seat Clamp Key Plug Screw DDJNL 2020X-15-JHP-MC RDT 443 LCGL-4JC SET T-20/3 PLG 1/8BSP TL360 SR DDJNR 2020X-15-JHP-MC RDT 433 LCGR-4JC SET T-20/3 PLG 1/8BSP TL360 SR DDJNL 2525X-15-JHP-MC RDT 433 LCGL-4JC SET T-20/3 PLG 1/8BSP TL360 SR DDJNR 2525X-15-JHP-MC RDT 433 LCGR-4JC SET T-20/3 PLG 1/8BSP TL360 SR DCLNR/L-JHP-MC Rigid Clamp Tools with Channels for High Pressure Coolant Carrying the Rhombic Inserts 95 º GAMF GAMP 95 º WF H B 95 LH Designation B H LH WF GAMP GAMF Insert DCLNR/L 2020X-12-JHP-MC CNMG 1204 CNMX 1207 DCLNR/L 2525X-12-JHP-MC CNMG 1204 CNMX 1207 Spare Parts Designation Seat Clamp Key Plug Screw DCLNL 2020X-12-JHP-MC RCT 443 LCGL-4JC SET T-20/3 PLG 1/8BSP TL360 SR DCLNR 2020X-12-JHP-MC RCT 443 LCGR-4JC SET T-20/3 PLG 1/8BSP TL360 SR DCLNL 2525X-12-JHP-MC RCT 443 LCGL-4JC SET T-20/3 PLG 1/8BSP TL360 SR DCLNR 2525X-12-JHP-MC RCT 443 LCGR-4JC SET T-20/3 PLG 1/8BSP TL360 SR
6 Page 6 / 10 DWLNR/L-JHP-MC Rigid Clamp Tools with Channels for High Pressure Coolant Carrying the Trigon Inserts 95 GAMF GAMP 95 WF H B 95 LH Designation B H LH WF GAMP GAMF Insert DWLNR/L 2020X-08-JHP-MC WNMG 04 DWLNR/L 2525X-08-JHP-MC WNMG 04 Spare Parts Designation Seat Clamp Key Screw Plug DWLNL 2020X-08-JHP-MC RWT 443 LCGL-4JC SET T-20/3 SR PLG 1/8BSP TL360 DWLNR 2020X-08-JHP-MC RWT 443 LCGR-4JC SET T-20/3 SR PLG 1/8BSP TL360 DWLNL 2525X-08-JHP-MC RWT 443 LCGL-4JC SET T-20/3 SR PLG 1/8BSP TL360 DWLNR 2525X-08-JHP-MC RWT 443 LCGR-4JC SET T-20/3 SR PLG 1/8BSP TL360 A-DCLNR-JHP Lever Lock Boring Bars Carrying the Negative CNMX/CNMG Rhombic Inserts GAMF DMIN GAMP 95º WF 95 LDRED A-A Designation LDRED WF GAMP GAMF DMIN A32T DCLNR-12-JHP Spare Parts Designation Seat Clamp Key Screw Fitting Plug A-DCLNR-JHP TCN 423 LCGL-4JC SET T-20/5 SR M PL 32 SR M4X4 DIN913 TL360
7 Page 7 / 10 VDI-B1/B4A-JHPMC Radially Oriented, Short, Right-Hand Holders with VDI DIN698 Shanks for Square Shank Tools OF G1/8 2 Designation OF VDI16 B1A JHPMC VDI16 B4A JHPMC VDI20 B1A JHPMC VDI20 B4A JHPMC VDI25 B1A JHPMC VDI30 B1B4A JHPMC VDI40 B1B4A JHPMC VDI50 B1B4A JHPMC Form B1 radial R.H. short, form B4 radial overhead L.H. short. VDI-B1/B4AK-JHPMC Radially Oriented, Short, Right-Hand, Wedge Clamping Holders with VDI DIN698 Shanks for Square Shank Tools 22 G1/8 Designation VDI30 B1B4AK JHPMC VDI40 B1B4AK JHPMC VDI50 B1B4AK JHPMC Form B1 radial R.H. short, form B4 radial overhead L.H. short.
8 Page 8 / 10 VDI-B2/B3A-JHPMC Radially Oriented, Short, Left-Hand Holders with VDI DIN698 Shanks for Square Shank Tools OF 2 Designation OF VDI16 B2A JHPMC VDI16 B3A JHPMC VDI20 B2A JHPMC VDI20 B3A JHPMC VDI25 B2A JHPMC VDI30 B2B3A JHPMC VDI40 B2B3A JHPMC VDI50 B2B3A JHPMC Form B2 radial L.H. short, form B3 radial overhead R.H. short. VDI-B2/B3AK-JHPMC Radially Oriented, Short, Left-Hand, Wedge Clamping Holders with VDI DIN698 Shanks for Square Shank Tools 22 Designation VDI30 B2B3AK JHPMC VDI40 B2B3AK JHPMC VDI50 B2B3AK JHPMC Form B2 radial L.H. short, form B3 radial overhead R.H. short.
9 Page 9 / 10 VDI-C1/C4A-JHPMC Axially Oriented, Short, Right-Hand Holders with VDI DIN698 Shanks for Square Shank Tools OF 2 Designation OF VDI16 C1C4A JHPMC VDI20 C1C4A JHPMC VDI25 C1C4A JHPMC VDI30 C1C4A JHPMC VDI40 C1C4A JHPMC VDI50 C1C4A JHPMC Form C1 axial R.H., form C4 axial overhead L.H. short. VDI-C1/C4AK-JHPMC Axially Oriented, Short, Right-Hand, Wedge Clamping Holders with VDI DIN698 Shanks for Square Shank Tools 2 OF Designation OF VDI30 C1C4AK JHPMC VDI40 C1C4AK JHPMC VDI50 C1C4AK JHPMC Form C1 axial R.H., form C4 axial overhead L.H. short.
10 Page 10 / 10 VDI-C2/C3A-JHPMC Axially Oriented, Short, Left-Hand Holders with VDI DIN698 Shanks for Square Shank Tools OF 2 Designation OF VDI16 C2C3A JHPMC VDI20 C2C3A JHPMC VDI25 C2C3A JHPMC VDI30 C2C3A JHPMC VDI40 C2C3A JHPMC VDI50 C2C3A JHPMC Form C1 axial R.H., form C4 axial overhead L.H. short. VDI-C2/C3AK-JHPMC Axially Oriented, Short, Left-Hand, Wedge Clamping Holders with VDI DIN698 Shanks for Square Shank Tools OF 2 Designation OF VDI30 C2C3AK JHPMC VDI40 C2C3AK JHPMC VDI50 C2C3AK JHPMC Form C2 axial L.H., form C3 axial overhead R.H. short.
Lathe Tool Holders. Catalog Number Gage Insert H B H1 L F L1 Shim Options Right Hand Left Hand Shank. Shank Width ±.15. Height ±.10. Shank Width ±.
Lathe Tool Holders U.S. Patent 0 other US & foreign patents pending Specifications are subject to change without notice DWLNR/L - WNMG, 0 Trigon This tool is designed for primarily turning applications
More informationPROMOTIONS2014. Valid from February 17 to June 30,
PROMOTIONS2014 Valid from February 17 to June 30, 2014 www.iscarmetals.com Double-Sided Profiling Inserts with Six.250" Corner Radii The HELIDO H606 line is an economical tool and insert system which features
More informationValid from April 1 until December 31, 2019 Imperial Version OFFERS SPECIAL INNOVATION 2019 MACHINING TELLIGENTLY.
Valid from April until December 3, 09 Imperial Version OFFERS SPECIAL MACHINING 4.0 INDUSTRY TELLIGENTLY www.iscar.ca The Smallest Helical Indexable Multi-Toothed Endmill for 90 Shoulder Milling 3 30 X
More informationTechnical features. Positive Taper Lock System for manual tool clamping. Technical features:
clamping set Technical features The RÖHM- was specially designed for the positive taper lock clamping taking particulary into account the necessity of manual clamping. Technical features: strong design
More informationDouble Clamp Series TOOLS NEWS. New Clamp Bridge Simple and highly rigid clamping. Single Action Type B091G Update
Single Action Type TOOLS NEWS 2015.5 Update 091G Double Series New Simple and highly rigid clamping y A simple, secure clamping system ensures stable machining. y New holders for VN type 35 rhombic inserts.
