Mors Smitt Industrial Technology. General purpose relays

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Mors Smitt Industrial Technology. General purpose relays"

Transcription

1 Mors Smi Indusrial Technology General purpose relays

2

3 Mors Smi Indusrial Technology General purpose relays

4 Mors Smi - Indusrial Technology Mors Smi has been manufacuring relays since Our wide relay porfolio is focused on markes secors like; power generaion & disribuion, facory auomaion, pero-chemical and waer reamen plans and general indusrial requiremens. Producion is flexible, sandards unforgiving. Many unis are ailored o specific clien requiremens. All producs go hrough exensive esing processes wih boh hardware and producion mehodology approved o he highes sandards. General purpose relays Our high qualiy general purpose relays are applied mainly in indusrial and power auomaion sysems, in signalling and proecion sysems, and in oher conrol and elecric drive sysems. They are also suiable for more common conroling applicaions like building auomaion or HVAC sysems. The main producs of Mors Smi have been successfully applied in indusrial auomaion for many years. Their reliabiliy and qualiy have been acknowledged by he Cusomers saisfacion. Mors of he relays are recognized and cerified by: CE, Loyds, UL and VDE and mee he requiremens of he RoHS direcive. Reliabiliy Worldwide availabiliy is assured by a nework of professional, rained and dedicaed subsidiaries, disribuors and agens, offering local service and suppor. Mors Smi has cerified qualiy and environmenal managemen sysems according he leading inernaionals sandards. ISO 9001:2008 and ISO are obained. Mors Smi no only has a clear eye direced a reliabiliy, dependabiliy, safey and cos-effeciveness, bu also o he demands of our plane. Environmenal consciousness is woven closely ino design, manufacuring and commercial operaions. The company is conribuing o he safey of he world in more ways han one. Mors Smi is par of Wabec Corporaion, he NYSE sock exchange lised, global supplier of highly engineered componens and soluions for rail and seleced indusrial markes. Operaions in 17 counries and world wide sales in over 100 counries. Wabec Corporaion holds over paens and has world class inernal processes based on lean manufacuring and coninuous improvemen principles (Wabec Performance Sysem). Wihin he Wabec group Mors Smi has is own name & ideniy and is focused on saisfying he needs of cusomers in he power grid, indusry and insallaion secors. Urech, January 2016 Mors Smi B.V. coninuous o improve is producs and services. Specificaions can be changed wihou prior noice. No righs can be derived from specificaions in his brochure. Changes and prined errors reserved. 5

5 Conen General purpose relays Indusrial relays Page S-relays Miniaure plug-in / PCB relays, suiable for swiching up o 16 A or 2 changeover conacs Opional LED indicaion module Plug-in / PCB connecion possibiliies Various opions possible M-relays Universal plug-in / PCB relay, suiable for swiching up o 12 A. 15 2, 3 or 4 changeover conacs Manual es buon Mechanical saus indicaion Opional LED indicaion Various opions possible G-relays Universal plug-in relay, suiable for swiching of load up o 10 A changeover conacs Manual es buon Mechanical saus indicaion Various opions possible L-relays Universal plug-in / PCB relay, suiable for swiching up o 12 A changeover conacs LED indicaion I-relays Inerface relay, suiable for swiching load up o 16 A. 28 Buil-in diode LED indicaion XT-relays Universal relay, suiable for swiching up o 16 A or 3 changeover conacs Buil-in diode Clear LED indicaion Time relays XT-relays Time relays, suiable for swiching up o 16 A. 38 1, 2 or 3 changeover conacs Adjusable ime delay LED indicaion Monioring relays XM-relays Measure and monioring relays or 2 changeover conacs 1 or 3 phase proecion Adjusable ime delay LED indicaion Suiable for rail mouning 7

6 Sandards & approvals Sandards & approvals are designed and manufacured wih umos care for reabiliy and durabiliy. The relays are in compliance wih he leading inernaional sandards. EN EN EN EN EN VDE 0435 EN EN Approvals Relay design, specificaions and environmenal condiions. Elecrical relays. Relay design, specificaions and environmenal condiions. Basic relays. Low volage swich gear and conrol gear. Elecromechanical conac and moor sarers. Elecromechanical componens for conrol applicaions. This sandard examines boh coil and conac specificaions in deph. German sandard specifies regulaions for elecrical relays in conrol applicaions, which are relaed o EN and EN European sandard describes he proecion class (IP code). This sandard corresponds o VDE 0470 and DIN European sandard specifying weld no ransfer conacs. Are menioned a each specific relay series (VDE, UL, CSA, CCC, Lloyd s, ec.). General specificaions All conac specificaions in he brochure are for swiching resisive loads in AC volage The M-, G- and L-relais pinning is according he world wide indusry sandards Conac descripions Inernaional USA ANSI Normally open conac N/O SPST-NO form A Normally closed conac N/C SPST-NC form B 1 changeover conac 1 C/O SPDT form C 2 changeover conacs 2 C/O DPDT form C 3 changeover conacs 3 C/O 3PDT form C 4 changeover conacs 4 C/O 4PDT form C 1 double break / double make conac 1 C/O DB/DM SPDT (DB/DM) form Z 4 double break / double make conac 4 C/O DB/DM 4PDT (DB/DM) form Z 8

7 Indusrial relays Our high qualiy general purpose relays are applied mainly in indusrial and power auomaion sysems, in signalling and proecion sysems, and in oher conrol and elecric drive sysems. They are also suiable for more common conrolling applicaions like building auomaion or HVAC sysems. 9

8 Indusrial relays Selecor Indusrial relays The basic feaures of general purpose relays are: Conac number: from 1 o 4 Raed conac swiching currens up o 16 A, depending on he relay ype Versions wih coil overvolage suppression Versions wih flag indicaors and manual relay es pushbuons wih he possibiliy of laching he normally open conacs closed Mouning sockes for 35 mm rail or PCB soldering Rail sockes equipped wih screw erminals or spring erminals The main producs of Mors Smi have been successfully applied in indusrial auomaion for many years. Their reliabiliy and qualiy have been acknowledged by he cusomers saisfacion. Visi for more informaion. Relay selecion Type Coil volage Changeover onac(s) Raed coninuous curren Conac maerial Gold conacs Diode Mechanical indicaor LED indicaion Manual esbuon Plug-in PCB 35 mm rail mouning Page S1 Various 1 16 A AgNi * * o o 11 S2 Various 2 8 A AgNi * * o o 12 M2 Various 2 12 A AgNi * * o * o o 16 M3 Various 3 10 A AgNi * * o * o o 17 M4 Various 4 6 A AgNi * * o * o o 18 G08 Various 2 10 A AgNi * * o o 22 G11 Various 3 10 A AgNi * * o o 23 L2 Various 2 12 A AgNi o o 26 I1 Various 1 6 A AgSnO 2 o o o 28 XT-17M VAC 1 16 A AgSnO 2 o o 30 XT-17M VAC 3 8 A AgNi o o 31 XT-17M-316/24 24 VAC/DC 3 16 A AgSnO 2 o o 32 XT-17M-316/ VAC 3 16 A AgSnO 2 o o 33 * Opional feaure 10

9 Indusrial relays S-relays S1 Plug-in / PCB-relay 16 A, 1 changeover conac Universal miniaure relay wih 1 changeover conac. Opional he relay can be equipped wih LED indicaion or diode module Available in differen volage 1 changeover conac 16 A AgNi conacs (AgSnO 2 opional) Wide volage range Plug-in & PCB sockes available Connecion diagram Conac specificaions Conac maerial Number & configuraion Raed coninuous curren Max. inrush curren Max. swiching volage Min. swiching volage Min. swiched curren Coil specificaions Nominal volage (Un DC) Nominal volage (Un AC) Power consumpion (DC/AC) Operaing range AgNi 1 C/O 16 A 30 A / < 3 s 440 VAC 10 V 10 ma VDC 230 VAC 0.9 W / 1.6 VA AC Un AC Un Technical daa Mechanical life cycles > 30 x 107 Ambien emperaure DC: -40 o C o C AC: -40 o C o C Proecion caegory Connecion Plug-in / PCB 29 x 15.7 x 12.7 mm Weigh 14 g Deailed informaion and daashees are available on Ordering codes S1-D VDC S1-D VDC S1-A VAC

10 Indusrial relays S-relays Insananeous S2 Plug-in / PCB-relay 8 A, 2 changeover conacs Universal miniaure relay wih 2 changeover conacs. Opional he relay can be equipped wih LED indicaion or diode module Available in differen volage 2 changeover conacs 8 A AgNi conacs (AgSnO 2 opional) Wide volage range Plug-in & PCB sockes available Connecion diagram Conac specificaions Conac maerial Number & configuraion Raed coninuous curren Max. inrush curren Max. swiching volage Min. swiching volage Min. swiched curren Coil specificaions Nominal volage (Un DC) Nominal volage (Un AC) Power consumpion (DC/AC) Operaing range AgNi 2 C/O 8 A 15 A / < 3 s 440 VAC 10 V 10 ma VDC 230 VAC 0.48 W / 0.75 VA AC Un AC Un Technical daa Mechanical life cycles > 30 x 107 Ambien emperaure DC: -40 o C o C AC: -40 o C o C Proecion caegory Connecion Plug-in / PCB 29 x 15.7 x 12.7 mm Weigh 14 g Deailed informaion and daashees are available on Ordering codes S2-D VDC S2-D VDC S2-A VAC

11 Indusrial relays S-relays Ordering codes S1-relays Coil volage Type Aricle number 12 VDC S1-D VDC S1-D VAC S1-A Oher volages on reques S2-relays Coil volage Type Aricle number 12 VDC S2-D VDC S2-D VAC S2-A Oher volages on reques Sockes Type VS-2L Applicable for S1 & S2 relays Conac raing 12 A Connecion Screw Mouning 35 mm rail 75.3 x 61 x 15.5 mm Weigh 42 g Aricle number

12 Indusrial relays S-relays Accesories Type MS-2L CS-1 DPS-1 S-connec-5 Descripion Reaining clip Reaining clip Descripion plae Inerconnnecion srip Mouning VS-sockes VS-sockes VS-sockes VS-sockes Applicable for S1 & S2 relay S1 & S2 relays S1 & S2 relays S1 & S2 relays Maerial Plasic Meal Plasic Plasic Aricle nuumber Type Schemaic Volage Colour Aricle Nr. DM-1 Limis overvolage on DC coils. +A2 -A VDC DM-2 Limis overvolage on DC coils DLM-3R Limis overvolage on DC coils Coil energizing indicaion DLM-3G Limis overvolage on DC coils Coil energizing indicaion -A2 +A1 +A2 -A VDC VDC VDC VDC 6-12 VDC VDC VDC Red Red Red Green Green Green DLM-4R Limis overvolage on DC coils Coil energizing indicaion DLM-4G Limis overvolage on DC coils Coil energizing indicaion -A2 +A VDC VDC VDC 6-12 VDC VDC VDC Red Red Red Green Green Green RCM-5 Proecion agains EMC disurbance Limis overvolage A2 A VAC VAC VAC LM-6R Coil energizing indicaion LM-6G Coil energizing indicaion ~A2 ~A VAC/DC VAC/DC VAC/DC 6-12 VAC/DC VAC/DC VAC/DC Red Red Red Green Green Green LVM-7R Limis overvolage on AC and DC coils Coil energizing indicaion LVM-7G Limis overvolage on AC and DC coils Coil energizing indicaion ~A2 ~A VAC/DC VAC/DC VAC/DC 6-12 VAC/DC VAC/DC VAC/DC Red Red Red Green Green Green VM-8 Limis overvolage on AC coils No indicaion A2 A1 24 VAC 130 VAC 230 VAC RM-9 Limis overvolage on AC coils A2 A VAC

13 Indusrial relays M-relays M2 Miniaure, universal, 2-pole 12 A, 2 changeover conacs Miniaure, universal relay, supplied wih 2 changeover conacs. Sandard supplied wih mechanical indicaion and manual es buon. LED-indicaion and a pluggable diode module opional. Connecion diagram A1(13)+ 11(9) 41(12) A2 (14)+ 14 (5) 12 (1) 44 (8) 42(4) Various coil volages 2 changeover conacs 12 A AgNi conacs (AgNi/Au 0.2 µm opional) Mechanical indicaor Manual es buon Diode module opional LED-indicaor opional PCB-connecion opional Plug-in connecion Conac specificaions Conac maerial Number & configuraion Raed coninuous curren (ACI, IEC 60947) Raed load (capaciy) AC1 Raed load (capaciy) DC1 Max. inrush curren Max. swiching volage Min. swiching volage Min. swiched curren Coil specificaions Nominal volage (Un DC) Nominal volage (Un AC) Power consumpion (DC/AC) Operaing range AgNi 2 C/O 12 A 12 A / 250 VAC 12 A / 24 VDC 24 A 440 VAC 10 V 5 ma VDC VAC 0.9 W / 1.6 VA Un Technical daa Mechanical life cycles > 2 x 107 Pull-in ime DC/AC 10/13 ms Release ime DC/AC 8/3 ms Ambien emperaure DC: -40 o C o C, AC: -40 o C o C Proecion caegory Connecion Plug-in 27.5 x 21.2 x 35.6 mm Weigh 35 g Ordering codes M2-D VDC M2-D VDC M2-D VDC Remarks Sandard AC coil is 50/60 Hz Available as PCB-version or wih PCB-sockes on reques Deailed informaion and daashees are available on + LED-indicaion M2-L-D VDC M2-L-D VDC M2-L-D VDC More ordering codes page 18 15

14 Indusrial relays M-relays M3 Miniaure, universal, 3-pole 10 A, 3 changeover conacs Miniaure, universal relay, supplied wih 3 changeover conacs. Sandard supplied wih mechanical indicaion and manual es buon. LED indicaion and a pluggable diode module opional. Connecion diagram A1(13)+ 11(7) 21(8) 31(9) A2 (14)- 14 (4) 12 (1) 24 (5) 22 (2) 34 (6) 32 (3) Various coil volages 3 changeover conacs 10 A AgNi conacs (AgNi/Au 0.2 µm opional) Mechanical indicaor Manual es buon Diode module opional LED-indicaor opional PCB-connecion opional Plug-in connecion Conac specificaions Conac maerial Number & configuraion Raed coninuous curren (ACI, IEC 60947) Raed load (capaciy) AC1 Raed load (capaciy) DC1 Max. inrush curren Max. swiching volage Min. swiching volage Min. swiched curren AgNi 3 C/O 10 A 10 A / 250 VAC 10 A / 24 VDC 20 A 440 VAC 10 V 5 ma Coil specificaions Nominal volage (Un DC) Nominal volage (Un AC) Power consumpion (DC/AC) Operaing range VDC VAC 0.9 W / 1.6 VA Un Technical daa Mechanical life cycles > 2 x 107 Pull-in ime DC/AC 10/13 ms Release ime DC/AC 8/3 ms Ambien emperaure DC: -40 o C o C, AC: -40 o C o C Proecion caegory Connecion Plug-in 27.5 x 21.2 x 35.6 mm Weigh 35 g Ordering codes M3-D VDC M3-D VDC M3-D VCD Remarks Sandard AC coil is 50/60 Hz Available as PCB-version or wih PCB-sockes on reques Deailed informaion and daashees are available on + LED-indicaion M3-L-D VDC M3-L-D VDC M3-L-D VDC More ordering codes page 18 16

