DEAL. Victory Shoulder Mill Series Starter KITS: VSM11 and VSM17 Cutter with 10 Inserts, Starter KITS. VSM490 Cutter with 20 Inserts
|
|
- Garry Walton
- 6 years ago
- Views:
Transcription
1 Victory Shoulder Mill Series Starter KITS: VSM11 and VSM17 Cutter with 10 Inserts, DEAL VSM490 Cutter with 20 Inserts The Victory Shoulder Mill Series is a high-performance, versatile, robust, 90 square shoulder milling platform. With 3 market-leading platforms, including VSM11, VSM17, and VSM490, Victory Shoulder Mill Series offers the best-in-class shoulder milling solution. Returns not permitted on promotional transactions. OFFER VALID UNTIL: August 31, 2016 Starter KITS VSM11 VSM11 is designed for versatility, low horsepower consumption, and easy cutting action. VSM11 offers insert corner radii from " (0,4 4.0mm) and axial depth-of-cut up to 0.461" (11.7mm). Cutters can be used for profiling, slotting, ramping, helical interpolation, circular interpolation, and other milling applications. Inserts are specially designed with innovative geometries and features like various rake angles, negative T-land, small hone, and the latest Victory grades, enhancing tool performance and versatility. VSM17 The VSM17 is the latest addition to the Victory Shoulder Mill family. The VSM17 is a high-performance, robust, highly positive, 90 shoulder milling platform, designed for low horsepower consumption, versatility, and soft cutting action. With eight WIDIA Victory grades, four geometries and a well-rounded steel portfolio, the VSM17 covers multiple material types and applications. From light, precise machining to medium roughing, with a max axial depth-of-cut of 0.645" (16.4mm), VSM17 gets it all done. VSM490 The VSM490 platform is specially engineered to achieve excellent performance in regards to surface quality, as well as higher material removal rates in shoulder and face milling applications. Its unique design allows our customers to apply the tool in multiple passes (stepping down) with outstanding results from roughing to finishing operations. With a max axial depth-of-cut of 0.59" (15mm) and three geometries, VSM490 covers a lot of applications. Inserts VSM11, VSM17, and VSM490 inserts are offered in the new high-performance Victory grades: WP25PM, WP40PM, WK15CM, WS30PM, W, WK15PM, WP35CM, WN25PM, and WN10HM. DISTRIBUTED BY: Cutter Bodies VSM11, VSM17, and VSM490 are available in shell mill, screw-on mill, cylindrical shank, and Weldon shank models with internal air and coolant supply.
2 Features and Benefits VSM11 Insert geometries and grades for most workpiece materials. Insert corner radii from " (0,4 4mm). Axial depth-of-cut up to 0.461" (11.7mm). Achieve true 90 wall finish. Easy cutting action. Aggressive ramping capability. Latest WIDIA Victory milling grades for several workpiece materials. Soft cutting action, reduced cycle times, and low horsepower consumption. VSM17 New optimized insert geometry and tighter pocket tolerance to achieve true 90 wall finish. Newly optimized positive rake insert design for smoother cutting action, reduced forces, and lower horsepower consumption. Aggressive ramping capability with max ramp angle up to 8.8. Axial depth-of-cut up to 0.645" (16.4mm). Insert geometries and grades for most workpiece materials. Insert corner radii from " (0,4 6mm). VSM490 Double-sided strong insert with 4 cutting edges. Increase productivity at a lower cost per edge. High positive geometry for lower cutting forces. Provides for higher feed rates resulting in higher productivity. Superior wall and surface finish capabilities. Eliminate potential surface clean up passes. Stepless solution when using multiple steps. Latest WIDIA Victory grades offered. Longer tool life with the most reliable performance. Covering majority of workpiece materials.
3 Victory Shoulder Mill Series Starter KITS nvsm11 Starter Kits Inch content order number catalog number diameter D1 (in) cutter body type material group cutter qty inserts grade VSM11KITWD062Z02WP40PM 0.62 WELDON P VSM11D062Z02W062XD11 10 XDPT1102SRMM WP40PM VSM11KITWD075Z03WP40PM 0.75 WELDON P VSM11D075Z03W075XD11 10 XDPT1102SRMM WP40PM VSM11KITWD100Z04WP40PM 1.00 WELDON P VSM11D100Z04W100XD11 10 XDPT1102SRMM WP40PM VSM11KITCD075Z03WP40PM 0.75 CYLINDRICAL P VSM11D075Z03C075XD11L XDPT1102SRMM WP40PM VSM11KITCD062Z02WP40PM 0.62 CYLINDRICAL P VSM11D062Z02C062XD11L XDPT1102SRMM WP40PM VSM11KITCD100Z04WP40PM 1.00 CYLINDRICAL P VSM11D100Z04C100XD11L XDPT1102SRMM WP40PM VSM11KITSD200Z05WP40PM 2.00 SHELL P VSM11D200Z05S075XD11 10 XDPT1102SRMM WP40PM VSM11KITSD150Z04WP40PM 1.50 SHELL P VSM11D150Z04S075XD11 10 XDPT1102SRMM WP40PM 4 *Starter Kit to be delivered in regular WIDIA corrugated box. Z (pocket seats) price nvsm17 Starter Kits Inch content order number catalog number diameter D1 (in) cutter body type material group cutter qty inserts qty grade VSM17KITCD100Z2WP40PM 1.00 CYLINDRICAL P VSM17D100Z02C100XD17L450 1 XDPT170408PESRMM 10 WP40PM VSM17KITSW100Z2WP40PM 1.00 SCREW ON P VSM17D100Z02M12XD17 1 XDPT170408PESRMM 10 WP40PM VSM17KITCD125Z2WP40PM 1.25 CYLINDRICAL P VSM17D125Z02C125XD17L480 1 XDPT170408PESRMM 10 WP40PM VSM17KITCD125Z3WP40PM 1.25 CYLINDRICAL P VSM17D125Z03C125XD17L480 1 