Valid until March 31, Inch Version OFFERS SPECIAL INNOVATION 2019 INTELLIGENTLY DUSTRY 4.0 MACHINING.

Transcription

1 Valid until March, 09 Inch Version OFFER PECIAL INNOVATION 09 MACHINING INTELLIGENTLY DUTRY.0

2 INNOVATION 09 Tangential Cost Effective Insert with 8 Cutting Edges for 900 houlder Milling 8 The LOGIQ-8-TANG tangential 8 cutting edged insert for 90 rough milling features a huge wiper suitable for steel and cast-iron applications. Firm placement of the insert due to its dovetail shape ensures high feed and durability when working under extreme cutting conditions. The tangential mounting of the insert reduces forces on the insert screw and eliminates shearing forces. 7 Tangential Advantage Large Body Core Performs 90 houlder Dovetail 8 Cutting Edges 0 T890 LNHT Mix & Match Grade or Geometry by Pack ize 50% Use Promo Code: LQ on the Corresponding Face Mill Cutter, (T890HT FLN) up to 5" Valid until March, 09

3 DHUB OMN T890HT FLN-R 90 Face Mills Carrying T890 LN.T Tangentially Clamped Inserts with 8 Cutting Edges T890HT FLND R T890HT FLND R T890HT FLND R T890HT FLND R T890HT FLND R T890HT FLND R T890HT FLND R T890HT FLND R T890HT FLND R T890HT FLND R T890HT FLND R T890HT FLND R T890HT FLND R T890HT FLND R T890HT FLND R T890HT FLND R () CT ONM DHUB Arbor WT() A A A A A A A A A B B B B B B B Number of inserts Item weight Fig. Fig. T890 LN.T 06 Tangentially Clamped Inserts with 8 Cutting Edges INL LE W Fig CHW W 500 INL 80 LE Recommended Machining Data Hard 85 T890 LNHT 06PNTR T890 LNAT 06PN-W Tough /CHWx5 ap (inch) A wiper insert (." long), cutting edges, for finishing only 50% ADDITIONAL DOUNT fz (inch/t)

4 INNOVATION 09 The mallest Helical Indexable Multi-Toothed Endmill for 90º houlder Milling High Positive Rake Large Diameter Core Performs 90 houlder Cost Effective Insert 0 HM90 TPKT 05 Mix & Match grade or geometry by pack size Use Promo Code: LQ the Corresponding Endmill Cutter (HM90 ETP) up to 0.65"" Free of Charge 0 X Magnified HM90 TPKT 05 Helical Cutting Edges Valid until March, 09

5 HM90 ETP Endmills Carrying HM90 TPKT 050 Triangular Inserts with Helical Cutting Edges ONM HM90 ETPD.50-0-C.50-05C HM90 ETPD.6-0-C.6-05C LH CT LH ONM hank() RMPX() C C.5.5 Lbs.7.5 Tightening torque. lbf*in Number of inserts () C-Cylindrical () Maximum ramping angle DRV THZM ONM HM90 ETP-MM Endmills with a MULTI-MATER Threaded Adaptation Carrying HM90 TPKT Triangular Inserts HM90 ETPD.50-0-MMT08-05 HM90 ETPD.6-0-MMT CT LF LF ONM THZM T08 T0 DRV() RMPX() WT() Tightening torque. lbf*in Number of inserts () Key flat size () Ramping angle maximum () Item weight HM90 TPKT 050 B L LE B 808 Tough 80 HM90 TPCT 050PDR HM90 TPKT 050PDR L Hard Recommended Machining Data 80 Triangular Inserts with Helical Cutting Edges for 90 houlder Accuracy (inch) (inch/t) ap fz OFFER PECIAL

6 NANMILL INNOVATION 09 NANO ENDMILL mallest Indexable Insert Combined with mall Diameter Multi-Toothed Endmill for 90 houlder Milling Extra Positive Cutting Edge Very trong and Durable Insert New Generation Insert Performs 90 houlder 5 X Magnified 0 HM90 TPKR 0 Mix & Match grade or geometry by pack size 50% Use Promo Code: LQ on the Corresponding Endmill Cutter (HM90 ETP -0) up to 0.8" 0 HM90 TPKR 0 Mix & Match grade or geometry by pack size Use Promo Code: LQ Corresponding Endmill Cutter, (HM90 ETP -0) up to 0.8" Free of Charge 6 Valid until March, 09

