HR Brief description. 1. Scope of delivery

Size: px
Start display at page:

Download "HR Brief description. 1. Scope of delivery"

Transcription

1 2. Bref descrpton 2443 The HR92 radator controller s certfed by eu.bac.. Scope of delvery HR92 Wreless Radator Controller The radator controller packagng contans: 2 HR92 s an electronc radator controller wth a modern desgn. Because of the wreless communcaton wth a frequency of 868 MHz the controller can be easly ntegrated n heatng systems such as evohome to control the room temperature. User-frendly Large adjustable dsplay wth backlght. Dsplay of nformaton n the dsplay usng symbols and text. Parameters can be set ndvdually. Manual temperature modfcaton (effectve untl the next swtchng pont) possble at any tme. Mountng The radator controller fts on the most common radator valves of the type M3x.5. Further adapters are avalable as accessores. An external wndow contact can be connected optonally. Energy savng features Wth the wndow functon, the radator valve s closed when ventlatng the room. If an external wndow contact s used, the radator valve s closed when a wndow s open. 3 4 CAUTION ffuse the radator controller only n accordance wth these operatng nstructons. ffdo not let chldren play wth the radator controller. Radator controller wth valve baseplate M3 x.5; batteres ncluded 2 Dsplay support 3 Valve adapter type Danfoss RA 4 Screws for securng radator controller and battery compartment WARNING Danger of suffocaton! ffkeep packagng materals away from chldren. EN

2 3. Devce overvew Rado sgnal dsplay Operatng elements and dsplay Dsplay 5 3 Meanng Feld strength excellent Feld strength good Feld strength weak Dsplays that the room setpont was changed manually 2 Operaton lock 3 Battery status 4 Temperature dsplay/parameter nformaton 5 Text dsplay, 9 characters 6 Info button, for dsplayng the room (zone) nformaton; Functon button, for bndng and confgurng 7 Adjustment dal 8 Rado sgnal (feld strength) 9 Rado communcaton dsplay Rado communcaton error Battery dsplay Battery status Meanng Batteres fully charged Batteres half charged Mountng Ready to operate n three steps: Insert batteres and set language Establsh rado connecton Mount on radator controller FINISHED Insertng/changng batteres The radator controller s set for the followng battery type: 2 alkalne cells.5 V; type LR6, AA, AM3 You can nstead use the followng batteres or rechargeable batteres: Lthum.5 V; type LR6, AA, AM3 NMH.2 V; type LR6, AA, AM3 If lthum or NMH batteres are used, Parameter 9 has to be adapted, see Secton 5. Always change batteres n pars. If the batteres are too weak, the radator controller opens the radator valve completely. After the batteres have been replaced, the rado connecton to the central operatng devce s restored automatcally. Batteres have to be replaced soon Flashng dsplay: Batteres are dead and have to be replaced 2

3 WARNING The language selecton s only dsplayed durng ntal commssonng. The battery lfe of new alkalne cells amounts to approx. 2 years. The batteres need changng when the symbol flashes. All the settngs are retaned when the batteres are changed. Exploson hazard! ffnever charge non rechargeable batteres. ffnever short-crcut batteres or throw them nto fre. ffdspose of used batteres ecologcally Pull off the adjustment dal. To do so, start at the notch on the bottom of the devce. 2. If used, unscrew any fastenng screws from the battery compartment. 3. Release the lock and fold out battery sprng. The battery compartment s now accessble. 4. Insert the batteres. Ensure that the polarty "+" and " " s correct. 5. Fold down the battery sprng and latch t n. 6. Opton: Secure the battery sprng wth the fastenng screws to secure the batteres aganst theft. 7. Place the adjustment dal back on. Frst the software verson number and then the language englsh s dsplayed. 8. If desred, use the adjustment dal to select a dfferent language. 9. Confrm the selected language wth the button Establshng rado connecton The radator controller HR92 communcates wth the central operatng devce by rado usng the frequency of 868 MHz. To ths purpose the connecton between the HR92 and the central operatng devce has to be establshed frst. Ths process s called BINDING. In the case of preconfgured devces bndng has already been carred out n the factory. If bndng has not yet been carred out, unbound s dsplayed after has been pressed. Bndng must frst be actvated at the HR92 so that the rado sgnal can be receved. Subsequently bndng has to be actvated at the central operatng devce. Please read the operatng nstructons of your central operatng devce for further nformaton about bndng. Actvatng bndng at the HR92 Carry out bndng of the radator controller near the fnal mountng locaton.. Press the button brefly. unbound s dsplayed. 2. Hold the button pressed for 5 seconds. bnd s dsplayed. 3. Press the button brefly. bndng s dsplayed and the rado symbol appears. Actvatng bndng at the central control devce fto f actvate bndng at the central control devce: see the assocated nstructons. 3

4 Bndng at the HR92 The rado symbol flashes durng bndng. If bndng was successful, success s dsplayed. Afterwards the man dsplay s shown. When sync s shown n the dsplay, the radator controller s synchronzng wth the central operatng devce. HR92 receves the data from the central operatng devce. Synchronzaton can take up to 4 mnutes untl the current room setpont temperature s dsplayed at the HR92. If BINDING s not successful, t s termnated automatcally after approx. mnutes. or To cancel BINDING, select Ext usng the adjustment dal and confrm wth the button. If several HR92 radator controllers n one room (zone) are to be controlled by the central operatng devce, t s possble to actvate BINDING at all radator controllers smultaneously. BINDING then only has to be carred out once. Faled bndng/nsuffcent data transfer Bndng has faled when the rado symbol dsappears and faled s dsplayed. The data transfer output may be nsuffcent. Ths can be caused by metallc objects or further rado devces. fensure f that the dstance to rado devces such as rado headphones, cordless phone, etc. amounts to at least m. fensure f that the dstance to metallc objects s suffcent. fif f rado nterference cannot be elmnated, select a dfferent mountng locaton for the room unt and repeat bndng. Clearng bndng at the HR92. Press the button brefly. 2. Hold the button pressed for 5 seconds. 3. Select bnd usng the adjustment dal and keep the button pressed untl cleared s dsplayed. Bndng s deactvated. Rado test. Press the button brefly. 2. Hold the button pressed for 5 seconds. 3. Select rf check usng the adjustment dal and confrm wth the button. checkng s dsplayed (flashng) n the dsplay. checkng The radator controller s ready to receve rado sgnals from the central operatng devce. Please read the operatng nstructons of your central operatng devce for further nformaton about the rado test. The feld strength s dsplayed as a bar and a number whle the rado sgnal s beng receved. 5 sgnal 5 bars Feld strength excellent 3 bars Feld strength good bars Feld strength weak Rado test at operatng devces wth 2-way communcaton If the central operatng devce can transmt and receve (2-way communcaton), lke the evotouch, the feld strength can be quered drectly at the radator controller wthout actvatng the rado test n the central operatng devce.. Press the button brefly. 2. Hold the button pressed for 5 seconds. 3. Select rf check usng the adjustment dal and confrm wth the button. checkng s dsplayed (flashng) n the dsplay. 4. Press the button agan. The feld strength s dsplayed as a bar and a number whle the rado sgnal s beng receved. 4

