Date Stamps DIN. Material. H ardness. Ød2 Ø
|
|
- Jewel Rose Knight
- 6 years ago
- Views:
Transcription
1
2 DIN Ø Ød2 Ø 5 Year & Months Months Year 1. Inner Insert can not be removed from front, but be removed from the mould parting line in the machine after dismantle the mold. 2. Inner insert are replaceable, cost reduction. 3. Low-wear design. 4. The dowel pin holes on the bottom and the sides are used to stop the date stamps. 5. Position with inner ball bearing, arrows indicate exactly. Year & Months Months Years Ød
3 TAIWAN 1.Integral structure design, Inner insert is not replaceable. 2.The arrows indicate its digits exactly, With its excellent inner ball bearing structure. PCS size Year & Months Months Years Days 2nd digit 1st digit Shift Letters Diameter-Length 10 (1~12) 148
4 DIN h ± 0,02 t 3 d1 g6 M l 1 s Shift Days Months Years 15 1.Integral structure design, no replacement inner parts. 2.Turn clockwise infinitely and smoothly. 3.Mounting screws are available at the end, easy to install at back side. 4. Press the date stamp closely into mold with thumbs. s Shift Days Months Years 1 h 149
5 AISI ØF 1.Economical prices. 2.Simple structure. 3.Easily and smoothly adjustable inner insert that is removable using a screwdriver. ØDh7 L± L ØF ØDm6 Springs Body (Outer insert) Inner insert Engrave Size D L F
6 AISI 1.Indexable and front removable. 2.The arrows indicate its digits exactly, with the springs and ball. 3.Easily and smoothly adjustable inner insert that is removable using a screwdriver. Ø Ø Ø Dia. Size Drawings Dia. \Size Dia. Inner inserts and Outer rings Dia. \Size Dia. Year & Months Months Year Days 1st digit 2nd digit Blank Year Arrow Months Year Days 1st digit 2nd digit Blank
7 DIN Months Year & Months Years Inner Insert can be removed from front, no need to dismantle the mold, more simple. 2. inner inserts are replaceable, cost reduction. 3. Turn clockwise or counter-clockwise infinitely and smoothly. 4. Date stamps tight installation in parting mold. Size Months(1~12) Year and Months( 11+12Months) Years( 2011~) 152
8 DIN Patented product:double date stamps Patent No. ZL Integral structure design, Inner insert is not replaceable, 2. With 12 months and 6 years, cost reduction, effectively use the space, and durable. 3. Turn inner inserts clockwise to adjust the years, turn counter-clockwise to adjust the months, during the adjustment, it works smoothly. 4. Position with inner ball bearing and recess, arrows indicate exactly. 5. Can engrave years, months and days. 12 Months +Years Blank turn clockwise to adjust the years turn counter-clockwise to adjust the months clockwise clockwise 153
9 DIN 1. Simple Structure. 2. To fasten inside of the mold from the end. 3. Inner inserts can not be adjusted unlimitedly. 4. Inner inserts are not replaceable. 5. When adjusting, the inner inserts are not smooth enough. D d L M T s
10 10 0 DIN Simple Structure. 2. To secure outside of the mold by a threaded pin 3. Inner inserts can not be adjusted unlimitedly. 4. Inner inserts are not replaceable. 5. When adjusting, the inner inserts are not smooth enough. D d L M T a b c SW
11 DIN T M 1. Simple Structure. 2. To secure outside of the mold by a threaded pin 3. Inner inserts can not be adjusted unlimitedly. 4. Inner inserts are replaceable. 5. The inner inserts are adjusted smoothly. D d L M T 4 2, , , , , , ,
12 DIN L L2 Dh6 d1 M D d 1 L M L 2 S W L D H7 M L2 min SW 157
13 JIS Size Drawings Dia. \Size Dia. 2nd digit Days Blank year Blank Drawings Drawings Dia. Dia. \Size Dia. \Size Dia. Year & Months Year & Months 4Years 6Years Months Months 1st digit
14 Recycling Inserts AISI DIN A1 A A3 A4 A5 A6 A7 A8 A9 A10 A11 159
15 AISI Air valves 1. The air valves are used under the high vacuum and when the ejector pins have problem to eject ;and used to the products which surface is large and hart to strip off or Injection Products which are think and small. 2.Manufactured completely from stainless steel this unit has the advantage of high airflow,excellent rust resistance and heat elimination. 3.The working Principe is same as control air valve, using the air diffusion to achieve Automatization when under the high vacuum. 4. It settled the problem when the mold is under the special enviroment the design for ejector pin, Good air venting and reduced the scrap of the injection products. Air Air Gas exit 160
16 TAIWAN Air valves Spring Sping pin Inner valves Body 1. Body and valve are manufactured completely from stainless steel, Excellent rust resistance. 2. An effective method of release the vacuum created during plastic injection molding. 3. To substitute ejector pins or other ejector parts for diemould 4. Fix the insert valve with spring pin to avoid the dowel pin to be worked off. 161
17 DIN Air valves Inner inserts Body Springs Cover 2 beryllium-copper + stainless steel 1. Drill holes for air supply. Drill and ream guide bore for special counter bore. 2. Machine tapered counter bore using EDM or reamer for receiving air valve (match with concrete objects) 4. After pressing it into home position, the valve is secured against any extreme operation condition. 3. When placing Z 491loosely into receiving bore it will protrude approx. 0,9mm above the contour surface. AIR AIR AIR 162
18 DIN Double valves 0 C ØAm6 CH An effective method of semi pneumatic ejection 2. For tools with ribs or areas forming gas traps or vaccum condition. Drive in Drive out 163
19 AISI Air valves Air (closed) Air (opened) Mold closed Mold opened Spring Spring pin Inner inserts Body PV
20 TAIWAN Air Spigot Rubber ring Rubber ring Rubber ring KT01-1 KT01-2 KT01-3 KT01-4 KT01-5 KT01-6 Rubber ring 165
21 TAIWAN Air Spigot 166
Why Use. Pilot Assemblies. The New Industry Standard
Why Use Pilot Assemblies The New Industry Standard This product may be covered by one or more patents or patent applications. See http://www.standardlifters.com/patents.html for details. 01/17 - Rev. 11
More informationZero Point Clamping System. ZERO lock BALL lock
Zero Point Clamping System ZERO lock BALL lock kap3 kap 263 Technical information regarding ZERO lock Zero Point Clamping System Application The modularly designed, flexible ZERO lock Zero-Point Clamping
More informationMachine Your Fishing Reel
Machine Your Fishing Reel You will be well prepared for the coming season if you start on this smooth-running job now. IF you're an enthusiastic fisherman and have a lathe in your workshop, we'll say no
More informationIndustrial Drill Chucks with Key. For Stationary Machines and Portable Drilling Machines. Diameter (mm)
Drilling Industrial Drill Chucks with Key For Stationary Machines and Portable Drilling Machines Specifically designed for stationary drilling, turning, milling and wood working machines The one-piece
More informationThis Injection Mold Standard is used for the design and fabrication of Plastic Injection Molds.
This Injection Mold Standard is used for the design and fabrication of Plastic Injection Molds. 1. Mold Design 1.1. A preliminary mold design review will be conducted, preferably with the customer present,
More informationVardhman Dies And Mould Tools
+91-8048762549 Vardhman Dies And Mould Tools https://www.mouldtoolsindia.com/ Renowned manufacturers of HSS Piercing Punches, Ejector Pins, Molding Tools that are fabricated from high grade metal & alloys.
More informationTRAINING MANUAL. Part 3 REAMERS
PRESTO INTERNATIONAL UK LTD TRAINING MANUAL Part 3 REAMERS 1 Purpose of Reamers REAMERS A reamer produces an accurate and highly finished round hole to a much finer tolerance than that produced by a drill.
More informationSport-Thieme Handball Goal, 3x2 m, Free-Standing or socketed
Assembly instructions Art.-Nr.: 201 0915 203 4502 Sport-Thieme Handball Goal, 3x2 m, Free-Standing or socketed 0218214 2018 Sport-Thieme GmbH D-38367 Grasleben Germany sport-thieme.com info @sport-thieme.com
More informationTechnical features. Positive Taper Lock System for manual tool clamping. Technical features:
clamping set Technical features The RÖHM- was specially designed for the positive taper lock clamping taking particulary into account the necessity of manual clamping. Technical features: strong design
More informationNORTH AMERICA ONLY PIPE SLUG CHUTE DETAILS ALL DIMENSIONS IN INCHES
"B" B. C. PIPE SLUG CHUTE DETAILS ALL DIMENSIONS IN INCHES PVC - DWV PIPE FITTINGS FOR "X" SOC. HD. SCREW (N) HOLES "D" "C" "A" O.D. ALTER IF CONSTRAINED BY SPACE LIMITATION. (2) MIN. FASTENING HOLES REQUIRED.
More information.01 undercut. Ø.187 locating dowel hole (Ø.1875 x.50 pin included)
Mold Components 1 SPRUE BUSHINGS Made of AISI 6150 material; precision ground; polished I.D. Hardened to Rc 46-50 Dowel pin hole in head for locating (pin included) Radius under head with undercut to reduce
More informationLOC ATING COMPONENTS. Locating Components
Adjustable Jack Screws... 212 Adjustable Locating Buttons... 212 Alloy Steel Pull Dowel Pins...198 199 Bullet Nose Dowels... 219 Bullet Nose Pins... 220 Drift Handles... 213 Fixture Jacks... 212 Fixture
More informationDESIGN & ASSEMBLY GUIDE. D-M-E Collapsible Core and Collapsible Mini-Core
DESIGN & ASSEMBLY GUIDE D-M-E Collapsible Core and Collapsible Mini-Core TABLE OF CONTENTS D-M-E Collapsible Core & Collapsible Mini-Core This data is designed to assist you in using the D-M-E Collapsible
More informationSport-Thieme. Handball Goal. Assembly instruction. 3x2 m, Free-standing with Fixed Net Brackets
Assembly instruction Sport-Thieme Handball Goal Cat.-no.: 115 0953 2392905 239 2918 113 6500 239 2400 239 2413 3x2 m, Free-standing with Fixed Net Brackets Thanks for choosing Sport-Thieme equipment! In
More informationMould Precision Co., Ltd
Program Name: Part Name: Tool Name: Tool Source: Tool Steel: Resin: NL9502 314501 MP1425 Mould Precision Co., Ltd Finished Mould Checklist H13 HRC 48-52 ABS HF380(LG Chem) Program No.: Part No.: Tool No.:
More informationSpiderbeam Balun Construction Guide
BALUN CONSTRUCTION GUIDE Ver. 1.0 1 The components of the Balun Kit are in a plastic bag. Most of the components are inside the plastic case of the balun. The aluminum U-profile and the RG-142 Teflon Coax
More informationDesign of Jigs, Fixtures, Press Tools and Moulds UNIT - 1 LOCATING AND CLAMPING PRINCIPLES
Design of Jigs, Fixtures, Press Tools and Moulds UNIT - 1 LOCATING AND CLAMPING PRINCIPLES 1. Define the term Tool design. Tool design is the process of designing and developing the tools, methods, and
More informationWHAT? WHERE? HOW?
JIGS WHAT? WHERE? HOW? Introduction Mass production aims at high productivities to reduce unit cost and inter-changeabilites to facilitate easy assembly. Jigs are useful in mass production. They provide
More informationClamping bolts Eccentrical cams clamping units
2.3 Shaft Clamping bolts Eccentrical cams clamping units 2.9 2.8 2.7 2.6 2.5 2.4 2.3 2.2 2.1 2.3 Clamping bolts, Eccentrical cams, Shaft clamping units Page 641 2.3 Clamping bolts, Eccentrical cams, Shaft
More informationOperating instructions. Fine boring head Ø3-88 with digital display
Operating instructions Fine boring head Ø3-88 with digital display English 1. Basic safety information Before first use, please read the operating instructions carefully. These provide important safety
More informationKNOB LATCH. Specifications: Glass-To-Wall Installation CAT NO. LAT001 C.R. LAURENCE CO., INC. PROFESSIONAL QUALITY
Specifications: Material: Solid brass Hole Size Required: 7/8" (22mm) Glass Thickness Range: 3/8" (10mm) to 1/2" (12mm) Includes: Knob, Tapered Strike for wall-to-glass installation and J-Hook for glass-to-glass
More informationMould Precision Co., Ltd
Mould Precision Co., Ltd Program Name: Part Name: Tool Name: Tool source: Tool Steel: Resin: Finished Mould Checklist Program No.: MP15016 NL00326-2G rev04 Part No.: MP15016 Tool No.: MP15016 Customer:
More informationMaintenance Information
16601023 Edition 2 January 2014 Air Impact Wrench 2705P1 Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings, and to avoid these
More informationVhu. Universal Boring Heads Vhu 2 1/8, 3 1/8, 4 7/8, 6 ¼. Vhu. Instruction Manual No.:
Instruction Manual No.: 2420304 Vhu Vhu Universal Boring Heads Vhu 2 1/8, 3 1/8, 4 7/8, 6 ¼ Producer: Moskevska 63 101 00 Praha 10 Vrsovice Czech Republic Phone: +420 246 002 249 Fax: +420 246 002 335
More informationGeneral Four-Way Operation, Maintenance & Service Manual
General Four-Way Operation, Maintenance & Service Manual SCOPE Included in the following pages you will find assembly drawings, exploded views, parts lists, assembly tips, operational descriptions and
More informationANCHORS SLEEVE ANCHORS BOLT DIAMETER
