HIGH PERFORMANCE CARBIDE THREAD MILLS
|
|
- Ophelia Casey
- 5 years ago
- Views:
Transcription
1 HIGH PERFORMANCE CARBIDE THREAD MILLS TM Series
2
3 HIGH PERFORMANCE CARBIDE THREAD MILLS table of contents Introduction... page 1 Understanding Milling... page 2 Niagara Mill Advantages... page 3 High Performance Carbide Mills UN THREADS.. TM100UN... page 4.. TM120UN - With Coolant-Through Feature... page 5.. TM160UN - With Extended Reach... page 6.. TM140UN - With CVD Diamond Coating...page 7 NPT / NPTF THREADS.. NPT - TM200NPT... page 8.. NPTF - TM300NPTF... page 8.. NPTF - TM320NPTF - With Coolant-Through Feature... page 8 METRIC THREADS.. TM500MM... page 9.. TM520MM - With Coolant-Through Feature... page 9.. TM560MM - With Extended Reach...page 10.. TM540MM - With CVD Diamond Coating...page 10.. TM400MI - Inch...page 11.. TM420MI - Inch With Coolant-Through Feature...page 12 Application Recommendations...page 13 Programming...page 14 Tool Path During Milling...page 15 Forms, Design, Tolerances...page 16 Mill Justification... page 17 Understanding Feed Rates...page 18 Parameters...page 19
4 innovative thread mills Introducing A New State-of-the-Art Line of Solid Carbide Mills You Know Our Quality End Mills Now Meet Our Innovative Mills Niagara is now manufacturing a new benchmark in solid carbide thread mills by employing innovative technology. Niagara Mill Key Features Sub-micron grain tungsten solid carbide is used for production thread milling and for work piece materials up to 62 HRC Engineered geometry for multiple work piece materials: -- Helical flute creates a tool with a positive cutting action -- Helix angle reduces radial tool pressure in-the-cut -- Application engineering provides an excellent, consistent surface finish -- Standard products with coolant-through feature Surface engineered finishes and coatings Coatings Available: -- Standard - AlCrN, CVD Diamond -- Available - TiN, TiCN, TiAIN, AITiN High Precision CNC Grinding & Manufacturing Technology -- Proprietary Grinding Systems & Software -- CNC Grinding with Controlled Wheel Dressing -- High Precision Form Production under controlled conditions High Precision Form at 1500 Magnification 1 Smooth Ground Finishes on 1500 Magnification
5 understanding thread milling milling is a machining process that will produce a high quality thread. milling can be used to produce many different types of thread forms. Different thread classes can be produced with the same tooling (ex. Class 1, 2, and 3). milling uses a process referred to as helical interpolation and requires that all three axes of the machine move simultaneously to create the thread. The full depth of the thread can be machined at the same time; the distance of movement for the Z-Axis is determined by the thread pitch (1/). The circular motions of the X & Y axes create the thread form and major diameter. The advancements in Computer Aided Manufacturing (CAM) technology have made the programming of thread milling a simple and user-friendly process. milling allows you to control the pitch diameter and hold much tighter tolerance with consistent results. The Niagara Milling tools are based on a solid carbide tool that has been designed for the specific thread form to be machined. Special thread forms can be quoted. 2
6 carbide thread mill advantages Substantial Productivity & Cost Savings Achieved Through the Use of Mills milling is one of the fastest growing technologies in the metalworking industry because of its superior productivity and cost savings potential over conventional tapping. The diameter of a thread milling cutter is smaller than the drilled hole, and the cutter is rotating to reduce the cutting torque when compared with machine tapping. When using a tap you are putting your faith in the tool. When you thread mill you put your faith in the machine tool. milling techniques reduce the need for multiple tools milling techniques create greater precision in the thread form Excellent surface finish on the thread One tool for both internal and external threads One tool can produce all thread classes Higher cutting speeds and feeds (up to 40%) Longer tool life (up to 50%) can be generated in one pass Ideal in making blind holes (can cut within a half pitch of bottom) Right and left hand threads are produced with the same tool Reduction in horsepower requirements are attained on larger diameters Superior quality threads can be produced in soft, gummy materials Can be used in materials up to 62 HRC Improved chip management, small controlled chips, no bird nesting The Bottom Line: Up to 500% Productivity Improvement!! 3
7 High Performance Carbide Mills UN s - TM100UN Carbide Mill with Helical Flutes for Internal & External ing Drill 75% Drill 50% UNC AlCrN / / / / / / / / / / / / / / / / /2 3 7/ / / /2 3 F J / / /2 3 I 9/ / / /2 3 9/32 L / / /16 Q / / Q S / / U 25/ / / /64 13/ / / /2 3 27/64 29/ / / /2 3 29/64 15/ / / /2 3 15/32 15/ / / /2 4 31/64 33/ / / /2 4 33/64 17/ / / /32 9/ / / /64 9/ / / /64 19/ / / /32 11/ / / /64 11/ / / /16 45/ / / /64 23/ / / /64 51/ / / /64 13/ / / /16 53/ / / /16 53/ / / /64 27/ / /8 59/ / /16 61/ / /16 61/
8 High Performance Carbide Mills UN s - TM120UN - with Coolant-Through Feature Carbide Mill with Helical Flutes for Internal & External ing Drill 75% Drill 50% AlCrN / / / / / / / / / / / /2 3 F J / / /2 3 I 9/ / / /16 Q / / Q S / / U 25/ / / /64 13/ / / /2 3 27/64 29/ / / /2 3 29/64 15/ / / /2 4 31/64 33/ / / /2 4 33/64 17/ / / /32 9/ / / /32 11/ / / /64 11/ / / /16 45/ / / /64 51/ / /8 59/