5 Interruptng the rado test The rado test s termnated automatcally after approx. mnutes. or fselect f ext usng the adjustment dal and confrm wth the button. Rado communcaton error If the exclamaton mark and the rado symbol flash durng normal operaton, an error has occurred durng rado communcaton. The room setpont temperature of the HR92 radator controller s changed automatcally to 2 C. frestore f rado communcaton to the central operatng devce, see Secton 7. Mountng the radator controller The radator controller can be mounted on all common thermostatc valves wth an M3 x.5 connecton wthout dranng system. Selectng the adapter The radator controller fts on common radator valves of the type M3 x.5. Adapters are requred for some valve types.. Check whether an adapter s requred and, f necessary, select the approprate adapter. Brand Illustraton Adapter Honeywell- Braukmann, MNG, Hemeer, Oventrop valves M3 x.5 Danfoss RA Not requred Suppled Danfoss RAV * WARNING Prevent damage to the radator controller through humdty and mosture! ffmount the radator controller ndoors only. ffprotect the radator controller aganst humdty, mosture, dust, drect sunlght or exposure to excessve heat. Danfoss RAVL * Removng the old thermostat head. 2. * can be ordered under EVA-Danfoss 2. Slde the adapter onto the radator valve and turn t untl you feel t clck nto place. 3. If necessary, screw the adapter tght wth a screw.. Turn the old thermostat head ant-clockwse untl t stops and loosen the mountng rng. 2. Remove the old thermostat head from the radator valve. 5

6 Mountng the valve baseplate b a 3. Lock the radator controller n the end poston. To do so, push the slde towards. After approx. mnute cycl (self-test) s dsplayed. Afterwards the radator controller changes to normal operaton. 225 C. Separate the valve baseplate from the radator controller. To do so, push the slde towards. The radator controller only operates f t s locked correctly n the end poston. 3. FINISHED! The radator controller now controls the room temperature n accordance wth the specfcaton of the central operatng devce Turn the adjustment dal of the valve baseplate antclockwse untl t stops. 3. Put the valve baseplate onto the radator valve or the adapter and tghten by hand (wthout tools!). Securng the radator controller The radator controller and the batteres can be secured aganst removal by usng the suppled screws. Mountng the radator controller Ensure that the slde on the radator controller s n the open poston. 2. Put the radator controller onto the valve baseplate so that the ndentaton latches n and s no longer vsble. 6

7 Settng the poston of the dsplay In order to mprove the legblty the dsplay of the radator controller can be tlted to dfferent postons (, 2, 3, 4 ). The angle of 4 can be fxed wth the suppled dsplay support.. 2. Mountng. Lft the dsplay and set t to the desred angle. 2. If desred, tlt the dsplay by 4 and slde the dsplay support from above between the dsplay and the housng untl t latches n. Unmountng fpress f the dsplay support n at the back and remove t upwards. Connectng an external wndow contact The floatng external wndow contacts HCA3 can be connected to the HR92 radator controller. The cable ACS9 s requred to connect the external wndow contact. Mcro B mn-plug / open ends 2 m long Not ncluded n the scope of delvery Operaton wth wndow contact When the wndow s opened, the wndow contact s opened and the radator valve closes. When the wndow s closed agan, the radator controller returns to normal operaton. The frost-protecton functon ensures that the radator valve opens when the temperature drops below 5 C. If a cabled wndow contact s removed, Parameter has to be modfed to or, see Secton 5. Cable connecton fconnect f cable ACS9 as follows to the wndow contact HCA3: ACS9 whte black GND green Connectng the cable to the radator controller HR Remove the sde cover from the radator controller. 2. Insert the cable ACS9 nto the radator controller HR92. The radator controller recognses the connected wndow contact automatcally. 7

8 5. Basc settngs Overvew If requred, the 2 basc settngs (parameters) can be adjusted. Factory settngs have a grey background. Parameters marked wth an * are descrbed n more detal below. Par Meanng Language settng Englsh Deutsch Dansh Swedsh Norwegan Fnnsh Backlght * Deactvated Actvated Duraton of the wndow functon * Wndow functon not actve Valve opens at the latest after 3 mnutes Valve opens at the latest after 9 mnutes Senstvty of the wndow functon durng droppng room temperature *.2 (senstve) 2. (less senstve) Factory settng:.4 Senstvty of the wndow functon durng rsng room temperature *. (senstve) 2. (less senstve) Factory settng:.2 Settng the valve stroke * Standard valve stroke Full-stroke mode Temperature representaton n the dsplay * Set/programmed temperature (setpont temperature) Measured room temperature Temperature offset * To adjust the temperatures measured by the radator controller and n the room Factory settng: Par. 9 2 Settng Settng 2 2 Meanng Battery type Alkalne Lthum NMH (rechargeable batteres) Dsplay of the valve poston * No dsplay of the valve poston Momentary dsplay of the valve poston Wndow open functon * Off (no wndow functon) Auto (correspondng to Parameters 3-5) Cabled (wth floatng wndow contact) Restore to factory settng No reset Reset The bndng s retaned. Ext Changng parameters. Keep the button pressed for approxmately 5 seconds untl Parameter flashes (left-hand dgt). language The rght-hand dgt shows the current settng. The parameter s dsplayed addtonally n plan text. For example, the dsplay stands for Parameter (language) wth Settng (German). 2. Use the adjustment dal to select the desred parameter (left-hand dgt). 3. Press the button to edt the parameter. The current settng of the parameter flashes (rght hand dgt). 4. Use the adjustment dal to set the desred settng (rght-hand dgt) and confrm wth. The parameter beng edted flashes (left-hand dgt). 5. For the further parameters repeat Steps 2 to To ext the menu, select ext usng the adjustment dal and confrm wth the button. 8

9 Descrpton of the parameters Parameter 2 Backlght The dsplay has a backlght for readng the nformaton. The backlght s ON when the adjustment dal s turned or a button s pressed. The backlght swtches OFF f no acton s carred out at the radator controller for approx. 7 seconds n order to save battery power. Parameters 3 to 5 Wndow functon In order to save energy the radator controller closes the radator valve when you open a wndow resultng n a large drop of the temperature. When you close the wndow so that the temperature rses the radator controller opens the radator valve agan. When the duraton of the wndow functon (factory settng: 3 mnutes) has expred, the system controls to the current room setpont temperature agan. Frost protecton s ensured durng the wndow functon. Parameter 6 Valve stroke The radator controller operates wth the optmum valve stroke set n the factory. If the entre valve stroke s to be used or f the valve does not open completely, actvate the full-stroke mode. Parameter 7 Temperature representaton n the dsplay In the factory settng the room setpont temperature s dsplayed. Wth the settng "measured temperature" the measured room temperature s dsplayed. A changeover to the set temperature s carred out by turnng the adjustment dal or pressng the button. If requred, the temperature can now be reset. The dsplay returns to the measured temperature after approx. 3 seconds. Due to the heat nfluence of the radator the "measured temperature" dsplayed at the radator controller can dffer from the temperature measured at another pont n the room. Parameter 8 Temperature offset Snce the radator controller measures the room temperature n the area of the radator, t s possble that ths temperature devates from the temperature measured at a dfferent pont n the room. If, for example, 2 C s measured n the room and 2. C at the radator, ths effect can be compensated by an offset of. C. Parameter Dsplay of the valve poston When ths parameter s actvated (settng ""), the calculated valve poston ( % opened) s dsplayed momentarly. The man dsplay s shown agan after approx. 3 mnutes. To cancel, select ext and press the button. Parameter Wndow open functon If a wndow contact s connected, the parameter s set automatcally to "2" (cabled). The wndow functon s controlled by the wndow contact. If no wndow contact s connected, the settng "" or "" has to be selected. 6. Further functons Manual changng of the room setpont temperature The room setpont temperature can be changed at any tme by means of the adjustment dal. The changed room setpont temperature remans n effect untl the next swtchng pont. The symbol shows that the temperature was changed manually. The symbol extngushes when the next setpont s reached. By turnng the adjustment dal ant-clockwse untl off s dsplayed, the valve wll be closed permanently. Wth ths settng the tme program of the central operatng devce s no longer actve for ths radator controller, but frost protecton s guaranteed f the heatng s swtched on. 9

10 Dsplay of the room name If the central operatng devce can transmt the room name (zone name), lke the evotouch, the room name s dsplayed at the radator controller (max. of 9 characters). fpress f button. The room name (zone name) s shown brefly n the dsplay. 7. Help wth problems Error table Problem/ Dsplay Cause Remedy flashng Batteres flat Replace the batteres. Automatc montorng functons Wndow functon If you open a wndow causng the temperature to drop, the radator controller closes the radator valve n order to save energy. wndow s dsplayed. When the temperature rses agan, but at the latest after the set perod (factory settng: 3 mnutes), the radator controller opens the radator valve agan. You can also open the radator valve beforehand by turnng the adjustment dal. The senstvty of the radator controller to a temperature drop or temperature rse can be set, see Secton 5, Parameters 3 to 5. If a wndow contact s connected, the wndow functon reacts drectly to the openng and closng of the wndow, see Parameter. Valve protecton If the radator valve has not been opened once completely wthn the perod of 2 weeks, a self-test (forced operaton) s carred out. The radator controller opens the radator valve brefly on the subsequent Monday n order to prevent sezng. cycl s dsplayed. Frost protecton If the temperature drops below 5 C, the radator controller opens the radator valve untl the temperature rses above 6 C agan. Ths prevents the heatng system from freezng up. frost s dsplayed. The heatng must be swtched on to ensure the frost protecton functon. cons are flashng no sync e sensor e2 valve The radator stays hot Motor does not move The HR92 does not accept setpont changes from the central operatng devce. No rado communcaton Rado connecton nterrupted Parameters at the CM927/ DT92 operatng devce not set Devce defectve Motor cannot be moved The radator valve does not close fully Valve baseplate not nterlocked Valve closed permanently, off s dsplayed Check the rado connecton between the HR92 and the central operatng devce (rado test). Repeat the bndng procedure. Check the power supply to the central operatng devce and the HR92. Check the rado connecton CM927 operatng devce: Parameter 8: Set SU. DT92 operatng devce: Set Parameter SU (see correspondng nstructons). Replace the devce. Check the nstallaton. If approprate, remove the drt. Check the nstallaton. If approprate, change to full-stroke mode (Parameter 6). Set the slder to the poston. Use the adjustment dal to set the room temperature to the desred value. The next swtchng command from the central operatng devce wll then be executed from the HR92.

11 Emergency operaton when batteres are flat. Unlock the radator controller. To do so, push the slde at the radator controller towards. 2. Pull the radator controller off the valve baseplate. 3. Operate the radator valve by hand usng the adjustment dal on the baseplate. + Ambent condtons Humdty Standards 9. Dsposal For lvng area, busness and commercal areas as well as small busnesses 9 % rel. humdty EN554-:26 +A2:2 EN554-2:997 +A2:28 EN673-:2 EN :2 EN3-22 EN RoHS 2/65/EC CE Restorng the factory settng. Keep the button pressed for approxmately 5 seconds untl Parameter flashes (left-hand dgt). 2. Use the adjustment dal to select Parameter 2 (lefthand dgt) and Settng (rght-hand dgt). 3. Press the button to restore the factory settng. The bndng s retaned. 4. Use Ext to return to normal operaton. 8. Techncal data The radator controller has to be dsposed of n accordance wth WEEE drectve 22/9/EC Waste Electrcal and Electronc Equpment drectve. ffat the end of the product lfe dspose of the packagng and product n a correspondng recyclng centre. ffdo not dspose of the unt wth the usual domestc refuse. ffdo not burn the product. ffremove the batteres. ffdspose of the batteres accordng to the local statutory requrements and not wth the used domestc refuse. Type Protecton class Rado communcaton Supply voltage Power consumpton HR92 IP3 Control accuracy (CA).5 C Connecton to the radator M3 x.5 Ambent temperature 5 C Transport and storage temperature Dmensons Weght SRD ( MHz) RX Class 2 Range: typcally 3 m wthn resdental buldngs Battery type LR6, AA, AM3 Alkalne: 2 x.5 V Lthum: 2 x.5 V NMH: 2 x.2 V Standby: typ. 65 mw Control: typ. 24 mw 2 C 65 C 96 x 54 x 6 mm 85 g (wth batteres). Declaraton of Conformty Hereby Honeywell declares that ths HR92 s n complance wth the essental requrements and other relevant provsons of Drectve 999/5/EC.

12 . Bndng and rado test Overvew Press the button brefly Dsplay: Room nformaton Hold the button pressed for 5 seconds bnd rf check ext button Hold the button pressed untl button button bndng checkng flashes back to standard dsplay success cleared button * Rado sgnal from operatng devce back to standard dsplay Dsplay of the feld strength ext button back to standard dsplay Turn adjustment dal to the rght * Only at operatng devces wth 2-way communcaton, e.g. evotouch. Manufactured for and on behalf of the Envronmental and Combuston Controls Dvson of Honeywell Technologes Sàrl, ACS-ECC EMEA, Z.A. La Pèce 6, 8 Rolle, Swtzerland by ts Authorzed Representatve Honeywell Honeywell House Skmped Hll Lane Bracknell Berkshre RG2 EB Unted Kngdom The rght s reserved to make modfcatons that serve mprovement C

HR Brief description. 1. Scope of delivery

HR Brief description. 1. Scope of delivery 2. Bref descrpton. Scope of delvery HR92 Wreless Radator Controller The radator controller packagng contans: 2 HR92 s an electronc radator controller wth a modern desgn. Because of the wreless communcaton

More information

TheraPro HR Brief description. 1. Scope of delivery

TheraPro HR Brief description. 1. Scope of delivery . Bref descrpton 44 The HR9 radator controller s certfed by eu.bac.. Scope of delvery The radator controller packagng contans: Radator controller wth valve baseplate M x.5; batteres ncluded Dsplay support

More information

VRT014 User s guide V0.8. Address: Saltoniškių g. 10c, Vilnius LT-08105, Phone: (370-5) , Fax: (370-5) ,

VRT014 User s guide V0.8. Address: Saltoniškių g. 10c, Vilnius LT-08105, Phone: (370-5) , Fax: (370-5) , VRT014 User s gude V0.8 Thank you for purchasng our product. We hope ths user-frendly devce wll be helpful n realsng your deas and brngng comfort to your lfe. Please take few mnutes to read ths manual

More information

Strain Gauge Measuring Amplifier BA 660

Strain Gauge Measuring Amplifier BA 660 Stran Gauge Measurng Amplfer BA 660 Orgnal of the Manual BA660 / IP20 BA660 / IP66 Table of Contents 1. Safety precautons...2 1.1. Feld of applcaton...2 1.2. Installaton...2 1.3. Mantenance...2 2. Functon...2

More information

DALI gateway Tunable White Plus Order No

DALI gateway Tunable White Plus Order No Product documentaton Issue: 20.07.2017 21083100 DALI gateway Tunable Whte Plus Table of Contents Product documentaton 1 Product defnton... 4 1.1 Product catalogue... 4 1.2 Functon... 4 2 Mountng, electrcal

More information

DALI gateway Plus Order No

DALI gateway Plus Order No KNX Product documentaton Issue: 18.09.2015 21803200 DALI gateway Plus Table of Contents KNX Product documentaton 1 Product defnton... 4 1.1 Product catalogue... 4 1.2 Functon... 4 2 Installaton, electrcal

More information

1 Signs and symbols. 4 Installation 5 Active window 6 Commissioning Filter settings edali addressing. 6.4 Addressing. 7 General functions

1 Signs and symbols. 4 Installation 5 Active window 6 Commissioning Filter settings edali addressing. 6.4 Addressing. 7 General functions Table of contents 1 Sgns and symbols... 5 2 Changes ntroduced... wth masterconfigurator 2.10 6 3 Introducton... 7 4 Installaton... 8 5 Actve wndow... 10 6 Commssonng... 12 6.1 Selectng... an nterface 12

More information

1. REVIEW 2. DELIVERY SET

1. REVIEW 2. DELIVERY SET power status ON steps DIP test reset ON DIP off modes lght sensor / led sensor speed on sensor 2 speed off on/off delay pause to off REVIEW LED lghtng devce s desgned for automatc lghtng of starway steps

More information

Locator Pin Indexing Pin. Wire Size Marking CAUTION NOTE TOOLING ASSISTANCE CENTER PRODUCT INFORMATION

Locator Pin Indexing Pin. Wire Size Marking CAUTION NOTE TOOLING ASSISTANCE CENTER PRODUCT INFORMATION ROTA-CRIMP* Crmpng Tool Instructon Sheet 408-2681 68321-1 13 APR 12 Statonary De (Nest) Anvl De Hold-Down Devce and Contact Locator Front of Tool Locator Pn Indexng Pn Wre Sze Markng The hold-down devce

More information

PRO- CRIMPER* III Hand Crimping

PRO- CRIMPER* III Hand Crimping PRO- CRIMPER* III Hand Crmpng Instructon Sheet Tool Assembly 91338-1 408-8377 wth De Assembly 91338-2 22 JUL 09 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

PRO- CRIMPER* III Hand Crimping

PRO- CRIMPER* III Hand Crimping PRO- CRIMPER* III Hand Crmpng Instructon Sheet Tool 58448-2 408-9357 Wth De 58448-3 10 Mar 11 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered hand

More information

PRO- CRIMPER III Hand Crimping Tool Assembly DESCRIPTION (Figures 1 and 2)

PRO- CRIMPER III Hand Crimping Tool Assembly DESCRIPTION (Figures 1 and 2) PRO- CRIMPER* III Hand Crmpng Instructon Sheet Tool Assembly 58495-1 408-9819 Wth De Assembly 58495-2 22 JUL 09 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

onlinecomponents.com

onlinecomponents.com PRO- CRIMPER* III Hand Crmpng Instructon Sheet Tool Assembly 58535-1 wth 408-4021 De Assembly 58535-2 29 JUL 09 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

Customer witness testing guide

Customer witness testing guide Customer wtness testng gude Ths gude s amed at explanng why we need to wtness test equpment whch s beng connected to our network, what we actually do when we complete ths testng, and what you can do to

More information

SPeCtra X-XL. Section 4 Troubleshooting. read the safety information chapter before working on the machines.

SPeCtra X-XL. Section 4 Troubleshooting. read the safety information chapter before working on the machines. 4 SPeCtra X-XL en Secton 4 Troubleshootng Document Number: TD 103 421/A Order Number: 1H 328 259 read the safety nformaton chapter before workng on the machnes. Change log Date Changes Author No. ID 2011-10-19

More information

Instructions for Use. PetChatz.com. PetChatz.com

Instructions for Use. PetChatz.com. PetChatz.com Instructons for Use PetChatz.com PetChatz.com POWER ON/OFF LED PET-SAFE MICROPHONE SOUND DETECTOR MANUAL TREAT RELEASE LOW TREAT LED LOW-LIGHT HD CAMERA for hgh-qualty vdeo MOTION DETECTION FULL-COLOR

More information

PRO-CRIMPER* III Hand Crimping Tool Assembly with Die AssemblY

PRO-CRIMPER* III Hand Crimping Tool Assembly with Die AssemblY PRO-CRIMPER* III Hand Crmpng Tool Assembly 90758-1 wth De AssemblY 90758-2 Instructon Sheet 408-9938 01 NOV 11 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

PRO- CRIMPER* III Hand Crimping

PRO- CRIMPER* III Hand Crimping PRO- CRIMPER* III Hand Crmpng Instructon Sheet Tool Assembly 58641-1 wth 408-4379 De Assembly 58641-2 18 JUN 09 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

PRO- CRIMPER* III Hand

PRO- CRIMPER* III Hand PRO- CRIMPER* III Hand Instructon Sheet Crmpng Tool Assembly 58529-1 408-9999 wth De Assembly 58529-2 11 AUG 14 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

PRO- CRIMPER* III Hand

PRO- CRIMPER* III Hand PRO- CRIMPER* III Hand Instructon Sheet Crmpng Tool Assembly 90759-1 408-9962 wth De Assembly 90759-2 03 MAY 11 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

PRO- CRIMPER III Hand Crimping Tool Assembly INSTALLATION AND REMOVAL OF DIE SET AND LOCATOR ASSEMBLY (Figure 2)

PRO- CRIMPER III Hand Crimping Tool Assembly INSTALLATION AND REMOVAL OF DIE SET AND LOCATOR ASSEMBLY (Figure 2) PRO- CRIMPER* III Hand Crmpng Instructon Sheet Tool Assembly 90547-1 wth 408-9884 De Assembly 90547-2 02 NOV 09 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

Grafik auf der Vorgabeseite in den Grafikrahmen importieren!

Grafik auf der Vorgabeseite in den Grafikrahmen importieren! Grafk auf der Vorgabesete n den Grafkrahmen mporteren! COMAND Operator s Manual Mercedes-Benz Order-No. DamlerChrysler 6515 6665 13 Blaupunkt 8 622 403 493 Index D Parts-No. 230 584 36 82 US Edton B 10/02

More information

Parking barrier Parc 200 / Parc 200 speed

Parking barrier Parc 200 / Parc 200 speed GB Operatng nstructons Last updated: 01.2014 Parkng barrer Parc 200 / Parc 200 speed 1. Meanng of symbols 2. Table of contents Advce Cauton! Danger of personal njury! The followng safety advce must be

More information

Grafik auf der Vorgabeseite in den Grafikrahmen importieren!