SLEEVE ANCHORS No hole spotting. No mis-alignments. Simply drill through the fixture into concrete, insert and tighten. Preassembled for fast, easy installation. No special tools necessary; meets federal
More informationassembly instructions
door opens outwards door opens inwards front cubicle door opens outwards or inwards with side panel seite 1 ensure that the supplied parts are complete by checking the packing list. make sure that tools
More informationClamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
More informationAFP Pneumatic Rotary Actuator User s Instructions
AFP Pneumatic Rotary Actuator User s Instructions [REV. 0.2] This actuator has been tested up to 5 million cycles. There are two adjustable stoppers s that ensure that the valve is never overloaded. This
More informationBuilding Rudy Kouhoupt s Walking-Beam Engine
Building Rudy Kouhoupt s Walking-Beam Engine Some time ago I came across a copy of Rudy Kouhoupt s article: "Build this Walking-Beam Engine" (Popular Mechanics August 1969), and decided to try and make
More informationWM en. Zero point clamping system system 3000
Zero point clamping system system 3000 unique push-on very strong automatic monitoring flush mounted SPEEDY and spigot handling without interfering contour 50kN retention force suitable for automation
More information...thoroughly tried and tested!
...thoroughly tried and tested! Tapping and bushing with EWE tools www.ewe-armaturen.de Installation and operating instructions for EWE drilling units 1. Details of product 1.1. Application field EWE tapping
More informationDIVIDING EQUIPMENT DIVIDING EQUIPMENT
64 DIVIDING EQUIPMENT 65 D-01 UNIVERSAL TILTING ROTARY TABLE Model: HUT-300 QUICK MANUAL INDEXING. Suitable for milling, boring, shaping, drilling, dividing, setting angles and for circular cutting. Tilting
More informationNELSON STUD WELDING ACCESSORY SPECIFICATION: Stud Weld Gun Imperial Dimension Chucks
Type 1 4 #2 Morse Taper Mounting NELSON STUD WELDING ACCESSORY SPECIFICATION: Stud Weld Gun s Below is a list of standard imperial chucks for use in welding Nelson studs. The chucks are listed with both
More informationSAWS, PIPE CUTTERS. Design. Blade
SAWS, PIPE CUTTERS Design With the handy pistol shape, already laid pipes can be quickly and easily shortened. Pumping movements release the ratchet mechanism and the blade is thus pushed through the cutting
More informationOperating instructions. Twin cutter boring head Ø mm
Operating instructions Twin cutter boring head Ø23.5-153.0 mm English 1. Basic safety information Before first use, please read the operating instructions carefully. These provide important safety information
More informationBC-SERIES Screw-Jack Pedestal for Creative Design. Specifications text. Menu. Page 1/7
Specifications text BC Series Screwjack Pedestal 3rd Generation Menu Introduction of the BC series 1 Pedestal 1.1 Head 1.2 Base 2 Sleeve 3 Tabs 4 Lock 5 Slope corrector PH5 6 Slope corrector BC-PH5 7 Reverse
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
Made of hardened and tempered tool steel with ground points. es have knurled grip. Set consists of 1 each of 5 punches in plastic pouch. Point Size Length 1/16 3 3040004 5/64 4 3040005 3/32 4 3040006 9/64
More informationWhy Use Guided Keepers
Why Use Guided Keepers Guidance and Retention - ALL-IN-ONE This product may be covered by one or more patents or patent applications. See http://www.standardlifters.com/patents.html for details. 12/13
More informationInfo PSR-PSM-MRT. Slide Retainers
Info PSR-PSM-MRT ME Slide Retainers provide a compact and economical means of slide retention which obsoletes the cumbersome external spring or hydraulic methods. Interference with machine tie bars or
More informationHigh Precision Air Chucks
Precision Workholding Solutions High Precision Air Chucks www..com Improve productivity and lower the cost of secondary machining operations..... through high concentricity. Holding close concentricity
More informationStudent, Department of Mechanical Engineering, Knowledge Institute of Technology, Salem, Tamilnadu (1,3)