7 HM90 ETP-0 90 mall Diameter Endmills Carrying HM90 TPKR 00 Triangular Inserts with Helical Cutting Edges LH ONM CT LH ONM hank () RMPX () WT () HM90 ETP D.--C C.0.05 HM90 ETP D.8--C C.6.09 Tightening torque lbfx*in Number of inserts () C-Cylindrical () Ramping angle maximum () Item weight DRV HM90 ETP-MM-0 90 Endmills with a MULTI-MATER Threaded Adaptation Carrying HM90 LF TPKR Triangular Inserts CT LF ONM THZM DRV () RMPX () WT () HM90 ETP D.--MMT T HM90 ETP D.8--MMT T Tightening torque lbf*in. Number of inserts () Key flat size () Ramping angle maximum () Item weight THZM ONM HM90 TPKR 00 Triangular Miniature Inserts with Helical Cutting Edges for 90 houlders LE L B Recommended Machining Data a p f z L LE B (inch) (inch/t) HM90 TPKR 00-PCTR PECIAL OFFER 7

8 INNOVATION 09 Twisted hape Insert for High Feed Milling Guarantees Higher Productivity High Feed Milling Large Body Core Ensures tability and Rigidity High Positive Rake Angle Double ided Insert Unique Insert hape 0 FFX XNMU 0 Mix & Match grade or geometry by pack size 50% Use Promo Code: LQ9 on the Corresponding Endmill Cutter (FFX ED -0) up to.5" 0 FFX XNMU 0 Mix & Match grade or geometry by pack size 50% Use Promo Code: LQ0 on the Corresponding Face Mill Cutter, (FFX FD -0) up to.5" 8 Valid until March, 09

9 INNOVATION 09 0 FFX XNMU 0 Mix & Match grade or geometry by pack size Use Promo Code: LQ Corresponding Endmill Cutter (FFX ED -0) up to.5" Free of Charge 60 FFX XNMU 0 Mix & Match grade or geometry by pack size Use Promo Code: LQ Corresponding Face Mill Cutter, (FFX FD -0).5" Free of Charge 9 OFFER PECIAL Valid until March, 09

10 LH FFX ED Endmills Carrying mall Doubleided "Bone hape" Inserts with Cutting Edges for Fast Feed Milling ONM X 7 FFX ED W FFX ED W0.6-0 FFX ED W FFX ED W FFX ED W FFX ED W.00-0 FFX ED W.00-0 FFX ED W.00-0 FFX ED W.5-0 X CT LH ONM hank() RMPX() W W W W W W W W W WT() Radius for programming.07" Number of inserts () W - Weldon () Ramping angle maximum () Item weight Endmills with MULTI-MATER Adaptation Carrying mall "Bone hape" Inserts with Cutting Edges for Fast Feed Milling FFX ED6/.6--MMT0-0 THZM ONM X FFX ED-MM 7 DRV LF X.60.9 CT THZM.0 T0 LF RMPX() ONM DRV() WT().05 Radius for programming.07" Number of inserts () Ramping angle maximum () Key flat size () Item weight LF FFX ED-M X Endmills with FLEXFIT Adaptation Carrying mall "Bone hape" Inserts with Cutting Edges for Fast Feed Milling FFX ED0/.78--M0-0 FFX ED5/.98--M-0 FFX ED/.6-5-M6-0 FFX ED5/.8-5-M6-0 X CT THZM ONM KAPR THZM M0 M M6 M6 DRV LF RMPX() ONM DRV() Radius for programming.07" Number of inserts () Ramping angle maximum () Key flat size () Item weight OFFER PECIAL 0 WT()

