OD TURNING HOLDERS-MCLNR/L, ACLNR/L MADE IN THE. Right Hand Model. Left Hand. Model. Increase Insert Life!

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "OD TURNING HOLDERS-MCLNR/L, ACLNR/L MADE IN THE. Right Hand Model. Left Hand. Model. Increase Insert Life!"

Transcription

1 HUK JWS LTHE WORKHOLDING OD TURNING HOLDERS-MLNR/L, LNR/L OD TURNING TOOLHOLDER INDEX MDE IN THE US MHINE VISES VISE JWS RETENTION KNOS ER, D, TG OLLETS TOOLHOLDERS TP HOLDERS INDEXLE DRILLS TURNING & ORING ENDMILLS, DRILLS TPS & REMERS RSIVES MESURING TOOLS MRO & SFETY FLT STOK/DRILL ROD MLNR/L - Side & End utting Offset Using NMG, NM, NG_ & NM_ type inserts TO-LNR12-3 TO-LNR16-3 TO-LNR12-4 TO-LNR16-4 -Type Toolholders LNR/L NMG Inserts on Pages OL MLNR/L-124 3/4 SQ TH-110 TH-210 $7.4 NMG-43 MLNR/L SQ TH-1110 TH-2110 $4.32 NMG-43 MLNR/L-164D 1 SQ 6 TH-111 TH-211 $4.32 NMG-43 MLNR/L-204D 1-1/4 SQ 6 TH-1120 TH-2120 $9.67 NMG-43 MLNR/L-84D 1 X 1-1/4 6 TH-112 TH-212 $71.60 NMG-43 NMG Inserts on Pages TO-LNL12-3 TO-LNL16-3 TO-LNL12-4 TO-LNL16-4 b h h1 l1 f pplicable Insert N 32 _ N 32 _ N 43 _ N 43 _ TO-ELS32 TO-ELS32 TO-LS42 $.42 TO-LS42 $ Master atalog OD Toolholder Index Holder Type Page # MLNR/L 314 MRNR/L 31 MDPNN 31 MSDNN 31 MDJNR/L 316 MTNR/L 316 MTENNS 317 MTFNR/L 317 MTGNR/L 317 EXTR HRDWRE ISN-433 ISN-433 ISN-433 ISN-433 ISN-433 TO-P3 TO-P3 TO-P4 TO-P4 Holder Type Page # MTJNRS/L 318 MVJNR/L 318 MWLNR/L 319 SLR/L 319 SDJR/L 320 SSDN 320 SVJR/L 320 SWLR/L 320 MIRO 100 RIDE 322 L-20 L-20 L-20 L-20 L-20 TO-S3 TO-S3 TO-S4 TO-S4 MDE IN THE US Wrench

2 OD TURNING HOLDERS-MLNR/L, MDPNN, MSDNN MRNR/L 1 Side utting, Offset Using NMG, NM, NG_ & NM_ type inserts MDE IN THE US LTHE HUKS LIVE ENTERS MDPNN 27. Side utting Straight Using DNMG, DNM, DNG_ & DNM_ type inserts NMG Inserts on Pages OL Price Uses Inserts MRNR/L-124 3/4 SQ TH-1130 TH-2130 $1.06 NMG-43 MRNR/L-164D 1 SQ 6 TH-113 TH-213 $4.32 NMG-43 MRNR/L-16D 1 SQ 6 TH-1140 TH-2140 $6.19 NMG-4 MRNR/L-20D 1-1/4 SQ 6 TH-114 TH-214 $71.60 NMG-4 DNMG Inserts on Pages 327 OL Neutral Hand EXTR HRDWRE ISN-433 ISN-433 ISN-33 $3.38 ISN-33 $3.38 MDPNN-164D 1 SQ 6 TH-1170 $81.04 DNMG-43 MDPNN-16D 1 SQ 6 TH-117 $97.2 DNMG-4 MDPNN-204D 1-1/4 SQ 6 TH-1180 $89.74 DNMG-43 MDPNN-20D 1-1/4 SQ 6 TH-118 $ DNMG-4 MDPNN-8D 1 X 1-1/4 6 TH-1190 $97.2 DNMG-4 IDSN-33 $3.80 IDSN-33 $3.80 IDSN-33 $3.80 EXTR HRDWRE L-12 L-12 L-12 L-12 XNS-8 XNS-8 MDE IN THE US VISE JWS VISE ESSORIES STRIGHT SHNK OLLET HOLDERS TP HOLDERS DRILL HUKS RIDE INSERTS THREDING/GROOVING MSDNN 4 Side utting Straight Using SNMG, SNG, SNM & SNM_ type inserts SNMG Inserts on Pages 329 OL Neutral Hand MSDNN-103 /8 SQ TH-119 $44.87 SNMG-33 MSDNN-123 3/4 SQ TH-1200 $1.06 SNMG-33 MSDNN-124 3/4 SQ TH-120 $1.06 SNMG-43 MSDNN-164D 1 SQ 6 TH-1210 $4.32 SNMG-43 MSDNN-16D 1 SQ 6 TH-121 $6.19 SNMG-4 ISSN-322 $1.70 ISSN-322 $1.70 ISSN-433 $2.70 ISSN-433 $2.70 ISSN-33 $3.20 EXTR HRDWRE NL-34 NL-34 MDE IN THE US L Master atalog 31 UTTING TOOLS MHINERY PREISION TOOLS DEURRING OOLNT/FLUIDS TOOL STORGE

3 HUK JWS LTHE WORKHOLDING OD TURNING HOLDERS-MDJNR/L, DJNR/L & MTNR/L MDJNR/L -3 Side utting Offset Using DNMG, DNM, DNG_ & DNM_ type inserts MDE IN THE US MHINE VISES VISE JWS RETENTION KNOS ER, D, TG OLLETS TOOLHOLDERS TP HOLDERS DNMG Inserts on Pages 327 -TYPE TOOLHOLDERS DJNR/L OL MDJNR/L-124 3/4 SQ TH-110 TH-210 $79.14 DNMG-43 MDJNR/L-164D 1 SQ 6 TH-11 TH-21 $6.16 DNMG-43 MDJNR/L-204D 1-1/4 SQ 6 TH-1160 TH-2160 $89.74 DNMG-43 MDJNR/L-84D 1 X 1-1/4 6 TH-116 TH-216 $97.2 DNMG-43 Quick hange EXTR HRDWRE L-20 L-20 L-20 INDEXLE DRILLS TURNING & ORING ENDMILLS, DRILLS TPS & REMERS RSIVES MESURING TOOLS MRO & SFETY FLT STOK/DRILL ROD DNMG Inserts on Pages 327 TO-DJNR12-3 TO-DJNR16-3 TO-DJNR12-4 TO-DJNR16-4 MTNR/L TO-DJNL12-3 TO-DJNL16-3 TO-DJNL12-4 TO-DJNL Side utting Straight Using TNMG, TNMP, TNG_ b h h1 r1 f pplicable Insert DN 33 _ DN 33 _ DN 43 _ DN 43 _ TO-ELSD32 TO-ELSD32 TO-LSD42 $7.26 TO-LSD42 $ Master atalog OL MTNR/L-123 3/4 SQ 4 TH-1220 TH-2220 $1.06 TNMG-33 MTNR/L-164D 1 SQ 6 TH-122 TH-222 $4.32 TNMG-43 TO-PS3 N/ TO-PS3 N/ TO-P4 TO-P4 TO-S3 TO-S3 TO-S4 TO-S4 EXTR HRDWRE ITSN-322 MDE IN THE US NL-34 Wrench