15 Indusrial relays M-relays M4 Miniaure, universal, 4-pole 6 A, 4 changeover conacs Miniaure, universal relay, supplied wih 4 changeover conacs. Sandard supplied wih mechanical indicaion and manual es buon. LED-indicaion and a pluggable diode module opional. Connecion diagram A1(13)+ 11(9) 21(10) 31(11) 41(12) A2 (14)- 14 (5) 12 (1) 24 (6) 22 (2) 34 (7) 32 (3) 44 (8) 42 (4) Various coil volages 4 changeover conacs 6 A AgNi conacs (AgNi/Au 0.2 µm opional) Mechanical indicaor Manual es buon Diode moduleopional LED-indicaor opional PCB-connecion opional Plug-in connecion Conac specificaions Conac maerial Number & configuraion Raed coninuous curren (ACI, IEC 60947) Raed load (capaciy) AC1 Raed load (capaciy) DC1 Max. inrush curren Max. swiching volage Min. swiching volage Min. swiched curren AgNi 4 C/O 6 A 6 A / 250 VAC 6 A / 24 VDC 12 A 250 VAC 10 V 5 ma Coil specificaions Nominal volage (Un DC) Nominal volage (Un AC) Power consumpion (DC/AC) Operaing range VDC VAC 0.9 W / 1.6 VA Un Technical daa Mechanical life cycles > 2 x 107 Pull-in ime DC/AC 10/13 ms Release ime DC/AC 8/3 ms Ambien emperaure DC: -40 o C o C, AC: -40 o C o C Proecion caegory Connecion Plug-in 27.5 x 21.2 x 35.6 mm Weigh 35 g Ordering codes M4-D VDC M4-D VDC M4-D VDC Remarks Sandard AC coil is 50/60 Hz Available as PCB-version or wih PCB-sockes on reques Deailed informaion and daashees are available on + LED-indicaion M4-D VDC M4-D VDC M4-D VDC More ordering codes page 18 17

16 Indusrial relays M-relays Ordering codes M2-relays Coil volage Type Aricle number + LED-indicaion Aricle Number 12 VDC M2-D M2-L-D VDC M2-D M2-L-D VDC M2-D M2-L-D VDC M2-D M2-L-D VDC M2-D M2-L-D VDC M2-D M2-L-D VAC 50/60Hz M2-A M2-L-A VAC 50/60Hz M2-A M2-L-A VAC 50/60Hz M2-A M2-L-A VAC 50/60Hz M2-A M2-L-A VAC 50/60Hz M2-A M2-L-A Oher volages on reques M3-relays Coil volage Type Aricle number + LED-indicaion Aricle Number 12 VDC M3-D M3-L-D VDC M3-D M3-L-D VDC M3-D M3-L-D VDC M3-D M3-L-D VDC M3-D M3-L-D VDC M3-D M3-L-D VAC 50/60Hz M3-A M3-L-A VAC 50/60Hz M3-A M3-L-A VAC 50/60Hz M3-A M3-L-A VAC 50/60Hz M3-A M3-L-A VAC 50/60Hz M3-A M3-L-A Oher volages on reques M4-relays Coil volage Type Aricle number + LED-indicaion Aricle Number 12 VDC M4-D M4-L-D VDC M4-D M4-L-D VDC M4-D M4-L-D VDC M4-D M4-L-D VDC M4-D M4-L-D VDC M4-D M4-L-D VAC 50/60Hz M4-A M4-L-A VAC 50/60Hz M4-A M4-L-A VAC 50/60Hz M4-A M4-L-A VAC 50/60Hz M4-A M4-L-A VAC 50/60Hz M4-A M4-L-A Oher volages on reques 18

17 Indusrial relays M-relays Accessories Type MS-35 CM-1 DPM-1 M-connec-5 Name Relay reaining clip Relay reaining clip Descripion plae Inerconnecion srip Mouning on VM-sockes VM-sockes VM-sockes VM-sockes Applicable for M2-, M3-, M4 relays M2-, M3-, M4 relays M2-, M3-, M4 relays M2-, M3-, M4 relays Maerial Plasic Meal Plasic Weigh 4 g Aricle number Type Schemaic Volage Colour Aricle Nr. DM-1 Limis overvolage on DC coils. +A2 -A VDC DM-2 Limis overvolage on DC coils DLM-3R Limis overvolage on DC coils Coil energizing indicaion DLM-3G Limis overvolage on DC coils Coil energizing indicaion -A2 +A1 +A2 -A VDC VDC VDC VDC 6-12 VDC VDC VDC Red Red Red Green Green Green DLM-4R Limis overvolage on DC coils Coil energizing indicaion DLM-4G Limis overvolage on DC coils Coil energizing indicaion -A2 +A VDC VDC VDC 6-12 VDC VDC VDC Red Red Red Green Green Green RCM-5 Proecion agains EMC disurbance Limis overvolage A2 A VAC VAC VAC LM-6R Coil energizing indicaion LM-6G Coil energizing indicaion ~A2 ~A VAC/DC VAC/DC VAC/DC 6-12 VAC/DC VAC/DC VAC/DC Red Red Red Green Green Green LVM-7R Limis overvolage on AC and DC coils Coil energizing indicaion LVM-7G Limis overvolage on AC and DC coils Coil energizing indicaion ~A2 ~A VAC/DC VAC/DC VAC/DC 6-12 VAC/DC VAC/DC VAC/DC Red Red Red Green Green Green VM-8 Limis overvolage on AC coils No indicaion A2 A1 24 VAC 130 VAC 230 VAC RM-9 Limis overvolage on AC coils A2 A VAC

18 Indusrial relays M-relays Sockes Type VM-2R VM-3R VM-4R Applicable for M2 M3 M4 Conac raing AC1 12 A 10 A 6 A Terminals Screw Screw Screw Mouning 35 mm rail 35 mm rail 35 mm rail Sandards CE, EN CE, EN CE, EN x 27 x 42.5 mm 76.3 x 27 x 42.5 mm 76.3 x 27 x 42.5 mm Weigh 61 g 61 g 61g Aricle number Type VM-2L VM-3L VM-4L Applicable for M2 M3 M4 Conac raing AC1 12 A 10 A 6 A Terminals Screw Screw Screw Mouning 35 mm rail 35 mm rail 35 mm rail Sandards CE, EN CE, EN CE, EN x 27 x 61 mm 75 x 27 x 61 mm 75 x 27 x 61 mm Weigh 71 g 71 g 71g Aricle number Type VM-4 VM-4CC VM-2PCB VM-4PCB Applicable for M4 M4 M2 M4 Conac raing AC1 12 A 6 A 12 A 6 A Terminals Screw Spring Soldering Soldering Mouning 35 mm rail 35 mm rail PCB PCB Sandards CE, EN CE, EN CE CE 66.4 x 29.5 x 29 mm 95 x 31 x 29 mm 29.2 x 21.6 x 11.2 mm 29.2 x 21.6 x 11.2 mm Weigh 55 g 74 g 6 g 6 g Aricle number

19 Indusrial relays M-relays VM-2R, VM-3R, VM-4R VM-2L, VM-3L, VM-4L VM-4 VM-4CC VM-2PCB, VM-4PCB 21

20 Indusrial relays G-relays G08 Universal, 2-pole 10 A, 2 changeover conacs Universal relay, supplied wih 2 changeover conacs. Sandard supplied wih mechanical indicaion and manual es buon. LED-indicaion and a pluggable diode module opional. Various coil volages 2 changeover conacs 10 A AgNi conacs (AgNi/Au 0.2 µm opional) Mechanical indicaor Manual es buon Diode module opional LED-indicaor opional Plug-in connecion, ocal pinning Connecion diagram A1(2)+ 11(1) 21(8) A2 (7)- 14 (3) 12 (4) 24 (6) 22 (5) ,4 Conac specificaions Conac maerial AgNi Number & configuraion 2 C/O Raed coninuous curren (ACI, IEC 60947) 10 A Raed load (capaciy) AC1 10 A / 250 VAC Raed load (capaciy) DC1 10 A / 24 VDC Max. inrush curren 20 A Min. swiching volage 10 V Min. swiched curren 5 ma Coil specificaions Nominal volage (Un DC) VDC Nominal volage (Un AC) VAC Power consumpion (DC/AC) 1.5 W / 2.8 VA Operaing range Un Technical daa Mechanical life cycles > 2 x 107 Pull-in ime DC/AC 18/12 ms Release ime DC/AC 7/10 ms Ambien emperaure -40 o C o C Proecion caegory Connecion Plug-in 35 x 35 x 54.4 mm Weigh 83 g Remarks Sandard coil is 50/60 Hz Ordering codes G08-D VDC G08-D VDC G08-D VDC Deailed informaion and daashees are available on + LED-indicaion G08-L-D VDC G08-L-D VDC G08-L-D VDC More ordering codes page 24 22

21 Indusrial relays G-relays G11 Universal, 3-pole 10 A, 3 changeover conacs Universal relay, supplied wih 3 changeover conacs. Sandard supplied wih mechanical indicaion and manual es buon. LED-indicaion and a pluggable diode module opional Various coil volages 3 changeover conacs 10 A AgNi conacs (AgNi/Au 0.2 µm opional) Mechanical indicaor Manual es buon Diode module opional LED-indicaor opional Plug-in connecion, ocal pinning Connecion diagram A1(2)+ 11(1) 21(6) A2 (10)- 14 (3) 12 (4) 24 (7) 22 (5) ,4 31(11) 34 (9) 32 (8) Conac specificaions Conac maerial AgNi Number & configuraion 3 C/O Raed coninuous curren (ACI, IEC 60947) 10 A Raed load (capaciy) AC1 10 A / 230 VAC Raed load (capaciy) DC1 10 A / 24 VDC Max. inrush curren 20 A Min. swiching volage 10 V Min. swiched curren 5 ma Coil specificaions Nominal volage (Un DC) VDC Nominal volage (Un AC) VAC Power consumpion (DC/AC) 1.5 W / 2.8 VA Operaing range Un Technical daa Mechanical life cycles > 2 x 107 Pull-in ime DC/AC 18/12 ms Release ime DC/AC 7/10 ms Ambien emperaure -40 o C o C Proecion caegory Connecion Plug-in 35 x 35 x 54.4 mm Weigh 83 g Remarks Sandard coil is 50/60 Hz Ordering codes G11-D VDC G11-D VDC G11-D VDC Deailed informaion and daashees are available on + LED-indicaion G11-L - D VDC G11-L - D VDC G11-L - D VDC More ordering codes page 24 23

22 Indusrial relays G-relays Ordering codes G08-relays Coil volage Type Aricle number + LED indicaion Aricle Number 12 VDC G08-D G08-L-D VDC G08-D G08-L-D VDC G08-D G08-L-D VDC G08-D G08-L-D VDC G08-D G08-L-D125 on reques 220 VDC G08-D G08-L-D VAC 50/60Hz G08-A G08-L-A VAC 50/60Hz G08-A G08-L-A VAC 50/60Hz G08-A G08-L-A VAC 50/60Hz G08-A G08-L-A VAC 50/60Hz G08-A G08-L-A Oher volages on reques G11-relays Coil volage Type Aricle number + LED indicaion Aricle Number 12 VDC G11-D G11-L-D VDC G11-D G11-L-D VDC G11-D G11-L-D030 on reques 48 VDC G11-D G11-L-D VDC G11-D G11-L-D VDC G11-D G11-L-D VDC G11-D G11-L-D VAC 50/60Hz G11-A G11-L-A VAC 50/60Hz G11-A G11-L-A VAC 50/60Hz G11-A G11-L-A VAC 50/60Hz G11-A G11-L-A VAC 50/60Hz G11-A G11-L-A Oher volages on reques 24

23 Indusrial relays G-relays Accessories Type T-21 CG-1 Com-3TP Name Relay reaining clip Mulifuncion imer module Applicable for G08-, G11 relays G08-, G11 relays G08-, G11 relays Aricle number ime ranges (0.05 s h) 8 differen ime funcions Funcion and ime seing by dipswich for fine uning. Funcions F - Delay- ON R - Delay- OFF (+ conrol conac) Ws - One sho- ON (+ conrol conac) Wa - One sho- OFF (+ conrol conac) Wu - One sho- ON Es - Delay- ON (+ conrol conac) Bp - Flasher, saring OFF Bi - Flasher, saring ON Sockes Type VG-8T VG-11T VG-8PCB VG-11PCB Applicable for G08 G11 G08 G11 Conac raing AC1 10 A 10 A 10 A 10 A Terminals Screw Screw Screw Screw Mouning 35 mm rail or wall 35 mm rail or wall PCB PCB Sandards EN / CE EN / CE CE CE 75 x 38 x 26 mm 75 x 38 x 26 mm Ø 27 x 19.1 mm Ø 27 x 19.1 mm Weigh 50 g 62 g 9 g 9 g Aricle number

24 Indusrial relays L-relays L2 Miniaure, universal 12 A, 2 changeover conacs Miniaure universal relay, supplied wih 2 changeover conacs. Sandard supplied wih back EMF diode (for DC coils) and LED-indicaion. Various coil volages 2 changeover conacs 12 A AgNi conacs (AgNi/Au 0.2 µm opional) Back EMF diode Plug-in connecion, fason Connecion diagram A1(7)+ 11(5) 41(6) A2 (8)- 14 (3) 12 (1) 44 (4) 42 (2) Conac specificaions Conac maerial Number & configuraion Raed coninuous curren (ACI, IEC 60947) Raed load (capaciy) AC1 Raed load (capaciy) DC1 Max. inrush curren Max. swiching volage Min. swiching volage Min. swiched curren AgNi 2 C/O 12 A 12 A / 25 VAC 12 A / 30 VDC 20 A 250 VAC 5 V 5 ma 27,5 21,1 Coil specificaions Nominal volage (Un DC) Nominal volage (Un AC) Power consumpion (DC/AC) Operaing range VDC VAC 1.1 W / 1.9 VA Un 0,5 4,8 4 4,7 5,9 7,25 34,5 6,4 Technical daa Mechanical life cycles > 10 x 107 Pull-in ime DC/AC 15/15 ms Release ime DC/AC 10/10 ms Ambien emperaure -40 o C o C Proecion caegory Connecion Plug-in 21.2 x 27.5 x 34.5 mm Weigh 35 g 10 14,2 Remarks Sandard coil is 50/60 Hz Deailed informaion and daashees are available on 26

