100 mm. 200 mm. 300 mm. 500 mm. Wood (rough) Cardboard Black DBT DBT DBT DBT DBT - 1 K DBT K CONNECTION DIAGRAMS.

Transcription

1

2 DIFFUSED BEAM SENSOR Ths devce consst of a transmtter and a recever together. Ths look alke Inductve Proxmty Sensor and hence also known as IR Proxmty Sensor. The emtter emts Infra red rays whch are reflected on the recever through the object to be regstered. In the use of these sensors, t s mportant to bear n mnd the colour of the object. Lght colour corresponds to the maxmum dstance and vce versa. In case of shny object; the effect of surface of object s more mportant than the colour. Type Ø (mm) L (mm) Sn DBT mm DBT mm DBT mm DBT mm DBT - 1 K DBT K ADVANTAGES : Transmtter and recever are housed n the same housng. As the self reflecton of an object s used for detecton; Dark & Lght marks can be dstngushed. Response Tme Swtchng Frequency Operatng Voltage Maxmum Load Current Maxmum Current 24V DC (No Load) Voltage Drop Short Crcut Protecton LED Indcator Temperature Lmt Cable : 5 msec : 100 Hz : 10- VDC : 100 ma : 24 ma (OFF) 34 ma (ON) : 1 V Max : 0-55 C : 2 Mtrs (std.) 1 mtr 1.5 mtrs CORRECTION FACTOR FOR SENSING DISTANCE MATERIAL CORRECTION FACTOR Standard Paper Whte 1 Metal Polshed FIELD OF APPLICATION : Polysterene, Whte These Sensors are partcularly used for poston sensng and PVC, Grey countng of non metallc objects. It s also used for Bottle sensng, Level sensng, Heght sensng, Plastc flm sensng, Edge detecton Wood (rough) of paper or sheet metal etc. Cotton Cloth Whte TECHNICAL CHARACTERISTICS : Cardboard Black A Type DBT DBT DBT - 0 DBT DBT - 1 K DBT K ORDERING CODE B Load Technque P - PNP N - NPN C Load Logc O - NO C - NC Effectve Sensng Range = Sn X Correcton Factor EXAMPLE : DBT P -O Dffused Beam Sensor, Sensng range 100 mm, PNP, Normally open CONNECTION DIAGRAMS P/S NPN Green Vcc Load Red O/P Black P/S PNP Vcc Green Load Red O/P Black Sensor can be used to drve 12 VDC/ 24 VDC Relay, can be coupled to PLC, Dgtal Counter, RPM ndcator etc. CONTROLS PVT. LTD. 202, Krshna, Laxm Industral Complex, e-mal: nfo@proxmon.com Webste:

3

4 THROUGH BEAM SENSORS WITH BUILT IN AMPLIFIER CYLINDRICAL CONSTRUCTION : SLOT CONSTRUCTION : Type Ø (mm) L (mm) Sn Type H (mm) W (mm) D (mm) Sn SBTA - 1K SBTA - 3K 1 Mtr. 3 Mtrs. GP - 20 GP mm 50 mm SBTA - 5K 5 Mtrs. GP mm SBTA - 10K 10 Mtrs. GP mm 25 4 SBTA - K Mtrs L Transmtter Recever Ths consst of two devces, a lght emtter and a lght recever. The lght recever devce contans amplfer crcut whch gves transstorsed output. These two devces are kept apart facng each other. The transmtter sends pulses of lght n the nfrared range whch are nvsble to the human eye. The recever devce opposte to the transmtter receves these rays. On nterrupton of these rays by the target object, recever gves a sgnal whch s amplfed and fed to output transstor. ADVANTAGES : Large sensng dstance s possble as emtter and recever are Kept opposte to each other. Sutable for precse detecton of large as well as small objects. Repeatablty and Indexng precson are not mpared even f the Object surface or background s reflectng. Can be coupled drectly to PLC. FIELD OF APPLICATION : These sensors are used for Label sensng, Bottle sensng, Door openng/closng, Flm sensng, Countng objects on movng conveyor, slver breakage detecton etc. A Type ORDERING CODE B Load Technque C Load Logc TECHNICAL CHARACTERISTICS : Response Tme : 5 msec Swtchng Frequency : 100 Hz Operatng Voltage : 10 - VDC Maxmum Load Current : 100 ma Maxmum Current consumpton : 29 ma n (OFF) 24V DC (No Load) 34 ma n (ON) state Voltage Drop : 1 V Max Short Crcut Protecton LED Indcator Temperature Lmt : 0-55 C Cable : 2 Mtrs (std.) SBTA - 1 K SBTA - 3K SBTA - 5K SBTA - 10K SBTA - K GP - 20 GP - 50 GP GP Example : 1) SBTA - 5K - N - 0 Through Beam Sensor wth Bult n Amplfer, Sensng range 5 mtrs, NPN, Normally open P - PNP N - NPN O - NO C - NC 2) GP P - O Slot sensor, slot gap 50 mm, PNP, Normally open CONTROLS PVT. LTD. 202, Krshna, Laxm Industral Complex, e-mal: nfo@proxmon.com Webste:

5 RETRO - REFLECTIVE SENSORS Type O (mm) L (mm) Sn RBI - 0 0mm RBI - 1K 1 Mtr. RBI - 2K 2 Mtrs. RBI - 3K 3 Mtrs. RBI - 4K 4 Mtrs. RBI - 10K 10 Mtrs. TECHNICAL CHARACTERISTICS : Ths s a system whch consst of one devce and a reflector. The devce contans emtter and recever. The rays emtted by the emtter are reflected by the reflector to the recever. The sensng of the object occurs when these rays are nterrupted. ADVANTAGES : Easy assembly compared to the through beam type. Large actve sensng range compared to dffused beam type. FIELD OF APPLICATION : Ths sensor can be used where t s dffcult to nstall Through Beam Sensor due to space constrant. Further, smple wrng makes t sutable where sensng objects are bgger n sze. Thus these sensors are used for loop control n decoler, edge detecton n paper/sheet metal etc. Response Tme Swtchng Frequency Operatng Voltage Maxmum Load Current Maxmum Current 24V DC (No Load) Voltage Drop Short Crcut Protecton LED Indcator Temperature Lmt Cable : 5 msec : 100 Hz : 10- VDC : 100 ma : 25 ma n OFF state 35 ma n ON state : 1 V Max : 0-55 C : 2 Mtrs (std.) Note : As every object has some reflectvty, n Retro-Reflectve Sensor object wll not be sensed f t s passed nearer to sensor. In ths porton sensor remans nactve as object tself works as reflector. Ths porton s known as Dead Zone. Hence, t s recommended to move the object nearer to reflector [.e. away from the sensor ] as much as possble. Generally, the effectve sensng zone for an object s to 100%, away from sensor. Also, you can reduce the dead zone by gan adjustment faclty provded on sensor, but t wll also reduce the nomnal sensng dstance [Sn]. A Type RBI - 0 RBI - 1K RBI - 2K RBI - 3K RBI - 4K RBI - 10K Example : ORDERING CODE B Load Technque P - PNP N - NPN C Load Logc O - NO C - NC RBI - 3 K - P - 0 Retro - Reflectve Sensor, Sensng range 3 Mtrs., PNP, Normally open CONTROLS PVT. LTD. 202, Krshna, Laxm Industral Complex, e-mal: nfo@proxmon.com Webste:

6 PRINT MARK SENSOR Ths s desgned for sensng Regstraton Mark. It contnuously scans the presence of regstraton mark on the movng packagng flm. The electronc crcutry s capable of detectng / scannng any colours on any background colour. A modulated Green LED s focused on the movng packagng flm. A hghly senstve Photo cell contnuously accepts the reflectons from the flm (paper / plastc) and sends the sgnals to the electronc scannng crcut. On scannng the presence of Regstraton Mark; t gves transstorsed output. A logc controller s also provded whch accepts sgnals from scannng head & other Proxmty Sensors to keep correct pouch / bag length by drvng correcton motor (110 VAC, 4 wre) or (2 VAC, 3 wre). SALIENT FEATURES : Fully sold state thus makng t totally relable. Immune to external lght source, electrcal nterference. A selector swtch provded to choose Dark swtchng or lght swtchng. Hgh speed swtchng.e marks/ mn. Detecton of dfferent contrast sheds by means of senstvty pot provson. PRINT MARK SENSOR WITH TEACH - IN FUNCTION : Ths s wth mcro Controller based technology, wheren user has to press SCAN key (a feather touch key), keepng Whte spot lght on Mark colour as well as on background colour and wthn 2-3 sec both colours wll get regstered n memory. The electronc scannng crcut then dfferentate both colours and gves out put on detecton of Regstraton Mark. SPECIFICATIONS : Supply Voltage Scannng Dstance Dmensons : 10 - VDC : 3 to 8 mm Between the Scannng head & the flm : x 65 x 35 mm (H X W X D) CONTROLS PVT. LTD. 202, Krshna, Laxm Industral Complex, e-mal: nfo@proxmon.com Webste: