N/C LATHE TOOLING F F

Transcription

1 ATHE TOOING

2 ATHE TOOING Collet Chuck System MEGA MICRO CHUCK PAT. Clamping diameter: ø0. - ø6.05 Smaller nut diameter than the body enables installation from the back of the toolholders in small lathes with limited space ø14 S6 - MEGA 6 S - dimension MICRO CHUCK Maximum clamping diameter MEGA CHUCK System S6-MEGA6S- 16 S-MEGA6S S5.875-MEGA6S Nut is included. Collet and wrench must be ordered separately. 2. coolant supply is available. Standard Accessory MEGA NUT Mega Wrench Micro Collet Micro Seal Nut Collet Case α Taper Cleaner or Spares G3 G22 G2 G3 G3 G3 ATHE TOOING Collet Chuck System NEW BABY CHUCK PAT. Clamping diameter: ø2.5 - ø ATHE TOOING lange acts as a stopper and reduces time for preset off the machine significantly. Designed to be directly mounted into the drill holder on the turret. [With Stopper] SS25 - NBS 13 - dimension Maximum clamping diameter NEW BABY CHUCK System 1 2 SS25-NBS SS32-NBS NBS SS-NBS NBS Nut is included. Screw, collet and wrench must be ordered separately. 2. coolant supply is available. 2 1 Screw (Optional) Tool adjustment amount H Tool adjustment amount H indicates the adjustment length with an Screw. Standard Accessory New Baby Nut New Baby Wrench Collet BABY PERECT SEA Screw Tap Screw or Spares G26 G26 G4 G24 G10 G26 1

3 Collet Chuck System Clamping diameter: ø ø NEW BABY CHUCK PAT. ATHE TOOING Ideal as a basic holder for drills, taps, small-diameter cylindrical turning tools and reamers on lathes! [Standard] S6 - NBS 6 - dimension Maximum clamping diameter NEW BABY CHUCK System 2 ig. 1 ig Tool adjustment amount H S6 -NBS NBS NBS S -NBS NBS NBS NBS S22 -NBS NBS NBS NBS S25 -NBS NBS NBS NBS NBS S25.4-NBS NBS NBS NBS NBS S32 -NBS NBS NBS Refer to NEW BABY CHUCK [With Stopper] on the left page for remarks Screw (Optional) 1 2 ig. 2 3 Screw (Optional) 1 ATHE TOOING 2

4 ATHE TOOING Collet Chuck System MEGA ER GRIP Clamping diameter: ø ø Popular 8 (single angle) taper ER collet. Achieves stable machining with highly accurate chucking repeatability. lat is provided on the shank to be mounted in the tool post of the NC lathe directly. [With Stopper] SS25 - MEGA ER - / N Screw (Optional) Nut less dimension MEGA ER GRIP 2 1 ATHE TOOING 1 2 H Screw SS25-MEGA ER-/N NBA13B -75/N 75 SS32-MEGA ER-/N NBA13B -75/N MEGA ER32-/N NBAB -75/N SS-MEGA ER-/N NBA13B -75/N MEGA ER32-/N NBAB -75/N Collet, nut, Screw and wrench must be ordered separately. 2. coolant supply is available. 3. Tool adjustment amount H indicates the adjustment length with an Screw. MEGA ER NUT MEGA ER SOID NUT ER PERECT SEA Mega Wrench ER NUT New Baby Wrench Screw G17 G22 or Mega ER Collets, G15 Collet and nut must be ordered separately. Example MEGA ER PERECT SEA MERPS-0035 MEGA ER NUT MERN MEGA ER SOID NUT MERSN ER NUT ERN MEGA ER Collet ERC-3AA MEGA ER GRIP SS25-MEGA ER-/N 3

5 Collet Chuck System Clamping diameter: ø1.9 - ø16 MEGA ER GRIP ATHE TOOING [Standard] S6 - MEGA ER 11 - / N Screw (Optional) MEGA ER GRIP Nut less dimension H S6-MEGA ER11- /N /N S-MEGA ER11- /N /N -MEGA ER16- /N /N S25-MEGA ER11- /N /N 100 -MEGA ER16- /N /N MEGA ER- /N /N 100 -MEGA ER25- /N /N 100 S9.05-MEGA ER11- /N /N MEGA ER16- /N /N 1. Collet, nut, Screw and wrench must be ordered separately. 2. coolant supply is available. 3. Tool adjustment amount H indicates the adjustment length with an Screw. Screw NBA 6B NBA 6B NBA10B NBA 6B NBA10B NBA13B NBA16B NBA 6B NBA10B ATHE TOOING MEGA ER NUT MEGA ER SOID NUT ER PERECT SEA Mega Wrench ER NUT New Baby Wrench Screw G17 G22 or Mega ER Collets, G15 4

