Grafik auf der Vorgabeseite in den Grafikrahmen importieren!

Transcription

1 Grafk auf der Vorgabesete n den Grafkrahmen mporteren! COMAND Operator s Manual Mercedes-Benz

2 Order-No. DamlerChrysler Blaupunkt Index E Parts-No US Edton E 07/03

3 COMAND Operator s Manual 230 Buchrücken (Versalhöhe zentrsch)

4 Welcome to COMAND! Please make yourself famlar wth your COMAND control unt and read the nstructons n ths manual before operatng the COMAND system. Ths wll help you derve a greater beneft from the system. Please also follow the nstructons and warnngs contaned n ths manual. Ignorng them could result n damage to the vehcle or personal njury to you or others. The astersk* dentfes optonal equpment. Dependng on model, verson and confguraton, your COMAND system equpment may dffer. Therefore, you may fnd explanatons for optonal equpment not nstalled n your vehcle. If you have any questons about the operaton of any equpment, your authorzed Mercedes- Benz Center wll be glad to demonstrate the proper procedures. We contnuously strve to mprove our product and ask for your understandng that we reserve the rght to make changes n desgn and equpment. Therefore, nformaton, llustratons and descrptons n ths manual mght dffer from the equpment nstalled n your vehcle. As such, the nformaton, llustratons and descrptons contaned n ths manual may not be reasonably reled upon n makng any clams wth respect to the actual performance of the product. These operatng nstructons form an ntegral part of the vehcle and should therefore always be kept nsde the vehcle and passed on to the new owner f the vehcle s sold. We extend our best wshes for many mles of safe, pleasurable drvng. Mercedes-Benz USA, LLC A DamlerChrysler Company

5

6 Contents Introducton Where to fnd t Symbols Operatng safety At a glance COMAND control unt Screen dsplays Multfuncton dsplay Quck reference COMAND Swtchng the COMAND control unt on and off Adjustng the volume Rado operaton CD operaton Satellte rado* operaton Telephone* operaton Enterng a destnaton and calculatng a route Selectng beeps Audo Rado operaton Quck reference Swtchng on Swtchng another system on Changng the Rado band Selectng a staton Memory functons Multfuncton dsplay CD operaton Quck reference General nformaton on CD operaton Menu overvew Swtchng on Swtchng another system on Track select Selectng a CD Fast forward/reverse CD track scan Namng a CD Playback mode Mutng CD playback Error messages Multfunctonal dsplay Sound settngs Adjustng sound settngs Satellte rado* Important notes Subscrbng to satellte rado Satellte rado operaton Quck reference Swtchng on Swtchng another system on Changng the program category Selectng a staton Memory functons Dsplayng track nformaton Dsplayng staton nformaton Dsplayng servce nformaton Sound settngs Multfuncton dsplay

7 Contents Telephone* Important notes Multfuncton dsplay Dsplay overvew Telephone operaton Quck reference Menu overvew Swtchng telephone operaton on. 96 Swtchng telephone operaton off. 97 Incomng call Outgong calls Notebook Edtng the phone book SMS functon Actvatng Readng SMS messages receved. 122 Emergency call Telephone s ready for operaton. 125 Servce numbers Callng a servce number Changng personal servce number Changng the number for Roadsde Assstance Navgaton Important notes Quck reference Changng the navgaton CD Destnaton nput Menu overvew Swtchng the navgaton system on Enterng destnaton address Contnung destnaton nput Selectng a destnaton va the map Enterng Ponts of Interest Selectng the last destnatons Calculatng a route Route gudance Route gudance prncples Requestng destnaton and route nformaton Begnnng route gudance Turnng onto a street Followng the course of the road. 173 Drvng through an ntersecton Changng to map dsplay Mx of map and symbol dsplay Alterng the map scale Selectng map orentaton Markng a way pont Selectng a detour Resettng functons Devatng from the calculated route

8 Contents Drvng on a non-dgtzed road Interruptng route gudance durng a journey Arrvng at destnaton Actvatng audo system Actvatng audo functons Cancelng route gudance Destnaton memory Retrevng a destnaton from the destnaton memory Savng the current destnaton Savng the current vehcle locaton Sortng destnaton memory Deletng a destnaton Settngs Enterng the vehcle locaton Calbraton Info Servces*/System settngs Info Servces* Requestng and dsplayng Info Servces System settngs Actvatng the man settngs menu 205 Adjustng the brghtness Actvatng settngs menu Selectng the language Settng date and tme Swtchng beep tones on and off. 215 Settng the dsplay dmmng characterstcs (day and nght dsplay) Resettng all settngs to the factory settngs Auxlary audo source Connectng Swtchng auxlary audo source on Swtchng auxlary audo source off Glossary Index

9 Contents

10 Where to fnd t Ths Operator s Manual s desgned to provde support nformaton for you, the COMAND operator. Each chapter has ts own gude color to provde fast access to nformaton. At a glance Here you wll fnd an overvew of all COMAND control elements and system components. If you are operatng COMAND for the frst tme or f you have rented or borrowed the vehcle, ths s the chapter you should read frst. Audo Here you wll fnd all the nformaton on how to use the rado, cassette player*, CDplayer, CD changer, and adjust the audo system settngs. Satellte rado* Ths chapter provdes nformaton on how to select a staton and a program category. Telephone* Here you can learn n detal about the many functons of the telephone, SMS, how to ntate an emergency call and use servce numbers. Navgaton Ths chapter provdes detaled nformaton on the followng topcs: Destnaton nput Route selecton and calculaton Route gudance ncludng detour Destnaton memory Introducton Where to fnd t Info Servces* and System settngs Ths chapter provdes nformaton on how to: Request and dsplay nfo servces such as news, weather, stocks and sports Adjust COMAND system settngs Drectores The glossary explans the most mportant techncal terms. The table of contents and ndex drectory wll help you quckly locate the nformaton you need. 1

11 Introducton Symbols Symbols You wll fnd the followng symbols n these operatng nstructons: * The astersk dentfes optonal equpment. Snce not all models have the same standard equpment, your COMAND system equpment may devate from some descrptons and llustratons. Warnng G Warnng notces draw your attenton to hazards that may endanger your health or lfe, or the health or lfe of others.! Hghlghts hazards that may result n damage to your COMAND. Helpful hnts or further nformaton you may fnd useful. Ths symbol ponts to nstructons for you to follow. A number of these symbols appearng n successon ndcates a multple-step procedure. The contnuaton symbol marks an nterrupted procedure whch wll be contnued on the next page. ( page 3) Ths symbol tells you where to look for further nformaton on ths subject. -> Ths symbol s used n the glossary. It ndcates that the term mmedately followng the symbol s also explaned n the glossary. Dsplay Words appearng n the multfuncton dsplay are prnted n the type shown here. 2

12 Operatng safety Warnng G Any alteratons made to electronc components and the software can cause malfunctons. The rado, amplfer, CD changer, navgaton module, satellte rado*, telephone* and Voce control system* are nterconnected. Therefore, when one of the components s not operatonal or has not been removed/ replaced properly, the functon of other components may be mpared. Ths condton mght serously mpar the operatng safety of your vehcle. We recommend that you have any servce work on electronc components carred out only by qualfed personnel. Warnng G In order to avod dstracton whch could lead to an accdent, the drver should enter system settngs wth the vehcle at a standstll and operate the system only when road and traffc condtons permt. Bear n mnd that at a speed of just 30 mph (approxmately 50 km/h), your car s coverng a dstance of 50 feet (approxmately 14 m) every second. COMAND supples you wth nformaton to help you select your route more easly and gude you convenently and safely to your destnaton. For safety reasons, we encourage the drver to stop the vehcle n a safe place before answerng or placng a call, or consultng the COMAND screen to read navgatonal maps, nstructons, or downloaded nformaton. Introducton Operatng safety Whle the navgaton system provdes drectonal assstance, the drver must reman focused on safe drvng behavor, ncludng attenton to traffc and street sgns, and should utlze the system s audo cues whle drvng. The navgaton system does not supply any nformaton on stop sgns, yeld sgns, traffc regulatons or traffc safety rules. Ths always remans your personal responsblty when you drve. CD maps do not cover all areas nor all routes wthn an area. 3

13 Introducton Operatng safety 4

14 At a glance COMAND control unt Multfuncton dsplay Quck reference COMAND 5

15 At a glance COMAND control unt COMAND control unt 6

16 At a glance COMAND control unt / Functon Page Functon Page Functon Page 1 Swtchng COMAND on and off 2 Swtchng the navgaton system on Quck reference 3 CD drve for an audo or a navgaton CD 4 Zoomng n for more detaled map 5 Zoomng out for less detaled map 6 Route gudance s actve: Swtchng between map and symbol dsplay or actvatng the map Route gudance s not actve: Actvatng the locaton map 7 Selectng a detour durng route gudance Requestng destnaton and route nformaton 9 Mutng of: a b c Audo source Voce output durng route gudance Settng the dsplay dmmng characterstcs (day and nght dsplay) Ejectng an audo or a navgaton CD Rado operaton: Selectng a staton Savng statons manually CD operaton: Selectng a track or CDs Telephone: Enterng the unlock code Enterng the telephone number , Navgaton (Destnaton nput): Selectng destnaton va 149 the map d Subsequent dalng Dsplayng a long lst entry n full n a wndow Removng a wndow e Subsequent dalng 102 f From wthn a system: Return to the prevous menu Telephone: Endng a call 99 7

17 At a glance COMAND control unt Functon Page Functon Page Functon Page g h General: Alterng or deletng entres CD operaton: Deletng a CD name Telephone: Alterng or deletng the unlock code or a telephone number Turn to hghlght a functon or a menu feld Press to start a functon or actvate a submenu j k l Turn to adjust the volume of Audo source Hands-free operaton of the telephone Voce output durng route gudance Press to repeat the current voce output Rado operaton: Automatc seek tunng Manual tunng CD operaton: Track select Fast forward/reverse Swtchng satellte rado operaton on Quck reference m n o p q Requestng and dsplayng Info Servces Adjustng system settngs Swtchng rado operaton on Quck reference Changng the rado band Swtchng CD operaton on Quck reference Swtchng telephone operaton on Quck reference Color screen, e.g. wth man rado menu

18 At a glance COMAND control unt Screen dsplays nclude: Screen dsplays Man system menus, e.g. the man rado menu Lsts for the selecton of entres, e.g. the cty lst ( page 20) Input menus, e.g. durng destnaton nput ( page 19) Selecton menus, e.g. durng route calculaton ( page 21) Symbol dsplay ( page 21) or map ( page 150) n navgaton Pop-up wndows ( page 189) Man menu structure 1 Man rado menu 3 P Status lne, dsplays actve system 2 Staton frequency and functon that has been swtched on 3 Menu felds to call further menus or functons 4 Symbol bar 2 4 Status lne and symbol bar Symbols Status lne FM1 AM, WB SAT, CD, TEL, NAV, SVC, SYS, AUX Symbol bar > M Meanng The rado s swtched on n FM Band; the current staton has been saved n memory locaton 1 n the FM preset menu AM or Weather Band WB The correspondng system s actve Recepton strength of the moble phone Incomng SMS message 1 1 f avalable from carrer 9

19 At a glance COMAND control unt The symbol bar appears n all system man menus. For symbol and map dsplays n navgaton: The symbol bar appears on the left hand sde of the dsplay and shows dfferent symbols. Pop-up screen messages Battery voltage gets low You can stll operate COMAND wthout the engne runnng.! To prevent the car battery from runnng down, you wll be recevng two messages askng you to start the engne when battery power gets low. You wll see the message Cauton. Please start engne. Otherwse COMAND wll shut down n 3 mnutes. Start the engne. You wll see the message Cauton. Please start engne. Otherwse COMAND wll shut down n 10 seconds. Start the engne. You wll see the message Cauton. COMAND wll shut down now. If you do not start the engne, you can contnue usng COMAND untl the next message appears. Start the engne. Transmttng an emergency call va Tele Ad* Refer to the vehcle operatng nstructons for nformaton regardng the operaton of the Tele Ad emergency call system and on how to transmt an emergency call. You wll see the message Tele Ad actve. Press the rght-hand rotary/pushbutton v to remove the wndow. COMAND wll mute an audo source or one of the two servce sources Voce output n navgaton or Voce control system*. 10

20 Multfuncton dsplay The starter swtch must be n poston 1 or 2. Refer to vehcle operatng nstructons. Functon 1 Left dsplay n speedometer 2 Rght dsplay n tachometer Operatng the control system 3 Adjustng the volume I lowers the volume J rases the volume 4 Makng a call K Accept ncomng call or starts dalng L End a call or end Tele Ad 5 Swtchng between menu systems E next system H prevous system At a glance Multfuncton dsplay You can operate the followng systems wth steerng wheel buttons 5 and 6: Rado Functon 6 Movng wthn a menu system F next dsplay G prevous dsplay CD (CD changer and CD drve) Auxlary audo source, e.g. tape recorder ( page 218) Telephone For more detaled nformaton, refer to Multfuncton dsplay n the chapters dscussng the rado, CD, and telephone operaton. 11

21 At a glance Quck reference COMAND Quck reference COMAND The secton Quck reference COMAND summarzes nformaton regardng the man functons of your COMAND system. You should read ths secton wth partcular care f you are operatng COMAND for the frst tme. For detaled nformaton, please refer to the pages ndcated and the respectve system chapters. Swtchng the COMAND control unt on and off Swtchng on P COMAND swtches on the last actve system and dsplays the correspondng menu. P Press #. The Mercedes logo and the letterng Mercedes-Benz wll appear. The dsplay then changes and an alert box wll appear. 12

22 At a glance Quck reference COMAND The navgaton system was the last system used The menu dsplayed wll vary accordng to the last navgaton functon used. If route gudance was actve: the symbol dsplay or the map If route gudance was actve and the COMAND was swtched off for more than 2hours: an nqury menu ( page 187) If destnaton nput was actve: If COMAND s swtched off for more than 30 mnutes durng actve route gudance, all manually entered traffc jams and detours are deleted. You wll see a correspondng message. Selectng a detour ( page 181). the man destnaton nput menu Swtchng another system on Press a system key, e.g. d. The man CD menu wll appear. Swtchng off Press #. The COMAND control unt wll swtch off. 13

23 At a glance Quck reference COMAND Adjustng the volume At the multfuncton steerng wheel To rase the volume Press J. To lower the volume Press I. At the COMAND operatng unt Turn the the left-hand rotary/pushbutton v. For the audo sources Rado CD (CD drve and CD changer) you can set the volume jontly. For the servce sources Voce output durng route gudance (navgaton system) and Voce control system* (refer to separate operatng nstructon) you can set the volume jontly. For the servce source Telephone you can alter the lstenng volume for the telephone only. Rado operaton P Swtchng on Press c. The rado s swtched on. The staton last tuned to wll begn to play. Changng the rado band Press c to swtch between FM-, AM- and WB-Band. 14

24 At a glance Quck reference COMAND Selectng a staton Automatc seek tunng Press g or h on the rocker swtch brefly. FM- and AM-Bands, Weather Band WB The rado wll tune n to the next recevable staton (FM/AM) or channel (WB) wth descendng/ascendng frequency. Swtchng another system on Press any system key, e.g. d. COMAND wll swtch to CD mode. You wll fnd more nformaton regardng ths topc n secton Rado operaton n chapter Audo ( page 28). CD operaton Swtchng on Press d. The man CD menu wll appear. Playback wll begn n CD drve wth the frst track on the CD P CD changer wth the frst track on the frst CD detected n the magazne. Loadng a CD nto the CD drve and loadng CDs n the CD changer ( page 45). Track select Press the rocker swtch g/h. You wll hear the prevous or next track. If more than 9 seconds of playng tme have elapsed, the CD changes back to the start of the current track. Selectng a CD Press one of the number keys Key 0 select the CD drve Keys 1-6 select the correspondng magazne slot of the CD changer The message Loadng CD... appears on the dsplay. Playback then wll begn wth track 1. 15

25 At a glance Quck reference COMAND CD track scan Press the rght-hand rotary/pushbutton v to confrm Scan. The tracks on the CD wll be played one after the other for 8 seconds each, Scan wll appear n red. Press the rght-hand rotary/pushbutton v agan to end the functon. Swtchng another system on Press any system key, e.g a. COMAND wll swtch to Telephone operaton. You wll fnd more nformaton n secton CD operaton n chapter Audo ( page 50). Swtchng on Satellte rado* operaton Press W to swtch to satellte rado operaton. You wll see the message Aqurng sgnal. Please wat.... After the COMAND acqures the sgnal, the man satellte rado menu wll appear. The staton last tuned wll begn to play. Selectng a staton Automatc tunng Press g or h on the rocker swtch brefly. The satellte rado wll tune n the prevous or next recevable staton n the selected category n alphabetcal order. Manual category scan Press g or h on the rocker swtch longer than 2 seconds. You wll hear a confrmaton beep when the functon s actve. Repeatedly press g or h agan wthn 5 seconds untl the desred category appears. Prevous category Press g. Next category Press h. 16

26 At a glance Quck reference COMAND The scan functon ends: automatcally after 6 seconds or When you use the number keys 1 through 0 or t, u. The frst staton (alphabetcal order) of the chosen category wll begn to play. You wll see the correspondng category and staton name. Swtchng another system on Press any system key, e.g c. COMAND wll swtch to normal rado operaton. You wll fnd more nformaton n chapter Satellte rado ( page 70). Telephone* operaton Swtchng on P Press a. The menu to enter the unlock code wll appear. Enterng the unlock code Use the number keys 1 through 0 to enter the unlock code. Astersks nstead of dgts wll appear n the nput lne. Press the rght-hand rotary/pushbutton v to confrm the entry. If entered code s correct and the phone s regstered n a network, the phone s ready for use. Outgong call Enter a telephone number Use the number keys 1 through 0 to enter the telephone number. The menu changes when the frst dgt s entered. 17

27 At a glance Quck reference COMAND Begn dalng When the Send button s hghlghted, press the rght-hand rotary/pushbutton v to confrm your nput. Dalng wll begn. If the phone number together wth a name s stored n the phone book, the name appears on the screen. Conductng a call When the call s answered, the call tme appears n the screen. Endng a call Press the rght-hand rotary/push-button v to confrm the End button. Swtchng another system on Press any system key, e.g. b. COMAND swtches to the navgaton system. You wll fnd more nformaton n chapter Telephone ( page 96). Enterng a destnaton and calculatng a route Swtchng the navgaton system on Man destnaton nput menu P Press b. If the navgaton system has not been booted up, the message Navgaton beng actvated. Please obey all traffc rules wll appear. The navgaton menu dsplayed wll vary accordng to the last navgaton functon used ( page 13). If route gudance was swtched off, the man destnaton nput menu wll be dsplayed. 18

28 At a glance Quck reference COMAND Enterng destnaton address P Press the rght-hand rotary/pushbutton v n the man destnaton nput menu and confrm Address.... The man address menu wll appear. The entry behnd Cty... s ether empty or the cty you last entered wll appear. Cty/Suburb Entry nput menu P Press the rght-hand rotary/push-button v n the man address menu and confrm Cty.... The Cty/Suburb Entry nput menu wll appear. Adoptng the cty last selected Press the rght-hand rotary/pushbutton v longer than 2 seconds. Enterng a cty Turn the rght-hand rotary/pushbutton v to hghlght the frst letter and press to confrm. Enter other characters untl the desred cty appears n the nput lne. Correctng entry Last character Press r brefly. Complete entry Press r longer than 2 seconds. Actvatng the cty lst Press the rght-hand rotary/pushbutton v longer than 2 seconds untl the cty lst appears. 19