XDPT170408PESRMM 10 WP40PM VSM17KITSW125Z3WP40PM 1.25 SCREW ON P VSM17D125Z03M16XD17 1 XDPT170408PESRMM 10 WP40PM VSM17KITWD125Z3WP40PM 1.25 WELDON P VSM17D125Z03W125XD17 1 XDPT170408PESRMM 10 WP40PM VSM17KITWD150Z3WP40PM 1.50 WELDON P VSM17D150Z03W150XD17 1 XDPT170408PESRMM 10 WP40PM VSM17KITCD150Z4WP40PM 1.50 CYLINDRICAL P VSM17D150Z04C150XD17L520 1 XDPT170408PESRMM 10 WP40PM VSM17KITSD150Z4WP40PM 1.50 SHELL MILL P VSM17D150Z04S075XD17 1 XDPT170408PESRMM 10 WP40PM VSM17KITSD200Z4WP40PM 2.00 SHELL MILL P VSM17D200Z04S075XD17 1 XDPT170408PESRMM 10 WP40PM VSM17KITSD200Z5WP40PM 2.00 SHELL MILL P VSM17D200Z05S075XD17 1 XDPT170408PESRMM 10 WP40PM VSM17KITSD250Z5WP40PM 2.50 SHELL MILL P VSM17D250Z05S075XD17 1 XDPT170408PESRMM 10 WP40PM VSM17KITSD300Z6WP40PM 3.00 SHELL MILL P VSM17D300Z06S100XD17 1 XDPT170408PESRMM 10 WP40PM VSM17KITSD400Z8WP40PM 4.00 SHELL MILL P VSM17D400Z08S150XD17 1 XDPT170408PESRMM 10 WP40PM VSM17KITCD100Z2WK15CM 1.00 CYLINDRICAL K VSM17D100Z02C100XD17L450 1 XDPT170408PESRMM 10 WK15CM VSM17KITSW100Z2WK15CM 1.00 SCREW ON K VSM17D100Z02M12XD17 1 XDPT170408PESRMM 10 WK15CM VSM17KITCD125Z2WK15CM 1.25 CYLINDRICAL K VSM17D125Z02C125XD17L480 1 XDPT170408PESRMM 10 WK15CM VSM17KITCD125Z3WK15CM 1.25 CYLINDRICAL K VSM17D125Z03C125XD17L480 1 XDPT170408PESRMM 10 WK15CM VSM17KITSW125Z3WK15CM 1.25 SCREW ON K VSM17D125Z03M16XD17 1 XDPT170408PESRMM 10 WK15CM VSM17KITWD125Z3WK15CM 1.25 WELDON K VSM17D125Z03W125XD17 1 XDPT170408PESRMM 10 WK15CM VSM17KITWD150Z3WK15CM 1.50 WELDON K VSM17D150Z03W150XD17 1 XDPT170408PESRMM 10 WK15CM VSM17KITCD150Z4WK15CM 1.50 CYLINDRICAL K VSM17D150Z04C150XD17L520 1 XDPT170408PESRMM 10 WK15CM VSM17KITSD150Z4WK15CM 1.50 SHELL MILL K VSM17D150Z04S075XD17 1 XDPT170408PESRMM 10 WK15CM VSM17KITSD200Z4WK15CM 2.00 SHELL MILL K VSM17D200Z04S075XD17 1 XDPT170408PESRMM 10 WK15CM VSM17KITSD200Z5WK15CM 2.00 SHELL MILL K VSM17D200Z05S075XD17 1 XDPT170408PESRMM 10 WK15CM VSM17KITSD250Z5WK15CM 2.50 SHELL MILL K VSM17D250Z05S075XD17 1 XDPT170408PESRMM 10 WK15CM VSM17KITSD300Z6WK15CM 3.00 SHELL MILL K VSM17D300Z06S100XD17 1 XDPT170408PESRMM 10 WK15CM VSM17KITSD400Z8WK15CM 4.00 SHELL MILL K VSM17D400Z08S150XD17 1 XDPT170408PESRMM 10 WK15CM 8 Z (pocket seats) price (continued)
4 Victory Shoulder Mill Series Starter KITS (continued) nvsm Starter Kits Inch order number catalog number VSM490KITWD100Z- 02WP40PM VSM490KITWD125Z- 03WP40PM VSM490KITWD150Z- 04WP40PM VSM490KITSD150Z- 05WP40PM VSM490KITSD200Z- 05WP40PM VSM490KITSD200Z- 06WP40PM VSM490KITSD250Z- 06WP40PM VSM490KITSD300Z- 07WP40PM VSM490KITSD400Z- 08WP40PM VSM490KITCD100Z02W VSM490KITCD125Z03W VSM490KITSD150Z05W VSM490KITSD200Z05W VSM490KITSD200Z06W VSM490KITSD250Z06W VSM490KITSD300Z07W- VSM490KITWD100Z WK15PM VSM490KITWD125Z WK15PM VSM490KITSD150Z WK15PM VSM490KITSD200Z WK15PM VSM490KITSD250Z WK15PM VSM490KITSD300Z WK15PM VSM490KITSD400Z WK15PM Heavy/Roughing Medium Light Machining/Finishing cutter diameter/ flutes cutter body type material group application range content cutter qty inserts grade qty 1.00z2 WELDON P VSM490D100Z02W100XN15 1 XNPU15T608SRMM WP40PM z3 WELDON P VSM490D125Z03W100XN15 1 XNPU15T608SRMM WP40PM z4 WELDON P VSM490D150Z04W125XN15 1 XNPU15T608SRMM WP40PM z5 SHELL MILL P VSM490D150Z05S050XN15 1 XNPU15T608SRMM WP40PM z5 SHELL MILL P VSM490D200Z05S075XN15 1 XNPU15T608SRMM WP40PM z6 SHELL MILL P VSM490D200Z06S075XN15 1 XNPU15T608SRMM WP40PM z6 SHELL MILL P VSM490D250Z06S075XN15 1 XNPU15T608SRMM WP40PM z7 SHELL MILL P VSM490D300Z07S100XN15 1 XNPU15T608SRMM WP40PM z8 SHELL MILL P VSM490D400Z08S150XN15 1 XNPU15T608SRMM WP40PM z2 CYLINDRICAL M+S VSM490D100Z02C100XN15L800 1 XNGU15T608ERML W z3 CYLINDRICAL M+S VSM490D125Z03C125XN15L800 1 XNGU15T608ERML W z5 SHELL MILL M+S VSM490D150Z05S050XN15 1 XNGU15T608ERML W z5 SHELL MILL M+S VSM490D200Z05S075XN15 1 XNGU15T608ERML W z6 SHELL MILL M+S VSM490D200Z06S075XN15 1 XNGU15T608ERML W z6 SHELL MILL M+S VSM490D250Z06S075XN15 1 XNGU15T608ERML W z7 SHELL MILL M+S VSM490D300Z07S100XN15 1 XNGU15T608ERML W z2 WELDON K VSM490D100Z02W100XN15 1 XNPU15T608SRMM WK15PM z3 WELDON K VSM490D125Z03W100XN15 1 XNPU15T608SRMM WK15PM z5 SHELL MILL K VSM490D150Z05S050XN15 1 XNPU15T608SRMM WK15PM z6 SHELL MILL K VSM490D200Z06S075XN15 1 XNPU15T608SRMM WK15PM z7 SHELL MILL K VSM490D250Z07S100XN15 1 XNPU15T608SRMM WK15PM z9 SHELL MILL K VSM490D300Z09S100XN15 1 XNPU15T608SRMM WK15PM z11 SHELL MILL K VSM490D400Z11S150XN15 1 XNPU15T608SRMM WK15PM 20 price For more information, please see the NEW 2017 WIDIA Master Catalog (A ). Order your copy now at. The Most Advanced Milling Solutions in the Industry For unsurpassed quality, value, and performance, you can trust WIDIA to provide the most comprehensive line of reliable metalcutting tools. Whatever your indexable milling product requirements, be assured that you will find the appropriate solution in this all-inclusive, easy-to-use guide. For every milling application, workpiece, or equipment need, we offer the best tools on the market, designed to reduce your machining time, provide superior surface finishes, and outperform the competition WIDIA Products Group. All rights reserved. A EN You can also use our NOVO app to guide you to the correct choice! For more information, please visit /novo.
5 Victory Shoulder Mill Series DEAL Buy 10 Inserts Per Pocket and Get the Corresponding Cutter Body FREE The Victory Shoulder Mill Series is a high-performance, versatile, robust, 90 square shoulder milling platform. With 3 market-leading platforms, including VSM11, VSM17, and VSM490, Victory Shoulder Mill Series offers the best-in-class shoulder milling solution. Returns not permitted on promotional transactions. OFFER VALID UNTIL: August 31, 2016 VSM11 VSM11 is designed for versatility, low horsepower consumption, and easy cutting action. VSM11 offers insert corner radii from " (0,4 4.0mm) and axial depth-of-cut up to 0.461" (11.7mm). Cutters can be used for profiling, slotting, ramping, helical interpolation, circular interpolation, and other milling applications. Inserts are specially designed with innovative geometries and features like various rake angles, negative T-land, small hone, and the latest Victory grades, enhancing tool performance and versatility. VSM17 The VSM17 is the latest addition to the Victory Shoulder Mill family. The VSM17 is a high-performance, robust, highly positive, 90 shoulder milling platform, designed for low horsepower consumption, versatility, and soft cutting action. With eight WIDIA Victory grades, four geometries, and a well-rounded steel portfolio, the VSM17 covers multiple material types and applications. From light, precise machining to medium roughing, with a max axial depth-of-cut of 0.645" (16.4mm), VSM17 gets it all done. VSM490 The VSM490 platform is specially engineered to achieve excellent performance in regards to surface quality, as well as higher material removal rates in shoulder and face milling applications. Its unique design allows our customers to apply the tool in multiple passes (stepping down) with outstanding results from roughing to finishing operations. With a max axial depth-of-cut of 0.59" (15mm) and three geometries, VSM490 covers a lot of applications. Inserts VSM11, VSM17, and VSM490 inserts are offered in the new high-performance Victory grades: WP25PM, WP40PM, WK15CM, WS30PM, W, WK15PM, WP35CM, WN25PM, and WN10HM. DISTRIBUTED BY: Cutter Bodies VSM11, VSM17, and VSM490 are available in shell mill, screw-on mill, cylindrical shank, and Weldon shank models with internal air and coolant supply.
6 Features and Benefits VSM11 Insert geometries and grades for most workpiece materials. Insert corner radii from " (0,4 4mm). Axial depth-of-cut up to 0.461" (11.7mm). Achieve true 90 wall finish. Easy cutting action. Aggressive ramping capability. Latest WIDIA Victory milling grades for several workpiece materials. Soft cutting action, reduced cycle times, and low horsepower consumption. VSM17 New optimized insert geometry and tighter pocket tolerance to achieve true 90 wall finish. Newly optimized positive rake insert design for smoother cutting action, reduced forces, and lower horsepower consumption. Aggressive ramping capability with max ramp angle up to 8.8. Axial depth-of-cut up to 0.645" (16.4mm). Insert geometries and grades for most workpiece materials. Insert corner radii from " (0,4 6mm). VSM490 Double-sided strong insert with 4 cutting edges. Increase productivity at a lower cost per edge. High positive geometry for lower cutting forces. Provides for higher feed rates resulting in higher productivity. Superior wall and surface finish capabilities. Eliminate potential surface clean up passes. Stepless solution when using multiple steps. Latest WIDIA Victory grades offered. Longer tool life with the most reliable performance. Covering majority of workpiece materials. For more information, please see the NEW 2017 WIDIA Master Catalog (A ). Order your copy now at. The Most Advanced Milling Solutions in the Industry For unsurpassed quality, value, and performance, you can trust WIDIA to provide the most comprehensive line of reliable metalcutting tools. Whatever your indexable milling product requirements, be assured that you will find the appropriate solution in this all-inclusive, easy-to-use guide. For every milling application, workpiece, or equipment need, we offer the best tools on the market, designed to reduce your machining time, provide superior surface finishes, and outperform the competition WIDIA Products Group All rights reserved. A EN You can also use our NOVO app to guide you to the correct choice! For more information, please visit /novo.
7 WIDIA Victory -FS and -MS Geometries DEAL Buy 20 Inserts and get 10 Inserts for FREE The new -FS and -MS geometries from WIDIA are specifically designed for use in high-temperature alloys, nickel-based (INCONEL, Udimet, Rene) materials, cobalt-based (Haynes ), Fe-based (Airmet 100) materials, titanium and titanium alloys, as well as difficult-to-machine stainless (460SS, duplex, high-alloy stainless), cobalt-chrome, and stainless-based powdered metals. Returns not permitted on promotional transactions. OFFER VALID UNTIL: August 31, 2016 New WIDIA Victory grades and geometries are designed to offer better tool life and surface finishes...gg-fs Geometry All..GG-FS inserts are G tolerance inserts. This is a critical feature in some applications, especially the aerospace industry. Reduced cycle times high speed and feed capability. Reduced cutting forces improved dimensional control and reduced deflections. New chip forming elements better chip control. Long tool life new multilayer coating provides better wear resistance. Proven seating smooth and secure seating surface. High rake to allow smooth chip flow. Precision ground provides high cutting edge quality to reduce depth-of-cut notching and provide consistency in component dimensions. Proprietary nose geometry for better chipbreaking under medium parameters...mg-ms Geometry High positive rake angle delivers improved tool life by reducing cutting forces and built-up edge when machining high-temp alloys. Improved chip control and reduced crater wear due to proprietary chipbreakers with varying shapes and distances. Reduced thermal wear and cracking due to near sharp cutting edge with optimized edge treatment. Improved chipbreaking at various depths of cut due to variable land width, which improves impact strength. All MG-MS inserts are molded, which supports increased tool life due to the elimination of grinding stress. High rake to allow smooth chip flow. Variable land width to provide good impact strength and low wear. Proprietary nose geometry for better chipbreaking under medium parameters.
8 WIDIA Victory -FS and -MS Geometries n..gg -FS Geometry ISO Catalog Number n..mg -MS Geometry ANSI Catalog Number WS10PT WS25PT WU10HT CNGG120401FS CNGG430FS CNGG120402FS CNGG4305FS CNGG120404FS CNGG431FS CNGG120408FS CNGG432FS CNGG120412FS CNGG433FS DNGG110402FS DNGG3305FS DNGG110404FS DNGG331FS DNGG110408FS DNGG332FS DNGG150401FS DNGG430FS DNGG150402FS DNGG4305FS DNGG150404FS DNGG431FS DNGG150408FS DNGG432FS DNGG150412FS DNGG433FS DNGG150604FS DNGG441FS DNGG150608FS DNGG442FS SNGG120408FS SNGG432FS TNGG160404FS TNGG331FS TNGG220408FS TNGG432FS VNGG160401FS VNGG330FS VNGG160402FS VNGG3305FS VNGG160404FS VNGG331FS VNGG160408FS VNGG332FS WNGG080404FS WNGG431FS WNGG080408FS WNGG432FS ISO Catalog Number ANSI Catalog Number WS10PT WS25PT WU10HT CNMG120404MS CNMG431MS CNMG120408MS CNMG432MS CNMG120412MS CNMG433MS CNMG120416MS CNMG434MS CNMG160608MS CNMG542MS CNMG160612MS CNMG543MS CNMG190608MS CNMG642MS CNMG190612MS CNMG643MS CNMG190616MS CNMG644MS DNMG110408MS DNMG332MS DNMG150404MS DNMG431MS DNMG150408MS DNMG432MS DNMG150412MS DNMG433MS DNMG150604MS DNMG441MS DNMG150608MS DNMG442MS DNMG150612MS DNMG443MS SNMG120408MS SNMG432MS SNMG120412MS SNMG433MS SNMG190612MS SNMG643MS TNMG160404MS TNMG331MS TNMG160408MS TNMG332MS TNMG220404MS TNMG431MS TNMG220408MS TNMG432MS TNMG220412MS TNMG433MS TNMG270608MS TNMG542MS VNMG160404MS VNMG331MS VNMG160408MS VNMG332MS VNMG220404MS VNMG431MS VNMG220408MS VNMG432MS WNMG060408MS WNMG332MS WNMG080404MS WNMG431MS WNMG080408MS WNMG432MS For more information, please see the NEW 2017 WIDIA Master Catalog (A ). Order your copy now at. DISTRIBUTED BY: 2016 WIDIA Products Group All rights reserved. A EN
VSM11. WIDIA Victory Shoulder Mill 11 VSM11
WIDIA Victory Shoulder Mill 11 VSM11 Victory Shoulder Mill 11 is a high-performance, versatile, robust, 90 square shoulder milling platform. VSM11 is designed for versatility, low horsepower consumption,
More informationVSM11. WIDIA Victory Shoulder Mill 11 VSM11
Victory Shoulder Mill 11 ADVANCES 2015 WIDIA Victory Shoulder Mill 11 VSM11 Victory Shoulder Mill 11 is a high-performance, versatile, robust, 90 square shoulder milling platform. VSM11 is designed for
More informationMILL 4-11 TM 90 SHOULDER MILLING TO THE EXTREME
www.kennametal.com MILL 4-11 TM 90 SHOULDER MILLING TO THE EXTREME Mill 4-11 One tool for all applications The Mill 4-11 Series is specially engineered to achieve excellent performance in regards to surface
More informationCARBIDE END MILLS SPECIFICATIONS
SPECIFICATIONS COATING GUIDE Material Hardness TiN TiCN TiALN Austentic Stainless Steel < 35 HRc * X Martinistic Stainless Steel < 35 HRc * X Martinistic Stainless Steel >= 35 HRc X PH Stainless Steel
More informationNPA. Expansion of the HM390 Triangular Inserts Line with Tools Carrying 5 mm Edged Inserts. New Product Announcement. Page 1 / 9
NPA Expansion of the HM390 Triangular Inserts Line with Tools Carrying 5 mm Edged Inserts Page 1 / 9 Page 2 / 9 Highlights Tools carrying triangular inserts with 5 mm helical cutting edges Effective and
More informationMASTER CATALOGUE. Beyond EADE Solid Ceramic End Mills.
MASTER CATALOGUE Beyond EADE Solid Ceramic End Mills Beyond EADE Solid Ceramic End Mill Primary Application EADE Solid Ceramic End Mills offer higher productivity and tool life in roughing nickel-based
More informationCopy Milling Program Tools
Millstar face mills are equally useful on newer high velocity machines and older slower equipment and will optimize milling performance of all your machine tools. The hardened tool bodies can be run at
More informationwith better tools from Introducing: Dapra's New Modular Heads Designed to Screw On to Industry Standard Systems
CUTTING Times Vol. 4, Issue 1 with better tools from Dapra Corporation 66 Granby Street, Bloomfield, CT 06002 1-800-243-3344 860-242-8539 Fax 860-242-3017 Email info@dapra.com www.dapra.com Introducing:
More informationTOMORROW S TOOLING TODAY SECO NEWS SUMMARY
TOMORROW S TOOLING TODAY SECO NEWS SUMMARY 2018.1 TOOLS FOR LIMITLESS PRODUCTIVITY AND PROFITABILITY JETSTREAM TOOLING WELCOME TO SECO NEWS SUMMARY 2018.1 Discover how the latest Seco innovations, many
More informationOptimized flute design Better chip evacuation. Carbide substrate Higher heat resistance, higher speed.
Thread Mills Available for the first time, our solid thread mills are designed to be the highest quality thread milling solution. WIDIA-GTD Cut up to 63 HRC. Improved overall thread quality. Optimized
More informationThink efficiency, Think HSS MILLING
Think efficiency, Think HSS MILLING SUMMARY MILLING TOOLS 2 Zoom on a milling cutter 3 Which HSS for maximum efficiency? 4 Coatings for the best performance 5 Vocabulary 6 Choose the right design 7 Select
More informationTOMORROW S TOOLING TODAY SECO NEWS SUMMARY
TOMORROW S TOOLING TODAY SECO NEWS SUMMARY 2018.1 TOOLS FOR LIMITLESS PRODUCTIVITY AND PROFITABILITY WELCOME TO SECO NEWS SUMMARY 2018.1 Discover how the latest Seco innovations, many of which are featured
More informationSpeed (SFM) Radial DOC x D. .5 x D. 1 x D. .5 x D. 1 x D. .5 x D.
GP High Performance 4 Flute End Mills TyCarb GP High Performance end mills feature Differential flute spacing to achieve virtually chatter free machining in a wide range of materials. Excellent results
More informationPCD Cartridge Style Face Mill and End Mill Program
PC Cartridge Style Face Mill and End Mill Program soft, free- non-ferrous metals (eg: 6061 aluminum, brass, and copper) graphite, carbon, green ceramics, fiber-reinforced plastics, and fiberboard low-silicon
More informationPROMOTIONS2016. Machining Intelligently. Self. ISCAR's Winning Edge Machining Innovations. ISCAR ENDUSERS
PROMOTIONS2016 ENDUSERS ISCAR's Winning Edge Machining Innovations Self Excellent Cylindricity and Superb Surface Finish! New Cutters Carrying Square Single-Sided Inserts Endmills with Indexable Solid
More informationFMA 2000 / 5 FMA 63 / 5 FM 1000 / FM 25 / Copy Milling Program Tool Contents. Milling Cutters Identification System Arbor
Copy Milling Program Tool Contents FM Style 1 Toroid Cylindrical End Milling Cutter 42/43 FM Style 2 Toroid Taper End Milling Cutter 42/43 FMA Arbor Style Milling Cutter 42/43 Insert ata 44/45 Cutting
More informationFMA 2000 / 5 FMA 63 / 5 FM 1000 / FM 25 / Copy Milling Program Tool Contents. Milling Cutters Identification System Arbor
Copy Milling Program Tool Contents FM Style 1 Toroid Cylindrical End Milling Cutter 38/39 FM Style 2 Toroid Taper End Milling Cutter 38/39 FMA Arbor Style Milling Cutter 38/39 Insert ata 40/41 Cutting
More information18mm Insert Face Mill
January 2005 / NEW-033 PAGE 1 OF 9 18mm Insert Face Mill MATERIAL Cast Iron, Stainless Steel, Carbon Steel, Hi-Temp Alloys, Titanium, Inconel DIAMETER RANGE 3.00" - 12.00" LEAD ANGLES 0º and 45º INSERT
More informationHIGH PERFORMANCE CARBIDE THREAD MILLS
HIGH PERFORMANCE CARBIDE THREAD MILLS TM Series HIGH PERFORMANCE CARBIDE THREAD MILLS table of contents Introduction... page 1 Understanding Milling... page 2 Niagara Mill Advantages... page 3 High Performance
More informationShoulder Mills.
Mill 1-10 Platform...................................................................P2 P20 Mill 1-10, 0 Shoulder Milling Cutters...............................................P2 P12 Mill 1-10, 0 Helical
More informationLEADING SOLUTIONS IN THREAD MILLING TECHNOLOGY
LEADING SOLUTIONS IN THREAD MILLING TECHNOLOGY Thread with Maximum Confidence, Depth, Versatility and Economy. Emuge Shur-Thread TM, Threads-All TM, Vario-Z and NPT Solid Carbide Thread Mills; and Gigant-ic
More informationInsert Inch Overview. Insert Overview
Insert Overview The Inserts Millstar inserts are fully ground precision inserts for better chip control, faster metal removal and higher surface accuracies. They are far more accurate than pressed and
More informationCoroMill. All solutions at a glance
CoroMill All solutions at a glance CoroMill Product overview Milling grades according to groups Shoulder milling CoroMill 316 CoroMill 490 CoroMill 790 Long edge cutter Insert size Max. cutting depth a
More information323 and 365 Series SmoothFlute Variable Helix End Mills
323 and 365 Series SmoothFlute Variable Helix End Mills 323-365 High Speed Machining / HSM as well as traditional milling. Designed for advanced tool path software. Variable Helix where the helix changes
More informationHertel Indexable Drills (HID)
Hertel Indexable Drills (HID) mscdirect.com/hertel DESIGNED TO DELIVER Hertel cutting tools are designed to deliver consistency, reliability, durability and value with every cut. For over 65 years, Hertel
More informationPROMO PRICING EXPIRES MAY 31ST, 2018
PROMO PRICING EXPIRES MAY 31ST, 2018 Available From: Specifications are subject to change without notice. No responsibility for errors and/or printing errors will be accepted. High Feed HF Milling Program
More informationShoulder Mills.
Mill 1-10 Platform...................................................................P2 P20 Mill 1-10, 0 Shoulder Milling Cutters...............................................P2 P12 Mill 1-10, 0 Helical
More informationUPDATE. NEW Gold-QuadF 09 09mm IC Insert Sizes
Styles: End Mill 15G1F Face Mill 5G5F, 5G6F s: 1.000" - 3.000" Inserts: SDXS0904MPR-MM SDXS0904MPR-MR SDXS0904MPR-MR1 Grades: IN4004 IN4005 IN4030 IN4035 UPDATE NEW Gold-QuadF 09 09mm IC Insert Sizes Features
More informationPROMOTIONS2016. Machining Intelligently. Self. ISCAR's Winning Edge Machining Innovations. ISCAR ENDUSERS
PROMOTIONS2016 ENDUSERS ISCAR's Winning Edge Machining Innovations Self Excellent Cylindricity and Superb Surface Finish! New Cutters Carrying Square Single-Sided Inserts Endmills with Indexable Solid
More informationMAXIMILL SHOULDER MILLING SYSTEM PRODUCT INFORMATION. Presentation _Customer
MAXIMILL 491 90 SHOULDER MILLING SYSTEM PRODUCT INFORMATION Presentation _Customer 2 \ MAXIMILL 491 PRODUCT LAUNCH AGENDA General information Overall message Unique sales proposition Technical details
More informationMillLine Tungaloy Report No. 429-US www.tungaloyamerica.com Exceptional productivity for aluminum and non-ferrous material machining! www.tungaloyamerica.com MillLine V-shaped bottom secures insert on
More informationCutting Tools DIGEST Catalog
Cutting Tools DIGEST Catalog Insert Grade CVD Coating Innovation CA5 series Ultra fine interface increases adhesion strength to provide long tool life and stable machining High aspect ratio of α-al 2 O
More informationMetal Cutting - 5. Content. Milling Characteristics. Parts made by milling Example of Part Produced on a CNC Milling Machine 7.
Content Metal Cutting - 5 Assoc Prof Zainal Abidin Ahmad Dept. of Manufacturing & Industrial Engineering Faculty of Mechanical Engineering Universiti Teknologi Malaysia 7. MILLING Introduction Horizontal
More informationNew. Products2013.
T u n g a l o y www.tungaloy.com Company Overview Providing Complete Tooling Solutions for the Metal Removal and Industrial Product Sectors TUNGALOY is one of the world s leading manufacturers of carbide
More informationNEW. MILLLINE High Speed Milling Cutter. Exceptional productivity for aluminum and non-ferrous machining. Keeping the Customer First
Keeping the Customer First Tungaloy Report No. 429-US MILLLINE High Speed Milling Cutter NEW Exceptional productivity for aluminum and non-ferrous machining NEW CHIPBREAKER Outstanding productivity in
More information30 Bevel High Feed Cutter 13mm & 19mm IC Insert Sizes
0 Bevel igh Feed Cutter mm & mm IC Insert Sizes Insert Series: SDES SDMS SDES SDMS Face Mills: MP (mm IC) MP (mm IC) MM (mm IC) MM (mm IC) Insert Grades: IN00 IN00 IN0 IN0 IN0 IN Applications: Die & Mold
More informationApplication and Technical Information Thread Milling System (TMS) Minimum Bore Diameters for Thread Milling
Inserts Application and Technical Information Minimum Bore iameters for Thread Milling UN-ISO-BSW tpi 48 3 4 0 16 1 10 8 7 6 5 4.5 4 Technical ata Accessories Vintage Cutters Widia Cutters Thread Milling
More informationRouter Section 2018 Master Catalog
Router Section 2018 Master Catalog For more than 95 years, M.A. Ford has been at the cutting edge of tooling design and manufacturing and has developed an enviable global reputation for performance and
More informationDIE & MOLD MACHINING TOOL SOLUTIONS FOR INDUSTRIES DM18 HEAD OFFICE
DM18 DIE & MOLD MACHINING TOOL SOLUTIONS FOR INDUSTRIES HEAD OFFICE 211, Sewolcheon-ro, Bupyeong-gu, Incheon, South Korea Phone : +82-32-526-0909 E-mail : yg1@yg1.kr www.yg1.kr Note The new address above
More informationMissouri's trusted provider of carbide cutting tools!