25 Indusrial relays L-relays Ordering codes L2-relays Coil volage Type Aricle number 12 VDC L2-L-D VDC L2-L-D VDC L2-L-D VDC L2-L-D VDC L2-L-D VAC 50/60Hz L2-L-A VAC 50/60Hz L2-L-A VAC 50/60Hz L2-L-A VAC 50/60Hz L2-L-A VAC 50/60Hz L2-L-A Oher volage on reques Accessories Type CL-1 Name Relay reaining clip Mouning on Applicable for L2-relays Maerial Meal Weigh Aricle number Sockes Type VL-2 VL-2PCB Applicable for L2 L2 Conac raing AC1 12 A 12 A Terminals Screw PCB Mouning 35 mm rail Solder 66.6 x 25.9 x 30.9 mm 66.6 x 25.9 x 30.9 mm Weigh 37 g 5 g Aricle number

26 Indusrial relays I-relays I1 Inerface 6 A, 1 changeover conac Inerface relay, supplied wih 1 changeover conac. Sandard equipped wih back EMF diode (for DC-coils) and LED-indicaion. Various coil volages 1 changeover conac 6 A AgNi conacs (AgNi/Au 0.2 µm opional) Back EMF diode 35 mm rail mouning Connecion diagram 12 VDC, 24 VDC 12 +A A2 230 VAC 12 +A A2 24 VAC/DC Conac specificaions Conac maerial AgSnO 2 Number & configuraion 1 C/O Raed coninuous curren (ACI, IEC 60947) 6 A Raed load (capaciy) AC1 6 A / 250 VAC Raed load (capaciy) DC1 6 A / 24 VDC Max. inrush curren 15 A Max. swiching volage AC 230 V Max. swiching volage DC 125 V Min. swiched curren 100 ma Coil specificaions Nominal volage 12 VDC-24 VDC-24 VAC/DC-230 VAC-230 VAC/DC Power consumpion (DC/AC) W / VA VAC/DC A1 -A2 +A1 -A2 Technical daa Mechanical life cycles > 20 x 106 Pull-in ime DC/AC 6/7 ms Release ime DC/AC 8/15 ms Ambien emperaure -40 o C o C Proecion caegory IP20 80 x 93.8 x 6.2 mm Weigh 40 g Deailed informaion and daashees are available on 28

27 Indusrial relays I-relays Ordering codes I1-relays Coil volage Type Aricle number 12 VDC I1-L-D012R VDC I1-L-D024R VAC/DC I1-L-U024R VAC I1-L-A230R VAC/DC I1-L-U230R Oher volages on reques Accessories Type I-connec-20 Red I-connec-20 Black I-connec-20 Blue Name Inerconnecion srip Inerconnecion srip Inerconnecion srip Applicable for I1-relays I1-relays I1-relays Aricle number

28 Indusrial relays XT-relays XT-17M-161 Universal, 24 VAC/DC, 230 VAC 16 A, 1 changeover conac Universal relay wih 1 C/O conac and clear LED-saus indicaion. Suiable for 24 VAC/DC as well 230 VAC. 24 VAC/DC & 230 VAC 1 changeover conac 16 A AgSnO 2 conacs Clear LED-indicaion Buil-in diode Screw connecion Suiable for 35 mm rail mouning Connecion diagram A1 11 A2 A Conac specificaions Conac maerial AgSnO 2 Number & configuraion 1 C/O Raed coninuous curren (ACI, IEC 60947) 16 A Max. inrush curren 30 A / < 3 s Max. swiching volage 250 VAC / 24 VDC Max. breaking capaciy 4000 VA / AC1 / 384 W DC Supply and funcion Nominal volage (A1-A2) Nominal volage (A1-A3) Supply volage olerance 230 VAC (50/60 Hz) 24 VAC/DC (50/60 Hz) Un Technical daa Elecrical life 7 x 104 Ambien emperaure -20 o C o C Proecion caegory Connecion Screw 2.5 mm2 90 x 17.6 x 64 mm Weigh 54 g Deailed informaion and daashees are available on Ordering code XT-17M

29 Indusrial relays Insananeous XT-relays XT-17M-163 Universal, 24 VAC/DC, 230 VAC 8 A, 3 changeover conacs Universal relay wih 3 C/O conacs and clear LED-saus indicaion. Suiable for 24 VAC/DC as well 230 VAC. 24 VAC/DC & 230 VAC 3 changeover conac 8 A AgNi conacs Clear LED-indicaion Buil-in diode Screw connecion Suiable for 35 mm rail mouning Connecion diagram A A Conac specificaions Conac maerial Number & configuraion Raed coninuous curren (ACI, IEC 60947) Max. inrush curren Max. swiching volage Max. breaking capaciy AgNi 3 C/O 8 A 10 A / < 3 s 250 VAC / 24 VDC 2000 VA / AC1 / 384 W DC Supply and funcion Nominal volage (A1-A2) Nominal volage (A1-A3) Supply volage olerance 230 VAC (50/60 Hz) 24 VAC/DC (50/60 Hz) Un Technical daa Elecrical life 7 x 104 Ambien emperaure -20 o C o C Proecion caegory Connecion Screw 2.5 mm2 90 x 17.6 x 64 mm Weigh 52 g Deailed informaion and daashees are available on Ordering code XT-17M

30 Indusrial relays XT-relays XT-17M-316/24 Universal, 24 VAC/DC 16 A, 3 changeover conacs Universal relay wih 3 C/O conacs and clear LED-saus indicaion. Suiable for 24 VAC/DC. 24 VAC/DC 3 changeover conacs 16 A AgSnO 2 conacs Clear LED-indicaion Buil-in diode Screw connecion Suiable for 35 mm rail mouning Connecion diagram Conac specificaions A1 11 A Conac maerial AgSnO 2 Number & configuraion 3 C/O Raed coninuous curren (ACI, IEC 60947) 16 A Max. inrush curren 30 A / < 3 s Max. swiching volage 250 VAC / 24 VDC Max. breaking capaciy 4000 VA / AC1 / 384 W DC Supply and funcion Nominal volage (A1-A2) Supply volage olerance 24 VAC (50/60 Hz) Un Technical daa Elecrical life 7 x 104 Ambien emperaure -20 o C o C Proecion caegory Connecion Screw 2.5 mm2 90 x 17.6 x 64 mm Weigh 90 g Deailed informaion and daashees are available on Ordering code XT-17M-316/

31 Indusrial relays XT-relays XT-17M-316/230 Universal, 230 VAC 16 A, 3 changeover conacs Universal relay wih 3 C/O conacs and clear LED-saus indicaion. Suiable for 230 VAC. 230 VAC 3 changeover conac 16 A AgNi conacs Clear LED-indicaion Buil-in diode Screw connecion Suiable for 35 mm rail mouning Connecion diagram Conac specificaions A1 11 A Conac maerial AgSnO 2 Number & configuraion 3 C/O Raed coninuous curren (ACI, IEC 60947) 16 A Max. inrush curren 30 A / < 3 s Max. swiching volage 250 VAC / 24 VDC Max. breaking capaciy 4000 VA / AC1 / 384 W DC Supply and funcion Nominal volage (A1-A2) Supply volage olerance 230 VAC (50/60 Hz) Un Technical daa Elecrical life 1 x 104 Ambien emperaure -20 o C o C Proecion caegory Connecion Screw 2.5 mm2 90 x 17.6 x 64 mm Weigh 92 g Deailed informaion and daashees are available on Ordering code XT-17M-316/

32 Noes 34

33 Time relays XT-relays A ime relay is a relay ha swiches afer a ime-delay. All ime relays of Mors Smi have one or more unique characerisics o make hem suiable for numerous applicaions. Via he selecion guide an quick selecion can be made of he relay for an specific insallaion. The XT-relays of Mors Smi are equipped wih a clear LED indicaion and are easy o moun on 35 mm rail. For addiional specificaions and daashees visi 35

34 Selecor XT-relays Time relays Modular elecronic imer relays wih single, dual and mulifuncion models. For general purpose, indusrial applicaions, swiching of AC or low DC volages / resisive loads. All XT-relays are equipped wih LED-indicaion, easy o moun 35 mm rail connecion. Manuals For all XT-relays daashees and manuals are available wih addiional informaion abou connecions and program deails. Visi for more informaion. Relay selecion Type Supply volage Changeover onac(s) Coninuous curren Laching Delay-on Delay-off Delay-on and delay-off Delay-on via signalling conac Delay-on / delay off afer swich off supply Delay-on Sar/Dela Delay-off afer impulse off Impulse generaor Symmerical cycler saring wih delay Symmerical cycler saring wih impulse Asymmerical cycler saring wih delay Asymmerical cycler saring wih impulse Page XT-17M-L VAC/DC 2 16 A o 38 XT-17M-A VAC/DC 1 16 A o 39 XT-17M-B VAC/DC 1 16 A o 40 XT-17M-D VAC/DC 2 8 A o 41 XT-17M-2XA VAC/DC 2x 1 16 A o 42 XT-17M-S VAC/DC 2 16 A o 43 XT-17M-P VAC/DC 1 16 A o o 44 XT-17M-C VAC/DC 1 16 A o o o o o o o o 45 XT-17M-C VAC/DC 3 8 A o o o o o o o o 46 XT-17M-C1/ VAC/DC 1 8 A o o o o o 47 Digial Type Supply volage Changeover onac(s) Coninuous curren Memory locaions Twiligh sensor Day - week program Realime swiching Page XT-35M-DC VAC/DC 2 16 A 100 o o 48 XT-35M-DCL1 230 VAC 1 8 A 100 o o o 49 36

35 Funcions XT-relays Funcion descripion Laching relay Inpu volage mus be applied coninuously. The oupu conacs change sae wih every rigger swich S closure. When inpu volage is removed/dropped off, he relay conacs reurn o heir shelf sae. Delay-on When he inpu volage is applied, he iming delay begins. Relay conacs change sae afer ime delay is complee. When inpu volage is removed/dropped off, he relay conacs reurn o heir shelf sae. Delay-off When he inpu volage is removed/drops off, he iming delay begins. Relay conacs change sae afer ime delay is complee. When inpu volage is removed/dropped off, he relay conacs reurn o heir shelf sae. Delay-on (via signalling conac) Inpu volage mus be applied coninuously. When rigger swich S is closed, iming delay begins and conacs will swich afer his period. When inpu volage is removed/dropped off, he relay conacs reurn o heir shelf sae. Delay-off (via signalling conac) Inpu volage mus be applied coninuously. When rigger swich S is closed, he relay conacs change sae. When rigger swich S is opened, delay begins. When delay is complee, conacs reurn o heir shelf sae. When he rigger swich S is closed before ime delay is complee, hen ime isrese. When rigger swich S is opened, he delay begins again, he relay conacs remain in heir energized sae. When inpu volage is removed/dropped off, he relay conacs reurn o heir shelf sae. Delay-on / delay-off (afer swiching off supply) Inpu volage mus be applied coninuously. When he inpu volage is removed/droped off, he iming delay begins. Relay conacs change sae afer ime delay is complee. Delay-on (Sar/Dela) When he inpu volage is applied, he iming delay of T1 and T2 begin (separae iming possible). Relay conacs change sae afer ime delay is complee. When inpu volage is removed/dropped off, he relay conacs reurn o heir shelf sae. Cycle pause saring When inpu volage is applied, ime delay begins. When ime delay is complee, he relay conacs change sae for ime delay. This cycle will repea unil inpu volage is removed/droped off. Cycle pulse saring When inpu volage is applied, relay conacs change sae immediaely and adjused ime delay begins. When ime delay is complee, conacs reurn o heir shelf sae for ime delay. This cycle will repea unil inpu volage is removed/droped off. Pulse generaor Upon applicaion of inpu volage a single oupu pulse of 0.5 seconds is delivered o he relay afer he ime delay. The power mus be removed and re-applied o repea pulse. 37

36 Laching Insananeous XT-relays XT-17M-L Laching 16 A, 2 changeover conacs Single funcion laching relay wih signalling conac. Via he signalling conac (S) i is possible o conrol he relay remoely. Laching Adjusable imedelay 0.1 s...10 h Universal supply volage VAC/DC 2 change over conacs, 16 A Screw connecion LED indicaion Suiable for 35 mm rail mouning Connecion diagram A on/off A Funcion A1 - A2 On/Off B1 B1 B2 B Conac specificaions Conac maerial AgSnO 2 Number & configuraion 2 C/O Raed coninuous curren (ACI, IEC 60947) 16 A Inrush curren 30 A / < 3 s Max. swiching volage 24 VDC1 / 250 VAC1 Max. breaking capaciy 4000 VA / AC1 / 384 W DC Supply and funcion Nominal volage VAC/DC 50/60 Hz Supply volage olerance Un Funcion Laching Technical daa Elecrical life (AC1) 7 x 104 Ambien emperaure -20 o C o C Proecion caegory Connecion Screw 2.5 mm2 90 x 17.6 x 64 mm Weigh 89 g Aplicaion example Deailed informaion and daashees are available on Ordering code XT-17M-L

37 Insananeous Single funcion XT-relays XT-17M-A Delay-on 16 A, 1 changeover conac Single funcion delay-on ime relay wih signalling conac. Via he signalling conac (S) i is possible o conrol he relay remoely. Delay-on Adjusable ime delay 0.1 s...10 h (6 ranges) Universal supply volage VAC/DC 1 changeover conac 16 A Screw connecion LED indicaion Suiable for 35 mm rail mouning Connecion diagram A1 15 S A Conac specificaions Conac maerial AgSnO 2 Number & configuraion 1 C/O Raed coninuous curren (ACI, IEC 60947) 16 A Inrush curren 30 A / < 3 s Max. swiching volage 24 VDC1 / 250 VAC1 Max. breaking capaciy 4000 VA / AC1 / 384 W DC Timing diagram U S Supply and funcion Nominal volage VAC/DC 50/60 Hz Supply volage olerance Un Adjusable ime delay-on XT-17M-A s XT-17M-A s XT-17M-A s XT-17M-A min XT-17M-A min XT-17M-A h Technical daa Elecrical life 30 x 106 Ambien emperaure -20 o C o C Proecion caegory Connecion Screw 2.5 mm2 90 x 17.6 x 64 mm Weigh 62 g Aplicaion example A1 Un S A2 15 Deailed informaion and daashees are available on Ordering codes XT-17M-A s XT-17M-A s XT-17M-A s XT-17M-A min XT-17M-A min XT-17M-A h