9 High Performance Carbide Mills UN s - TM160UN - with Extended Reach Carbide Mill with Helical Flutes for Internal & External ing Reach Drill 75% Drill 50% AlCrN / / / / / / / / / / / / / / / / /2 3 7/ / / /2 3 F J / / /2 3 I 9/ / / /2 3 9/32 L / / /16 Q / / Q S / / U 25/ / / /64 13/ / / /64 29/ / / /64 15/ / / /32 15/ / / /64 33/ / / /64 17/ / / /2 4 17/32 9/ / / /2 4 35/64 9/ / / /2 4 37/64 19/ / / /32 11/ / / /64 11/ / / /16 45/ / / /64 23/ / / /64 51/ / / /64 13/ / / /16 53/ / / /16 53/ / / /64 27/ / /8 59/ / /16 61/ / /16 61/
10 High Performance Carbide Mills UN s - TM140UN - with CVD Diamond Coating Carbide Mill with Helical Flutes for Internal & External ing Drill 75% Drill 50% Diamond / / / / / / / / / / / / / / / / / F J / / I 9/ / / /32 L / / /8 3 5/16 Q / / /8 3 Q S / / /8 3 U 25/ / / /8 3 25/64 13/ / / /64 29/ / / /64 15/ / / /32 15/
11 High Performance Carbide Mills NPT s TM200NPT Carbide Mill with Straight Flutes for Internal & External ing Drill UNC AlCrN 1/ / /2 3 B / / /2 3 21/ / / / / / / / / / / / / / / / / / NPTF s TM300NPTF Carbide Mill with Straight Flutes for Internal & External ing Drill UNC AlCrN 1/ / /2 3 B / / /2 3 21/ / / / / / / / / / / / / / / NPTF s TM320NPTF - with Coolant-Through Feature Carbide Mill with Straight Flutes for Internal & External ing Drill AlCrN 1/ / /2 3 B / / /2 3 21/ / / / / / / / / / / / / / /
12 High Performance Carbide Mills Metric s - TM500MM Carbide Mill with Helical Flutes for Internal & External ing Drill 75% UNC AlCrN M mm 4mm 4.5mm 51mm M mm 4mm 7mm 51mm M mm 6mm 8mm 51mm M mm 6mm 13mm 64mm M mm 6mm 16mm 64mm 3 H M mm 8mm 19mm 64mm 3 11/ M mm 8mm 19mm 64mm 3 R M mm 10mm 23mm 88mm 3 27/ M mm 10mm 23mm 88mm 3 13/ M mm 12mm 32mm 100mm 4 35/ M mm 14mm 32mm 100mm 4 11/ M mm 16mm 35mm 100mm 4 53/ Metric s - TM520MM - with Coolant-Through Feature Carbide Mill with Helical Flutes for Internal & External ing Drill AlCrN M mm 6mm 13mm 64mm M mm 6mm 16mm 64mm 3 H M mm 8mm 19mm 64mm 3 11/ M mm 8mm 19mm 64mm 3 R M mm 10mm 23mm 88mm 3 27/ M mm 10mm 23mm 88mm 3 13/ M mm 12mm 32mm 100mm 4 35/ M mm 14mm 32mm 100mm 4 11/ M mm 16mm 35mm 100mm 4 53/
13 High Performance Carbide Mills Metric s - TM560MM - with Extended Reach Carbide Mill with Helical Flutes for Internal & External ing Reach Drill 75% AlCrN M mm 4mm 1.5mm 9mm 51mm M mm 4mm 2.1mm 12.7mm 51mm M mm 6mm 2.3mm 13mm 75mm M mm 6mm 3.0mm 19.5mm 75mm M mm 6mm 3.8mm 29mm 75mm 3 H M mm 8mm 3.8mm 43.5mm 80mm 3 11/ M mm 8mm 4.5mm 40mm 80mm 3 R M mm 10mm 3.8mm 52.5mm 100mm 3 27/ M mm 10mm 5.3mm 48mm 100mm 3 13/ M mm 12mm 6.0mm 66.5mm 120mm 4 35/ M mm 14mm 7.5mm 64mm 120mm 4 11/ M mm 16mm 9.0mm 83mm 120mm 4 53/ Metric s - TM540MM - with CVD Diamond Carbide Mill with Helical Flutes for Internal & External ing Drill 75% Diamond M mm 4mm 4.5mm 55mm M mm 4mm 7mm 55mm M mm 6mm 8mm 64mm M mm 6mm 13mm 64mm M mm 6mm 16mm 64mm 3 H M mm 8mm 19mm 64mm 3 11/ M mm 8mm 19mm 64mm 3 R M mm 10mm 23mm 63mm 3 27/ M mm 10mm 23mm 63mm 3 13/ M mm 12mm 32mm 76mm 4 35/
14 High Performance Carbide Mills Metric s / Inch - TM400MI Carbide Mill with Helical Flutes for Internal & External ing Drill 75% UNC AlCrN M / M / M / M / M / M / / M / /2 3 J M / /2 3 H M / / M / R M / /2 3 27/ M / /2 3 13/ M / /2 4 1/ M / /2 4 1/ M / /2 4 15/ M / / M / / M / / M / / M / / M / mm M / / M / mm M / /
15 High Performance Carbide Mills Metric s / Inch - TM420MI - with Coolant-Through Feature Carbide Mill with Helical Flutes for Internal & External ing Drill 75% AlCrN M / / M / /2 3 J M / /2 3 H M / / M / R M / /2 3 27/ M / /2 3 13/ M / /2 4 1/ M / /2 4 1/ M / /2 4 15/ M / / M / / M / / M / / M / / M / mm M / / M / mm M / /
16 application recommendations Z milling tools form a thread using a motion referred to as helical interpolation. This process involves the movement of all three axes on the machine simultaneously. The X and Y axes move in a circular motion and the Z in an axial direction per 360 degrees at a distance equal to the pitch of the thread being machined. B Y Shown in Figure 1 the programmed tool path starts from the bottom (Point A) and moves toward the top (Point B). A right-hand thread will be climb cut using this process. A Figure 1 X Note: When machining a right-hand thread you will be machining from bottom-to-top for climb cutting. If machining a left-hand thread you will start from top-to-bottom with a right-hand helix tool. Left-hand threads can be climb cut with a left-hand helix tool starting from the bottom-to-top. Climb milling is the preferred method Move the tool to the center of the location thread to be milled Start from the bottom of the hole to avoid re-cutting any chips Offset tool from center of the hole to allow a smooth start into the thread For difficult materials it may be necessary to make multiple passes When threading Inconel, Stainless, Hastelloy, Waspaloy, reduce the amount of percentage of thread; consider 50 60%. Request approval from your customer before implementing 13
17 programming A) Start Location G01 G41 X Y D F B) Ramp into full depth-of-cut (Smooth Entrance) G03 X Y C) Counter Clockwise interpolation (Climb Cut) G03 X Y Z I J D) Ramp off for a smooth exit G03 X Y E) Ramp away from work surface G01 G40 X Y Mastercam offers an excellent thread mill programming routine. The programming is very easy to use. You will need to know the following application information: / / Depth / Number of Passes / SFM / IPT The thread milling routine can be found under Toolpaths / Circle Paths / Mill in Mastercam 14
18 15 tool path during thread milling
