NORTH AMERICA ONLY PIPE SLUG CHUTE DETAILS ALL DIMENSIONS IN INCHES

Size: px

Start display at page:

Download "NORTH AMERICA ONLY PIPE SLUG CHUTE DETAILS ALL DIMENSIONS IN INCHES"

Neal Ethelbert Lee
5 years ago
Views:

1 "B" B. C. PIPE SLUG CHUTE DETAILS ALL DIMENSIONS IN INCHES PVC - DWV PIPE FITTINGS FOR "X" SOC. HD. SCREW (N) HOLES "D" "C" "A" O.D. ALTER IF CONSTRAINED BY SPACE LIMITATION. (2) MIN. FASTENING HOLES REQUIRED. PART NUMBER WDX WDX WDX WDX SOCKET FLANGE SCHEDULE 0 PIPE SIZE "A" "B" "C" "D" 1-1/2" " " ' "N" "X" M M16 M16 M16 FOR APPLICATION SEE W-DX5-54M PAGS 20 AND 21 O.D. "L" I.D. PVC-DWV PIPE OR EQUIVALENT. PART NUMBER WDX WDX WDX WDX PIPE SIZE 1-1/2" 2" 3" 4' AVERAGE O.D AVERAGE I.D MIN. WALL THK

2 PUNCH STRIPPER OPTIONAL STRIPPER FORCE PUNCH STRIPPER CAN BE USED TO STRIP MATERIAL UP TO 2mm THICKNESS. STRIPPER CAN BE MOUNTED UP TO 15 DEGREES ANGLE FROM MECHANICAL CAM. PUNCH STRIPPER IS ENGINEERED TO WITHSTAND AND ELIMINATE ANY SIDE LOAD THRUST TO THE PUNCH FOR PROLONGED PUNCH LIFE. STRIPPER FOR APPLICATION SEE W-DX5-50M PAGE 20 DIE SPRING STANDARD HEAVY LOAD (RED) PUNCH LENGTH ØA PUNCH SHANK ORDERING EXAMPLE WDX R SS - E PURCHASE FROM: MOELLER PHONE (734) PUNCH STRIPPER SEE PAGES 3 AND 4 SPRING TYPE RED HEAVY LOAD STRIPPER LENGTH (K) CODE (SS-STEEL SHORT OR SL- STEEL LONG) SEE PAGES 3 AND 4 PUNCH POINT SIZE P = W = R = 0. E = RECTANGULAR PUNCH SEE WDX5-52M PAGE 6 FOR PUNCH CODES IF PANEL CONTOUR IS REQUIRED ON PUNCH STRIPPER OR PUNCH POINT HAS A SPECIAL SHAPE AND CAN NOT BE DESCRIBED, IN THE ORDERING NUMBER, (SEE W-DX5-52M PAGE ) THEN USED THE CODE (SM) SOLID MODEL DATA PROVIDED. NOTE: WHEN SPECIAL RETAINER (SM) IS REQUIRED, IT IS THE DESIGN SOURCE RESPONSIBILITY TO SPECIFY ALTER IN THE REMARKS COLUMN OF THE ESP REPORT. ORDERING EXAMPLE WDX R SS - SM SOLID MODEL DATA PROVIDED 2

3 PUNCH STRIPPER SETS INCLUDE: (1) HOUSING (1) STEEL STRIPPER (1) DIE SPRING (RED HEAVY LOAD LOAD) (1) SPRING CAP AND M SCREW PUNCH STRIPPER FOR 0 mm LONG PUNCHES E/2 D C E ØB Ø9 G STRIPPER EACH PART MUST BE PERMANENTLY MARKED WITH THE FULL ORDERING NUMBER AND MANUFACTURER'S BRAND. SEE PAGE 2 FOR ORDERING EXAMPLE ØA STRIPPER SHORT = S K MAX. TRAVEL FROM K DIM STRIPPER LONG = L K MAX. TRAVEL FROM K DIM ØA PUNCH SHANK DIE SPRING STANDARD MEDIUM LOAD (BLUE) K STRIPPING FORCE (N) OF DEFLECTION ØA FORD PART ØB C D E NUMBER WDX R- WDX R- WDX R- 20 WDX R- 25 WDX R- 32 WDX R- 40 WDX R , G ± MAX. DEF. DEF @ @ @ @ @ @ @7.6 3

4 PUNCH STRIPPER SETS INCLUDE: (1) HOUSING (1) STEEL STRIPPER (1) DIE SPRING (RED HEAVY LOAD) (1) SPRING CAP AND M SCREW PUNCH STRIPPER FOR 0 mm LONG PUNCHES E/2 D C E ØB Ø9 G STRIPPER EACH PART MUST BE PERMANENTLY MARKED WITH THE FULL ORDERING NUMBER AND MANUFACTURER'S BRAND. SEE PAGE 2 FOR ORDERING EXAMPLE ØA STRIPPER SHORT = S K MAX. TRAVEL FROM K DIM. STRIPPER LONG = L K MAX. TRAVEL FROM K DIM K ØA PUNCH SHANK DIE SPRING STANDARD MEDIUM LOAD (BLUE) STRIPPING FORCE (N) OF DEFLECTION ØA FORD PART NUMBER ØB WDX R- WDX R- WDX R- WDX R- WDX R- WDX R WDX R C D E G ± MAX. DEF. DEF @ @ @ @.1 546@ @ @7.6 4

6 < PREVIOUS PAGE HALF-MOON LOCATOR PIN PRINTED COPY IS UNCONTROLLED NEXT PAGE > O/ mm FLAT 16mm FLAT WDX RF-L0 20 R 2 TYP. REVERSE FLAT L O/ FORD PART NUMBER WDX FOR APPLICATION SEE WDX4-50M PAGE 17. MATERIAL: HIGH SPEED TOOL STEEL AISI-M2 HARDNESS RANGE: POINT AND SHANK, RC TRIPLE TEMPER. EACH PART MUST BE PERMANENTLY MARKED WITH THE FORD ORDERING NUMBER AND MANUFACTURER S BRAND. ORDERING EXAMPLE: WDX L0 SPECIFY "L" LENGTH WHEN ORDERING SEPT

7 PRINTED COPY IS UNCONTROLLED < PREVIOUS PAGE HALF-MOON LOCATOR BUTTON PRESS FIT, DOWEL SLOT LOCKING DEVICE NEXT PAGE > R 16.0 * R 16 + METAL THICKNESS R 0.4 TYP. 45 o 45 o O/6 PULL DOWEL,20mm IN LENGTH WITH M4 THREADED HOLE. 0.5 X 45 o CHAMFER O/ L o 3 MAX. X PRESS IN LEAD MATERIAL SPECIFICATION: AISI A-2 HEAT TREAT "NA". HARDNESS RANGE: RC FOR APPLICATION SEE WDX4-50M PAGE 17. FORD PART NUMBER WDX WDX WDX L ORDERING EXAMPLE: * WDX R16. EACH PART MUST BE PERMANENTLY MARKED WITH THE FULL ORDERING NUMBER AND MANUFACTURER S BRAND. APRIL 1999

8 LOCATING TABS FOR MAJOR PANELS DUE TO THE RECESS CREATED IN HEM FLANGE,KEEP LOCATING TABS AWAY FROM HOOD HINGE AREA.THIS IS DONE SO AS NOT TO INFRINGE ON THE HEM FLANGE WELDING AREA AND TO PREVENT FLEXING OF THE PANEL (3) PLACES (2) PLACES 6mm DOWEL R 4.94 (3) PLACES BLEND R TYP. TRIM LINE SEE W-DX5-56M PAGES 66 AND 67. R 5.00 TYP. 2 A 16 Ø32 1 TYP. OPTIONAL LOCATION LOCATING TAB STANDARD LOCATION 60 DIE BUTTON FORD NUMBER WDX WDX A 14 EACH PART MUST BE PERMANENTLY MARKED WITH THE FULL ORDERING NUMBER AND MANUFACTURER'S BRAND. Ø32 BALL SEAT MUST CONFORM TO AISI STANDARD GAGES FOR LOCKING LOCATION MAX. FOR PILOT GAGE SEE W-DX16-60M PAGE 15 PANEL FLOW MAX. HINGE AREA HOOD INNER PUNCH WDX STD. BALL LOCATION WDX OPP. BALL LOCATION 25 MIN. LOCATING TABS 9

9 LANCING PUNCH R 1.6 (2) PLACES HEAVY DUTY SHANK 0.5 MAX. 2 SHEAR CENT. Ø MAX. ON (3) SIDES R CENT. FORD PART NUMBER WDX MATERIAL: AISI-M2 Rc DOUBLE TEMPER FOR APPLICATION SEE WDX5-50M PAGE 20 - EACH PART MUST BE PERMANENTLY MARKED WITH THE FULL ORDERING NUMBER AND MANUFACTURER'S BRAND.

10 METRIC-DIE BUTTONS PRESS FIT, DOWEL SLOT LOCKING DEVICE ROUND HOLE -A- "F" Ø0.01 A P D Ø6 PULL DOWEL, 20mm IN LENGTH WITH M4 THREADED HOLE. B 0.5 X STRAIGHT RELIEF FOR Ø13 THRU Ø50 TAPERED RELIEF FOR Ø63 AND LARGER ØR 3 MAX. X PRESS IN LEAD FOR ADDITIONAL INFORMATION ON CONTOURED SURFACES, ON LAND DIE BUTTON CALL OUT SEE WDX5-54M PAGE 3. BUTTON BORE DIMENSIONS: ØD X L +0.0 DEEP -0.3 MATERIAL SPECIFICATION: AISI A-2 HEAT TREAT "NA". HARDNESS RANGE: ROCKWELL C NOTE: MUST BE WITHIN ANSI STANDARDS (AMERICAN NATIONAL STANDARD INSTITUTE). - EACH BUTTON MUST BE PERMANENTLY MARKED WITH THE FULL ORDERING NUMBER AND MANUFACTURER'S BRAND.

11 METRIC-DIE BUTTONS PRESS FIT, DOWEL SLOT LOCKING DEVICE ROUND HOLE FORD BODY STD. NUMBER ORDER BODY CODE DIA. D FBR 2 13 FBR 4 20 FBR 5 25 FBR 6 32 FBR 7 40 FBR FBR FBR A 76 FBR B 5 FBR C 90 FBR D 0 RANGE OF HOLE SIZE P FROM THRU 5.5 FROM 5.6 THRU.5 FROM.6 THRU 15.5 FROM 15.6 THRU 19.0 FROM 19.1 THRU 26.0 FROM 26.1 THRU 36.5 FROM 2.0 THRU 50.0 FROM 39.0 THRU 60.0 FROM 43.0 THRU 66.0 FROM 45.0 THRU 70.0 FROM 50.0 THRU 7.0 RELIEF "B" LAND LENGTH FOR DOWEL CONTOURED SURFACES HOLE SLOT UP TO 5 5 TO 15 STANDARD ALTERNATE R F CODE = S CODE = A *SEE NOTE * NOTE: DIE BUTTONS Ø6ö3 AND LARGER WILL HAVE A CONSTANT TAPER RELIEF (3/4 INCLUDED TAPER RELIEF). NOTE: FOR ORDERING EXAMPLE SEE W-DX5-52M PAGE 7 13

12 METRIC-DIE BUTTONS PRESS FIT, DOWEL SLOT LOCKING DEVICE OBLONG HOLE S S A -A "F" STANDARD DOWEL SLOT IS AT 0 ALTERNATE LOCATION IS AT D P Ø6 PULL DOWEL, 20mm IN LENGTH WITH M4 THREADED HOLE. 0.5 X 45 W B STRAIGHT RELIEF FOR Ø13 THRU Ø50 TAPERED RELIEF FOR Ø63 AND LARGER ØR 3 MAX. X PRESS IN LEAD FOR ADDITIONAL INFORMATION ON CONTOURED SURFACES, ON LAND DIE BUTTON CALL OUT SEE WDX5-54M PAGE 3. BUTTON BORE DIMENSIONS: ØD X L +0.0 DEEP MATERIAL SPECIFICATION: AISI A-2 HEAT TREAT "NA". HARDNESS RANGE: ROCKWELL C NOTE: MUST BE WITHIN ANSI STANDARDS (AMERICAN NATIONAL STANDARD INSTITUTE). - EACH BUTTON MUST BE PERMANENTLY MARKED WITH THE FULL ORDERING NUMBER AND MANUFACTURER'S BRAND. 14

13 METRIC-DIE BUTTONS PRESS FIT, DOWEL SLOT LOCKING DEVICE OBLONG HOLE FORD NUMBER BODY STD. ORDER BODY CODE DIA. D RANGE OF HOLE SIZE P W RELIEF HOLE R -MAX. "B" LAND LENGTH FOR DOWEL CONTOURED SURFACES SLOT UP TO 5 5 TO 15 STANDARD ALTERNATE F CODE = S CODE = A FBO FBO FBO FBO FBO FBO FBO FBO FBO FBO FBO A B C D THRU THRU THRU THRU THRU THRU THRU THRU THRU THRU THRU THRU THRU THRU THRU THRU THRU THRU THRU THRU THRU THRU *SEE NOTE * NOTE: DIE BUTTONS Ø63 AND LARGER WILL HAVE A CONSTANT TAPER RELIEF (3/4 INCLUDED TAPER RELIEF). NOTE: FOR ORDERING EXAMPLE SEE W-DX5-52M PAGE 7 15