38 Single funcion Insananeous XT-relays XT-17M-B Delay-off 16 A, 1 changeover conac Single funcion delay-off ime relay wih signalling conac. Via he signalling conac (S) i is possible o conrol he relay remoely. Delay-off Adjusable ime delay 0.1 s...10 h (6 ranges) Universal supply volage VAC/DC 1 changeover conac 16 A Screw connecion LED indicaion Suiable for 35 mm rail mouning Connecion diagram A1 15 S A Timing diagram U S Conac specificaions Conac maerial AgNi Number & configuraion 1 C/O Raed coninuous curren (ACI, IEC 60947) 16 A Inrush curren 30 A / < 3 s Max. swiching volage 24 VDC1 / 250 VAC1 Max. breaking capaciy 4000 VA / AC1 / 384 W DC Supply and funcion Nominal volage VAC/DC 50/60 Hz Supply volage olerance Un Adjusable ime delay-on XT-17M-B s XT-17M-B s XT-17M-B s XT-17M-B min XT-17M-b min XT-17M-B h Technical daa Elecrical life 7 x 104 Ambien emperaure -20 o C o C Proecion caegory Connecion Screw 2.5 mm2 90 x 17.6 x 64 mm Weigh 62 g Aplicaion example + A Un S A2 15 Deailed informaion and daashees are available on Ordering codes XT-17M-B s XT-17M-B s XT-17M-B s XT-17M-B min XT-17M-B min XT-17M-B h

39 Single funcion Insananeous XT-relays XT-17M-D Delay-on / delay-off (wihou auxiliary supply) 8 A, 2 changeover conacs Single funcion delay-on / delay-off ime relay ha can swich wih an adjusable ime delay wihou auxiliary supply. Delay-on / delay-off Adjusable ime delay 0.1 s...10 min Universal supply volage VAC/DC 2 changeover conacs 8 A Screw connecion LED indicaion Suiable for 35 mm rail mouning Connecion diagram A1 15 A Timing diagram U U Delay ON Delay OFF A: Delay off No auxiliary supply Min. acivaed ime 0.5 s Conac specificaions Conac maerial AgNi Number & configuraion 2 C/O Raed coninuous curren (ACI, IEC 60947) 8 A Inrush curren 10 A / < 3 s Max. swiching volage 24 VDC1 / 250 VAC1 Max. breaking capaciy 2000 VA / AC1 / 192 W DC Supply and funcion Nominal volage VAC/DC 50/60 Hz Supply volage olerance Un Adjusable ime delay 0.1 s...10 min Technical daa Elecrical life 7 x 104 Ambien emperaure -20 o C o C Proecion caegory Connecion Screw 2.5 mm2 90 x 17.6 x 64 mm Weigh 93 g Deailed informaion and daashees are available on Ordering code XT-17M-D

40 Single Insananeous funcion XT-relays XT-17M-2XA Delay-on 2x 16 A, 2x 1 changeover conac Single funcion delay-on ime relay equipped wih 2x 1 changeover conacs. For each conac a separae ime delay can be se as delay-on. Delay-on Adjusable ime delay 0.1 s...10 d Universal supply volage VAC/DC 2x 1 changeover conac 16 A Screw connecion LED indicaion Suiable for 35 mm rail mouning Connecion diagram U A A Timing diagram 1 2 Conac specificaions Conac maerial AgNi Number & configuraion 2 C/O Raed coninuous curren (ACI, IEC 60947) 16 A Inrush curren 30 A / < 3 s Max. swiching volage 24 VDC1 / 250 VAC1 Max. breaking capaciy 4000 VA / AC1 / 384 W DC Supply and funcion Nominal volage VAC/DC 50/60 Hz Supply volage olerance Un Adjusable ime delay-on T1 0.1 s...1 d Adjusable ime delay-on T2 0.1 s...1 d Technical daa Elecrical life 7 x 104 Ambien emperaure -20 o C o C Proecion caegory Connecion Screw 2.5 mm2 90 x 17.5 x 64 mm Weigh 88 g Deailed informaion and daashees are available on Ordering code XT-17M-2XA

41 Insananeous Single funcion XT-relays XT-17M-S Delay-on Sar / Dela 16 A, 2 changeover conacs Single funcion delay-on ime relay, suiable for sar/dela engines. Via he adjusable ime delay a sar/dela moor can be swich on safely. Delay-on Adjusable ime delay T1 0.1 s d Adjusable ime delay T s ( / Δ) Universal supply volage VAC/DC 2 changeover conacs 16 A Screw connecion LED indicaion Suiable for 35 mm rail mouning Connecion diagram A1 15 A Timing diagram U ,1 s days (sar) 0,1 s... 1 s (open posiion) Conac specificaions Conac maerial AgNi Number & configuraion 2 C/O Raed coninuous curren (ACI, IEC 60947) 16 A Inrush curren 30 A / < 3 s Max. swiching volage 24 VDC1 / 250 VAC1 Max. breaking capaciy 4000 VA / AC1 / 384 W DC Supply and funcion Nominal volage VAC/DC 50/60 Hz Supply volage olerance Un Adjusable ime delay T1 0.1 s d Adjusable ime delay T s Technical daa Elecrical life (AC1) 7 x 104 Ambien emperaure -20 o C o C Proecion caegory Connecion Screw 2.5 mm2 90 x 17.6 x 64 mm Weigh 84 g Aplicaion example Sar up of moor( - ) sar of a moor (Moor) ( ) ( ) auxiliary volage S1 S3 S2 A1 A2 L1 L L3 (moor) ( ) ( ) S1 S2 S3 Deailed informaion and daashees are available on Ordering code XT-17M-S

42 Single Insananeous funcion XT-relays XT-17M-P Asymmeric cycler 16 A, 1 changeover conac Single funcion pulse ime relay wih adjusable sar funcion, cycler sars wih impulse or wih pause. Cycler saring wih impulse or wih pause Adjusable ime delay 0.1 s d Universal supply volage VAC/DC 1 changeover conac 16 A Screw connecion LED indicaion Suiable for 35 mm rail mouning Connecion diagram A1 15 S A Timing diagrams U Сycler beginning wih pulse Conac specificaions Conac maerial Number & configuraion Raed coninuous curren (ACI, IEC 60947) Inrush curren Max. swiching volage Max. breaking capaciy Supply and funcion Nominal volage Supply volage olerance Adjusable funcion Adjusable ime delay Adjusable ime delay T2 AgNi 1 C/O 16 A 30 A / < 3 s 24 VDC1 / 250 VAC VA / AC1 / 384 W DC VAC/DC 50/60 Hz Un Impulse sar / pause sar 0.1s d 0.1s...1 s U S Сycler beginning wih pause 0.10,15 s days days 1 2 Technical daa Elecrical life 7 x 104 Ambien emperaure -20 o C o C Proecion caegory Connecion Screw 2.5 mm2 90 x 17.5 x 64 mm Weigh 65 g Deailed informaion and daashees are available on Ordering code XT-17M-P

43 Mulifuncion Insananeous XT-relays XT-17M-C1 Mulifuncion, 10 funcions 16 A, 1 changeover conac Mulifuncion ime relay equipped wih 10 funcions, adjusable ime delay and universal supply volage. A few funcions of he relay can be conrolled remoely via he signalling conac (S). 10 funcions Adjusable ime delay 0.1 s...10 d Universal supply volage VAC/DC 1 changeover conac 16 A Screw connecion LED indicaion Suiable for 35 mm rail mouning Connecion diagram A1 15 S A Timing diagrams Delay ON Afer energizaion Delay OFF Afer energizaion Recycler Saring OFF Recycler Saring ON Delay OFF, afer break of S inpu U U U U S Conac specificaions Conac maerial Number & configuraion Raed coninuous curren (ACI, IEC 60947) Inrush curren Max. swiching volage Max. breaking capaciy Supply and funcion Nominal volage Supply volage olerance Adjusable funcions Adjusable ime delay AgNi 1 C/O 16 A 30 A / < 3 s 24 VDC1 / 250 VAC VA / AC1 / 384 W DC VAC/DC 50/60 Hz Un Delay-on Delay-off Recycler saring on Recycler saring off Delay-on afer break of S conac Delay-off afer make of S conac Delay-off afer make of S conac Delay-on / off Laching Pulse generaor 0.1s...10 d Delay OFF, afer make of S inpu Delay OFF, afer make of S Delay ON and OFF S S S Technical daa Elecrical life 7 x 104 Ambien emperaure -20 o C o C Proecion caegory Connecion Screw 2.5 mm2 90 x 17.5 x 64 mm Weigh 64 g Laching Pulse generaor S U Applicaion example Load beween S-A2 in parallel possible wihou disurbing proper operaion of he relay. The load is energised for a period of ime when a buon is pressed A1 Ordering code XT-17M-C Un S A2 15 Deailed informaion and daashees are available on 45

44 Mulifuncion Insananeous XT-relays XT-17M-C3 Mulifuncion, 10 funcions 8 A, 3 changeover conacs Mulifuncion ime relay equipped wih 10 selecable funcions, adjusable ime delays and universal supply volage. A few funcions of he relay can be conrolled remoely via he signalling conac (S). 10 funcions Adjusable ime delay 0.1 s...10 d Universal supply volage VAC/DC 3 changeover conac 8 A Screw connecion LED indicaion Suiable for 35 mm rail mouning S Connecion diagram A1 15 A Timing diagrams Delay ON Afer energizaion Delay OFF Afer energizaion Recycler Saring OFF Recycler Saring ON Delay OFF, afer break of S inpu U U U U S Conac specificaions Conac maerial Number & configuraion Raed coninuous curren (ACI, IEC 60947) Inrush curren Max. swiching volage Max. breaking capaciy Supply and funcion Nominal volage Supply volage olerance Adjusable funcions Adjusable ime delay AgNi 3 C/O 8 A 10 A / < 3 s 24 VDC1 / 250 VAC VA / AC1 / 192 W DC VAC/DC 50/60 Hz Un Delay-on Delay-off Recycler saring on Recycler saring off Delay-on afer break of S conac Delay-off afer make of S conac Delay-off afer make of S conac Delay-on / off Laching Pulse generaor 0.1 s...10 d Delay OFF, afer make of S inpu Delay OFF, afer make of S Delay ON and OFF Laching Pulse generaor S S S S U Technical daa Elecrical life 7 x 104 Ambien emperaure -20 o C o C Proecion caegory Connecion Screw 2.5 mm2 90 x 17.6 x 64 mm Weigh 89 g Applicaion example Load beween S-A2 in parallel possible wihou disurbing proper operaion of he relay. The load is energised for a period of ime when a buon is pressed. Deailed informaion and daashees are available on Ordering code XT-17M-C

45 Mulifuncion Insananeous XT-relays XT-17M-C1/6 Mulifuncion, 6 funcions 8 A, 1 changeover conac Mulifuncion ime relay equipped wih 6 selecable funcions, adjusable ime delays and universal supply volage. A few funcions of he relay can be conrolled remoely via he signalling conac (S). 6 funcions Adjusable ime delay 0.1 s...10 h Universal supply volage VAC / 24 VDC 1 changeover conac 8 A Screw connecion LED indicaion Suiable for 35 mm rail mouning Connecion diagram A1 15 S A Timing diagrams Delay ON Afer energizaion Delay OFF Afer energizaion Recycler Saring ON Delay OFF, afer break of S inpu Delay ON and OFF Impulse relay wih delay U U U S S S < Conac specificaions Conac maerial Number & configuraion Raed coninuous curren (ACI, IEC 60947) Inrush curren Max. swiching volage Max. breaking capaciy Supply and funcion Nominal volage Supply volage olerance Adjusable funcions Adjusable ime delay Technical daa AgNi 3 C/O 8 A 10 A / < 3 s 24 VDC1 / 250 VAC VA / AC1 / 240 W DC VAC/DC 50/60 Hz / 24 VDC Un Delay-on Delay-off Recycler saring on Delay-on afer break of S conac Delay-on / off Impulse relay wih delay 0.1 s...10 h Elecrical life 10 x 104 Ambien emperaure -20 o C o C Proecion caegory Connecion Screw 2.5 mm2 90 x 17.6 x 64 mm Weigh 69 g Deailed informaion and daashees are available on Ordering code XT-17M-C

46 Digial Insananeous XT-relays XT-35M-DC2 Digial, programmable 16 A, 2 changeover conacs Digial, programmable ime relay wih 100 memory locaions. Equipped wih a sealable cover, universal supply volage and easy programming. Day / week programming 100 memory locaions Auomaic summer/winer ime seing Supply volage VAC/DC 2 changeover conac 16 A Screw connecion Suiable for 35 mm rail mouning Connecion diagram Conac specificaions A1 15 A Conac maerial AgSnO 2 Number & configuraion 2 C/O Raed coninuous curren (ACI, IEC 60947) 16 A Inrush curren 30 A / < 3 s Max. swiching volage 24 VDC1 / 250 VAC1 Max. breaking capaciy 4000 VA / AC1 / 384 W DC Supply and funcion Nominal volage VAC/DC 50/60 Hz Supply volage olerance Un Memory 100 locaions Technical daa Elecrical life 7 x 104 Ambien emperaure -20 o C o C Proecion caegory Connecion Screw 2.5 mm2 90 x 35.6 x 64 mm Weigh 143 g Deailed informaion and daashees are available on Ordering code XT-35M-DC

47 Digial XT-relays XT-35M-DCL1 Digial, programmable, wih wiligh sensor 8 A, 1 changeover conac Digial, programmable ime relay wih 100 memory locaions. Equipped wih a sealable cover, 230 VAC supply volage and easy programming. Day / week programming 100 memory locaions Auomaic summer/winer ime seing Supply volage 230 VAC 1 changeover conac 8 A Screw connecion Suiable for 35 mm rail mouning Connecion diagram A1 15 A Conac specificaions Conac maerial AgSnO 2 Number & configuraion 1 C/O Raed coninuous curren (ACI, IEC 60947) 8 A Inrush curren 10 A / < 3 s Max. swiching volage 24 VDC1 / 250 VAC1 Max. breaking capaciy 2500 VA / AC1 / 240 W DC Supply and funcion Nominal volage Supply volage olerance Memory 230 VAC 50/60 Hz Un 100 locaions Technical daa Elecrical life 1 x 104 Ambien emperaure -20 o C o C Proecion caegory Connecion Screw 2.5 mm2 90 x 35.6 x 64 mm Weigh Relay: 110 g Sensor : 20g Deailed informaion and daashees are available on Ordering code XT-35M-DCL

