PRO- CRIMPER* III Hand

Size: px
Start display at page:

Download "PRO- CRIMPER* III Hand"

Transcription

1 PRO- CRIMPER* III Hand Instructon Sheet Crmpng Tool Assembly wth De Assembly MAY 11 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered hand tools. Hand tools are ntended for occasonal use and low volume applcatons. A wde selecton of powered applcaton equpment for extended -use, producton operatons s avalable. Locator Assembly (Suppled wth De Assembly) Front of Tool (Locator Sde) Statonary Jaw Pvot Pn Back of Tool (Wre Sde) De Assembly Movng Jaw Ratchet Adjustment Wheel The PRO -CRIMPER III Hand Crmpng Tool s a Commercal grade tool and s desgned prmarly for feld nstallaton, repar, mantenance work, or prototypng n ndustral, commercal, or nsttutonal applcatons. Product crmped wth ths tool wll meet the crmp heght requrement for hand tools n the approprate 114 seres specfcaton, but may not comply wth other feature parameters of the specfcaton. TE Connectvty offers a varety of tools to satsfy your performance requrements. For addtonal nformaton, contact the Toolng Assstance Center at Movng Handle PRO -CRIMPER III Hand Crmpng Tool Frame ( ) Statonary Handle TE De Assembly TE Locator Assembly{ Contact Wre Famly} Sze (AWG) Insul Da Strp Length Mn Unversal MATE -N -LOK* Connectors , (2) to 2.39 [.059 to.094] (2) 3.38 max [(2).133 max] 3.20 to 3.71 [.126 to.146] OR (2)3.50to3.99 [(2).138 to.157] { Suppled wth de assembly. Also avalable separately. } Contact the TOOLING ASSISTANCE CENTER or PRODUCT INFORMATION (see below) for specfc contact part numbers. Fgure 1 1. INTRODUCTION PRO--CRIMPER III Hand Crmpng Tool Assembly conssts of De Assembly and PRO--CRIMPER III Hand Crmpng Tool Frame The de assembly conssts of crmpng des and a locator assembly. Read these nstructons thoroughly before crmpng any contacts. Dmensons on ths sheet are n mllmeters [wth nch equvalents provded n brackets]. Fgures and llustratons are fordentfcaton only and are not drawn to scale. Reasons for ressue are provded n Secton 11, REVISION SUMMARY. E2011 Tyco Electroncs Corporaton, a TE Connectvty Ltd. Company All Rghts Reserved *Trademark TOOLING ASSISTANCE CENTER PRODUCT INFORMATION Ths controlled document s subject to change. For latest revson and Regonal Customer Servce, vst our webste at TE Connectvty, TE connectvty (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of ther respectve owners. 1 of 6 LOC B

2 Nut Locator Assembly Tool Frame Locator Chamfer Insulaton Crmper De Retanng Pns Wre Crmper Offset Wre Anvl Insulaton Anvl Chamfer De Retanng Screws Fgure 2 2. DESCRIPTION (Fgures 1 and 2) The tool features a tool frame wth a statonary jaw and handle, a movng jaw, a movng handle, and an adjustable ratchet that ensures full contact crmpng. The tool frame holds a de assembly wth two crmpng sectons. The de assembly features a wre anvl, an nsulaton anvl, a wre crmper, and an nsulaton crmper. Attached to the outsde of the frame s a locator assembly, whch contans a locator, a sprng retaner, and a contact support. De retanng pns and de retanng screws are used to poston and secure the des n the tool frame. A nut s used on the upper de retanng screw to hold the locator assembly n place. 3. INSTALLATION AND REMOVAL OF DIE SET AND LOCATOR ASSEMBLY (Fgure 2) 1. Open the tool handles and remove the two de retanng screws from the tool jaws. 2. Place the wre anvl and nsulaton anvl so that ther chamfered sdes and ther marked surfaces face outward, when mounted n the movng jaw of the tool frame. 3. Insert the two de retanng pns. 4. Insert the short de retanng screw through the jaw and through both anvl des, and tghten the screw just enough to hold the des n place. Do not tghten the screw completely at ths tme. 5. Place the wre crmper and nsulaton crmper so that ther chamfered sdes and ther marked surfaces face outward, when mounted n the statonary jaw of the tool frame. 6. Insert the two de retanng pns. 7. Insert the long de retanng screw through the jaw and through both crmper des, and tghten the screw just enough to hold the des n place. Do not tghten the screw completely at ths tme. 8. Carefully close the tool handles, makng sure that the anvls and crmpers algn properly. Contnue closng the tool handles untl the ratchet n the tool frame has engaged suffcently to hold the anvls and crmpers n place, then tghten both de retanng screws. 9. Place the locator assembly over the end of the long screw, and poston the locator assembly aganst the sde of the tool jaw. 10. Place the nut onto the end of the long screw and tghten the nut enough to hold the locator assembly n place, whle stll allowng the locator to slde up and down. 11. To dsassemble, close the tool handles untl the ratchet releases, remove the nut, the locator assembly, the two de retanng screws, and the four de retanng pns, and slde the anvls and crmpers out of the tool jaws. 2 of 6