11 DHUB ONM FFX FD Face Mills Carrying mall "Bone hape" Inserts with Cutting Edges for Fast Feed Milling 7 X FFX FD X CT DHUB ONM RMPX() WT() Radius for programming.07" Number of inserts () Ramping angle maximum () Item weight FFX XNMU mall "Bone hape" Inserts with Cutting Edges for Fast Feed Milling INL W W Recommended Machining Data Hard INL 88 FFX XNMU 000HP FFX XNMU 000T Tough 580 (inch) ap fz (inch/t) HP- for austenitic stainless steel and high temperature alloys T- for steel, ferritic and martensitic stainless steel, cast iron and hardened steel OFFER PECIAL

12 INNOVATION 09 mallest Indexable Insert Combined with mall Diameter Multi-Toothed Endmill for High Feed and Productivity High Feed Milling Very trong and Durable Insert High Ramp Down Angle Easy Chip Evacuation 0 X Magnified 0 FFT TXMT 0 Mix & Match grade or geometry by pack size 50% Use Promo Code: LQ on the Corresponding Endmill Cutter (FFT EFM -0) up to 0.8" 0 FFT TXMT 0 Mix & Match grade or geometry by pack size Use Promo Code: LQ Corresponding Endmill Cutter, (FFT EFM -0) up to 0.8" Free of Charge Valid until March, 09

13 LF FFT EFM-MM 0 mall Diameter Endmills with a MULTI-MATER Threaded Adaptation Carrying Triangular Inserts for Fast Feed Milling THZM ONM X X FFT EFMD08/.-MMT FFT EFMD0/.9-MMT CT LF ONM THZM DRV() RMPX().99.8 T05 T WT() Radius for programing.0 inch Number of inserts () Key flat size () Ramping angle maximum () Item weight FFT TXMT 0 Triangular Miniature Inserts for Fast Feed Machining at mall Depth of Cut INL Recommended Machining Data FFT TXMT 0005T INL ap fz (inch) (inch/t) OFFER PECIAL

14 INNOVATION 09 mall Diameter Multi-Toothed Endmill for High Feed and Productivity High Feed Milling High Positive Rake Angle High Productivity Through-Tool Coolant 0 X Magnified 0 FFT WXMT 0 Mix & Match grade or geometry by pack size 50% Use Promo Code: LQ5 on the Corresponding Endmill Cutter (FFT EFM -0) up to 0.65" 0 FFT WXMT 0 Mix & Match grade or geometry by pack size Use Promo Code: LQ6 Corresponding Endmill Cutter, (FFT EFM -0) up to 0.65" Free of Charge Valid until March, 09

15 A FFT EFM-0 LH Endmills Carrying ingle-ided mall Trigon Inserts for Fast Feed Milling X 7 FFT EFMD.8--.0C.8-0 FFT EFMD C.50-0 FFT EFMD C.6-0 ONM A X CT LH ONM hank() RMPX() C C C WT Radius for programming.0" Number of inserts () W - Weldon () Ramping angle maximum LF FFT EFM-MM 0 Endmills with a MULTI-MATER Threaded Adaptation Carrying ingle-ided mall Trigon Inserts for Fast Feed Milling X THZM ONM DRV X FFT EFMD0/.9-MMT FFT EFMD/.7-MMT FFT EFMD6/.6-MMT CT LF ONM THZM T06 T08 T DRV() RMPX() WT() Radius for programming.0" Number of inserts () Key flat size () Ramping angle maximum () Item weight FFT WXMT 0 ingle-ided mall Trigon Inserts for Fast Feed Milling Recommended Machining Data 808 Hard 80 FFT WXMT 0006T Tough ap (inch) fz (inch/t) OFFER PECIAL 5

16 INDEXABLE INNOVATION 09 HEAD New Long Flute Multi-Master Heads Length Ratio.5xD Ease of Use Different Types of Materials Roughing emi-finishing & Finishing Cost Effective Insert Mix & Match Grade or Geometry by Pack ize New Multi-Master Heads.5XD 5% Use Promo Code: LQ7 6 Mix & Match Grade or Geometry by Pack ize New Multi-Master Heads.5XD 0% Use Promo Code: LQ8 No etup Time 6 Valid until March, 09

17 MM EC-CF-Z7/9-.5xD Interchangeable 7, 9 Flute olid Carbide Endmill Heads 6 Helix with.5xd Flute Lengths e8 LF THZM FHA ONM Recommended Machining Data f z NOF THZM ONM LF FHA RMPX () (inch/t) MM ECH7R05-7T T MM EC75H56R05-7T T MM EC500H75R05-7T T MM EC65H9R0-9T T MM EC750HR0-9T T MM EC.0H50R0-9T T Do not apply lubricant to the threaded connection. Number of flutes () Ramping angle maximum 908 THZM MM EC-CF-Z-.5xD Interchangeable olid Carbide Endmill Heads with.5xd Flute Lengths for Chatter Free Roughing and Finishing e8 LF FHA ONM Recommended Machining Data f z NOF THZM ONM LF FHA (inch/t) MM ECH7R05CF-T T MM EC75H56R05CF-T T MM EC500H75R05CF-T T MM EC65H9R05CF-T T MM EC750HR0CF-T T MM EC.0H50R0CF-T T Do not apply lubricant to the threaded connection. Number of flutes 908 MM ER-.5xD Interchangeable olid Carbide Rough Milling Heads with.5xd Flute Lengths for High Metal Removal Rates CHW e9 THZM ONM LF FHA Recommended Machining Data f z NOF CHW THZM ONM LF FHA RMPX () (inch/t) MM ERB7-T T MM ER75B56-T T MM ER500B75-T T MM ER65B9-5T T MM ER750B-6T T MM ER.0B50-6T T Do not apply lubricant to the threaded connection. Number of flutes () Ramping angle maximum 908 7

18 INNOVATION 09 The UMOCHAM drill line comprises a revolutionary clamping system for precise machining and high productivity. The wide variety of exchangeable heads provides solutions for drilling all kinds of materials and all types of applications. The UMOCHAM is the most productive profitable solution for the holemaking industry. Use Promo Code: LQ9 Use Promo Code: LQ0 6 P/K/M Mix & Match grade or geometry by pack size ( mm only, of the same size) + Corresponding Drill Body 0% on the whole package-tool and inserts, up to 8XD 0 P/K/M Mix & Match grade or geometry by pack size ( mm only, of the same size) Corresponding Drill Body, (N/N) up to 8XD Free of Charge 8 Valid until March, 09

19 More flutes in relation to cutting diameter, spiral flutes reduce cutting forces harp ground helical cutting edges Low cutting forces hort machining time Thread diameter accuracy adjustment Bottom thread relief not required No problem with broken taps Thread milling next to bottom of blind hole Excellent and controlled thread surface finish One tool is suitable for various thread milling profiles Easy and efficient machining for thread milling on CNC milling centers Use Promo Code: LQ Use Promo Code: LQ olid Carbide Mill Thread Assorted Tools 5% olid Carbide Mill Thread Assorted Tools 5% 9 Valid until March, 09

20 INNOVATION 09 Double ided Insert with Positive Cutting Edges AR introduces new double-sided inserts with unique cutting edges as an advantageous alternative to the conventional IO standard positive inserts with cutting edges. Medium Finish Double ided Dovetail Positive Rake Insert Insert Use Promo Code: LQ6 0 CXMG 09 Assorted Inserts 50% on the Corresponding External Holder * JHP Holders are not included Use Promo Code: LQ 0 CXMG Assorted Inserts 50% on the Corresponding External Holder * JHP Holders are not included PCLXR/L Lever Lock Tools Carrying the CXMG 80 Rhombic Inserts HF GAMF H LH H GAMP 95º 95º WF B LF B H HF LF LH WF GAMP GAMF Insert PCLXR/L 08-X CXMG 09.. PCLXR/L 0-X CXMG 09.. PCLXR/L -X CXMG.. PCLXR/L 6-X CXMG.. 0 Valid until March, 09

21 95º CXMG-FM 80 Double-ided and Double-Positive Inserts with a Positive Rake for Finishing on tainless teel and H.T.A. 95º 95º L L 806 Hard 605 CXMG 0900-FM CXMG T50-FM CXMG T508-FM Tough ap (inch) f (IPR) º CXMG-FP 80 Double-ided and DoublePositive Inserts with a Positive Rake for Finishing on Alloyed teel Recommended Machining Data º 95º L CXMG 0900-FP CXMG T50-FP CXMG T508-FP Recommended Machining Data L (inch) (IPR) f 95º CXMG-MM 80 Double-ided and DoublePositive Inserts with a Positive Rake for Medium Machining on tainless teel and H.T.A. ap 95º 95º L L 806 Hard 605 CXMG MM CXMG T508-MM CXMG T5-MM Tough CXMG-MP 80 Double-ided and Double-Positive Inserts with a Positive Rake for Medium Machining on Alloyed teel Recommended Machining Data 807 ap (inch) f (IPR) º 95º 95º L L 850 CXMG MP CXMG T508-MP CXMG T5-MP Tough Hard Recommended Machining Data 850 ap (inch) f (IPR)

