Comparable ISO Standard. Date of current standard/modified
|
|
- Marjorie Lorena Ross
- 5 years ago
- Views:
Transcription
1 Title Standard All-metal prevailing torque All-metal prevailing torque EN ISO EN ISO Comparable ISO Standard Date of current standard/modified out out Countersunk (flat) tapping with cross recess Cross recessed countersunk (flat) (Countersunk s according Title of replacement standard type (all-metal hexagon nuts), style 2 - Property classes 5, 8, 10 and 12 type all-metal hexagon nuts, style 2, with metric fine pitch - Property classes 8, 10 and 12 out out Cross recessed countersunk (flat) tapping (common style) Countersunk flat (common style) with type H or type Z cross Comment Only one dimension. Only one dimension. Only one dimension. Head and countersunk angles Nominal size ; dimension ; length ; strength 8.8 included (see Part 2);
2 to ISO) Cross recessed countersunk (oval) (Countersunk s according to ISO) Cross recessed countersunk drilling with tapping screw Cross recessed pan drilling with tapping screw Cross recessed pan tapping Cross recessed raised countersunk drilling with tapping screw Drilling with tapping screw - Mechanical and functional properties Full-length parallel grooved, with chamfer Fulllength parallel grooved, with pilot Fulllength taper grooved Half-length reverse-taper grooved Half-length taper grooved One-thirdlength centre grooved Grooved pins with countersunk Grooved pins with round Hexagon Bolts without Hexagon Nut - with Hexagon Nut, Type g recess - Property class 4.8 Countersunk raised (common style) with type H or type Z cross recess - Product Cross recessed countersunk drilling with tapping screw penetration depth of cross slots Nominal size ; dimension ; length ; strength 8.8 ; penetration depth of cross slots single standards (EN ISO 10666, 15480, 15481, 15482, 15483); ST 3.9 ; hexagon with collar and slot (Form L) single standards (EN ISO Cross recessed pan 10666, 15480, 15481, drilling 15482, 15483); ST with tapping screw 3.9 ; hexagon with collar and slot (Form L) Cross recessed pan tapping Marginal change of. Caution with automatic feed and connection systems Cross recessed single standards (EN ISO raised countersunk 10666, 15480, 15481, drilling 15482, 15483); ST with tapping screw 3.9 ; hexagon with collar and slot (Form L) Drilling with single standards (EN ISO tapping screw 10666, 15480, 15481, - Mechanical 15482, 15483); ST and functional 3.9 ; hexagon properties with collar and slot (Form L) Full-length parallel grooved, with chamfer Full-length parallel grooved, with pilot Full-length taper grooved Half-length reverse-taper grooved Half-length taper grooved One-third-length centre grooved Grooved pins with countersunk Grooved pins with round Hexagon bolts - Product grade C Chamfer re Chamfer re
3 Hexagon bolts, Metric fine, Types m and mg Hexagon flange bolts Hexagon bolts with shank; M 1,6 to M 39 screw s, Hexagon Hexagon nuts with flange Hexagon nuts; Metric Thread, Type g Hexagon nuts; Metric screw s; Hexagon nuts; Metric screw s; Hexagon, Thread Approximately to Head, Metric Thread, Type g Hexagon socket countersunk Hexagon socket cap with cone with cup with dog with flat with M 1,6 to M 10 s with M 1,6 to M 52 and M 8x1 to M 52x s with M 1,6 to M 52 and M 8x1 to M 52x (chamfered) with metric fine pitch - Product grades A Hexagon bolts with flange, heavy series Hexagon bolts - Hexagon - Product grades A Hexagon nuts with flange Hexagon nuts - Product grade C Hexagon nuts, style 1 - Product grades A Hexagon nuts, style 1, with metric fine pitch - Hexagon - Product grade C Hexagon socket countersunk Hexagon socket cap with cone with cup with dog with flat (unchamfered) - Product grade B (unchamfered) - (unchamfered) - Dimensions partially ; width across flats according to ISO 272; strength 12.9 Fine to be included in a separate standard later); width across flat M10 Width across flats according ; nominal diameter reduced Nominal diameter, height of the nut partially; nuts with fine specified in EN ISO 8673; width across flats according to ISO 272 included Nominal diameter, height of the nut partially; nuts with regular type screw specified in EN ISO 4032; width across flats according to ISO 272 included Nominal size range ; fine deleted (ISO 21269) Nominal sizes M1.4, M1.8, M14, M18 and M22 Nominal sizes M1.4, M1.8, M14, M18 and M22 Nominal sizes M1.4, M1.8, M14, M18 and M22 Correlation of with 439-1, except for the width across flat of the nut M10 In tables 1 and 2 abbreviations and some specifications ( ) Standard divided by regular type screw s and fine s; width across flats according to ISO 272
4 s with M 1,6 to M 52 and M 8x1 to M 52x s Hexagon washers drilling with tapping screw High-strength hexagon bolts with large widths across flats for structural steel bolting High-strength hexagon nuts with large widths across flats for structural steel bolting M 8x1 to M 100x4 hexagon bolts with fine pitch Mushroom square neck bolts Parallel pins of unhardened steel and austenitic stainless steel Parallel pins with internal Parallel pins with internal, of unhardened and austenitic stainless steel Parallel pins, Hardened; Tolerance Zone m6 Extra large series, product grade C Plain washers for clevis pins; product type - Allmetal hexagon nuts with flange (unchamfered) with metric fine pitch - Product grades A ; nominal size range ; fine see ISO 8675 Standard divided by regular type screw s and fine s; width across flats according to ISO 272 ; nominal size range ; regular type screw see ISO 4035 single standards (EN ISO Hexagon washers 10666, 15480, 15481, drilling 15482, 15483); ST with tapping screw 3,9 ; hexagon with collar and slot (Form L) High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies Hexagon with metric fine pitch - Parallel pins of unhardened steel and austenitic stainless steel Parallel pins with internal, of hardened and martensitic stainless steel Parallel pins with internal, of unhardened and austenitic stainless steel Parallel pins of hardened and martensitic stainless steel (Dowel pins) Extra large series, product grade C Plain washers for clevis pins; product type - All-metal hexagon nuts with flange Nominal length re (with round end) form A+C deleted Dimensions partially Dimensions partially Nominal sizes, nominal size 24 size "a" re to the maximum, square-end hole Form R ; (standard 440 still valid) Nominal sizes Width across flat M10
5 type allmetal hexagon nuts type allmetal hexagon nuts type hexagon nuts with flange ), with metric fine pitch type type type type type hexagon thin nuts with nonmetallic washers with a hardness from 300 HV, hexagon bolts and nuts washers with a hardness from 300 HV, hexagon bolts and nuts washers with a hardness up to 250 HV, cheese washers with a hardness up to 250 HV, hexagon bolts and nuts washers with a hardness up to 250 HV, hexagon bolts and nuts type (all-metal hexagon nuts), style 2 - Property classes 5, 8, 10 and 12 type all-metal hexagon nuts, style 2, with metric fine pitch - Property classes 8, 10 and 12 with flange (with non-metallic ), with metric fine pitch ), style 1 - Property classes 5, ), style 1, with metric fine pitch - Property classes 6, ), style 1 - Property classes 5, ), style 1, with metric fine pitch - Property classes 6, type hexagon, thin nuts (with nonmetallic ) Plain washers, chamfered - Small series, Plain washers, chamfered - Width across flat M10 Pyramid diamond hardness 140 HV cancelled; rating
6 washers with a hardness up to 300 HV, cheese Product grade C washers, hexagon bolts and nuts Raised countersunk (oval) ; tapping with cross recess Recessed raised cheese (fillister) Slotted cheese - Slotted countersunk (flat) (Countersunk s according to ISO) Slotted less with shank Slotted pan - Slotted raised countersunk (oval) (Countersunk s according to ISO) Slotted set with cone Slotted set with cup Slotted set with flat Slotted set with long dog Slotted set with long dog Coiled, heavy duty Coiled, standard duty Slotted, heavy duty straight pins, slotted, light duty Thread rolling for ISO metric - Part 1: Technical specifications for case hardened and tempered Small series, Product grade C Cross recessed raised countersunk (oval) tapping Pan with type H or type Z cross recess - product Slotted cheese - Slotted countersunk flat (common style) - Product Slotted less with shank Slotted pan - Product Slotted raised countersunk (common style) - Slotted set with cone Hexagon tapping Slotted set with flat Split pins Unhardened taper pins Slotted set with long dog Coiled, heavy duty Coiled, standard duty Slotted, heavy duty Slotted, light duty Thread rolling for ISOmetric Unhardened taper pins Nominal sizes Nominal sizes Head and countersunk angles Nominal size ; dimension ; length ; penetration depth of cross slots Modifications of < 2,5; dimension of slots ; partly nominal lengths deleted; strength 8.8 deleted Nominal size ; dimension ; length ; strength 8.8 cancelled Thread included; of and slot ; strength 8.8 deleted Nominal size ; dimension ; length ; strength 8.8 cancelled Range of nominal diameters and lengths extended. Shear range. Range of nominal diameters and lengths extended. Shear range. Specification "non-jamming" included; chamfer re; partial change of Specification "non-jamming" included; chamfer re; partial change of Normative revision, values for case-hardening depth and hole size revised, torque values reduced Nominal length re (with round end)
7
3. ISO information on technical standardisation changeover to ISO
3. ISO information on technical standardisation changeover to ISO 3.1 Code Technical standardisation is work of harmonisation in the technical field that is carried out jointly by all interested parties.