14 METRIC-DIE BUTTONS PRESS FIT, DOWEL SLOT LOCKING DEVICE SQUARE HOLE S S A R (TYP.) "F" 1.6 STANDARD DOWEL SLOT IS AT 0 ALTERNATE LOCATION IS AT P D A- 0.5 Ø6 PULL DOWEL, 20mm IN LENGTH WITH M4 THREADED HOLE. B X STRAIGHT RELIEF FOR Ø13 THRU Ø50 TAPERED RELIEF FOR Ø63 AND LARGER ØR 3 MAX. X PRESS IN LEAD FOR STOCK THICKNESS OVER 1.5mm SEE WDX5-54M PAGE 5. FOR ADDITIONAL INFORMATION ON CONTOURED SURFACES, ON LAND DIE BUTTON CALL OUT SEE WDX5-54M PAGE 3. BUTTON BORE DIMENSIONS: ØD X L +0.0 DEEP MATERIAL SPECIFICATION: AISI A-2 HEAT TREAT "NA". HARDNESS RANGE: ROCKWELL C NOTE: MUST BE WITHIN ANSI STANDARDS (AMERICAN NATIONAL STANDARD INSTITUTE). - EACH BUTTON MUST BE PERMANENTLY MARKED WITH THE FULL ORDERING NUMBER AND MANUFACTURER'S BRAND. 16

15 METRIC-DIE BUTTONS PRESS FIT, DOWEL SLOT LOCKING DEVICE SQUARE HOLE FORD NUMBER BODY STD. ORDER BODY CODE DIA. D RANGE OF HOLE SIZE P RELIEF HOLE R -MAX. "B" LAND LENGTH FOR DOWEL CONTOURED SURFACES SLOT UP TO 5 5 TO 15 STANDARD ALTERNATE F CODE = S CODE = A FBS FBS FBS FBS FBS FBS FBS FBS FBS FBS FBS A 76 B 5 C 90 D 0 FROM THRU 3.5 FROM 3.6 THRU 7.5 FROM 7.6 THRU.5 FROM.6 THRU 14.0 FROM 14.1 THRU 1.5 FROM 1.6 THRU 25.5 FROM 17. THRU 35.4 FROM 22.7 THRU 42.5 FROM 27.0 THRU 46.7 FROM 29. THRU 49.5 FROM 35.4 THRU *SEE NOTE * NOTE: DIE BUTTONS Ø63 AND LARGER WILL HAVE A CONSTANT TAPER RELIEF (3/4 INCLUDED TAPER RELIEF). NOTE: FOR ORDERING EXAMPLE SEE W-DX5-52M PAGE 7 17

16 METRIC-DIE BUTTONS PRESS FIT, DOWEL SLOT LOCKING DEVICE RECTANGULAR HOLE -A- R (TYP.) "F" STANDARD DOWEL SLOT IS AT 0 ALTERNATE LOCATION IS AT D P S S A W Ø6 PULL DOWEL, 20mm IN LENGTH WITH M4 THREADED HOLE. B X STRAIGHT RELIEF FOR Ø13 THRU Ø50 TAPERED RELIEF FOR Ø63 AND LARGER ØR 3 MAX. X PRESS IN LEAD * FOR STOCK THICKNESS OVER 1.5mm SEE WDX5-54M PAGE 5. FOR ADDITIONAL INFORMATION ON CONTOURED SURFACES, ON LAND DIE BUTTON CALL OUT SEE WDX5-54M PAGE 3. BUTTON BORE DIMENSIONS: ØD X L +0.0 DEEP MATERIAL SPECIFICATION: AISI A-2 HEAT TREAT "NA". HARDNESS RANGE: ROCKWELL C NOTE: MUST BE WITHIN ANSI STANDARDS (AMERICAN NATIONAL STANDARD INSTITUTE). - EACH BUTTON MUST BE PERMANENTLY MARKED WITH THE FULL ORDERING NUMBER AND MANUFACTURER'S BRAND. 1