More informationNPA. Anti-Vibration Boring Bars with Exchangeable Turning Heads. New Product Announcement. Page 1 / 11
NPA New Product Announcement Page 1 / 11 Anti-Vibration Boring Bars with Exchangeable Turning Heads Page 2 / 11 Highlights ISCAR is introducing a new line of vibration dampening boring bars intended for
More informationInternal Grooving Application Added for ISCAR s Indexable Multifunction Tools
JANUARY Page 1 / 7 Internal Grooving Application Added for ISCAR s Indexable Multifunction Tools JANUARY Page 2 / 7 Highlights ISCAR is introducing new tools which can carry the current multifunction XCMT-MF
More informationACCESSORIES CATALOG. SKODA LIVE CENTERS BORING AND FACING HEADS
ACCESSORIES CATALOG BORING AND FACING HEADS SKODA LIVE CENTERS www.sowatool.com SKODA LIVE CENTERS Skoda Heavy Duty Live Centers - CSN 4334/CSN 4334M Features The rotating spindle is extended right through
More informationJet-Stream Modular Carbide & Steel Boring Bar Instructions Manual
Workpiece Rigidity 1 Work holding Use the proper chuck and jaws to hold the work-piece, to assure that the part is held with maximum rigidity and stability under cutting force. 2 Steady Rest Support When
More informationACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS SKODA LIVE CENTERS SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two
More informationPARTING ISCAR PARTING USER GUIDE. Parting and Grooving. Insert Positioning
90 80 0 70 10 60 20 50 30 40 Parting and Grooving Selection of Inserts For a proper match of insert and cutting material to application, the following variables must be taken into consideration: Width
More informationSKODA LIVE CENTERS. Skoda & Sowa Heavy Duty Live Centers - CSN PARTS FOR HEAVY DUTY LIVE CENTERS. Parts For Heavy Duty Live Centres
Skoda & Sowa Heavy Duty Live Centers - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two specially designed adjustable needle-roller bearings carry all radial loads
More information90 Long Edge Helical End Mill
Limited Package Time Savings Savings on Techniks on Long Edge Milling End Tools Mills 90 Long Edge Helical End Mill For heavy-duty roughing including: slotting, profiling, deep shoulder cutting and ramping
More informationT360. Holders and Inserts - T-Cap. Features T333. Holders T335. Inserts T336. Clamping units T337. Sleeves for clamping units T338.
T358 T329 Holders and Inserts - T-Cap Features Holders Inserts Clamping units Sleeves for clamping units T-CAP Kits T333 T335 T336 T337 T338 T339 User Guide Comparison test results Surface finish Tool
More informationin perfect order Gripping under pressure Cleaning Unit rgg for your machine room Manufacturing more efficiently!
in perfect order Gripping under pressure Cleaning Unit rgg for your machine room Vacuum gripper solves your time and cost goals Vacuum functionality can be implemented without an additional vacuum connection
More informationHow to choose your turning tool
GNRAL TURNING General Turning GNRAL TURNING How to choose your turning tool How to choose your turning tool 1 Overview of tooling alternatives Choose Coromant Capto or shank tool, depending on clamping
More informationPROMOTIONS2015. Machining Intelligently KIT DEMO KIT. Valid until February 28, 2015 IQ ISCAR HIGH Q LINES.
PROMOTIONS2015 Valid until February 28, 2015 IQ IQ DEMO KIT KIT www.iscar.com KIT 1 Promo Code #IQV8 TURNING - Economy and Heavy Cut ISO style inserts, used in all machine shops, historically represent
More informationHydraulic Chuck Reducer Sleeves
Hydraulic Chuck Reducer Sleeves with ERICKSON SAFE- OCK Smart Coolant Primary Application ERICKSON Safe-Lock Smart Coolant reducer sleeves are specially designed for high-precision and secure clamping
More informationSimple and highly rigid clamping
New 091G Single Action Type DOULE CLAMP SERIES Simple and highly rigid clamping y A simple, secure clamping system ensures stable machining. y New holders for VN type 35 rhombic inserts. Series expansion.
More informationFEATURING .35 $130 MDT & GROOVING PRODUCTIVITY KITS 20 % 35 % Prices Effective July 1, 2017 Thru September 30, 2017
Micro Deburring Set Model FT3000 20 % MDT & GROOVING PRODUCTIVITY KITS CP500 UP TO $130 Aluminum Oxide Grain Quick Change Abrasive Discs 20 % 0-6 Dial-Cal Calipers with Free Swiss Army Knife $ 22 16 A
More informationFITTINGS & GAUGES 20,000 PSI
PRESSURE GAUGE Features 4" high visibility face with laminated safety glass dial cover Accurate within +/- 0.5% of full scale range Stainless steel case and internals Heavy-duty movement Glycerine-filled
More informationTooltech Precision Reamers are designed to meet hole geometry requirements in the complex and demanding machining environment of today s manufacturing
BLADED REAMERS Tooltech Precision Reamers are designed to meet hole geometry requirements in the complex and demanding machining environment of today s manufacturing industry. The innovative design of
More informationSPOTLIGHT 2018 METRIC
SPOTLIGHT 2018 METRIC Advanced Threading Solutions Innovative Grooving & Turning Solutions www.vargus.com Thread Turning External Toolholders with Coolant Thru Precise coolant thru, designed to efficiently
More informationNEW. Excellent tool life with new-generation PVD coating! Keeping the Customer First. New PVD coated grade for stainless steel turning
Keeping the Customer First Tungaloy Report No. 399-E New PVD coated grade for stainless steel turning NEW TUNGALOY Excellent tool life with new-generation PVD coating! TUNGALOY TUNGALOY Features Increased
More informationSeco NewS Summary
Seco NewS Summary 2014-1 2 overcoming your challenges At Seco, every action we take is calculated to overcome the challenges you face today and will face tomorrow. Our global team partners closely with
More informationCompetence Gun Boring. KOYEMANN Floating Tools Power Reamer
Competence Gun Boring KOYEMANN Floating Tools Power Reamer R The KOYEMANN Floating Principle Reaming has been used for fine machining bores with excellent results from the very start of cutting technology.
More informationTooling state of the art and unique
Tooling state of the art and unique Sauter innovation factory: The World turns with us. sauter-feinmechanik.com 02 From one single source Sauter Tool Turrets and Sauter Tooling 2 4 5 1 12 11 3 6 7 8 10
More informationUser s Guide. Silent Tools. turning products
User s Guide Silent Tools turning products Introduction This guide will help you to use dampened boring bars (Silent Tools) to achieve the best possible results in internal turning. Silent Tools dampened
More informationSTEADYLINE FOR TURNING, BORING & MILLING REDUCE VIBRATIONS & INCREASE PRODUCTIVITY
STEADYLINE FOR TURNING, BORING & MILLING REDUCE VIBRATIONS & INCREASE PRODUCTIVITY 2 OVERCOME TOOL OVERHANG CHALLENGES When using long overhang tools to machine difficult-to-access areas, such as deep
More informationw w w. i s c a r. c o m
www.iscar.com Railway Industry The railway industry has played an important role in the past two decades becoming one of the leading means of transportation for freight and passengers. Ongoing investments
More informationValid from. MARcH 1 - AUGUST 31,
Valid from MARcH 1 - AUGUST 31, 2014 www.tungaloyamerica.com 1 Choices: Shellmill Type Holder 1) Buy 20 inserts, receive 1 shellmill at 25% off 2) Buy 30 inserts, receive 1 shellmill at 50% off 3) Buy
More information18mm Insert Face Mill
January 2005 / NEW-033 PAGE 1 OF 9 18mm Insert Face Mill MATERIAL Cast Iron, Stainless Steel, Carbon Steel, Hi-Temp Alloys, Titanium, Inconel DIAMETER RANGE 3.00" - 12.00" LEAD ANGLES 0º and 45º INSERT
More informationQuick change for turning centres
Quick change for turning centres Maximized amount of machining time It makes sense to invest in Quick Change clamping units if one of your goals is to maximize the amount of actual machining time on your
More informationLAKSHMI MACHINE WORKS LIMITED COIMBATORE , INDIA
Spare Parts Catalogue for Vario Clean LB9/2 Issue No. : 02 Month / Year : February 2016 Control No. : 63 194 10 00 Revision Date : Spinning System This Catalogue Belongs to the Mill : Order No. : Machine
More informationPCMN. Medium. Semi-Heavy. Standard. Stainless CBN MS. Dimensions Insert Number (mm) Mass (lbs) Order Number. Wrench DCMN. Finish Light Medium Facing
GUIDE TO asection organization zorganized by product series. (Refer to the index on the next page.) PRODUCT TYPE indicates the first four letters of the order number, as well as cutting applications. TITLE
More informationNPA. Expansion of the HM390 Triangular Inserts Line with Tools Carrying 5 mm Edged Inserts. New Product Announcement. Page 1 / 9
NPA Expansion of the HM390 Triangular Inserts Line with Tools Carrying 5 mm Edged Inserts Page 1 / 9 Page 2 / 9 Highlights Tools carrying triangular inserts with 5 mm helical cutting edges Effective and
More informationReaming. Tool Systems
Milling Thread Milling Trapezoid thread ACME thread Knuckle thread TC 50 / TC 80 18-79 1 Face Finish Milling 80-85 2 Notch Impact Test 86-91 3 Gear Milling 92-95 4 Slot Milling 96-123 5 Contour and Radius
More informationParting & Grooving: How to achieve greater performance, quality, and tool life in the 21st century
Technical article May 2015 Parting & Grooving: How to achieve greater performance, quality, and tool life in the 21st century Production engineers faced with overcoming the challenges of parting and grooving
More informationCode Product Qty 1 Top Vertex 3 2 Hot End Housing 1 3 Bottom Vertex 3 4 Print Platform Lock 3 5 End Stop Holder 3 6 Filament Feeder Motor Bracket 1 7
List of Parts Code Product Qty 1 680mm Extrusion 3 2 Power Supply 1 3 240mm Extrusion 9 4 42mm Nema 17 Stepper Motor 3 5 Slider-Hotend Connecting Rod 6 6 48mm Nema 17 Stepper Motor 1 7 Linear Rail with
More informationadaptivemechanical adaptive
Mechanical clamping elements mechanical 6 Content Product group 6 Sliding clamp, mechanical 6.2210 Clamping block, mechanical 6.2212 High-pressure spindle, mechanical with integral wedge system 6.2270
More informationNew Standard Holder for 3ΧD Line