Grafik auf der Vorgabeseite in den Grafikrahmen importieren! Grafk auf der Vorgabesete n den Grafkrahmen mporteren! COMAND Operator s Manual Mercedes-Benz Order-No. DamlerChrysler 6515 6668 13 Blaupunkt 8 622 403 703 Index E Parts-No. 230 584 38 82 US Edton E 07/03

More information

PRO- CRIMPER* III Hand

PRO- CRIMPER* III Hand PRO- CRIMPER* III Hand Instructon Sheet Crmpng Tool Assembly 90684-1 408-9934 wth De Assembly 90684-2 09 OCT 09 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

PRO-CRIMPER* III Hand Crimping Tool Assembly with Die Assembly

PRO-CRIMPER* III Hand Crimping Tool Assembly with Die Assembly PRO-CRIMPER* III Hand Crmpng Tool Assembly 90548-1 wth De Assembly 90548-2 Instructon Sheet 408-9885 02 NOV 12 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

Instruction Sheet AMPMODU* MTE CONNECTORS Mar 11 Rev A

Instruction Sheet AMPMODU* MTE CONNECTORS Mar 11 Rev A Instructon Sheet AMPMODU* MTE CONNECTORS 408-6919 10 Mar 11 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered hand tools. Hand tools are ntended for

More information

LITECOM. Self-contained emergency luminaires

LITECOM. Self-contained emergency luminaires LITECOM Self-contaned emergency lumnares Legal nformaton Copyrght Copyrght Zumtobel Lghtng GmbH All rghts reserved. Manufacturer Zumtobel Lghtng GmbH Schwezerstrasse 30 6850 Dornbrn AUSTRIA Tel. +43-(0)5572-390-0

More information

PRO-CRIMPER* III Hand Tool Assembly with Die Assembly

PRO-CRIMPER* III Hand Tool Assembly with Die Assembly PRO-CRIMPER* III Hand Tool Assembly 2063778-1 wth De Assembly 2063778-2 Instructon Sheet 408-10290 02 FEB 12 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

Pneumatic Power Bench Assembly

Pneumatic Power Bench Assembly Pneumatc Power Bench Assembly 58338-1 Instructon Sheet 408-9393 09 AUG 11 Fgure 1 1. INTRODUCTION Pneumatc Power Bench Assembly 58338-1 s a pneumatc power unt desgned to accept a varety of nterchangeable

More information

PRO-CRIMPER* III Hand. with Die Assembly OCT 11 Rev C. Pivot Pin. Die Assembly Moving Jaw CONTACT FAMILY SIZE (AWG)

PRO-CRIMPER* III Hand. with Die Assembly OCT 11 Rev C. Pivot Pin. Die Assembly Moving Jaw CONTACT FAMILY SIZE (AWG) PRO-CRIMPER* III Hand Instructon Sheet Crmpng Tool Assembly 58514-1 408-9973 wth De Assembly 58514-2 12 OCT 11 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

Table of Contents. Stabila LD420 1

Table of Contents. Stabila LD420 1 Table of Contents Instrument Set-up - - - - - - - - - - - - - - - - - - - - - - - Introducton- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Overvew - - - - - - - - - - - - - - - - - - -

More information

Gripping force, O.D. gripping. Gripping force, I.D. gripping

Gripping force, O.D. gripping. Gripping force, I.D. gripping Grppng force, O.D. grppng Fnger load Grppng force Grppng force, I.D. grppng Grppng force Fnger length M x max. 80 Nm M y max. 115 Nm M z max. 70 Nm F z max. 2000 N Fnger length The ndcated moments and

More information

User manual COUNTER SLIK-N118

User manual COUNTER SLIK-N118 Assstng the automaton ndustry snce 1986 User manual COUNTER SLIK-N118 Frmware: v.8.10 or hgher Input type: pulse, quadrature Batchng functon, wall mountng case IP 67 Read the user's manual carefully before

More information

User manual FLOW METER SPP-N118

User manual FLOW METER SPP-N118 Assstng the automaton ndustry snce 1986 User manual FLOW METER SPP-N118 Frmware: v.6.00 or hgher Input type: 0/4-20 ma Batchng and totalzer functon Read the user's manual carefully before startng to use

More information

LED Fixture Controller ELED1 Programming Guide

LED Fixture Controller ELED1 Programming Guide LED Fxture Controller ELED1 Programmng Gude ELED1-AUN ELED1-AUS Copyrght 2018 Echoflex Solutons, Inc. All rghts reserved. Product nformaton and specfcaton detals subject to change Echoflex Solutons 38924

More information

current activity shows on the top right corner in green. The steps appear in yellow

current activity shows on the top right corner in green. The steps appear in yellow Browzwear Tutorals Tutoral ntroducton Ths tutoral leads you through the basc garment creaton process usng an llustrated step by step approach. Each slde shows the actual applcaton at the stage of the acton

More information

SDE PEW- 12 Hand Tool

SDE PEW- 12 Hand Tool SDE PEW- 12 Hand Tool Instructon Sheet Assembly 2063956-1 wth 408-10370 De Assembly 2063956-2 07 OCT 10 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered

More information

RC Filters TEP Related Topics Principle Equipment

RC Filters TEP Related Topics Principle Equipment RC Flters TEP Related Topcs Hgh-pass, low-pass, Wen-Robnson brdge, parallel-t flters, dfferentatng network, ntegratng network, step response, square wave, transfer functon. Prncple Resstor-Capactor (RC)

More information

MTBF PREDICTION REPORT

MTBF PREDICTION REPORT MTBF PREDICTION REPORT PRODUCT NAME: BLE112-A-V2 Issued date: 01-23-2015 Rev:1.0 Copyrght@2015 Bluegga Technologes. All rghts reserved. 1 MTBF PREDICTION REPORT... 1 PRODUCT NAME: BLE112-A-V2... 1 1.0

More information

USER MANUAL for flow meter with current input SPP-94. firmware version: 1.04 or higher

USER MANUAL for flow meter with current input SPP-94. firmware version: 1.04 or higher SIMEX USER MANUAL for flow meter wth current nput famly: type: SPP-94 frmware verson: 1.04 or hgher Read the user's manual carefully before startng to use the unt. Producer reserves the rght to mplement

More information

Microlectra bv. User manual FLOW METER SPP-N118

Microlectra bv. User manual FLOW METER SPP-N118 Mcrolectra bv. Assstng the automaton ndustry snce 1986 User manual FLOW METER SPP-N118 Frmware: up to v. 5. 11 Input type: 0/4-20 ma Batchng and totalzer functon Read the user's manual carefully before

More information

Product Information. Universal gripper JGZ

Product Information. Universal gripper JGZ Product Informaton Unversal grpper JGZ JGZ Unversal grpper Loadable. Relable. Compact. JGZ unversal grpper Unversal 3-fnger centrc grpper of the compact class wth T-slot gudance and best cost-performance

More information

Instruction Sheet SDE- SA Hand Tool Assembly with Die Assembly

Instruction Sheet SDE- SA Hand Tool Assembly with Die Assembly Instructon Sheet 408-10002 wth De Assembly 1752938-2 06 APR 10 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered hand tools. Hand tools are ntended for