29 At a glance Quck reference COMAND Cty lst P Press the rght-hand rotary/pushbutton v agan to confrm the cty. A selecton menu wll appear. If several optons of a cty/suburb are avalable, another menu wll appear where you must make and confrm your desred selecton. Press the rght-hand rotary/pushbutton v to confrm Street. The nput menu Street Entry wll appear. The further sequence corresponds to the Enterng a cty secton. P Now enter the street and actvate the street lst. Then confrm the street n ths lst. You have now selected the destnaton and can calculate the route. Press the rght-hand rotary/pushbutton v to confrm OK. The Route Mode selecton menu wll appear. 20

30 At a glance Quck reference COMAND Route mode selecton menu Select a route and then a traffc route P P Turn the rght-hand rotary/pushbutton v to move the cursor on the entry you want and press to confrm. A checkmark appears P. Route types avalable: Fast Route Short Route Includng P/avodng traffc routes Q Freeway Ferry Toll Press the rght-hand rotary/pushbutton v to confrm OK. The selected route and the destnaton you have entered wll appear on the dsplay. You wll hear the message The route s beng calculated. Symbol dsplay P After a few seconds, you wll see the symbol dsplay. CALC. ROUTE Calculaton of route 2.9 mles Dstance to destnaton (as the crow fles) 21

31 At a glance Quck reference COMAND P The route wll be calculated. COMAND dentfes the road you are travellng on. You wll see the arrow ndcatng the drecton of travel f COMAND recognzes the road you are travellng on. You wll e.g. hear the message Please turn rght. Route gudance wll begn. You wll fnd more nformaton n chapter Navgaton ( page 161). Day and nght dsplay, swtchng off screen Press Ä repeatedly untl the desred dsplay appears. The dsplay changes n ths order: Day dsplay Nght dsplay Screen off Day dsplay It s also possble to carry out the change between day and nght dsplay automatcally va the ambent lght sensor ( page 216). You can swtch dfferent beeps on and off. Selectng beeps Acknowledgement beep Beeps when you accept an entry or enter a destnaton on the map Info beep Beeps when you see the messages announcng a drop of battery voltage ( page 10) Alarm beep Beeps f the devce has a serous malfuncton or f you are lstenng to an emergency broadcast on the rado. You can only swtch off the beep f you also swtch off COMAND. You wll fnd more nformaton n chapter System settngs ( page 215). 22

32 Audo Rado operaton CD operaton Sound settngs 23

33 Audo Rado operaton Rado operaton Quck reference 24

34 Audo Rado operaton Functon 1 Swtchng COMAND on and off 2 Mutng the rado audo (mutng on/off) 3 Selectng a staton va number keypad (presets) Selectng a staton va drect frequency entry Savng a staton Selectng a staton from the preset menu FM/AM Selectng a staton from the WB preset menu 4 Actvatng the nput mode for staton frequency n the man rado menu n the presets 5 Return to prevous menu Page Functon Page 6 Turn to hghlght a functon or a menu feld Press to perform a functon or access a submenu 7 Adjustng the volume 14 8 Automatc seek tunng ascendng/descendng Manual tunng ascendng/descendng Requestng and dsplayng Info Servces Adjustng system settngs a Swtchng to rado operaton 28 b Color screen wth man rado menu 25

35 Audo Rado operaton Menu overvew P

36 Audo Rado operaton Functon 1 Man rado menu FM Page 2 Current frequency band (FM) and memory preset selected (e.g. 1) 3 Current frequency 4 Symbol ndcates stereo recepton 5 Menu felds 6 Man sound menu Sound settngs 63 7 Man Weather Band WB 29 menu 8 Auto preset Saves 10 statons automatcally Select a staton Functon 9 Preset menu Save a staton automatcally FM, AM Select a staton Page

37 Audo Rado operaton In chapter Audo you wll fnd detaled nformaton regardng rado operaton CD operaton and sound adjustments If you have not done so already, please famlarze yourself wth these functons by readng chapter At a glance. Man rado menu FM 1 Frequency band (FM, AM, WB) and memory locaton of staton, e.g. 1 2 Staton frequency 3 Symbol bar Swtchng on 1 Press c to swtch to rado operaton. The staton last tuned to wll begn to play. 3 2 P Mutng You can operate the telephone and the navgaton system whle the rado s on. Press Ö whle lstenng to the rado. The symbol R wll appear n the symbol bar. Press Ö agan to resume lstenng to the current staton. The symbol R wll have dsappeared. Mutng wll also be canceled f you swtch to a dfferent audo source, e.g. CD, or f you alter the volume. Swtchng another system on Press any system key, e.g. d. COMAND wll swtch to CD mode. 28

38 Audo Rado operaton Changng the Rado band You can select between FM-, AM- and WB- Band. AM Band Frequency band FM AM Weather Band WB Frequency range FM AM If a weather band staton cannot be receved on ths channel, an automatc search run of all 7 channels wll take place. As soon as a weather band staton s receved, the search stops and the channel appears n the dsplay. The automatc search wll perform two cycles through the 7 channels. Message No WB A weather band staton cannot be receved on any of the 7 channels. Swtchng back to FM band Press c. P Press c untl AM s dsplayed n the upper left hand corner of the dsplay. The AM staton last tuned to wll begn to play. The frequency wll appear n the dsplay. P In the AM or FM man rado menu, turn the rght-hand rotary/push-button v to hghlght WB and press to confrm. The channel last tuned to wll appear n the dsplay. The staton last tuned to wll begn to play. 29

39 Audo Rado operaton You can use the followng functons: Automatc seek tunng ( page 30) Seek tunng at the multfuncton steerng wheel ( page 31) Manual tunng ( page 31) Staton selecton va number keypad (presets) ( page 32) Staton selecton va drect frequency entry ( page 32) Automatc staton scan ( page 33) Selectng a staton Staton selecton from the preset menu ( page 38) Automatc seek tunng P Press g or h on the rocker swtch brefly. FM- and AM-Bands, Weather Band WB The rado wll tune n to the next recevable staton (FM, AM) or channel (WB) wth descendng/ascendng frequency dependng on the drecton of seek. WB Alternatvely, you can select the channel drectly: Press a number key 1 through 7. 30

40 Audo Rado operaton Seek tunng at the multfuncton steerng wheel If the multfunctonal dsplay shows the staton frequency, then: Press F or G to select a hgher/ lower frequency preset. The up/down arrows have dfferent functons dependng on whch mode the seek functon n the multfuncton dsplay s programmed to. The two avalable optons are Memory Scan or Frequency Scan (Staton search). Refer to the vehcle operator s manual on how to program ths opton. Manual tunng (FM, AM) P Press g or h on the rocker swtch longer than 2 seconds. The menu felds wll appear n lght grey letterng. FM Band The frequency dsplayed wll change n ncrements of 0.2 MHz. AM Band Tunng wll take place n ncrements of 10 khz. Actvatng the AM Band ( page 29). 31

41 Audo Rado operaton Staton selecton va number keypad (presets) FM- and AM-Bands F FM and AM presets are ndependent and can only be accessed whle n the correspondng band. Staton selecton va drect frequency entry (FM, AM) Savng statons for FM and AM ( page 34). 1 Weather Band WB Tune the rado to the selected channel. The memory preset number wll appear n the status lne. P Press one of the number keys, such as 2 brefly. The rado wll tune to the frequency assgned to that memory locaton. If none has been set by you, the rado wll not change the staton. The XX Presets (XX = FM, AM or WB) menu feld provdes an overvew of whch statons have been allocated to whch memory presets ( page 35). 1 Input lne Press t. Input lne 1 wll appear n the man rado menu. P Enter the desred frequency wth the number keys wthn 8 seconds, e.g for FM. The staton you have selected wll begn to play. 32

42 Audo Rado operaton If you do not make another entry wthn 8 seconds, the functon wll be canceled and you wll lsten to the staton last tuned to. Frequency band FM AM Frequency range FM AM If you enter a frequency that s outsde the allowable nput range, the message Invald nput appears. Enter a vald frequency. Automatc staton scan The statons on same band (FM/AM/WB) can be scanned one after the other for 8 seconds each. 1 Scan functon s actve 1 P Press the rght-hand rotary/pushbutton v and confrm Scan. The scan functon wll begn, Scan wll appear n red letterng. Weather Band WB The ndvdual weather statons stored n the memory on 7 channels wll be scanned one after the other. The scan functon stops automatcally when the frst staton receved has been scanned twce. End scan functon and play a staton Press the rght-hand rotary/pushbutton v agan f you hear the desred staton. The staton selected wll appear wth the staton frequency. Scan wll appear n black letterng agan. 33

43 Audo Rado operaton You can use the followng functons: Memory functons Savng statons manually FM Savng statons manually AM ( page 36) Savng statons automatcally FM, AM ( page 36) Selectng a staton from the FM/AM preset menu ( page 38) Selectng channels from the WB preset menu ( page 38) Selectng a staton by enterng the statons frequency n the FM/AM presets ( page 39) Savng statons manually (FM) In the man rado menu P Press one of the number keys, e.g. 3, longer than 2 seconds. You wll hear a confrmaton beep f the beep tones opton was actvated n the system settngs ( page 215). The rado saves the current staton at the memory preset selected. The memory preset selected wll appear n the status lne, e.g. FM3. There are 10 presets avalable (1-9, 0). An exstng entry s overwrtten n the memory lst when a new nput s gven. 34

44 Audo Rado operaton On the memory lst 5 1 Preset of the staton currently selected 2 Frequency of the staton currently selected 3 Current frequency appears n red letterng 4 Memory preset allocated 5 Memory preset avalable P Turn the rght-hand rotary/push-button v to hghlght FM Presets n the man rado menu and press to confrm. The FM preset memory wll appear. Turn the rght-hand rotary/push-button v to hghlght the desred memory preset. Press the rght-hand rotary/pushbutton v or correspondng number key longer than 2 seconds. The current staton wll be saved at the memory preset selected. You wll see the man rado menu automatcally after 8 seconds f you press *. There are 2 presets for each of the FM and AM waveband, standard FM/AM presets (savng statons manually) and Auto presets (savng statons automatcally). The standard FM/AM presets are not affected by the Auto presets. Ths s a second opton for storng a staton range you are currently recevng. 35

45 Audo Rado operaton Savng statons manually (AM) On the memory lst Savng statons automatcally (FM, AM) 1 P Actvate the AM Band ( page 29). Save a staton n the same way as descrbed for the FM Band ( page 34) P Press the rght-hand rotary/pushbutton v to confrm AM Presets. The AM preset memory wll appear. P Functon s actve If the FM/AM man rado menu s dsplayed n the AM man rado menu on the memory lst The standard AM presets are not affected by the Auto presets. Ths s a second opton for storng a staton range you are currently recevng. Turn the rght-hand rotary/push-button v to hghlght Auto Presets and press the button longer than 2 seconds. Message 1 wll appear. 36

46 Audo Rado operaton Select other staton Turn the rght-hand rotary/push-button v to hghlght the memory poston and press to confrm. The man rado menu appears. automatcally after 8 seconds f you press *. Weather Band P The rado stores the 10 strongest statons. The staton frequences avalable wll appear n the memory lst. Actvate the Weather Band WB. P Turn the rght-hand rotary/push-button v to hghlght WB Presets and press to confrm. The WB Presets wll appear. Channels 1 to 7 are lsted n the memory. The memory poston of the channels are fxed and cannot be altered. 37

47 Audo Rado operaton Selectng a staton from the preset menu (FM, AM) Actvate the FM or AM memory ( page 35). P You can use one of the followng two ways to select a staton from the FM/AM presets Press the correspondng number key (e.g. 3) to select the desred staton. Turn the rght-hand rotary/push-button v to hghlght a memory preset n the FM/AM preset lst and press brefly to confrm. In both cases, the man rado menu wll then appear automatcally after 8 seconds, ndcatng the memory preset number. Selectng a channel from the WB preset menu Actvate the WB Presets ( page 37). P Use one of the two ways to select a channel from the WB presets as descrbed on the left. The man WB menu wll then appear automatcally after 8 seconds, ndcatng the memory preset number. 38

48 Audo Rado operaton Selectng a staton by enterng the staton frequency n the presets (FM/AM) The staton frequency can be entered n FM and AM Bands n the correspondng presets lst. 1 For both FM/AM Bands Press t. An nput lne 1 wll appear on the top lne n place of the current staton name. Use the number keys to enter the frequency. The frequency s entered nto 1 begnnng from the rght. After 8 seconds at the most, the staton selected wll begn to play. If you enter a frequency whch s not wthn the gven range, the message Invald nput wll appear. Enter a vald frequency. 1 Input lne P Frequency band FM AM Frequency range FM AM 39

49 Audo Rado operaton Multfuncton dsplay P No audo source has been swtched on 2 The rado s swtched on 3 Frequency band and the memory preset, f applcable 4 Frequency of the staton selected 5 SP (memory) - appears f Memory nstead of Staton search or Freq. (dependng on model) has been selected n the Vehcle submenu. Refer to Control system n chapter Controls n detal n your vehcle's operatng nstructons for further nformaton. Press # at the COMAND control unt to swtch on COMAND. Press c at the COMAND control unt to swtch to rado operaton. Repeatedly press key E or H at the multfuncton steerng wheel untl dsplay 2 appears. 40

50 Audo Rado operaton Repeatedly press F or G at the multfuncton steerng wheel untl the desred staton frequency appears. Press E or H at the multfuncton steerng wheel to dsplay the next or prevous system. 41

51 Audo CD operaton CD operaton Quck reference r 42

52 Audo CD operaton Functon Page Functon Page Functon Page CD drve n the control unt and CD changer operaton 1 Swtchng COMAND on and off 2 CD drve for audo CD or navgaton CD 3 Mutng CD playback (mutng on/off) 4 Ejectng an audo CD or a navgaton CD 5 Selectng a CD Selectng a track Track selecton wth the number keypad 7 Return to prevous menu 8 Press brefly: Deletes the character that has been entered last Press longer than 2 seconds: Deletes a complete name 9 Turn to hghlght a functon or a menu feld Press to perform a functon or actvate a submenu a b c Turn to the rght: Rases the volume Turn to the left: Lowers the volume Press brefly: Prevous track or start of the track (dependng on playback tme)/next track Press longer than 2 seconds: Fast forward/fast reverse Requestng and dsplayng Info Servces Adjustng system settngs d Swtchng on CD operaton (CD drve, CD changer) 50 e Color screen wth man CD menu 43

53 Audo CD operaton General nformaton on CD operaton Warnng G The CD drve and CD changer are Class 1 laser products. There s a danger of nvsble laser radaton when you open or damage the cover. Do not remove the cover. The CD drve and the CD changer do not contan any parts whch can be servced by the user. For safety reasons, have any necessary servce work performed by qualfed personnel. Only use CDs, whch bear the label shown and that conform to the compact standard (IEC 60908). You can therefore only use CDs wth a maxmum thckness of 1.3 mm.! Use only CDs wth a dameter of 12 cm, do not use 8-cm CDs. An 8-cm CD adapter may cause damage to the CD changer and should not be used. CD playback locatons are Your CD drve has been desgned to play CDs whch correspond to the EN standard. If you nsert thcker data carrers, e.g. ones that have data on both sdes (one sde wth DVD data, the other sde wth audo data), they cannot be ejected and wll damage the drve. the CD drve n the COMAND operatng unt You can play audo CDs or read data from the navgaton CD. the CD changer wth 6 magazne slots. The status lne n the man CD menu ( page 50) ndcates whch component s beng used for CD playback. 44

54 Audo CD operaton Tps on carng for your CDs Only touch the CD on the sdes. Avod touchng the CD surface wth your fngers. Clean the CD wth a dry, lnt-free cloth. Wpe them from the nsde to the outer edge. Never wpe the CD n a crcular moton. Do not use rubbng alcohol or solvents to clean the CDs. Do not expose the CDs to heat or drect sunlght. Do not wrte or put stckers on CD. You can name a CD ( page 55). Ths name then wll appear on the dsplay durng CD playback. Loadng a CD nto the CD drve NAV CD SYS OL-RPT + 1 Eject button 2 CD drve - MAP 2 U L B E S T O F S O 1 4 GHI PQRS + 2 ABC 5 JKL 8 TUV 3 DEF 6 MNO 7 9 DEL 1 0 WXYZ RET P Press 1 to eject any CD f necessary. Insert a CD as llustrated wth the label facng up nto 2 untl t s automatcally pulled n. Changng the navgaton CD ( page 137)! After the navgaton CD has been changed, the message Program s beng loaded. Please wat. and a progress ndcator are dsplayed. Ths ndcates that COMAND s currently loadng the program stored on the navgaton CD. Do not nterrupt the loadng process. Do not eject the navgaton CD untl the loadng process has been completed. 45

55 Audo CD operaton Loadng CDs n the changer The CD changer s located n the rear storage compartment behnd the drver s seat. It can accomodate up to 6 CDs. Press the green eject button. P P Pull the dsk tray forward untl t stops. P Open the sldng door by pushng n the drecton of the arrow above. Push the door completely open untl t locks n the open poston. The magazne wll slde upwards. You can also slde out the magazne f COMAND s swtched off. However, the eject button wll not functon f the battery s not connected or draned. Do not attempt to remove the tray from the magazne. 46

56 Audo CD operaton P P P Place a CD n the tray. The CD should be nserted wth the label sde up. 1 Arrow tp on the rack wall Push the CD tray nto the magazne completely. Slde the magazne nto the CD changer untl t clcks nto place (lsten for the clck). Press the button 3 to close the magazne compartment. Make sure that 1 s pontng n the drecton of the arrow 2. 47

57 Audo CD operaton Menu overvew P

58 Audo CD operaton Functon Page 1 Man CD menu 50 2 Status lne CD 0: The CD drve s n operaton CD 1-6: The CD changer s n operaton 3 Man sound menu Sound settngs 63 4 CD Namng menu Namng a CD 55 5 Settngs menu Selectng the playback 58 mode 6 CD Select menu Selectng a CD Track select

59 Audo CD operaton Swtchng on 1 Man CD menu 3 1 CD functon wth the number of the magazne slot currently playng 2 Track number and elapsed playback tme wll appear. Also, the name of the CD wll appear here, see Namng a CD ( page 55) 3 Scan functon and menu felds 2 P Press d. The man CD menu wll appear. Playback begns f a CD was nserted n one of the playback locatons. Playback locatons are CD 0 CD drve CD 1 - CD 6 magazne slot 1 to 6 n the CD changer CD drve Playback wll begn wth the frst track on the CD. CD changer The CD changer searches for nserted CDs n magazne slots 1 to 6 and plays the frst track on the frst CD detected. If you swtch on CD mode, COMAND wll check whch playback unt (CD drve or CD changer) was used last. If there s no CD n one of the unts, COMAND automatcally swtches to the unt wth CD. After the magazne was changed The message Loadng CD... appears f the CD changer was used last. Error messages ( page 60). Swtchng another system on Press any system key, e.g. c. COMAND wll swtch to rado operaton. 50

60 Audo CD operaton Track select Wth the rocker swtch g/h Next track Press h brefly. Prevous track or start of ttle (f more than 9 seconds of playng tme has elapsed) Press g brefly. Select any desred track Press g/h as often as necessary. Wth the number keypad P You can select a track wth the rocker swtch g/h wth the number keypad n the CD Select menu P Press t and enter the number of the track you wsh to select, e.g. 2. If you enter a two-dgt number, you must enter the second number wthn 3 seconds. Otherwse the system wll swtch to the track of the frst number entered. 51

61 Audo CD operaton You wll hear the selected track automatcally after 3 seconds f you press t. The new track number wll appear n the man CD menu. In the CD Select menu Press t and the number key for the track you wsh to select, e.g. 2. You wll hear the track you have chosen automatcally after 3 seconds f you press t. The man CD menu wth the new track number wll appear. P Turn the rght-hand rotary/push-button v to hghlght CD Select n the man CD menu and press to confrm. The CD Select menu wll appear. 52