Standard Holder for 3ΧD Line With remarkable market feedback for the multi-functional tool, is expanding the range to accommodate a holder diameter up to 3ΧD as a standard item. While the conventional
More informationSECO NEWS SUMMARY NEW IMAGE NEEDED (PHOTO SHOOT WEEK OF SEPTEMBER 12) THE TOOLS YOU RELY ON TO IMPROVE
SECO NEWS SUMMARY 2017-1 NEW IMAGE NEEDED (PHOTO SHOOT WEEK OF SEPTEMBER 12) THE TOOLS YOU RELY ON TO IMPROVE CONSTANT INVESTMENT IN CONSTANT IMPROVEMENT RE=6 CORNER RADIUS R217/220.28 CUTTER DURATOMIC
More informationPROMOTIONS2016. Machining Intelligently. Self. ISCAR's Winning Edge Machining Innovations. ISCAR ENDUSERS
PROMOTIONS2016 ENDUSERS ISCAR's Winning Edge Machining Innovations Self Excellent Cylindricity and Superb Surface Finish! New Cutters Carrying Square Single-Sided Inserts Endmills with Indexable Solid
More informationTools for Turning Mill
1~12 2~12 HSK-T (ICTM Standard) Tooling 2 Parts Compatibility of Lever Lock Toolholders R42 1 Turning mill is the machine tool which combines turning and milling functions. ow the interface (joint part
More informationClamping tools with flange module
Clamping tools with flange module MAPAL clamping tools with flange module are recommended for machining conditions in which radial run-out and angular error on the machine spindle must be compensated.
More information10 ZX FACING / CONTOURING HEADS 16 ZX MODULAR BORING TOOLS (MBT) 22 ZX VALVE SEAT POCKET TOOLS 31 SPECIAL APPLICATIONS 35 HOW TO REQUEST A QUOTATION
ZX Systems TM FACING, & CONTOURING ZXBORING, SYSTEMS contents 2 OVERVIEW OF ZX BORING, FACING, AND CONTOURING SYSTEMS 10 ZX FACING / CONTOURING HEADS 16 ZX MODULAR BORING TOOLS (MBT) 22 ZX VALVE SEAT POCKET
More informationNew Standard Line for Heavy Duty Applications with Extra Large Pitches up to 24mm or 1tpi
www.vargus.com For Extra Large Pitches New Standard Line for Heavy Duty Applications with Extra Large Pitches up to 24mm or 1tpi Offering a wide range of profiles for internal and external applications:
More informationTOOL HOLDER SYSTEMS FOR
TOOL HOLDER SYSTEMS FOR HAAS OL-1 CNC OFFICE LATHE AND HAAS HPCL CNC TOOLROOM LATHE FOR ANY ADDITIONAL INFORMATION, OR INQUIRIES ON PURCHASING, CONTACT YOUR LOCAL HAAS FACTORY OUTLET ONLINE TECHNICAL INFORMATION
More informationCoroMill. All solutions at a glance
CoroMill All solutions at a glance CoroMill Product overview Milling grades according to groups Shoulder milling CoroMill 316 CoroMill 490 CoroMill 790 Long edge cutter Insert size Max. cutting depth a
More informationAward recommendations highlighted in yellow. Rapid City, SD Quote # Quantity Description of Item Tormach Inc. $48,870.00
Tormach 15L Slant-Pro Deluxe Education Package shall be as follows, and shall include: 1 3 Tormach 15L Slant-Pro CNC Lathe: - 15 Swing over bed diameter - 3HP Spindle - 1.53 Spindle Bore 8-Station Turret
More informationCutting Drilling & Tapping
Cutting Drilling & Tapping Section Dowel Drills - Brad Point.0mm ( W Point) C113 $..0mm ( W Point) C1137 $7.0 $.70.0mm ( W Point) C1138 $9.30 $8.0 8.0mm ( W Point) C1 $9.0 $8.0.0mm ( W Point) C1127 $9.0
More informationHOW TO READ THE STANDARD OF HSK-T TOOLS
HOW TO READ THE STANDARD OF ahow this section page is organised z Organised by product series. (Refer to the index on the next page.) PRODUCT TYPE indicates the first four letters of the order number,
More informationmultidec -LUB INNOVATION INTERNAL COOLING CLAMPING SHIM WITH INTEGRATED COOLING AND FLEXIBLE TOOL STOP
INTERNAL COOLING INNOVATION CLAMPING SHIM WITH INTEGRATED COOLING AND FLEXIBLE TOOL STOP Product line The clamping shim directs the coolant precisely onto the tool insert, even at low pressure. The flexible
More information'\QDPLF# Tooling Catalog 20 0DFK#0DFKLQH#5HVRXUFHV/#,QF1# Phone: (949) Fax : (949)
'\QDPLF# 0DFK#0DFKLQH#5HVRXUFHV/#,QF1# Tooling Catalog 20 Phone: (949) 481-3375 Fax : (949) 481-8559 Multi-Position Tool Stations When fast changeover is critical Ideal for mounting groups of tools for