More information

User s manual. Digital Control Relay SAA SAB SAC SAD SAJ

User s manual. Digital Control Relay SAA SAB SAC SAD SAJ User s manual Dgtal Control Relay SAA SAB SAC SAD SAJ DISIBEINT ELECTRONIC S.L, has been present n the feld of the manufacture of components for the ndustral automaton for more than 35 years, and mantans

More information

STRATO-THERM* Terminal and Splice Hand Crimping Tools and 59461

STRATO-THERM* Terminal and Splice Hand Crimping Tools and 59461 STRATO-THERM* Termnal and Splce Hand Crmpng Tools 59294 and 59461 Instructon Sheet 408-1259 17 AUG 10 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered

More information

Instruction Sheet ROTA- CRIMP* Hand Crimping Tools and

Instruction Sheet ROTA- CRIMP* Hand Crimping Tools and Instructon Sheet ROTA- CRIMP* Hand Crmpng Tools 08-09 6007 and 6007- APR PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered hand tools. Hand tools are

More information

User manual METER. TVU Series

User manual METER. TVU Series Assstng the automaton ndustry snce 1986 User manual METER TVU Seres Frmware: v.1.00 or hgher Input type: unversal Wall mountng case IP 67 Read the user's manual carefully before startng to use the unt

More information

INSTRUCTION MANUAL BENCH LATHE

INSTRUCTION MANUAL BENCH LATHE WLLOUGHBY COMMUNTY MEN'S SHED mens 296C Salors Bay Road, l _ L^ NORTHBRDGE N.S.W 2063 The Wlkmghby Communty" NSTRUCTON MANUAL BENCH LATHE Before usng be sure to read ths manual carefully -C6- Safety nstructons

More information

Microlectra bv. User manual FLOW METER SPP-94

Microlectra bv. User manual FLOW METER SPP-94 Mcrolectra bv. Assstng the automaton ndustry snce 1986 User manual FLOW METER SPP-94 Input type: 0/4-20 ma Batchng and totalzer functon Read the user's manual carefully before startng to use the unt or

More information

User manual METER SRL-49

User manual METER SRL-49 Assstng the automaton ndustry snce 1986 User manual METER SRL-49 Frmware: v.5.21 or hgher Input type: 0/4-20 ma, 0/1-5V, 0/2-10V Multcolour bargraph Read the user's manual carefully before startng to use

More information

Product Information. Long-stroke gripper PEH

Product Information. Long-stroke gripper PEH Product Informaton PEH PEH Flexble. Hgh Performance Densty. Bus capable. PEH long-stroke grpper Servo-electrc 2-fnger parallel grpper wth long jaw stroke for large parts and dverse parts spectrum Feld

More information

Multichannel Frequency Comparator VCH-315. User Guide

Multichannel Frequency Comparator VCH-315. User Guide Multchannel Frequency Comparator VCH-315 User Gude Table of contents 1 Introducton... 3 2 The workng prncple of the Comparator... 6 3 The computed functons... 8 3.1 Basc ratos... 8 3.2 Statstcal functons...

More information

PRO-CRIMPER* III Hand Crimping Tool Assembly and Die Assemblies [ ]

PRO-CRIMPER* III Hand Crimping Tool Assembly and Die Assemblies [ ] PRO-CRIMPER* III Hand Crmpng Tool Assembly 58546-1 and De Assembles 58545-[ ] Instructon Sheet 408-8678 13 MAR 14 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

User s manual. Digital control relay SVO/SVP

User s manual. Digital control relay SVO/SVP User s manual Dgtal control relay SVO/SVP DISIBEINT ELECTRONIC S.L, has been present n the feld of the manufacture of components for the ndustral automaton for more than 35 years, and mantans n constant

More information

Product Information. Universal gripper PGN-plus

Product Information. Universal gripper PGN-plus Product Informaton Unversal grpper PGN-plus PGN-plus Unversal grpper Relable. Robust. Flexble. PGN-plus unversal grpper Unversal 2-Fnger Parallel Grpper wth large grppng force and hgh maxmum moments due

More information

Operating Instructions. MarSurf M RD 18

Operating Instructions. MarSurf M RD 18 Operatng Instructons MarSurf M 300 + RD 18 DE Deutsch EN Englsh FR Franças IT Italano ES Español PT Português Mahr GmbH, MarSurf M 300 + RD 18 Mahr GmbH, MarSurf M 300 + RD 18 Dear valued customer, Congratulatons

More information

User s manual. Digital control relay SNI

User s manual. Digital control relay SNI User s manual Dgtal control relay SNI DISIBEINT ELECTRONIC S.L, has been present n the feld of the manufacture of components for the ndustral automaton for more than 35 years, and mantans n constant evoluton

More information

Table of contents Document code: DPD00288B2 Edited:

Table of contents Document code: DPD00288B2 Edited: Table of contents Document code: DPD00288B2 Edted: 18.06.2010 1. Safety 3 1.1 Warnngs 3 1.2 Safety nstructons 5 1.3 Earthng and earth fault protecton 5 1.4 Before runnng the motor 6 2. Recept of delvery

More information

Hand Crimping Tool (For Insulated Heat Shrink Splices)

Hand Crimping Tool (For Insulated Heat Shrink Splices) Hand Crmpng Tool 607949-1 (For Insulated Heat Shrnk Splces) Instructon Sheet 408-4087 23 JAN 12 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered hand

More information

H 2 S CO CH 4. Detective Net User & Operator Manual. Detective Net

H 2 S CO CH 4. Detective Net User & Operator Manual. Detective Net H 2 S CO CH 4 Detectve Net User & Operator Manual Detectve Net M070019/ENG Issue 3 Aug 2015 NAVIGATION INSTRUCTIONS The symbols n the left-hand margn of each page of the manual wll enable you to carry

More information

Product Information. Gripper for small components EGP

Product Information. Gripper for small components EGP Product Informaton EGP EGP Hgh Performance Densty. Fast. Compact. EGP grpper for small components Electrc 2-fnger parallel grpper wth smooth-runnng base jaws guded on roller bearngs Feld of applcaton Grppng

More information

Product Information. Gripper for small components EGP

Product Information. Gripper for small components EGP Product Informaton EGP EGP Hgh Performance Densty. Fast. Compact. EGP grpper for small components Electrc 2-fnger parallel grpper wth smooth-runnng base jaws guded on roller bearngs Feld of applcaton Grppng

More information

coviva smartbox TKP100A

coviva smartbox TKP100A Operaton and confguraton nstructons covva smartbox TKP100A WLAN stck TKH180 Power supply (replacement requrement) TKC110 Page 1/30 05-2017 Inhalt Desgn and layout of the devce...3 Scope of delvery...3

More information

POLYTECHNIC UNIVERSITY Electrical Engineering Department. EE SOPHOMORE LABORATORY Experiment 1 Laboratory Energy Sources

POLYTECHNIC UNIVERSITY Electrical Engineering Department. EE SOPHOMORE LABORATORY Experiment 1 Laboratory Energy Sources POLYTECHNIC UNIERSITY Electrcal Engneerng Department EE SOPHOMORE LABORATORY Experment 1 Laboratory Energy Sources Modfed for Physcs 18, Brooklyn College I. Oerew of the Experment Ths experment has three