International Journal of Scientific & Engineering Research, Volume 7, Issue 5, May-2016 11 Combined Drilling and Tapping Machine by using Cone Mechanism N.VENKATESH 1, G.THULASIMANI 2, S.NAVEENKUMAR 3,
More informationComparative Measurement
Comparative Measurement H-1 TESA YA Bore Gauges TESA YA Complete Instrument SETS Specially designed for small bores from 0,47 up to 12,20 - Checking of dimension and bore form errors through 2-point measuring
More information50, ,000 18,800 8,000. CODE 04 ER (ER ) UPC Chuck/W ITS Central Chuck. CODE 04 ER (ER ) UPC Pallet For Alignment
CODE 04 ER-007826 (ER-017777) UPC Pallet For Alignment CODE 04 ER-007823 (ER-016092) UPC Chuck/W ITS Central Chuck Application To align angular position and to determine the center of UPC chucks. Please
More information. Dimensions of the Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding.
Clamping technology. Dimensions of the Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding. DIN 55026 Taper sizes 4 and above with drive tang. Spindle
More informationFasteners. For Use in. Stainless. Steel Sheets. Revised 108
Fasteners For Use in Stainless Steel Sheets Revised 108 FASTENERS FOR USE IN STAINLESS STEEL SHEETS One of the very basics of self-clinching is that the fastener must be harder than the host sheet. Only
More informationHBS-AP ASSEMBLING INSTRUCTIONS
ALUMINIUM PIPEWORK - ALUMINIUM PIPEWORK - ALUMINIUM PIPEWORK 97 HBS-AP ASSEMBLING INSTRUCTIONS 1. INTRODUCTION 1.1. This manual is very easy to consult and we recommend reading it before starting work,
More informationMOTOR & BULK HEAD. A Manual for Repair and Maintenance Technicians
MOTOR & BULK HEAD A Manual for Repair and Maintenance Technicians CAUTION This manual is designed to help technicians who are already experienced in workshop procedures and know how to handle tools. Only
More informationEnsat driving tools...
nsat driving tools... On this page, you can configure the optimum tool for your application. A configuration is provided in the following as an illustrative example. The article number is composed of two
More informationPREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
PROFILE SYSTEM PRE-ASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS s r ood gni d i l s dna gni t f i l r o f s t neme l e de l bme s s a - er P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS MINITEC
More informationHolemaking Products & Accessories
Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get
More informationOPERATIONAL AND MAINTENANCE MANUAL. Drilling machine ProDrill 20 INSTRUCTION MANUAL FOR USE AND MAINTENANCE
MOD 14-02 OPERATIONAL AND MAINTENANCE MANUAL Rev. 0 Data 01/02/2012 Drilling machine ProDrill 20 INSTRUCTION MANUAL FOR USE AND MAINTENANCE TABLE OF CONTENTS TECHNICAL SPECIFICATIONS 2 USE 4 MAINTENANCE
More informationWire Electric Discharge (ED) Machining
Wire Electric Discharge (ED) Machining Tampere University of Technology Tuula Höök Wire electric discharge (ED) machining is based on the same principle as die-sink ED machining. The basic elements in
More informationThe Ensat self-tapping threaded
The nsat self-tapping threaded insert nsat is a self-tapping threaded insert with external and internal threads,cutting slots or cutting bores. A continuous process of further development has brought about
More information20 Flat Nose Pliers. 22 Round Nose Pliers ØD1 DIN ISO short, flat jaws serrated gripping surfaces special tool steel, oil-hardened and tempered
20 Flat Nose Pliers DIN ISO 5745 short, flat jaws serrated gripping surfaces special tool steel, oil-hardened and tempered 20 01 160 20 02 160 20 06 160 Part No. Head Handles Dimensions Weight Length W3
More informationWhite Industries Front Hub Instructions
White Industries Front Hub Instructions Tools required: 2mm hex/allen wrench, set of sockets, mallet, bearing puller, bearing press. Disassembly 1. Loosen the set screws, there are three or one depending
More informationTooling Approving Report
Project Name: Part Name: Tool Name: Tool source: Tool Steel: Resin: Project Number: Part Number: Tool Number: Customer: No of Cavities: Machine Size: CAVITY What is the customer required core hardness?