More informationM1 series 2 way ball valve with integrated Praher Labeling System
General: Material: PVC-U Seal material: EPDM / FPM Ball seating joint: PTFE Dimensions: DN10 DN50 d16 d63 d3/8 d2 Connection types: Solvent socket DIN / ASTM / JIS Solvent spigot DIN Threaded socket BSP
More informationPROMOTIONS2016. Machining Intelligently. Self. ISCAR's Winning Edge Machining Innovations. ISCAR ENDUSERS
PROMOTIONS2016 ENDUSERS ISCAR's Winning Edge Machining Innovations Self Excellent Cylindricity and Superb Surface Finish! New Cutters Carrying Square Single-Sided Inserts Endmills with Indexable Solid
More informationIndexable Center Drill
i-center indexable center drill (patent pending) First Indexable center drill in the world. Shortens set up time and center drilling time. Increases tool life which reduces tooling cost. Special forms
More informationBELCAR PRODUCTS MILLING CUTTERS AND INSERTS TABLE OF CONTENTS
BELCAR PRODUCTS MILLING CUTTERS AND INSERTS TABLE OF CONTENTS MILLING CUTTERS AP9 WELDON / R8 SHANKS ENDMILLS PAGE 2 AP9 SHELL MILL CUTTERS PAGE 3 AP9 LONG EDGE END MILLS PAGE 4 OF HIGH SHEAR OCTAGON CUTTERS
More informationPF 3000 Face Milling Cutter
Perfection in machining PF 3000 Face Milling Cutter UHRIN YOUR WORLD-WIDE PARTNER ADVANTAES axially adjustable inserts standard tool Ø 63 250 available ex-stock reduced spindle loading thanks to light
More informationDouble-sided positive insert for semi-finishing to finishing
MillLine Tungaloy Report No. 508-US DOMINI-MILL Double-sided positive insert for semi-finishing to finishing ACCELERATED MACHINING MillLine DoMini-Mill features the advantage of an economical 6-cornered
More informationDeep Hole Boring Made Simple!
Deep Boring Made Simple! Carbide Boring Bars High performance Carbide Boring Bars Available in Inch and Metric Shank Size Inch 0.156 to 1.250, Metric 4mm to 32mm Integral Thru Carbide Boring System Shank
More informationLightweight HSC milling cutter for a perfect surface finish. flycutter - system eco
Lightweight HSC milling cutter for a perfect surface finish flycutter - system eco 2 milling FlyCutter - System Eco mapal FlyCutter - System Eco The FlyCutter series represent a new dimension in face milling
More informationUPDATED. PCD & CBN Tangential Milling. Features:
Diameters Metric: 5.0 mm 50 mm Inch:.0 0.0 Bodies Cylindrical Shell Type Integral on request UPDATED PCD & CBN Tangential Milling TEDIFEED is the newest line of mill with tangential inserts available with
More informationAPRIL 2009 / NEW-100 / PAGE 1 OF 13
APRIL 2009 / NEW-100 / PAGE 1 OF 13 The standard UNIDEX line covers reaming applications from 5/16 to 1 1/4 diameter. The single indexable blade and high wear resistant carbide or cermet pads provide a
More informationInnovative insert provides superior
TurnLine Tungaloy Report No. 417-US MINIFORCE-TURN Innovative insert provides superior economic advantages! ACCELERATED MACHINING TurnLine VXGU insert, new toolholders, new chipbreaker, and new grades
More informationBoring Milling. MAPAL competence Tools with ISO elements
Boring Milling MAPAL competence Tools with ISO elements Perfect machining technology MAPAL stands for innovative machining solutions with the highest quality, precision and cost-effectiveness. Starting
More informationTooling For Haas Lathes
Tooling For Haas Lathes Performance measured by you Visit Command Tooling Systems on line catalog for Command standard product part file downloads, up-to-date stock levels and our list price instant quoting
More information1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * *
-I Pipe and Bolt Threading Machine Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support ()
More information15L Slant-PRO TM CNC LATHE
15L Slant-PRO TM CNC LATHE INDEX Product Overview p. 2 Specifications p. 3 Options p. 4 Workholding pp. 5-8 Toolholding pp. 9-12 Warranty p. 16 ENABLING YOUR IDEAS Tormach 15L Slant-PRO CNC Lathe PRODUCT
More informationHOW TO READ THE STANDARD OF HSK-T TOOLS