17 METRIC-DIE BUTTONS PRESS FIT, DOWEL SLOT LOCKING DEVICE RECTANGULAR HOLE FORD BODY STD. RANGE OF HOLE SIZE NUMBERORDERBODY CODE DIA. FBE FBE 4 5 D P 6.0 THRU THRU 13.0 W 3.0 THRU THRU 6.5 FBE FBE FBE THRU THRU THRU THRU.5.0 THRU THRU 20.5 FBE FBE 9 A THRU THRU THRU THRU 31.6 FBE B THRU THRU 34.9 FBE C THRU THRU 36.0 FBE D THRU THRU 41.5 RELIEF HOLE R -MAX *SEE NOTE "B" LAND LENGTH FOR DOWEL CONTOURED SURFACES SLOT UP TO 5 5 TO 15 STANDARD ALTERNATE F CODE = S CODE = A NOTE: DIE BUTTONS Ø63 AND LARGER WILL HAVE A CONSTANT TAPER RELIEF (3/4 INCLUDED TAPER RELIEF). NOTE: FOR ORDERING EXAMPLE SEE W-DX5-52M PAGE 7 19

19 CLASSIFIED SHAPE FOR BUTTONS WITH DOWEL SLOT LOCKING DEVICE SHAPES ARE CENTERED ON DIE BUTTONS AS SHOWN. -A "F" D STANDARD DOWEL SLOT IS AT 0. ALTERNATE LOCATION IS AT 90. Ø6 PULL DOWEL, 20mm IN LENGTH WITH M4 THREADED HOLE S S A HOLE SHAPE DIM. P,W, & A TOL. TO BE WITHIN FOR STOCK THICKNESS OVER 1.5mm SEE WDX5-54M PAGE 5. B X STRAIGHT RELIEF FOR Ø13 THRU Ø50. FOR Ø63 AND LARGER WILL HAVE A CONSTANT TAPER RELIEF (3/4` INCLUDING TAPER RELIEF). ØR 3 MAX. X PRESS IN LEAD EXAMPLE FOR ORDERING BUTTONS: FBK 5 A S HOLE SIZE P = LAND LENGTH "B". W =. CODE S = 6mm LAND. A = 5.1 DOWEL SLOT LOCATION CODE A = 90 BODY DIAMETER - D. CODE 5 = 25 DIA. FORD DIE BUTTON KEY HOLE ( SEE PAGE 20) ADDITIONAL INFORMATION ON CONTOURED SURFACES, FOR LAND DIE BUTTON CALL OUT SEE WDX5-54M PAGE 3. STANDARD DOWEL SLOT LOCATION CODE "S" IS AT 0 ALTERNATE DOWEL SLOTS LOCATION CODE "A" IS AT 90 MATERIAL SPECIFICATION: AISI A-2 HEAT TREAT "NA". HARDNESS RANGE: ROCKWELL C BUTTON BORE DIMENSIONS: ØD X L DEEP HOLE SIZE - P & W ARE TO AISI STANDARDS CALL-OUT NOTE: MUST BE WITHIN ANSI STANDARDS (AMERICAN NATIONAL STANDARDS INSTITUTE). EACH BUTTON MUST BE PERMANENTLY MARKED WITH THE FULL ORDERING NUMBER AND MANUFACTURER'S BRAND. 21

25 GRAVITY LATCH FOR SECURING SCRAP CHUTE IN STORAGE POSITION ONE GRAVITY LATCH REQUIRED, PER SCRAP CHUTE ASSEMBLY 1 Ø13 70 MAX Ø9.5 FOR M4 SOC. HD. SCR. (4) HOLES GRAVITY LATCH "L" SHAPE FORD PART NUMBER WDX McMASTER-CARR NUMBER 1774A47 MATERIAL STEEL FOR APPLICATION SEE WDX5-5M PAGES 30 AND 31 NOTE: GRAVITY LATCH WILL BE SUPPLIED WITH "L" OR STRAIGHT HOOK. 1.5 X 45 R L 13 MIN. Ø GRAVITY LATCH STRAIGHT FORD PART NUMBER WDX

26 BRACKET FOR GRAVITY LATCH 45 6 "T" BRACKET 50 MIN. L 90 FORD PART NUMBER WDX Ø11 (2) HOLES 25 CENT 32 CENT. 26 CENT. 50 FOR APPLICATION SEE WDX5-5M PAGES 30 AND 31 Ø5 (4) HOLES MATERIAL: AISI-1 OR EQUIVALENT CENT. 45 MIN. A 90 Ø11 (2) HOLES L 50 MIN CENT. 6.5 "L" BRACKET FORD PART NUMBER WDX CENT. Ø5 (4) HOLES EACH PART MUST BE PERMANENTLY MARK WITH THE FULL ORDERING NUMBER AND MANUFACTURER'S BRAND. 2

