Tools for Turning Mill

Transcription

1 1~12 2~12 HSK-T (ICTM Standard) Tooling 2 Parts Compatibility of Lever Lock Toolholders R42 1

2 Turning mill is the machine tool which combines turning and milling functions. ow the interface (joint part of toolpost and toolholder: equivalent to the arbor for milling) for the turning mill meeting ICTM standard is available. ICTM standard is the standard developed by 16 companies in Japan as the interface of turning mill machine based on the two-face restraint type standard ISO :2001 HSK Standard Shank. This standard became an International Standard as ISO Standard ISO : 2008 in Description is shown as HSK-T. Features 1 Compatible with HSK-A type for Machining Center. Interface HSK Toolpost Spindle Toolholder for Turning (HSK-T type: ICTM standard) (Compatible) HSK Spindle Turning Mill Machining Center Toolholder for Milling (HSK-A type) 2 Machining precision at turning has improved by minimizing the gap between the drive key slot at toolholder side and the drive key at toolpost side. Table 1: Comparison of the gap of a key and key slot Table 2: Effect of the gap Key tolerance HSK-A63 Tolerance Min. gap 0.15 Max. gap Keyslottolerance Gap HSK-T63 Tolerance Min. gap Drive key slot (Toolholder side) Drive key slot (Toolpost side) Max. gap

3 [HSK-T Standard] Toolholder Variation Conventional Type For Square Shank For Boring Bar For Drill 1) For square shank, boring bar, and drill at conventional C lathe machining. 2) Long type for boring bar and short type for drill are available. Solid type Toolholder Handed Type eutral Type(Two types of allover length) 1) Solid type toolholder combining interface focusing on rigidity improvement. 2) eutral type is available as double handed tool (right / left) by moving B-spindle of the spindle head. 3) Two different lengths available for eutral type to prevent the spindle head from interfering with workpiece by selecting the suitable tool length depending on the spindle diameter. Blank Type 1) Blank type for special order is available. 2) Interface part is already processed based on HSK-T Standard. * About Milling Tool For milling tool, use conventional HSK-A type shank. It is compatible with HSK-T standard. 3

4 Identification System (For External) Interface Size T63:HSK-T63 T100:HSK-T100 Manual Clump Hole H o code Yes o Shank Size Square (Height / Width) Hand of Tool R Right L Left Toolholder Length Length from Gauge Line T63 A63 (Previous Description) H S2525 R 105 P C L R (Toolholder for Square Shank) DX (Solid Type) 12 Clamp System P : Lever Lock M : Double Clamp W: Wedge Lock S : Screw Clamp Insert Shape C : 80 Rhombic D : 55 Rhombic T : 60 Triangle V : 35 Rhombic W: 80 Trigon Cutting Edge Angle E G J 95 L V M Insert Relief Angle : 0 B : 5 Hand of Tool R Right L Left eutral Toolholder Length (Length from Gauge Line) DX H L : 65 : 100 : 140 Insert Size C T L L L D V L Coolant Pipe Coolant pipe is built into toolholder. Coolant Pipe Toolholder for Square Shank (For External / Facing) Coolant Outlet Coolant Outlet Fig.1 Fig.2 Description (Previous Description) ød1 ød L L2 F1 F2 Drawing Clamp Screw Wrench Coolant Pipe T63H- S2525R-105 A63-WH- S2525R Fig.1 HS12X25 S2525L-105 S2525L-105 LW-6 T100H- S2525R Fig.2 HS12X30 C00-1 S2525L-150 Coolant outlet direction is adjustable. For 25mm square shank. 4

5 Toolholder for Square Shank Toolholder for Square Shank (For External / Facing) Description Attachment holder Shank ød1 ød H B T L L2 F1 Clamp Screw Wrench Coolant Pipe T63H- S2020R-105T (20mm square) HS12X30 LW-6 T100H- S2525R-150T (25mm square) HS12X35 C00-1 Coolant outlet direction is adjustable. Toolholder for Square Shank (For External / Facing) ød1 ød L2 Clamp Screw Wrench Coolant Pipe T63H- S F S F 120 T100H- S F S F 150 Coolant outlet direction is adjustable. For 25mm square shank. 81 HS12X30 LW-6 96 C00-1 5