HOW TO READ THE STANDARD OF ahow this section page is organized zorganized by application. (Refer to the index on the next page.) PRODUCT TYPE indicates the first four letters of the order number, as well
More informationMove System Swivel Caster Installation ( )
Move System Swivel Caster Installation (002-10265-00) Caution Always disconnect power to chair before removing covers or performing any service procedures. Step 1: Remove Top Cover A) Position chair to
More informationKTM-16/20 TECHNICAL DATA
TECHNICAL DATA Table Diameter : 1,600mm Max. Turning Diameter : 2,000mm Max. Turning Height : 1,750mm Table Indexing Degree : 0.001mm CNC Controller : FANUC 18i-TB ** Bed The bed has symmetrical structure
More informationCoroChuck 970 SynchroFlex Benefits
Benefits Better surface quality on the flanks of the cut threads Longer tool life due to less friction Greater process security Due to the reduced risk of breaking the tap especially with small dimensions
More informationTAPPING CHUCKS & COLLETS
TAPPING CHUCKS & COLLETS CAT er Tension/Compression Holders 86 CAT er Rigid Holders 86 BT er Tension/Compression Holders 87 BT er Rigid Holders 87 HSK Tension/Compression & Rigid Holders 88 NMTB er Tension/Compression
More informationProduct Overview. for perfect connections
Product Overview for perfect connections TOOL HOLDERS FOR DRILLING, TAPPING & REAMING Smart solutions for high quality clamping systems in tapping applications Tapping solution range from M1 M200 Quick
More informationMission Statement. 2005, Manchester Tool Company. All rights reserved.
Mission Statement Manchester Tool Company shall provide tooling systems to the metal cutting and similar industries, specializing in cutoff, grooving and complimentary niche products. We are dedicated
More informationBSF. Large Ratio Automatic Back Counterboring & Spotfacing Tool
BSF Large Ratio Automatic Back Counterboring & Spotfacing Tool Counterbores up to 2.3xd Replaceable carbide coated blades for extended life Very simple to use Suitable for CNC machines with through coolant
More informationTurning Handbook. General turning - Parting and grooving - Threading
Turning Handbook General turning - Parting and grooving - Threading Your conditions There are several things to consider before starting machining. Component Operation (e.g. external/internal, profiling,
More informationJaw chuck B-Top3 STANDARD CHUCKS. 215 Variant. Jaw chuck B-Top3. Technical data. Size. B-Top3
STANDARD CHUCKS. Technical data A AJ DH AI AT AW T BQ AS Size 215 ariant B-Top3 Concentricity [mm] Max. clamping force [kn] Max. axial drawtube force [kn] RPM n max. [1/min.] Stroke per jaw [mm] Ø Capacity
More informationFeatures. Special forms are possible
Center Drill >> The is a trademark of Nine9, the developer of the first indexable center drill in the world.(patented) Offering an indexable insert system for the 1st time, Nine9 s design improves your
More informationINSTRUCTIONS FOR USE B2 FORM KNURLING TOOL
INSTRUCTIONS FOR USE B2 FORM KNURLING TOOL Contents CONTENTS 1. General... 2 1.1 Introduction... 2 1.2 Tool Construction... 3 2. B2 Tools... 6 2.1 Technical Data... 6 2.2 Overview: Main components... 7
More informationARNO (UK) Limited We have a passion for precision. Holder 1 see page 3. Holder 35. Holders 70 see page 4. see page 5. Save Over 30% see page 8-10
Promotions - 2017 ARNO (UK) Limited NC - Grooving System The flexible solution for both axial and radial grooving SA Part-Off System With or without through tool coolant see page 2 Holder 1 see page 3
More informationSpecial reamers. Figure N 1 Reamer with descending cutting edges in carbide (Cerin)
Special reamers There is a wide category of special reamers, ie non-standard, that are suitable to address particular problems encountered in the finishing holes, both for maintenance of individual pieces
More informationWe Got You Covered! From Prototype to Production. Haas Factory Outlet. Copyright 2011 by Dorian Tool, East Bernard, Texas. All rights reserved.