4 OD TURNING HOLDERS-MTENNS, MTFNR/L, MTGNR/L MTENN 30 Side utting Straight Using TNMG, TNM, TNG_ MTFNR/L 0 End utting Solid Steel ar Using TNMG, TNM, TNG_ OL Neutral Hand MTENN-103 /8 SQ 4 TH-1230 $44.87 TNMG-33 MTENN-123 3/4 SQ 4 TH-123 $1.06 TNMG-33 MTENN-124 3/4 SQ 4 TH-1240 $1.06 TNMG-43 MTENN-164D 1 SQ 6 TH-124 $4.32 TNMG-43 MTENN-83 1 x 1-1/4 6 TH-120 $48.40 TNMG-33 MDE IN THE US EXTR HRDWRE MDE IN THE US $).74 LTHE HUKS LIVE ENTERS VISE JWS VISE ESSORIES STRIGHT SHNK OLLET HOLDERS TP HOLDERS DRILL HUKS MTGNR/L 0 Side utting Offset Using TNMG, TNM, TNG_ OL MTFNR/L-123 3/4 SQ TH-12 TH-22 $1.06 TNMG-33 MTFNR/L SQ TH-1260 TH-2260 $4.32 TNMG-33 MTFNR/L-164D 1 SQ 6 TH-126 TH-226 $4.32 TNMG-43 OL EXTR HRDWRE MTGNR/L-123 3/4 SQ TH-1270 TH-2270 $1.06 TNMG-33 MTGNR/L SQ TH-127 TH-227 $4.32 TNMG-33 MTGNR/L-164D 1 SQ 6 TH-1280 TH-2280 $4.32 TNMG-43 EXTR HRDWRE MDE IN THE US Master atalog 317 RIDE INSERTS THREDING/GROOVING UTTING TOOLS MHINERY PREISION TOOLS DEURRING OOLNT/FLUIDS TOOL STORGE

5 HUK JWS LTHE WORKHOLDING MHINE VISES VISE JWS RETENTION KNOS ER, D, TG OLLETS TOOLHOLDERS TP HOLDERS OD TURNING HOLDERS-TGNR/L, MTJNR/L, MVJNR/L -Type Toolholders TGNR/L TO-TGNR12-3 TO-TGNR16-3 TO-TGNR16-4 MTJNR/L -3 Side utting Offset Using TNMG, TNM, TNG_ TO-TGNL12-3 TO-TGNL16-3 TO-TGNL16-4 b h h1 r1 f Quick hange pplicable Insert 1 TN 33 _ TN 33 _ TN 43 _ TO-LST317 $.00 TO-LST317 $.00 TO-LST42 $7.14 TO-P-4 TO-P3 TO-P3 TO-P4 MDE IN THE US EXTR HRDWRE TO-S3 TO-S3 TO-S4 Wrench INDEXLE DRILLS TURNING & ORING ENDMILLS, DRILLS TPS & REMERS RSIVES MESURING TOOLS MRO & SFETY FLT STOK/DRILL ROD MVJNR/L -3 Side utting Offset Using VNMG, VNM, VNG_ & VNM_ type inserts Master atalog OL MTJNR/L-123 3/4 SQ TH-128 TH-228 $1.06 TNMG-33 MTJNR/L-164D 1 SQ 6 TH-1290 TH-2290 $4.32 TNMG-43 MTJNR/L-204D 1-1/4 SQ 7 TH-129 TH-229 $9.67 TNMG-43 VNMG Inserts on Page 329 OL MVJNR/L-123 3/4 SQ TH-1300 TH-2300 $83.49 VNMG-33 MVJNR/L SQ TH-130 TH-230 $8.11 VNMG-33 MVJNR/L-164D 1 SQ 6 TH-1310 TH-2310 $8.11 VNMG-43 MVJNR/L-203D 1-1/4 SQ 6 TH-131 TH-231 $94.37 VNMG-33 MVJNR/L-204D 1-1/4 SQ 6 TH-1320 TH-2320 $7.87 VNMG-43 EXTR HRDWRE IVSN-323 $2.24 IVSN-323 $2.24 IVSN-433 IVSN-323 $2.24 IVSN-433 MDE IN THE US L-30 L-30 L-30 L-30 L-30

6 OD TURNING HOLDERS-MWLNR/L, WLNR/L MWLNR/L - Side & End utting Offset Using WNGG, WNM, & WNMG type inserts WNMG Inserts on Pages 330 -TYPE TOOLHOLDERS WLNR/L OL MWLNR/L-123 3/4 SQ TH-132 TH-232 $1.06 WNMG-33 MWLNR/L-124 3/4 SQ TH-1330 TH-2330 $1.06 WNMG-43 MWLNR/L SQ 6 TH-133 TH-233 $4.32 WNMG-33 MWLNR/L-164D 1 SQ 6 TH-1340 TH-2340 $4.32 WNMG-43 MWLNR/L-204D 1-1/4 SQ 6 TH-130 TH-230 $9.67 WNMG-43 Quick hange EXTR HRDWRE IWSN-323 $2.2 IWSN-433 $3.40 IWSN-323 $2.2 IWSN-433 $3.40 IWSN-433 $3.40 MDE IN THE US LTHE HUKS LIVE ENTERS VISE JWS VISE ESSORIES STRIGHT SHNK OLLET HOLDERS TP HOLDERS DRILL HUKS WNMG Inserts on Pages 330 b h h1 r1 f SLR/L - Side & End utting, Offset 7 Relief ngle, S- Using MT type inserts TO-WLNR12-3 TO-WLNR16-3 TO-WLNR12-4 TO-WLNR16-4 For MT Inserts, Please See Page 331 OL TO-WLNL12-3 TO-WLNL16-3 TO-WLNL12-4 TO-WLNL16-4 F pplicable Inserts WN 33 _ WN 33 _ WN 43 _ WN 43 _ TO-LSW312 $8.9 TO-LSW312 $8.9 TO-LSW42 $9.18 TO-LSW42 $9.18 Wrench TO-P3 TO-P3 TO-P4 TO-P4 TO-S3 TO-S3 TO-S4 TO-S4 Price Uses Inserts MDE IN THE US Master atalog 319 Torx Key Insert SLR/L L06-2J 3/8 SQ TH-10 TH-20 $43.43 MT-21. T-7 TS-2.4-6M1 SLR/L L08-3 1/2 SQ TH-110 TH-210 $43.43 MT-32. T-1 TS M1 SLR/L L10-3 /8 SQ TH-11 TH-21 $44.4 MT-32. T-1 TS M1 SLR/L L12-3 3/4 SQ TH-120 TH-220 $2.86 MT-32. T-1 TS M1 SLR/L L16-3D 1 SQ TH-12 TH-22 $6.34 MT-32. T-1 TS M1 RIDE INSERTS THREDING/GROOVING UTTING TOOLS MHINERY PREISION TOOLS DEURRING OOLNT/FLUIDS TOOL STORGE