48 50

49 Measuring and monioring relay The XM-relays cover a wide range of models wih LED indicaion and 35 mm rail mouning. Volage monoring models (1-phase, 3-phase) Phase failure, sequence and assymery models Curren monioring models (AC, DC) Wih a conac raing up o 16 A and an S conac o exernal conrol he relay make hese relays suiable for various indusrial applicaions. 51

50 Selecor XM-relays Measuring and monioring relays Measuring and monioring relays are suiable for various applicaions. The adjusable ime delay makes hese relays suiable for specific requiremens for an applicaion and makes he relay insensiive for shor volage peaks and failures. There are 3 groups: 1-phase measure/monioring relays 3-phase measure/monioring relays Curren measure/monioring relays All XM-relays are equipped wih LED indicaion, easy o moun 35 mm rail connecion. Manuals For all XM-relays daashees and manuals are available wih addiional informaion abou connecions and program deails. Visi for more informaion. Relay selecion Type Measuring range Changeover onacs Curren Supply volage Undercurren Overcurren Phase fail Phase sequence Phase asymery Curren page XM-17M-VA VAC 1 16 A - o o 54 XM-17M-VD VDC 1 16 A - o o 55 XM-17M-2xVA VAC 2 16 A - o o 56 XM-52M-VA VAC 2 16 A 230 VAC o o 57 XM-17M-M400L 3x 400 VAC 1 16 A - o o o o 58 XM-17M-M400LN 3x 400 VAC 1 16 A - o o o o 59 XM-52M-M400L 3x 400 VAC 2 16 A 230 VAC o o o o o 60 XM-52M-M400LN 3x 400 VAC 2 16 A 230 VAC o o o o o 61 XM-17M-VA400LN 3x 400 VAC 1 8 A - o o o o o 62 XM-17M-IA25U A AC 1 8 A - o 63 52

51 Feaures XM-relays Funcie beschrijving Under volage proecion Adjusable undervolage. If he measured volage drops below he se value he relay will rip. A adjusable ime delay prevens he relay from ripping from shor volage drops and failures. Over volage proecion Adjusable overvolage. If he measured volage exceeds he se value he relay will rip. A adjusable ime delay prevens he relay from ripping from shor volage peaks and failures. Phase proecion Proecion agains phase failure. If one of he phases or N drops he relay will rip. Phase sequence proecion Proecs he phase sequence. If he phase sequence / roaion changes he relay will rip. Phase assymery In case he se asymmery is exceeded, oupu relay breaks. Curren proecion If he measured curren exceeds he se value he relay will rip. 53

52 Measuring XM-relays and monioring Measuring Insananeous XM-relays and monioring XM-17M-VA230 Volage monioring relay, VAC 1-phase, 16 A, 1 changeover conac Volage monioring relay, suiable for 1 phase proecion agains under- & overvolage. Under- & overvolage proecion Measuring range VAC Moniored volage serves as supply volage 1 C/O conac 16 A Adjusable ime delay s LED indicaion Suiable for 35 mm rail mouning Connecion diagram A1 15 A Funcion diagram Hyseresis Hyseresis Conac specificaions Conac maerial Number & configuraion Raed coninuous curren Max. inrush curren Max. swiching volage Max. breaking capaciy Supply and measuring range Nominal volage Adjusable overvolage (Umax) Adjusable undervolage (Umin) Adjusable ime delay AgNi 1 C/O 16 A 30 A / < 3 s 24 VDC / 250 VAC 4000 VA / AC1 / 384 W DC VAC 50 Hz VAC % van Umax s > Technical daa Mechanical life cycles 30 x 106 Seings accuracy (mechanical) 5 % Time delay Adjusable s Ambien emperaure -20 o C o C Proecion caegory Connecion Screw 2.5 mm2 90 x 17.6 x 64 mm Weigh 61 g Deailed informaion and daashees are available on Ordering code XM-17M-VA

53 Measuring Insananeous and monioring XM-relays XM-17M-VD24 Volage monioring relay, VDC 1-phase, 16 A, 1 changeover conac Volage monioring relay, suiable for 1 phase proecion agains under- &overvolage. Under & overvolage proecion Measuring range VDC Moniored volage serves as supply volage 1 C/O conac 16 A Adjusable ime delay s LED indicaion Suiable for 35 mm rail mouning Connecion diagram A1 15 A Funcion diagram Hyseresis Hyseresis Conac specificaions Conac maerial Number & configuraion Raed coninuous curren Max. inrush curren Max. swiching volage Max. breaking capaciy Supply and measuring range Nominal volage Adjusable overvolage (Umax) Adjusable undervolage (Umin) Adjusable ime delay AgNi 1 C/O 16 A 30 A / < 3 s 24 VDC / 250 VAC 4000 VA / AC1 / 384 W DC VDC VDC % van Umax s Technical daa Mechanical life cycles 30 x 106 Seings accuracy (mechanical) 5 % Ambien emperaure -20 o C o C Proecion caegory Connecion Screw 2.5 mm2 90 x 17.6 x 64 mm Weigh 73 g Deailed informaion and daashees are available on Ordering code XM-17M-VD

54 Measuring and monioring XM-relays XM-17M-2XVA230 Volage monioring relay, VAC 1-phase, 16 A, 2 changeover conacs Volage monioring relay, suiable for 1 phase proecion agains underand overvolage. Supplied wih 2 C/O conacs which swich separaely. 1 C/O conac for a overvolage, 1 C/O conac for a undervolage Under- & overvolage proecion Measuring range VAC Moniored volage serves as supply volage 1 C/O conac overvolage 16 A 1 C/O conac undervolage 16 A Adjusable ime delay s LED indicaion Suiable for 35mm rail mouning Connecion diagram A A Funcion diagram Conac specificaions Conac maerial Number & configuraion Raed coninuous curren (AC1, IEC 60947) Max. inrush curren Max. swiching volage Breaking capaciy AgNi 1 C/O undervolage, 1 C/O overvolage 16 A 30 A / < 3 s 24 VDC / 250 VAC 4000 VA / AC1 / 384 W DC Hyseresis Hyseresis Supply and measuring range Nominal volage Adjusable overvolage (Umax) Adjusable undervolage (Umin) Adjusable ime delay VAC 50 Hz VAC % van Umax s > Technical daa Mechanical life cycles 30 x 106 Seings accuracy (mechanical) 5 % Ambien emperaure -20 o C o C Proecion caegory Connecion Screw 2.5 mm2 90 x 17.6 x 64 mm Weigh 85 g Deailed informaion and daashees are available on Ordering code XT-17M-2XVA

55 Measuring and monioring XM-relays XM-52M-VA500 Volage monioring relay, VAC 1-phase, 16 A, 2 changeover conacs Volage monioring relay, suiable for 1 phase proecion agains underand overvolage wih an measuring range of VAC. Supplied wih 2 C/O conac which swich parallel or separaely. Connecion diagram A1 C 15 A2 B1 B2 B Funcion diagram Under- & overvolage proecion Measuring range VAC Window funcion Supply volage 230 VAC 2 C/O conacs 16 A Adjusable ime delay undervolage s Adjusable ime delay overvolage s LED indicaion Suiable for 35mm rail mouning Conac specificaions Conac maerial AgNi Number & configuraion 2 C/O Raed coninuous curren (AC1, IEC 60947) 16 A Max. inrush curren 30 A / (< 3 s) Max. swiching volage 24 VDC / 250 VAC Breaking capaciy 4000 VA / AC1 / 384 W DC Un Umax Uin Umin RESET LED >U LED <U LED Hyseresis Hyseresis MEMORY-ON (DIP2) Hyseresis Supply and measuring range Supply volage Nominal volage Adjusable overvolage (Umax) Adjusable undervolage (Umin) Adjusable ime delay (Umax) Adjusable ime delay (Umin) 230 VAC VAC (in 3 ranges) % of chosen range % van Umax s s Technical daa Mechanical life cycles 30 x 106 Hysersis 5 % / 10 % Ambien emperaure -20 o C o C Proecion caegory Connecion Screw 2.5 mm2 90 x 52 x 64 mm Weigh 250 g Deailed informaion and daashees are available on Ordering code XM-52M-VA

56 Measuring and monioring XM-relays XM-17M-M400L Phase, phase sequence and volage monioring 3-phase, 8 A, 1 changeover conac Phase fail, phase sequence and volage monioring relay, suiable for 3-phase sysems. Prese under- and overvolage (U min 75 % U n, U max 125 % U n ). Supplied wih 1 C/O conac and muliple LED indicaion. Connecion diagram L1 15 L2 L Funcion diagram Umax Hyseresis Umin UOFF L1 Umax Umin UOFF L2 Umax Umin U OFF L green LED red LED Phase proecion Phase sequence proecion Under- & overvolage proecion Measuring range 400 VAC Moniored volage serves as supply volage 1 C/O conac 8 A Adjusable ime delay s LED indicaion Suiable for 35mm rail mouning Conac specificaions Conac maerial Number & configuraion Raed coninuous curren Max. inrush curren Max. swiching volage Breaking capaciy Supply and measuring range Phase proecion Measuring range Overvolage (Umax) Undervolage (Umin) Time delay T1 Adjusable ime delay T2 Technical daa AgNi 1 C/O 8 A 10 A 24 VDC / 250 VAC 2500 VA / AC1 / 240 W DC L1, L2, L3 400 VAC 75 % Un 125 % Un 500 ms s Mechanical life cycles 10 x 106 Seings accuracy (mechanical) 5 % Ambien emperaure -20 o C o C Proecion caegory Connecion Screw 2.5 mm2 90 x 17.6 x 64 mm Weigh 67 g Deailed informaion and daashees are available on Ordering code XT-17M-M400L

57 Measuring and monioring XM-relays XM-17M-M400LN Phase, phase sequence and volage monioring 3-phase, 8 A, 1 changeover conac Phase fail, phase sequence and volage monioring relay, suiable for 3-phase +N sysems. Prese under- and overvolage (U min 75 % Un, U max 125 % U n ). Supplied wih 1 C/O conac and muliple LED indicaion. Connecion diagram L1 N 15 L2 L Funcion diagram Phase proecion Phase sequence proecion Under- & overvolage proecion Measuring range 400 VAC Moniored volage serves as supply volage 1 C/O conac 8 A Adjusable ime delay s LED indicaion Suiable for 35mm rail mouning Conac specificaions Conac maerial Number & configuraion Raed coninuous curren Max. inrush curren Max. swiching volage Breaking capaciy AgNi 1 C/O 8 A 10 A 24 VDC / 250 VAC 2500 VA / AC1 / 240 W DC Umax Umin UOFF L1 Umax Umin UOFF L2 Umax Umin U OFF L green LED Hyseresis Supply and measuring range Phase proecion Measuring range Measuring range Overvolage (Umax) Undervolage (Umin) Time delay T1 Adjusable ime delay T2 L1, L2, L3 L1, N 400 VAC 75 % Un 125 % Un 500 ms s red LED Technical daa Mechanical life cycles 10 x 106 Seings accuracy (mechanical) 5 % Ambien emperaure -20 o C o C Proecion caegory Connecion Screw 2.5 mm2 90 x 17.6 x 64 mm Weigh 66 g Deailed informaion and daashees are available on Ordering code XT-17M-M400LN

58 Measuring and monioring XM-relays XM-52M-M400L Phase, phase sequence, phase asymery and volage monioring 3-phase, 16 A, 2 changeover conacs Phase fail, phase sequence, phase asymmery and volage monioring relay, suiable for 3-phase sysems. Supplied wih 2 C/O conacs and muliple LED indicaion. Connecion diagram L1 L2 L3 L1 Umax Umin L2 Umax Umin L3 Umax Umin LED L1 L2 L3 RESET (25-28) LED RESET % L1 0% 100% L2 0% 100% L3 0% Overvolage - undervolage Hyseresis 100% 0% RESET (25-28) LED Phase sequence Asymmery - phase failure Hyseresis A L3 L2 1 1 Hyseresis 15 A Funcion diagrams L2 L MEMORY - ON (DIP-2) L3 L MEMORY - ON (DIP-2) 1 L2 L3 1 MEMORY ON (DIP-2) Phase proecion Phase sequence proecion Phase asymmery proecion Under & overvolage proecion Measuring range 3x 400 VAC Supply volage 230 VAC 2 C/O conacs 16 A Adjusable ime delay s LED indicaion Suiable for 35mm rail mouning Conac specificaions Conac maerial Number & configuraion Raed coninuous curren (AC1, IEC 60947) Max. inrush curren Max. swiching volage Breaking capaciy Supply and measuring range AgNi 2 C/O 16 A 30 A / < 3 s 24 VDC / 250 VAC 4000 VA / AC1 / 384 W DC Phase proecion L1, L2, L3 Supply volage 230 VAC 50/60 Hz (A1 & A2) Measuring range 400 VAC Adjusable overvolage (Umax) V Adjusable undervolage (Umin) % of U max Time delay T1 Max 200 ms Adjusable ime delay T s Technical daa Mechanical life cycles 30 x 106 Accuracy 5 % / 10 % Ambien emperaure -20 o C o C Proecion caegory Connecion Screw 2.5 mm2 90 x 52 x 64 mm Weigh 239 g Deailed informaion and daashees are available on Ordering code XM-52M-M400L