Haas Factory Outlet 2011 From Prototype to Production We Got You Covered! Made In U.S.A. Copyright 2011 by Dorian Tool, East Bernard, Texas. All rights reserved. Victory Automatic Thru Coolant Tool Post
More informationOperating instruction for the quick-change adapters type:
type: EM 00 - U EM 01 - U EM 03 - U EM 04 - U EM 05 - U EM 01 U / IKZ EM 03 U / IKZ EM 04 U / IKZ EM 05 U / IKZ Date of edition: 01.02.2008 Stage of alteration: 2 Please keep this for future use! Contents:
More informationISOTURN INSERTS ISCAR. SPMR Square Inserts with a Positive Chipformer Exerting Low Cutting Forces for Semi-Finishing and Finishing Applications
IOTURN INERT PMR quae Insets wit a Positive Cipome Exeting Low Cutting Foces o emi-finising an Finising Appications 90 45 45 45 Toug 1 Ha Recommene Macining Data (mm) (mm/ev) PMR 090304 9.52 3.18 0.40
More informationB-Too Drilling and Tapping Machine Instruction and Maintenance Manual
B-Too Drilling and Tapping Machine Instruction and Maintenance Manual Thank you for your purchase of the B-Too Drilling and Tapping Machine. Please read and understand this short operation manual. Our
More informationDoler Self Colleting Machines*
* P2 Drill with Variable Spacing Foot Light and compact - yet rigid and rugged Modular design - for easy setup and servicing Variety of spindle speeds and terminations to satisfy a wide range of applications
More informationDriving the future of metal cutting.
Turning, drilling, threading, milling _PRODUCT HIGHLIGHTS Driving the future of metal cutting. Product highlights Edition 2018-1 Walter highlight flyer Table of contents A Turning 2 Page ISO turning 4
More informationInitial Tooling Package. VDI 40 - DIN 5480 Star Turret x=100 METAL MACHINING.
Initial Tooling Package VDI 40 - DIN 5480 Star Turret x=100 METAL MACHINING INITIAL TOOLING PACKAGE OVERVIEW VDI 40 - DIN 5480 / STAR TURRET X=100 Package content Product group Type Item number Details
More informationSE 320 SE 520. CNC center lathes
CNC center lathes These machines combine advantages of universal lathes and CNC lathes. The machine works as an universal lathe, in manual mode, being controlled by the hand wheels. If required, the operation
More informationThe best suggestion for precision machining of "hard to machine"materials.
PCBN&PCD INSERTS The best suggestion for precision machining of "hard to machine"materials. YCB011 PCBN grade for high speed, precision machining of cast iron. YCB012 PCBN grade for high speed precision
More informationCompatibility overview of accessories for lathe
Compatibility overview of accessories for lathe Accessory parts for turning Face clamping disc Ø 170 mm 3440295 Face clamping disc Ø 240 mm 3441352 Face clamping disc Ø 250 mm 3440552 Face clamping disc
More informationVarious other types of drilling machines are available for specialized jobs. These may be portable, bench type, multiple spindle, gang, multiple
Drilling The process of making holes is known as drilling and generally drilling machines are used to produce the holes. Drilling is an extensively used process by which blind or though holes are originated
More informationTOMORROW S TOOLING TODAY SECO NEWS SUMMARY
TOMORROW S TOOLING TODAY SECO NEWS SUMMARY 2018.1 TOOLS FOR LIMITLESS PRODUCTIVITY AND PROFITABILITY JETSTREAM TOOLING WELCOME TO SECO NEWS SUMMARY 2018.1 Discover how the latest Seco innovations, many
More informationQuick Change Carbide & Steel Boring Bar Instructions Manual
Workpiece Rigidity 1 Work holding Use the proper chuck and jaws to hold the work-piece, to assure that the part is held with maximum rigidity and stability under cutting force. 2 Steady Rest Support When
More informationWorld leader in live tools, angle heads, and multi-spindle drill heads
World leader in live tools, angle heads, and multi-spindle drill heads heimatec GmbH headquarters-germany The Way to Success Heimatec is an international manufacturing company headquartered in Renchen,
More informationAHX ECONOMICAL, HEPTAGONAL DOUBLE SIDED INSERTS WITH 14 CUTTING EDGES MULTI CORNER INSERT FACE MILLING CUTTERS
AHX ECONOMICAL, HEPTAGONAL DOUBLE SIDED INSERTS WITH 14 CUTTING EDGES MULTI CORNER INSERT FACE MILLING CUTTERS AHX MULTI CORNER INSERT FACE MILLING CUTTERS AHX440S IDEAL FOR ROUGHING AT HIGH FEEDS ON LOWER
More informationTechnical article. Parting & Grooving: How to achieve greater performance, quality and tool life in the 21st century. May, 2015
Technical article May, 2015 Parting & Grooving: How to achieve greater performance, quality and tool life in the 21st century Production engineers faced with overcoming the challenges of parting and grooving
More informationMILLING Milling cutters with replaceable inserts
_FRAESEN _DE_EN_V.indd.. : 9 FACE MILLING CUTTERS WITH PCD MILLING CARTRIDGES Introduction to the technology EcoMill and PowerMill EcoMillBlue and RapidMillBlue FlyCutter 4 Reconditioning face milling
More information