More informationOn-roof system Alpha + Product catalogue
On-roof system Alpha + Product catalogue Contents ALPHA +... 3 1. ALPHA + BASE RAILS... 4 2. ALPHA + SPLICES... 5 3. ALPHA + TELESCOPING END PIECES... 6 4. ALPHA + INTER-MODULE CLAMPS AND MODULE END CLAMPS...
More information12. Wings, Flaps, Ailerons and Struts
12. Wings, Flaps, Ailerons and Struts Fit Aileron Hinges Reference: Drawing 20270K2 Photo 12.1 Parts Required: 2007092 Aileron LS 200809N Aileron RS 2001394 Hinge 3/16 A1 (4) 2001694 Hinge Pin (4) PH0059N
More informationPROVIDENT DESIGN CHECKLIST
PROVIDET PROCUREMET WWW.PROVPROCURE.COM PLASTIC IJECTIO MOLD DESIG CHECKLIST MOLD DESIG CHECKLIST PROVIDET PROCUREMET ITRODUCTIO Before you start with a new Mold you need to get as MUCH information on
More informationFixings & Fastenings. Bright Zinc Plated, Galvanised & Stainless Steel. Lockinex. ea i, ea u i
Fixings & Fastenings Bright Zinc Plated, Galvanised & Stainless Steel Lockinex ea i, ea u i INTRODUCTION The Lockinex Range of Fixings & Fastenings are manufactured in Bright Zinc Plate, Hot dipped galvanised
More informationBuilding a vertical wobbler
Building a vertical wobbler I wanted to build a simple steam engine that would also run on compressed air. At Chris Heapy s website (http://easyweb.easynet.co.uk) I found drawings of a small double acting
More informationstackit stack mold system
stackit stack mold system Introducing a system for efficiently designing, building, and maintaining stack molds. The product range addresses Center Section Positioning, Center Section, and Ejector Actuation.
More informationQuill Stop V2 Installation Guide 11/16/2014
Thank you for purchasing the Quill Stop for the Sieg X3 (Grizzly G0463) and SX3 (Grizzly G0619) mills. Your feedback is always appreciated. Please email questions and comments to gregpriest@cox.net. What
More informationRODIA Diamond Core Drilling Hand-Operated and Stationary Wet Drilling
Hand-Operated and Stationary Wet Drilling RODIADRILL Ceramic ECO Hand-operated and stationary wet drilling machine, drill Ø 6-67 mm Further developed for hand-operated and stationary wet drilling in the
More informationPUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING
PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight
More informationGreenslade & Company, Inc. USA
Greenslade Recess TIR Gaging System Patent # 5,182,865 Gage Application: The Recess TIR Gage is designed to make the measurement of the concentricity of the screw s drive system and head O.D. to its shank
More informationDGA LINE CATALOG
DGA LINE CATALOG 2018-2019 CONTENT PRODUCTS DGA Line 3 Order overview DGA Line 4 3-jaw chuck for fast clamping made on aluminum 6 Chuck with basic and top jaws for use in measuring technology 6 Basic jaw
More informationV twin cylinder steam engine
V twin cylinder steam engine I got inspired to make this V twin steam engine after reading R. Griffinn s build articles in ME 4396. It is based on Stuart s V-twin double-acting oscillator, but since I
More informationOPERATING INSTRUCTIONS MODULGRAV. Tel. +49 (0) Fax +49 (0) homepage:
OPERATING INSTRUCTIONS MODULGRAV Kolpingstraße -7 D-784 Singen / Htwl. Postfach 80 D-784 Singen / Htwl. Tel. +49 (0) 77 88-0 Fax +49 (0) 77 88 66 e-mail: info@elma-ultrasonic.com homepage: www.elma-ultrasonic.com
More informationPneumatic Drill / / Technical Specification
CS UNITEC Pneumatic Drill 2 2502 0010 / 2 2502 0030 2 2506 0010 / 2 2506 0030 Technical Specification Model with Lever Throttle Model with Twist Throttle with Selfresetting 2 2502 0010 2 2502 0030 2 2506
More informationAllen & Allen Company
Sliding Door Hardware 71-222 Assembly Single Door Sets up to 100 lbs./door Adjustable, top mount, for door thickness 3/" and up. Included in 71-222 Hardware Set: 7001 Track, two No. 7000 carriers, two
More informationGATE INSTALLATION INSTRUCTIONS
GATE INSTALLATION INSTRUCTIONS 1) Ensure posts for gate are fully installed. Posts need to be securely fastened to decking or concrete such that they will not sag with weight of the gate. For a single
More informationASSIGNMENT 4. Textbook Assignment: The point, edge, face, heel, and tang are the five parts of which of the following tools?