6 ATHE TOOING TAPPER MEGA SYNCHRO TAPPING HODER PAT. M1 - M3 Improves thread quality and tap life by reducing thrust loads caused by synchronization errors up to 90%. [Small Diameter Tap MTG3] Cannot be used with machining center without synchronized tapping function. 90 Micro Collet NBC4S-d 22 Micro Collet NBC4S-d ø12 ø25 ø SS25 - MGT ø12 12 Clamping length Tip length MEGA SYNCHRO TAPPING HODER SS25-MGT3-22 ST-MGT Nut is included. (MGN4S) Collet and wrench must be ordered separately. 2. When attaching or detaching the tap, use the Mega Wrench and a commercially available flat wrench (12mm). 1. Nut is included. (MGN4S) Collet and wrench must be ordered separately. 2. There is no flat on the shank part. 3. When attaching or detaching the tap, use the Mega Wrench and a commercially available flat wrench (12mm). Mega Wrench Micro Collet ATHE TOOING MGR12 Tapping range Tap shank diameter Metric Unify 1. When attaching or detaching the tap, a commercially available NBC4S - 3.0AA M1 - M2.6 No flat wrench (12mm width) is also NBC4S - 4.0AA M3 No.5, 6 4 required. Prepare this on your own. ATHE TOOING TAPPER SYNCHRONIZED TAP HODER R 22.5 ø7.4 Collet accuracy Collet class Runout accuracy Nose 4D AA Within 1μ m Within 3μ m Nose Tip 4d M3 - M Built-in radial float mechanism absorbs misalignment with the spindle center. Excellent for rigid tapping with NC athes. Small axial float absorbs synchronization errors occurring when changing over the rotation from forward to reverse, reducing loads to the tap. 2 1 TENSION 2 1 COMP Tap Collet TC Type (Optional) Radial float = ±0.5mm/ø SS32 - ATS 12 R - dimension Radial float mechanism Tapping range MEGA SYNCHRO TAPPING HODER TYPE R Tapping range Compatible Tap Collet SS32-ATS12R M3 - M12 TC12-d SS-ATS12R ATSR- 70 M8 - M TC-d 1. Tap Collet is not included. 1: Compression amount TC Tap Collet must be ordered separately. 2: Tension amount Cannot be used with machining center without synchronized tapping function. or Tap Collets, A135 5

7 TAPPER AUTO TAPPER SERIES ATHE TOOING AUTO TAPPER B M3 - M Auto depth control eliminates variation in the tapping depth, ideal for blind-hole or pipe tapping. Minimized projection length avoids interference on turret lathes. Automatic depth control SS25 - ATB 8-2 dimension Tapping range AUTO TAPPER B TENSION 2 1 COMP 1 Tap Collet TC Type (Optional) Tapping range Compatible Tap Collet SS25-ATB 8- M3 - M TC 8-d SS32-ATB M3 - M TC12-d SS-ATB ATB- 70 M8 - M TC-d 1. Tap Collet is not included. TC Tap Collet must be ordered separately. 2. Cannot be used in left-hand thread machining dimension in the table is the tension amount until it reaches neutral. 1: Compression amount 2: Tension amount or Tap Collets, A135 AUTO TAPPER E M3 - M24 Easy-to-use built-in torque limiter. Extended axial float allows stable and reliable use. Torque limiter ATHE TOOING SS32 - ATE dimension Tapping range AUTO TAPPER E TENSION 2 1 Tap Collet TCE Type (Optional) 1 COMP Tapping range Compatible Tap Collet SS32-ATE M 3 - M12 TCE12-d SS-ATE ATE M10 - M TCE24-d 1. Tap Collet is not included. TCE Tap Collet must be ordered separately. 2. Cannot be used in left-hand thread machining. 1: Compression amount 2: Tension amount or Tap Collets, A138 6

8 ATHE TOOING Center Adjustable Holder for athe CENTERING HODER Clamping diameter: ø0.5 - ø Easy and reliable centering adjustment for turret lathe sleeve holder. Polar coordinate system realizing intuitive adjustment The rotation center of the workpiece and the center of the turret pot may be misaligned not only in the center height direction, but also in the X-axis direction. In order to easily correct the deviation of both directions at the same time, a polar coordinate system combining rotary and linear movement is used. Single 2-way adjusting bolt completes adjustment of center height both up and down. Adjustment amount ±0.5mm Rotation range ± SS32-NBS 8CH SS-NBSCH Nut is included. Collet and wrench must be ordered separately. 3. Screw cannot be used. 2. coolant supply is available. Weight (kg) Standard Accessory Nut Wrench Collet BABY PERECT SEA or Spares G26 G26 G4 G24 ATHE TOOING ATHE TOOING Tool Offset Sensor ATHE MASTER Setup of tool offset is possible without trial cut. Effective in reducing setup time for NC athes. Detectable with various tool bits for external, internal and face turning. ED External Internal ace Clamp the section of the ATHE MASTER with chuck jaws. ED illuminates when the tip of the tool touches the sensor plate. Collar Set <Optional> ø ø ø50 If the chuck jaw diameter does not fit, an optional collar set is available. ± Sensor plate 2 Repeatability Battery M ±2μ BR425 M- 65 SR44 x 2 Caution Machine and tools must be electro-conductive for measurement. h7 ±0.02 H7 Inner diameter Outer diameter M15CS 15, 25, (1 pc each) MCS 35,,, 50 (1 pc each) 7