RETENTION KNOBS/PULL STUDS

RETENTION KNOBS/PULL STUDS RETENTION KNOS/PULL STUDS LIVE ENTERS LTHE HUKS MDE IN THE US QUNTITY DISOUNTS FOR END USERS! uy 0 or more of any retention knob and receive a 0% Discount! VISE ESSORIES VISE WS We offer arguably the largest

More information

Chuck. Weight (lbs) Model Style. 3 Jaw Chuck 6 Jaw Chuck. Price Each. Weight (lbs) Max. RPM

Chuck. Weight (lbs) Model Style. 3 Jaw Chuck 6 Jaw Chuck. Price Each. Weight (lbs) Max. RPM MANUAL SROLL HUKS Ajust Tru Style MODEL ATS BUK HUK is continuously striving to make its products better so that your production can be more efficient! Buck has engineered and built some of the finest

More information

Universal grade for steel turning High reliability and versatility due to our NEW Absotech Platinum technology TOOLING NEWS E-135

Universal grade for steel turning High reliability and versatility due to our NEW Absotech Platinum technology TOOLING NEWS E-135 TOOLING NEWS E-135 New Coated Grade for General Steel Turning Universal grade for steel turning High reliability and versatility due to our NEW Absotech Platinum technology Coated Grade for Steel Turning

More information

TOP NOTCH COMPATIBLE GROOVING INSERTS MADE IN THE. Coolant Port. Min Bore MADE IN THE USA. Toolholder/ Boring Bar. Left or. Right Hand.

TOP NOTCH COMPATIBLE GROOVING INSERTS MADE IN THE. Coolant Port. Min Bore MADE IN THE USA. Toolholder/ Boring Bar. Left or. Right Hand. TOP NOTCH COMPATILE GROOVING INSERTS SMALL HOLE THREADING & GROOVING ARS DEEP GROOVING-SINGLE ENDED INSERTS Gage Diameter 0.375 0.094 2.39 0.250 0.195 0.344 0.505 0.125 3.18 0.250 0.195 0.344 0.505 0.189

More information

CAT.AC6040M/AC6030M.3/15. Carbide Grades for Turning AC6030M / AC6040M. AC6030M & AC6040M Grades for machining stainless steels M

CAT.AC6040M/AC6030M.3/15. Carbide Grades for Turning AC6030M / AC6040M. AC6030M & AC6040M Grades for machining stainless steels M CAT./.3/15 Carbide Grades for Turning / & Grades for machining stainless steels M Features & Benefits s new Absotech platinum PVD grade coating, with fine grains and high hardness, achieved 1.5 times higher

More information

PRODUCT SELECTION GUIDE - TOOLHOLDERS ADAPTERS

PRODUCT SELECTION GUIDE - TOOLHOLDERS ADAPTERS PRODUT SELETION GUIDE - TOOLHOLDERS www.thinbit.com/qr7-1 Scan this code for additional information. DPTERS dapters Square and round adapters Use for boring bars and solid carbide tooling THINIT ROUND

More information

ALORIS TOOL TECHNOLOGY CO., INC. REV 1/12. All Aloris products are

ALORIS TOOL TECHNOLOGY CO., INC. REV 1/12. All Aloris products are LORIS TOOL TECHNOLOGY CO., INC. 22 CTLOG The Originator of Quick Change Tooling REV ll loris products are proudly made in the US. TLE OF CONTENTS INTRODUCING LORIS INDEXLE TOOL OSTS & SETS New roduct uilt

More information

ROUND JAWS- AMERICAN STANDARD TONGUE & GROOVE. Tongue to Front J. Hght Inch A. Pie Dia B

ROUND JAWS- AMERICAN STANDARD TONGUE & GROOVE. Tongue to Front J. Hght Inch A. Pie Dia B HUK WS LTH WORKHOLIN MHIN VISS VIS WS RTNON KNOS R,, T OLLTS TOOLHOLRS TP HOLRS INXL RILLS TURNIN & ORIN NMILLS, RILLS TPS & RMRS RSIVS MSURIN TOOLS MRO & STY LT STOK/RILL RO ROUN WS- MRIN STNR TONU &

More information

APPLICATION REFERENCE

APPLICATION REFERENCE O.D./I.D. S Insert Shown in Right Hand Toolholder D THINIT LGI093D2.240" +.0 -.0 FRONT RKE: RIDE: Primary 10 honed, Secondary 15 HIGH SPEED STEEL: 15 K LERNE: 2-1/2 both sides SIDE LERNE: 0 both sides

More information

AC6020M /AC6030M / AC6040M

AC6020M /AC6030M / AC6040M CAT.AC6000MBROCHURE.12/16 Electric Carbide, Inc. / /, & Grades for machining stainless steels M & Features & Benefits s new Absotech platinum CVD grade coating, with fine grains and high hardness, achieved

More information

Briney. Tooling Systems INDEX

Briney. Tooling Systems INDEX ITEM PG. bout riney...2 Shank ata...3 Shrink Fit enefits...4 Shrinker dvantages...5 Induction Heating Units...6 Thermax & ccessories...7-8 Tru-Therm & ccessories...9-10 Induction Unit hanging System...11

More information

tel fax

tel fax distributed by : Newman Tools Inc. Tel 1-800-465-1384 Fax 1-800-605-2442 Tel 613-836-6776 Fax 613-836-9070 www.newmantools.com thread mills - product overview Thread Mills cut a thread using helical interpolation.

More information

CA55 05/15/25/35. Series CA5505 CA5515 CA5525 CA5535. Innovative CVD Coated Carbides for Steel Machining CP154-1-E. High speed.

CA55 05/15/25/35. Series CA5505 CA5515 CA5525 CA5535. Innovative CVD Coated Carbides for Steel Machining CP154-1-E. High speed. CP1541E CA55 05/15/25/35 Series Innovative Carbides for Steel Machining High speed.long tool life CA5505 Light Interrupted CA5515 Interrupted.General use CA5525 Heavy Interrupted CA Innovative Carbides

More information

NEW. Excellent tool life with new-generation PVD coating! Keeping the Customer First. New PVD coated grade for stainless steel turning

NEW. Excellent tool life with new-generation PVD coating! Keeping the Customer First. New PVD coated grade for stainless steel turning Keeping the Customer First Tungaloy Report No. 399-E New PVD coated grade for stainless steel turning NEW TUNGALOY Excellent tool life with new-generation PVD coating! TUNGALOY TUNGALOY Features Increased

More information

CNC BAR PULLERS EASILY AUTOMATE ANY CNC LATHE FOR LIGHTS-OUT PRODUCTION

CNC BAR PULLERS EASILY AUTOMATE ANY CNC LATHE FOR LIGHTS-OUT PRODUCTION N R PULLERS ESILY UTOMTE NY N LTHE FOR LIGHTS-OUT PRODUTION ROYL OMPT N R PULLERS utomate ny N Lathe ll parts subject to wear are hardened for strength and durability. q Great for use with small N lathes

More information

R8 Tool Holders MADE IN EUROPE

R8 Tool Holders MADE IN EUROPE R8 Tool Holders MADE IN EUROPE TMX R8 HOLDERS AND KNEE MILLS the perfect pairing of reliability and tradition Image courtesy of the Hardinge Group Though developed in 1936, the knee mill has made a recent

More information

Update B158J New Chip Breaker Inserts for Turning Expanded Inserts

Update B158J New Chip Breaker Inserts for Turning Expanded Inserts 2009.4 Updte B158J Expnded s New Chip Breker s for Turning Breker Offers the best performnce for utomotive prts pplictions! ysmooth chip control even t vried depths of cut, feeds nd cutting speeds! New

More information

Jet-Stream Modular Carbide & Steel Boring Bar Instructions Manual

Jet-Stream Modular Carbide & Steel Boring Bar Instructions Manual Workpiece Rigidity 1 Work holding Use the proper chuck and jaws to hold the work-piece, to assure that the part is held with maximum rigidity and stability under cutting force. 2 Steady Rest Support When

More information

ALORIS TOOL TECHNOLOGY CO., INC. All Aloris products are

ALORIS TOOL TECHNOLOGY CO., INC. All Aloris products are ALORIS TOOL TECHNOLOGY CO., INC. 2 CATALOG The Originator of Quick Change Tooling All Aloris products are proudly made in the USA. INTRODUCING ALORIS INDEXABLE TOOL OSTS & SETS New roduct Built By The

More information

of the fence to cut multiple pieces up to 411 2" long. Then slide it into the fence for storage (inset).

of the fence to cut multiple pieces up to 411 2 long. Then slide it into the fence for storage (inset). f e a t u r e p r o j e c t djustable Miter Gauge Fence n adjustable fence and two simple stops provide quick, accurate setups when using a miter gauge. One of the simplest accessories you can add to the

More information

Phone (800) Fax (330)

Phone (800) Fax (330) atalog 101 1 Table of ontents asic Information dvantages of Quick hange Tooling...2 dvantages of PDQ Quick hange...3 PDQ Shank & Series information...5 Master Holders Morse Taper Holders...6 Milling Machine

More information

COLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS

COLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS COLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS ROYAL QUICK-GRIP MANUAL COLLET FIXTURES FOR 4TH AND 5TH AXIS APPLICATIONS q Unit is actuated via a hybrid mechanical/hydraulic mechanism.

More information

TABLE OF CONTENTS Master Catalog 5. Call Us Or Visit Our Website For Our Complete Selection! LATHE CHUCKS VISE JAWS STRAIGHT SHANK

TABLE OF CONTENTS Master Catalog 5. Call Us Or Visit Our Website For Our Complete Selection! LATHE CHUCKS VISE JAWS STRAIGHT SHANK TL OF ONTNTS WORKHOLING FOR LTHS JW ORING TOOLS Jaw oring Rings, oring Stars, nti acklash Rings 10 LTH WORKSTOPS orian N Spindle Workstop, U-STOP, Royal huck Stops 10-11 HR HUK JWS (TOP JWS) Hard Jaws

More information

COMPACT CNC BAR PULLERS Automate Any CNC Lathe

COMPACT CNC BAR PULLERS Automate Any CNC Lathe N ar Pullers OMPT N R PULLERS utomate ny N Lathe Great for use with small N lathes compact design minimizes tool interference. Very easy to setup and use. Unit can pull round, square, and hex stock. Flexible

More information

MILLING OF T-SLOTS. Excellent removal of chips, flushed by through coolant supply. In the UNITED STATES call us toll free HORN

MILLING OF T-SLOTS. Excellent removal of chips, flushed by through coolant supply. In the UNITED STATES call us toll free HORN MILLIN OF T-SLOTS Excellent removal of chips, flushed by through coolant supply. 1 MILLIN OF T-SLOTS MILLIN SHANK MU311.669 Material of shank: Carbide - iving a good vibration resistance for use with Insert

More information

Accessories. Scan these QR Codes Featured Video. Current Promotion

Accessories. Scan these QR Codes Featured Video. Current Promotion Current Promotion Scan these QR Codes Featured Video 211 TOOLJAW The Toolholder Clamp Champ Description BT30 Taper TOOLJAW BT35 Taper TOOLJAW BT40 Taper TOOLJAW BT45 Taper TOOLJAW BT50 Taper TOOLJAW CT30

More information

ROUND JAWS- 1.5 mm x 60 Serrations. FOR USE ON: Kitagawa, Samchully, Strong, MMK, SMW Autoblok, Howa & Hitachi-Seiki Chucks. Pie Dia B.

ROUND JAWS- 1.5 mm x 60 Serrations. FOR USE ON: Kitagawa, Samchully, Strong, MMK, SMW Autoblok, Howa & Hitachi-Seiki Chucks. Pie Dia B. HUK WS LTH WORKHOLIN MHIN VISS VIS WS ROUN WS- 1.5 mm x 60 Serrations FOR US ON: Kitagawa, Samchully, Strong, MMK, SMW utoblok, Howa & Hitachi-Seiki hucks M IN TH US 2 Round aws allow for complete gripping

More information

Shop Supplies. Catalog No.901C

Shop Supplies.  Catalog No.901C Catalog Workholding Tools Shop Supplies Machinery www.chinabestools.com Catalog No.90C Welcome to ESTOOL! We will try to be best supplier from China in Measuring Tools, Cutting Tools, Machinery and ccessories

More information

Addendum for the Installation of the Lingenfelter 10 Bolt Supercharger Pulley Hub Kit

Addendum for the Installation of the Lingenfelter 10 Bolt Supercharger Pulley Hub Kit Addendum for the Installation of the Lingenfelter 10 Bolt Supercharger Pulley Hub Kit PN: L250150309 Lingenfelter Performance Engineering 1557 Winchester Road Decatur, IN 46733 (260) 724-2552 (260) 724-8761

More information

No-Mar tip conversion/replacement procedure

No-Mar tip conversion/replacement procedure No-Mar tip conversion/replacement procedure This procedure can be used for customers who want to convert their legacy Delrin demount tips to the new No- Mar tips, or for customers that just need to replace

More information

WORKHOLDING SOLUTIONS

WORKHOLDING SOLUTIONS JERGENS WORKHOLING SOLUTIONS WORKHOLING SOLUTIONS Fixture Pro Multi-xis Quick hange Fixturing WORKHOLING SOLUTIONS SPEILTY FSTENERS LIFTING SOLUTIONS 2015 jergens, inc. IMG0915 15700 S. Waterloo Road.

More information

ROYAL ULTRA-PRECISION ER COLLETS " TIR

ROYAL ULTRA-PRECISION ER COLLETS  TIR ROYAL C EXPANDING COLLETS q Unlike chucks and most collets that grip the OD of a workpiece, C expanding collets are designed to grip on the ID of a part. q Accu-length design ensures precise workpiece

More information

3D SENSORS 2-in-1 3-AXIS EDGE FINDER & MEASURING INSTRUMENT.