62 Audo CD operaton Selectng a CD Wth the number keypad In the CD Select menu Press a number key, e.g. 2 to select the correspondng CD. The message Loadng CD... wll appear f the selected magazne slot s loaded. Key 0 CD drve Keys 1-6 magazne slots 1 to 6 of the CD changer No CD has been nserted: You can select a CD wth the number keypad n the CD Select menu P COMAND wll show the messages CD drve: No CD or CD changer: No CD. If t s not possble to play a CD selected from the CD drve (message: Error ), COMAND wll automatcally load the next CD n the magazne. Other error messages ( page 60). P Current track and the name of the CD playng f ths was entered prevously ( page 55) 2 Current CD n red color 3 Magazne slots contans a CD Poston 0: CD drve Poston 1-6: magazne slots n the CD changer 4 Magazne slot does not contan a CD 53

63 Audo CD operaton Turn the rght-hand rotary/push-button v to hghlght CD Select n the man CD menu and press to confrm. The CD Select menu wll appear. Turn the rght-hand rotary/push-button v to hghlght the desred CD and press to confrm. The message Loadng CD... wll appear n 1. Playback wll then begn wth track 1, the man CD menu wll appear. Fast forward/reverse Fast reverse Press g longer than 2 seconds and keep t depressed. The message T Reverse wll appear. Endng the functon Release g or h. Playback wll resume. If magazne slots are empty, t s not possble to select them wth the rghthand rotary/push-button v. If you select an empty magazne slot wth a number key, e.g. 4 the message No CD s dsplayed. Fast forward P Press h longer than 2 seconds and keep t depressed. The message Forward S wll appear. The dsplay shows the current poston va the tme ndcator dsplay. 54

64 Audo CD operaton CD track scan The tracks on a CD can be scanned one after the other for 8 seconds each. Use one of these ways to swtch off the functon Press the rght-hand rotary/pushbutton v agan. Press g or h. The functon wll swtch off automatcally when the startng track s reached. Namng a CD Playback wll resume wth the desred track. 4 P Press the rght-hand rotary/pushbutton v to actvate Scan functon. Scan wll begn and Scan wll appear n red. For the CD changer, t s also possble to scan all of the CDs n the magazne slots 1-6 for 8 seconds each (always track 1). Actvate the functon CDs Scan n the settngs menu ( page 58). P Input lne 2 Character set (letters, dgts, specal characters) 3 Character selected appears magnfed, magnfed M s startng pont 4 Delete Names functon 55

65 Audo CD operaton Namng the CDs nserted n the CD changer or CD drve Turn the rght-hand rotary/push-button v to hghlght CD Namng n the man CD menu and press to confrm. The CD Namng menu wll appear. Turn the rght-hand rotary/push-button v to hghlght the desred character and press to confrm. The character s entered n 1. Repeat the last step to enter addtonal characters. Deletng the character that has been entered last Press r brefly. The nput marker moves to the left as t deletes. Deletng a complete name Press r longer than 2 seconds. Alterng an entered name Delete one character at a tme or the entre name. P Then enter the new name. Press the rght-hand rotary/pushbutton v longer than 2 seconds. The name of the CD currently playng wll appear n the man CD menu above the track number. The CD wll retan ths name even f you later nsert t n a dfferent magazne slot. 56

66 Audo CD operaton The CD names are stored n the names lst n alphabetcal order. If the name memory s full, the followng message wll appear: Attenton, name memory s full. New entry only possble after deletng old one. Confrm the message by confrmng OK. The nput menu wll appear agan. Use the Delete Names functon to delete names from the memory. Deletng a CD name P Turn the rght-hand rotary/push-button v to hghlght Delete Names n the man CD menu and press to confrm. The lst of CD names wll appear. Turn the rght-hand rotary/push-button v to hghlght the name you wsh to delete and press to confrm. The name s deleted, the followng entry wll then move up one poston. Press the rght-hand rotary/pushbutton v longer than 2 seconds to return to the man CD menu. Pagng backward/forward n the name memory (f the : and ; symbols are shown) Turn the rght-hand rotary/push-button v to hghlght the : or ; symbol and press to confrm. 57

67 Audo CD operaton Playback mode 1 Current playback mode 2 up to 4 functons can be selected for the CD changer only P Playback mode actve Q Playback mode s not actve You can only select one playback mode at a tme P Turn the rght-hand rotary/push-button v to hghlght Settngs and press to confrm. The CD Settngs menu wll appear. Actvatng playback mode Turn the rght-hand rotary/push-button v to hghlght the desred functon and press to confrm. Playback mode s actve P. Standard Ths functon s automatcally actve when another CD has been selected. CD playback begns n ascendng order. Magazne Mx (CD changer only) Select ths functon to play all of the tracks of all of the CDs n the magazne slots 1-6 n random order. When CDs are played n random order, t s possble that several tracks from the same CD are played n a row. Magazne Mx appears n the man CD menu. Track Repeat Select ths functon to repeat the current track untl you swtch the functon off. Track Repeat appears n the man CD menu. Track-Mx Select ths functon to play the tracks on the CD currently selected n random order. Track-Mx appears n the man CD menu. CD Repeat (CD changer only) Select ths functon to repeat the current CD untl you swtch the functon off. CD Repeat appears n the man CD menu. 58

68 Audo CD operaton CDs Scan (CD changer only) Select ths functon to scan all of the CDs n the magazne slots 1-6 for 8 seconds each (track 1). Ths functon wll begn wth the CD followng the CD currently playng. Scan functon wll end automatcally after all CDs have been scanned Swtchng off playback mode Turn the rght-hand rotary/push-button v to hghlght the current playback mode and press to confrm. The checkmark dsappears. Playback automatcally changes to Standard P. Return to the man CD menu f you press g/h. P Press *. The playback mode selected appears n the man CD menu below the track number, e.g. Magazne Mx. 59

69 Audo CD operaton Mutng CD playback Press Ö whle a CD s beng played. CD operaton s muted, the symbol R wll appear n the symbol bar. Press Ö once agan f you wsh to contnue playback. The symbol R s faded out of the symbol bar. COMAND also cancels mutng, f you select a dfferent audo source, e.g. rado alter the volume press g/h. 1 CD changer error messages 2 CD drve error messages No CD changer COMAND s unable to actvate the CD changer. Error messages 2 1 P If necessary, contact an authorzed Mercedes-Benz Center. No Magazne There s no magazne nserted n the CD changer. Load CDs nto the magazne and nsert t nto the CD changer. CD Magazne empty There are no CDs n the magazne. Load CDs nto the magazne and nsert t nto the CD changer. No CD CD changer There s no CD n the magazne slot selected. Select another magazne slot. CD drve No CD s n the CD drve or the CD n the drve s not ready to play. 60

70 Audo CD operaton Beng actvated The CD changer s not yet ready for operaton. Readng error The CD that has been nserted cannot be read. Temperature s too hgh CD operaton wll swtch off automatcally after 3 seconds. Press the correspondng key to select a dfferent audo source. Error Another error has occurred. If an error occurs n the operaton of the CD drve or CD changer, COMAND automatcally swtches to the other devce after 3 seconds. If t s not possble to play the CD selected n the CD changer, the system wll automatcally select the next CD n the magazne. 61

71 Audo CD operaton Multfunctonal dsplay P No audo source has been swtched on 2 CD unt s swtched on 3 If the CD changer s swtched on, the number of the CD currently playng appears 4 Track number Press d on COMAND. CD unt s swtched on. Press E or H repeatedly untl dsplay 2 appears. Press F or G untl the desred track number 4 appears. Press E or H to dsplay the next or prevous system. 62

72 Sound settngs Adjustng sound settngs COMAND s equpped wth a standard amplfer. You can set the sound Bass/Treble ndvdually the sound-center select predefned sound optmzaton. See ndvdual audo mode descrptons for nstructons on ths feature. Adjustments to the sound have a dfferent effect on the audo and servce sources. The predefned sound optmzatons are avalable for the audo sources only. Audo sources nclude: Rado FM, AM, WB CD (CD drve, CD changer) Satellte rado* auxlary audo source, e.g. tape deck (f connected) You can actvate the man Sound menu n the audo sources through the menu feld Sound. Servce sources nclude: Telephone* Voce output n the navgaton Voce control system* See separate operatng nstructons for telephone and voce recognton system. You can actvate the man Sound menu n the NAVI Settngs menu ( page 199), through the menu feld Sound. Audo Sound settngs Actvatng the man sound menu For audo sources Man sound menu 1 Rado (FM) s swtched on 2 Actual sound settngs (Bass/Treble) 3 Actual sound-center (Balance) 4 Slder swtch to alter the value 5 Resets Bass/Treble to 0, and the Balance to the mddle of the vehcle 6 Actvates predefned sound optmzatons 63

73 Audo Sound settngs Turn the rght-hand rotary/push-button v to hghlght Sound n the man menu for rado or CD operaton and press to confrm. For servce sources Turn the rght-hand rotary/push-button v to hghlght Settngs n the man destnaton nput menu ( page 140) and press to confrm. The man sound menu wll appear dsplayng the actual settngs. The NAVI Settngs menu wll appear ( page 199). It s also possble that AM Bass/Treble, WB Bass/Treble, CD Bass/Treble, SAT Sound or AUX Bass/Treble are ndcated n 1. 1 Turn the rght-hand rotary/push-button v to hghlght Sound and press to confrm. The Speech Bass/Treble menu wll appear. Balance defnes sound-center left/ rght P Volume dfference Set the dfference between voce output durng route gudance and an actve audo source 0 The volume of the audo source s not affected durng voce output. 10 The audo source s set very low durng voce output. No predefned sound optmzatons are avalable for servce sources. Durng adjustment n the Speech Bass/Treble menu, COMAND wll ssue a repettve voce output of Sample to allow you to set the settngs as you prefer. 64

74 Audo Sound settngs Settng Bass/Treble/Balance 1 The sound-center adjustments affect the settngs for the rado (FM/AM/WB) and CD operaton. Adjustments whch are made to the navgaton system wll affect the voce control system and the telephone. Reset the Settngs to 0 1 Settng mode actve P Turn the rght-hand rotary/push-button v to move the cursor to the parameter you want to adjust and press to confrm. The settng mode s actve. The actvated sound parameter s shown n red. P Turn the rght-hand rotary/push-button v to set the desred value. Press the button. The value s set. The sound feature s shown n black. Turn the rght-hand rotary/push-button v to hghlght Reset and press to confrm. COMAND sets treble and bass to 0 and sets the sound-center nto the mddle of the vehcle. Return to the man audo menu Press *. 65

75 Audo Sound settngs Actvatng sound optmzaton Return to the man sound menu Turn the rght-hand rotary/push-button v to hghlght Bass/Treble and press to confrm. Return to the man audo menu Press *. Avalable sound optmzatons Standard - COMAND set the sound lnear for the center of the vehcle P Turn the rght-hand rotary/push-button v to hghlght Other Optons n the man sound settngs menu and press to confrm. The Other Optons (FM/AM, WB or CD) menu wll appear. P - actual sound optmzaton P Turn the rght-hand rotary/pushbutton v to hghlght the desred sound optmzaton and press to confrm. The new sound optmzaton s actve P. You can only select one sound optmzaton at a tme. Speech - the emphass s on the spoken word Drver-optmzed - COMAND optmzes the sound for the drver s seat poston Ambence Small, medum and large rooms are smulated COMAND does not offer sound optmzaton for the servce sources. 66

76 Satellte rado* Important notes Satellte rado operaton Multfuncton dsplay 67

77 Satellte rado* Important notes Important notes In chapter Satellte rado, you wll fnd detaled nformaton regardng selectng a staton and a program category memory functons sound adjustments If you have not done so already, please famlarze yourself wth these functons by readng chapter At a glance. Addtonal optonal satellte rado equpment and a subscrpton to satellte rado servce provder are requred for the satellte rado operaton descrbed here. Feature descrpton s based on prelmnary nformaton avalable at tme of prntng. At tme of prntng, no date for the avalablty of optonal equpment requred for satellte rado operaton had been set. Contact your authorzed Mercedes-Benz Center for detals and avalablty for your vehcle. Note that categores and channels shown n llustratons are dependent on programmng content delvered by the servce provder. Programmng content s subject to change. Therefore, channel and categores shown n llustratons and descrptons contaned n ths manual may dffer from the channels and categores delvered by the servce provder. Satellte rado servce may be unavalable or nterrupted from tme to tme for a varety of reasons, such as envronmental or topographc condtons and other thngs we can t control. Servce mght also not be avalable n certan places (e.g., n tunnels, parkng garages, or wthn or next to buldngs) or near other technologes. Srus Satellte Rado provdes approxmately 100 channels, so called streams, of dgtal-qualty rado, among others musc, sports, news, and entertanment commercal-free. Srus Satellte Rado uses a fleet of hgh-power satelltes to broadcast 24 hours per day, coast-to-coast. Ths dverse, satellte-delvered programmng s avalable for a monthly subscrpton fee. For more nformaton, call the Srus Servce Center ( page 69) or contact 68

78 Satellte rado* Important notes Subscrbng to satellte rado Servce nformaton dsplay 1 Phone number of the provder, (SIRIUS) or Call Servce Provder 2 The number of your SAT tuner Press W to swtch to satellte rado operaton. The Servce nformaton dsplay wll appear f the satellte rado functon has not yet been subscrbed to. Contact satellte rado servce provder at the telephone number dsplayed n the screen. After the connecton s made: Follow the nstructons gven by the operator. The actvaton process may take up to 10 mnutes. If t s successful, you wll see the dsplay wth the message Acqurng Sgnal. Please wat... ( page 74) followed by the man satellte rado menu ( page 74). Credt card nformaton may be requred for your applcaton. The actvaton process takes up to approxmately 10 mnutes. 69

79 Satellte rado* Satellte rado operaton Satellte rado operaton Quck reference 70

80 Satellte rado* Satellte rado operaton Functon 1 Swtchng COMAND on and off 2 Mutng the satellte rado audo (mutng on/off) 3 Selectng a staton va drect channel entry n the man satellte rado menu n the satellte memory preset Endng scan functon and play a staton 4 Actvatng the nput mode for channel number n the man satellte rado menu n the satellte memory preset Page Functon Page 5 Changng between staton 74 name and channel number 6 Return to prevous menu 7 Turn to hghlght a functon or a menu feld Press to perform a functon or access a submenu 8 Adjustng the volume 14 9 Automatc tunng ascendng/descendng Selectng a category n alphabetcal order ascendng/descendng a Swtchng to satellte rado 74 operaton b Color screen wth man rado menu 71

81 Satellte rado* Satellte rado operaton Menu overvew 72

82 Satellte rado* Satellte rado operaton Functon Page Functon Page 1 Man satellte rado menu wth menu secton 4 74 a Dsplays the current staton nformaton 82 2 Man satellte rado menu wth menu secton 5 b Dsplays the current track nformaton 81 3 Informaton lst: Staton category, staton name, ttle and artst c Dsplays the servce nformaton 82 4 Menu secton, frst level 74 5 Menu secton, second level 6 Preset menu wth 10 memory presets Savng a staton Selectng a staton 79 7 Satellte category lst Select a category 76 8 Man sound menu Sound settngs 83 9 Satellte staton lst Select a staton 77 73

83 Satellte rado* Satellte rado operaton Swtchng on See Subscrbng to satellte rado for mportant subscrpton nformaton ( page 69). After the COMAND acqures the sgnal, the man satellte rado menu wll appear. The staton last tuned to wll begn to play. You can dsplay 2, 3 and 4 n full: Staton nformaton ( page 82) Track nformaton ( page 81) Changng between staton name and channel number Each staton has both a staton name and a channel number. Press u. The channel number wll appear. Press u agan. The staton name wll reappear. Press W to swtch to satellte rado operaton. The above message wll appear at start up or when the sgnal s not avalable. Man satellte rado menu 1 Staton category 2 Staton name or channel number 3 Name of the track currently playng 4 Name of the artst 5 Menu felds to actvate submenus 6 Actvates menu felds, second level You can operate the telephone and the navgaton system whle the satellte rado s on. 74

84 Satellte rado* Satellte rado operaton Mutng Press Ö whle lstenng to the satellte rado. The symbol R wll appear n the symbol bar. Press Ö agan to resume lstenng to the current staton. The symbol R wll have dsappeared. Mutng wll also be canceled f you swtch to a audo source, e.g. normal rado, or f you alter the volume. Swtchng another system on Press key, e.g. c. COMAND wll swtch to normal rado operaton mode. Changng the program category Satellte rado statons are splt up nto categores. You can select between varous categores such as News, Sports News and Country Musc, f avalable. The category lst s sorted alphabetcally. Whle you are drvng, categores may be added or removed. Manual category scan Press g or h on the rocker swtch longer than 2 seconds. You wll hear a confrmaton beep f the beep tones functon has been actvated ( page 215). The avalable categores can be scanned n alphabetcal order. 75

85 Satellte rado* Satellte rado operaton Repeatedly press g or h agan wthn 5 seconds untl the desred category appears. Prevous category Press g. Next category Press h. Endng scan functon and playng a staton Selectng a program category Turn the rght-hand rotary/pushbutton v to hghlght Category n the man satellte rado menu and press to confrm. The category lst wll appear. The current category appears n red letterng. Turn the rght-hand rotary/pushbutton v to hghlght the desred category and press to confrm. The staton lst wth the correspondng category wll appear ( page 77). If you change a category, the current staton remans playng untl you select a staton wth the new category from staton lst. The scan functon ends: automatcally after 6 seconds or When you use the number keys 1 through 0 or t, u. The frst staton (alphabetcal order) of the chosen category wll begn to play. You wll see the correspondng category and staton name. Category lst 76

86 Satellte rado* Satellte rado operaton You can use the followng functons: Automatc tunng Staton selecton va staton lst Automatc staton scan ( page 78) Manual category scan ( page 75) Selectng a staton Staton selecton va drect channel entry ( page 78) Staton selecton from the memory lst ( page 80) Automatc tunng Press g or h on the rocker swtch brefly. The satellte rado wll tune n to the alphabetcally prevous or next recevable staton n the selected category. Staton selecton va staton lst The staton lst shows all the statons allocated to the selected category n alphabetcal order. The staton lst shows up to 24 staton names per category. If the category s no longer avalable, the staton lst s empty. Actvatng In the man satellte rado menu, turn the rght-hand rotary/push-button v to hghlght Staton lst and press to confrm. or Select a program category ( page 75). The staton lst wll appear. Staton lst Turn the rght-hand rotary/pushbutton v to hghlght the desred staton name and press to confrm. The selected staton wll begn to play, but the staton lst s retaned. 77

87 Satellte rado* Satellte rado operaton Selectng another staton (wthn 8 seconds) Turn the rght-hand rotary/pushbutton v to hghlght the desred staton name and press to confrm. Returnng to the man satellte rado menu or category lst Press *. or automatcally after 8 seconds. Automatc staton scan The statons n the selected category can be scanned n alphabetcal order for 8 seconds each. In the man satellte rado menu, press the rght-hand rotary/push-button v to confrm Scan. The scan functon wll begn, Scan wll appear n red letterng. Endng scan functon and playng a staton Press the rght-hand rotary/pushbutton v agan f you hear the desred staton. The staton selected wll appear wth the staton name. Scan wll appear n black letterng agan. Selectng a staton va drect channel entry 1 Input lne Press t. Input lne 1 wll appear. 78

88 Satellte rado* Satellte rado operaton Enter the number of the channel you wsh to select, e.g. 76. The channel you have selected wll begn to play. The correspondng staton name wll appear, f name s avalable. It s also possble to select a staton va drect channel number entry on the memory lst ( page 80). Savng staton manually Error messages: Invald Input: Maxmum Number of Channels s [number] The channel number you have entered s nvald. The number of statons avalable s smaller than the number you entered. Invald Channel: No Program avalable The channel number you have entered s nvald, because no staton s allocated to the selected channel. You can use the followng functons: Memory functons There are 10 presets avalable. Savng statons manually Selectng a staton from the Satellte preset memory ( page 80) Selectng a staton by enterng the channel number ( page 81) 1 Staton name of the staton currently selected 2 Current staton name appears n red letterng 3 Memory preset wth avalable staton name In both cases you wll lsten to the staton last tuned to. 79

