AFV-P 2U/4U. AC + DC Power Solutions. series. Transient Generation for Disturbance Tests. only. High Performance Programmable AC Power Source

Transcription

1 AFV-P seres Hgh Performance Programmable AC Power Source only 2U/4U Intutve Touch Screen HMI Output Frequency up to Hz Power Lne Smulatons: Step & Ramp Features Fast Response Tme: 300μs AC Source wth DC output AC & DC 600VA to 5kVA only n 2U or 4U Low Dstorton: THD % Transent Generaton for Dsturbance Tests Complete Remote Interface: USB/RS232/RS485/Ethernet/GPIB User-frendly Control Software AC + DC Power Solutons

2 AFV-P seres Hgh Performance Programmable AC Power Source Standard USB RS232 RS485 Ethernet GPIB Optonal Analog Control Preen's AFV-P seres s a programmable AC power source wth stable DC output and precse measurement capablty. Ths compact product comes n four power levels: 600VA, 1250VA, 2500VA and 5000VA, whch provdes clean power wth dstorton less than 0.3% at 50/60Hz. It delvers contnuously adjustable output voltage 0-310VAC and output frequency Hz (opt Hz). Accordngly, AFV-P seres s deal for ndustres of commercal, defense and aerospace from desgn verfcaton, qualty assurance, ATE to mass producton. AFV-P seres provdes comprehensve programmable features (Step, Ramp and Transent features) and a total of 1200 Steps n 50 bult-n Memory Sets, so that users now can easly confgure varous voltage and frequency combnatons for smulatng global AC power condtons, such as surge, sag, spkes and dropouts. Wth the advanced PWM technology, the AFV-P seres s capable of delverng up to 4.5 tmes of peak current from ts rated current, whch s sutable for motor-type test wth nrush current ssue. Addtonally, user can set the start/end angle of the product output from 0 to 359. AFV-P seres ncludes measurement capablty of RMS voltage, output frequency, RMS current, true power, apparent power, reactve power, power factor and crest factor. Its 5" touch screen wth rotary knob eases local operaton to quckly set the product output. Its complete remote nterfaces and specalzed control software offer an easy programmng manner to remotely control the product. Maxmze your devces relablty wth Preen s AFV-P seres programmable AC source. Programmable Smulatons: Transent Feature Trans. Tme Trans. Voltage Wth the Transent feature, user can have more control over the output waveform by addng dsturbance at user-defned locatons wth user-defned drop/rse range. Ths feature s useful to smulate dfferent pre-complance test and varous types of power lne dsturbance, such as surge, sag, spke and dropout, for mmunty tests. Complete Remote Interfaces & Control Software Compact & Hgh Power Densty 2U/4U 2U: 600VA / 1250VA / 2500VA Avalable for AC & DC testng applcatons 4U: 5000VA Ideal for Inrush Current Applcatons Capable of delverng up to 4.5 tmes of peak current from RMS current Low Dstorton (THD) 0.3% Less than 0.3% when output frequency s at 50/60Hz PANEL DESCRIPTION AC Source wth DC Output DC Wde Output Voltage & Frequency 0-310V Hz Pre-complance Tests IEC An deal pre-complance soluton for IEC Intutve Touch Screen Control AFV-P seres s equpped wth standard nterfaces of USB, RS232, RS485 and Ethernet, so users no longer need to spend extra on nterface card. Only GPIB and Analog Control are optonal nterfaces. AFV-P seres also provdes specalzed control software wth complete programmng features and LabVew drver, whch allows easy control wthout further programmng. To create a complex sequence on the local control HMI s no longer a dffcult task for AFV-P seres. Its 5" touch screen provdes users a clear measurement dsplay and an easy set up for product output. AFV-P seres s also equpped wth a rotary knob for better fne tune adjustments. Addtonally, touch screen lock s avalable to avod maloperaton. 1. Power Swtch 2. Touch Screen HMI 10. Ethernet Interface 11. Input Voltage Selector Front Panel Overvew Wde Applcatons 3. Rotary Knob 4. Output / Reset 5. AC Output Socket 6. Output Termnals 7. Remote Sense 12. PLC Remote In/Out 13. USB Interface (for frmware update) 14. Sync. Sngal I/O 15. Input Socket * Rear Panel Overvew * AFV-P seres s deal for power adapters test by varyng output voltage and frequency to smulate dfferent real-word grd condtons. Output frequency of AFV-P seres can go up to 1000Hz, whch s sutable for avonc test wth 400Hz or 800Hz. Wth the comprehensve programmable features, such as Step, Ramp and Transent features, users are allowed to buld a wde range of output waveforms n a sequence, so as to smulated grd faults and fluctuatons. 8. USB Interface 9. RS232 / RS485 *For AFV-P-1250, AFV-P-2500 and AFV-P-5000, the nput socket s replaced by the nput termnals.