3D SENSORS 2-in-1 3-AXIS EDGE FINDER & MEASURING INSTRUMENT. 3D SENSORS 2-in-1 3-AXIS EDGE FINDER & MEASURING INSTRUMENT www.haimer-usa.com HAIMER Sensors Benefits 1. No math needed Zero on the indicator = Zero on the machine control The sensor is pre-calibrated

More information

Inc. One Stop Tooling and Machine Shop. Our Mission

Inc. One Stop Tooling and Machine Shop. Our Mission PARTNER Inc. One Stop Tooling and Machine Shop Our Mission NTM is committed to providing the best possible service and products to our customers. Whether it s manufacturing special tooling, machining,

More information

MINI-LATHE QUICK CHANGE TOOL POST

MINI-LATHE QUICK CHANGE TOOL POST MINI-LATHE QUICK CHANGE TOOL POST Cutting and assembly details Machinists should familiarize themselves with the contents of this section before jumping in to the drawings. Many details are described here

More information

Wiper Inserts for Steel Turning

Wiper Inserts for Steel Turning Product Brochure Wiper s for teel Turning WE & WF Negative Wiper s in Carbide and Cermet NEW OLID ROUND OLUTION DRILLING OLUTION TURNING OLUTION MILLING OLUTION Two Ways to ave! 1) Buy 20 s, Get FREE (Promo

More information

Inc. One Stop Tooling and Machine Shop. Our Mission

Inc. One Stop Tooling and Machine Shop. Our Mission Inc. One Stop Tooling and Machine Shop Our Mission NTM is committed to providing the best possible service and products to our customers. Whether it s manufacturing special tooling, machining, or one of

More information

Spherical Buttons and Button Jig Feet

Spherical Buttons and Button Jig Feet Spherical uttons and Jig Feet SPHERIL RIUS LOTOR UTTONS Spherical uttons and utton Jig Feet SPHERIL RIUS LOTOR UTTONS provide single point contact f irregular surfaces and are manufactured f Press Fit

More information

TOOL HOLDER SYSTEMS FOR

TOOL HOLDER SYSTEMS FOR TOOL HOLDER SYSTEMS FOR HAAS OL-1 CNC OFFICE LATHE AND HAAS HPCL CNC TOOLROOM LATHE FOR ANY ADDITIONAL INFORMATION, OR INQUIRIES ON PURCHASING, CONTACT YOUR LOCAL HAAS FACTORY OUTLET ONLINE TECHNICAL INFORMATION

More information

TOOL HOLDERS Useful information:

TOOL HOLDERS Useful information: TOOL HOLERS Useful information: SISTEMI has always been known for the high quality of the products offered. Keywords of this success are the attention to production materials and the use of the most modern

More information

AR-15 Armorer s Essentials Kit. Product # Instructions # Revision: B

AR-15 Armorer s Essentials Kit. Product # Instructions # Revision: B AR-15 Armorer s Essentials Kit Product #156111 Instructions #1025769 Revision: B 1 INDEX 3 AR-15 Adjustable Receiver Link 3 Pivot Pin and Roll Pin Installation Tool 4 Mag well Vise Block 7 Upper Vise Block

More information

DT SERIES NL-NLX SERIES NT-NTX SERIES NZ-NZX SERIES ROTARY TOOLS

DT SERIES NL-NLX SERIES NT-NTX SERIES NZ-NZX SERIES ROTARY TOOLS DT SERIES NL-NLX SERIES NT-NTX SERIES NZ-NZX SERIES ROTARY TOOLS DT 2050-2550 (12-STATION TURRET) NL(X) 1500-3000 (16/20-STATION TURRET) NT(X) 1000-2000 SERIES (10-STATION TURRET) NT(X) 3100-3200 SERIES

More information

GRILLE GUARD SPRINTER VAN (EXCLUDES X4) INCLUDES MERCEDES, FREIGHTLINER AND DODGE PARTS LIST:

GRILLE GUARD SPRINTER VAN (EXCLUDES X4) INCLUDES MERCEDES, FREIGHTLINER AND DODGE PARTS LIST: PARTS LIST: 1 Grille Guard 8 12mm Hex Nuts 1 Driver/Left Side Frame Mounting Bracket 2 10-1.50mm x 25mm Button Head Bolts 1 Passenger/Right Side Frame Mounting Bracket 4 10mm x 20mm OD x 2mm Flat Washers

More information

DRC type. MagicDrill. High efficiency drill module. New lineup. Machining diameters: Ø7.94-Ø20.99 Machining depths: 3D,5D,8D. High efficiency.

DRC type. MagicDrill. High efficiency drill module. New lineup. Machining diameters: Ø7.94-Ø20.99 Machining depths: 3D,5D,8D. High efficiency. MagicDrill DRC type High efficiency drill module Larger cutting diameters now available High efficiency High reliability High feed rate High quality lineup SS-DRC (Straight Shank) Machining diameters:

More information

Proven Performance CARBIDE INSERTS. Proven Performance. Performance, Quality & Technology Will Turn Machining Into PROFIT!

Proven Performance CARBIDE INSERTS. Proven Performance. Performance, Quality & Technology Will Turn Machining Into PROFIT! Proven Performance CARBIDE INSERTS P S High Temp. Alloy Carbon Steel M Stainless Steel N Aluminum / Non Ferrous K Cast Iron U Proven Performance Performance, Quality & Technology Will Turn Machining Into

More information

ZODIAC 601 XL. Detail of outboard end. Full length recessed elevator trim tab. Detail of inboard end. Trim tab along left trailing edge of elevator.

ZODIAC 601 XL. Detail of outboard end. Full length recessed elevator trim tab. Detail of inboard end. Trim tab along left trailing edge of elevator. Full length recessed elevator trim tab. Detail of outboard end. Detail of inboard end. Trim tab along left trailing edge of elevator. Trim tab in neutral position 6-T-6 - Page 1 of 12 Drill out the middle

More information

IIHS LATCH Measurement Tool Set Drawings REV1. iihs.org

IIHS LATCH Measurement Tool Set Drawings REV1. iihs.org IIHS LTCH Measurement Tool Set Drawings REV1 iihs.org REV. DESCRIPTION DTE BY DD STORGE CSE. CHNGE IIHS LOGO. 2/1/2017 RGJ LTCH FORCE TOOL WITH DEPTH SHIELD SHEET 3-4, 9 WGNER INSTRUMENTS FDX100 WWW.WGNERINSTRUMEMTS.COM

More information

CVD coated grade for steel turning

CVD coated grade for steel turning Tungaloy Report No. 3-E5 CVD coated grade for steel turning New Line of chipbreakers for Heavy TUNGALOY Extremely stable ol life due amazing chipping resistance New Triple Technology! Provides a high level

More information

3850, Drum & Disc Brake Lathes. Parts Identification

3850, Drum & Disc Brake Lathes. Parts Identification 3850, 3860 Drum & Disc Brake Lathes Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for

More information

Installation Instructions

Installation Instructions VON DUPRIN Installation Instructions 98/9947WDC Concealed Vertical Rod Exit Device Wood Door Applications Devices covered by these instructions: 98/9947WDC Concealed Vertical Rod Device 98/9947WDC-F (Fire)

More information

Catalogue guide. MARIO PINTO SPA Strada delle Cacce Torino page 1 di 13

Catalogue guide. MARIO PINTO SPA Strada delle Cacce Torino   page 1 di 13 Catalogue guide MARIO PINTO SPA Strada delle Cacce 21-10135 Torino www.live-tooling.com www.mariopinto.it page 1 di 13 PRODUCTS MANUFACTURING PHILOSOPHY Our Live Tools are entirely developed, designed

More information

Price Each. Inch. Standard Set Short Stack FEATURES:

Price Each. Inch. Standard Set Short Stack FEATURES: HUK WS LTH WORKHOLIN MHIN VISS VIS WS RTNTION KNOS R,, T OLLTS TOOLHOLRS TP HOLRS W ORIN TOOLS W ORIN RINS No need to look all over the shop for a setup piece and waste time. Our jaw boring ring is essential

More information

Precision Milling Machine Vises. (Inch) (Inch) (Inch) Toolmaker s Vises. Jaw Depth

Precision Milling Machine Vises. (Inch) (Inch) (Inch) Toolmaker s Vises. Jaw Depth Precision Milling Machine Vises Vises & Accessories A B C D E F G H I J K L M N 17.01 4.63 9.25 6 2.05 18.74 3.87 2.87 1.50 1.75 4.84 0.69 7.5 0.71 79 277064 17.20 4.63 8.75 6 2.05 18.94 3.87 2.87 1.50

More information

Introduction To Automotive Technology

Introduction To Automotive Technology Introduction To Automotive Technology UNIT 4: BASIc hand Tools LESSON 2: TYPES OF SCREWDRIVERS AND PLIERS I. Screwdrivers A. The standard screwdriver has a straight blade for turning screws with a slot

More information

Linear Motion and Assembly Technologies Aluminum Framing /07. Die-Cast Foundation Brackets 3-10 & 3-11

Linear Motion and Assembly Technologies Aluminum Framing /07. Die-Cast Foundation Brackets 3-10 & 3-11 -0 Linear Motion and ssembly Technologies luminum Framing 91 500 1 /07 Section : Profile onnectors Overview One of the greatest strengths of the osch Rexroth structural aluminum framing system is the wide

More information

Laboratory for Manufacturing Systems Department of Mechanical Engineering and Automation University of Patras, Greece

Laboratory for Manufacturing Systems Department of Mechanical Engineering and Automation University of Patras, Greece COMPUTER NUMERICAL CONTROL OF MACHINE TOOLS Laboratory for Manufacturing Systems Department of Mechanical Engineering and Automation University of Patras, Greece Chapter 4: Tool Changing and Tool Registers

More information

15 Lead Angle D1~D9 MSRS15 MSE15 D2-D8 D9

15 Lead Angle D1~D9 MSRS15 MSE15 D2-D8 D9 15 1~9 15 MSE15 2~9 28 9 Heavy Milling Face Mill MonSteR M S R Square Mill Conventional Tools Metal removal rate is drastically increased Square (4edge) type Face Mill 15 Roughing takes place in one pass.

More information

Machine Shop Accessories

Machine Shop Accessories Machine Shop Accessories H215 H216 Notes Face Mill Holders Bright-Tools - CAT-40 Face Mill Holders Benefits of BRIGHT-TOOLS - Cat 40 Balanced to G2.5-20,000 RPM - Taper Tolerance - AT3 or Better - 56-58

More information

15L Slant-PRO TM CNC LATHE

15L Slant-PRO TM CNC LATHE 15L Slant-PRO TM CNC LATHE INDEX Product Overview p. 2 Specifications p. 3 Options p. 4 Workholding pp. 5-8 Toolholding pp. 9-12 Warranty p. 16 ENABLING YOUR IDEAS Tormach 15L Slant-PRO CNC Lathe PRODUCT

More information

LEXUS IS250/IS350 FRONT SPOILER Section I - Installation Preparation. Part Number: Section I - Installation Preparation.

LEXUS IS250/IS350 FRONT SPOILER Section I - Installation Preparation. Part Number: Section I - Installation Preparation. Section I - Instlltion Preprtion Prt Numer: 0854-53830 Section I - Instlltion Preprtion Kit Contents 3 Description Front spoiler Hrdwre g Instruction mnul Additionl Items Required For Instlltion Conflicts

More information

Techniks Certified Face Mill Arbors

Techniks Certified Face Mill Arbors Techniks Certified Face Mill Arbors Manufactured from H13 tool steel for performance and long life. Extended Length Face Mill Arbors CAT40, CAT50 now up to 12" gauge lengths H6 arbor tolerance reduces

More information

SCREWDRIVERS AND NUT DRIVERS

SCREWDRIVERS AND NUT DRIVERS SCREWDRIVERS AND NUT DRIVERS No toolbox would be complete without an assortment of screwdrivers. Stanley Proto has a complete line of professional screwdrivers in enough shapes, sizes, and tips to turn

More information

Turning and Boring Processes

Turning and Boring Processes Turning and Boring Processes Chapter 22 22.1 Introduction Turning is the process of machining external cylindrical and conical surfaces. Boring is a variant of turning were the machining results in an

More information

Chapter 22: Turning and Boring Processes. DeGarmo s Materials and Processes in Manufacturing

Chapter 22: Turning and Boring Processes. DeGarmo s Materials and Processes in Manufacturing Chapter 22: Turning and Boring Processes DeGarmo s Materials and Processes in Manufacturing 22.1 Introduction Turning is the process of machining external cylindrical and conical surfaces. Boring is a

More information

ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS ALUMINUM ELECTROLYTIC CAPACITORS Trimmed (Cut) or ormed Leads Please refer to page26 about the PCAP product spec. Radial lead type In order to identify correct part number for the processed lead product,

More information

NIKKEN ROTARY TABLES. Backlash Compensation. Carbide Worm Screw. Custom Bearings. Exceptional Brake Torque

NIKKEN ROTARY TABLES. Backlash Compensation. Carbide Worm Screw. Custom Bearings. Exceptional Brake Torque NIKKEN ROTARY TABLES Carbide Worm Screw Custom Bearings Nikken s Patented Ion Nitrided Worm Wheel Nikken s Rotary Tables are known worldwide for their long-term reliability and productivity. These benefits,

More information

SLOANE DARK LEANING BOOKCASE

SLOANE DARK LEANING BOOKCASE SLONE DRK LENING BOOKSE HRDWRE 4 - large bolts 10 - small bolts 1 - small screw 4 - medium screws 1 - large screw 2 - wall fittings 1 - wall strap 1 - plastic anchor 8 - wood dowels Thank you for purchasing