89 Satellte rado* Satellte rado operaton In the man satellte rado menu, turn the rght-hand rotary/push-button v to hghlght SAT Presets and press to confrm. The SAT preset memory wll appear. Turn the rght-hand rotary/push-button v to hghlght the desred memory preset. Press the rght-hand rotary/pushbutton v longer than 2 seconds. The satellte rado saves the current staton at the memory preset selected. You wll hear a confrmaton beep f the beep tones opton was actvated n the system settngs ( page 215). The memory preset selected wll appear n the status lne, e.g. SAT2. You wll see the man satellte rado menu An exstng entry s overwrtten n the memory lst when a new nput s gven. automatcally after 8 seconds f you press *. Selectng a staton on the memory lst Turn the rght-hand rotary/push-button v to hghlght the desred memory preset. Press the rght-hand rotary/pushbutton v. You wll see the man satellte rado menu automatcally after 8 seconds f you press *. 80

90 Satellte rado* Satellte rado operaton Selectng a staton by enterng the channel number The channel number can be entered n the satellte preset memory. Press t. In the SAT preset memory the message Channel wll appear n 1. Enter the number of the channel you wsh to select, e.g. 76. The channel you have selected wll begn to play. The correspondng staton name wll appear, f name s avalable. Error messages ( page 79). You wll see the man satellte rado menu automatcally after 8 seconds f you press *. Dsplayng track nformaton In the man satellte rado menu, turn the rght-hand rotary/push-button v to hghlght V and press to confrm. Other menu felds wll appear. Turn the rght-hand rotary/push-button v to hghlght Ttle Info and press to confrm. You wll see (f avalable) the full track name the artst You wll see the man satellte rado menu For each entry, up to 36 dgts can be shown. automatcally after 8 seconds f you press *. 81

91 Satellte rado* Satellte rado operaton Dsplayng staton nformaton Turn the rght-hand rotary/push-button v to hghlght Staton Info and press to confrm. You wll see (f avalable) Dsplayng servce nformaton You can call the provder servce center for questons or releases, whenever you need. the full staton name the full category name addtonal nformaton comng from the staton the staton channel number You wll see the man satellte rado menu In the man satellte rado menu, turn the rght-hand rotary/push-button v to hghlght V and press to confrm. Other menu felds wll appear. automatcally after 8 seconds f you press *. 1 Phone number of the provder, (SIRIUS) or Call Servce Provder 2 The number of your SAT tuner 82

92 Satellte rado* Satellte rado operaton Swtchng back to the man satellte rado menu Press *. or Press the rght-hand rotary/pushbutton v. Sound settngs Set Bass/Treble/Balance ( page 65). Actvate sound optmzaton ( page 66). In the man satellte rado menu, turn the rght-hand rotary/push-button v to hghlght Sound and press to confrm. The man sound menu wll appear, dsplayng the actual settngs. 83

93 Satellte rado* Satellte rado operaton Multfuncton dsplay 1 No audo source has been swtched on 2 The satellte rado s swtched on 3 If the satellte rado s swtched on, you wll see SAT and the memory preset, f applcable 4 Staton name Press W on COMAND. The satellte rado s swtched on. Press F or G untl the desred staton name appears. 84

94 Telephone* Important notes Multfuncton dsplay Telephone operaton SMS functon Emergency call Servce numbers 85

95 Telephone* Important notes Important notes In chapter Telephone, you wll fnd detaled nformaton regardng the telephone*, ncludng emergency call, SMS functon and servce numbers. Warnng G Some jursdctons prohbt the drver from usng a cellular telephone whle drvng a vehcle. Whether or not prohbted by law, for safety reasons, the drver should not use the cellular telephone whle the vehcle s n moton. Stop the vehcle n a safe locaton before answerng or placng a call. If you nonetheless choose to use the cellular phone whle drvng, please use the handsfree devce and be sure to pay attenton to the traffc stuaton at all tmes. Use the cellular phone 1 only when road, weather and traffc condtons permt. Never operate rado transmtters equpped wth a bult-n or attached antenna (.e. wthout beng connected to an external antenna) from nsde the vehcle whle the engne s runnng. Dong so could lead to malfuncton of the vehcle s electronc systems, possbly resultng n an accdent and personal njury.! Rado transmtters, such as a portable telephone or a ctzens band unt should only be used nsde the vehcle f they are connected to a separate exteror antenna that has been approved by Mercedes-Benz. Please read the chapter Telephone frst before attemptng to operate your telephone. Always drve wth extreme cauton when you operate the telephone hands-free. For safety reasons, you should not use the moble telephone handset to make a call whle drvng the vehcle. If the sgnal strength s very weak (dsplay n the symbol feld of all menus): Wat untl recepton mproves before makng a call. 1 Observe all legal requrements 86

96 Telephone* Important notes Close the wndows and reduce all outsde nose as much as possble when you use hands-free operaton. A bref dsconnecton from the cellular network s not a malfuncton, as ths can occur when the network swtches areas. The phone wll automatcally try to sgn on to a network agan. If the message Locked. Please enter code appears, enter the unlock code to enable all telephone functons ( page 96). If a menu other than the telephone menu s dsplayed on the COMAND screen, the dsplay wll change f an outgong call s sent out va the multfuncton steerng wheel. In the followng stuatons, t s not possble or not yet possble to use the telephone: The telephone s already unlocked but s not or not yet regstered n the network. The message No Servce appears. The telephone wll try to regster nto an exstng network. If the network s avalable, the telephone wll be ready for use. The above message also appears f the network s no longer avalable due to weak sgnals f you try to make a call (message appears for 8 seconds) The message Telephone s beng actvated. Please wat. appears. COMAND prepares the telephone for use. Select other system functons, e.g. rado, by pressng the correspondng button or wat untl the telephone s actve. One of the two messages No telephone or Telephone not connected appears. Please connect the telephone. The message Telephone defectve appears. Please contact an authorzed Mercedes-Benz Center. 87

97 Telephone* Important notes In the followng stuaton, t s not yet possble to use the functons Dal number from phone book, Redal and Speed-dal : The moble telephone has been plugged nto ts holder correctly, the COMAND operatng unt has been swtched on and the phone book download functon has been actuated (see Telephone Operaton Gude). Once the download process has been completed, the above functons become avalable. It s not possble to make a call when one of the followng messages appears: System busy, redal? Dalng has faled because system s busy. No servce, redal? Dalng has faled because network cannot be receved. Phone off Tele Ad s actve, the telephone functon wll swtch on automatcally after Tele Ad s ended. 88

98 Multfuncton dsplay Telephone* Multfuncton dsplay Functon 1 Left dsplay on the speedometer 2 Rght dsplay on the tachometer Usng the control system 3 Adjustng the dal/dle tone volume durng a call I lowerng J rasng 4 To make a call K Accept an ncomng call Start dalng operaton Page Functon Page L End a call 97 Interrupt dalng 101 The message READY appears 5 Changng from system to system, dsplayng network provder E next H prevous 6 Pages through the phone book n alphabetcal order F forward G backward Turn the electronc key n the steerng lock to poston 1 or 2, refer to vehcle operatng nstructons. Actvate the redal memory

99 Telephone* Multfuncton dsplay Dsplay overvew P

100 Telephone* Multfuncton dsplay Functon Page 1 The telephone s swtched off Swtchng telephone operaton on 96 2 Enterng the unlock code 96 3 The system s searchng for 96 the correspondng network 4 The telephone s ready for use The vehcle s currently outsde the transmsson or recepton range Functon Page 6 Phone book s empty and/or 103 has not been loaded nto the COMAND telephone memory 7 Name selected from the 103 phone book 8 Dalng begns Dalng s completed and the 104 name s dsplayed. The dsplay wll reman untl you end the call Functon Page a Recepton strength s ndcated by up to 5 bars for a con- 97 nected and functonal telephone. b Number of the memory locaton and the name stored here 103 c Call tme

101 Telephone* Telephone operaton Telephone operaton Quck reference 92

102 Telephone* Telephone operaton Functon Page Functon Page Functon Page 1 Swtchng the COMAND on/off 2 Enterng the unlock code Enterng a telephone number Speed-dalng (only wth COMAND) Quck-dalng (for the frst 10 memory locatons) Enterng the emergency call Subsequent dalng Subsequent dalng Turnng Hghlghts a menu feld, a lst entry, or a symbol Pressng Actvates a sub-menu, confrms an entry/selecton Send s hghlghted Begn dalng End s hghlghted Ends the call 8 Sets the volume for handsfree operaton of the telephone (durng a call) 9 Swtchng the telephone operaton on/off a Color screen wth man telephone menu Calls the prevous menu, unless the man telephone menu s dsplayed 6 Deletes the last dgt or the whole entry f the unlock code or a phone number are entered 101 Mute s hghlghted Swtches off the mcrophone of the hands-free telephone 93

103 Telephone* Telephone operaton Menu overvew P

104 Telephone* Telephone operaton Functon Page Functon Page Functon Page 1 Man telephone menu 96 2 Telephone system s actve 96 3 Acceptng a call usng 98 COMAND Begn dalng Endng a call Mcrophone mute 98 6 Recepton strength s ndcated by up to 5 bars for a connected and functonal telephone M Incomng SMS message 121 RM ROAM ndcator RM n black - usng a home type system RM n red - usng a non home type system Input lne 8 Alphabet to enter the name Menu felds to actvate submenus 98 a Phone book selecton menu 105 s actvated when the nput lne 7 s empty Phone book wth names 105 s actvated accordng to nput of up to 3 letters b Man telephone menu wth other menu felds s actvated va the symbol V c SMS lst Readng or deletng an SMS message d Servce Number menu Selectng a servce number for an outgong call or changng a servce number e Notebook, notng a telephone number Dalng from the notebook f Calls functon The last ncomng calls are stored g Redal memory, the last 10 numbers (L01-L10) daled are stored L01 last number or name daled L01-L10 numbers or names daled prevously h Telephone menu for enterng telephone numbers Swtch back to the man telephone menu va the ABC/ 123 menu feld

105 Telephone* Telephone operaton Swtchng telephone operaton on 2 1 P Status lne, telephone s not yet logged onto network 2 Input lne for unlock code Press a. The menu to enter the unlock code wll appear. Enterng the unlock code Use the number keys 1 through 0 to enter the unlock code. Astersks nstead of dgts wll appear n the nput lne. If entered code s correct and the phone s regstered n a network, the phone s ready for use. Your unlock code prevents unauthorzed persons from usng your telephone. Be sure to memorze ths code, a three dgt number, carefully. Tmeport phones use a three-dgt code. V60 phones use a four-dgt code. The head unt wll unlock the phone usng the frst three dgts of the four-dgt V60 unlock code. If you enter an ncorrect code, the system returns to the menu for enterng the unlock code. You must always enter the unlock code when you swtch on the telephone the frst tme (f phone s n locked mode). 3 Ready for operaton dsplay 4 P Telephone s ready for operaton, Send s hghlghted 4 Recepton strength, ndcated by up to 5 bars RM appears, f the telephone s not usng the home system 96

106 Telephone* Telephone operaton If the phone memory has been downloaded to COMAND, the menu felds Phone Book, Last Calls and Calls wll be avalable. If the memory was not downloaded, the menu felds wll be dmmed out. Outgong calls ( page 100). Use one of these ways Swtchng telephone operaton off When the telephone s connected to the coled cord, press a on the COMAND control unt. or When the telephone s n portable mode, press # on the phone. Incomng call Acceptng the call at the multfuncton steerng wheel TEL 1 CALL The system detects an ncomng call, the phone rngs 2 Recepton strength The more bars appear, the stronger the sgnal of the cellular network D 1 CALL 2 S P Acceptng a call Press K. Audo source s automatcally muted. You can also accept a call, f another dsplay, e.g. navgaton, s shown on the multfuncton dsplay. Endng a call Press L. The man telephone dsplay appears. Communcaton between the multfunton dsplay and the COMAND screen: If dfferent systems appear, the changes made to COMAND wll have no effect on the drver nformaton dsplay. Press the COMAND key a to swtch to the telephone functons. 97

107 Telephone* Telephone operaton Acceptng a call usng COMAND Swtchng the mcrophone for the hands-free telephone off Turn the rght-hand rotary/push-button v to hghlght the Mute button and press to confrm. Press the rght-hand rotary/pushbutton v agan to cancel mutng. 1 Call The system detects an ncomng call, the phone rngs. P Press the rght-hand rotary/pushbutton v to confrm the Send button. The dsplay wll change to the call menu. An actve audo source wll be muted. Call menu 2 00:01:21 h The call tme appears 3 Phone number No telephone menu s shown on the screen frst press a P then you can accept or refuse the call. Settng the volume for hands-free operaton Rasng the volume Turn the left-hand rotary/push-button v to the rght. Lowerng the volume Turn the left-hand rotary/push-button v to the left. 98

108 Telephone* Telephone operaton Refusng or endng a call Use one of the three ways: Press the rght-hand rotary/pushbutton v to confrm the End button. or Press a. or Press *. Acceptng an ncomng call usng the moble telephone handset The telephone s located n the storage compartment under the armrest. See your vehcle s operatng nstructons. Press the rght-hand rotary/pushbutton v to confrm the Send button. Remove the telephone from ts cradle and conduct your call. The hands-free operaton wll swtch off. Endng a call Put the phone back n ts cradle. Warnng 1 Observe all legal requrements G Some jursdctons prohbt the drver from usng a cellular telephone whle drvng a vehcle. Whether or not prohbted by law, for safety reasons, the drver should not use the cellular telephone whle the vehcle s n moton. Stop the vehcle n a safe locaton before answerng or placng a call. If you nonetheless choose to use the cellular phone whle drvng, please use the hands-free devce and be sure to pay attenton to the traffc stuaton at all tmes. Use the cellular phone 1 only when road, weather and traffc condtons permt. 99

109 Telephone* Telephone operaton You can use the followng functons: Outgong calls Dalng a telephone number ( page 100) Dalng a telephone number Enterng a telephone number Use the number keys 1 through 0 to enter the telephone number. The menu changes when the frst dgt s entered. Dalng a number from the phone book ( page 103) Redal ( page 109) Dalng from calls lst ( page 112) Speed-dalng (only wth COMAND) ( page 113) Dalng a telephone number from the notebook ( page 115) Emergency call ( page 124) Press a. P The man telephone menu wll appear. 100

110 Telephone* Telephone operaton Correctng nput To correct only the last dgt Press r brefly. To correct the whole entry Press r longer than 2 seconds. Begn dalng Interrupt dalng Use one of the three ways: Press the rght-hand rotary/pushbutton v to confrm the End button. or Press a. or Press *. P When the Send button s hghlghted, press the rght-hand rotary/pushbutton v to confrm your nput. Dalng wll begn. If a name s assocated wth the phone number stored n the phone book, the name appears on the screen. COMAND wll mute an actve audo source. 101

111 Telephone* Telephone operaton Conductng a call When the call s ntated, the call tme appears n the screen. Use one of these three ways to end a call: Press the rght-hand rotary/pushbutton v to confrm the End button or call has been fnshed by the other party. or Press a. or Press *. Subsequent dalng Transmttng other dal tones: Durng a call you can press the number keys 1 through 0, u and t. The numbers daled wll appear n the menu for 10 seconds after the last key s pressed (subsequent dalng dsplay). Durng a conversaton, you can enter a telephone number n the notebook or edt an exstng one ( page 115). P

112 Telephone* Telephone operaton Dalng a number from the phone book Dalng usng the multfuncton steerng wheel In order to use ths feature, the phone book must have prevously been downloaded to the COMAND memory. Ths s performed automatcally each tme the portable phone s connected to the coled cord. TEL M39 D MERCEDES S The telephone s ready for operaton ( page 96). P Press E or H as often as necessary untl the telephone mode appears n the multfuncton dsplay. If ENTER CODE appears, enter your unlock code frst ( page 96). The message NO ENTRY appears when the portable phone has been put nto the cradle and no entres are stored n the phone book. Press F or G. You are pagng the phone book backwards or forwards n alphabetcal order. Name and memory locaton appear. or Press F or G longer than 2 seconds. You are scrollng through the phone book very quckly. The name that s selected appears n the dsplay. If you do not wsh to place a call, press L. The process wll be cancelled and the message READY appears agan. 103

113 Telephone* Telephone operaton TEL D 00:01:15 MERCEDES S The message DIALING appears n the dsplay. COMAND wll mute an actve audo source. When the call s ntated, the call tme appears n the dsplay. The name wll reappear.. Phone numbers are stored n the phone book accordng to memory locatons. A memory locaton starts wth M. Memory locatons avalable: M01 - M99 Press L to end the call. The message READY wll reappear. The audo source wll swtch on agan. P Press K when desred name appears n the dsplay. The telephone number s daled. 104

114 Telephone* Telephone operaton Dalng wth COMAND Openng phone book wth names 1 1 Input lne 2 Actvatng Phone book selecton menu (no nput n 1) or openng the phone book page ( page 106) 2 P Enter up to 3 letters by hghlghtng them one by one wth the rght-hand rotary/push-button v and press to confrm. The nput appears n 1. Turn the rght-hand rotary/push-button v untl 2 s hghlghted and press to confrm. or Press the rght-hand rotary/pushbutton v longer than 2 seconds after nput of the last letter. The relevant page of the phone book wll appear. If the nput lne s empty Turn the rght-hand rotary/push-button v untl 2 s hghlghted and press to confrm. The Phone book selecton menu wll appear. Phone Book selecton menu 3 Opens the frst page of the phone book (names) 3 P Press the rght-hand rotary/pushbutton v and confrm Read phone book.... The frst page of the phone book wll appear. 105

115 Telephone* Telephone operaton 4 5 The phone book stored n the phone memory s beng downloaded. 6 Turn the rght-hand rotary/push-button v to hghlght the desred entry and press to confrm. The man telephone menu appears, ndcatng the selected name. Phone Book page (names) P Hghlghted entry, sorted alphabetcally 5 Page back n the lst 6 Page forward n the lst Begn dalng P Press the rght-hand rotary/pushbutton v to confrm the Send button. The End button s hghlghted. 106

116 Telephone* Telephone operaton Use one of these three ways to end a call: Press the rght-hand rotary/pushbutton v to confrm the End button or the call has been fnshed by the other party. or Press a. Openng phone book (phone number) 1 Use the number keys 1 through 0 to enter up to 2 dgts one by one. The nput appears n 1. Turn the rght-hand rotary/push-button v untl 2 s hghlghted and press to confrm. or or Press *. 2 Press the rght-hand rotary/pushbutton v longer than 2 seconds after nput of the last dgt. P Input lne 2 Actvates Phone book selecton menu (no nput n 1) or opens the relevant phone book page The relevant page of the phone book wll appear. Turn the rght-hand rotary/push-button v to hghlght ABC/123 and press to confrm. The menu for enterng the phone number wll appear. 107

117 Telephone* Telephone operaton If the nput lne s empty Turn the rght-hand rotary/push-button v untl 2 s hghlghted and press the button. The Phone book selecton menu wll appear ( page 105). Phone book page (phone numbers) 3 Phone book entres sorted accordng to memory locatons Memory locatons avalable: M01 - M99 4 Page back n the lst, f flled 5 Page forward n the lst, f flled P Turn the rght-hand rotary/push-button v to hghlght the desred entry and press to confrm. The man telephone menu appears ndcatng the selected phone number and memory locaton. Begn dalng ( page 106), then conductng a call. Endng a call ( page 107). If there s no entry n the numbers lst, the message No entry n telephone book appears n the telephone menu. 108

118 Telephone* Telephone operaton Redal Dalng usng the multfuncton steerng wheel 1 The telephone s ready for operaton. 2 Number n the redal memory 3 Number n the redal memory, dalng has begun 4 Dalng s completed. Name or stll the daled number (name has not been saved). 5 Recepton strength - the more bars appear, the stronger the sgnal of the cellular network receved P Memory locaton number, the last 10 daled telephone numbers are stored L01, number daled last L01 to L10, numbers daled prevously 7 Call tme 109

119 Telephone* Telephone operaton The telephone s swtched on Press E or H repeatedly untl the correspondng telephone menu 1 appears n the dsplay. The telephone s ready for operaton. Press K. The redal memory appears wth the last number daled. Press F or G. Ths allows you to page forward or backward through the redal memory. The number selected wll appear n the dsplay wth the correspondng memory locaton. If you do not wsh to place a call, press L. The telephone dsplay 1 appears. Press K, when the desred number or name appears n the dsplay 2. Dalng wll begn 3. When the dalng has been completed, the name 4 s dsplayed f the name has been stored n the phone book, otherwse you wll contnue to see the phone number. The dsplay s mantaned for the duraton of the call. Press L to end the call. The telephone dsplay 1 appears. Press E or H to dsplay the next or prevous system. 110

120 Telephone* Telephone operaton Dalng wth COMAND Turn the rght-hand rotary/push-button v to hghlght Last Calls n the man telephone menu and press to confrm. or f there s a blank nput lne n the man telephone menu 1 Press the rght-hand rotary/pushbutton v when the Send button s hghlghted. Redal memory lst P Memory locatons L01 - L10 L01 the last number or name daled The Last Calls menu wll appear. If there s no entry n the numbers lst, the message No entry n lst appears n the telephone menu. P Turn the rght-hand rotary/push-button v to hghlght the desred phone number or name and press to confrm. The man telephone menu appears wth the desred phone number or name. L02 - L10 numbers or names daled prevously 111

121 Telephone* Telephone operaton Begn dalng Press the rght-hand rotary/pushbutton v to confrm the Send button. The message Dalng wll appear. The End button s hghlghted. Use one of these three ways to end a call: Press the rght-hand rotary/pushbutton v to confrm the End button or the call has been fnshed by the other party. or Press a. or Press *. Dalng from calls lst Incomng calls memory P Turn the rght-hand rotary/push-button v to hghlght Calls n the man telephone menu and press to confrm. The ncomng calls memory wll appear. Turn the rght-hand rotary/push-button v to select the desred phone number or name and press to confrm. The man telephone menu appears ndcatng the number or name selected. Begn dalng, endng a call, see above. 112

122 Telephone* Telephone operaton Speed-dalng (only wth COMAND) For all memory locatons You can enter up to 2 dgts Warnng G If you enter 1 and confrm ths memory locaton usng one of the descrbed ways n Begn dalng, the emergency number (default nput) wll be daled. The emergency call system s a publc servce. Usng t wthout due cause s a crmnal offense. The man telephone menu s dsplayed P Use the number keys, e.g. 1 and 4 to enter the memory locaton number. Begn dalng Use one of these ways Press the last number key for more than 2 seconds. or P Press the rght-hand rotary/pushbutton v to confrm the Send button. The phone number or name wll appear n the menu. The telephone wll dal the phone number that has been stored n ths memory locaton. When the call s ntated, the call tme wll appear. 113

123 Telephone* Telephone operaton If the memory locaton called s free, the message Memory locaton not allocated wll appear. Endng a call ( page 112). Quck-dalng for the frst 10 memory locatons Warnng If you press 1 the emergency number (default nput) wll be daled. G The emergency call system s a publc servce. Usng t wthout due cause s a crmnal offense. Endng a call ( page 112). The man telephone menu s dsplayed P Press 2 to 0 longer than 2 seconds. The phone number or name wll appear n the menu. The telephone wll dal the phone number that has been stored n ths memory locaton. When the call s ntated, the call tme wll appear. 114

124 Telephone* Telephone operaton You can enter a telephone number n the notebook or edt an exstng one Notebook durng a conversaton n the man telephone menu wthout havng a call P Openng the notebook The man telephone menu s dsplayed Turn the rght-hand rotary/push-button v to hghlght the V symbol and press to confrm. Other menu felds wll appear. Turn the rght-hand rotary/push-button v untl Notebook s hghlghted and press to confrm. Enterng the telephone number Press number keys 1 through 0, u and t. Correctng nput To delete only the last dgt Press r brefly. To delete the whole entry Press r longer than 2 seconds. Closng the notebook and storng nput Press *. Dalng a telephone number from the notebook Open the notebook. When the notebook phone number appears, press the rght-hand rotary/ push-button v to confrm the Send button. Dalng begns. You can transfer the notebook phone number to the phone book ( page 120). 115

125 Telephone* Telephone operaton Edtng the phone book Changng entres n the phone book You can edt the phone book and transfer a phone number from the notebook. In the man telephone menu, turn the rght-hand rotary/push-button v untl Phone book s hghlghted and press to confrm The Phone book selecton menu wll appear. Phone book selecton menu P Changng entres n the phone book 2 Addng entres n the phone book ( page 119) 3 Transferrng a telephone number from the notebook ( page 120) Turn the rght-hand rotary/push-button v to hghlght 1 and press to confrm. The phone book wll ether dsplay the lst of names sorted alphabetcally P the lst of phone numbers sorted by memory locatons. 116

126 Telephone* Telephone operaton Changng a name 4 Phone book entry selected 5 Character lst 6 The character selected appears magnfed 7 Confrmng the changed entry 8 Deletng the entry 4 P Turn the rght-hand rotary/push-button v to hghlght the desred phone book entry and press to confrm. An nput menu appears Turn the rght-hand rotary/push-button v to hghlght the desred letters one by one and press to confrm. The name wll appear n the nput lne. The nput cursor ndcates the current nput poston. You can enter up to 20 characters. Correctng an nput Deletng the last dgt Press r brefly. Deletng the whole entry Press r longer than 2 seconds. You can also select characters usng the number keys. Each number key has more than one assgnment. See table. Input wth number keys Select a character by pressng the key as lsted below the correspondng number of tmes. Key Character 1,. - 1 : / 2 A B C 2 3 D E F 3 4 G H I 4 5 J K L 5 6 M N O 6 7 P Q R S 7 8 T U V 8 9 W X Y Z u Blank 117

127 Telephone* Telephone operaton The selected character s automatcally adopted n the nput lne after 2 seconds or Press t or turn the rght-hand rotary/ push-button v. Storng changed names Use one of these ways Turn the rght-hand rotary/push-button v untl Apply s hghlghted and press to confrm. or Press the rght-hand rotary/pushbutton v longer than 2 seconds to confrm the last letter of the name. Now change the phone number. If you do not wsh to save the changes Press *. Changng a telephone number P Current name or name prevously changed (lght brown) appears only f you have entered a name for the telephone number a Input lne, hghlghted when actvated b Stores a telephone number n the phone book Enterng a telephone number Press the number keys 1 through 0, u and t. The telephone number appears n a. Correctng nput Deletng last dgt Press r brefly. Deletng the whole entry Press r longer than 2 seconds. Storng the phone number n the phone book Turn the rght-hand rotary/push-button v untl b s hghlghted and press to confrm. The man telephone menu wll appear. 118

128 Telephone* Telephone operaton Deletng an entry n the phone book Turn the rght-hand rotary/push-button v to hghlght Delete n the nput menu ( page 117) and press to confrm. Addng an entry to the phone book Enterng a name The query 2 appears. Yes s hghlghted. Press the rght-hand rotary/pushbutton v and confrm Yes. The man telephone menu appears. The entry s deleted. 1 P Name and telephone number of the entry to be deleted (lght brown) 2 Query (lght brown) 3 COMAND wll delete the entry from the phone book 4 The entry remans n the phone book If you don't want to delete the entry: Turn the rght-hand rotary/push-button v to hghlght No and press to confrm. The phone book lst wll appear. 2 1 Input lne 2 Transfers name P

129 Telephone* Telephone operaton Whle n the selecton menu ( page 116), turn the rght-hand rotary/push-button v untl Add an entry... s hghlghted and press to confrm. An nput menu wll appear. Turn the rght-hand rotary/push-button v untl the desred character s hghlghted and press to confrm. Repeat ths acton. The name wll appear n the nput lne. Confrm the name as descrbed under Storng changed names ( page 118). Now change the phone number. Correctng an nput ( page 117). Enterng and storng a telephone number P Prevously entered name 4 Input lne for phone number, enterng phone number wth numerc keys 1 to 0, key u and key t 5 COMAND stores the phone number Press the rght-hand rotary/pushbutton v to confrm the nput. COMAND stores the phone number and the man telephone menu wll appear. Storng a phone number n the notebook Whle n the Phone book selecton menu ( page 116), turn the rght-hand rotary/push-button v to hghlght Copy notebook... and press to confrm. Now you can enter a new name and phone number or edt an exstng entry, and store the entry. 120

130 Telephone* SMS functon SMS functon Wth ths functon you can receve, read and delete short text messages 1. COMAND may have to read n SMS messages frst. The message SMS loadng... wll appear. The readng operaton may take up to 30 seconds. Actvatng 1 Turn the rght-hand rotary/push-button v to hghlght V n the man telephone menu and press to confrm. Other menu felds wll appear. Turn the rght-hand rotary/push-button v to hghlght 2 and press to confrm. 1 If avalable from your carrer. The SMS lst wll appear. 2 P The symbol M wll appear when a new SMS message arrves, symbol RM (roamng mode) that may have been dsplayed before wll be replaced 2 Actvates the SMS lst 121

131 Telephone* SMS functon Readng SMS messages receved 1 Current SMS message s hghlghted, telephone number or name (f t s n the phone book), date and tme appear n brown The SMS messages (max. 10) are lsted n the order when they were receved. 1 P Use the approprate arrow symbols to page through the lst. Turn the rght-hand rotary/push-button v to hghlght the desred SMS message and press to confrm. The SMS message wll appear. COMAND does not dsplay so called chaned SMS messages. These contan more than 160 characters. For you to be able to read these messages, the sender should send the message agan n normal mode. 2 P SMS vew 2 Deletes dsplayed SMS message 122

132 Telephone* SMS functon Deletng an SMS message Press the rght-hand rotary/pushbutton v to hghlght Delete and press to confrm. The menu Delete SMS wll appear. Press the rght-hand rotary/pushbutton v to confrm Yes. If you don t want to delete the SMS message: Turn the rght-hand rotary/push-button v to hghlght No and press to confrm. The SMS vew wll appear. 1 2 If there was only one SMS message: The message s deleted, the man telephone menu wll appear. You can also delete an SMS message by pressng r. 1 Deletes current SMS message 2 SMS message s not deleted P If there are other SMS messages: The message s deleted, the next SMS message wll appear. After you have deleted the oldest SMS message, COMAND hghlghts the current SMS message n the lst. 123

133 Telephone* Emergency call Emergency call You can make an emergency call to an emergency rescue staton wth a moble communcaton network. The emergency call wll be placed as long as the correspondng moble communcaton network s avalable. To do ths, swtch the telephone on f you have not already done so. The emergency call wll also be placed f the phone s locked. Emergency calls may not be possble wth all moble phone networks or f certan network servces and/or telephone functons are actve. Check wth your local network operatng company. Ths functon places a call to the local provder. It does not ntate a Tele Ad call. Warnng G The emergency call system s a publc servce. Usng t wthout due cause s a crmnal offense.! If you enter 1 and press the rghthand rotary/push-button v, the number stored n memory locaton 1 (default s 9-1-1) wll be daled. Pressng or holdng 1 longer than 2 seconds wll also ntate the call.! It wll not be possble to complete the emergency call f the cellular system s busy. The message System busy, redal? appears. Take approprate measures to alert an emergency servce as soon as possble. 124

134 Telephone* Emergency call P If there s an actve Tele Ad call, the telephone man menu wll dsappear and you wll see the message Phone off. After the Tele Ad call s ended the telephone man menu wll reappear. See your vehcle s operator s manual. Telephone s ready for operaton Please ensure that the number stored n the memory locaton s the number you want to dal n case of an emergency (default s 9-1-1). The functon wll also be performed f the telephone s locked. P Intatng an emergency call If the telephone man menu or a memory menu s dsplayed Press number key 1 longer than 2 seconds (quck-dalng). The telephone begns dalng, the End button s hghlghted. When the call s ntated, the call tme wll appear. Do not place the emergency call Turn the rght-hand rotary/push-button v to hghlght the End button and press to confrm or press *. Endng the call, use one of the three ways: Press the rght-hand rotary/pushbutton v to confrm the End button. or Press a. or Press *. 125

135 Telephone* Servce numbers Servce numbers Callng a servce number 2 1 Turn the rght-hand rotary/push-button v to hghlght Servce No. n the man telephone menu and press to confrm. The menu Servce No. wll appear. Use the rght-hand rotary/push-button v to hghlght the servce you requre and press to confrm. Begn dalng Press the rght-hand rotary/pushbutton v to confrm the Send button. One of the messages Personal Servce Number or Roadsde Assstance wll appear. The End button s hghlghted. The man telephone menu wll appear. When the call s ntated, the call tme wll appear. P Personal Servce Number 2 Number for Roadsde Assstance Use one of these three ways to end a call Press the rght-hand rotary/pushbutton v to confrm the End button. or Press a. or Press *. 126

136 Telephone* Servce numbers Changng personal servce number P Turn the rght-hand rotary/push-button v to hghlght Change 1 n the Servce No. menu and press to confrm. The Change Servce No. 1 menu wll appear. Enter the new servce number wth number keys 1 through 0. Press the rght-hand rotary/pushbutton v to confrm the servce number. The new servce number s now stored n the Servce No. menu. Returnng to the menu Servce No. The menu Servce No. wll appear automatcally after 7 seconds or Press *. Pressng the rght-hand rotary/pushbutton v and nsertng an empty nput lne wll delete the personal servce number. 127

137 Telephone* Servce numbers Changng the number for Roadsde Assstance Turn the rght-hand rotary/push-button v to hghlght Change 2 n the Servce No. menu and press to confrm. The Change Servce No. 2 country lst wll appear. Select a new country servce number from the lst Turn the rght-hand rotary/push-button v to hghlght the country abbrevaton you want and press to confrm. The new servce number s now stored n the Servce No. menu. Returnng to the menu Servce No. The menu Servce No. wll appear automatcally after 7 seconds or Press *. 128

138 Navgaton Important notes Quck reference Destnaton nput Route gudance Destnaton memory Settngs 129

139 Navgaton Important notes Important notes Warnng G For safety reasons, you should only enter a destnaton when the vehcle s statonary. When the vehcle s n moton, a passenger should enter the destnaton. Study manual and select route before drvng. Do not watch dsplay screen or operate buttons whle the vehcle s n moton - let voce nstructons gude you. Stop at a safe locaton before usng buttons or makng correctons. Traffc regulatons always have prorty over any route recommendatons gven. Bear n mnd that at a speed of just 30 mph (approxmately 50 km/h), your car s coverng a dstance of 50 feet (approxmately 14 m) every second. The route calculated by COMAND s a recommendaton on how to best reach your selected destnaton. Durng route gudance, you wll not receve any nformaton on Traffc lghts Stop and yeld sgns Parkng or stoppng zones One-way streets Narrow brdges Smlar traffc regulaton data You should therefore always strctly observe traffc regulatons whle drvng. Drve carefully and always obey traffc laws and road sgns even f they contradct COMAND nstructons. 130

140 Navgaton Important notes Warnng G The CD reader contans a Class 1 laser product. There s a danger of nvsble laser radaton f the cover s opened or damaged. Do not remove the cover. The CD reader does not contan any parts whch can be servced by the user. For safety reasons, have any servce work whch may be necessary performed only by qualfed personnel.! COMAND calculates the route wth the help of data that s stored on the navgaton CD. Only use Mercedes-Benz navgaton CDs. Usng other navgaton CDs mght lead to malfunctons. Because of changes n local traffc patterns (e.g. road works) and/or ncomplete data, errors n calculaton may occur. As a result, the recommended route may devate from the deal route. The data stored on the CD only reflects local condtons at the tme of CD producton. The CD drve can read navgaton CDs and playback audo CDs. If an audo CD s n the CD drve and b s pressed, the message No CD avalable. Insert NAVI-CD type DX only wll be dsplayed. Remove the audo CD and nsert a navgaton CD ( page 137). 131

141 Navgaton Important notes! GPS (Global Postonng System) sgnals receved make t possble to determne the current vehcle poston. Devatons from the actual poston may occur f the recepton of GPS sgnals s dsturbed e.g. n parkng garages and tunnels f road condtons are bad dependng on the vehcle s condton If the recepton of the GPS sgnal s unavalable, you wll have to manually enter the current vehcle poston ( page 198). If your vehcle has been transported by a car, tran or ferry, COMAND needs some tme to fnd ts exact poston. Movng the vehcle a few yards s typcally enough to remedy ths stuaton. Travellng abroad If you ntend to travel through dfferent regons or abroad, you wll need the respectve navgaton CD. Contact your Mercedes-Benz Center or the Customer Assstance Center at FOR-MERCedes ( ) for avalable CDs. Change the navgaton CD ( page 137). 132

142 Navgaton Important notes Changng tres Mercedes-Benz recommends that you have your tres changed by an authorzed Mercedes-Benz Center. COMAND operates based on measurements taken by wheel revolutons. When changng tres, the correct tre nformaton must be entered for the system to operate as expected. See calbraton ( page 199). 133

143 Navgaton Quck reference Quck reference 134

144 Navgaton Quck reference Functon Page Functon Page Functon Page 1 Swtchng COMAND on and off 12 7 CD drve for navgaton CD or audo CD 45 9 Mutng current route nstructons or Swtchng the navgaton system on 3 Zoomng n for more detaled map 4 Zoomng out for less detaled map 5 Route gudance actve: Swtches between map and symbol dsplay Route gudance not actve: Actvates locaton map 6 Selectng a detour durng route gudance , , Pay attenton to regonal verson of navgaton CD 8 Route gudance actve: Dsplays estmated tme of arrval and current dstance to destnaton Route gudance not actve: Dsplays last destnaton drven Swtchng off voce output 171 for the duraton of the current route gudance a Ejectng navgaton CD 137 b Enterng destnaton va 149 the map c Dsplayng and removng 156 a long lst entry n full n a wndow d Swtchng back to the prevous menu e When enterng nformaton: Deletes last character or 142 complete entry 135

145 Navgaton Quck reference Functon Page Functon Page f Turn to Hghlght menu feld, lst entry or character h Requestng and dsplayng Info Servces System settngs Alter the map scale 151 j Color screen Press to Confrm entry/selecton, startng functon or actvatng submenu Actvate map scale bar 151 g Turn to Durng voce output: Lower (left)/rase (rght) the volume Press to Repeat current route nstructons 136

146 Navgaton Quck reference Changng the navgaton CD Insert another navgaton CD, e.g. a regonal verson, wth the label facng up. The llustrated message wll appear. COMAND loads the program stored on the navgaton CD.! Do not nterrupt the loadng process. Do not eject the navgaton CD untl the loadng process has been completed. If you do not remove an ejected CD, t wll be automatcally retreved by the CD drve after 10 seconds. The CD drve can read navgaton CDs, or playback audo CDs. Press q. COMAND ejects the nserted navgaton CD. Remove the CD. 137

147 Navgaton Destnaton nput Destnaton nput Menu overvew P

148 Navgaton Destnaton nput Functon Page Functon Page 1 Man destnaton nput menu 4 Destnaton va map menu Enterng a destnaton address 141 Settng destnaton va locaton on map 149 Retrevng a destnaton from the destnaton memory Selectng a destnaton va the map Enterng Ponts of Interest Selectng the last 12 destnatons 2 Man address menu Enterng a destnaton address 3 Man destnaton memory menu Settng destnaton va coordnates 5 Settngs menu Enterng vehcle locaton Calbratng tres 6 Ponts of Interest menu Settng destnaton va Pont of Interest lstng 7 Actvatng lst of last 12 destnatons for a recalculaton Selectng destnaton from the destnaton memory

149 Navgaton Destnaton nput Swtchng the navgaton system on Man destnaton nput menu P Press b. The dsplay that appears s dependent on the last navgaton functon used: Route gudance has been swtched off the man destnaton nput menu or the locaton map ( page 167). Route gudance has been swtched on the symbol dsplay wth an arrow ndcatng your drvng drecton ( page 162) or the map wth the symbol ndcatng current vehcle locaton ( page 162) Route gudance has been swtched on, COMAND has been swtched off for more than 2 hours an nqury menu ( page 187) The followng message wll appear when COMAND s preparng for navgaton startup: Navgaton beng actvated. Please obey all traffc rules.. Then, one of the 3 dsplays wll appear. Changng over to another system, e.g. rado Press c.! Potental fault messages durng preparaton of navgaton startup: Navgaton cannot be actvated. An error has occurred. CD-Readng error. Please use another CD. Eject the nserted CD and nsert a navgaton CD. No CD avalable. Please nsert NAVI-CD type DX only. Insert a current DX-coded navgaton CD. Usng other navgaton CDs mght lead to malfunctons. If the error has been elmnated, you wll see the message Navgaton beng actvated. Please obey all traffc rules. 140

150 Navgaton Destnaton nput Select one of the followng possbltes to enter a destnaton: Enterng destnaton address Enterng a destnaton address Selectng destnaton va the map ( page 149) Enterng Ponts of Interest ( page 155) Selectng last destnatons ( page 159) Selectng from destnaton memory ( page 192) Man address menu 1 Info/status lne 2 Selectng cty/suburb or selectng destnaton that has been entered last 3 Selectng a street 4 Selectng a cty center ( page 148) If you have prevously entered a cty/ suburb, you can hghlght 3 and 4. Press the rght-hand rotary/pushbutton v n the man destnaton nput menu and confrm Address. The man address menu wll appear. Swtchng back to the man destnaton nput menu Press *. 141

151 Navgaton Destnaton nput Select cty/suburb Cty/Suburb Entry nput menu 5 Input lne, selected characters (nvers) or last cty selected 6 Character set 7 The character selected appears magnfed 8 Moves the nserton pont one poston to the rght 9 Actvates the cty lst Press the rght-hand rotary/pushbutton v n the man address menu and confrm and confrm Cty/Suburb. The nput menu Cty/Suburb Entry wll appear. To adopt the cty last selected: Actvate the cty lst. To select another cty: Turn the rght-hand rotary/push-button v untl the desred letter n character set 6 s hghlghted. The character selected appears magnfed 7. Press the rght-hand rotary/pushbutton v to enter the character n nput lne 5. COMAND supplements the new entry wth addtonal letters so that the stored name of a cty/suburb wll appear. Enter other characters untl the desred cty name appears n 5. Correctng the entry For qucker nput, COMAND wll offer avalable characters from the character set 6 based on your selectons and the names of the ctes stored on the navgaton CD. Last character entered Press r brefly. All of the characters entered Press r longer than 2 seconds. 142

152 Navgaton Destnaton nput Actvatng the cty lst Cty lst a Selected cty s hghlghted b Dsplay the prevous page, f : c Dsplay the next page, f ; If the nput menu Cty/Suburb Entry s dsplayed Press the rght-hand rotary/pushbutton v longer than 2 seconds. or Turn the rght-hand rotary/push-button v to hghlght menu feld 9 and press to confrm. The cty lst wll appear. You can now do the followng n the cty lst: Confrm the cty/suburb that has already been hghlghted Select another cty/suburb Turn the rght-hand rotary/pushbutton v untl the desred cty/ suburb s hghlghted. Dsplay the prevous/next page Turn the rght-hand rotary/pushbutton v to hghlght one of the arrows b or c. Press the rght-hand rotary/pushbutton v. Confrmng the cty Press the rght-hand rotary/pushbutton v longer than 2 seconds. A selecton menu wll appear. If several optons of a cty/suburb are avalable, another menu wll appear where you must make and confrm your desred selecton. 143

153 Navgaton Destnaton nput d Cty prevously selected e Selectng a street f Selectng a cty center ( page 148) Press the rght-hand rotary/pushbutton v to actvate the nput menu Street. Enterng a street Street Entry nput menu g Input lne wth letters that have already been entered h Character set j The character selected appears magnfed k Moves the nserton pont one poston to the rght l Actvates the street lst Turn the rght-hand rotary/pushbutton v to hghlght the desred character n the character set h. The character selected appears magnfed j. Press the rght-hand rotary/pushbutton v to enter the character n nput lne g. COMAND supplements the new entry wth addtonal letters so that a saved street name wll appear. Enter other characters untl the desred street name appears n g. For qucker nput, COMAND wll offer avalable characters from the character set h based on your selectons and the names of the streets stored on the navgaton CD. Correctng the entry ( page 142). 144

154 Navgaton Destnaton nput Actvatng the street lst Street lst P If the nput menu Street Entry s dsplayed Press the rght-hand rotary/pushbutton v longer than 2 seconds. or Turn the rght-hand rotary/push-button v to hghlght menu feld l and press to confrm. The street lst appears. Here you can, as n the cty lst ( page 143), select another street or dsplay the prevous/next page. Press the rght-hand rotary/pushbutton v longer than 2 seconds. Ths wll confrm cty/suburb and street of the desred destnaton. The selecton menu Destnaton Entry appears. If several optons of a street are avalable, another menu wll appear where you must make and confrm your desred selecton. m Street prevously selected n Dsplay the prevous page, f : o Dsplay the next page, f ; 145

155 Navgaton Destnaton nput Contnung destnaton nput Destnaton Entry selecton menu 1 Addng an ntersecton 2 Addng a house number 3 Selectng a destnaton va the map ( page 149) 4 Savng a destnaton address n the destnaton memory ( page 193) 5 Confrmng the destnaton and calculatng route ( page 159) You have now selected the destnaton and can defne your destnaton address more precsely n the followng manner: Addng an ntersecton Addng a house number Selectng t va the map ( page 149) Selectng a cty center, f you do not want to select a street ( page 148) or Confrm the destnaton and calculate the route ( page 159) In order to do so, House No. must be shown n black. Press the rght-hand rotary/pushbutton v to confrm OK n the menu Destnaton Entry. Addng an ntersecton If the menu Destnaton Entry s dsplayed Turn the rght-hand rotary/push-button v to hghlght 1 and press to confrm. A lst of roads ntersectng wth the prevously nput street wll appear. 146

156 Navgaton Destnaton nput Turn the rght-hand rotary/push-button v to hghlght the name of the ntersecton. The prevous/next page can be dsplayed as descrbed for the cty lst ( page 143). Press the rght-hand rotary/pushbutton v to confrm the selecton. The selecton menu Destnaton Entry wll appear, ndcatng the ntersecton. P Press the rght-hand rotary/pushbutton v longer than 2 seconds to calculate the route ( page 159). Addng a house number Dependng on the data stored on the navgaton CD, you can add a house number to the destnaton address. In order to do so, the menu feld House no. must be shown n black n the selecton menu Destnaton Entry. Turn the rght-hand rotary/push-button v to hghlght 2 and press to confrm. An nput menu wll appear. Turn the rght-hand rotary/push-button v to hghlght the desred numbers one after the other and press to confrm. The numbers wll appear n the nput lne. Press the rght-hand rotary/pushbutton v longer than 2 seconds. A lst wll appear. 147

157 Navgaton Destnaton nput The house numbers usually appear on the lst n blocks, e.g. 1-5 odd numbers even numbers 1-50 mxed numbers Turn the rght-hand rotary/push-button v to hghlght the desred block and press to confrm. Selectng a cty center You can actvate the lst Center Entry n the man address menu ( page 141) or after selectng a cty ( page 144). Turn the rght-hand rotary/push-button v to hghlght the desred entry and press to confrm. The selecton menu Destnaton Entry wll appear. Press the rght-hand rotary/pushbutton v longer than 2 seconds to calculate the route ( page 159). The selecton menu Destnaton Entry wll appear. Press the rght-hand rotary/pushbutton v longer than 2 seconds to calculate the route ( page 159). Turn the rght-hand rotary/push-button v to hghlght Center and press to confrm. The lst Center Entry wll appear. 148

158 Navgaton Destnaton nput Selectng a destnaton va the map Actvatng the map from the man destnaton nput menu Destnaton va Map menu Settng the map center 1 To the prevous destnaton 2 To the current vehcle locaton 3 Actvates the Cty/Suburb Entry nput menu and selects the correspondng cty center after nput 4 Actvates the coordnate destnaton nput menu Turn the rght-hand rotary/push-button v to hghlght Destnaton va Map... (Destn va Map) n the man destnaton nput menu and press to confrm. The selecton menu Destnaton va Map wll appear. Turn the rght-hand rotary/push-button v to hghlght 1, 2, 3 or 4 and press to confrm. 1 and 2 The map wth the crosshars wll appear 3 The Cty/Suburb Entry menu wll appear ( page 142) Enter the cty n the nput menu and confrm t. Then, the map wth the crosshars wll appear. The crosshars are centered on the cty center. 4 The Coordnate destnaton nput menu wll appear ( page 153). 149

159 Navgaton Destnaton nput Contnue destnaton nput va the map Turn the rght-hand rotary/push-button v to hghlght Map and press to confrm. The map wth the crosshars wll appear. Durng destnaton nput, the map wll always appear facng north (north s on top). Map appearance s dependent on the selected map scale. Movng the crosshars Use the number keys (refer also to the arrows shown on the keypad) to move the crosshars around the map. 1 to the top left 2 up 3 to the top rght 4 to the left 6 to the rght 7 to the bottom left Map wth crosshars 5 Street name or name of the symbol (e.g. parkng area) that the crosshars are centered on 6 Crosshars to select the destnaton 7 Symbol for current vehcle locaton 8 Current map scale 8 down 9 to the bottom rght 150

160 Navgaton Destnaton nput As you move the crosshars towards the edge of the screen usng the number keys, an adjacent secton of the map s actvated. It may take a few seconds to pont to each new map. Adjacent map sectons overlap somewhat so that destnatons at the edge of the map can be marked as well. Alterng the map scale Actvatng the scale selector a. Press + or,. or Press the rght-hand rotary/pushbutton v. A dvson mark corresponds to an avalable scale. You can select 13 dfferent scales rangng from 0.05 mles/nch to 500 mles/nch. 9 Current map scale a Scale selector b New map scale (flled arrow) c Square ndcates map secton whch s recalculated 151

161 Navgaton Destnaton nput Zoomng n for more detaled map Press +. or Turn the rght-hand rotary/push-button v to the left. A flled arrow for the new scale b and a square c appear. Press the rght-hand rotary/push-button v to calculate the map wth the new scale. Zoomng out for less detaled map Press,. or Turn the rght-hand rotary/push-button v to the rght. The new scale wll appear. Press the rght-hand rotary/pushbutton v to calculate the map wth the new scale. Ths wll take place automatcally after 6 seconds. Confrmng destnaton and calculatng route The crosshars hghlght the desred destnaton Press the rght-hand rotary/pushbutton v longer than 2 seconds. Then calculate the route ( page 159). 152

162 Navgaton Destnaton nput Destnaton entry va coordnates You can enter a destnaton f the correspondng coordnates are known. Coordnate Destnaton menu Turn the rght-hand rotary/push-button v to hghlght Coordnate Destnaton... n the Destnaton va Map menu ( page 149) and press to confrm. The Coordnate Destnaton nput menu wll appear. Actvatng the adjustment mode Press the rght-hand rotary/pushbutton v. The entry wll appear n red. Alterng the settng Turn the rght-hand rotary/push-button v. or Enter coordnates wth the number keys. Storng the new settng and movng the markng to the next entry Press the rght-hand rotary/pushbutton v. The entry wll appear n black. Subsequently repeat operatng sequence and enter coordnates completely. Changng between western (W) and eastern (E) longtude Press u repeatedly. Changng between northern (N) and southern (S) lattude Adjustment range Longtude (W - West or E - East) mn 0-59 s s Lattude (N - North or S - South) mn 0-59 s s Press t repeatedly. 153

163 Navgaton Destnaton nput Confrmng coordnate destnaton P Press the rght-hand rotary/pushbutton v longer than 2 seconds. The above dsplay appears. Startng the adjustment mode Turn the rght-hand rotary/push-button v to hghlght OK and press to confrm. Storng the coordnate destnaton n the destnaton memory wth a name Turn the rght-hand rotary/push-button v to hghlght Save and press to confrm. Ths wll actvate the destnaton memory ( page 193). Actvate the map wth crosshars Turn the rght-hand rotary/push-button v to hghlght Map and press to confrm. Ths wll actvate the map ( page 150). 154

164 Navgaton Destnaton nput Enterng Ponts of Interest Ths functon allows you to select Ponts of Interest such as gas statons, parkng facltes or shoppng centers. Ponts of Interest selecton menu Select a Pont of Interest 1 Around the current area of vehcle locaton 2 Around the prevous destnaton area 3 In the surroundng area of another cty 4 As regonal destnaton, e.g. arport Turn the rght-hand rotary/push-button v to hghlght Ponts of Interest n the man destnaton nput menu and press to confrm. The selecton menu Ponts of Interest wll appear. Turn the rght-hand rotary/push-button v to hghlght 1 to 4 and press to confrm. 1, 2, 4 A Category lst wll appear 3 The nput menu Cty/Area wll appear ( page 157) Around the current area of vehcle locaton or prevous destnaton area Category lst 5 Dsplay prevous page, f : 6 Dsplay next page, f ; 155

165 Navgaton Destnaton nput Turn the rght-hand rotary/push-button v to hghlght 1 or 2 and press to confrm. The lst Select Category wll appear. Turn the rght-hand rotary/push-button v to hghlght the desred category and press to confrm. A correspondng lst wll appear Dsplay the entry n full n a wndow 9 Press u. Press u agan to remove 9. Selectng the desred destnaton Turn the rght-hand rotary/push-button v to hghlght the entry n the selecton lst and press to confrm. Not all Ponts of Interest may be lsted on the CD. P Pont of Interest entry wth dstance to destnaton n mles (as the crow fles) 8 Symbol for long entry 9 Complete entry n a wndow Then calculate the route ( page 159). 156

166 Navgaton Destnaton nput In the surroundng area of another cty Turn the rght-hand rotary/push-button v to hghlght the desred destnaton n the cty lst and press to confrm. Regonal destnatons The lst Select Category wll appear. If several optons of a cty/suburb are avalable, another menu wll appear where you must make and confrm your desred selecton. Cty/Area nput menu P Turn the rght-hand rotary/push-button v to hghlght Select Cty... n the Ponts of Interest menu and press to confrm. The nput menu Cty/Area wll appear. Select the cty and actvate the cty lst ( page 143). Not all Ponts of Interest may be lsted on the CD. Turn the rght-hand rotary/push-button v to hghlght the desred category and press to confrm. A correspondng lst wll appear. Select the desred destnaton. Then calculate the route ( page 159). Turn the rght-hand rotary/push-button v to hghlght Regonal... n the Ponts of Interest menu and press to confrm. The lst Select Category wll appear. Not all Ponts of Interest may be lsted on the CD. 157

167 Navgaton Destnaton nput Actvatng the lst Turn the rght-hand rotary/push-button v to hghlght the desred entry and press to confrm. Then calculate the route ( page 159). Turn the rght-hand rotary/push-button v to hghlght the desred category and press to confrm. An nput menu, e.g. Arport wll appear. Select an entry ( page 142) and then actvate the lst. P Press the rght-hand rotary/pushbutton v longer than 2 seconds. or Turn the rght-hand rotary/push-button v to hghlght Lst and press to confrm. The lst wll appear. 158

168 Navgaton Destnaton nput Selectng the last destnatons Ths functon allows you to dsplay up to 12 destnatons you last selected. Turn the rght-hand rotary/push-button v to hghlght Last destnatons... n the man destnaton nput menu and press to confrm. Calculatng a route Frst select the calculaton mode and then calculate your route. 1 The lst Last destnatons... wll appear. Turn the rght-hand rotary/push-button v to hghlght the desred destnaton and press to confrm. Then calculate the route. Selectng calculaton mode COMAND calculates the route ether as the Fast Route 1 or Short Route 2 whereby traffc routes 3, 4 and 5 can be ncluded or avoded (wth several selectons). 1 Destnaton selected last P

169 Navgaton Destnaton nput Selectng a route mode P 1 Route calculated for optmum drvng tme 2 Route calculated for optmum drvng route Turn the rght-hand rotary/push-button v to hghlght the desred route mode and press to confrm. Includng P or avodng Q traffc routes, several selectons are avalable 3 Calculates the route wth/wthout freeways 4 Calculates the route wth/wthout ferry connectons, car trans 5 Calculates the route wth/wthout toll roads 6 COMAND calculates the route wth the selected settngs Toll roads appear n green on the map. Turn the rght-hand rotary/push-button v to hghlght the desred type of road and press the button. Calculatng the route Press the rght-hand rotary/pushbutton v longer than 2 seconds. or Turn the rght-hand rotary/push-button v to hghlght OK and press to confrm. As soon as calculaton begns, you wll see a correspondng message and hear the voce output The route s beng calculated. In the event that no reasonable alternate route for that destnaton exsts, COMAND wll calculate the route ncludng 3 to 5 even f these selectons are to be avoded. 160

170 Navgaton Destnaton nput Calculaton method 8 Destnaton P Cancel route calculaton Turn the rght-hand rotary/push-button v to hghlght Cancel and press to confrm. The man destnaton nput menu wll appear. Durng the calculaton, the symbol dsplay wll appear after a few seconds. 9 Calculaton of route a Arrow ndcatng the drecton to the destnaton (as the crow fles) b Dstance to the destnaton (as the crow fles) P The route wll be calculated. COMAND dentfes the road you are travellng on. Poston c now ndcates the drvng drecton. You wll e.g. hear the voce output Please, make the next rght turn. 161

171 Navgaton Route gudance Route gudance Route gudance prncples 162

172 Navgaton Route gudance Functon Page Functon Page Functon Page 1 Name of the street onto whch you should turn or Dstance to destnaton or Name of the route (e.g. I-695) and drecton of travel to follow (e.g. North) 2 Arrow ndcatng drvng drecton or Destnaton drecton Symbol for new calculaton of the route Destnaton flag 3 Name of the street on whch you are travellng 4 Other dsplay types Dstance bar to the next maneuver Dstance to the next maneuver n mles OFF MAP - vehcle s located outsde of the dgtzed map area OFF ROAD - vehcle s located on a road whch s not dgtzed DEST AREA - vehcle s approachng the destnaton, the destnaton area s not dgtzed CALC. ROUTE - a route s beng calculated NEW ROUTE - an exstng route s beng recalculated NO ROUTE - the COMAND s unable to calculate a route Actvatng the map Route gudance s actve: You can also press l Markng a way pont Mxture of map and symbol 175 dsplay 8 Actvatng the symbol 174 dsplay Route gudance s actve: You can also press l. 9 Selectng 177 map orentaton a Current map scale 176 b Current vehcle locaton 169 wth route (blue lne) c Destnaton flag 163

173 Navgaton Route gudance After the destnaton s selected and the route s calculated, the navgaton system wll gude you to the destnaton usng both pctoral dsplays and voce outputs. Durng route gudance, you can select the followng 3 screen dsplays: Symbol dsplay Always appears after a route has been calculated Map dsplay Actvate the map wth menu feld 5, swtch back to symbol dsplay wth menu feld 8 Mx As the vehcle approaches a maneuver pont, COMAND swtches automatcally from the map to the symbol dsplay. Once the turn has been completed, the map s dsplayed agan. In the map dsplay, menu felds 6, 8, 9 are removed after 6 seconds. Turn the rght-hand rotary/push-button v to dsplay the menu felds agan. The map appears automatcally after 5 seconds f the vehcle s located on a road whch s not dgtzed (message OFF ROAD). If COMAND recognzes a stored road, the symbol dsplay s called up agan. 164

174 Navgaton Route gudance Requestng destnaton and route nformaton Once you have calculated the route, you can request destnaton and route nformaton. Press.. The selecton menu Destnaton Info wll appear. Turn the rght-hand rotary/push-button v to hghlght 3 to 8 and press to confrm. If the vehcle drves on a road whch s not dgtzed, 1 and 2 wll appear n gray and dsplay the last avalable nformaton. The message Off Road: dest. nfo not up-to-date appears underneath. Destnaton Info selecton menu 1 Estmated tme of arrval at destnaton 2 Current dstance to destnaton 3 Dsplays route lst 4 Dsplays locaton map 5 Dsplays current destnaton 6 Requests route mode 7 Actvates route map 8 Dsplays stop-over Route gudance s swtched off The last destnaton drven to wll appear n lne

175 Navgaton Route gudance Dsplayng route lst P Turn the rght-hand rotary/push-button v to hghlght 3 and press to confrm. The message Complng Route Lst... wll appear. Dsplayng the entry n full n a wndow Press u. Press u agan to remove the wndow. Dsplayng the next/prevous page (f arrows are flled) Turn the rght-hand rotary/push-button v to hghlght ;/: and press to confrm. Swtchng back to the symbol or map dsplay Press * twce. The route lst s updated durng the trp. It contans a selecton of streets whch wll be travelled or whch stll le ahead. If a longer route s calculated, e.g. to avod sectons of the freeway ( page 160), these freeways may stll appear on the route lst. As the vehcle approaches the freeway, t wll be deleted from the route lst. 166

176 Navgaton Route gudance Actvatng the locaton map If route gudance s actve Turn the rght-hand rotary/push-button v n the selecton menu Destnaton Info to hghlght Locaton map and press to confrm. The locaton map faces north (Northup). 1 Geographc longtude and lattude for your current locaton 2 Number of satelltes receved 3 Scale used the last tme the locaton map was actvated 4 Current vehcle locaton n the center of the screen 5 Name of the street the vehcle s currently travellng on Alterng the map scale ( page 176). Swtchng back to the symbol or map dsplay Press * twce. If route gudance s swtched off Press l. The locaton map wll appear. Press l agan to actvate the man destnaton nput menu. If the locaton map appears after COMAND has been swtched on, press b to actvate the man destnaton nput menu. 167

177 Navgaton Route gudance Dsplayng current destnaton Turn the rght-hand rotary/push-button v n the selecton menu Destnaton Info to hghlght Current Destnaton and press to confrm. You wll see the current destnaton. Swtchng back to the symbol or map dsplay Press *. Requestng route mode 1 Settngs for route calculaton mode 1 P Turn the rght-hand rotary/push-button v n the selecton menu Destnaton Info to hghlght Optons and press to confrm. The settngs for the current route are dsplayed. Selectng calculaton mode ( page 159) Selectng a detour durng destnaton gudance ( page 181) Markng a way pont ( page 178) Swtchng back to the symbol or map dsplay After 15 seconds, COMAND wll return automatcally to the symbol or map dsplay. or Press *. 168

178 Navgaton Route gudance Actvatng the route map Turn the rght-hand rotary/push-button v n the selecton menu Destnaton Info to hghlght Route Map and press to confrm. The route map faces north (North-up) and shows the general vew for the whole route. Dsplayng a stop-over You can dsplay ths nformaton f you have prevously selected a way pont ( page 178). The map scale selected depends on the route. 1 Current vehcle locaton 2 Route dsplayed as blue lne 3 Destnaton Swtchng back to the symbol or map dsplay Press *. 1 Way pont Place, type of stop-over and name Turn the rght-hand rotary/push-button v n the selecton menu Destnaton Info to hghlght Stop and press to confrm. 169

179 Navgaton Route gudance Begnnng route gudance Once the route has been calculated, the symbol dsplay wll appear. If you now are at the maneuver pont, you wll also hear a voce output, e.g. Please turn rght. Durng route gudance, you can select the followng 3 screen dsplays: Symbol dsplay Map dsplay Mx of map and symbol dsplay ( page 175) Voce output Durng the trp, apart from vsual nformaton (symbol or map dsplays), COMAND also provdes all of the necessary route nformaton va voce output. COMAND gves you spoken recommendatons when route gudance begns after the route has been calculated before and durng a change n the drvng drecton on reachng the destnaton or a way pont Warnng G Voce output s ntended to drect you whle drvng wthout dvertng your attenton from the road and drvng. Please always use ths feature nstead of consultng the symbol or map dsplay for drectons whle drvng whch may cause you to dvert your attenton from drvng and ncrease your rsk of accdent. 170

180 Navgaton Route gudance If an audo source s swtched on, e.g. the rado, the voce output wll be mxed wth that of the audo source. You can ndvdually set the audo volume dfferental between voce output/audo source ( page 64). COMAND mutes navgaton voce outputs durng telephone/ Tele Ad operaton. Repeatng current voce output Press the left-hand rotary/push-button v brefly. Mutng current voce output Press Ö brefly durng a voce output. You wll hear the next announcement normally. Swtchng the voce output off for the duraton of the current route gudance Press Ö longer than 2 seconds durng a voce output. You wll see the message Voce output s muted. Swtchng the voce output on agan The current route gudance has been completed. Voce output wll automatcally swtch on agan. Durng a voce output Press the left-hand rotary/push-button v. Alterng the voce output volume At the COMAND control unt Turn the left-hand rotary/push-button v durng a voce output. COMAND wll accept ths settng for followng voce outputs. At the multfunctonal steerng wheel You can alter the volume wth the steerng wheel keys durng a voce output as well. To rase the volume Press J. To lower the volume Press I. 171

181 Navgaton Route gudance Turnng onto a street Example of a traffc stuaton wth voce output Advance notce of rght turn Just before a rght turn 1 Prepare to turn rght (advance notce) 2 Turn rght after 250 feet 3 Please, turn next rght Manual recall of the current voce nstructon Press left-hand rotary/push-button v. 4 Name of the street you are to turn onto 5 Arrow ndcatng drvng drecton 6 Name of the street you are travellng on 7 Dstance n mles to rght turn As you approach a juncton or nterchange (e.g. I-695), COMAND wll advse you the drecton of travel to follow (e.g. North) as well as the name of the route. 8 Name of the street you wll to turn onto 9 Rght-turn arrow a Name of the street you are now drvng on b Dstance graph to turnng pont, reduces as you approach the ntersecton In specal stuatons, e.g. when turnng quckly several tmes n successon, there may be devatons n the accuracy of the voce nstructons. 172

182 Navgaton Route gudance Followng the course of the road Drvng through an ntersecton Before you drve through an ntersecton, you wll be nformed of the contnued route, e.g. Prepare to bear left soon (advance notce) Bear left after 250 feet Please bear left Please note the followng dfference n voce output 1 Dstance to destnaton 2 Arrow ndcatng drvng drecton 3 Name of the road you are currently drvng on 4 Dstance n mles to the next maneuver pont 1 Name of the street onto whch you are to drve 2 Part of the street, not to be followed 3 Name of the street you should drve on 4 Dstance graph to turnng-pont As you approach a juncton or nterchange (e.g. I-695), COMAND wll advse you the drecton of travel to follow (e.g. North) as well as the name of the route. Stuaton Makng a turn onto a street Drvng through an ntersecton Example of voce output...turn left/rght....bear left/rght. 173

183 Navgaton Route gudance Changng to map dsplay 1 Actvates map dsplay 2 Return to symbol dsplay 3 Last scale selected Alterng the map scale ( page 176) 4 Actual vehcle locaton 5 Name of the street you wll turn onto You can select one of the two possbltes: Press the rght-hand rotary/pushbutton v to confrm 1. or Press l. The map wll appear n the scale last selected. COMAND wll remove the menu bar (except for 3) after 6 seconds. Turn the rght-hand rotary/pushbutton v to recall the menu bar to the screen. 174

184 Navgaton Route gudance Mx of map and symbol dsplay If the functon Mx s swtched on, the symbol dsplay s actvated automatcally from the map dsplay before makng a maneuver. After you have made the maneuver, the map wll appear agan. Swtchng the mx functon on Turn the rght-hand rotary/push-button v to hghlght Mx n the symbol dsplay and press to confrm. Mx appears n red. Swtchng the mx functon off Turn the rght-hand rotary/push-button v to hghlght Mx n the map or symbol dsplay and press to confrm. Mx appears n black agan. Map dsplay before a maneuver, mx functon s swtched on - As the vehcle approaches the maneuver pont (e.g. U-turn), COMAND wll actvate the symbol dsplay. After you have made the U-turn, the map wll appear agan. 175

185 Navgaton Route gudance Alterng the map scale Actvatng the scale selector Press + or,. or Turn the rght-hand rotary/push-button v to hghlght 1 and press to confrm. The scale bar wll appear. A dvson mark corresponds to an avalable scale. You can select 13 dfferent scales rangng from 0.05 mles/nch to 500 mles/nch. 1 Current map scale 2 Scale selector 3 New map scale Zoomng n for more detaled map Press +. or Turn the rght-hand rotary/push-button v to the left. The map wll appear automatcally. Zoomng out for less detaled map Press,. or Turn the rght-hand rotary/push-button v to the rght. The map wll appear automatcally. 176

186 Navgaton Route gudance Selectng map orentaton You can ether select the map north or poston t wth the drvng drecton pontng up. Selectng drvng drecton pontng up To return to North-up Turn the rght-hand rotary/push-button v to hghlght 1 and press to confrm. The north arrow wll appear agan. Map orentaton Characterstcs North-up North arrow always ponts to the top North-up: Map s dsplayed facng north 1 Selectng map orentaton North arrow! or compass needle < (black tppng pontng to the north) 2 Symbol for current vehcle locaton Headng-up: Map s dsplayed facng drvng drecton pontng up Turn the rght-hand rotary/push-button v to hghlght 1 and press to confrm. Symbol 2 ponts n the drvng drecton, the compass needle wll appear. Headng-up The symbol for the current vehcle locaton s turnng on the map The symbol for the current vehcle locaton always ponts to the top The compass needle s turnng, the black pont always ponts north 177

187 Navgaton Route gudance Markng a way pont You can store a way pont durng route gudance. Turn the rght-hand rotary/push-button v to hghlght 2 to 6 and press to confrm. Select the desred way pont. Start route gudance. Way Pont menu 1 Actvate Way Pont menu Turn the rght-hand rotary/push-button v to hghlght 1 and press to confrm. The Way Pont menu wll appear. 2 Select a category 3 Actvates the man address menu ( page 141) 4 Actvates the Ponts of Interest selecton menu ( page 155) 5 Actvates the man destnaton memory menu ( page 192) 6 Actvates the Coordnate Destnaton nput menu ( page 153) 178

188 Navgaton Route gudance Startng route gudance After you have entered an address, the menu felds Intersecton and House No... may appear n black, ndcatng that t s possble to select them. Press the rght-hand rotary/pushbutton v to confrm Start Gudance. P You wll now see the nformaton correspondng to route calculaton and hear the voce output: The route to your ntermedate destnaton s beng calculated. The prevously selected route mode wll be mantaned. After you reach the way pont, you wll contnue to follow the route to the orgnal nput destnaton. 179

189 Navgaton Route gudance Cancel the calculaton Press the rght-hand rotary/pushbutton v to confrm Cancel. Deletng way pont Press the rght-hand rotary/pushbutton v to confrm Delete stopover.... The way pont has been deleted. If you do not want to delete the way pont Press *. It s also possble to delete a way pont n the menu ( page 185). Turn the rght-hand rotary/push-button v to hghlght Stop n the symbol or map dsplay and press to confrm. The Way Pont menu wll appear, Delete stop-over... s hghlghted. If the menu bar s not vsble n the map: Turn the rght-hand rotary/pushbutton v. The menu bar wll appear. 180

190 Navgaton Route gudance Selectng a detour Man detour menu P It s possble to block route sectons ahead 2 Ends the detour functon, the prevous route s calculated 1 2 Traffc Jam Ahead/Detour n Route Lst not actvated: ^ 3 Cancel cannot be selected 2 Traffc Jam Ahead/Detour n Route Lst actvated: Cancel s hghlghted 3 It s possble to block route sectons n the route lst ( page 183) Press ) at any tme. The man detour menu wll appear. Turn the rght-hand rotary/push-button v to hghlght the desred menu feld and press to confrm. Traffc jams are dentfed by the drver, not by the COMAND. If you swtch off COMAND for more than 30 mnutes durng actve route gudance, all manually entered traffc jams are deleted. 181

191 Navgaton Route gudance Traffc jam ahead If a traffc jam les ahead, you can block the route sectons followng the next ntersecton/the next turn-off. Turn the rght-hand rotary/push-button v to hghlght Traffc Jam Ahead... n the man detour menu and press to confrm. The traffc jam menu wll appear. COMAND suggests reasonable route sectons. Mnmum/maxmum length of detour s governed by the logcal groupng of route sectons. If addtonal detour segments are requred after the orgnal detour, they must be requested ndvdually. Enterng the length of the blocked route secton Increasng the blocked secton Turn the rght-hand rotary/push-button v to the rght. Decreasng the blocked secton Turn the rght-hand rotary/push-button v to the left. Calculatng detour Press the rght-hand rotary/pushbutton v. The route wll be re-calculated. An nformaton menu wll appear. Traffc jam menu 1 Length of the blocked route secton n mles Then COMAND contnues route gudance. You can also select Traffc Jam Ahead durng the course of a detour. The current detour wll then be cancelled. 182

192 Navgaton Route gudance Detour n route lst Turn the rght-hand rotary/push-button v to hghlght Detour n Route Lst n the man detour menu and press to confrm. The message The route lst s beng calculated wll appear. Then the route lst wll appear. Dsplayng an entry n full n a wndow Press u. Press u agan to remove the wndow. Route lst 1 Street cannot be blocked off 2 Symbol + : street contans several sectons whch can be blocked off 3 Blocked street wll appear n red 183

193 Navgaton Route gudance Callng detaled route lst Detaled route lst 4 Symbol - - sectons of a road are dsplayed Press +. The detaled route lst wll appear. Blockng off several streets/street sectons Turn the rght-hand rotary/push-button v to the rght. Wth each turn, you wll block another secton. The road name wll appear n red. Undong street block Turn the rght-hand rotary/push-button v to the left. The street name wll appear n black agan. Swtchng back to the route lst Press,. The symbol + appears n front of the street secton. The blockng functon s stll actve. Cancelng blockng functon, do not recalculate the route Press *. The traffc jam menu wll appear. Endng the blockng functon, re-calculatng the route wth the blocks selected Press the rght-hand rotary/pushbutton v. COMAND re-calculates the route n the prevously selected calculaton mode. A correspondng message wll appear. Then the symbol dsplay wll appear agan and COMAND wll contnue route gudance. 184

194 Navgaton Route gudance Resettng functons 1 Deletes a way pont 2 Cancels a detour (traffc jam ahead) 3 Cancels a detour (street sectons blocked n the route lst) 4 Resets all functons Press r. A selecton menu wll appear. Turn the rght-hand rotary/push-button v to hghlght the desred menu feld and press to confrm. COMAND wll re-calculate the route usng the prevously selected calculaton mode. You wll see the correspondng nformaton. The correspondng nformaton wll appear on the dsplay. If you have not selected any way pont ( page 178) or detour ( page 181) menu felds 1 to 4 are shaded out and cannot be selected. 185

195 Navgaton Route gudance Devatng from the calculated route If applcable, the message NEW ROUTE wll appear along wth an arrow outlne ndcatng the drvng drecton. After the new calculaton has been successfully completed, COMAND contnues route gudance. The arrow ndcatng the drvng drecton wll appear as usual. Drvng on a non-dgtzed road If the symbol dsplay s actve, the map showng the current vehcle locaton relatve to the route wll appear after 5 seconds. COMAND automatcally changes back to the symbol dsplay f a known road s used agan. If you devate from a recommended route, the COMAND automatcally calculates a new route from the current vehcle locaton to the requested destnaton. 186

196 Navgaton Route gudance Interruptng route gudance durng a journey The car s parked for longer than 2 hours and the remanng dstance to the destnaton s more than 0.3 mles. Inqury menu After COMAND has been swtched on agan, the nqury menu shown above appears. Recalculatng and contnung the actve route gudance Press the rght-hand rotary/pushbutton v and confrm Yes. You wll hear the voce output The route s beng recalculated. Cancelng actve route gudance Turn the rght-hand rotary/push-button v to hghlght No and press to confrm. The destnaton nput menu wll appear. The nqury menu can also appear f the current stop-over s entered. If the journey s nterrupted for less than 2 hours, actve route gudance wll be contnued automatcally. You wll hear the voce output The route s beng recalculated. If the remanng dstance to the route s less than 0.3 mles, route gudance ends and the man destnaton nput menu wll appear. The message Manual route exclusons have been reset wll appear, f you have selected a detour and the COMAND was swtched off for longer than 30 mnutes durng actve route gudance. Manually entered traffc jams are deleted. Press * to remove the message. 187

197 Navgaton Route gudance Arrvng at destnaton Then the man destnaton nput menu appears and you can now enter another destnaton. You wll also hear voce outputs and see dsplay messages when you approach and arrve at way ponts. When you reach the destnaton, you wll see the destnaton flag. You wll hear the voce output You have reached your destnaton. 188

198 Navgaton Route gudance Actvatng audo system Durng route gudance (you see ether symbol or map dsplay) you can select another COMAND system by pressng the correspondng key. The man menu of the selected audo source wll appear and you wll e.g. hear the rado. Route gudance and the navgaton s voce output reman actve. The voce output s added to the audo playback. You can ndvdually adjust the volume levels for voce output and audo playback ( page 64). Press c. The man rado menu wll appear. The staton last tuned to wll begn to play. Selectng a staton ( page 30). Returnng to navgaton system Press b. P Actvatng audo functons Durng route gudance, you can operate an audo source that s actve n the background. Although the optons are lmted, you can operate the audo source wthout havng to fully swtch to the correspondng system. 1 A wndow s shown n the symbol or map dsplay, provdng detals about the actve audo source 189

199 Navgaton Route gudance Removng the wndow Startng manual search CD mode s actve Ths s done automatcally after 3 seconds. or Press *. The rado s actve Selectng a memorzed staton from the respectve memory (FM, AM or WB) Press number keys 1 through 0. Performng staton seek Press g or h longer than 2 seconds. The search run wll start n the desred drecton - frequency ranges FM, AM or WB. Selectng CD wth number keys 0 CD drve 1-6 CD changer Selectng prevous/next track Press g or h brefly. Skppng backwards/forwards Hold g or h longer than 2 seconds. Press g or h brefly. 190

200 Navgaton Route gudance Cancelng route gudance Contnung route gudance Press *. or Turn the rght-hand rotary/pushbutton v to hghlght No and press to confrm. The map or the symbol dsplay wll appear. Whle the map or symbol dsplay s actve, press b. A query wll appear. Press the rght-hand rotary/pushbutton v and confrm Yes. The man destnaton nput menu wll appear. 191

201 Navgaton Destnaton memory Destnaton memory You can save frequently used destnatons n the destnaton memory Turn the rght-hand rotary/push-button v to hghlght Destnaton memory n the man destnaton nput menu and press to confrm. The man destnaton memory menu wll appear. Retrevng a destnaton from the destnaton memory 5 6 Man destnaton memory menu P Info/status lne 2 Retreves destnaton from the destnaton memory for destnaton nput 3 Sorts destnaton memory 4 Deletes destnaton n the destnaton memory 5 Saves the current destnaton 6 Saves current vehcle locaton wth a name P Press the rght-hand rotary/pushbutton v to confrm Dsplay destnatons... n the man destnaton memory menu. After the message Complng sorted destnaton lst, the destnaton memory wll appear. 192