59 Measuring and monioring XM-relays XM-52M-M400LN Phase, phase sequence, phase asymery and volage monioring 3-phase + N, 16 A, 2 changeover conacs Phase fail, phase sequence, phase asymmery and volage monioring relay, suiable for 3-phase +N sysems. Supplied wih 2 C/O conacs and muliple LED indicaion. Connecion diagram L1 L2 L3 N Overvolage - undervolage Hyseresis L1 Umax Umin A1 Hyseresis 15 A Funcion diagrams Phase proecion Phase sequence proecion Phase asymmery proecion Under & overvolage proecion Measuring range 3x 400 VAC Supply volage 230 VAC 2 C/O conacs 16 A Adjusable ime delay s LED indicaion Suiable for 35mm rail mouning Conac specificaions Conac maerial Number & configuraion Raed coninuous curren Max. inrush curren Max. swiching volage Breaking capaciy AgNi 2 C/O 16 A 30 A / < 3 s 24 VDC / 250 VAC 4000 VA / AC1 / 384 W DC L2 Umax Umin L3 Umax Umin LED L1 L2 RESET Phase sequence 2 L3 1 L2 MEMORY - ON (DIP-2) L3 1 L2 Supply and measuring range Phase proecion L1, L2, L3, N Supply volage 230 VAC 50/60 Hz (A1 & A2) Measuring range 400 VAC / 230 VAC Adjusable overvolage (Umax) V Adjusable undervolage (Umin) % of U max Time delay T1 Max 200 ms Adjusable ime delay T s L3 RESET (25-28) LED Asymmery - phase failure 100% L1 0% 100% L2 0% 100% L3 0% 100% L2 1 L3 1 L2 1 MEMORY - ON (DIP-2) L3 1 Technical daa Mechanical life cycles 30 x 106 Accuracy 5 % / 10 % Ambien emperaure -20 o C o C Proecion caegory Connecion Screw 2.5 mm2 90 x 52 x 64 mm Weigh 239 g 0% RESET (25-28) Hyseresis Deailed informaion and daashees are available on LED MEMORY ON (DIP-2) Ordering code XM-52M-M400LN

60 Measuring and monioring XM-relays XM-17M-VA400LN Phase, phase sequence and volage monioring 3-phase +N, 8 A, 1 changeover conac Phase fail, phase sequenceand volage monioring relay, suiable for 3-phase +N sysems. Supplied wih 1 C/O conacs and muliple LED indicaion. Connecion diagram L1 N 15 Phase +N proecion Phase sequence proecion Under & overvolage proecion Measuring range 400 VAC / 230 VAC Moniored volage serves as supply volage 1 C/O conac 8 A Adjusable ime delay s LED indicaion Suiable for 35 mm rail mouning L2 L Funcion diagram Umax Hyseresis Umin UOFF L1 Umax Umin UOFF L2 Umax Umin U OFF L green LED red LED Conac specificaions Conac maerial AgNi Number & configuraion 1 C/O Raed coninuous curren 8 A Max. inrush curren 10 A Max. swiching volage 24 VDC / 250 VAC Breaking capaciy 2500 VA / AC1 / 240 W DC Supply and measuring range Phase proecion L1, L2, L3 Supplyconac L1, N Measuring range 400 VAC / 230 VAC Adjusable overvolage (Umax) % Un Adjusable undervolage (Umin) % Un Time delay T1 Max 500 ms Adjusable ime delay T s Technical daa Mechanical life cycles 10 x 106 Hyseresis 5 % Ambien emperaure -20 o C o C Proecion caegory Connecion Screw 2.5 mm2 90 x 17.6 x 64 mm Weigh 67 g Deailed informaion and daashees are available on Ordering code XT-17M-VA400LN

61 Measuring and monioring XM-relays XM-17M-IA25U Curren monioring 1-phase, 8 A, 1 changeover conac Curren monioring relay, suiable for 1-phase sysems. Range A, via an opional curren ransformer exendable o 600 A. Supplied wih 1 changeover conac and LED indicaion. Curren monioring Measuring range A AC Supply volage 230 VAC 1 change over conac 8 A Max. conducor size 5.8 mm LED indicaion Suiable for 35mm rail mouning Connecion diagram A1 15 <I A Funcion diagram Conac specificaions Conac maerial Number & configuraion Raed coninuous curren Breaking capaciy AgNi 1 C/O 8 A 2500 VA / AC1 / 240 W DC Supply and measuring range Supply Measuring range Max. conducor size 230 VAC 50/60 Hz A, exendable o 600 A 5.8 mm Technical daa Mechanical life cycles 10 x 106 Hyseresis 5 % Ambien emperaure -20 o C o C Proecion caegory Connecion Screw 2.5 mm2 90 x 17.6 x 64 mm Weigh 64 g Deailed informaion and daashees are available on Ordering code XM-17M-IA25U

62 Curren ransformer XM-relays XM-CT Curren ransformer 1-phase, 50 A A Curren ransformer for XM-17M-IA relays (only), o exend he maximum conrolled curren up o 600 A. Muliple ranges Suiable for 35 mm rail mouning Suiable for busbar and cable Insallable on panel or rail mouning Busbar o max. dimension 40 x 10 mm XM-CT50 XM-CT100 XM-CT150 XM-CT200 Max. wire diameer 22 mm 22 mm 22 mm 23 mm Max busbar profile x 10 Primary curren 50 A 100 A 150 A 200 A Accuracy class Accuracy class Accuracy class XM-CT250 XM-CT300 XM-CT400 XM-CT600 Max. wire diameer 23 mm 35 mm 35 mm 35 mm XM-CT300 XM-CT400 XM-CT Max bus-bar profile 30 x x x x 10 Primary curren 250 A 300 A 400 A 600 A Accuracy class Accuracy class Accuracy class XM-CT50 XM-CT100 XM-CT150 XM-CT200 XM-CT250 Technical daa Cable size solid conducor Max 6 mm 2 Cable size wire Max 4 mm 2 Oupu curren A Frequency 50/60 Hz Consan overload capaciy 1.2 x ln Ambien emperaure -20 o C o C Deailed informaion and daashees are available on Ordering codes XM-CT50 - XM-CT100 - XM-CT150 - XM-CT200 - XM-CT250 - XM-CT300 - XM-CT400 - XM-CT600-64

63 Mors Smi brochures are also available on our websie: Heavy duy relays General purpose relays Acus relays Surge proecion devices Indusrial sensors Nieaf-Smi brochures are also available on our websie: Insrumens 1 Insrumens 2 65

49.8. Control Relays and Timers. Contents. Product Selection Guide. Timing Relays

49.8. Control Relays and Timers. Contents. Product Selection Guide. Timing Relays Conrol Relays and Timers.8 Produc Selecion Guide Noes Applies o TRN model only. Applies o TRF model only. The E5-248 is baery powered and has hree programmable rigger funcions. This produc may perform

More information

Electronic timer CT-MVS.12 Multifunctional with 1 c/o contact Data sheet

Electronic timer CT-MVS.12 Multifunctional with 1 c/o contact Data sheet Feaures Raed conrol supply volage 24-48 V DC, 24-240 V AC Mulifuncion imer wih 10 iming funcions: ON-delay, OFF-delay wih auxiliary volage, Impulse-ON, Impulse-OFF wih auxiliary volage, Symmerical ON-

More information

Solid-state Multi-functional Timer

Solid-state Multi-functional Timer Solid-sae Muli-funcional Timer Eigh operaing modes (H3DE-M) and four operaing modes (H3DE-S) cover a wide range of applicaions. Programmable conac enables he building of a self-holding relay circui (-

More information

Time Control Technique

Time Control Technique Time Conrol Technique muliimer Mulifuncion Relay MK 785N/2 23928 Your Advanages Up o 1 funcions in one uni Simplified sorage Increased flexibiliy Quick seing of long ime values Opions wih Pluggable Terminal

More information

Time Control Technique

Time Control Technique Time Conrol Technique MULTITIMER Mulifuncion Relay MK 785N/2 23928 Your Advanages Up o 1 funcions in one uni Simplified sorage Increased flexibiliy Quick seing of long ime values Circui Diagrams B1 22

More information

Solid-state Timer H3CT

Solid-state Timer H3CT Solid-sae Timer H3CT DIN 48 x 48-mm Sandard Size Analog Timer Wide ime range (for 4 series of models); 0.1 s o 30 hrs. Wih H3CT-8H models, he oupu ype can be swiched beween ime limi DPDT and ime limi SPDT

More information

Monitoring Technique. VARIMETER Current relay BA 9053, MK 9053N

Monitoring Technique. VARIMETER Current relay BA 9053, MK 9053N Monioring Technique VARIMETER Curren relay, MK 9053N 0221540 Your Advanages Prevenive mainenance For beer produciviy Quicker faul locaing Precise and reliable MK 9053N Opions wih Pluggable Terminal Blocks

More information

Retro-reflective photoelectric sensors with polarization filter. Dimensioned drawing

Retro-reflective photoelectric sensors with polarization filter. Dimensioned drawing Rero-reflecive phooelecric sensors wih polarizaion filer Dimensioned drawing en 10-2011/04 50105364 1 khz 0 5m We reserve he righ o make changes DS_PRK3B_Sandard_EL_en.fm 10-30 V DC A 2 LS Polarized rero-reflecive

More information

Electronic step-on step-off relays SR-2

Electronic step-on step-off relays SR-2 Elecronic sep-on sep-off relays - 7 7 7-0min z A 0Va / WI MADE BY COMAT 0 z A 0Va -K / WI MADE BY COMAT 0 Elecronic sep-on sep-off relays ype - wih he following characerisics: Plug in sep-on sep-off relay

More information

Monitoring Technique. VARIMETER Current Relay BA 9053, MK 9053N

Monitoring Technique. VARIMETER Current Relay BA 9053, MK 9053N Monioring Technique VARIMETER Curren Relay, MK 9053N 0221540 Your Advanages Prevenive mainenance For beer produciviy Quicker faul locaing Precise and reliable Circui Diagrams A1 i A2 k A1 11 12 14 22 A1

More information

Universal UF3-24VDC N. Order code U F 3 24 V DC N Type of relay Model F Plug in type for socket, international 8-pole socket or 11pole socket resp.

Universal UF3-24VDC N. Order code U F 3 24 V DC N Type of relay Model F Plug in type for socket, international 8-pole socket or 11pole socket resp. F3-24VDC N niversal Relay niversal F Relay niversal F2/F3 Sandard ype / Twin cacs for high co nac making reliabiliy Wih LED and proeci diode reques niversal F3-24VDC N Order Code Order code F 3 24 V DC

More information

H3CR. Multifunctional Timer Twin Timer Star-delta Timer Power OFF-delay Timer H3CR-A H3CR-AS H3CR-AP H3CR-A8 H3CR-A8S H3CR-A8E H3CR-G.

H3CR. Multifunctional Timer Twin Timer Star-delta Timer Power OFF-delay Timer H3CR-A H3CR-AS H3CR-AP H3CR-A8 H3CR-A8S H3CR-A8E H3CR-G. Solid-sae Timer H3CR Please read and undersand his caalog before purchasing he producs. Please consul your OMR represenaive if you have any quesions or commens. Refer o Warrany and Applicaion Consideraions

More information

Retro-reflective photoelectric sensors with polarization filter. Dimensioned drawing

Retro-reflective photoelectric sensors with polarization filter. Dimensioned drawing Rero-reflecive phooelecric sensors wih polarizaion filer Dimensioned drawing en 10-2011/04 50105364 1 khz 0 5m We reserve he righ o make changes DS_PRK3B_Sandard_EL_en.fm 10-30 V DC A 2 LS Polarized rero-reflecive

More information

100% electricity. Modular time relays TM series

100% electricity. Modular time relays TM series 100% elecriciy Modular ime relays TM series Modular ime relays crew fixing faciliy arge cable enries OVATO Elecric exends he range of elecronic ime relays wih new modular models of he TM series, line.

More information

Retro-reflective photoelectric sensors with polarization filter for bottles. Dimensioned drawing

Retro-reflective photoelectric sensors with polarization filter for bottles. Dimensioned drawing Rero-reflecive phooelecric sensors wih polarizaion filer for boles Dimensioned drawing en 05-2013/08 50103461 1 khz 0 3.5m 10-30 V DC We reserve he righ o make changes DS_PRK3B42_en_50103461.fm Polarized

More information

Zelio Plug-In Relays. RPM power range. Catalog

Zelio Plug-In Relays. RPM power range. Catalog Zelio Plug-In Relays RPM power range Caalog 0 Conens Zelio Plug-In Relays bbinroducion.... bbspecificaions.................................................... 6 bbreferences... bbdimensions.... 0 bbwiring

More information

Contents DILET, ETR timing relay

Contents DILET, ETR timing relay ETR iming relay There s a cerain energy a Eaon. I s he power of uniing some of he world s mos respeced names o build a brand you can rus o mee your every power managemen need. The energy creaed suppors

More information

The ramp is normally enabled but can be selectively disabled by suitable wiring to an external switch.

The ramp is normally enabled but can be selectively disabled by suitable wiring to an external switch. Vickers Amplifier Cards Power Amplifiers for Proporional Valves EEA-PAM-56*-A-14 Design EEA-PAM-561-A-14 for use wih valve ypes: KDG5V-5, * and KDG5V-7, 1* series EEA-PAM-568-A-14 for use wih valve ypes:

More information

Dimensions. Model Number. Electrical connection emitter. Features. Electrical connection receiver. Product information. Indicators/operating means

Dimensions. Model Number. Electrical connection emitter. Features. Electrical connection receiver. Product information. Indicators/operating means OBE-R-SE Dimensions.8.8 ø..75 7.5 6. 5 6.7 4.9 4. 5.9 ø.6 Model Number OBE-R-SE Elecrical connecion emier Thru-beam sensor wih m fixed cable Feaures 45 cable oule for maximum mouning freedom under exremely

More information

Solid-State Time Relays

Solid-State Time Relays Solid-Sae Time Relays 3RP10 and 3RP15 SIRIUS 3R Overview Solid-Sae Time Relays SIRIUS 3RP10 ime relay, assembly widh 45 mm LED o indicae ime relay energized (lef) Accessories Se of coding plugs for seing

More information

ENDA ETM442 DIGITAL TIMER

ENDA ETM442 DIGITAL TIMER english Read his documen carefully before using his device. The guaranee will be expired by damaging of he device if you don' aend o he direcions in he user manual. Also we don' accep any compensaions

More information

MODULAR TIME RELAYS PLUG-IN AND FLUSH-MOUNT TIME

MODULAR TIME RELAYS PLUG-IN AND FLUSH-MOUNT TIME Page -2 MOULR TM RLY uiable for consumer swichboards elecable ime ranges on fron:. second - days L indicaion Mouning on mm N rail crew erminals. Page - PLU-N N LU-MOUNT TM RLY, XMM lush and inernal panel

More information

Dimensions. Transmitter Receiver ø2.6. Electrical connection. Transmitter +UB 0 V. Emitter selection. = Light on = Dark on

Dimensions. Transmitter Receiver ø2.6. Electrical connection. Transmitter +UB 0 V. Emitter selection. = Light on = Dark on OBE-R-SE Dimensions Transmier.. 7.5 9..5.8 4.9 4 5 M 8.9 7.5 9..5.8 4 5 M 8.9 ø.6 ø.6 Model Number OBE-R-SE Thru-beam sensor wih m fixed cable Elecrical connecion Transmier Feaures BN +UB WH IN Ulra-small