More information

PRODUCT OVERVIEW TOOLHOLDING AND WORKHOLDING

PRODUCT OVERVIEW TOOLHOLDING AND WORKHOLDING PRODUCT OVERVIEW TOOLHOLDING AND WORKHOLDING Partner with Systematic Solutions Toolholding and Workhodling product range Toolholding Systems The TOTAL TOOLING program from SCHUNK: Precision toolholding

More information

Sheet Metal Brake Plans for a 6' Sheet Metal Brake

Sheet Metal Brake Plans for a 6' Sheet Metal Brake Sheet Metal Brake Plans for a 6' Sheet Metal Brake,1752'8&7,21 Thank you for purchasing the sheet metal brake plans. The plans include a complete list of material needed and easy to follow steps to build

More information

ALBRECHT PRECISION KEYLESS DRILL CHUCKS THE WORLD'S MOST CONSISTENTLY ACCURATE DRILL CHUCKS

ALBRECHT PRECISION KEYLESS DRILL CHUCKS THE WORLD'S MOST CONSISTENTLY ACCURATE DRILL CHUCKS ALBRECHT PRECISION KEYLESS DRILL S THE WORLD'S MOST CONSISTENTLY ACCURATE DRILL S ALBRECHT The World's Most Consistently Accurate Drill Chucks For the past 00 years, Albrecht s line of precision drill

More information

Series CCR-40K/CR-40K Miniature DC 40 GHz Latching SPDT Coaxial Switch

Series CCR-40K/CR-40K Miniature DC 40 GHz Latching SPDT Coaxial Switch COAX SWITCHES Series CCR-40K/CR-40K PART NUMBER CCR-40K CR-40K DESCRIPTION Commercial Latching SPDT, DC-40GHz, 2.92mm. Elite Latching SPDT, DC-40GHz, 2.92mm. The CCR-40K/CR-40K is a broadband, SPDT, electromechanical,

More information

GMRS YAGI. By: Jeffrey Bail - N1BMX

GMRS YAGI. By: Jeffrey Bail - N1BMX D GMRS YGI y: Jeffrey ail - NMX Http://www.NMX.com TOOLS NEEDED: - Measuring Device (Tape Ruler and/or Vernier Calipers) - Marking Device (Center punch and/or Marker) - Hacksaw (Or and Saw/Chop Saw) -

More information

ACCESSORIES CATALOG. SKODA LIVE CENTERS BORING AND FACING HEADS

ACCESSORIES CATALOG.  SKODA LIVE CENTERS BORING AND FACING HEADS ACCESSORIES CATALOG BORING AND FACING HEADS SKODA LIVE CENTERS www.sowatool.com SKODA LIVE CENTERS Skoda Heavy Duty Live Centers - CSN 4334/CSN 4334M Features The rotating spindle is extended right through

More information

8mm x 25mm "Z" Bolt Plates. (2) Tube Spacers. (2) 12mm Bolt Plates w/ Nut

8mm x 25mm Z Bolt Plates. (2) Tube Spacers. (2) 12mm Bolt Plates w/ Nut PARTS LIST: 1 Grille Guard 10 12mm Lock Washers 1 Driver/Left Side Frame Mounting Bracket 8 12mm Hex Nuts 1 Passenger/Right Side Frame Mounting Bracket 2 10-1.50mm x 25mm Button Head Bolts 1 Driver/Left

More information

22 22, 24, , 18, AWG. 50 ohm 50 ohm. 75 ohm 75 ohm. 95 ohm 95 ohm

22 22, 24, , 18, AWG. 50 ohm 50 ohm. 75 ohm 75 ohm. 95 ohm 95 ohm ircular onnectors MR 4 Series onnectors General Information high density (.080 [2.0] contact centers), lightweight, subminiature, cylindrical connector series featuring crimp contacts and fingertip, push-pull,

More information

Upgrading the 5-GHz Radio Module

Upgrading the 5-GHz Radio Module CHAPTER 5 This chapter provides instructions for upgrading a 5-GHz radio module and includes the following sections: Upgrade Overview, page 5-2 Removing the 5-GHz Radio Access Cover, page 5-2 Removing

More information

METCUT. METCUT... Hole Making and Hole Finishing Tool Specialists. Indexable Drills 7 ]] EXPANDED LINE OFFERING. Integrated Design and Production

METCUT. METCUT... Hole Making and Hole Finishing Tool Specialists. Indexable Drills 7 ]] EXPANDED LINE OFFERING. Integrated Design and Production METUT METUT... Hole Making and Hole Finishing Tool Specialists METUT has been a manufacturer of high quality cutting tools for more than 0 years, and during that time has earned a reputation for innovative

More information

Broaching, External External Broach Tool Holders...18 Driven Broach Tool Holder for Multi's External Broaches...19

Broaching, External External Broach Tool Holders...18 Driven Broach Tool Holder for Multi's External Broaches...19 TABLE OF CONTENTS CATALOG 2017 TITLE PAGE Broaching, Internal Swiss Adjustment Free Broach Tool Holders...8 Swiss Broaching Heads for ER Collet Chucks...7 Adjustable Broach Tool Holders...10 CNC Adj. Free

More information

BUSBAR TRUNKING SYSTEMS 25A-63A AB-E SERIES. The smartest way of power distribution.

BUSBAR TRUNKING SYSTEMS 25A-63A AB-E SERIES. The smartest way of power distribution. BUSBAR TRUNKING SYSTEMS SERIES 25A-63A TABLE OF CONTENTS SERIES General Information 2-4 Project Information 5-6 Fittings Straight Lengths 7-8 Elbow Modules 8-9 Dilatation Module 9 Top Feed Module 10 End

More information

Series CCR-53S/CR-53S Miniature DC 26.5 GHz Latching SPDT Coaxial Switch

Series CCR-53S/CR-53S Miniature DC 26.5 GHz Latching SPDT Coaxial Switch PART NUMBER CCR-53S CR-53S DESCRIPTION Commercial Latching SPDT, DC-26.5GHz Elite Latching SPDT, DC-26.5GHz The CCR-53S/CR-53S is a broadband, SPDT, electromechanical, coaxial switch designed to switch

More information

Vertical Milling Machine Operations

Vertical Milling Machine Operations Vertical Milling Machine Operations UNIT 3 Learning Objectives After completing this unit, the student should be able to: Describe vertical milling machine safety practices Describe the purpose and process

More information

Chapter 22 MACHINING OPERATIONS AND MACHINE TOOLS

Chapter 22 MACHINING OPERATIONS AND MACHINE TOOLS Chapter 22 MACHINING OPERATIONS AND MACHINE TOOLS Turning and Related Operations Drilling and Related Operations Milling Machining Centers and Turning Centers Other Machining Operations High Speed Machining

More information

MASONRY DRILL and CHISEL

MASONRY DRILL and CHISEL MASONRY DRILL and CHISEL STRAIGHT SHANK MASONRY DRILL 8 Available in common size Made from carbide alloy Drill tip is welded with YG-carbide alloy steel Content of KW00537: Size: 4, 5, 6, 8, 0mm Content