202 Navgaton Destnaton memory Turn the rght-hand rotary/push-button v to hghlght the desred entry and press to confrm. Then calculate the route ( page 159). Dsplayng longer entres ( page 183). Savng the current destnaton When you have entered or reached the current destnaton, you can save the destnaton n the destnaton memory. Input menu 1 Name entered 2 Savng the destnaton wthout enterng a name In the selecton menu Destnaton Entry ( page 146) Turn the rght-hand rotary/push-button v untl Save s hghlghted and press to confrm. In the man destnaton memory menu Turn the rght-hand rotary/push-button v untl Save current destnaton... s hghlghted and press to confrm. An nput menu wll appear. If all memory locatons are used, the message Destnaton memory s full wll appear. Press the rght-hand rotary/ push-button v to remove the message. The man destnaton memory menu wll appear. Deletng a destnaton n destnaton memory ( page 197). 193

203 Navgaton Destnaton memory Savng wth a name You can enter a name for the current destnaton. Turn the rght-hand rotary/push-button v to hghlght the desred character and press to confrm. The letter you have selected appears n the nput lne. 3 Enter the other letters untl the name s complete. Press the rght-hand rotary/pushbutton v longer than 2 seconds. The destnaton memory wll actvate. The current destnaton has been saved wth a name and appears n red. P Turn the rght-hand rotary/push-button v to move the entry to the desred pont n the lst and press to confrm. Savng after destnaton has been entered: 3 Startng route gudance P Press the rght-hand rotary/pushbutton v to confrm 3. Route gudance begns. The man destnaton entry menu wll appear, Start Gudance... s hghlghted. Savng on arrval at destnaton: The man destnaton entry menu wll appear. 194

204 Navgaton Destnaton memory Savng wthout a name If you do not wsh to enter a name, COMAND wll save the destnaton wth cty and street name. Whle you are n the nput menu, turn the rght-hand rotary/push-button v to hghlght Save wthout names and press to confrm. The destnaton memory wll appear. Savng the current vehcle locaton Wth ths functon, you can save the current vehcle locaton n the destnaton memory. Enter a name so you wll be able to retreve t at a later date. Turn the rght-hand rotary/push-button v to hghlght Save current locaton... n the man destnaton memory menu and press to confrm. The nput menu Save Locaton wll appear. Enter a name. Then actvate the destnaton memory and save the poston n the desred memory locaton, see Savng wth a name. The man destnaton nput menu wll appear. 195

205 Navgaton Destnaton memory Sortng destnaton memory Turn the rght-hand rotary/push-button v to move the entry to the desred poston and press to confrm. The entry s saved at that locaton. The entry s shown n black agan. The man destnaton memory menu s reactvated automatcally. P Turn the rght-hand rotary/push-button v to hghlght Sort destnatons... n the man destnaton memory menu and press to confrm. P Turn the rght-hand rotary/push-button v to hghlght the desred entry and press to confrm. The entry s now shown n red. After the message Complng sorted destnaton lst, the destnaton memory wll appear. 196

206 Navgaton Destnaton memory Deletng a destnaton Turn the rght-hand rotary/push-button v to hghlght the entry you wsh to delete and press to confrm. The nqury Do you really want to delete the destnaton? wll appear. Turn the rght-hand rotary/push-button v to hghlght Yes and press to confrm. If you do not want to delete the destnaton Turn the rght-hand rotary/push-button v to hghlght No and press to confrm. The destnaton memory wll appear. Actvatng the man destnaton memory menu P Turn the rght-hand rotary/push-button v to hghlght Delete Destnaton n Memory n the man destnaton memory menu and press to confrm. The entry has been deleted from the lst. The followng entres wll each move up one poston. The delete functon s stll actve. Press *. After the message Complng sorted destnaton lst, the destnaton memory wll appear. 197

207 Navgaton Settngs Settngs COMAND normally determnes the vehcle locaton automatcally wth the GPS. In exceptonal cases, ths may not be possble. You can then enter the current vehcle locaton manually n connecton wth an ntersecton. Enterng the vehcle locaton Turn the rght-hand rotary/push-button v to hghlght Settngs n the man destnaton nput menu and press to confrm. Turn the rght-hand rotary/push-button v to hghlght Locaton... and press to confrm. The nput menu to enter the cty wll appear. Enter the cty/suburb and then the street and select the requred entres from the correspondng lst. See Enterng destnaton address ( page 141). After you have selected the street, you wll see a prompt for the ntersecton. Turn the rght-hand rotary/push-button v to hghlght the approprate cross street and press to confrm. The nput menu Locaton/Intersecton wll appear. Locaton s ahead or behnd an ntersecton Turn the rght-hand rotary/push-button v to the rght (locaton s ahead) or to the left (locaton s behnd) and press to confrm. The message Chosen locaton accepted wll appear. Press the rght-hand rotary/pushbutton v to confrm. 198

208 Navgaton Settngs Calbraton In order to ensure an exact fx on poston, you have to calbrate COMAND by enterng the correct tre nformaton whenever tres are changed. Mercedes-Benz recommends that you have tres changed by an authorzed Mercedes-Benz Center. Turn the rght-hand rotary/push-button v to hghlght Settngs n the man destnaton nput menu and press to confrm. A lst of optons wll appear. Menu Settngs 1 Actvate menu Calbraton Turn the rght-hand rotary/push-button v to hghlght 1 and press to confrm. The menu Calbraton wll appear. 2 Enter the tread depth and the tre type 3 Return to the man destnaton nput menu Press the rght-hand rotary/pushbutton v to start calbraton. A lst of optons wll appear. 199

209 Navgaton Settngs Press the rght-hand rotary/pushbutton v longer than 2 seconds to confrm the entry. The man destnaton nput menu wll appear. 4 Tread depth 4 mm (3/16 n.) 5 Tread depth < 4 mm (3/16 n.) Turn the rght-hand rotary/push-button v to hghlght the desred menu feld and press to confrm. An nput menu wll appear. Enter the new tre type Enter the front axle tre parameters. Turn the rght-hand rotary/push-button v to hghlght the aproprate dgts one by one and press to confrm. 200

210 Info Servces*/System settngs Info Servces* System settngs Auxlary audo source 201

211 Info Servces*/System settngs Info Servces* In chapter Info Servces/System settngs you wll fnd detaled nformaton on the followng topcs: Requestng and dsplayng Info Servces Ths functon s not avalable n some countres. Adjustng the brghtness Selectng the language for the menu text dsplays and the voce output Settng the date and tme Selectng beep tones Settng the dsplay dmmng characterstcs (day and nght dsplay) Resettng all settngs to the factory settngs Swtchng an auxlary audo source on and off Info Servces* If you have not done so already, please famlarze yourself wth these functons by readng the chapter At a glance ( page 6). Requestng and dsplayng Info Servces When you subscrbe to Info Servces, you can download nformaton drectly to your COMAND. You can select from news, weather, sports, stocks, and calendar remnders. To personalze your selectons, vst or call FOR-MERCedes. Before you can use Info Servces, Tele Ad must be actvated at the Response Center and Info Servces selected. Man servce menu 1 New nformaton servce s requested from Response Center 2 Shows date and tme of the message 3 The man settngs menu wll appear ( page 205) 202

212 Info Servces*/System settngs Info Servces* Press ( n any menu. The man servce menu wll appear. The characters are dsplayed n lght grey In 1 Durng an actve request transmsson In 2 If no nformaton s avalable You wll hear a beep tone f there s a new ncomng message. There are three ways to cancel the request and swtch to a man menu, e.g. rado man menu: Press the rght-hand rotary/pushbutton v and confrm Cancel. Press *. or Press the rght-hand rotary/pushbutton v to confrm 1. New nformaton servce s requested from the Response Center. 4 Ths message appears 5 Cancels the request Automatcally after 15 seconds. 203

213 Info Servces*/System settngs Info Servces* If nformaton cannot be retreved, one of the followng messages wll be dsplayed: Data Connecton Cannot be Establshed Request has faled because Response Center cannot be accessed. Try agan later. No Cellular Connecton Avalable Vehcle may be n a cellular weak sgnal area. Try agan later. Cellular System Busy Request has faled because cellular system s busy. Try agan later. Data transmsson falure Request has faled because a data transfer error has occured. Try agan later. Tele Ad Call n Progress Request has faled because SOS or Roadsde call s n progress. Tele Ad. Please vst workshop A hardware malfuncton has been detected. Contact your Mercedes- Benz Center. To subscrbe to nformaton servces dal phone number You have not yet subscrbed to servce. No nformaton avalable at ths tme. Press SVC. No new nformaton s avalable. Warnng G A drver s attenton to the road must always be hs/her prmary focus when drvng. For your safety and the safety of others, we recommend that you pull over to a safe locaton and stop the vehcle before requestng or recevng any nfo servces. 204

214 6 Dsplays the new message 7 Swtches back to the man menu There s more than one message Press the rght-hand rotary/pushbutton v to move to the next page. Actvatng the man servce menu Press *. Swtchng back to e.g. rado man menu Turn the rght-hand rotary/push-button v to hghlght No and press to confrm. System settngs Actvatng the man settngs menu Man system settngs menu 1 Date and tme You can select the tme format ( page 214) 2 Adjusts the brghtness 3 Actvates Settngs menu 4 Swtches an auxlary audo source on ( page 218) 5 Country settng, wth a tme zone ( page 210) Info Servces*/System settngs System settngs Press (. The man servce menu wll appear. Turn the rght-hand rotary/push-button v to hghlght System Settngs and press to confrm. The man system settngs menu wll appear. You wll see nformaton 5 f the clock has been set to GPS recepton and f a country, e.g. USA and a tme zone was selected. 205

215 Info Servces*/System settngs System settngs 1 Prevous settngs 2 Current settngs Adjustng the brghtness 2 1 P Press the rght-hand rotary/pushbutton v to confrm Brghtness. The Brghtness menu wll appear. Darkenng screen Turn the rght-hand rotary/push-button v to the left. The trangle 2 wll move to the left. Brghtenng screen Turn the rght-hand rotary/push-button v to the rght. The trangle 2 wll move to the rght. Confrmng new settngs Press the rght-hand rotary/pushbutton v. The man system settngs menu wll appear. Actvatng settngs menu Settngs menu 1 Selectng the language Navgaton CD must be nserted 2 Settng date and tme ( page 208) 3 Swtchng beep tones on and off ( page 215) 4 Settng the dsplay dmmng characterstcs (day and nght dsplay) ( page 216) 5 Resettng all settngs to the factory settngs ( page 217) 206

216 Info Servces*/System settngs System settngs Turn the rght-hand rotary/push-button v to hghlght Settngs n the man system settngs menu and press to confrm. The settngs menu wll appear. Selectng the language The language affects the menu text dsplays and the voce output durng route gudance. Press the rght-hand rotary/pushbutton v to confrm Language... n the settngs menu. The languages lst wll appear. Turn the rght-hand rotary/push-button v to hghlght the desred language and press to confrm. COMAND dsplays the message Loadng the [name of language] language and loads the selected language. You wll hear the correspondng voce output. After that, the man system settngs menu wll appear wth the dsplay text n the language selected. 1 Current language settng appears n red 2 Page back, f the arrow s flled n 3 Page forward for more languages 207

217 Info Servces*/System settngs System settngs You can select the followng languages Adopt from Instrument Cluster COMAND wll use the same language as s set n nstrument cluster Deutsch Englsh (metrc) Dstance measured n km, speed n km/h Englsh (mperal) Dstance measured n yards and mles, speed n mles per hour (mph) Español Franças Italano Nederlands COMAND s equpped wth an ntegrated clock, whch t shows n the man system settngs menu. Automatcally COMAND automatcally sets date and tme f the GPS tme s receved. However, you can make the followng adjustments: Settng date and tme The clock dsplays e.g. the estmated tme of arrval at the destnaton durng route gudance. Set the tme n ncrements of 30 mnutes ( page 209) Set the tme by selectng a country and the tme zone ( page 210) Manually You must always set the clock manually ( page 213), f COMAND does not receve a GPS tme the clock has been dsconnected from the vehcle battery the dates of the change between summer and wnter tme are not avalable 208

218 Info Servces*/System settngs System settngs Settng the tme n ncrements of 30 mnutes You can set the the tme to any local tme (tme zone) n ncrements of 30 mnutes. Turn the rght-hand rotary/push-button v to hghlght Date/Tme... n the settngs menu and press to confrm. The menu dsplays the date and the tme, mnutes are hghlghted. Actvatng the settng mode P COMAND receves GPS tme 2 Settng the clock (ncrements of 30 mnutes) 3 Selects the country and the tme zone ( page 210) 4 Selects the tme format ( page 214) P Press the rght-hand rotary/pushbutton v. Settng mode s actve, the mnutes wll appear n red. 209

219 Info Servces*/System settngs System settngs Alterng the tme Settng the clock ahead Turn the rght-hand rotary/pushbutton v to the rght. Each clck wll move the tme 30 mnutes ahead. Settng the clock back Turn the rght-hand rotary/pushbutton v to the left. Each clck wll move the tme 30 mnutes back. Cancelng settng mode Press the rght-hand rotary/pushbutton v. The mnutes appear n black letterng. Swtchng back to the man system settngs menu Press *. or Press the rght-hand rotary/pushbutton v longer than 2 seconds. You wll see the new tme. Selectng the country and the tme zone You can select among several countres. If a country has multple tme zones, e.g. Canada and USA, you can select the applcable tme zone. COMAND wll ndcate ths nformaton n the man system settngs menu. 1 Input lne 2 Actvatng country lst 210

220 Info Servces*/System settngs System settngs Turn the rght-hand rotary/push-button v to hghlght Country (Tme)... n the settngs menu and press to confrm. Selectng tme zone An nput menu wll appear. Turn the rght-hand rotary/push-button v to hghlght the ntal letter for the country name and press to confrm. The letter appears n 1. Enter addtonal letters. Press the rght-hand rotary/pushbutton v longer than 2 seconds. or Turn the rght-hand rotary/push-button v to hghlght Country Lst and press to confrm. The country lst appears. Country lst 3 Country entered prevously 4 Page back for more countres 5 Page forward for more countres Turn the rght-hand rotary/push-button v to hghlght the desred country n the lst and press to confrm. The tme zone lst appears for countres wth several tme zones (e.g. Canada, USA). Press the rght-hand rotary/pushbutton v longer than 2 seconds to confrm the country. The Tmezone menu wll appear showng the avalable tme zones. Turn the rght-hand rotary/push-button v to hghlght the requred tme zone and press to confrm. Then set the automatc tme converson as descrbed next. 211

221 Info Servces*/System settngs System settngs Automatc tme converson Poston 1 Automatc summer/wnter tme Meanng The tme n ths country/tmezone changes, the dates of the tme change are known Press the rght-hand rotary/pushbutton v. Checkmark P ndcates that automatc tme change s actve. Press the rght-hand rotary/pushbutton v longer than 2 seconds. 1 P Summer tme The dates of the tme changs are not known, the change to wnter tme must be made manually The settngs are adopted and the man system settngs menu wll appear. 1 Settng change summer/wnter tme 212

222 Info Servces*/System settngs System settngs Manually settng date and clock You must manually set the date and clock, f COMAND does not receve a GPS tme the clock has been dsconnected from the vehcle battery the dates of the change between summer and wnter tme are not avalable Date/tme menu 1 Day, month, year, hours, mnutes Day s hghlghted when the menu appears 1 P Turn the rght-hand rotary/push-button v to hghlght Date/Tme... n the settngs menu ( page 206) and press to confrm. The menu dsplays date and tme. Settng Press the rght-hand rotary/pushbutton v. The day appears n red letters, settng mode s actve. Movng the day forward or back Turn the rght-hand rotary/push-button v to the rght or left. Press the rght-hand rotary/pushbutton v. The day appears n black letters, settng mode s swtched off. The cursor moves one poston to the rght. Repeat the operatng steps to subsequently change month, year, hours and mnutes. 213

223 Info Servces*/System settngs System settngs Adoptng settngs Press the rght-hand rotary/pushbutton v longer than 2 seconds. The man system settngs menu wll appear wth the changed settngs. If you have selected an nvald settng, the message Invald nput wll appear. Selectng the tme format 1 Date dsplay n day, month format 2 Date dsplay n month, day format 3 Tme dsplay n 24-hour format 4 Tme dsplay n 12-hour format P Settng s actve Q Settng s not actve In the Date/Tme menu Turn the rght-hand rotary/push-button v to hghlght Tme format and press to confrm. The Tme format menu wll appear. Settng Turn the rght-hand rotary/push-button v to hghlght the desred entry and press to confrm. A checkmark wll appear P. If the 12-hour format s selected, ether AM (ante merdem) or PM (post merdem) wll appear after the tme. 214

224 Info Servces*/System settngs System settngs Adoptng settngs Press the rght-hand rotary/pushbutton v longer than 2 seconds. The man system settng menu wll appear. or Press *. The Date/Tme menu wll appear. Swtchng beep tones on and off Turn the rght-hand rotary/push-button v to hghlght Beeps n the settngs menu and press to confrm. The Beeps menu wll appear. Turn the rght-hand rotary/push-button v to hghlght 1 or 2 and press to confrm. The beep selected s swtched on or off accordngly. Acknowledgement beep 1 Acknowledgement beep 2 Info beep P Tone s swtched on Q Tone s swtched off You wll hear ths beep f you confrm a functon or select an entry. Info beep You wll hear ths beep f COMAND provdes nformaton, e.g. navgaton turn s approachng. 215

225 Info Servces*/System settngs System settngs Settng the dsplay dmmng characterstcs (day and nght dsplay) 1 Changes by pressng Ä 2 Changes by pressng Ä and ambent lght sensor P Settng actve Q Settng not actve If the settngs menu ( page 206) s dsplayed Turn the rght-hand rotary/push-button v to hghlght Dsplay (day/nght)... and press to confrm. The Dsplay (Day/Nght) menu wll appear. The settng 2 s actve, when callng up the menu for the frst tme. Turn the rght-hand rotary/push-button v to hghlght the desred settng and press to confrm. The desred settng s actve. Settng 2 has been selected When the lght sensor senses low ambent lghtng condtons, the screen wll change to nght dsplay. Changng the dsplay Press Ä to access the followng dsplays n successon. Day dsplay Nght dsplay Screen off and the Day dsplay agan 216

226 Info Servces*/System settngs System settngs Resettng all settngs to the factory settngs If the settngs menu s dsplayed Turn the rght-hand rotary/push-button v to hghlght Factory settngs and press to confrm. An nqury menu wll appear. Yes s hghlghted. Acceptng the factory settngs Press the rght-hand rotary/pushbutton v. A screen wth the factory settng wll appear for 8 seconds. The man system settngs menu s reactvated. The factory settngs are: Acknowledgement beep off Info beep off Language Englsh (mp.) Tme dsplay 24 h Date format DD.MM (day, month) If you do not wsh to reset to factory settngs Turn the rght-hand rotary/push-button v to hghlght No and press to confrm. The man system settngs menu wll appear. 217

227 Info Servces*/System settngs Auxlary audo source Auxlary audo source Connectng Mercedes-Benz recommends that any auxlary audo unt s nstalled and connected by an authorzed Mercedes- Benz Center. The auxlary audo source (e.g. tape recorder) wll be nstalled n the glove compartment of your vehcle and connected to the socket avalable for ths purpose. You wll requre a separate connectng cable for ths. Refer to the seperate operatng nstructons for nformaton on how to operate the auxlary audo source (e.g. tape player). COMAND wll play back voce outputs durng route gudance even f the auxlary audo source has been swtched on. It s possble to use the telephone whle the auxlary audo source s n operaton. Swtchng auxlary audo source on 1 P Adjusts sound settngs ( page 63) 218