More information

Dimensions. Transmitter Receiver ø2.6. Electrical connection. Transmitter +UB 0 V. Emitter selection. = Light on = Dark on

Dimensions. Transmitter Receiver ø2.6. Electrical connection. Transmitter +UB 0 V. Emitter selection. = Light on = Dark on OBE-R-SE Dimensions Transmier.. 7.5 9..5.8 4.9 4 5 M 8.9 7.5 9..5.8 4 5 M 8.9 ø.6 ø.6 Model Number OBE-R-SE Thru-beam sensor wih m fixed cable Elecrical connecion Transmier Feaures BN +UB WH IN Ulra-small

More information

$ 12 $ 11. Terminal Block Relays (cont d) Interface PCB Relays with Socket. Why customers choose FactoryMation over competitors

$ 12 $ 11. Terminal Block Relays (cont d) Interface PCB Relays with Socket. Why customers choose FactoryMation over competitors 92 REAY www.facorymaion.com/relays Terminal Block Relays (con d) $ 12 V D E Feaures: Changeover relay, raed load 6A/230V(ACI) lim DI-rail moun socke wih buil-in ED posiion indicaor Descripion plae Opional

More information

Retro-reflective photoelectric sensor for foils. Dimensioned drawing

Retro-reflective photoelectric sensor for foils. Dimensioned drawing Specificaions and descripion RKR 55 Rero-reflecive phooelecric sensor for foils Dimensioned drawing en 06-2012/11 50106859-01 1 khz 0 1.8m 10-30 V DC We reserve he righ o make changes DS_RKR55642_en_50106859-01.fm

More information

Retro-reflective photoelectric sensor with polarization filter for bottles. Dimensioned drawing

Retro-reflective photoelectric sensor with polarization filter for bottles. Dimensioned drawing Specificaions and descripion PRK 55 Rero-reflecive phooelecric sensor wih polarizaion filer for boles Dimensioned drawing en 05-2012/11 50112987-01 1 khz 0 3.5m 10-30 V DC We reserve he righ o make changes

More information

Retro-reflective photoelectric sensor for foils. Dimensioned drawing

Retro-reflective photoelectric sensor for foils. Dimensioned drawing Specificaions and descripion RKR 53 Rero-reflecive phooelecric sensor for foils Dimensioned drawing en 04-2012/06 50108252-01 1 khz 0 1.8m 10-30 V DC We reserve he righ o make changes DS_RKR53642_en_50108252-01.fm

More information

Electrical connection

Electrical connection Reference scanner Dimensioned drawing en 02-2014/06 50117040-01 200 500mm Disance on background/reference 10-30 V DC We reserve he righ o make changes DS_HRTR46Bref_en_50117040_01.fm Robus objec deecion

More information

Connection. Input II EEx ia IIC without SC red. Composition

Connection. Input II EEx ia IIC without SC red. Composition Sandsill conroller Oupu: relay Connecion Inpu I EEx ia IIC Inpu II EEx ia IIC 1-channel Conrol circui EEx ia IIC Addiional inpu or roaion direcion deecion or sar-up override 2 relay oupus Inpu requency

More information

Retro-reflective photoelectric sensor with polarization filter for bottles. Dimensioned drawing

Retro-reflective photoelectric sensor with polarization filter for bottles. Dimensioned drawing Specificaions and descripion PRK 53 Rero-reflecive phooelecric sensor wih polarizaion filer for boles Dimensioned drawing en 04-2012/06 50112986-01 1 khz 0 3.5m 10-30 V DC We reserve he righ o make changes

More information

Photo-electric detectors

Photo-electric detectors Phoo-elecric deecors Osiris specific applicaion deecors, mechanical handling series d.c. supply. Solid sae oupu pages /8 o / References, characerisics Compac design Sysem hru-beam Reflex Diffuse Diffuse

More information

Laser retro-reflective photoelectric sensor with polarization filter. Dimensioned drawing

Laser retro-reflective photoelectric sensor with polarization filter. Dimensioned drawing Specificaions and descripion PRKL 3B Laser rero-reflecive phooelecric sensor wih polarizaion filer Dimensioned drawing en 09-2012/06 50105363 2 khz 0 3m 10-30 V DC We reserve he righ o make changes DS_PRKL3B622_en_50105363.fm

More information

Laser retro-reflective photoelectric sensor with polarisation filter. Dimensioned drawing

Laser retro-reflective photoelectric sensor with polarisation filter. Dimensioned drawing Specificaions and descripion PRKL 3B Laser rero-reflecive phooelecric sensor wih polarisaion filer Dimensioned drawing en 08-2011/04 50105363 2 khz 0 3m 10-30 V DC Polarized rero-reflecive phooelecric

More information

MODEL: M6SXF1. POWER INPUT DC Power R: 24 V DC

MODEL: M6SXF1. POWER INPUT DC Power R: 24 V DC Tension-Clamp Ulra-Slim Signal Condiioners M6S Series FUNCTION MODULE (PC programmable) Funcions & Feaures Mainenance-free ension clamp connecion Single inpu filer and funcion module 12 ypes of funcions

More information

Solid-state Timer H3CR

Solid-state Timer H3CR Solid-sae Timer H3CR DIN 48 x 48-mm Mulifuncional Timer Series Conforms o EN61812-1 and IEC60664-1 4 kv/2 for Low Volage, and EMC Direcives. Approved by UL and CSA. Lloyds/NK approvals. Six-language insrucion

More information

Laser retro-reflective photoelectric sensor with polarisation filter. Dimensioned drawing. Teach button Optical axis Indicator diode

Laser retro-reflective photoelectric sensor with polarisation filter. Dimensioned drawing. Teach button Optical axis Indicator diode Specificaions and descripion Leuze elecronic Laser rero-reflecive phooelecric sensor wih polarisaion filer Dimensioned drawing Par No. 501 06860 2 khz 0 3m 10-30 V DC Polarised, laser rero-reflecive phooelecric

More information

700 FS H 3 U U FS A 3 A U23

700 FS H 3 U U FS A 3 A U23 Bullein -F Produc Overview/Produc elecion Bullein -F High Performance Timing Relay Adjusable funcion and iming range iming relays DIN Rail mouned wihou cos of socke. mm wide muli-funcion or single funcions

More information

MODEL: M6NXF1. POWER INPUT DC Power R: 24 V DC

MODEL: M6NXF1. POWER INPUT DC Power R: 24 V DC Screw Terminal Ulra-Slim Signal Condiioners M6N Series FUNCTION MODULE (PC programmable) Funcions & Feaures Single inpu filer and funcion module 12 ypes of funcions are PC programmable 7.5-mm wide ulra-slim

More information

Multicolor contrast sensor. Dimensioned drawing

Multicolor contrast sensor. Dimensioned drawing Mulicolor conras sensor Dimensioned drawing en 01-2016/06 50133231 12-30 V DC 15 khz 13mm We reserve he righ o make changes DS 2_en_50133231.fm Easy o adjus hrough display of he signal srengh on he device

More information

H3CR. Multifunctional Timer Twin Timer Star-delta Timer Power OFF-delay Timer H3CR-A H3CR-AS H3CR-AP H3CR-A8 H3CR-A8S H3CR-A8E H3CR-G H3CR-G8EL

H3CR. Multifunctional Timer Twin Timer Star-delta Timer Power OFF-delay Timer H3CR-A H3CR-AS H3CR-AP H3CR-A8 H3CR-A8S H3CR-A8E H3CR-G H3CR-G8EL Solid-sae Timer H3CR Please read and undersand his caalog before purchasing he producs. Please consul your OMRON represenaive if you have any quesions or commens. Refer o Warrany and Applicaion Consideraions

More information

Laser retro-reflective photoelectric sensor with polarization filter. Dimensioned drawing

Laser retro-reflective photoelectric sensor with polarization filter. Dimensioned drawing Specificaions and descripion PRKL 3B Laser rero-reflecive phooelecric sensor wih polarizaion filer Dimensioned drawing en 11-2016/01 50105363-02 2 khz 0 3m 10-30 V DC We reserve he righ o make changes

More information

Trigger high-speed, retro-reflective sensors for bottles. Dimensioned drawing

Trigger high-speed, retro-reflective sensors for bottles. Dimensioned drawing Trigger high-speed, rero-reflecive sensors for boles Dimensioned drawing en 03-2014/10 50121192-02 10-30 V DC 0 3.6m 5 khz We reserve he righ o make changes DS_PRK18BFX_en_50121192_02.fm Trigger high-speed,

More information

Monitoring Relays. Current Monitoring A A DIN. Comat products comply with different international standards and are certified accordingly.

Monitoring Relays. Current Monitoring A A DIN. Comat products comply with different international standards and are certified accordingly. Monioring elays Curren Monioring DI Coma producs comply wih differen inernaion sandas and are cerified accoingly. Curren Monioring elays EOC- EUC-B -05-30 -60 JUST LOOP IT LOD Seing ranges x x 3x 4x 5x

More information

Switch Basics and Applications. Selection Service Speed

Switch Basics and Applications. Selection Service Speed Swich Basics and Applicaions Selecion Service Speed Inroducion Basic Swich Types and Applicaions Swich Funcion - Mechanical Poles and Throws, Mechanical Characerisics Swich Funcion - Elecrical Volage and

More information

Programmable DC Electronic Loads 8600 Series

Programmable DC Electronic Loads 8600 Series Daa Shee 2U half-rack 3U 6U USB RS232 GPIB The programmable DC elecronic loads provide he performance of modular sysem DC elecronic loads in a compac benchop form facor. Wih fas ransien operaion speeds

More information

MX6895BETR. -550V Full Bridge Gate Driver INTEGRATED CIRCUITS DIVISION. Features. Description. Applications. Ordering Information

MX6895BETR. -550V Full Bridge Gate Driver INTEGRATED CIRCUITS DIVISION. Features. Description. Applications. Ordering Information -550V Full Bridge Gae Driver INTEGRATED CIRCUITS DIVISION Feaures Full Bridge Gae Driver Inernal High Volage Level Shif Funcion Negaive 550V Lamp Supply Volage 3V o 12V CMOS Logic Compaible 8V o 12V Inpu

More information

Programmable DC Electronic Loads 8600 Series

Programmable DC Electronic Loads 8600 Series Daa Shee Programmable DC Elecronic Loads 99 Washingon Sree Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visi us a www.tesequipmendepo.com 2U half-rack 3U 6U USB RS232 GPIB The programmable

More information

H3DS. Solid-state Multi-functional Timer. Ordering Information. DIN Track Mounted, Standard 17.5-mm Width Timer Range

H3DS. Solid-state Multi-functional Timer. Ordering Information. DIN Track Mounted, Standard 17.5-mm Width Timer Range Solid-sae Muli-funcional Timer DIN Track Mouned, Sandard 17.5-mm Widh Timer Range A wide AC/DC power supply range (24 o 230 VAC/ 24 o 48 VDC) reduces he number of imer models kep in sock. Eigh operaing

More information

Installation and Operating Instructions for ROBA -brake-checker Typ

Installation and Operating Instructions for ROBA -brake-checker Typ (B.018102.EN) Guidelines on he Declaraion of Conformiy A conformiy evaluaion has been carried ou for he produc in erms of he EC Low Volage Direcive 2006/95/ EC and EMC Direcive 2004/108/EC. The Declaraion

More information

Power Amplifier EEA-PAM-5**-A-32 for Proportional Control Valves Contents The following power amplifier models are covered in this catalog

Power Amplifier EEA-PAM-5**-A-32 for Proportional Control Valves Contents The following power amplifier models are covered in this catalog Vickers Accessories Power Amplifier EEA-PAM-5**-A-32 for Proporional Conrol Valves Conens The following power amplifier models are covered in his caalog Power Amplifier EEA-PAM-513-A-32 EEA-PAM-523-A-32

More information

Programmable DC Electronic Load 8600 Series

Programmable DC Electronic Load 8600 Series Daa Shee Programmable DC Elecronic Load The programmable DC elecronic loads provide he performance of modular sysem DC elecronic loads in a compac benchop form facor. Wih fas ransien operaion speeds and

More information

Programmable DC Electronic Loads 8600 Series

Programmable DC Electronic Loads 8600 Series Daa Shee Programmable DC Elecronic Loads The programmable DC elecronic loads provide he performance of modular sysem DC elecronic loads in a compac benchop form facor. Wih fas ransien operaion speeds and

More information

3 - Zelio Time - timing relays

3 - Zelio Time - timing relays /0 - onens 0 - Zelio ime - iming relays Selecion guide for Zelio ime - iming relays.................... page /2 # Modular relays, solid sae oupu, widh 17.5 mm................. page /6 # Indusrial relays,

More information

Installation / Monitoring Technique

Installation / Monitoring Technique Insallai / Mioring Technique VARIMETER Over- and Undercurren Relay IL 9277, IP 9277, SL 9277, SP 9277 02264 IL 9277 IP 9277 SL 9277 SP 9277 According o IEC/EN 60 255, DIN VDE 0435-303 IP 9277, SP 9277,

More information

COMBITRON Program Schedule

COMBITRON Program Schedule OMBITRO Program Schedule OMBITRO are supply and acuaor modules for he elecromagne cluches and brakes. As power supply for D- or A-side swiching differen single-wave and bridge recifiers as well as rapid

More information

MCR-S-...-DCI. Current transducer up to 55 A, programmable and configurable. Data sheet _en_11. 1 Description

MCR-S-...-DCI. Current transducer up to 55 A, programmable and configurable. Data sheet _en_11. 1 Description Curren ransducer up o 55 A, programmable and configurable Daa shee 100241_en_11 PHOENIX CONTACT 2012-06-07 1 Descripion The MCR-S-...-DCI curren ransducers offer users he opion of ordering a preconfigured

More information

Flow Switch LABO-RR.-032-S. Characteristics. Technical data. Ranges

Flow Switch LABO-RR.-032-S. Characteristics. Technical data. Ranges Flow Swich LABO-RR.032-S Simple and economical flow meer for piping diameers from 32 mm o 150 mm Made from plasic (opionally sainless seel) Wih apping sleeve fixing for very rapid insallaion Rero-fiing

More information

TIMERS SELECTION GUIDE

TIMERS SELECTION GUIDE MONTH MONTH TIMER ELECTION GIDE Timing Chars. ON Delay. Inerval ON. Rising Edge One ho. Asymmeric Repea Cycle OFF. ardela ar Relay. ignal ON Delay. Inerval ON / OFF Delay wih Rerigger. Rising Edge wih

More information

Installation / monitoring technique

Installation / monitoring technique Insallai / mioring echnique Over- and undercurren relay varimeer IL 9277, IP 9277, SL 9277, SP 9277 Now available wih ranges up o 100 A! 02264 IL 9277 SL 9277 IP 9277 SP 9277 According o IEC/EN 60 255,

More information

Universal microprocessor-based ON/OFF and P programmable controller MS8122A MS8122B

Universal microprocessor-based ON/OFF and P programmable controller MS8122A MS8122B COMPETENCE IN MEASUREMENT Universal microprocessor-based ON/OFF and P programmable conroller MS8122A MS8122B TECHNICAL DESCRIPTION AND INSTRUCTION FOR USE PLOVDIV 2003 1 I. TECHNICAL DATA Analog inpus

More information

Technical Catalogue. Relays. Timer Relays Monitoring Relays Motor Protection Relays

Technical Catalogue. Relays. Timer Relays Monitoring Relays Motor Protection Relays Technical Caalogue Relays Timer Relays Monioring Relays Moor Proecion Relays Relays Conens Elecronic ime relays, Series C 560... 5 Selecion, echnical daa, ordering deails... 6 Funcion able, device wiring

More information

Zelio Plug-In Relays. RUM universal range. Catalog

Zelio Plug-In Relays. RUM universal range. Catalog Zelio Plug-In Relays RM universal range Caalog 0 Couresy of Seven Engineering, Inc. - (00) -00 - sales@seveneng.com - www.sevenengineering.com Couresy of Seven Engineering, Inc. - (00) -00 - sales@seveneng.com

More information

SCiCoreDrive62 +DC T5 U V W -DC. SCiCore 62. IGBT/MOSFET drivers

SCiCoreDrive62 +DC T5 U V W -DC. SCiCore 62. IGBT/MOSFET drivers PRELIMINARY TECHNICAL INFORMATION SCiCoreDrive62 IGBT/MOSFET drivers HIGHLIGHTS - 6 channel IGBT driver - suiable for 200V IGBT (900 V max on DCLink) - Up o 8 A peak oupu curren - Collecor sensing & faul

More information

Series SHDC Output: 40A,100 Vdc and 20A,200 Vdc High Industrial Performance (HIPpak) DC Solid-State Relays

Series SHDC Output: 40A,100 Vdc and 20A,200 Vdc High Industrial Performance (HIPpak) DC Solid-State Relays Oupu: 4A,1 Vdc and 2A,2 Vdc FEATURES/BENEFITS Laes generaion MOSFET echnology Ulra low on-sae resisance Low oupu leakage curren Buil-in overvolage proecion Reverse proeced riggered conrol inpu o avoid

More information

Time - timing relays 3

Time - timing relays 3 Selecion guide Zelio ime - iming relays Applicaions Oupu hese iming relays enable simple auomaion cycles o be se up using wired logic. hey can also be used o complemen he funcions of PLs. Solid sae iming

More information

Model Number Structure

Model Number Structure Solid-sae Muli-funcional Timer H3CR-A Timers DIN 48 x 48-mm Sae-of-he-ar Mulifuncional Timer A wider power range reduces he number of imer models kep in sock. A wide range of applicaions hrough six or

More information

Three phase full Bridge with Trench MOSFETs in DCB isolated high current package

Three phase full Bridge with Trench MOSFETs in DCB isolated high current package MTI2WX75GD Three phase full Bridge wih Trench MOSFETs in DCB isolaed high curren package S = 75 V 25 = 255 R DSon yp. = 1.1 mw Par number MTI2WX75GD G1 L1+ L2+ T1 T3 T5 G3 G5 L3+ Surface Moun Device S1

More information

Siemens AG Overview Expansion module for the LOGO! basic versions For communication between the LOGO! master and external EIB components via EIB

Siemens AG Overview Expansion module for the LOGO! basic versions For communication between the LOGO! master and external EIB components via EIB LOGO! Logic Modules LOGO! CM EIB/KNX communicaion modules Overview Expansion module for he LOGO! basic versions For communicaion beween he LOGO! maser and exernal EIB componens via EIB LOGO! CM EIB/KNX

More information

Electrical amplifiers

Electrical amplifiers Elecrical amplifiers RE 30/0.0 Replaces: 09.05 / Type VT-VSPA- and VT-VSPAK- Componen series X H589_d Table of conens Conens Page Feaures Ordering code Funcional descripion and 3 Block circui diagram /

More information

Selection guide Zelio Time - timing relays 0

Selection guide Zelio Time - timing relays 0 Selecion guide Zelio ime - iming relays 0 Applicaions Oupu hese iming relays enable simple auomaion cycles o be se up using wired logic. hey can also be used o complemen he funcions of PLs. Solid sae iming

More information

Sensing method Application Appearance Sensing distance Model Convergent-reflective Small type 30±3 mm

Sensing method Application Appearance Sensing distance Model Convergent-reflective Small type 30±3 mm Auhorised Disribuors:- AS & AAIN INDIA PV D S-, F.I.E.E., Okhla Indusrial Area, Phase-ii, New Delhi-(India) el : -9 Fax : -9 E-mail : sales@ashalain.com Compac ead Amplifier-separaed Phooelecric Sensor

More information

GTZ 25 / 40 / 55. TECHNICAL DATA General features. Category of use: AC51, AC53a

GTZ 25 / 40 / 55. TECHNICAL DATA General features. Category of use: AC51, AC53a GTZ 25 / 40 / 55 THEE-PHASE SOLID STATE ELAYS WITH LOGIC CONTOL Main applicaions Thermoforming Plasic exrusion lines Indusrial ovens and furnaces Hea reamens Conrol applicaions wih high swiching speed

More information

OPS Solar Inverter Specification & Manual

OPS Solar Inverter Specification & Manual Solar Inverer Specificaion & Manual Conens 1 FEATURES... 2 2 TECHNICAL SPECIFICATION... 4 3 APPLICATION... 7 3.1 LED DISPLAY STATUS... 7 3.2 POWER SAVING MODE... 8 3.3 OUTPUT FREQUENCY SETTING... 8 3.4

More information

<Diode Modules> RM200CY-24S HIGH POWER SWITCHING USE INSULATED TYPE

<Diode Modules> RM200CY-24S HIGH POWER SWITCHING USE INSULATED TYPE dual swich (Cahode Common) Forward curren...... 2 0 0 A Repeiive peak reverse volage V RRM... 1 2 0 0 V Maximum juncion emperaure T jmax... 1 5 0 C Fla base Type Copper base plae RoHS Direcive

More information

Three phase full Bridge with Trench MOSFETs in DCB-isolated high-current package

Three phase full Bridge with Trench MOSFETs in DCB-isolated high-current package MTI145WX1GD Three phase full Bridge wih Trench MOSFETs in DCB-isolaed high-curren package S = 1 V 5 = 19 R DSon yp. = 1.7 mw Par number MTI145WX1GD L1+ L+ L3+ G1 G3 G5 Surface Moun Device S1 S3 S5 L1 L

More information

AK8777B. Overview. Features

AK8777B. Overview. Features AK8777B Hall Effec IC for Pulse Encoders Overview The AK8777B is a Hall effec lach which deecs boh verical and horizonal (perpendicular and parallel o he marking side of he package) magneic field a he

More information

Exactly on time and economic switching timing relays ETR and DIL ET

Exactly on time and economic switching timing relays ETR and DIL ET Exacly on ime and economic swiching iming relays ETR and DIL ET Tailor-made for every applicaion; all componens feaure he benefis of a series well hough-ou righ down o he fines deail. The iming relays

More information

ECMA st Edition / June Near Field Communication Wired Interface (NFC-WI)

ECMA st Edition / June Near Field Communication Wired Interface (NFC-WI) ECMA-373 1 s Ediion / June 2006 Near Field Communicaion Wired Inerface (NFC-WI) Sandard ECMA-373 1 s Ediion / June 2006 Near Field Communicaion Wired Inerface (NFC-WI) Ecma Inernaional Rue du Rhône 114

More information

Disribued by: www.jameco.com 1-800-831-4242 The conen and copyrighs of he aached maerial are he propery of is owner. 16K-Bi CMOS PARALLEL E 2 PROM FEATURES Fas Read Access Times: 200 ns Low Power CMOS

More information

PSI 9000 WR Series. High Efficiency Programmable DC Power Sources. 3.3 kw to 15 kw THE POWER TEST EXPERTS.

PSI 9000 WR Series. High Efficiency Programmable DC Power Sources. 3.3 kw to 15 kw THE POWER TEST EXPERTS. PSI 9000 WR Series 3.3 kw o 15 kw High Efficiency Programmable DC Power Sources THE POWER TEST EXPERTS PSI 9000 WR Series 3.3 kw o 15 kw Produc Overview The microprocessor conrolled high efficiency laboraory

More information

MODEL: M8PP1. [4] OUTPUT PULSE WIDTH 1: Equal to the input 2: One-shot output (std. pulse width 50 ms) Specify when optional pulse width is required.

MODEL: M8PP1. [4] OUTPUT PULSE WIDTH 1: Equal to the input 2: One-shot output (std. pulse width 50 ms) Specify when optional pulse width is required. MODE: M8PP1 Dual Oupu Super-mini Signal ondiioners Pico-M Series Max. 50 kz for volage pulse inpu PUSE ISOTOR (buil-in exciaion, E) Funcions & Feaures mplifying, waveshaping a pulse rae inpu and providing

More information

Photo Modules for PCM Remote Control Systems

Photo Modules for PCM Remote Control Systems Phoo Modules for PCM Remoe Conrol Sysems Descripion The HS38B series are miniaurized receivers for infrared remoe conrol sysems. PIN diode and preamplifier are assembled on lead frame, he epoxy package

More information

Valve amplifiers for proportional pressure valves

Valve amplifiers for proportional pressure valves Valve amplifiers for proporional pressure valves Type VT-VSPA-, VT-VSPAK- RE 30 Ediion: 03- Replaces: 0.0 Componen series X Suiable for he conrol of all direc and pilo operaed proporional pressure valves

More information

4 20mA Interface-IC AM462 for industrial µ-processor applications

4 20mA Interface-IC AM462 for industrial µ-processor applications Because of he grea number of indusrial buses now available he majoriy of indusrial measuremen echnology applicaions sill calls for he sandard analog curren nework. The reason for his lies in he fac ha

More information

Engines (diesel, HFO ) and gas turbines

Engines (diesel, HFO ) and gas turbines Engines (diesel, HFO ) and gas urbines Energy Efficiency Produce power from your exhaus fumes www.aqylon.com Environmenally friendly s organic working fluids have a very low Global Warming Poenial (320).

More information

General Introduction. These modules present a number of practical advantages to the user.

General Introduction. These modules present a number of practical advantages to the user. General Inroducion In measuremen, posiioning and conrol applicaions, i is necessary o monior and indicae he saus of he machine or insallaion. In order for he signal o be processed by he programmable conroller,

More information

Ethernet system for length measurement, 24-bit 16/8/4 inductive transducers, LVDT, Half-Bridge, Mahr

Ethernet system for length measurement, 24-bit 16/8/4 inductive transducers, LVDT, Half-Bridge, Mahr CH0 CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH CH9 CH10 CH11 CH12 CH13 CH14 CH15 Couner 0 Couner 1 Couner 2 Couner 3 sysem for lengh measuremen, 24-bi //4 inducive ransducers,, Half-Bridge, Mahr New! 32 digial I/O

More information

Ultracompact 6-Channel Backlight and Flash/Torch White LED Driver

Ultracompact 6-Channel Backlight and Flash/Torch White LED Driver Feaures and Benefis Proprieary adapive conrol scheme (1, 1.5, 2 ) 0.5% ypical LED curren maching 2 separae serial inerfaces for dimming conrol Drives up o 6 whie LEDs (4 display backligh, 2 flash/orch)

More information

Relays, Timers, Interface Modules, Sockets and Accessories Catalogue. The power in relays and timers since 1954

Relays, Timers, Interface Modules, Sockets and Accessories Catalogue. The power in relays and timers since 1954 Relays, imers, Interface Modules, Sockets and Accessories. 003-004 Catalogue he power in relays and timers since 954 he power in relays ISO 900 ISO 400 Our four factories produce over 50,000 relays every

More information

Electric amplifiers. Table of contents. Features. RE 30095/04.11 Replaces: Types VT 5005 to VT Component series 1X 1/8

Electric amplifiers. Table of contents. Features. RE 30095/04.11 Replaces: Types VT 5005 to VT Component series 1X 1/8 Elecric amplifiers RE 30095/04. Replaces: 05.0 /8 Types VT 5005 o VT 5008 Componen series X 558_d Table of conens Conens Page eaures Ordering code uncional descripion Block diagram / pinou: VT 5005 and

More information

Installing remote sites using TCP/IP

Installing remote sites using TCP/IP v dc Keypad from nework Whie/ 3 Whie/ 4 v dc Keypad from nework Whie/ 3 Whie/ 4 v dc Keypad from nework Whie/ 3 Whie/ 4 +v pu +v pu +v pu v dc Keypad from nework Whie/ 3 Whie/ 4 v dc Keypad from nework

More information

CR DIN-Relays. Interface modules CR 7. Recommended application 6/5A 3A 2A 1A. 1mA. 2x 1. 3x 1 1 CR16... C C103.06

CR DIN-Relays. Interface modules CR 7. Recommended application 6/5A 3A 2A 1A. 1mA. 2x 1. 3x 1 1 CR16... C C103.06 CC/...V 4 0 µ0mv... 5Va/0VD Ag/Au-plaed signal relay 3 6A 50VA C6A.. /...V X= 3 3 00µ00mV... 3A 50Va/30VD 0,40VDmax C3A/...V 3 3 4 00µ00mV... 3A 50Va/30VD 0,40VDmax C33A/...V 3 o max 6A A 0-40VA 0A, 50Va

More information

Intelligent Interface Modules

Intelligent Interface Modules General Inroducion In measuremen, posiioning and conrol applicaions, i is necessary o monior and indicae he saus of he machine or insallaion. In order for he signal o be processed by he programmable conroller,

More information

Model Number Structure

Model Number Structure Solid-sae Muli-funcional Timers CSM DS_E_6_ Muliple Operaing Modes and Muliple Time Ranges. DIN 48 x 48-mm Mulifuncional Timer wih Wide AC/DC Supply Range for Boh High and Low Volages. A wide AC/DC power

More information