3 Key Features of AFV-P Seres AC Output & DC Output Ideal for Hgh Inrush Current EUT & Start / End Angle Settng AC Output DC Output AFV-P seres can selectvely generate AC output or DC output accordng to user-defned settngs. Ths feature not only extends applcatons to AC & DC component test, but allows effectvely cost reducton of purchasng another DC source. Therefore, t s an deal power testng soluton for R&D unt and certfcaton laboratores wth lmted space. Power Supply Testng 90 Start Angle Inrush Current for 90 Start Angle Programmable Smulatons: Step & Ramp Features Step Feature Wth the Step feature, users can create complex sequences by lnkng up to 1200 self-defned Steps n 50 Memory Sets. Voltage, frequency and dwell tme for each Step can be defned ndependently, and users can set start/end number of Step Loop to cyclcally perform the Step feature, so as to smulate grd voltage fluctuatons or ON/OFF test. Because of ts fast response tme, AFV-P seres can perform Step change n less than a cycle and provde a relable AC power smulatons. Volt. 1 Volt. 2 Volt. 1 Voltage Step Frequency Step Freq. 1 Freq. 2 Freq. 3 Motor Type Testng Capable to sustan hgh start nrusch current generated by motor or compressor. AFV-P seres can delver up to 4.5 tmes of peak current from ts RMS current, and t can control the product output accordng to user-defned start/end angle, so t s sutable for testng swtchng power supples wth hgh nrush current ssue. Addtonally, t s able to provde a customzed 150% overload capablty for startng up motor-type DUT, such as electrc motor. Waveform Dsplay & Comprehensve Measurement Capablty Ramp Feature Tme1 Tme2 Tme3 Step1 Step2 Step3 Tme1 Tme2 Tme3 Step1 Step2 Step3 Wth the Ramp feature, users can set Ramp tme unt, Ramp tme, voltage and frequency per unt, so as to defne slew rate of voltage and frequency for each Step, then the product output wll change accordng to user-defned slew rate. Addtonally, ths feature can effectvely reduce the nrush current, and save the cost on selectng an AC source wth much hgher output power for nductve-type loads. Wth the advanced measurement crcutry and frmware desgn, AFV-P seres s capable of provdng output waveform dsplay and precse measurement readngs, so that user can easly check the readngs of RMS voltage, output frequency, RMS current, true power, apparent power, reactve power, power factor and crest factor accordng to the product output. Addtonally, all measurement readngs can be exported as a report va the control software for analyzng and trackng EUT performance. Voltage Ramp Up Frequency Ramp Up Synchronzed Sgnal Fast Response & Hgh Stablty Measurement <300 µs Over Current Foldback Remote Sense Feature When t comes to over current, AFV-P seres offers more than just shutdown protecton. Over current foldback enables AFV-P seres to mantan the output current at the rated current and correspondngly decrease the output voltage as the load mpedance ncreases. It s an extended protecton or an alternatve to provde constant current for EUT. Wth the remote sense feature, voltage drop compensaton s avalable when s comes to output voltage decrease due to the cable length. In other words, AFV-P seres can automatcally correct the reduced voltage and delver accurate voltage to ensure stable voltage condtons. 5V DC Synchronzed Sgnal AFV-P seres provdes two types of synchronzed sgnal. It can ether delver a 5V DC sgnal contnuously when the product output s on or delver a 5V DC pulse sgnal every tme there s a change on the product output. Ths feature makes AFV-P seres an deal AC source when applyng wth automatc test systems. To smulate power lne dsturbance, such as sags, surges, dropouts and spkes, response tme has always been a crtcal factor. AFV-P seres s a hgh performance AC source wth fast response tme less than 300 µs, and users are allowed to do pre-complance tests accordngly, such as IEC