More information

Mounting Systems & Hydro-Grip

Mounting Systems & Hydro-Grip Mounting Systems & ydro-rip Table of ontents Section escription Page Open nd Standard Sleeve... 4 Self entering Saw & ead Sleeve... 5 Set Screw ead Sleeves... 5 Steel & luminum Spacers... 6 Self entering

More information

Adhesive Air Terminal Bases. Universal Surface Bases. Offset Parapet Air Terminal Bases. Section 3.2. Air Terminals & Air Terminal Bases

Adhesive Air Terminal Bases. Universal Surface Bases. Offset Parapet Air Terminal Bases. Section 3.2. Air Terminals & Air Terminal Bases equipment catalog 3-5 Bases Adhesive Bases Used for mounting on membrane or built-up roofs. Mounted with adhesive or plastic roofing cement. The cast base has a mechanical conductor connector. BS-C-3/8ID-ADH-AT

More information

Melamine Plastic Laminate. Toilet Partition Installation Manual

Melamine Plastic Laminate. Toilet Partition Installation Manual Melamine Plastic Laminate Toilet Partition Installation Manual PHONE: FAX: 1-866-317-2786 ATTENTION DO NOT MIX FASTENER PACKS EACH FASTENER PACK HAS THE NECESSARY BOLTS, BARRELS AND SCREWS TO INSTALL THE

More information

Wettstein Tool TECHNOLOGIES. Milling Accessories. No. A C Air Collet Fixture. Manufacturers of Specialty TECHNOLOGIES INC.

Wettstein Tool TECHNOLOGIES. Milling Accessories. No. A C Air Collet Fixture. Manufacturers of Specialty TECHNOLOGIES INC. Wettstein Tool Milling Accessories No. A1 212 5C Air Collet Fixture For use with standard Hardinge 5C Collets. Designed especially for high production applications. Their light weight and compact size

More information

2008 D-1 CUTTING TOOLS

2008 D-1 CUTTING TOOLS 2008 D-1 CUTTING TOOLS Profile 40 years' Challenge has made New-Road. Another 40 years will Create New-Beginning. As a cutting tool manufacturer pursuing Leading-company of world market, Ceaseless challenge

More information

DRILL BITS & THREAD REPAIR DRILL BITS

DRILL BITS & THREAD REPAIR DRILL BITS DRILL BITS DRILL BITS Designed for drilling soft metal mild steel wood plastic and PVC Manufactured from industrial high speed steel surface treated for high performance and long life 29 piece set includes

More information

Automatic Tool Changer (ATC) for the prolight A Supplement to the prolight 1000 User s Guide

Automatic Tool Changer (ATC) for the prolight A Supplement to the prolight 1000 User s Guide Automatic Tool Changer (ATC) for the prolight 1000 A Supplement to the prolight 1000 User s Guide 1 1995 Light Machines Corporation All rights reserved. The information contained in this supplement (34-7221-0000)

More information

SPINDLE SYSTEM PAT. DUAL CONTACT. US Patent No. 5,352,073. MAZAK and MAZATROL are registered trademarks of YAMAZAKI MAZAK CORPORATION.

SPINDLE SYSTEM PAT. DUAL CONTACT. US Patent No. 5,352,073. MAZAK and MAZATROL are registered trademarks of YAMAZAKI MAZAK CORPORATION. SPINDE SYSTEM PAT. DUA CONTACT US Patent No. 5,352,073 INTEGREX SERIES INTEGREX e SERIES MAZAK and MAZATRO are registered trademarks of YAMAZAKI MAZAK CORPORATION. R The very first modular tooling system

More information

BDV/DV SHANK DUAL CONTACT. BDV/DV Shank

BDV/DV SHANK DUAL CONTACT. BDV/DV Shank R DV/DV S P I N D E S Y S T E M DUA CONTACT DV/DV Shank DUA CONTACT DV/DV For High Speeds MEGA MICRO CHUCK PAT. Clamping diameter: ø0.45 - ø8.05 Ultra-slim design with world's smallest ø10 nut outer diameter.

More information

Product Overview. for perfect connections

Product Overview. for perfect connections Product Overview for perfect connections TOOL HOLDERS FOR DRILLING, TAPPING & REAMING Smart solutions for high quality clamping systems in tapping applications Tapping solution range from M1 M200 Quick

More information

Focusing on the future of metal cutting.

Focusing on the future of metal cutting. _PRODUCT HIGHLIGHTS Focusing on the future of metal cutting. Product highlights Edition 2017-1 Turning, drilling, threading, milling Tiger tec Gold Go for better, go for Gold. For those who won t settle

More information

Compression Forged Tip Ideal fit and reduces breakage. Shock Zone Geometry * Designed to flex with spring-like action Reduces stress at the tip

Compression Forged Tip Ideal fit and reduces breakage. Shock Zone Geometry * Designed to flex with spring-like action Reduces stress at the tip NEW! SHOCKWAVE IMPACT DUTY ACCESSORIES Compression Forged Tip Ideal fit and reduces breakage Shock Zone Geometry * Designed to flex with spring-like action Reduces stress at the tip Custom Engineered Steel

More information

SUPER COMPACT - SCP 6 SUPER COMPACT

SUPER COMPACT - SCP 6 SUPER COMPACT SPER OMPT - SP 6 SPER OMPT SP SPER OMPT SETION ONTENTS 8 Features 14 Feeder elements 15 Distribution Elements 16 Expansion elements 17 Fire barrier elements 18 Elbows 20 Double elbows 24 T-elements 26

More information

10 Let us send you information on the complete product range of Bosch power tools! 12 Geschäftsbereich Elektrowerkzeuge Postfach

10 Let us send you information on the complete product range of Bosch power tools! 12 Geschäftsbereich Elektrowerkzeuge Postfach Tools MGE 1.0 14-1 Tools 1 4 5 7 Drilling jigs (p. 14-) Offset screwdriver Torx (p. 14-) Variofix remover, flexible grinder for anodized surfaces (p. 14-7) Tool shelf, tool holder (p. 14-) 9 Let us send

More information

Horizontal Cable Systems

Horizontal Cable Systems ALUMINUM RAILING INSTALLATION INSTRUCTIONS v2012 orizontal Cable Systems 1) Check Contents Of Packages: Verify that all parts have arrived and that they match the packing list. 1A) Coastal applications:

More information

Boring. Reaming. Burnishing. Threading. Drilling. Opening Drill. Large Diameter Replacable IC Insert Drilling System. Specials

Boring. Reaming. Burnishing. Threading. Drilling. Opening Drill. Large Diameter Replacable IC Insert Drilling System. Specials oring Reaming urnishing Threading rilling Opening rill Large iameter Replacable I Insert rilling System Specials Opening rill Large iameter Replaceable I Insert rilling System iameter Range: 50.80mm -

More information

Chapter 23 Drilling and Hole Making Processes. Materials Processing. Hole Making Processes. MET Manufacturing Processes

Chapter 23 Drilling and Hole Making Processes. Materials Processing. Hole Making Processes. MET Manufacturing Processes MET 33800 Manufacturing Processes Chapter 23 Drilling and Hole Making Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Materials Processing

More information