More informationISO INFORMATION ON TECHNICAL STANDARDISATION CHANGEOVER TO ISO
ISO INFORMATION ON TECHNICAL STANDARDISATION 3.1 Code Technical standardisation is work of harmonisation in the technical field that is carried out jointly by all interested parties. Its aim is to stipulate,
More informationIn troduction Product descriptions and product changes Standardization DIN ISO EN 5
CONTENT In troduction 4 1. Product descriptions and product changes 5 2. Standardization 5 2.1 DIN 5 2.2 5 2.3 EN 5 3. Small slotted or cross recessed screws 6 3.1 DIN comparison of the dimensions of small
More informationInformation about norm changes
Information about norm changes In line of the international adjustments of several norms following have been changed: OLD NEW NEW NEW Article DIN DIN-ISO DIN-EN-ISO DIN-EN Taper pins unhardened (1) 22339
More informationMATERIAL AND EQUIPMENT STANDARD FOR METRIC TYPE FASTENERS (SCREWS, BOLTS, STUDS, NUTS AND WASHERS) ORIGINAL EDITION DEC. 1997
MATERIAL AND EQUIPMENT STANDARD FOR METRIC TYPE FASTENERS (SCREWS, BOLTS, STUDS, NUTS AND WASHERS) ORIGINAL EDITION DEC. 1997 This Standard is the property of Iranian Ministry of Petroleum. All rights
More informationAUDAS. Tel: Fax: No.259 Baichi north Rd.Haiyan.Zhejiang.
Standard State SECTION A : SCREW THREAD Basic elements of screw thread design ANSI/ASME B1.7M Nomenclature.Definitions and letter symbols for screw thread ASME B1.1 Unified inch screw thread ( UN and UNF
More informationc. Pins, bolts, and retaining rings b. Washers, locking nuts, and rivets
62 20 HW 8: Fasteners / Force, Pressure, Density Mechanical Systems DUE Mon, 11/21/16 Start of class Check link on website for helpful fastener information Please use a scantron. Material is based primarily
More information28 DIN417 Slotted set srews with full dog point ISO DIN427 Slotted set srews with chamfered end ISO2342
Item DIN-Standard Desciption in English ISO-Standard 1 DIN1 Taper pins ISO2339 2 DIN7 Parallel pins ISO2339 3 DIN84 Slotted cheese head screws ISO1207 4 DIN85 Slotted pan head screws ISO1580 5 DIN93 Tab
More informationChapter 7. Fasteners
Chapter 7 Fasteners LEARNING OBJECTIVES After studying this chapter, students will be able to: Identify several types of fasteners. Explain why inch-based fasteners are not interchangeable with metric-based
More informationDelivery Programme _Leveringsprogramma2013_Kobout engels.indd :00
Delivery Programme 291068_Leveringsprogramma2013_Kobout engels.indd 1 01-02-13 16:00 Delivery Programme With more than 25,000 different stock articles, Kobout is your partner for fasteners. The delivery
More informationCompany Profile: We have pleasure in introducing FASCO GULF Building. Fastener Grades :
Company Profile: We have pleasure in introducing FASCO GULF Building Materials based in Dubai,UAE. Since 1994 Fasco is a sales & service oriented and professionally managed company specialized in dealing
More informationMETRIC FA S T E N E R S
METRIC FASTENERS CAP SCREWS & BOLTS DIN 603 Carriage Bolt, A2 SS DIN 603 Carriage Bolt, A4 SS DIN 931 Class 8.8 Hex Cap Screw, Steel Zinc DIN 931 Class 10.9 Hex Cap Screw, Plain Steel DIN 933 Class 8.8
More information670 SCREWED FIX-IT KITS. Page WOOD SCREWS DOWEL PINS DOWELS STUDDING. Page Pages GROUP GROUP 651 EXTRACTOR GROUP 635 GROUP 650
Page...........556-559 635 WOOD SCREWS 650 DOWEL PINS 651 EXTRACTOR DOWELS 670 SCREWED STUDDING Page.......................560 Page.......................561 Page.......................561 Pages......................561
More informationVARVIT USA, LLC SEQUOIA DRIVE SUITE 101 AURORA,ILLINOIS USA PRODUCT CATALOG
PRODUCT CATALOG With over 50 years of manufacturing experience, The Vescovini Group is one of the major players in the European market producing high quality fasteners, screws, nuts, studs, wheel bolts
More informationA leading supplier & manufacturer of precision engineered components
A leading supplier & manufacturer of precision engineered components T: +44 (0) 1536 461140 F: +44 (0) 1536 461662 E: sales@technifast.co.uk W: www.technifast.co.uk T: +44 (0) 1536 461140 F: +44 (0) 1536
More informationMETRIC FASTENERS 1520 METRIC FASTENERS
1520 METRIC FASTENERS METRIC FASTENERS A number of American National Standards covering metric bolts, screws, nuts, and washers have been established in cooperation with the Department of Defense in such
More informationBOLTS AND NUTS Square Bolts( Table 1 ) Hex Nuts ( Table 7 ) Heavy Hex Nuts (Table 7) Heavy Hex Structural Bolts ( Table 2 )
BOLTS AND NUTS 1493 An externally threaded fastener that must be assembled with a nut to perform its intended service is a bolt. (Example: heavy hex structural bolt.) An externally threaded fastener that
More informationMachine threads are usually functional with internal-threaded workpieces, such as nuts
2010 Screws Machine Threads. i macine thread Machine threads are usually functional with internal-threaded workpieces, such as nuts Wood Metal Sheet Threads. i A type thread AB type thread 17 type thread
More informationFASTENERS. Fasteners. Steel fasteners. Hexagon socket screws. Steel fasteners MC6S
Steel fasteners 21 FASTENERS Steel fasteners Hexagon socket s MC6S Hexagon socket head cap Din 912. (ISO 4762). * Fully threaded. 100 101 102 12.9 Uncoated 8.8 Uncoated 8.8 BZP Blanc Zink plated Dim mm
More informationEngineering Design Representation. Use of 2D drawing format: Typical Design Annotation. Standardization. Extracted drawings. General dimensions
Engineering Design Representation Some elements of design representation not easily conveyed through model alone. Many are notational in nature. Examples are: Thread specifications Surface finishes Surface
More informationUNIT 9b: SCREW FASTENERS Introduction Functions Screw Features Elements Terms of a Thread Profile
UNIT 9b: SCREW FASTENERS Introduction A mechanical screw is a cylinder or cone that has a helical ridge called a thread. A helix has one or more turns, so a screw can have several turns. If the helix is
More informationSockets. Dimensions; Mechanical & Performance Requirements. Socket Head Cap Screws Body & Grip Lengths - Socket Cap Screws...
imensions; Mechanical & Performance Requirements Socket Head Cap Screws... 2-4 Body & Grip Lengths - Socket Cap Screws... 5-6 Low Head Socket Cap Screws... 7 Button Head Socket Cap Screws... 8 Flat Head
More informationFastener Type Chart. Fastener Categories. Sheet Metal Screws Fully threaded screws with a point for use in sheet metal. Abbreviated SMS.
Fastener Categories Wood Screws Machine Screws Thread Cutting Machine Screws Screws with a smooth shank and tapered point for use in wood. Abbreviated WS. Screws with threads for use with a nut or tapped
More informationThis is trial version
Guiding components, Locating units, Dowel pins, Screws, Springs, Dateand recycling inserts, Retaining rings, Lifting devices, Clamping-systems, Thermal insulating sheets, Locating rings 1.01 1.02 Ordering
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB/T5782-2016 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 21.060.10 J 13 GB/T 6171-2016 Replacing
More informationFastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength
Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened
More informationWHO ARE WE? OUR AIMS OUR PRODUCTS QUALITY MANAGEMENT SYSTEM
CATALOGUE 2007/2008 SPECIAL TURNED PARTS PINS KEYS SPACERS INSERTS WHO ARE WE? Technifast is a manufacturer and distributor of engineering fasteners, specialising in pins and dowels, spacers, inserts and
More informationScrews. Introduction. 1. Nuts, bolts and screws used to clamp things together. Screws are used for two purposes:
Screws Introduction Screws are used for two purposes: 1. To clamp things together. 2. To control motion. 1. Nuts, bolts and screws used to clamp things together. Nuts, bolts and screws that are used for
More informationK/D FITTINGS & FASTENERS
K/ FITTINGS & FASTENERS -1 Screws P. 162-168 -2 Connector Bolts P. 169-173 -3 K/ Fittings P. 174-177 -4 Insert Nuts P. 178-181 -5 Allen Keys P. 182-183 -6 Nails & Wall Plugs P. 184 -1 Screws 1010 Machine
More informationPrecision Manufacturing
Precision Manufacturing 216 North Main Street. Freeport, NY 11520 Phone: 888-260-7466 / Fax: 516-771-6444 sales@ondrivesus.com www.ondrivesus.com Know Linear Your Shaft Shoulder Supports Screws By Dennis
More informationDownloaded from ENGINEERING DRAWING. Time allowed : 3 hours Maximum Marks : 70
ENGINEERING DRAWING Time allowed : 3 hours Maximum Marks : 70 Note : (i) (ii) Attempt all the questions. Use both sides of the drawing sheet, if necessary. (iii) All dimensions are in millimeters. (iv)
More informationIS INTERNATIONAL STANDARD. Slotted countersunk flat head screws (common head style) - Product grade A. Vis 9 mktaux d t&e fraisee fendue -
INTERNATIONAL STANDARD IS0 2009 Third edition 1994-04-01 Slotted countersunk flat head screws (common head style) - Product grade A Vis 9 mktaux d t&e fraisee fendue - Grade A Reference number IS0 2009:1994(E)
More informationFastener Handout. Introduction: Engineering Design Representation 2. Threads 2. Local Notes (callouts) 8. Threaded Mechanical Fasteners 13
Fastener Handout Introduction: Engineering Design Representation 2 Threads 2 Effect of thread angle on strength: 3 Standardization of Threads: 4 Descriptions of the Thread Series: 4 Class fit: 5 Specification
More informationVarious other types of drilling machines are available for specialized jobs. These may be portable, bench type, multiple spindle, gang, multiple
Drilling The process of making holes is known as drilling and generally drilling machines are used to produce the holes. Drilling is an extensively used process by which blind or though holes are originated
More informationANSI ORIFICE FLANGES METAL-KOREA
METAL-KOREA ANSI ORIFICE FLANGES ORIFICE FLANGES are widely used in conjunction with orifice meters for measuring the rate of flow of liquids and gases. They are basically the same as standard welding
More informationChapter Tests and Problems
Chapter Tests and Problems Chapter 11 Fasteners and Springs Test INSTRUCTIONS Answer the questions with short, complete statements or drawings as needed. QUESTIONS Define the screw thread terms given in
More informationTechnical Specifications Guide For Fasteners
fastrite_2011_fut.ai 8/4/11 4:29:01 PM Technical Specifications Guide For Fasteners C M Y CM MY CY CMY K Important Disclaimer All of the information provided in this publication is intended for reference
More informationDrill Bits & Hole Saws
F o r P Drill Bits & Hole Saws r o f e s s i o n a l s. Klein drill bits provide accuracy and consistency for professionals. Made of top-of-the-line materials for longer-lasting performance, Klein drill
More informationOUR QUALITY POLICY VISION MISSION
AUSTENITE FASTENERS PVT.LTD. A unique name in fasteners line has come long way since its taking over Krishna Engineering Company which was established in 1999. The company has it is manufacturing plant
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T819.
Translated English of Chinese Standard: GB/T819.2-2016 www.chinesestandard.net Sales@ChineseStandard.net NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB ICS 21.060.10 J 13 Replacing GB/T 819.2-1997
More information15. Spare part list. Typing. Fabrikationsnr.: Type no.: Prod. no.: Prod. nr.: Ballart nr.: Årgang: Max. arb. tryk: Year: Max.
15. Spare part list Typing. Type no.: Ballart nr.: Fabrikationsnr.: Prod. no.: Prod. nr.: Årgang: Year: Jahr: Max. arb. tryk: Max. pressure: Max. Druck: Egenvægt: Own weight: Eigengewicht: Spænding: Voltage:
More informationLimited Warranty And Exclusive Remedy
Limited Warranty And Exclusive Remedy THE WORLD LEADER Deepak Fasteners Ltd., through its Unbrako Division and associated companies, warrants that these products conform to industry standards specified
More informationFasteners. Bolts. NAPA FastTrack Counter Sales Training Fasteners Page 1. Figure 1. Typical Measurements for a Bolt or Hex Head Cap Screw
Fasteners Many types and sizes of fasteners are used in the automotive industry. Each fastener is designed for a specific purpose and condition. One of the most commonly used type of fastener is the threaded
More information1/2/2016. Lecture Slides. Screws, Fasteners, and the Design of Nonpermanent Joints. Reasons for Non-permanent Fasteners
Lecture Slides Screws, Fasteners, and the Design of Nonpermanent Joints Reasons for Non-permanent Fasteners Field assembly Disassembly Maintenance Adjustment 1 Introduction There are two distinct uses
More information01 FASTENERS JULY FASTENERS 1
01 FASTENERS 4 Bolts 22 Socket Screws 30 Nuts 39 Washers 53 Screws 72 Threaded Rods & Studs 73 Rivets, Rivnuts & Accessories 82 Retaining Rings 84 Pins, Links, & Sleeves 91 Key Stock & Assortments 90 Anchors
More informationObsolete fastener specialist
Obsolete fastener specialist CLASSIC FASTENERS was established circa 1988 to supply 'obsolete' and just plain hard to get fasteners to restorers of automobiles and motorcycles via a mail order service.
More informationObsolete fastener specialist
Obsolete fastener specialist CLASSIC FASTENERS was established circa 1988 to supply 'obsolete' and just plain hard to get fasteners to restorers of automobiles and motorcycles via a mail order service.
More informationTECH SHEET PEM - REF / AXIAL THREAD CLEARANCE. SUBJECT: Method for providing adequate axial thread clearance
SUBJECT: Method for providing adequate axial thread clearance In our long history of working with customers in the application of our self-clinching nuts, PennEngineering has seen numerous instances of
More informationENGINEERING GRAPHICS
ENGINEERING GRAPHICS Course Structure Parts/Units Topics Marks Unit - I Isometric Projection of Solids 25 Machine Drawing 45 Part A. Drawing of Machine Parts Unit - II Part B. Assembly Drawing and Dis-assembly
More informationE-Z LOK Products are available from MARYLAND METRICS P.O. Box 261 MD USA
E-Z LOK Products are available from MARYLAND METRICS P.O. Box 261 MD 21117 USA phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com
More informationISO INTERNATIONAL STANDARD. Vis a f&e hexagonale partiellement filetees - Grades A er B. Third edition
NTERNATONAL STANDARD SO 401 4 Third edition 1999-09-01 Vis a f&e hexagonale partiellement filetees - Grades A er B Reference number SO 4014:1999(E) SO 401 4:1999(E) Foreword SO (the nternational Organization
More informationIF YOU DON T SEE IT HERE
www.smithfast.com Drills & Taps & Bits Screws Cotter Drilling Bolts / Hex Capscrews Lag Carraige Hitch Grade 8 Machine Grade Elevator 5 Sheet Spring Metal Roll Grade Eye 2 Square Taper Head set A325 Hex
More informationEXPLANATORY NOTES TO THE COMBINED NOMENCLATURE. Example
EXPLANATORY NOTES TO THE COMBINED NOMENCLATURE Example EN C 137/296 Official Journal of the European Union 6.5.2011 7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter-pins, washers
More informationFastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength
Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened
More informationENGINEERING GRAPHICS
ENGINEERING GRAPHICS Time allowed : 3 hours Maximum Marks : 70 Note : (ii) Attempt all the questions. Use both sides of the drawing sheet, if necessary. (iii) All dimensions are in millimetres. (iv) Missing
More informationISO INTERNATIONAL STANDARD. Tapping screw and washer assemblies with plain washers. Vis à tôle à rondelle plate imperdable
INTERNATIONAL STANDARD ISO 10510 Second edition 2011-04-01 Tapping screw and washer assemblies with plain washers Vis à tôle à rondelle plate imperdable Reference number ISO 10510:2011(E) ISO 2011 ISO
More information8100/ The Manual of Fastening Technology. 5 th edition
8100/08.02 The Manual of Fastening Technology 5 th edition 2 Introduction Dealing with the complex field of fastening technology every day means there are always questions to answer that go beyond the
More informationFlooring Nails 6-D Flooring Nails $3.40 / 1# 6-D Flooring Nails $14.50 / 5# 8-D Flooring Nails $3.40 / 1# 8-D Flooring Nails $14.
Nails Nails Drywall Screws Common Nails 4D Common Nails $3.85 / 1# 6D Common Nails $3.00 / 1# 6D Common Nails $74.25 / 50# 8D Common Nails $3.00 / 1# 8D Common Nails $74.25 / 50# 10D Common Nails $3.00
More informationBolts Carriage Elevator Eye Hex Shoulder Specials Square Head Step. Drills, Taps, & Bits. Hex Capscrews Grade 8 Grade 5 Grade 2 A325 A490 Specials
AU-VE-CO Bolts Carriage Elevator Eye Hex Shoulder Specials Square Head Step Concrete Anchoring Adhesives Anchor Bolts Drop Ins Wedge Pins Cotter Dowel Hitch Spring Roll Taper Pipe Fittings Power Coil EZ
More informationMachine Drawing MEC-304. Dr. Shankar Sehgal Asst. Professor in Mech. Engg. UIET, Panjab University, Chandigarh
Machine Drawing MEC-304 Dr. Shankar Sehgal Asst. Professor in Mech. Engg. UIET, Panjab University, Chandigarh Standard Abbreviations Standard Abbreviations Standard Abbreviations Standard Abbreviations
More informationMachine Screws, Tapping Screws, and Metallic Drive Screws (Inch Series)
ASME B18.6.3-2010 [Revision and Consolidation of ASME B18.6.3-2003 (R2008) and B18.6.4-2009] Machine Screws, Tapping Screws, and Metallic Drive Screws (Inch Series) A N A M E R I C A N N A T I O N A L
More informationTYPICAL STANDOFF GLASS RAIL ELEVATION TYPICAL SECTION RS0B20 WITH RECTANGULAR BACK PLATE TYPICAL STAIRS
Revisions By: CRL SRS STANDOFF RAILING SYSTEM CRL GLASS RAIL S RS0B20 w/ RECTANGULAR BACK PLATE CRL'S GLASS RAIL S CAN BE USED FOR MOUNTING GLASS PANELS UP TO 3/4" (19 MM) IN THICKNESS. THE 4" X 8" (102
More informationISO INTERNATIONAL STANDARD. Hexalobular socket cheese head screws. Vis à métaux à tête cylindrique basse à six lobes internes
INTERNATIONAL STANDARD ISO 14580 First edition 2001-09-01 Hexalobular socket cheese head screws Vis à métaux à tête cylindrique basse à six lobes internes Reference number ISO 14580:2001(E) ISO 2001 PDF
More informationQuestion Bank Technical Drawing Metal
Question Bank Technical Drawing Metal Table of Contents Question Bank Technical Drawing Metal...1 ASSEMBLY DRAWINGS & DETAILS...1 READING OF DRAWINGS...38 VIEWS...61 MACHINE ELEMENTS...87 i ii Question
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 7051 Second edition 2011-08-01 Cross-recessed raised countersunk (oval) head tapping screws Vis à tôle à tête fraisée bombée à empreinte cruciforme Reference number ISO 7051:2011(E)
More informationSpecial Thumb Screw Order Form
Special Thumb Screw Order Form QUOTE FOR: ORDER FOR: Name: Company: Address: QUANTITY: Phone #: City: State: Zip: Email Address: FILL IN YOUR DIMENSIONS write directly over light blue type* write clearly
More informationTAPPING SCREWS 1-1 TAPPING SCREWS PHILLIPS OVAL. 1 General Fasteners HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE
TAPPING SCREWS TAPPING SCREWS PHILLIPS OVAL HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE #4 x 3/8"... REG... 110001 #4 x 1/2"... REG... 105030... 110002 #4 x 5/8"... REG... 1 10003 #4 x 3/4"... REG...
More informationTHE GATE COACHAll Rights Reserved 28, Jia Sarai N.Delhi ,-9998
1 P a g e 1 DESIGN AGAINST STATIC AND FLUCTUATING LOADS 2 SHAFT, KEYS AND COUPLINGS CONTENTS Introduction 6 Factor of safety 6 Stress concentration 7 Stress concentration factors 8 Reduction of stress
More informationEngineering Guide Inch & Metric
Engineering Guide Inch & Metric A comprehensive catalog of UNBRAKO socket screws and related products In this catalog you will find complete information about UNBRAKO socket screws and such related products
More informationBalaji THE COMPANY MISSION
82, GANGOTRI INDUSTRIAL ESTATE, OPP. PANCHRATNA ESTATE, NR. RAMOL OVER BRIDGE, VATVA-382445.(GUJARAT), INDIA. Website : www.balajifasteners.co.in E-mail : info@balajifasteners.co.in OUR QUALITY POLICY
More informationKerkau Manufacturing. B16.5 Flange Book
Kerkau Manufacturing B16.5 Flange Book TABLE OF CONTENTS Revision 1 Title Page Table of Contents Tolerance Page Permissible Imperfections Dimensions of Flange Facings (all pressure rating classes) Dimensions
More informationBLACK OXIDE & BLACK ZINC FASTENERS INCLUDING STEEL & STAINLESS INCH & METRIC
BLACK OXIDE & BLACK ZINC FASTENERS INCLUDING STEEL & STAINLESS INCH & METRIC Black Oxide MACHINE SCREWS (Stainless) 100º 82º MACHINE SCREWS & SEMS (Steel) Combination Pan 100 82º Phillips Fillister Phillips
More informationMachine Screws, Tapping Screws, and Metallic Drive Screws (Inch Series)
ASME B18.6.3-2013 (Revision of ASME B18.6.3-2010) Machine Screws, Tapping Screws, and Metallic Drive Screws (Inch Series) AN AMERICAN NATIONAL STANDARD ASME B18.6.3-2013 (Revision of ASME B18.6.3-2010)
More informationENGINEERING GRAPHICS
ENGINEERING GRAPHICS CLASS - XII (046) DESIGN OF THE QUESTION PAPER Time : 3 Hrs Max. Marks : 70 The weightage of the distribution of marks over different contents of the question paper shall be as follows:
More informationICS CUTTING TOOLS, INC 511 Main Street Casco, WI USA (920) Fax (920)
ICS CUTTING TOOLS, INC 511 Main Street Casco, WI 54205-0125 USA (920) 837-2526 Fax (920) 837-2530 www.icscuttingtools.com info@icscuttingtools.com COMBINED DRILL & COUNTERSINKS COBALT PLAIN TYPE...5 BELL
More informationISO INTERNATIONAL STANDARD. Cross recessed raised countersunk head drilling screws with tapping screw thread
INTERNATIONAL STANDARD ISO 15483 First edition 1999-08-01 Cross recessed raised countersunk head drilling screws with tapping screw thread Vis autoperceuses à tête fraisée bombée à empreinte cruciforme,
More informationHolemaking Products & Accessories
Holemaking Products & Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy
More informationISO INTERNATIONAL STANDARD. Tolerances for fasteners Part 1: Bolts, screws, studs and nuts Product grades A, B and C
INTERNATIONAL STANDARD ISO 4759-1 Second edition 2000-11-15 Tolerances for fasteners Part 1: Bolts, screws, studs and nuts Product grades A, B and C Tolérances des éléments de fixation Partie 1: Vis, goujons
More informationIIHS Side Impact Outrigger
IIHS Side Impact Outrigger Assembly Procedure Base Assembly (14.3 lbs) The base assembly consists of a ¼ thick steel plate, a ¼ thick piece of polyethylene, and mounting fixtures for the upper and lower
More informationFastener Solutions. USA: 866.LAWSON4U ( ) Canada: lawsonproducts.com
USA: 866.LAWSON4U (866.529.7664) Canada: 800.563.1717 lawsonproducts.com Fastener Solutions 2017 Lawson Products, Inc. All rights reserved. Printed in USA. E686V3 (1/17) LAWSON'S FASTENER SOLUTIONS Tru-Torq
More informationHigh Performance HSSE Color Ring Tap Speeds
Torque Cut High Performance HSSE Color Ring Taps RedLine Torque Cut High Performance Taps give you greater performance when tapping Steel Alloys, Stainless Steels, Titanium and a variety of other Steels
More informationStriking with the cheek of the hammer instead of the face. Using the claws of the hammer for work that is best done with a wrecking bar.
The most important consideration is the squareness of the hammer head to the nail at the moment of impact. Sometimes in order to get a nail started, it is convenient to grip the handle closer to the head.