More information

Product Information. Long-stroke gripper EGA

Product Information. Long-stroke gripper EGA Product Informaton EGA EGA Flexble. Modular. Robust. EGA long-stroke grpper Electrc 2-fnger parallel grpper wth lghtweght profle ral gude and adaptable servo- motor Feld of applcaton Optmal standard soluton

More information

Dynamic Optimization. Assignment 1. Sasanka Nagavalli January 29, 2013 Robotics Institute Carnegie Mellon University

Dynamic Optimization. Assignment 1. Sasanka Nagavalli January 29, 2013 Robotics Institute Carnegie Mellon University Dynamc Optmzaton Assgnment 1 Sasanka Nagavall snagaval@andrew.cmu.edu 16-745 January 29, 213 Robotcs Insttute Carnege Mellon Unversty Table of Contents 1. Problem and Approach... 1 2. Optmzaton wthout

More information

EPLC9600-PID QUADRO(96x96 1/4 DIN) 4 Channel PID Controller

EPLC9600-PID QUADRO(96x96 1/4 DIN) 4 Channel PID Controller EPLC9600-PID QUADRO(96x96 1/4 DIN) 4 Channel PID Controller EPLC9600-PID QUADRO 96 x 96 DIN 1/4 4 Channel PID Controller - 128 x 64 Graphcal LCD dsplay - 4 Thermocouple (J, K, L, R or S type) sensor nputs

More information

How to Get Started with Virtual Goalie

How to Get Started with Virtual Goalie How to Get Started wth Vrtual Goale HTC VIVE Set up your computer and moble devce Acqure a vrtual realty-enabled computer and the HTC Vve. For hardware specs, to test your computer, or to order from Amazon,

More information

100 mm. 200 mm. 300 mm. 500 mm. Wood (rough) Cardboard Black DBT DBT DBT DBT DBT - 1 K DBT K CONNECTION DIAGRAMS.

100 mm. 200 mm. 300 mm. 500 mm. Wood (rough) Cardboard Black DBT DBT DBT DBT DBT - 1 K DBT K CONNECTION DIAGRAMS. DIFFUSED BEAM SENSOR Ths devce consst of a transmtter and a recever together. Ths look alke Inductve Proxmty Sensor and hence also known as IR Proxmty Sensor. The emtter emts Infra red rays whch are reflected

More information

Insertion/Extraction Tool and Replacement Tip Kits [ ]

Insertion/Extraction Tool and Replacement Tip Kits [ ] Inserton/Extracton Tool 91285-1 and Replacement Tp Kts 543382-[ ] Instructon Sheet 408-9404 19 JUN 12 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered

More information

SDE Electric Bench Terminator READ THIS FIRST! customer manual TOOLING ASSISTANCE CENTER

SDE Electric Bench Terminator READ THIS FIRST! customer manual TOOLING ASSISTANCE CENTER SDE Electrc Bench Termnator 1490076-2 Customer Manual 409-10052 31 JAN 12 customer manual SAFETY A. PRECAUTIONS READ THIS FIRST!............................ 2 1. INTRODUCTION........................................................

More information

vacon 20 complete user manual ac drives Phone: Fax: Web: -

vacon 20 complete user manual ac drives Phone: Fax: Web:  - vacon 20 ac drves complete user manual Table of contents Document: DPD00716E1 Release date: 08.03.2013 Software package: FW0107V008.vcx 1.Safety 1 1.1Warnngs 1 1.2Safety nstructons 3 1.3Earthng and earth

More information

Table of contents Doc: DPD00716A1, Date:

Table of contents Doc: DPD00716A1, Date: VACON 20 Table of contents Doc: DPD00716A1, Date: 22.11.11 1.Safety 1 1.1.Warnngs 1 1.2.Safety nstructons 3 1.3.Earthng and earth fault protecton 3 1.4.Before runnng the motor 5 2.Recept of delvery 6 2.1.Type

More information

Figure 1. DC-DC Boost Converter

Figure 1. DC-DC Boost Converter EE46, Power Electroncs, DC-DC Boost Converter Verson Oct. 3, 11 Overvew Boost converters make t possble to effcently convert a DC voltage from a lower level to a hgher level. Theory of Operaton Relaton

More information

AFV-P 2U/4U. AC + DC Power Solutions. series. Transient Generation for Disturbance Tests. only. High Performance Programmable AC Power Source

AFV-P 2U/4U. AC + DC Power Solutions. series. Transient Generation for Disturbance Tests. only. High Performance Programmable AC Power Source AFV-P seres Hgh Performance Programmable AC Power Source only 2U/4U Intutve Touch Screen HMI Output Frequency up to 15-1000Hz Power Lne Smulatons: Step & Ramp Features Fast Response Tme: 300μs AC Source

More information

Product Information. Jaw quick-change system BSWS-PGZN-plus

Product Information. Jaw quick-change system BSWS-PGZN-plus Product Informaton BSWS-PGZN-plus BSWS-PGZN-plus Productve. Flexble. Cost-effectve. BSWS jaw quck-change system The BSWS jaw quck-change system allows top jaws to be changed on the grpper manually and

More information

Shur-Plug*.156 Diameter Terminals and Receptacle Contacts

Shur-Plug*.156 Diameter Terminals and Receptacle Contacts Shur-Plug*.156 Dameter Termnals and Receptacle Contacts Applcaton Specfcaton 114-2042 07 NOV 12 All numercal values are n metrc unts [wth U.S. customary unts n brackets]. Dmensons are n mllmeters [and

More information

vacon 20 ac drives complete user manual

vacon 20 ac drives complete user manual vacon 20 ac drves complete user manual Document: DPD00716H1 Release date: July, 2016 Software package: FW0107V012.vcx 1.Safety 1 1.1Warnngs 1 1.2Safety nstructons 3 1.3Earthng and earth fault protecton

More information

熊本大学学術リポジトリ. Kumamoto University Repositor

熊本大学学術リポジトリ. Kumamoto University Repositor 熊本大学学術リポジトリ Kumamoto Unversty Repostor Ttle Wreless LAN Based Indoor Poston and Its Smulaton Author(s) Ktasuka, Teruak; Nakansh, Tsune CtatonIEEE Pacfc RIM Conference on Comm Computers, and Sgnal Processng

More information

Figure 1. DC-DC Boost Converter

Figure 1. DC-DC Boost Converter EE36L, Power Electroncs, DC-DC Boost Converter Verson Feb. 8, 9 Overvew Boost converters make t possble to effcently convert a DC voltage from a lower level to a hgher level. Theory of Operaton Relaton

More information

Product Information. Gripper for small components EGP 50

Product Information. Gripper for small components EGP 50 Product Informaton EGP 50 EGP Hgh Performance Densty. Fast. Compact. EGP grpper for small components Electrc 2-fnger parallel grpper wth smooth-runnng base jaws guded on roller bearngs Feld of applcaton

More information

CONTROL PANEL FOR 24 V GEARMOTORS 319V21EN INSTALLATION MANUAL ZL92. English

CONTROL PANEL FOR 24 V GEARMOTORS 319V21EN INSTALLATION MANUAL ZL92. English 319V21EN CONTROL PANEL FOR 24 V GEARMOTORS INSTALLATION MANUAL ZL92 Englsh EN Foreword Use of the products must be restrcted to ts ntended use (.e. that for whch t was expressly bult for). Any other use