45 & 90 Face Mill Packages For facing, plunging, ramping, and pocket milling Missouri's trusted provider 45 Face Mill packages includes SEKT inserts Watch our All-Material Inserts in action! 90 Face Mill
More informationSHEAR IT. CLEAR IT. STREAKERS END MILLS M2 SERIES FRACTIONAL CATALOG. Put aluminum in its place.
SHEAR IT. CLEAR IT. STREAKERS END MILLS M2 SERIES FRACTIONAL CATALOG Put aluminum in its place. CONTENTS: 4 STREAKERS M2 Features IMCO s unique design makes the entire STREAKERS M2 Series first-rate roughers
More informationAUTOMOTIVE TOOL SOLUTIONS FOR INDUSTRIES
AM18 AUTOMOTIVE TOOL SOLUTIONS FOR INDUSTRIES HEAD OFFICE 211, Sewolcheon-ro, Bupyeong-gu, Incheon, South Korea Phone : +82-2-526-0909 E-mail : yg1@yg1.kr www.yg1.kr Note The new address above has currently
More informationCost reduction Cost reduction Cost reduction
Cost reduction Quality, performance, value - Guaranteed! Work-Piece Cutting Speed vc(sfm) ISO Material Hardness (HB) Hardness (HRC) PC5300 PC5400 P Carbon steel C = 0.10-0.35% 80~180 10~ 459~886 328~820
More informationSolid Round Tools. Solid Carbide Drills Reamers End Mills Thread Mills HSS Taps. Versatile Optimized Customized
Solid Round Tools Solid Carbide Drills Reamers End Mills Thread Mills HSS Taps V O C Versatile Optimized Customized Content Introducing Solid Round Tools Product portfolio How to find the right product
More informationSECO NEWS SUMMARY YOUR TOOLS FOR OPTIMIZED PRODUCTIVITY
SECO NEWS SUMMARY 2018.2 YOUR TOOLS FOR OPTIMIZED PRODUCTIVITY SOLUTIONS DESIGNED TO EXCEL DOUBLE QUATTROMILL 22 WELCOME TO SECO NEWS SUMMARY 2018.2 Process optimization is the key to continued productivity
More informationDr Ghassan Al-Kindi - MECH2118 Lecture 9
Dr Ghassan Al-Kindi - MECH2118 Lecture 9 Machining A material removal process in which a sharp cutting tool is used to mechanically cut away material so that the desired part geometry remains Most common
More informationSeco NewS Summary
Seco NewS Summary 2014-1 2 overcoming your challenges At Seco, every action we take is calculated to overcome the challenges you face today and will face tomorrow. Our global team partners closely with
More information90 Long Edge Helical End Mill
Limited Package Time Savings Savings on Techniks on Long Edge Milling End Tools Mills 90 Long Edge Helical End Mill For heavy-duty roughing including: slotting, profiling, deep shoulder cutting and ramping
More informationINNOVATIONS CATALOG HARVI III Ball Nose
www.kennametal.com INNOVATIONS CATALOG HARVI III Ball Nose HARVI III Ball Nose High-Performance Solid Carbide End Mills Primary Application HARVI III Ball Nose tooling takes high-performance profiling,
More informationPROMOTIONS2015. Machining Intelligently KIT DEMO KIT. Valid until February 28, 2015 IQ ISCAR HIGH Q LINES.
PROMOTIONS2015 Valid until February 28, 2015 IQ IQ DEMO KIT KIT www.iscar.com KIT 1 Promo Code #IQV8 TURNING - Economy and Heavy Cut ISO style inserts, used in all machine shops, historically represent
More informationAPOLLO. Variable Helix Corner Radius End Mills. Excellent for Alloy Steel, Nickel Inconel Alloys, Stainless and Carbon Steel
Variable Helix Corner Radius End Mills Excellent for Alloy Steel, Nickel Inconel Alloys, Stainless and Carbon Steel Unequal Flute Design for Chatter Resistance Great for Roughing or Finishing High Performance
More informationParting & Grooving: How to achieve greater performance, quality, and tool life in the 21st century
Technical article May 2015 Parting & Grooving: How to achieve greater performance, quality, and tool life in the 21st century Production engineers faced with overcoming the challenges of parting and grooving
More informationJANUARY 2007 / NEW-072 / PAGE 1 OF 7
JANUARY 2007 / NEW-072 / PAGE 1 OF 7 Ingersoll TaeguLine introduces HEX-TURN, a new, unique addition to the turning product line that offers exceptional performance and cost saving benefits. The 12 cutting
More informationMulti-Functional Cutting MFC-R The solution for 3D machining!
passion for precision Multi-Functional Cutting MFC-R The solution for 3D machining! Enhanced cutting data calculator ToolExpert MFC Multifunctionality as the key factor for simplifying the entire production
More informationSTYLE CY/SFCY STYLE TA/SFTA
STYLE CY/SFCY 2 STYLE TA/SFTA 2 6. Tool Size Ø Shank Ø Neck Ø Neck Length Total Length Use with Insert Insert Ordering No. 2 Insert Style Screw Torx Key TAV 0250-3.75-0500 1/4 1/2.225 1 1/4 3 3/4 MS 06N
More informationTaeguTec has now launched brand new plunge milling operations; it is the ideal product for reducing cost and machining time.
www.tgutec.com New! New New NOW AVAIABE, NEW FOR T-I INE Plunge machining is one of the best solutions for boosting productivity that can perform both plunge as well as 9 milling in deep cavity machining
More informationKEO Cutters a name you can trust!
KEO utters a name you can trust! The world of cutting tools is changing every day. KEO utters is getting better every day as we implement and execute our continuous improvement strategies. This new catalog
More information11/15/2009. There are three factors that make up the cutting conditions: cutting speed depth of cut feed rate
s Geometry & Milling Processes There are three factors that make up the cutting conditions: cutting speed depth of cut feed rate All three of these will be discussed in later lessons What is a cutting
More informationSECO NEWS SUMMARY NEW IMAGE NEEDED (PHOTO SHOOT WEEK OF SEPTEMBER 12) THE TOOLS YOU RELY ON TO IMPROVE
SECO NEWS SUMMARY 2017-1 NEW IMAGE NEEDED (PHOTO SHOOT WEEK OF SEPTEMBER 12) THE TOOLS YOU RELY ON TO IMPROVE CONSTANT INVESTMENT IN CONSTANT IMPROVEMENT RE=6 CORNER RADIUS R217/220.28 CUTTER DURATOMIC
More informationChapter 24 Machining Processes Used to Produce Various Shapes.