22 INNOVATION 09 Pentagonal Insert with 5 Cutting Edges for Grooving & Parting Miniature Parts Next to houlder For Grooving, Parting, Turning & Threading Application For Every Type of Material Innovative Cost Effective Insert 5 PENTA 7 inserts 0 T890 LNHT Inserts of any assortment Use Promo Code: LQ5 50% 50% Additional Discount on holder onthe thecorresponding CorrespondingPCHL\R End Mill Cutter (T890HT ELN) up to 0 mm 0 PENTA 7 inserts 0 T890 LNHT Inserts of any assortment Use Promo Code: LQ6 50% Free of Charge the corresponding PCHR\L holder on the Correspondin Face Mill Cutter, (T890HT FLN) up to 5 mm Valid until March, 09

23 PENTA 7-P-R/L Pentagonal Inserts for Grooving and Parting oft Materials, Thin and Miniature Parts ±.00 CDX 0 CUTDIA CW ±.0008 Ø.67 Recommended Machining Data 008 f groove (IPR) CW CDX CUTDIA PENTA 7N05P000R/L PENTA 7N00P000R/L PENTA 7N0P000R/L PENTA 7N0P000R/L PENTA 7N050P000R/L PENTA 7N075P000R/L PENTA 7N080P000R/L PENTA 7N095P000R/L PENTA 7N00P00R/L PENTA 7N0P00R/L PENTA 7N0P00R/L PENTA 7N50P00R/L PENTA 7N57P00R/L PENTA 7N70P00R/L PENTA 7N78P00R/L PENTA 7N96P00R/L PENTA 7N00P00R/L PENTA 7NP00R/L PENTA 7N0P00R/L PENTA 7N9P00R/L PENTA 7N7P00R/L PENTA 7N50P00R/L PENTA 7N70P00R/L PENTA 7N87P00R/L PENTA 7N00P00R/L PENTA 7N8P00R/L PCHR/L-7 Tools Carrying Inserts with 5 Cutting Edges for Grooving,Parting and Recessing Next to High houlders H WF LH CWN-CWX H B CWN CWX () WF LH HBH OAH PCHR/L PCHR/L PCHR/L PCHR/L Use right-hand inserts on right-hand tools and vice versa Minimum cutting width () Maximum cutting width HBH H B OAH pare Parts PCHL R M-9 T-508/5 PCHR R M-9L T-508/5 PCHL.7-7 R M-9 T-508/5 PCHR.7-7 R M-9L T-508/5 PCHL 6-7 R M-9 T-508/5 PCHR 6-7 R M-9L T-508/5 PCHL 9-7 R M-9 T-508/5 PCHR 9-7 R M-9L T-508/5

24 Pentagonal Economical Adapters, 5 Pockets for Parting & Grooving Ease of Use High Pressure New Generation Cost Effective Coolant Insert Use Promo Code: LQ7 0 ( & mm width) TAG inserts Corresponding blade and holder Free of Charge

25 CUTDIA CNT (typx) THMPR/L D5-JHP HBL Holders with High Pressure Coolant Channels for Pentagonal WF B TANG-GRIP Adapters H HF HBH B WF CUTDIA HBL CNT THMPR/L 9-D5-JHP G/8 THMPR/L 5.-D5-JHP G/8 HF HBH H PI Max pare Parts THMPR/L D5-JHP R MX8 IO 580 BLACK T-0/5 PLG /8BP TL60 HW 5.0 CUTDIA ADMP D5 Parting and Grooving Adapters With 5 Pockets for TANG-GRIP Tangentially Clamped Inserts. CW WB CWN CWX () WB D CUTDIA Insert ADMP D TAG ADMP D TAG Minimum cutting width () Maximum cutting width D DEIGNATION THMPR/L...-D5-JHP Tmax. to Dmax. Tmax Dmax pare Parts ADMP D5-.0 ETG * ADMP D5-.0 ETG --H* * Optional, should be ordered separately 5

26 Unique Tangential Insert for High Feed Face Milling Tangential Insert For teel, Cast Iron and Exotic Materials trong Cutting Edge Up to. Ramp Down Angle 0 FF VNMT 07 Assorted Inserts 50% Use Promo Code: LQ8 on the Corresponding Face Mill Cutter (FFV D -VN07) up to " 60 FF VNMT 07 Assorted Inserts Use Promo Code: LQ9 Corresponding Face Mill Cutter, (FFV D -VN07) up to " Free of Charge 6

27 W FF VNMT 0706 Tangentially Clamped Inserts with Cutting Edges for Fast Feed Milling INL Recommended Machining Data Hard INL 85 W 88 FF VNMT 0706ZN-ER FF VNMT 0706ZN-ETR () Tough 5500 (inch) ap fz (inch/t) For side plunging, the initial cutting feed is.00 inch/t For cutting speed recommendations, see pages For general applications () Reinforced cutting edges for interrupted cut and unfavorable conditions DHUB ONM FFV-D-R-VN07 Fast Feed hell Mill Carrying Tangentially Clamped Inserts with Cutting Edges 6 X FFV D R-VN07 FFV D R-VN07 FFV D R-VN07 FFV D R-VN07 X AE CT ONM DHUB RMPX() Arbor A A B B Lbs Radius for programming.0" To generate a straight surface without cusps, the width of cut must not exceed Number of inserts () Maximum ramping angle pare Parts FFV D R-VN07 FFV D R-VN07 FFV D R-VN07 FFV D R-VN07 (a) (b) R R R R MX0.7-L.5 MX0.7-L.5 MX0.7-L.5 MX0.7-L.5 IP5(a) IP5(a) IP5(a) IP5(a) BLD BLD BLD BLD IP5/7(b) IP5/7(b) IP5/7(b) IP5/7(b) W6-T-H W6-T-H W6-T-H W6-T-H R UNF /8X B8. R UNF /X0X B8. Recommended tightening torque: 6.0 lbf*in For limiting torque, use optional BLD IP5-.8NM blade & HD -.8NM handle. 7 OFFER PECIAL

28 INNOVATION 08 Radial Profile Insert for Die & Mold and General Applications High Positive Rake Angle Innovative Insert Variety of Design Cutting Geometries TR5 TR90 TRFF TR6 Cost Effective Insert 0 TR6 TNCU 07 or TR90 TXMT 07 or 0 T890 LNHT Inserts of any assortment TRFF TXMT 07 Assorted Inserts 50% 50% Use Promo Code: LQ0 on the Corresponding End Mill Cutter on the Corresponding Endmill Cutter (T890HT ELN) up to 0 mm (TR6 ER...-07) up to.5" 0 TR6 TNCU 07 or TR90 TXMT 07 or 0TRFF T890TXMT LNHT07Assorted InsertsInserts of any assortment Use Promo Code: LQ 50% Corresponding Endmill Cutter, Additional Discount ER...-07) up toface.5"" on(tr6 the Correspondin Mill Cutter, (T890HT FLN) up to 5 mm Free of Charge 8 Valid Now - March, 09

29 INNOVATION 08 Radial Profile Insert for Die & Mold and General Applications 6 High Positive Rake Angle Innovative Insert Variety of Design Cutting Geometries Cost Effective Insert 5 0 TR6 TNCU 0 or TR90 TXMT 0 or 0 T890 LNHT Inserts of any assortment TRFF TXMT 0 or TR5 TXMT 0 Assorted Inserts Use Promo Code: LQ 50% 50% on the Corresponding End Mill Cutter on the Corresponding Endmill Cutter (T890HT ELN) up to 0 mm (TR6 ER...-0) up to.5" 0 TR6 TNCU 0 or TR90 TXMT 0 or 0 T890 LNHT Inserts of any assortment TRFF TXMT 0 or TR5 TXMT 0 Assorted Inserts Use Promo Code: LQ 50% Discount 50% Additional on the Correspondin Face Mill Cutter, (T890HT FLN) up to 5 mm on the Corresponding Face Mill Cutter, (TR6 FR...-0) up to " 9 Valid Now - March, 09