More information

Operator's Manual A1000. Applicator. Made in Germany

Operator's Manual A1000. Applicator. Made in Germany Operator's Manual Applcator A1000 Made n Germany 2 Operator's Manual - Translaton of the Orgnal Verson 2 for the followng products Famly A1000 Edton: 03/2016 - Part No. 9009599 Copyrght Ths documentaton

More information

Gigaset A540 / en / A31008-M2601-R201-1-SM19 / Cover_front.fm / Gigaset A Ð U

Gigaset A540 / en / A31008-M2601-R201-1-SM19 / Cover_front.fm / Gigaset A Ð U A540 Congratulatons By purchasng a Ggaset, you have chosen a brand that s fully commtted to sustanablty. Ths product s packagng s eco-frendly! To learn more, vst www.ggaset.com. Ggaset A540 13 1 Ð U 2

More information

Service Manual 5414/5416. Vacuum-Belt Applicator. Made in Germany

Service Manual 5414/5416. Vacuum-Belt Applicator. Made in Germany Servce Manual Vacuum-Belt Applcator 5414/5416 Made n Germany 2 Servce Manual 2 for the followng products Famly Vacuum-Belt Applcator Type 5414L 5414R 5416L 5416R Edton: 04/2018 - Part No. 9003095 Copyrght

More information

MULTIPOLE CONNECTORS SQUICH CN NEW SQUICH. Connections without tools reduced space SQUICH A TIMESAVER

MULTIPOLE CONNECTORS SQUICH CN NEW SQUICH. Connections without tools reduced space SQUICH A TIMESAVER SCREW CONNECTION ULTIPOLE CONNECTORS SQUICH CN SQUICH SQUICH Connectons wthout tools reduced space A TIESAVER SQUICH ULTIPOLE CONNECTORS SQUICH CN SQUICH seres Connectons wthout tools To mprove hgh performance

More information

Unit 1. Current and Voltage U 1 VOLTAGE AND CURRENT. Circuit Basics KVL, KCL, Ohm's Law LED Outputs Buttons/Switch Inputs. Current / Voltage Analogy

Unit 1. Current and Voltage U 1 VOLTAGE AND CURRENT. Circuit Basics KVL, KCL, Ohm's Law LED Outputs Buttons/Switch Inputs. Current / Voltage Analogy ..2 nt Crcut Bascs KVL, KCL, Ohm's Law LED Outputs Buttons/Swtch Inputs VOLTAGE AND CRRENT..4 Current and Voltage Current / Voltage Analogy Charge s measured n unts of Coulombs Current Amount of charge

More information

Operator's Manual. PCB Separator MAESTRO 4S

Operator's Manual. PCB Separator MAESTRO 4S Operator's Manual PCB Separator MAESTRO 4S 2 Operator's Manual - Translaton of the Orgnal Verson for the followng products Descrpton PCB Separator Type MAESTRO 4S Edton: 10/2017 Part No.: 9009613 Copyrght

More information

Sensors for Motion and Position Measurement

Sensors for Motion and Position Measurement Sensors for Moton and Poston Measurement Introducton An ntegrated manufacturng envronment conssts of 5 elements:- - Machne tools - Inspecton devces - Materal handlng devces - Packagng machnes - Area where

More information

N- and P-Channel 2.5-V (G-S) MOSFET

N- and P-Channel 2.5-V (G-S) MOSFET S456DY N- and P-Channel.5-V (G-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) (A).5 at 7. N-Channel.35 at V GS =.5 V 6. FEATURES Halogen-free Accordng to IEC 649-- Defnton TrenchFET Power MOSFET:.5 Rated

More information

Bourdon tube safety pressure gauges EN 837-1

Bourdon tube safety pressure gauges EN 837-1 safety pressure gauges EN 837-1 Safety pressure gauge S3 as per EN 837-1/9.7.2 Measurng system fully welded to housng Tghtness-tested wth helum DNV- and GOSSTANDART-certfed A Page 476 Applcaton For corrosve

More information

... -J to send radio signals through the air, how modulation , IJ."~ UNITED STATES~~ FREQUENCY ALLOCATIONS

... -J to send radio signals through the air, how modulation , IJ.~ UNITED STATES~~ FREQUENCY ALLOCATIONS ..., J."..J What would lfe be lke wthout rado and televson? Only a hundred years ago the fastest way to send a message between Amerca and Europe or Asa was a fast shp. Now we get lve televson coverage

More information

Make Your Own Biodiesel Processor by drinkmorecoffee

Make Your Own Biodiesel Processor by drinkmorecoffee http://www.nstructables.com/d/make-your-own-bodesel-processor//... Instructables.com Make Your Own Bodesel Processor by drnkmorecoffee Aprl 21, 2008 In a world where envronmental awareness s becomng ncreasngly

More information

Digital Transmission

Digital Transmission Dgtal Transmsson Most modern communcaton systems are dgtal, meanng that the transmtted normaton sgnal carres bts and symbols rather than an analog sgnal. The eect o C/N rato ncrease or decrease on dgtal

More information

Uncertainty in measurements of power and energy on power networks

Uncertainty in measurements of power and energy on power networks Uncertanty n measurements of power and energy on power networks E. Manov, N. Kolev Department of Measurement and Instrumentaton, Techncal Unversty Sofa, bul. Klment Ohrdsk No8, bl., 000 Sofa, Bulgara Tel./fax:

More information

Tunable Wideband Receiver (TWB) Data Processing Description December, 2013

Tunable Wideband Receiver (TWB) Data Processing Description December, 2013 Page 1 of 5 Tunable Wdeband Recever (TWB) Data Processng Descrpton December, 2013 The tunable wdeband recever (TWB) can be manually tuned to any frequency of nterest between 17 and 33 MHz. The recever

More information

Preparation INSTALLATION INFORMATION

Preparation INSTALLATION INFORMATION Preparaton 1 Pergo domestc Elegance s delvered wth nstructons n the form of llustratons. The texts below provde explanatons for the llustratons, and are dvded n three areas: Preparaton, Installaton and

More information

MCP 2.8 mm Contact System and Wire Seal for 1P Starter Motor Connectors

MCP 2.8 mm Contact System and Wire Seal for 1P Starter Motor Connectors MCP 2.8 mm Contact System and Wre Seal for 1P Starter Motor Connectors Applcaton Specfcaton 114-13295 05 MAY 11 All numercal values are n metrc unts [wth U.S. customary unts n brackets]. Dmensons are n

More information

SMD Common Mode Filter for Signal Line. PRODUCT IDENTIFICATION 2012 F P - E under development. (1) (2) (3) (4) (5) (6) APPLICATIONS

SMD Common Mode Filter for Signal Line. PRODUCT IDENTIFICATION 2012 F P - E under development. (1) (2) (3) (4) (5) (6) APPLICATIONS Motocraft SMD Common Mode Flter for Sgnal Lne CMF2012F Seres (Sheldng Type) FEATURES Ths common mode flter s characterzed by ts small szed Hghly effectve n nose suppresson,hght common mode mpedance at

More information