Chapter 24 Machining Processes Used to Produce Various Shapes. 24.1 Introduction In addition to parts with various external or internal round profiles, machining operations can produce many other parts
More informationMiniature shoulder milling cutter with incomparable stability
MillLine Tungaloy eport No. 56-US TUCE-EC Miniature shoulder milling cutter with incomparable stability 2 TUCE-EC 2 TU TU TU TU TU TU TU T C C C C C C C C C CE- E- E- E- E- E- E- E- E E E E E E E C ACCELEATED
More informationHIGH-PERFORMANCE, HIGH-PRECISION HOLEMAKING TOOLS SECO FEEDMAX -P & PERFOMAX
HIGH-PERFORMANCE, HIGH-PRECISION HOLEMAKING TOOLS SECO FEEDMAX -P & PERFOMAX HARNESS THE POWER OF SECO HOLEMAKING GAIN THE TOOLS AND EXPERTISE TO OPTIMIZE PRODUCTIVITY WHAT YOU NEED TO BE YOUR BEST FEEDMAX
More information9605 with MICROFORM TECHNOLOGY It s Simple. The Toughest Cutting Edge.
with MICROFORM TECHNOLOGY It s Simple. The Toughest Cutting Edge. NEW TURNING GRADE FOR DIFFICULT-TO-MACHINE MATERIALS LESS SCRAP. LESS FAILURE. LESS STRESS. MAKE US PROVE IT 960. YOUR ANSWER TO DIFFICULT-TO-MACHINE
More informationPowerful solutions. for your windmill production
Powerful solutions for your windmill production Do you need to boost productivity? Invite a yellow coat. Windmills are fantastic, producing energy from an endless source without waste. Their increasing
More informationAMERICAN MADE GLOBALLY RENOWNED NEW PREMIUM TOOL LINE! HIGH PERFORMANCE END MILLS FOR TIGHT TOLERANCE FINISHING OF FERROUS MATERIALS
NEW PREMIUM TOOL LINE! AMERICAN MADE GLOBALLY RENOWNED HIGH PERFORMANCE END MILLS FOR TIGHT TOLERANCE FINISHING OF FERROUS MATERIALS www.conicalendmills.com www.globalcuttingtools.com TIGHT TOLERANCE FINISHING
More informationArCut X for brilliant surfaces in next to no time
passion for precision ArCut X for brilliant surfaces in next to no time New: ToolExpert ArCut X cutting data calculator ArCut X is a productivity booster for finishing with excellent surface quality [
More informationNew WMT Grooving Geometry PH Geometry
Page - - New WMT Geometry PH Geometry WIDIA has added the top-selling chipmaker geometry to the WMT platform - the PH geometry. Previously under the Manchester brand, the chipmaker geometry is a high performance
More informationFeatures. High Positive Rake Angle. Multi-Side Grinding. High Speed, High Feed Rate. Economical
Engraving This is a revolutionary new concept of engraving tools with indexable carbide inserts. They offer you the ability to produce HIGH QUAITY ENGRAVING in most materials. The latest coated carbide
More informationIndexable endmill for high precision finishing
MillLine Tungaloy Report No. 431-US BALLFINISH-NOSE Indexable endmill for high precision finishing ACCELERATED MACHINING MillLine Excellent surface finish and stable machining due to secure clamping and
More information20 LEAD FACE MILL SERIES DM6G, DM5G
20 LEAD FACE MILL SERIES DM6G, DM5G Diameters Cutting Edge Length Insert Corner 1.500" to 8.000".230".030"R Facing Lead Angle Coolant Thru K H 70º.23 D3 D 1 D 2 D 3 Coolant Thru Effective Cutter Number
More informationSGS Carbide Tool set to launch Series 33 high performance end mills at EMO
SGS Carbide Tool (UK) Ltd 10 Ashville Way Wokingham Berkshire RG41 2PL Tel: 01189 795200 Fax: 01189 795295 www.sgstool.com Ref Series 33 August 2013 SGS Carbide Tool set to launch Series 33 high performance
More information+1-508-653-8897 800-992-4766 www.toolmex.com Dear Valued Customers, The TMX Team have broadened our line of round cutting tools and holders to ensure that you have the productivity tools that you need
More information2018 PRICE LIST SOLID CARBIDE THREAD MILLS
2018 PRICE LIST SOLID CARBIDE THREAD MILLS NORTH AMERICAN TOOL HISTORY & OVERVIEW North American Tool was founded in 1986, by the father and son team of Kenyon Y. Taylor and Roger K. Taylor. Working in
More informationSTUB ACME - INTERNAL AND EXTERNAL
STUB ACME - INTERNAL AND EXTERNAL SOLID CARBIDE SINGLE PROFILE ACME Q A 29º B C S Solid carbide for maximum tool rigidity coating for increased performance Single start threads only SPECIALTY PORT - CAVITY
More informationChapter 24. Machining Processes Used to Produce Various Shapes: Milling
Chapter 24 Machining Processes Used to Produce Various Shapes: Milling Parts Made with Machining Processes of Chapter 24 Figure 24.1 Typical parts and shapes that can be produced with the machining processes
More informationAXD TOOLS NEWS. Multi functional milling cutter for high speed & performance machining of aluminum and titanium alloys. B116E
TOOLS NEWS For Machining of Aluminium and Titanium Alloys AXD 2014.01 Update B116E Multi functional milling cutter for high speed & performance machining of aluminum and titanium alloys. For Machining
More informationEMP01. Indexable Milling Tools. Square shoulder milling tools B 88. Kr:90 o. Specification of tools. Spare parts. EMP01 Straight shank.
Milling Tools Kr:90 o Step shoulder Slot milling Ramp milling Helical machining Plunge milling EMP01 Straight shank Specification of tools EMP01 Straight shank Stock Basic dimensions(mm) ØD ød L L1 apmax
More informationMission Statement. 2005, Manchester Tool Company. All rights reserved.
Mission Statement Manchester Tool Company shall provide tooling systems to the metal cutting and similar industries, specializing in cutoff, grooving and complimentary niche products. We are dedicated
More informationCoroMill QD. High-security groove milling
CoroMill QD High-security groove milling The main challenge in groove milling is usually chip evacuation, especially when machining deep and narrow grooves. CoroMill QD is the first cutter of its kind
More informationEXTREME VERSATILITY. SHEAR POWER. POW. R. FEED M9 SERIES FRACTIONAL CATALOG. More slicing power. More profit by the slice.