30 INNOVATION 08 Radial Profile Insert for Die & Mold and General Applications High Positive Rake Angle Innovative Insert Variety of Design Cutting Geometries Cost Effective Insert 0 TR6 TNCU 0 or TR90 TXMT 0 or 0 T890 LNHT Inserts of any assortment TRFF TXMT 0 or TR5 TXMT 0 Assorted Inserts Use Promo Code: LQ 50% Corresponding Endmill Cutter, on the Corresponding End Mill Cutter (TR6 ER...-0) up to.5" (T890HT ELN) up to 0 mm Free of Charge 0 T890 LNHT Inserts of any assortment 60 TR6 TNCU 0 or TR90 TXMT 0 or TRFF TXMT 0 or TR5 TXMT 0 Assorted Inserts Use Promo Code: LQ5 50% on the Correspondin Face Mill Cutter, Corresponding Face Mill Cutter, (T890HT FLN)up uptoto" 5 mm (TR6 FR...-0) Free of Charge 0 Valid Now - March, 09

31 TR6 TNCU/MU Double ided Inserts with ix Round Cutting Edges, Available in.097 Up to.059" Corner Radii Recommended Machining Data Hard 88 TR6 TNCU TR6 TNCU 0700 TR6 TNMU 0705 TR6 TNCU 0005 TR6 TNCU 000 TR6 TNCU 005 TR6 TNMU 005 TR6 TNCU 000 TR6 TNCU 005 TR6 TNCU 000 Tough 908 ap fz (inch) (inch/t) TR90 TXMT ingle ided Insert with Three Cutting Edges for 90 houlder and Face Milling Hard Recommended Machining Data TR90 TXMT 0700 TR90 TXMT 0008 Tough (inch) (inch/t) ap fz TRFF TXMT ingle ided Insert with Three Cutting Edges for High Feed Machining KRIN () Rg KRIN() 80 TRFF TXMT 070 TRFF TXMT 00 Tough Radius for programming Edge angle related to the wiper Hard Recommended Machining Data 808 (inch) (inch/t) ap fz

32 TR5 TXMT ingle ided Inserts with Three Cutting Edges for 5 Chamfering and Face Milling 5 Tough Hard Recommended Machining Data a p f z (inch) (inch/t) TR5 TXMT TR6 ER Multifunction Endmills that can Carry Four Different Insert Geometries TR6 TNCU TRFF TXMT TR90 TXMT TR5 TXMT X U BHTA LU LH ONM Tool shown with TR6 TNCU inserts X _ U BHTA TR6 ERD W TR6 ERD W TR6 ERD W TR6 ERD W TR6 ERD W TR6 ERD.5--.5W CT LU LU _ LU _ LU _ LH LH _ LH _ LH _ ONM TR6 ERD W TR6 ERD W TR6 ERD W TR6 ERD W TR6 ERD W TR6 ERD.5--.5W Insert MIID () () MIID _ () MIID _ (5) MIID _ Lbs TR6 ERD W TR6 TNCU 0700 TR6 TNCU 0700 TRFF TXMT 070 TR90 TXMT TR6 ERD W TR6 TNCU 0700 TR6 TNCU 0700 TRFF TXMT 070 TR90 TXMT TR6 ERD W TR6 TNCU 0700 TR6 TNCU 0700 TRFF TXMT 070 TR90 TXMT TR6 ERD W.5-07 TR6 TNCU 0700 TR6 TNCU 0700 TRFF TXMT 070 TR90 TXMT TR6 ERD W.00-0 TR6 TNCU 005 TR6 TNCU 005 TRFF TXMT 00 TR90 TXMT 0008 TR5 TXMT TR6 ERD.5--.5W.5-0 TR6 TNCU 005 TR6 TNCU 005 TRFF TXMT 00 TR90 TXMT 0008 TR5 TXMT 00.5 Note: The data refers to master inserts, for other insert radii and geometries refer to the table below Number of inserts () Master insert identification () Master insert identification () Master insert identification (5) Master insert identification PECIAL OFFER

33 TR6 ER-M Multifunction Endmills with FLEXFIT Threaded Adaptation that can Carry Four Different Insert Geometries. TR6 TNCU TRFF TXMT X THZM ONM TR90 TXMT BHTA U LF TR5 TXMT Tool shown with TR6 TNCU inserts X _ BHTA TR6 ER D6/0.6--M TR6 ER D0/0.79--M TR6 ER D5/ M TR6 ER D/.6-6-M TR6 ER D5/.8-6-M TR6 ER D5/0.98--M TR6 ER D/.6--M TR6 ER D5/.8-5-M CT LF LF _ LF _ LF ONM THZM TR6 ER D6/0.6--M M08 TR6 ER D0/0.79--M M0 TR6 ER D5/ M M TR6 ER D/.6-6-M M6 TR6 ER D5/.8-6-M M6 TR6 ER D5/0.98--M M TR6 ER D/.6--M M6 TR6 ER D5/.8-5-M M6 MIID () () MIID _ () MIID _ (5) MIID _ Lbs Insert TR6 ER D6/0.6--M08-07 TR6 TNCU 0700 TRFF TXMT 070 TR90 TXMT TR6 TNCU 0700 TR6 ER D0/0.79--M0-07 TR6 TNCU 0700 TRFF TXMT 070 TR90 TXMT TR6 TNCU 0700 TR6 ER D5/ M-07 TR6 TNCU 0700 TRFF TXMT 070 TR90 TXMT TR6 TNCU 0700 TR6 ER D/.6-6-M6-07 TR6 TNCU 0700 TRFF TXMT 070 TR90 TXMT TR6 TNCU 0700 TR6 ER D5/.8-6-M6-07 TR6 TNCU 0700 TRFF TXMT 070 TR90 TXMT TR6 TNCU 0700 TR6 ER D5/0.98--M-0 TR6 TNCU 005 TRFF TXMT 00 TR90 TXMT 0008 TR5 TXMT 00. TR6 TNCU 005 TR6 ER D/.6--M6-0 TR6 TNCU 005 TRFF TXMT 00 TR90 TXMT 0008 TR5 TXMT 00.7 TR6 TNCU 005 TR6 ER D5/.8-5-M6-0 TR6 TNCU 005 TRFF TXMT 00 TR90 TXMT 0008 TR5 TXMT 00.9 TR6 TNCU 005 Note: The data refers to master inserts, for other insert radii and geometries refer to the table below Number of inserts () () Master insert identification Master insert identification () Master insert identification (5) Master insert identification TR6 FR Multifunction Face Mills that can Carry Four Different Insert Geometries DHUB ONM BHTA U TR6 TNCU TRFF TXMT TR90 TXMT TR5 TXMT X Tool shown with TR6 TNCU inserts X _ TR6 FR D TR6 FR D TR6 FR D TR6 FR D MIID () () MIID _ () MIID _ (5) MIID _ Lbs TR6 FR D A TR6 TNCU 005 TRFF TXMT 00 TR90 TXMT 0008 TR5 TXMT 00.8 TR6 FR D A TR6 TNCU 005 TRFF TXMT 00 TR90 TXMT 0008 TR5 TXMT 00.7 TR6 FR D A TR6 TNCU 005 TRFF TXMT 00 TR90 TXMT 0008 TR5 TXMT TR6 FR D A TR6 TNCU 005 TRFF TXMT 00 TR90 TXMT 0008 TR5 TXMT 00.9 Note: The data refers to master inserts, for other insert radii and geometries refer to the table below Number of inserts () Master insert identification () Master insert identification () Master insert identification (5) Master insert identification

34 Become an INDUTRY.0 Master! ystem Integration Robots Internet of Things Cloud Big Data D imulation AR s Easy to Use Digital World of Applications Web Apps E-CAT CLOUD Mobile Apps Disclaimer: AR reserves the right to make changes to any of the products appearing in this publication. Offers may be withdrawn without prior notices. All orders must drop ship complete. No blanket orders. No Returns.