4 SPECIFICATIONS Orderng Informaton Model INPUT Phase Voltage Frequency Max. Current OUTPUT Power Phase Voltage Ranges Voltage Resoluton Frequency Frequency Resoluton Total Harmonc Dstorton (THD) Lne Regulaton Load Regulaton Response Tme Crest Factor DC OUTPUT Power Voltage Ranges MEASUREMENT Voltage Range Voltage Accuracy Voltage Resoluton Frequency Range Frequency Accuracy Frequency Resoluton Current Range Current Accuracy Current Resoluton Peak Current Range Peak Current Accuracy Peak Current Resoluton µ AFV-P-600 AFV-P-1250 AFV-P-2500 AFV-P VAC / VAC Sngle Hz (opt. 400Hz) 1Ø / 2 Wre + G VAC or VAC 10A 20A 20A 40A 600VA 1250VA 2500VA 5000VA 500W 1000W 2000W 4000W 0-155Vrms / 0-310Vrms, user selectable 0.1Vrms Hz (opt Hz) 0.1Hz, 1Hz at >100Hz Max. Current (RMS) 5A / 2.5A 10A / 5A 20A / 10A 40A / 20A Max. Current (Peak) 15A / 7.5A 30A / 15A 60A / 30A 120A / 60A 0.3% at Hz, 0.5% at Hz, 0.8% at Hz (Resstve Load) ± 0.1V 0.07% F.S. (Resstve Load) 300μs 3 300W 600W 1250W 2500W 0-210V / 0 420V Max. Current 2.5A / 1.25A 5A / 2.5A 10A / 5A 20A / 10A Rpple & Nose (RMS) 0.15% 0.24% Power Accuracy Power Resoluton VA W H: 1-12A / Lo: A 0-420Vrms ±(0.2% of readng + 5 counts) 0.1V Hz ±0.1Hz at Hz, ±0.2Hz at Hz 0.1Hz H: 2-24A / Lo: A H: 0.05A A ±(1% of readng + 5 counts) at Hz, ±(1% of readng + 10 counts) at Hz *2 0-45A H: 0.01A / Lo: 0.001A H: 0.01A ±(1% of readng + 5 counts) at Hz, ±(1% of readng + 10 counts) at Hz Power Range H: W / Lo: 0-120W H: W / Lo: 0-240W H: W GENERAL Effcency Protecton Remote Interface Over Current Foldback Output Sync Sgnal Memores Operatng Temperature Weght 77% at max. power ±(2% of readng Hz, ±(2% of readng Hz H: 1W / Lo: 0.1W 0.1A 0-90A 0-180A 80% at max. power OVP, OCP, LVP, OPP, OTP, RCP, Fan Fal ±(1% F.S.+ 5 counts) H: 1W Standard: RS232 / RS485 / Ethernet / USB / PLC Remote In&Out, Optonal: GPIB / Analog Control Output Current mantans constant based on the load whle output voltage vares ON, Event for Voltage or Frequency Change (Output sgnal 5V, BNC type) 50 Memores & 1200 Steps (24 Steps/Memory) 0-40 approx. 16 kg approx. 20 kg approx kg approx.61.5 kg Model Number Descrpton AFV-P-600A Programmable AC Source 600VA/0-310VAC/ Hz AFV-P-600B Programmable AC Source 600VA/0-310VAC/40-500Hz AFV-P-1250A Programmable AC Source 1250VA/0-310VAC/ Hz AFV-P-1250B Programmable AC Source 1250VA/0-310VAC/40-500Hz AFV-P-2500A Programmable AC Source 2500VA/0-310VAC/ Hz AFV-P-2500B Programmable AC Source 2500VA/0-310VAC/40-500Hz AFV-P-5000A Programmable AC Source 5000VA/0-310VAC/ Hz AFV-P-5000B Programmable AC Source 5000VA/0-310VAC/40-500Hz Optonal Selectons Accessores GPIB Interface Board Analog Interface Board RS232 Cable (1.8m/female to male) Input Power Cord (30m/5.5m2/20A; 30m/14mm2/40A) Hgh Voltage Module 150% Overload Capablty for 1 Second Dmensons Unt: mm AFV-P-600/1250 AFV-P-2500 AFV-P *1 All specfcatons are subject to change wthout notce. *2 AFV-P-2500 s ±(1% FS + 5 counts).

5 Verson: 4P EN-A4