6 PCL (External / Facing) 31 6 F CGA CGG CMA CMG CMM CMP F1 Lever Lock Screw Shim Shim Pin Punch Wrench Coolant Pipe T63H- PCLR-DX12 A63-WH- PCLR-DX LL-2 PCLL-DX12 PCLL-DX12 (LL-2) ew descriptions of spare parts (LL-2, LS-2, LC-42) can be used for previous description toolholders. LS-2 (LS-2) LC-42 (LC-42) LSP-2 PC-2 LW-3 PCM (External / Facing) CGA CGG CMA CMG CMM CMP T63H- PCM-H12 A63-WH- PCM-H LL-2 PCM-2 PCM (LL-2) ew descriptions of spare parts (LL-2, LS-2, LC-42) can be used for previous description toolholders. Lever Lock Screw Shim Shim Pin Punch Wrench Coolant Pipe LS-2 (LS-2) LC-42 (LC-42) LSP-2 PC-2 LW-3 PDJ (External / Copying) DGA DGG DMA DMG DMM DMP F1 Lever Lock Screw Shim Shim Pin Punch Wrench Coolant Pipe T63H- PDJR-DX15 A63-WH- PDJR-DX15 LL-3 PDJL-DX15 PDJL-DX (LL-3) ew descriptions of spare parts (LL-3, LS-2) can be used for previous description toolholders. LS-2 (LS-2) LD-42 LSP-2 PC-2 LW-3 6

7 Solid type toolholder PD (External / Copying) DGA DGG DMA DMG DMM DMP Lever Lock Screw Shim Shim Pin Punch Wrench Coolant Pipe T63H- PD-H15 A63-WH- PD-H LL-3 PD-5 PD (LL-3) ew descriptions of spare parts (LL-3, LS-2) can be used for previous description toolholders. LS-2 (LS-2) LD-42 LSP-2 PC-2 LW-3 PTG (External) TGA TGG TMA TMG TMM TMP F1 Lever Lock Screw Shim Shim Pin Punch Wrench Coolant Pipe T63H- PTGR-DX16 A63-WH- PTGR-DX LL-1 PTGL-DX16 PTGL-DX16 (LL-1) ew descriptions of spare parts (LL-3, LS-2) can be used for previous description toolholders. LS-1 (LS-1) LT-32 (LT-32) LSP-1 PC-1 FH-2.5 WTE (External) TGA TGG TMA TMG TMM TMP Clamp Set Shim Shim Pin Shim ut Wrench Spacer Coolant Pipe T63H- WTE-H16 A63-WH- WTE-H WTE-6 WTE WCS-1 WT-33 WP-1S W-1 LW-3 WSP-1 7

8 PWL (External / Facing) WGA WMA WMG WMM WMP F1 Lever Lock Screw Shim Shim Pin Punch Wrench Coolant Pipe T63H- PWLR-DX08 A63-WH- PWLR-DX LL-2 PWLL-DX08 PWLL-DX08 (LL-2) LS-2 (LS-2) LW-42 (LW42) LSP-2 PC-2 LW-3 ew descriptions of spare parts (LL-2, LS-2, LW-42) can be used for previous description toolholders. WWM (External / Facing) WGA WMA WMG WMM WMP Clamp Set Shim Shim Pin Shim ut Wrench Coolant Pipe T63H- WWM-H08 A63-WH- WWM-H WWM-L08 WWM-L WCS-8 WW-42 WP5X15 W-1 LW-3 8

9 Solid type toolholder SVLB (External / Copying) VBGT VBMT VBGW VBMW VCGT VCMT VCGW Description F1 Clamp Screw Wrench Shim Shim Screw Wrench (for Shim Screw) Coolant Pipe T63H- SVLBR-DX16 SVLBL-DX SB-40125TR FT-15 SV-32 SS-4 LW-4 SVVB (External / Copying) VBGT VBMT VBGW VBMW VCGT VCMT VCGW Description *B ( ) Clamp Screw Wrench Shim Shim Screw Wrench (for Shim Screw) Coolant Pipe T63H- SVVB-H SB-40125TR FT-15 SV-32 SS-4 LW-4 SVVB