27 SCRAP GUIDE BAR AND STOP W L A 30 MAX. 9 W Ø ROD FOR M SOC. HD. SCR (2) SLOTS SCRAP GUIDE BAR FORD PART NUMBER WDX ORDERING EXAMPLE USED TO SUPPORT SCREW HOLE SOLID MODELING REQUIREMENTS. MATERIAL AISI-1 OR 20 EACH PART MUST BE PERMANENTLY MARKED WITH THE FULL ORDERING NUMBER AND MANUFACTURER'S BRAND. FOR APPLICATION SEE WDX5-57M PAGE WDX ROD LENGTH GUIDE ANGLE Ø ROD USED TO SUPPORT SCREW HOLE SOLID MODELING REQUIREMENTS. L SCRAP STOP FORD PART NUMBER W WDX FOR M SOC. HD. SCR (1) SLOTS ORDERING EXAMPLE WDX ROD LENGTH 29

28 FOR APPLICATION SEE W-DX5-53M PAGE 26 IF CONTOUR SHAPE IS REQUIRED ON BUTTON BLOCK, IT IS THE DESIGN SOURCE RESPONSIBILITY TO SPECIFY ALTER IN THE REMARKS COLUMN OF THE ESP REPORT. BUTTON BLOCKS B/2 L 90 A W/2 Ø6 H7 THRU Ø6 PULL DOWEL, 20mm IN LENGTH WITH M4 THREADED HOLE. BREAK ALL SHARP EDGES 0.4 X 45 B ± W MATERIAL SPECIFICATION: AISI 1 - EACH BUTTON BLOCK MUST BE PERMANENTLY MARKED WITH THE THE FULL ORDERING NUMBER AND MANUFACTURER'S BRAND. C ±0.01 E 270 F±0.01 X 45 (TYP.) Ø9 Ø1 ØD Ø H7 Ø11 ØG ALL DIMENSIONS WITHOUT TOLERANCE TO BE ±0.25 BUTTON DIA. ØD SLUG HOLE ØG DOWEL SLOT F FORD PART NUMBER DOWEL SLOT LOCATION 0 DEGREES 90 DEGREES 270 DEGREES L W A B C E WDX WDX WDX WDX WDX WDX WDX WDX WDX WDX WDX WDX WDX WDX WDX WDX WDX WDX

29 BUTTON RELOCATING BUSHINGS USE BUTTON RELOCATING BUSHING WHEN HOLE MOVES 5mm OR LESS. Ø6 H7 AS SHOWN (3) PLACES NOTE: SPECIFY (L) DIM. WHEN ORDERING. BUTTON MANUFACTURE TO MACHINE BUTTON AND DOWEL HOLE LOCATION BEFORE SHIPPING BUSHING. Ø6 PULL DOWEL, 20mm IN LENGTH WITH M4 THREADED HOLE. E ±0.01 D ±0.01 "L" BUTTON OFFSET 5mm MAX ØB +0.0 RELOCATION BUSHING FOR APPLICATION SEE W-DX5-53M PAGE 35 BREAK ALL SHARP EDGES 0.4 X 45 MATERIAL SPECIFICATION: AISI 1 ØA IF CONTOUR SHAPE IS REQUIRED ON BUTTON BUSHING, IT IS THE DESIGN SOURCE RESPONSIBILITY TO SPECIFY ALTER IN THE REMARKS COLUMN OF THE ESP REPORT. - EACH BUTTON BLOCK MUST BE PERMANENTLY MARKED WITH THE THE FULL ORDERING NUMBER AND MANUFACTURER'S BRAND. ØC ALL DIMENSIONS WITHOUT TOLERANCE TO BE ± MAX. X PRESS IN LEAD BACKING PLATE FORD PART NUMBER BUTTON DIA. BUSHING DIA. SLUG HOLE DIE BUTTON DOWEL SLOT BUSHING DOWEL SLOT ØA ØB ØC D E WDX WDX WDX WDX WDX WDX WDX

NORTH AMERICA ONLY GUIDELINES FOR DIES WITH PIERCING OPERATIONS

NORTH AMERICA ONLY GUIDELINES FOR DIES WITH PIERCING OPERATIONS GUIDELINES FOR DIES WITH PIERCING OPERATIONS 1.0 APPLICATION OF THE STANDARD THE FOLLOWING GUIDELINES APPLY TO ALL DIES WITH PIERCING OPERATIONS, E.G. BLANK, TRIM, PIERCE AND CAM DIES. 2.0 GENERAL INFORMATION