H3DS. Solid-state Multi-functional Timer. Ordering Information. DIN Track Mounted, Standard 17.5-mm Width Timer Range

Size: px

Start display at page:

Download "H3DS. Solid-state Multi-functional Timer. Ordering Information. DIN Track Mounted, Standard 17.5-mm Width Timer Range"

Mitchell O’Connor’
6 years ago
Views:

Solid-sae Muli-funcional Timer DIN Track Mouned, Sandard 17.5-mm Widh Timer Range A wide AC/DC power supply range (24 o 230 VAC/ 24 o 48 VDC) reduces he number of imer models kep in sock.

1 Solid-sae Muli-funcional Timer DIN Track Mouned, Sandard 17.5-mm Widh Timer Range A wide AC/DC power supply range (24 o 230 VAC/ 24 o 48 VDC) reduces he number of imer models kep in sock. Eigh operaing modes (-M) and four operaing modes (-S) cover a wide range of applicaions. A wide ime seing range of 0.10 s o 120 h. Two LEDs indicae power and relay saus respecively. Smar Dial/Selecor-locking Mechanism: Prevens he dials and selecors on he Timer s fron panel from being inadverenly operaed or being operaed wihou auhorizaion. The lock can only be unlocked and locked wih an opional pen-ype Lock Key. Screwless spring erminal ype available. Sicker provided for easy imer idenificaion and managemen. Terminal clamp lef open when delivered (screw erminal ype). Finger proecion erminal block o mee VDE0106/P100. Enables easy sequence checks hrough insananeous oupus for a zero se value a any ime range. Conforms o EN and IEC (VDE0110) 4 kv/2. Conforms o EMC sandards (EN and EN ). Ordering Informaion Supply volage Conrol o oupu Inpu ype Operaing mode (see noe) 24 o 230 VAC (50/60Hz)/ 24 o 48 VDC Conac oupu: SPDT (ime-limi oupu SPDT) Volage inpu Eigh muli-modes: A, B, B2, C, D, E, G, J No-inpu available Four muli-modes: A, B2, E, J Screw erminal ype -ML -SL Model Screwless spring erminal ype -MLC -SLC Single mode: A -AL -ALC Noe: The operaing modes are as follows: A: ON-delay B: Flicker OFF sar B2: Flicker ON sar C: Signal ON/OFF-delay D: SIgnal OFF-delay E: Inerval G: Signal ON/OFF-delay J: One sho 4

2 Model Number Legend - L M: Muli-funcion ype S: Sandard ype A: Single-funcion ype 2. L: Smar lock mechanism 3 3. None:Screw erminal ype C: Screwless spring erminal ype Accessories (Order Separaely) Lock Key Y92S-38 Mouning Track 50 cm (l) x 7.3 mm () PFP-50N 1 m (l) x 7.3 mm () PFP-100N 1 m (l) x 16 mm () PFP-100N2 End Plae PFP-M Spacer PEP-S Specificaions General Iem -ML -SL -AL Operaing mode A: ON-delay (Signal or ) A: ON-delay A: ON-delay (fixed) B: Flicker OFF sar (Signal or ) B2: Flicker ON sar B2: Flicker ON sar (Signal or ) E: Inerval C: Signal ON/OFF-delay J: One-sho D: Signal OFF-delay E: Inerval (Signal or ) G: Signal ON/OFF-delay J: One-sho (Signal or ) Inpu ype Volage inpu --- Oupu ype Relay: SPDT Exernal connecions Screw erminal, screwless spring erminal Terminal block Screw erminal ype: Clamps wo 2.5-mm max. bar erminals wihou sleeves. Screwless spring erminal ype: Clamps wo 1.5-mm max. bar erminals wihou sleeves. Terminal screw 0.98 N m max. ighening orque Mouning mehod DIN rack mouning (see noe) Aachmen Nameplae label Approved sandards UL508, CSA 22.2 No.14 Conforms o EN , IEC (VDE0110) 4 kv/2, VDE0106/P100 Conforms o IEC (AC-13; 250 V 5 A/AC-14; 250 V 1 A/AC-15; 250 V 1 A/DC-13; 30 V 0.1 A/DC-14; 30 V 0.05 A) Conforms o EN and EN Noe: Can be mouned o DIN Track wih a plae hickness of 1 o 2.5 mm. Time Ranges Time scale display Time range 0.1 s 0.1 o 1.2 s 1 s 1 o 12 s 0.1 m 0.1 o 1.2 min 1 m 1 o 12 min 0.1 h 0.1 o 1.2 h 1 h 1 o 12 h 10 h 10 o 120 h Noe: When he ime seing dial is se o 0 for any ime scale, he oupu will operae insananeously. 5

3 Raings Raed supply volage (see noes 1 and 2) Operaing volage range rese Rese volage consumpion (see noe 3) Volage inpu -ML -SL -AL 24 o 230 VAC (50/60 Hz)/24 o 48 VDC 85% o 110% of raed supply volage Minimum power-off ime: 0.1 s 2.4 VAC/DC max. AC: approx VA (1.8 W) a 230 VAC DC: approx. 0.6 W a 24 VDC AC: approx VA (1.8 W) a 230 VAC DC: approx. 0.6 W a 24 VDC AC: approx VA (1.8 W) a 230 VAC DC: approx. 0.6 W a 24 VDC Max. permissible capaciance beween inpus lines (erminals and A2): 2,000 pf Load connecable in parallel wih inpus (erminals and A1). H-level: 20.4 o 253 VAC/20.4 o 52.8 VDC L-level: 0 o 2.4 VAC/DC Conrol oupu Conac oupu: 5 A a 250 VAC wih resisive load (cosφ = 1) 5 A a 30 VDC wih resisive load (cosφ = 1) Ambien emperaure Operaing: 10 C o 55 C (wih no icing) Sorage: 25 C o 65 C (wih no icing) Ambien humidiy Operaing: 35% o 85% Noe: 1. DC ripple rae: 20% max. 2. Since an inrush curren of 0.4 A will occur when using he power supply volage a 24 VDC, pay careful aenion when urning on or off he power supply o he Timer wih a solid-sae oupu such as a sensor. 3. The power consumpion is for mode A afer he Timer couns he ime-up ime and for he AC inpu a 50 Hz. The power consumpion of he -ML includes he inpu circui wih he and A1 erminals shor-circuied. 6

4 Characerisics Accuracy of operaing ime ±1% max. of FS (±1% ±10 ms max. a 1.2-s range) Seing error ±10% 50 ms max. of FS Signal inpu ime 50 ms min. Influence of volage ±0.5% max. of FS (±0.5% ±10 ms max. a 1.2-s range) Influence of emperaure ±2% max. of FS (±2%±10 ms max. a 1.2-s range) Insulaion resisance 100 MΩ min. a 500 VDC Dielecric srengh Beween curren-carrying meal pars and exposed non-curren-carrying meal pars: 2,000 VAC for 1 min. Beween conrol oupu erminals and operaing circui: 2,000 VAC for 1 min. Beween conacs no locaed nex o each oher: 1,000 VAC for 1 min. Vibraion resisance Malfuncion: 0.5-mm single ampliude a 10 o 55 Hz Desrucion: 0.75-mm single ampliude a 10 o 55 Hz Shock resisance Malfuncion: 100 m/s 2 3 imes each in 6 direcions Desrucion: 1,000 m/s 2 3 imes each in 6 direcions Impulse wihsand volage 3 kv (beween power erminals) 4.5 kv (beween curren-carrying meal pars and exposed non-curren-carrying meal pars) Noise immuniy Square-wave noise generaed by noise simulaor (pulse widh: 100 ns/1 µs, 1-ns rise) ±1.5 kv Saic immuniy Malfuncion: 4 kv Desrucion: 8 kv Life expecancy Mechanical: 10 million operaions min. (under no load a 1,800 operaions/h) Elecrical: 100,000 operaions min. (5 A a 250 VAC, resisive load a 360 operaions/h) (see noe) EMC (EMI): EN Emission Enclosure: EN55022 class B (equivalen o EN55011 class B) Emission AC Mains: EN55022 class B (equivalen o EN55011 class B) Harmonic Curren: EN Volage Flucuaion and Flickering: EN (EMS): EN Immuniy ESD: EN :4 kv conac discharge (level 2) 8 kv air discharge (level 3) Immuniy RF-inerference from AM Radio Waves: ENV50140: 10 V/m (80 MHz o 1 GHz) (level 3) Immuniy RF-inerference from Pulse-modulaed Radio Waves: ENV50204: 10 V/m (900 ±5 MHz) (level 3) Immuniy Conduced Disurbance: ENV50141: 10 V (0.15 o 80 MHz) (level 3) Immuniy Burs: EN :2 kv power line (level 3) 2 kv I/O signal line (level 4) Case color Ligh gray (5Y7/1) Enclosure raing IP30 (Terminal block: IP20) Weigh 100 g Noe: For reference: A maximum curren of 0.15 A can be swiched a 125 VDC (cosφ=1). A maximum curren of 0.1 A can be swiched if L/R is 7 ms. In boh cases, a life of 100,000 operaions can be expeced. The minimum applicable load is 10 ma a 5 VDC (failure level: P). 7

5 Nomenclaure -ML /-SL Oupu indicaor (orange) (Li while Timer oupu is ON.) Se ime window Time scale display window and selecor (selec one from 1 s, 0.1 s, 1 h, 0.1 h, 10 h, 1 h, 1 m, and 0.1 m) Operaing mode display window and selecor (selec he mode from A, B, B2, C, D, E, G, and J for he -ML, from A, B2, E, and J for he -SL) Time seing dial (se ime) Lock for ime seing dial Lock for ime scale selecor Lock for operaing mode selecor -ON indicaor (green) (Li while he power is ON.) Aach he enclosed label here as a nameplae. (The label is aached o he Timer s DIN Track hook secion a he ime of shipmen.) -AL Oupu indicaor (orange) (Li while Timer oupu is ON.) Se ime window Time scale display window and selecor (selec one from 1 s, 0.1 s, 1 h, 0.1 h, 10 h, 1 h, 1 m, and 0.1 m) Time seing dial (se ime) Lock for ime seing dial Lock for ime scale selecor -ON indicaor (green) (Li while he power is ON.) (Fron View) Operaion Block Diagram -ML AC (DC) inpu Zero seing deecion circui Time scale/ uni selecors Operaing mode selecor supply circui Oscillaion circui Couning circui Oupu circui Sar inpu Inpu circui Indicaor circui -ON indicaor Oupu indicaor 8

6 -SL /-AL AC (DC) inpu Zero seing deecion circui Time scale/ uni selecors Operaing mode selecor supply circui Oscillaion circui Couning circui Oupu circui Indicaor circui -ON indicaor Oupu indicaor I/O Funcions Iem -ML -SL /-AL Inpu Sar Sars operaion. No inpu is available. Oupu Conrol oupu Oupus are urned ON according o designaed oupu mode when prese value is reached. Basic Operaion Seing of Selecor The selecors can be urned clockwise and counerclockwise o selec he desired ime scale, or operaing mode. Each selecor has a snap mechanism ha secures he selecor a a given posiion. Se he selecor a a posiion a which i is secured. Do no se i midway beween wo securing posiions or a malfuncion could resul from improper seing. Selecion of Operaing Mode (excep for -AL) The -ML/-SL can be se o any one of he operaing modes A o J. Turn he operaing mode selecor wih a screwdriver unil he desired operaing mode appears in he operaing mode display window. -ML (8 modes): A, B, B2, C, D, E, G, J (In order of appearance) -SL (4 modes): A, E, B2, J, E, E, J, J (In order of appearance) Noe: Leers ha appear more han once indicae exacly he same operaing mode. Selecion of Time Scale The ime scale is seleced by urning he ime scale selecor. The ime scales will appear in he following order in he ime scale display window on he lef of he selecor: 1 s, 0.1 s, 1 h, 0.1 h, 10 h, 1 h, 1 m, 0.1 m. Noe: The ime scale 1h appears wice. Boh insances indicae exacly he same ime scale. Oupus are urned ON according o designaed oupu mode when prese value is reached. Locking/Unlocking of Selecors and Time Seing Dial The ime seing dial, ime scale selecor, and operaing mode selecor can be locked using he Y92S-38 Lock Key, a special pen ype ool ha is sold separaely. To lock he dial or selecors, inser he Lock Key in he keyhole o he lower righ of he dial or selecor and urn i clockwise unil he dial or selecor is compleely covered wih he red cover. To unlock, urn he Lock Key in he opposie direcion. Key hole Time scale display window and selecor Operaing mode display window and selecor 9

7 Timing Char Noe: 1. The minimum power rese ime is 0.1 s and he minimum signal inpu ime is 0.05 s. 2. The leer in he iming chars sands for he se ime and a means ha he period is less han he ime se. Operaing Timing char mode A: ON-delay a (A 1 and A 2 ) Basic operaion Sar (B 1 and A 2 ) (see noe) Oupu relay: NC Sar B: Flicker OFF sar Oupu relay: NO (oupu indicaor) indicaor (A 1 and A 2 ) a a Oupu For power-on operaion, impose volage o he Sar inpu. The Timer sars operaing a he momen he power is urned on. Sar inpu is invalid while he Timer is in operaion. Basic operaion B2: Flicker ON sar Sar (B 1 and A 2 ) (see noe) Oupu relay: NC Oupu relay: NO (oupu indicaor) indicaor (A 1 and A 2 ) a a Sar Oupu For power-on operaion, impose volage o he Sar inpu. The Timer sars operaing a he momen he power is urned on. Sar inpu is invalid while he Timer is in operaion. Basic operaion Sar (B 1 and A 2 ) (see noe) Oupu relay: NC Sar C: Signal ON/OFFdelay Oupu relay: NO (oupu indicaor) indicaor (A 1 and A 2 ) a a Oupu For power-on operaion, impose volage o he Sar inpu. The Timer sars operaing a he momen he power is urned on. Sar inpu is invalid while he Timer is in operaion. Sar (B 1 and A 2 ) (see noe) Basic operaion Oupu relay: NC Oupu relay: NO (oupu indicaor) Sar Oupu Noe: indicaor Sar inpu is invalid while he Timer is in operaion. The sar inpu of he -ML model is acivaed by applying a volage o and A2 erminals. The volage can be applied by urning on he conac beween and A1 (Refer o Terminal Arrangemen). 10

8 Operaing mode D: Signal OFF-delay (A 1 and A 2 ) Timing char a a a Sar (B 1 and A 2 ) (see noe) Oupu relay: NC Oupu relay: NO (oupu indicaor) Basic operaion Sar Oupu indicaor Sar inpu is valid and re-riggerable while he Timer is in operaion. E: Inerval a a (A 1 and A 2 ) Basic operaion G: Signal ON/OFFdelay J: One-sho oupu (ON delay) Noe: Sar (B 1 and A 2 ) (see noe) Oupu relay: NC Oupu relay: NO (oupu indicaor) indicaor (A 1 and A 2 ) Sar (B 1 and A 2 ) (see noe) Oupu relay: NC Oupu relay: NO (oupu indicaor) indicaor (A 1 and A 2 ) Sar (B 1 and A 2 ) (see noe) Oupu relay: NC Oupu relay: NO (oupu indicaor) indicaor Approx. 1±0.6 s (fixed) a a Approx. 1±0.6 s (fixed) Approx. 1±0.6 s (fixed) Sar Oupu For power-on operaion, impose volage o he Sar inpu. The Timer sars operaing a he momen he power is urned on. Sar inpu is valid and re-riggerable while he Timer is in operaion. Sar Oupu Sar Oupu Basic operaion Sar inpu is valid and re-riggerable while he Timer is in operaion. Basic operaion The sar inpu of he -ML model is acivaed by applying a volage o and A2 erminals. The volage can be applied by urning on he conac beween and A1 (Refer o Terminal Arrangemen). Approx. 1±0.6 s (fixed) For power-on operaion, impose volage o he Sar inpu. The Timer sars operaing a he momen he power is urned on. Sar inpu is valid and re-riggerable while he Timer is in operaion. 11

9 Dimensions Noe: All unis are in millimeers unless oherwise indicaed. -ML /-SL /-AL Surface color: Ligh gray 5Y7/1 (OMRON) Insallaion Terminal Arrangemen -ML -SL /-AL A1 15 A L A A2 (see noe 1) (see noe 1) Noe: 1. DC supply volage does no require he designaion of polariy. 2. The conac symbol for he is indicaed wih because i offers muliple operaing modes and is differen from he delayed conac for convenional imers. 12

10 Inpu Connecions The inpus of he -ML are volage (volage imposiion or open) inpus. No-conac Inpu (Connecion o PNP oupu sensor.) Sensor No-conac Inpu (Connecion o NPN oupu sensor.) Timer Conac Inpu Timer (+) 24 VDC ( ) A 2 Timer (+) 24 VDC ( ) Sar A 2 A 1 A 1 Sar A 2 A 1 Operaes wih PNP ransisor ON Sensor Operaes wih NPN ransisor ON Operaes wih relay ON Volage Inpu Signal Levels No-conac inpu Conac inpu 1. Transisor ON Residual volage: 1 V max. (Volage beween erminals B 1 and A 2 mus be more han he raed H-level volage (20.4 VDC min.).) 2. Transisor OFF Leakage curren: 0.01 ma max. (Volage beween erminals B 1 and A 2 mus be less han he raed L-level volage (2.4 VDC max.).) Use conacs ha can adequaely swich 0.1 ma a each volage o be imposed. (When he conacs are ON or OFF, volage beween erminals B 1 and A 2 mus be wihin he following ranges: When conacs are ON: 20.4 o 253 VAC/20.4 o 52.8 VDC When conacs are OFF: 0 o 2.4 VAC/DC 13

11 Accessories (Order Separaely) Noe: All unis are in millimeers unless oherwise indicaed. Dimensions Lock Key Y92S-38 Mouning Track PFP-100N, PFP-50N PFP-100N ± ±0.3 27± ± ,000 (500) (see noe) (5) (see noe) , Noe: The values shown in parenheses are for he PFP-50N. End Plae PFP-M Spacer PFP-S M4 x 8 pan head screw

12 Precauions Changing of Seing NOTICE: Do no change he ime scale or operaing mode, while he Timer is in operaion or malfuncion could resul. Supplies The Series is provided wih a ransformerless power supply sysem. An elecric shock may be received if he inpu erminal or he oupu ype selecor swich is ouched while power is being supplied. Use he bar erminal for wiring he. Using a sranded-wire erminal may cause a shor-circui due o a sray wire enering ino he Timer. Boh AC and DC power supplies can be conneced o he power inpu erminals wihou regarding polariy. Wih he only, a DC power supply mus be conneced o he power inpu erminals as designaed according o he polariy of he erminals. A DC power supply can be conneced if is ripple facor is 20% or less and he mean volage is wihin he raed operaing volage range of he Timer. Make sure ha he volage is applied wihin he specified range, oherwise he inernal elemens of he Timer may be damaged. Connec he power supply volage hrough a relay or swich in such a way ha he volage reaches a fixed value a once or he Timer may no be rese or a imer error could resul. For he power supply of an inpu device of he -ML, use an isolaing ransformer, of which he primary and secondary windings are muually isolaed and he secondary winding is no grounded. Sar inpu Circui -ML Recifier circui A1 A2 supply Isolaion ransformer is required. Insallaion If he load curren is coninuously being supplied o he Timer for a long period of ime, be sure o provide he mouning clearance as shown in he figure below. If used under he condiions oher han hose specified below, he life of inernal componens may be shorened due o an excessive rise in he inernal emperaure. Swiching Curren vs. Ambien Temperaure (When Mouning Two or More Unis Side-by-Side) Ambien emperaure ( C) Mouning clearance: 50 mm min. Mouning clearance: 10 mm Mouning clearance: 5 mm Mouning clearance: 0 mm Load curren (A) (Measuremen Condiion: Inpu volage of 230 VAC) Maximum range of operaing ambien emperaure Inpu/Oupu Relaionship beween Inpu and Supply Circuis (-ML ) AC/DC power supply Inpu circui supply circui Since he inpu circui and he power supply circui are configured independenly, he inpu circui can be urned on or off irrespecive of he on/off sae of he power supply. I mus be noed ha a volage equivalen o he power supply volage is applied o he inpu circui. When connecing a relay or a ransisor as an exernal signal inpu device, pay aenion o he following poins o preven shor-circuiing due o a sneak curren o he ransformerless power supply. If a relay or ransisor is conneced o wo or more Timers, he inpu erminals of hose Timers mus be wired properly so ha hey will no be differen in phase or he erminals will be shor-circuied o one anoher (refer o he figures below). Conac or ransisor for exernal inpu signal A1 A2 A1 Incorrec -ML supply DIN rack Shor-circui curren A2 A1 -ML : Mouning clearance (mm) A2 15

13 Correc Conac or ransisor for exernal inpu signal Shor-circui curren A1 -ML A2 A1 -ML A2 supply The Series is provided wih a ransformerless power supply sysem. Inpu Wires The inpu wires mus be as shor as possible. If he floaing capaciy of wires exceeds 2,000 pf (approx. 17 m for cables wih 120 pf/m), he operaion will be affeced. Pay paricular aenion when using shielded cables. Precauions for EN Conformance The as a buil-in imer conforms o EN provided ha he following condiions are saisfied: The oupu secion of he is provided only wih basic isolaion. To ensure reinforced isolaion required by he EN , provide supplemenary basic isolaion on he load side conneced o he oupu. The iself is designed according o he following: Overvolage caegory III Polluion degree 2 On he above basis: Operaion pars on he fron and boom: Reinforced isolaion Wih clearance of 5.5 mm and creepage disance of 5.5 mm a 230 VAC Oupu: Basic isolaion Wih clearance of 3 mm and creepage disance of 3 mm a 230 VAC Environmen When using he Timer in an area wih excess elecronic noise, separae he Timer, wiring, and he equipmen which generaes he inpu signals as far as possible from he noise sources. I is also recommended o shield he inpu signal wiring o preven elecronic inerference. Organic solvens (such as pain hinner), as well as very acidic or basic soluions can damage he ouer casing of he Timer. Do no use he Timer in places where i is exposed o dus, corrosive gas, or direc sunligh. When soring he Timer, make sure ha he ambien emperaure and humidiy are wihin he raed values. Leave he Timer a room emperaure for a leas hree hours before using he Timer if i has been sored a an ambien emperaure of 10 C or below. Ohers If he Timer is mouned on a conrol board, dismoun he Timer from he conrol board or shor-circui he circuiry of he power board before carrying ou a volage wihsand es beween he elecric circuiry and non curren-carrying meal par of he Timer, in order o preven he inernal circuiry of he Timer from damage. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To conver millimeers ino inches, muliply by To conver grams ino ounces, muliply by Ca. No. L098-E1-1A OMRON Corporaion Indusrial Auomaion Company In he ineres of produc improvemen, specificaions are subjec o change wihou noice. Measuring and Supervisory Conrols Deparmen 28h Fl., Crysal Tower Bldg., , Shiromi, Chuo-ku, Osaka Japan Tel: (81) /Fax: (81) Prined in Japan M (0200) (O) 16

Solid-state Multi-functional Timer

Solid-state Multi-functional Timer Solid-sae Muli-funcional Timer Eigh operaing modes (H3DE-M) and four operaing modes (H3DE-S) cover a wide range of applicaions. Programmable conac enables he building of a self-holding relay circui (-