10 For Threading (Solid Type) KGBA (External Grooving) R-hand Insert for R-hand Toolholder, L-hand Insert for L-hand Toolholder. Description (Previous Description) F1 T Clamp Set Wrench Coolant Pipe Applicable Insert G10~G12 T63H- KGBAR-16 A63-WH- KGBAR LGBA-16RS KGBAR KGBAR KGBAR KGBAR LGBA-22RS KGBAR KGBAR T63H- KGBAL-16 A63-WH- KGBAL LGBA-16LS KGBAL KGBAL KGBAL KGBAL LGBA-22LS KGBAL KGBAL * For details of applicable inserts, please refer to the General Catalog. T shows the distance from the Toolholder to the cutting edge. FT-15 FT-15 GBA32R type GBA43R type GBA32L type GBA43L type KT (Threading) Description (Previous Description) F1 R-hand Insert for R-hand Toolholder, L-hand Insert for L-hand Toolholder. Clamp Set Wrench Shim Shim Screw Coolant Pipe Applicable Insert J6,J8,J10, J12,J14 T-32 T63H- KTR-16 A63-WH- KTR-16 CPS-5S FT-15 SP3X8 16ER type (TW-32)* KTR-22 KTR-22 CPS-6S LW-3 T-43 SP3X8 22ER type * Shim: Please separately purchase TW-32 when using 2-thread type threading insert. (e.g. 16ER ISO-M02) * For details of applicable inserts, please refer to the General Catalog. 10

11 Toolholder for Boring Bar / Drill Identification System (For Boring Bar / Drill / Blank Tool) T63 H T63:HSK-T63 T100:HSK-T100 Manual Clump Hole H o code Yes o C BL Toolholder For Boring Bar For Drill For Blank Tool Internal Dia. 08 ø8 10 ø10 Size Toolholder Length Interface Length from Gauge Line Coolant Pipe Coolant pipe is built into toolholder. Coolant Pipe Toolholder for Boring Bar / Drill M 26T63H 29T100H d (8) 8.4 D d d1 L3 L2Attachment depth L4 Description L2 (45) T63H and T100H have a 8.4 internal coolant hole. When installing a boring bar, consider protruding length of the boring bar. (Previous Description) ød ød1 ød L2 L3 L4 M Clamp Screw Wrench Coolant Pipe T63H A63-WH HS8X M8 LW-4 HS8X M10 HS10X LW HS12X16 M HS12X12 LW-6 T63H- C20-75 A63-WH- C M10 HS10X16 LW-5 C25-85 C HS12X16 63 M12 C32-90 C HS12X12 LW-6 C C M16 HS16X12 LW-8 T100H HS8X M8 LW-4 HS8X M10 HS10X LW HS12X18 M HS12X20 LW-6 T100H- C M10 HS10X16 LW-5 C M16 HS16X18 C LW-8 C M16 HS16X20 LW-8 * Shorter than the toolholder for boring bar. C00-1 C00-1 Remarks Boring Bar Installation * For Drill Installation Boring Bar Installation * For Drill Installation 11

12 For Blank Tool Blank Tool Plug M5 Plug M5 Fig.1 Fig.2 ød *L2 Drawing Coolant Pipe T63H- BL A63-WH- BL U Fig.1 BL BL U B00-67 B00-67 U Fig.2 * L2 indicates the length from gauge line to plug. Blank tool is for special order of toolholder. 1 Interface part is based on HSK-T standard. 2 Tool tip is also heat-treated. Do not re-heat again to avoid deformation of interface. Material: SCM439 Hardness: 40~45HRC! CAUTIO It may be necessary to empty the adjacent pot inside the ATC magazine of the machine depending on the tool size. (Large tool registration setup) For details, please refer to the instruction of Machine builder. 12 : Deleted from the next catalogue