ASSIGNMENT 4 Textbook Assignment: "Files," "Grinders and Sharpening Stones," "Scrapers," "Awls," "Bolt and Cable Cutters," "Glass Cutters," "Knives,' 'Pipe Cutting and Threading Tools," "Tube Cutting and
More informationKnotted Shank Brushes
Knotted Shank Brushes Knot Wheel Brushes with Shank 6 mm Ø D A H Z RPM Pack. steel 0.35/0.014" steel 0.50/0.020" stainl. 0.50/0.020" mm /inch mm /inch max. Art. No. Art. No. Art. No. 75 / 3 9 / 3/8 15
More informationEngineering Data Pilot Assemblies
Engineering Data Pilot Assemblies The New Industry Standard This product may be covered by one or more patents or patent applications. See http://www.standardlifters.com/patents.html for details. 01/17
More informationBHJ Products, Inc. Parts List & Instructions
Product Name: O-Ring Groove Cutter Page 1 of 6 Kit Contents: 1x Cutter Head Assembly with Handle & Adjustable Tool Block 1x Graduated Adjusting Screw 1x Adjustable Tool Holder 1x Carbide Insert (Size of
More information2 Cylinder Slidevalve Steam Engine
2 Cylinder Slidevalve Steam Engine By Thor Hansen After making a slide valve engine that I managed to get running I decided to try and make a 2-cylinder version. Since the first one was a vertical steam
More informationThis is trial version
Guiding components, Locating units, Dowel pins, Screws, Springs, Dateand recycling inserts, Retaining rings, Lifting devices, Clamping-systems, Thermal insulating sheets, Locating rings 1.01 1.02 Ordering
More informationA leading supplier & manufacturer of precision engineered components
A leading supplier & manufacturer of precision engineered components T: +44 (0) 1536 461140 F: +44 (0) 1536 461662 E: sales@technifast.co.uk W: www.technifast.co.uk T: +44 (0) 1536 461140 F: +44 (0) 1536
More informationTaking MIM Tooling To the Next Level. Originally published in The American Mold Builder Magazine, February 2014
Taking MIM Tooling To the Next Level Originally published in The American Mold Builder Magazine, February 2014 1 Metal injection molding (MIM) merges two established technologies, plastic injection molding
More informationLocks and Catches Catches and Furniture Bolts
Magnetic catch with low noise closure Material: Plastic housing Version: with closed surface and internal magnet, magnets no viewable : Press fixing Pull 0. kg, for drilling hole Ø8 mm white 26.01.701
More informationDimensions of the machine spindle heads in accordance with DIN The latest issue of the DIN sheet is binding
Info Dimensions of the machine spindle heads in accordance with DIN The latest issue of the DIN sheet is binding DIN 55026 from taper size 4 with driver. Spindle head Size C1 C2 D hole count outer olt
More informationInsertion Transducer On-line Install Instruction
LOGO Insertion Transducer On-line Install Instruction Shanghai Dynameters Co., Ltd www.dynameters.com Insertion Transducer Installation Manual Installation steps 1. Locate Installing point 2. Weld mounting
More informationPneumatic Robot arm/digger
1 0 6. 1 8 6 Pneumatic Robot arm/digger Please Note The OPITEC range of projects is not primarily intended as toys for young children. It is for teaching, designing and making to ensure that pupils experience
More informationDOLPHIN TITAN CHANGING UNIT. Carrying capacity of more than 400kg
967 269 Plan 798 Elevation 100 626 Section BC101ES DOLPHIN TITAN CHANGING UNIT Carrying capacity of more than 400kg An alternative design embodying strength, safety and hygiene in a robust construction
More informationDanly Die Sets CATALOG DIE SETS. Quality & performance Quick delivery Precision Components