19 thread forms, design, tolerances Standard Niagara Mills - Form Styles n Unified National Coarse UNC / 60 Degree / Common Std. n Unified National Fine UNF / 60 Degree / Common Std. n Unified National Extra Fine UNEF / 60 Degree / Common Std. n National Pipe Tapered NPT 60 Degree n National Pipe Tapered - NPTF n Metric M Series Special Mills Available Upon Request - Form Styles n UNJ - 60 Degree - Aerospace s / Controlled Root & Crest n ACME Screw s 29 Degree High Strength n Buttress s Three different styles 50, 45, and 33 Degree s n American Petroleum Industry API / 60 Degree / Controlled Root & Crest n Whitworth s 55 Degree Please contact Niagara at if you have a special thread mill requirement. Information for special threads will include thread style, size, pitch, form & depth. Mill Design Niagara Mills are designed and comply with following standards: n UN - ASME B1.1 n NPT / NPTF - ANSI / ASME B n Metric ISO 724 Mill Tolerances Inch Tolerances Flute / / Metric Tolerances Flute mm / mm h6 16
20 thread mill justification Is it faster to thread mill or tap the work piece? This question is often asked. Look at the following example: ing Application Comparison Material 4140 Steel 1/4-20 Depth-of- 1/2 Parameters Milling Standard Tapping SFM IPM Time-in-Cut (seconds) milling is generating a very small circumference at a high feed rate. Example: Circumference =.050 Feed Rate = IPM Tapping vs Milling Machining Comparison Mill Traditional Tap Broken Tooling Easy to Remove + - Free + - Consistent Results + - Easy to thread difficult materials: Inconel, Stainless, Titanium, etc. + - Special Programming
21 understanding feed rate calculation Normal milling feed rates are calculated from the center-line of the cutting tool. The regular feed rate calculation is Feed Rate = Revolutions per Minute (RPM) x Number of x Chip per Tooth. The circular motion of the thread mill cutting action requires a different calculation to be used. For an internal thread the feed rate at the cutting edge actually increases as the cutter diameter increases. For an external thread the feed rate at the cutting edge actually decreases as the cutter diameter increases. As shown in the illustration below the internal has 137 degree engagement and the external has only 66 degree engagement. Formulas: Internal Feed Rate to be Programmed = Actual Feed Rate x ( of the Work of the ) / of the Work External Feed Rate to be Programmed = Actual Feed Rate x ( of the Work + of the ) / of the Work
22 thread mill parameters Material Group Brass / Bronze Grades Free Machining and Cast Recommended Percentage of *** Niagara Mill Parameters SFM Feed Rate (IPT) Tool 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/ Copper Alloys Aluminum Alloys 6061, 7050, Gray Cast Irons Gray Ductile Cast Irons Ductile Titanium Alloys 6 Al 4V Low Carbon Steels < 25 HRC Med. Carbon Steels HRC High Carbon Steels HRC Tool Steels HRC Tool Steels >45 HRC Nickel Alloys Stainless Allloys Composites / Ceramics 12L H10, D2 A2, M2 H10, D2 A2, M2 Inconel Waspaloy Hastelloy Monel Nickel 300 Series 400 Series 15-5, 13-8 Nitronic Composites Ceramics ***Note: A reduction in thread engagement will increase thread mill tool life and will not effect the integrity or the thread strength. 19
23
24 leading in high-performance cutting tools Application Engineering It starts with listening and learning and then culminates with a product that does not just perform, but outperforms that which previously existed. Between initial concept and final product there is application engineering, prototype development, exhaustive product testing and critical analysis a truly innovative, and comprehensive, systems approach to world-class products. Niagara has not only dedicated itself to this process of constant improvement, but is proud of its record of significant innovation and industry advancements. Headquarters 200 John James Audubon Parkway Amherst, NY USA Fax: End Mill Manufacturing 150 South Fifth Street Reynoldsville, PA USA Fax: Milling Manufacturing 273 Main Street Athol, MA USA Fax: niacut@niagaracutter.com For Customer Service & Technical Assistance Manufacturing Technology Niagara continues to invest heavily in automated processes, but in the final analysis, these machines are only as capable as their programming and maintenance allows and the final products are only as consistent as the parameters set by Niagara s machinists. It is in these areas where no machine can match the human contribution. Niagara aggressively pursues continuous improvement, in its automated operations, and its people. Therefore, the perfect operation between man and machine at Niagara results in a company that is far greater than the sum of the parts in achieving consistency and accuracy. Products - High Performance Tool Solutions Niagara offers over 300 product styles, including end mills, thread mills, saws and milling cutters, as well as special cutting tools to customer blue prints. With multiple material substrates (high-speed steel, cobalt, tungsten carbide), tool geometries and thin film coatings, we provide a complete product range to meet your cutting tool requirements. Our job is not just producing millions of premium cutting tools; it is producing premium cutting tools specifically for your application and for absolute optimum performance, by asking the critical questions and quickly responding with the most effective solution. TM10-X Copyright 2010 Niagara
STUB ACME - INTERNAL AND EXTERNAL
STUB ACME - INTERNAL AND EXTERNAL SOLID CARBIDE SINGLE PROFILE ACME Q A 29º B C S Solid carbide for maximum tool rigidity coating for increased performance Single start threads only SPECIALTY PORT - CAVITY
More informationUN THREAD MILLS SINGLE PROFILE (SPTM) - SOLID CARBIDE. Scientific Cutting Tools, Inc. OAL 60º THREAD MILLS
UN SINGLE PROFILE (SPTM) - SOLID CARBIDE UN Q A B 60º C S Fine and coarse threads ranging from #00 to 1¼ + can be milled using the 19 varieties of these single profile thread mills. SPECIALTY PORT - CAVITY
More informationOptimized flute design Better chip evacuation. Carbide substrate Higher heat resistance, higher speed.
Thread Mills Available for the first time, our solid thread mills are designed to be the highest quality thread milling solution. WIDIA-GTD Cut up to 63 HRC. Improved overall thread quality. Optimized
More informationLEADING SOLUTIONS IN THREAD MILLING TECHNOLOGY
LEADING SOLUTIONS IN THREAD MILLING TECHNOLOGY Thread with Maximum Confidence, Depth, Versatility and Economy. Emuge Shur-Thread TM, Threads-All TM, Vario-Z and NPT Solid Carbide Thread Mills; and Gigant-ic
More informationThread Mills. Solid Carbide Thread Milling Cutters
Thread Mills Solid Carbide Thread Milling Cutters Thread milling cutters by Features and Benefits: Sub-micro grain carbide substrate Longer tool life with tighter tolerances More cost-effective than indexable
More informationMETRIC THREAD MILLS SINGLE PROFILE (SPTM) - SOLID CARBIDE. Scientific Cutting Tools, Inc. Q A C OAL 60º THREAD MILLS METRIC
METRIC SINGLE PROFILE (SPTM) - SOLID CARBIDE METRIC Q A B 60º C S With just 19 varieties of Thread Mills, fine and coarse threads ranging from M1.2 to M30+ can be milled SPECIALTY PORT - CAVITY INDEXABLE
More informationApplication and Technical Information Thread Milling System (TMS) Minimum Bore Diameters for Thread Milling
Inserts Application and Technical Information Minimum Bore iameters for Thread Milling UN-ISO-BSW tpi 48 3 4 0 16 1 10 8 7 6 5 4.5 4 Technical ata Accessories Vintage Cutters Widia Cutters Thread Milling
More informationBULLDOG CUTTING TOOLS PROUDLY MADE IN THE USA THREAD MILLING
BULLDOG CUTTING TOOLS THREAD MILLING 126 Jackson St. Red Bud, IL 62278 Toll Free Phone: 1 (844) 441-5624 Fax: (618) 282-2831 sales@bulldogcut.com PROUDLY MADE IN THE USA SAFETY PRECAUTIONS Cutting tools
More informationINTRODUCING YG-1 TAPS COLOUR BAND MACHINE TAPS HAND TAPS PIPE TAPS
INTRODUCING YG-1 TAPS COLOUR BAND MACHINE TAPS HAND TAPS PIPE TAPS TAP SELECTION GUIDE HAND TAPS 3 SPIRAL POINT TAPS Plug Style 4 SPIRAL FLUTE TAPS Bottoming Style 5 SPIRAL POINT TAPS Plug Style 6-7 SPIRAL
More information2018 PRICE LIST SOLID CARBIDE THREAD MILLS
2018 PRICE LIST SOLID CARBIDE THREAD MILLS NORTH AMERICAN TOOL HISTORY & OVERVIEW North American Tool was founded in 1986, by the father and son team of Kenyon Y. Taylor and Roger K. Taylor. Working in
More informationTHREAD MILLING. A Quick Reference Pocket Guide. Overall Length. Length of Cut. Cutter Diameter.
THREAD MILLING A Quick Reference Pocket Guide Overall Length Length of Cut Shank Diameter Cutter Diameter www.alliedmachine.com Whatever type of holemaking you do, Allied is here help. Whether you re a
More informationSolid Carbide Thread Milling Cutters
Solid Carbide Thread Milling Cutters Second Edition Thread milling cutters by Features and Benefits: Sub-micro grain carbide substrate Longer tool life with tighter tolerances More cost-effective than
More informationCARBIDE END MILLS SPECIFICATIONS
SPECIFICATIONS COATING GUIDE Material Hardness TiN TiCN TiALN Austentic Stainless Steel < 35 HRc * X Martinistic Stainless Steel < 35 HRc * X Martinistic Stainless Steel >= 35 HRc X PH Stainless Steel
More informationTHREAD CUTTING & FORMING
THREAD CUTTING & FORMING Threading, Thread Cutting and Thread Rolling: Machining Threads on External Diameters (shafts) Tapping: Machining Threads on Internal Diameters (holes) Size: Watch to 10 shafts
More informationA BALAX, INC. GUIDE TO TAPPING IN THE 21ST CENTURY
2011 Threading Solutions for Every Industry A BALAX, INC. GUIDE TO TAPPING IN THE 21ST CENTURY At Balax, we recognize the increased demands placed on our customers for improved quality and lower production
More informationAPOLLO. Variable Helix Corner Radius End Mills. Excellent for Alloy Steel, Nickel Inconel Alloys, Stainless and Carbon Steel
Variable Helix Corner Radius End Mills Excellent for Alloy Steel, Nickel Inconel Alloys, Stainless and Carbon Steel Unequal Flute Design for Chatter Resistance Great for Roughing or Finishing High Performance
More informationTaps. Taps - Technical Info. Torque Cut High Performance HSSE Ring Colored Taps Technical Information. - Technical Information
Torque Cut High Performance HSSE Ring Colored Taps Technical Information RedLine Torque Cut High Performance Taps give you greater performance when tapping Steel Alloys, Stainless Steels, Titanium and
More informationSINGLE POINT TOOLS. Mini Boring Bars Mini Boring Bars come in a range of diameters from to inch. They are fluted for maximum strength.
SINGLE POINT TOOLS All single point tools are designed for internal machining on a lathe. The helical boring bars can be used for both lathe and mill applications. All cutting tools are made from premium
More informationHigh Performance HSSE Color Ring Tap Speeds
Torque Cut High Performance HSSE Color Ring Taps RedLine Torque Cut High Performance Taps give you greater performance when tapping Steel Alloys, Stainless Steels, Titanium and a variety of other Steels
More informationJCutting Tools aerospace
JCutting Tools aerospace AppLIcations A286 Fasteners The new and improved Jarhook is the best available tap for A286 fasteners. During extensive testing the Jarhook surpassed all of the competition in
More informationTHREAD MILLS - NPT - STRAIGHT FLUTE
THRED MILL NPT PECILTY PORT - CVITY INDEXLE INGLE POINT THRED MILL - NPT - TRIGHT FLUTE OLID CRIDE (NTIONL PIPE TPER) THRED / PITCH THRED / PITCH TRIGHT FLUTE - NPT UNCOTED LTiN+ 1/16, 1/8-27 0.218 0.534
More informationMission Statement. 2005, Manchester Tool Company. All rights reserved.
Mission Statement Manchester Tool Company shall provide tooling systems to the metal cutting and similar industries, specializing in cutoff, grooving and complimentary niche products. We are dedicated
More informationEmuge Chip-Breaking Tapping Technology. Only one Tool, for Horizontal and Vertical Apps! NEW Sizes + Coolant-Fed Taps!
TM Emuge Chip-Breaking Tapping Technology. Only one Tool, for Horizontal and Vertical Apps! NEW Sizes + Coolant-Fed Taps! Emuge Chip-Breaking Technology TM Emuge s new Rekord DZBF Series Taps featuring
More informationYour Specials Are Our Standards TM
09/2010 TM Your Specials Are Our Standards TM 400 New Tools Inside! See Inside Cover For Details ALL TOOLS IN STOCK! SAME DAY SHIPPING! Harvey Tool Company, LLC 319 Newburyport Turnpike Rowley, MA 01969
More informationEngraving with a Rigid Tool Engraving Tool Feeds and Speeds
Engraving with a Rigid Tool Engraving Tool Feeds and Speeds Material 3000 RPM 6000 RPM 7500 RPM 10000 RPM Aluminum/Aluminum Alloys 6 12 15 20 Brass/Bronze 6 12 15 20 Copper/Copper Alloys 6 12 15 20 Cast
More informationTHREAD MILLS - METRIC
METRIC Q - METRIC TRIGHT FLUTE - CRIDE FULL PROFILE hort length-of-cut for ideal length-to-diameter ratio Polished flute face for optimum performance Made with premium submicron grade carbide Internal
More information18mm Insert Face Mill
January 2005 / NEW-033 PAGE 1 OF 9 18mm Insert Face Mill MATERIAL Cast Iron, Stainless Steel, Carbon Steel, Hi-Temp Alloys, Titanium, Inconel DIAMETER RANGE 3.00" - 12.00" LEAD ANGLES 0º and 45º INSERT
More informationSpeed (SFM) Radial DOC x D. .5 x D. 1 x D. .5 x D. 1 x D. .5 x D.
GP High Performance 4 Flute End Mills TyCarb GP High Performance end mills feature Differential flute spacing to achieve virtually chatter free machining in a wide range of materials. Excellent results
More informationINDEX. List Price Catalog - Current Pricing On Our Website. List Price Catalog - Check Website For Current Pricing. * = additional sizes added
INDEX List Price Catalog - Check Website For Current Pricing * = additional sizes added PG CATEGORY NOTE 4 Threadmill - UNC/UNF * 5 Threadmill - UNC/UNF (Continued) & Thread Pac 6 Threadmill - NPT/NPTF
More informationPOWER PRICE UNI. powerful UNF METAL. UNCPower UNIVERSAL TAPS. power ful. powerful TOP GEOMETRIES UNF PERFECT CHOICE VER UNIVERSAL TAPS SAL UNIVERSAL
MADE BY UNIVERSALtaps TOP QUALITY FROM GERMANY at a Power Price TOP GEOMETRIES FORM EUNIVERSAL UNIVERSAL TAPS powerful perfect UNF longideal flutes choice tool life PROCESS RELIABLE PERFECT Form universal
More informationHertel Indexable Drills (HID)
Hertel Indexable Drills (HID) mscdirect.com/hertel DESIGNED TO DELIVER Hertel cutting tools are designed to deliver consistency, reliability, durability and value with every cut. For over 65 years, Hertel
More informationUNIT 9b: SCREW FASTENERS Introduction Functions Screw Features Elements Terms of a Thread Profile
UNIT 9b: SCREW FASTENERS Introduction A mechanical screw is a cylinder or cone that has a helical ridge called a thread. A helix has one or more turns, so a screw can have several turns. If the helix is
More informationTAP & DIE PRICE LIST INDEX
TAP & DIE PRICE LIST INDEX ANPT Die Page 4 BA Die Page 4 BA Tap Page 17 BSF Tap Page 19 BSB Die Page 4 BSB Tap Page 17 BSCY Tap Page 17 BSF Die Page 3 BSP Die Page 4 BSP Tap Page 18 BSPT Die Page 4 BSPT
More informationPitch Perfect Threading. Pitch Perfect Threading
Pitch Perfect Threading 1 2 Pitch Perfect Threading 3 Process considerations Threading methods Existing Is the process stable today Is the productivity maximized Is chip control acceptable Is the quality
More informationPCD Cartridge Style Face Mill and End Mill Program
PC Cartridge Style Face Mill and End Mill Program soft, free- non-ferrous metals (eg: 6061 aluminum, brass, and copper) graphite, carbon, green ceramics, fiber-reinforced plastics, and fiberboard low-silicon
More informationYour Specials Are Our Standards
03/2011 TM Your Specials Are Our Standards TM 430 New Tools Inside! See Inside Cover For Details ALL TOOLS IN STOCK! SAME DAY SHIPPING! Harvey Tool Company, LLC 319 Newburyport Turnpike Rowley, MA 01969
More informationand AM-CAT-COREV(GB)-11/08 High Performance Indexable Insert Systems
and AM-CAT-COREV(GB)-11/08 High Performance Indexable Insert Systems Allied Maxcut Engineering Co. Limited AMEC Indexable Drill Range The AMEC range of adjustable indexable carbide drills provides the
More informationInsert Inch Overview. Insert Overview
Insert Overview The Inserts Millstar inserts are fully ground precision inserts for better chip control, faster metal removal and higher surface accuracies. They are far more accurate than pressed and
More information45PC. TAP AND DIE SET
Model # 7560 7561 45PC. TAP AND DIE SET OPERATOR S MANUAL STORE THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE Wear eye protection Use proper lubrication WARNING: FOR HAND CUTTING APPLICATIONS ONLY.
More informationYAMAWA High Performance Taps for Aerospace Industry
YAMAWA High Performance Taps for Aerospace Industry The demand for tapping into heat resistant alloys and stainless steels is increasing rapidly in the Aerospace Industry. The most common heat resistant
More informationwith better tools from Introducing: Dapra's New Modular Heads Designed to Screw On to Industry Standard Systems
CUTTING Times Vol. 4, Issue 1 with better tools from Dapra Corporation 66 Granby Street, Bloomfield, CT 06002 1-800-243-3344 860-242-8539 Fax 860-242-3017 Email info@dapra.com www.dapra.com Introducing:
More informationCutting Tools. Round Tooling TMX-TOOL Fax
Round Tooling +1-508-653-8897 844-TMX-TOOL Fax +1-508-653-5110 www.tmxtools.com 245 Quick Lookup Round Tooling DRILLS...247 ANNULAR CUTTERS...295 REAMERS...299 COUNTERBORES AND COUNTERSINKS....321 CARBIDE
More informationPlus Our NEW Quick Delivery Step Drill Program
LE ADING SOLUTIONS FOR CHAMFERED / THRE ADED HOLES Plus Our Quick Delivery Step Drill Program CHAMFERED / THREADED HOLE SOLUTIONS From standard stocked tools to our Quick Delivery Program a full range
More informationY A M A W A. We thank you for your continued support.
Y A M A W A Mr. Jokichi Watanabe, founder of Yamawa Manufacturing, located his company in Shibuya-Ku, Tokyo during 1923. Since then, Yamawa continues a strong effort to evolve it's manufacturing technology
More informationSHEAR IT. CLEAR IT. STREAKERS END MILLS M2 SERIES FRACTIONAL CATALOG. Put aluminum in its place.
SHEAR IT. CLEAR IT. STREAKERS END MILLS M2 SERIES FRACTIONAL CATALOG Put aluminum in its place. CONTENTS: 4 STREAKERS M2 Features IMCO s unique design makes the entire STREAKERS M2 Series first-rate roughers
More information+1-508-653-8897 800-992-4766 www.toolmex.com Dear Valued Customers, The TMX Team have broadened our line of round cutting tools and holders to ensure that you have the productivity tools that you need
More informationBoring. Reaming. Burnishing. Threading. Drilling. Opening Drill. Large Diameter Replacable IC Insert Drilling System. Specials
oring Reaming urnishing Threading rilling Opening rill Large iameter Replacable I Insert rilling System Specials Opening rill Large iameter Replaceable I Insert rilling System iameter Range: 50.80mm -
More informationRouter Section 2018 Master Catalog
Router Section 2018 Master Catalog For more than 95 years, M.A. Ford has been at the cutting edge of tooling design and manufacturing and has developed an enviable global reputation for performance and
More informationHigh Performance Variable Helix Fractional and Metric
High Performance Variable Helix Fractional and Metric ctured in the U. ufa S. an Di st be A. M rib uted A ro u n d t h e ISO 9001:2015 CERTIFIED Gl o Chatter Free Parts Faster Feed Rates Longer Tool Life
More informationTRAINING MANUAL. Part INTRODUCTION TO TWIST DRILLS
PRESTO INTERNATIONAL UK LTD TRAINING MANUAL Part 2 INTRODUCTION TO TWIST DRILLS - 1 - DEFINITION:- A rotary end cutting tool having two or more cutting lips, and having two or more spiral (helical) or
More information( This link will provide you with a list of all ISO-6983 G-Codes
CUSTOM HAZARDS CUSTOM HAZARDS CUSTOM HAZARDS In this lesson I am going to explain how to circle interpolate a 1/8-27 NPT with a formed thread E-Mill using G-Code on a vertical mill. I have provided the
More informationMASTER CATALOGUE. Beyond EADE Solid Ceramic End Mills.
MASTER CATALOGUE Beyond EADE Solid Ceramic End Mills Beyond EADE Solid Ceramic End Mill Primary Application EADE Solid Ceramic End Mills offer higher productivity and tool life in roughing nickel-based
More informationTools Step Drill Bits
Step Drill Bits ompany PLs -more & 1701 shown 1701T shown 1702 shown 1702T shown A Drives A s Split Point Step Drills The spiral flutes of RUKO high-performance step drills are BN-ground from the solid
More informationSERIES BXB Bottom Chamfer Thredfloers
SERIES BXB Bottom Chamfer s Size H2 H3 H4 H5 H6 H7 H8 H9 H10 H11 H12 H13 H14 0-80 10002 10003 10004 10005 10006 10007 1-64 10122 10123 10124 10125 10126 10127 1-72 10242 10243 10244 10245 10246 10247 2-56
More informationUN THREAD MILLS STRAIGHT FLUTE - SOLID CARBIDE FULL PROFILE SHANK DIA.
MILL Q MILL TRIGHT FLUTE - OLID CRIDE FULL PROFILE Optional short length-of-cut for ideal length-to-diameter ratio Cuts C, F, EF,, and J (internal only) Internal crest cutting design provides strongest
More informationMetal Drilling
www.irwin.com Metal Drilling Engineered for Controlled Precision and Speed Shank Diameter Shank Point Angle Drill Bit Diameter : The length from the point to the end of the drill bit Point Angle: The angle
More informationReamer Basics. Fixed Reamers The reamer size is fixed and any size reduction due to wear or sharpening cannot be reclaimed
1 Reamer Basics Reamers are available in a variety of types, materials, flute styles and sizes The typical reamer is a rotary cutting tools designed to machine a previously formed hole to an exact diameter
More informationPremium Carbide Cutting Tools
Volume 3 Premium Carbide Cutting Tools Made in the USA Proud Products of Sharp Cutter Grinding Co., LLC Sharp Cutter Grinding Company was founded in April 1984 by James V. Loftus along with his wife Karen,
More informationThread Mills.
Tool Selection Internal Threads......................................................S2 Tool Selection UN Internal Threads.......................................................S3 Indexable End Mills Weldon
More informationBASIC TECHNICAL INFORMATION FOR REAMERS FLUTE STYLES
BASIC TECHNICAL INFORMATION FOR HANNIBAL CARBIDE would like to inform you of some basic technical knowledge regarding reamers. Following these guidelines will reduce overall set-up time, while increasing
More informationMASONRY DRILL and CHISEL
MASONRY DRILL and CHISEL STRAIGHT SHANK MASONRY DRILL 8 Available in common size Made from carbide alloy Drill tip is welded with YG-carbide alloy steel Content of KW00537: Size: 4, 5, 6, 8, 0mm Content
More informationINNOVATIONS CATALOG Indexable Thread Milling
www.kennametal.com INNOVATIONS CATALOG Indexable Thread Milling NEW Indexable Thread Milling Products The latest Kennametal Indexable Thread Milling tools deliver longer tool life and higher productivity
More informationFlame. Tree Pointed. Product Barcode Price Ø Length Shank Code
Workshop Range 28 Carbide Burs 29 HSS Countersinks 29 HSS Deburring 30 HSS Step Drills 30 Thread Gauges 31 Warragul Dies 32 Screw Extractors 33 Grabit Screw Extractors 34 Black Books Are you passionate
More information323 and 365 Series SmoothFlute Variable Helix End Mills
323 and 365 Series SmoothFlute Variable Helix End Mills 323-365 High Speed Machining / HSM as well as traditional milling. Designed for advanced tool path software. Variable Helix where the helix changes
More informationDiamond Machine Works Achieves Breakthrough Capabilities in High Precision Parts
Diamond Machine Works Achieves Breakthrough Capabilities in High Precision Parts THE BUSINESS Aircraft parts manufacturer THE CLIENT Diamond Machine Works Seattle, Washington CAM SYSTEM Mastercam RESELLER
More informationCOFA. Consistent deburring through holes on Even & Uneven surfaces in any material HEULE. Case Study - Automotive. Study Details
Case Study - Automotive COFA Consistent deburring through holes on Even & Uneven surfaces in any material BEFORE AFTER COFA Tool ION 1,400 parts / day (2 holes per part) CNC Machining Center Low Carbon
More informationMetal Cutting - 5. Content. Milling Characteristics. Parts made by milling Example of Part Produced on a CNC Milling Machine 7.
Content Metal Cutting - 5 Assoc Prof Zainal Abidin Ahmad Dept. of Manufacturing & Industrial Engineering Faculty of Mechanical Engineering Universiti Teknologi Malaysia 7. MILLING Introduction Horizontal
More informationSpotlight
Spotlight 2010 www.vargus.com Specials Advanced Tailor Made Solutions Inserts Solid Carbide Toolholders Mega Line Special Solution for Extra Large Pitches (up to 24mm) Designed to be extra tough, use the
More informationESPRIT ProfitMilling A Technical Overview
ESPRIT ProfitMilling A Technical Overview Contents ProfitMilling : What is it? Benefits to Manufacturers Traditional Roughing Limitations ProfitMilling Advantages Benefits of ProfitMilling Energy Consumption
More informationAMERICAN MADE GLOBALLY RENOWNED NEW PREMIUM TOOL LINE! HIGH PERFORMANCE END MILLS FOR TIGHT TOLERANCE FINISHING OF FERROUS MATERIALS
NEW PREMIUM TOOL LINE! AMERICAN MADE GLOBALLY RENOWNED HIGH PERFORMANCE END MILLS FOR TIGHT TOLERANCE FINISHING OF FERROUS MATERIALS www.conicalendmills.com www.globalcuttingtools.com TIGHT TOLERANCE FINISHING
More informationFig. N 1 The indexing error between two consecutive flutes: (this must be measured half way up the tooth) as indicated in figure N 2.
Hob resharpening The accuracy of the hobbing process to a large extent on good hob resharpening and the performance of hob is very much affected by the type of resharpening carried out. If a hob is resharpened
More informationWhat Does A CNC Machining Center Do?
Lesson 2 What Does A CNC Machining Center Do? A CNC machining center is the most popular type of metal cutting CNC machine because it is designed to perform some of the most common types of machining operations.
More informationFMA 2000 / 5 FMA 63 / 5 FM 1000 / FM 25 / Copy Milling Program Tool Contents. Milling Cutters Identification System Arbor
Copy Milling Program Tool Contents FM Style 1 Toroid Cylindrical End Milling Cutter 42/43 FM Style 2 Toroid Taper End Milling Cutter 42/43 FMA Arbor Style Milling Cutter 42/43 Insert ata 44/45 Cutting
More informationListed below are some of our most common drill designs used in many various aerospace applications:
www.lomas.co.uk Tools can be manufactured in 3 material choices for use on composites: Solid Tungsten Carbide Tooling CVD Diamond Coated Solid Tungsten Carbide Polycrystalline Diamond (PCD) LOMAS design
More information2. Special tools. swiss made
2. Special tools 13 14 2. Special tools SPECIAL 701S tools page 17 Turning tool with profiled insert page 30 Special T-slot cutters and end mills page 25 Offset whirl thread cutters page 31 Step drills
More informationCopy Milling Program Tools
Millstar face mills are equally useful on newer high velocity machines and older slower equipment and will optimize milling performance of all your machine tools. The hardened tool bodies can be run at
More informationThreading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets
Threading Threading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets Threading Threading Index 148 Threading Taps Carded 149 Threading Taps Bulk Metric 150 Threading Taps Bulk Metric
More informationFigure N 1- Characteristic angles of a drill
Basic of drill In these technical descriptions for simplicity we use the term drill instead of the more complete name twist drill bits. The drill is the tool universally used to make holes in any material.
More informationFMA 2000 / 5 FMA 63 / 5 FM 1000 / FM 25 / Copy Milling Program Tool Contents. Milling Cutters Identification System Arbor
Copy Milling Program Tool Contents FM Style 1 Toroid Cylindrical End Milling Cutter 38/39 FM Style 2 Toroid Taper End Milling Cutter 38/39 FMA Arbor Style Milling Cutter 38/39 Insert ata 40/41 Cutting
More informationThe Engineer s Guide to Identifying Lead Screw Thread Forms
The Engineer s Guide to Identifying Lead Screw Thread Forms Thread Forms There are hundreds of different thread forms that have been designed over several decades. There are only a few specific thread
More informationTool and Die Maker Level 2
Level 2 B2 Read and Interpret Drawings II Duration: 32 hours 32 hours 0 hours This unit of instruction introduces the Tool and Die Maker Apprentice with the knowledge and skills necessary to read and interpret
More informationDEAL. Victory Shoulder Mill Series Starter KITS: VSM11 and VSM17 Cutter with 10 Inserts, Starter KITS. VSM490 Cutter with 20 Inserts
Victory Shoulder Mill Series Starter KITS: VSM11 and VSM17 Cutter with 10 Inserts, DEAL VSM490 Cutter with 20 Inserts The Victory Shoulder Mill Series is a high-performance, versatile, robust, 90 square
More informationComputer Numeric Control
Computer Numeric Control TA202A 2017-18(2 nd ) Semester Prof. J. Ramkumar Department of Mechanical Engineering IIT Kanpur Computer Numeric Control A system in which actions are controlled by the direct
More informationUPDATE. NEW Gold-QuadF 09 09mm IC Insert Sizes
Styles: End Mill 15G1F Face Mill 5G5F, 5G6F s: 1.000" - 3.000" Inserts: SDXS0904MPR-MM SDXS0904MPR-MR SDXS0904MPR-MR1 Grades: IN4004 IN4005 IN4030 IN4035 UPDATE NEW Gold-QuadF 09 09mm IC Insert Sizes Features
More informationTOTEM High Speed Steel Taps
TOTEM High Speed Steel Taps "TOTEM" high precision HSS Taps & Dies are manufactured from high quality imported High Speed Steels. Strict quality control at all stages, rigid inspection with sophisticated
More informationsolid carbide tools 100% cnc manufactured in the usa
solid carbide tools 100% cnc manufactured in the usa V w isi w t w ou. C dura r w at m eb 20 al ill si 09 og.co te m Maximum Performance End Mills Series Product Page# WK-3-R WK-3 WK-3-ER WK-BN-3 WK-4-R
More informationThe Catalogue of Nomura Tool Works Co., Ltd. Tool manufacturing since 1954 Bent Shank Taps Nib Taps Nut Taps
The Catalogue of Nomura Tool Works Co., Ltd. Tool manufacturing since 1954 Bent Shank Taps Nib Taps Nut Taps Introduction In today's highly developed machine industry, a tap is a cutting tool that requires
More informationThreading - Hand Taps - Button Dies - Die Nuts - Screw Extractors - Holders - Sets THREADING
Threading - Hand Taps - Button Dies - Die Nuts - Screw Extractors - Holders - Sets THREADING Threading Threading Index 198 Dies Carbon, Button Dies BA 198 Dies Carbon, Button Dies BSB 197 Dies Carbon,
More informationThreading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets
THREADING Threading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets Threading Index Hand Taps - Carded Metric Coarse UNF BSW 93 93 93 Hand Taps - Bulk Metric Coarse Metric Fine Metric
More informationAircraft Quality Reamers and Special Tooling
C A T A L O G 2 6 www.reamers.com Aircraft Quality Reamers and Special Tooling Manufactured in the USA since 1881 AIRCRAFT QUALITY REAMERS AND SPECIAL TOOLING P R O V E N P R E C I S I O N Since 1881,
More informationChapter 23: Machining Processes: Turning and Hole Making
Manufacturing Engineering Technology in SI Units, 6 th Edition Chapter 23: Machining Processes: Turning and Hole Making Chapter Outline 1. Introduction 2. The Turning Process 3. Lathes and Lathe Operations
More informationSPOTLIGHT 2018 METRIC
SPOTLIGHT 2018 METRIC Advanced Threading Solutions Innovative Grooving & Turning Solutions www.vargus.com Thread Turning External Toolholders with Coolant Thru Precise coolant thru, designed to efficiently
More informationEnd Mills 4. Cutting Tools 1 (Cont d) End-mills (Cont d)
Outline Review of Milling Cutting Tools Milling Milling Operations Workpiece Materials Tool Selection Machining Tips Toolholders Fixtures Cutting Tools HSS tools Coated (TiN, Al O 3, TiAlN,...) versions
More informationThread Milling Tools
Thread Milling Tools 1 MIING INRODUCTION SOID MIING TOOS ISO HEICA FUTES UN HEICA FUTES NPT HEICA FUTES NPTF HEICA FUTES BSP HEICA FUTES BSPT HEICA FUTES PARTIA PROFIE SINGE TOOTH ISO TEETH 2D ISO TEETH
More informationFeatuRes OF GeOMetRy. synchro tapping chuck (er type) advantages. GUIdE LINE TO ICONS
FeatuRes OF GeOMetRy synchro tapping chuck (er type) advantages GUIdE LINE TO ICONS Working Material GS s with good machinability Rm
More informationSpotlight.
Spotlight www.vargus.com Professional Threading Solutions Expanded Line of Thread Turning Solutions for the Oil and Gas Industry Solutions for Rotary Drill Stem Connections Unique insert design with strengthened
More informationAdvanced tools for industry Precision crafted excellence Group 700 Solid Carbide Burs (Inch)
Advanced tools for industry Precision crafted excellence Group 700 Solid Carbide Burs (Inch) Phone: 310-464-8050 Fax: 310-464-8058 sales@bestcarbide.com www.bestcarbide.com Performance: Optimized carbide
More informationTap Drill Chart. Metric Tap Drill Size (Recommended Drill Sizes Suitable for 6H Tolerance) Roll Form Tap Drill Size
Tap Drill Chart Tap Size Nom. Size Tap Cutting Tap Drill Size Metric Tap Drill Size (Recommended Drill Sizes Suitable for 6H Tolerance) Roll Form Tap Drill Size Machine Screw Sizes NC & NF Tap Size Cutting
More informationMELIN TOOL COUNTERSINKS
MELIN TOOL COUNTERSINKS TABLE OF CONTENTS GENERAL PURPOSE Zero Flute, Single Edge - HSS Zero Flute, Single Edge - Cobalt HSS Single Flute - HSS Single Flute - Cobalt HSS (M42) Single Flute, TiN Coated
More informationThink efficiency, Think HSS MILLING
Think efficiency, Think HSS MILLING SUMMARY MILLING TOOLS 2 Zoom on a milling cutter 3 Which HSS for maximum efficiency? 4 Coatings for the best performance 5 Vocabulary 6 Choose the right design 7 Select
More information