More informationSwivel Hoist Ring Page 142
Swivel Hoist Ring Page 142 Hoist Rings Color coded to distinguish between UNC (Red) and Metric (Silver) thread types HR-125 M HR-125 Available in UNC and Metric thread sizes. UNC threads available in sizes
More informationISO INTERNATIONAL STANDARD. Cross recessed pan head drilling screws with tapping screw thread
INTERNATIONAL STANDARD ISO 15481 First edition 1999-08-01 Cross recessed pan head drilling screws with tapping screw thread Vis autoperceuses à tête cylindrique bombée large à empreinte cruciforme, avec
More informationNon Standardised Screws/Bolts
Non andardised Screws/Bolts Metric Screws and Bolts hexagon head bolts with flange acc. to MBN 5 (article 5).9 threaded bolts and nuts acc. to ANSI andard (Å DIN 976) 5.6. ASTM AISI BS PTFE AISI BS ASTM
More informationSPECIFICATION FOR HIGH STRENGTH STRUCTURAL BOLTS
UDC 621.882.211 [669.14.018.291] IS : 3757-1985 (Reaffirmed 2003) Edition 3.2 (1989-07) Indian Standard SPECIFICATION FOR HIGH STRENGTH STRUCTURAL BOLTS ( Second Revision ) (Incorporating Amendment Nos.
More informationMTS-ACB. RENOGY Photovoltaic Module Adjustable Curved Bracket E Philadelphia St, Ontario, CA Version: 1.
MTS-ACB RENOGY Photovoltaic Module Adjustable Curved Bracket 2775 E Philadelphia St, Ontario, CA 91761 1-800-330-8678 1 Version: 1.0 Important Safety Instructions Please save these instructions. This manual
More informationPARTS LIST. Clarke CL500M 6 spd. Metal Lathe Part Number: HT HT HT
PARTS LIST Clarke CL500M 6 spd. Metal Lathe Part Number: - 7610300 Quantity Description Part Number 1 Countersunk Hd, screw m5x14 HT3000101 1 Retaining Ring, 28 HT3000102 1 Bevel Gear HT3000103 1 Washer
More informationENGINEERING GRAPHICS CLASS - XII (046) DESIGN OF THE QUESTION PAPER
ENGINEERING GRAPHICS CLASS - XII (046) DESIGN OF THE QUESTION PAPER Time : 3 Hrs Max. Marks : 70 The weightage of the distribution of marks over different contents of the question paper shall be as follows:
More informationFasteners. Metal Fasteners, Joining, and Adhesives. Bolts. Metal Fasteners, Joining, and Adhesives
Metal Fasteners, Joining, and Adhesives Fasteners Metal assemblies are often held together with fasteners, hardware devices that mechanically join or affix two or more objects together. Assembling with
More informationACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS SKODA LIVE CENTERS SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two
More informationACCESSORIES CATALOG. SKODA LIVE CENTERS BORING AND FACING HEADS
ACCESSORIES CATALOG BORING AND FACING HEADS SKODA LIVE CENTERS www.sowatool.com SKODA LIVE CENTERS Skoda Heavy Duty Live Centers - CSN 4334/CSN 4334M Features The rotating spindle is extended right through
More informationof shoulderscrew T MORE? his code image u s fre
MECHANICAL Know your shoulder screws The basics of shoulderscrew grades, dimensions, materials, and options can help designers get the best proc uct for their appiications. SIP -,, Shoulder screws, also
More informationT Pac2 standard for prevailing torque threadlocker Dri-Loc Plastic. Introduction. Contents. 1 Scope and field of application
T-26728 Pac2 standard for prevailing torque threadlocker Dri-Loc Plastic Test, material and performance specifications Introduction This standard conforms where applicable to DIN 267 part 28, DIN 267 part
More informationAIRCRAFT HARDWARE What You Need To Know By Ron Alexander
Page 1 of 6 AIRCRAFT CONSTRUCTION An Article Series by Ron Alexander AIRCRAFT HARDWARE What You Need To Know By Ron Alexander The quality of our workmanship in building an airplane is very important. We
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 10511 Third edition 2012-12-15 Prevailing torque type hexagon thin nuts (with non-metallic insert) Écrous hexagonaux bas autofreinés (à anneau non métallique) Reference number
More informationSELF-TAPPING SCREW FIXINGS
Denomination: Reference: FT ROS-en Date: 15/12/15 Revision: 3 Page: 1 of 14 T81 AUE T82 TCP T83 TFI CHARACTERISTICS ISO 1478 self-tapping thread. Require pre-drilling. Point Type F. Wide variety of head
More information3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
More informationPull-down clamps. No Low height clamping jaws, model Bulle
Pull-down clamps The wedge action of clamping jaws is the characteristic feature of these pull down clamps. It causes the pull down effect, which presses the workpiece against both, stop and machine table.
More informationDRILL BITS & THREAD REPAIR DRILL BITS
DRILL BITS DRILL BITS Designed for drilling soft metal mild steel wood plastic and PVC Manufactured from industrial high speed steel surface treated for high performance and long life 29 piece set includes
More information