Danly Sets TM CATALOG DIE SETS Quality & performance Quick delivery Precision Components 1 TM Danly Sets www.anchordanly.com CATALOG DIE SETS Service We Deliver and Quality You Can Depend On Danly Sets
More informationMueller Gas Products. Mueller H17800 Curb Stop Tee No Blo Curb Stop Tee Weld x Weld 1440 PSI
Mueller Gas Products Distributed by: Mountain States Pipe and Supply Colorado Springs, Colorado 80903 1 800 777 7173 Mueller H17800 Curb Stop Tee No Blo Curb Stop Tee Weld x Weld 1440 PSI MUELLER NO-BLO
More informationThe Speed of Live and the Accuracy of Fixed
The Speed of Live and the Accuracy of Fixed SG10A CYLINDER HEAD SEAT & GUIDE MACHINE Light Weight Work Head The SG10A has a light weight work head for fast and accurate centering for the minimum concentricity.
More informationWooden Frame Type Instruction Manual
Wooden Frame TypeInstruction Manual Thank you for selecting our product. Before starting installation, please read this manual thoroughly to ensure correct installation. Please keep this manual at hand
More informationReamer Basics. Fixed Reamers The reamer size is fixed and any size reduction due to wear or sharpening cannot be reclaimed
1 Reamer Basics Reamers are available in a variety of types, materials, flute styles and sizes The typical reamer is a rotary cutting tools designed to machine a previously formed hole to an exact diameter
More informationBOOKCASE WARNING. Illustration 1
Illustration 1 Lower Back Panel Upper Back Panel Cam Connector Illustration 2 Left end Illustration 3 Cam Bolt Adjustable Shelf Left end Left End Panel Bottom/ Center Shelf Connector Cover Right End Panel
More informationSpring Loaded Contacts
Spring Loaded Contacts Contents ATE Spring Probes Specifications One Part Probes Two Part Probes Spring Loaded Contacts Specifications Spring Loaded Contact Connectors Single Spring Loaded Contacts SMT
More informationINSTALLATION INSTRUCTIONS KK-K9-C12-K CHEVY IMPALA
INSTALLATION INSTRUCTIONS KK-K9-C12-K 2000-2005 CHEVY IMPALA READ ALL INSTRUCTIONS PRIOR TO INSTALLATION TOOLS REQUIRED: Power Drill Drill bits1/4 and 5/32 7/l6 wrench and socket 15,18 and\or 19mm socket
More information. Dimensions of Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding
ß Clamping tools. Dimensions of Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding DIN 5506 Taper sizes 4 and above with driver. Spindle No. of holes
More informationO-Sullivan King 4 Poster Bed O-Sullivan Queen 4 Poster Bed Parts and Hardware List
Parts and Hardware List A. Left Headboard Post 1 pc B. Right Headboard Post 1 pc C. Left Footboard Post 1 pc D. Right Footboard Post 1 pc E. Headboard Panel 1 pc F. Footboard Rail 1 pc. Spindles 4 pcs
More informationEngineering Data Pilot Assemblies
Engineering Data Pilot Assemblies The New Industry Standard This product may be covered by one or more patents or patent applications. See http://www.standardlifters.com/patents.html for details. 12/13
More informationMaster TAPERLOCK GAUGE BLOCK
Master Taperlock Fastener Gauge Kit Master TAPERLOCK Fastener Gauge Kit UTK-268002-27-4 KIT, Group 1 thru 4 UNITED S Master Taperlock Fastener Gauge Kit contains all of the required gauges and tools to
More informationThanks for shopping with Improvements! Dover Rolling Cart Item #583244
Thanks for shopping with Improvements! Dover Rolling Cart Item #58344 Note: Read these instructions carefully before assembling. Tools required: Philips screwdriver (not included). Find a clean, smooth
More information