EXTREME VERSATILITY. SHEAR POWER. POW. R. FEED M9 SERIES FRACTIONAL CATALOG More slicing power. More profit by the slice. CONTENTS: Redefining high performance and versatility. Get chatter-free machining,
More informationSilent Tools TM Productivity with slender tools
Silent Tools TM Productivity with slender tools Reducing vibration in focus Vibration-prone operations pose a constant threat to productive and secure machining, especially when dealing with long overhangs
More informationTungsten Carbide End Mills UNIMAX Series
Tungsten Carbide End Mills UNIMAX Series Diamond Coated 2 Flute UDC Series NEW NEW UDCBF UDCLBF UDCB UDCLB UDCLRS High-grade Ball End Mills High-grade Long Neck Ball End Mills Ball End Mills Long Neck
More informationIntroducing a comprehensive range of New Indexable Thread Milling Tools and New Thread Milling Software for Tool Selection and CNC Programming
Januar 19, 2015 Page - 1 - Introducing a comprehensive range of New Indexable Tools and New Software for Tool Selection and CNC Programming TM24 Series TM25 Series TM40 Series TM41 Series KTMD-U Series
More informationAUTOMATED MACHINE TOOLS & CUTTING TOOLS
CAD/CAM COURSE TOPIC OF DISCUSSION AUTOMATED MACHINE TOOLS & CUTTING TOOLS 1 CNC systems are used in a number of manufacturing processes including machining, forming, and fabrication Forming & fabrication
More informationAutomotive. Tooling Solutions. Providing Optimal Tooling Solutions for Automotive Machining
Automotive Tooling Solutions Providing Optimal Tooling Solutions for Automotive Machining Crankcase Cylinder Heads Crankshafts Camshafts Connecting Rods Valve Bodies Synchronizer Gears Main Shafts CVT
More informationNOW AVAILABLE FOR LINE, A BRAND NEW CHIP SPLITTER INSERT FOR TOP PRODUCTIVITY WITH REDUCED CUTTING FORCE
New The Splitter PKT 1204 PER-SM New New PKT 1705 PER-SM NHX 160708R-SM NOW VILLE FOR & LINE, RND NEW CHIP SPLITTER INSERT FOR TOP PRODUCTIVITY WITH REDUCED CUTTING FORCE TaeguTec has launched a new line
More information8029 S 200th St. Kent, WA USA Ph: Fax:
8029 S 200th St. Kent, WA 98032 USA Ph: 253-872-7050 Fax: 253-395-0230 1 GENERAL INFORMATION Rottler CBN and PCD Inserts are laser marked with our part number on one side. On single sided inserts, the
More informationTypical Parts Made with These Processes
Turning Typical Parts Made with These Processes Machine Components Engine Blocks and Heads Parts with Complex Shapes Parts with Close Tolerances Externally and Internally Threaded Parts Products and Parts
More informationMETRIC THREAD MILLS SINGLE PROFILE (SPTM) - SOLID CARBIDE. Scientific Cutting Tools, Inc. Q A C OAL 60º THREAD MILLS METRIC
METRIC SINGLE PROFILE (SPTM) - SOLID CARBIDE METRIC Q A B 60º C S With just 19 varieties of Thread Mills, fine and coarse threads ranging from M1.2 to M30+ can be milled SPECIALTY PORT - CAVITY INDEXABLE
More informationINNOVATIONS CATALOGUE HARVI III Ball Nose
www.kennametal.com INNOVATIONS CATALOGUE HARVI III Ball Nose HARVI III Ball Nose High-Performance Solid Carbide End Mills Primary Application HARVI III Ball Nose tooling takes high-performance profiling,
More informationFeatures. High Positive Rake Angle. Multi-Side Grinding. High Speed, High Feed Rate. Economical
Engraving This is a revolutionary new concept of engraving tools with indexable carbide inserts. They offer you the ability to produce HIGH QUAITY ENGRAVING in most materials. The latest coated carbide
More informationEnd Mills 4. Cutting Tools 1 (Cont d) End-mills (Cont d)
Outline Review of Milling Cutting Tools Milling Milling Operations Workpiece Materials Tool Selection Machining Tips Toolholders Fixtures Cutting Tools HSS tools Coated (TiN, Al O 3, TiAlN,...) versions
More informationMetal Drilling.
101 ENGINEERED FOR CONTROLLED PRECISION AND SPEED The IRWIN line of metal drill bits offers of solution for every professional application. Each metal drill bit is made of high speed steel with high precision-cut
More informationPROMOTIONS2014. Valid from February 17 to June 30,
PROMOTIONS2014 Valid from February 17 to June 30, 2014 www.iscarmetals.com Double-Sided Profiling Inserts with Six.250" Corner Radii The HELIDO H606 line is an economical tool and insert system which features
More informationLecture 15. Chapter 23 Machining Processes Used to Produce Round Shapes. Turning
Lecture 15 Chapter 23 Machining Processes Used to Produce Round Shapes Turning Turning part is rotating while it is being machined Typically performed on a lathe Turning produces straight, conical, curved,
More informationDouble-sided positive insert for semi-finishing to finishing
MillLine Tungaloy Report No. 508-US DOMINI-MILL Double-sided positive insert for semi-finishing to finishing ACCELERATED MACHINING MillLine DoMini-Mill features the advantage of an economical 6-cornered
More informationCUTTING TOOLS FROM SANDVIK COROMANT. Small part machining TURNING PARTING AND GROOVING THREADING MILLING DRILLING
CUTTING TOOLS FROM SANDVIK COROMANT Small part machining TURNING PARTING AND GROOVING THREADING MILLING DRILLING Table of contents Introduction 2 Sliding head machines 4 Ordering information 55 Application
More informationCylindrical shank version Indexable Insert Endmill
Cylindrical shank version Indexable Endmill ø1 - ø 1 ød ST-FCM1-0 -FCM- 0 -FCM0-0 ST-FCM0-0 ST-FCM0- ST-FCM- -FCM- -FCM- 1 1 ød 1 0 0 1 17 0 0 0 70 1 ARG00 ARG00 ARG00 ARG0 ARG0 CATAOG No. =The ength of
More informationBASIC TECHNICAL INFORMATION FOR REAMERS FLUTE STYLES
BASIC TECHNICAL INFORMATION FOR HANNIBAL CARBIDE would like to inform you of some basic technical knowledge regarding reamers. Following these guidelines will reduce overall set-up time, while increasing
More informationFUNDAMENTAL MANUFACTURING PROCESSES CUTTING TOOL GEOMETRIES MUSIC UP AND UNDER NARRATION (VO): PRECISION MANUFACTURING.
FUNDAMENTAL MANUFACTURING PROCESSES CUTTING TOOL GEOMETRIES SCENE 1. CG: FBI warning SCENE 2. Tape 40, 01:00:00-01:00:12 ANI: SME logo SCENE 3. tape 25, 01:01:06-01:01:20 series opening title: FUNDAMENTAL
More information