3 4. CONTACT SUPPORT ADJUSTMENT (Fgure 3) The contact support s preset pror to shpment, but mnor adjustment may be necessary. 1. Make a sample crmp and determne f the contact s straght, bendng upward, or bendng downward. 2. If adjustment s requred, loosen the screw that holds the contact support onto the locator assembly. The ratchet has detents that create audble clcks as the tool handles are closed. 3. Place a contact wth wre nto the proper nest and close the tool handles untl the ratchet reaches the sxth clck, or untl the contact support touches the contact. 4. Slghtly loosen the nut that holds the locator assembly onto the tool frame. 5. Move the contact support as requred to elmnate the bendng of the contact. 6. Tghten the nut and close the handles untl the ratchet releases. 7. Remove and nspect the contact. 8. Make another sample crmp. If the contact s straght, tghten the contact support screw. If the contact s stll beng bent durng crmpng, repeat the adjustment procedure. 5. CRIMPING PROCEDURE Ths tool s provded wth a crmp adjustment feature. Intally, the crmp heght should be verfed as specfed n Fgure 4. Refer to Secton 6, CRIMP HEIGHT INSPECTION, and Secton 7, RATCHET ADJUSTMENT, to verfy crmp heght before usng the tool to crmp desred contacts and wre szes. Refer to the table n Fgure 1 and select wre of the specfed sze and nsulaton dameter. Strp the wre to the length ndcated n Fgure 1, takng care not to nck or cut wre strands. Select an applcable contact and dentfy the approprate crmp secton accordng to the wre sze markngs on the tool. Refer to Fgure 3 and proceed as follows: 1. Hold the tool so that the back (wre sde) s facng you. Squeeze tool handles together and allow them to open fully. 2. Holdng the contact by the matng end, nsert the contact nsulaton barrel frst through the front of the tool and nto the approprate crmp secton. 3. Poston the contact so that the matng end of the contact s on the locator sde of the tool, and so that the open U of the wre and nsulaton barrels face the top of the tool. Place the contact up nto the nest so that the movable locator drops nto the slot n the contact. Refer to Fgure 3. Butt the front end of the wre barrel aganst the movable locator. CAUTION! Make sure that both sdes of the nsulaton barrel are started evenly nto the crmpng secton. Do NOT attempt to crmp an mproperly postoned contact. Contact Support Locator Adjustment Screw for Contact Support Back of Tool (Wre Sde) Contact (Typ) Strp Length Wre Locator n Wre Stop Slot Wre Inserted to Stop Fgure 3 3 of 6

4 4. Hold the contact n poston and squeeze the tool handles together untl ratchet engages suffcently to hold the contact n poston. Do NOT deform nsulaton barrel or wre barrel. 5. Insert strpped wre nto contact nsulaton and wre barrels untl t s butted aganst the wre stop, as shown n Fgure Holdng the wre n place, squeeze tool handles together untl ratchet releases. Allow tool handles to open and remove crmped contact. The crmped contact may stck n the crmpng area, but the contact can be easly removed by pushng downward on the top of the locator (see Fgure 3). 7. Check the contact s crmp heght as descrbed n Secton 6, CRIMP HEIGHT INSPECTION. If necessary, adjust the crmp heght as descrbed n Secton 7, RATCHET (Crmp Heght) ADJUSTMENT. 6. CRIMP HEIGHT INSPECTION Crmp heght nspecton s performed through the use of a mcrometer wth a modfed anvl, commonly referred to as a crmp--heght comparator. TE does not manufacture or market crmp--heght comparators. Detaled nformaton on obtanng and usng crmp--heght comparators can be found n nstructon sheet Proceed as follows: 1. Refer to Fgure 4 and select a wre (maxmum sze) for each crmp secton lsted. 2. Refer to Secton 5, CRIMPING PROCEDURE, and crmp the contact(s) accordngly. Poston Pont on Center of Wre Barrel Opposte Seam Modfed Anvl A Crmp Heght Wre Sze Crmp Secton Dmenson A AWG (Max) (Wre Sze Markng) (+0.05 [+.002]) [.032] 18 18, (2) [.040] Fgure 4 3. Usng a crmp heght comparator, measure the wre barrel crmp heght as shown n Fgure 4. If the crmp heght conforms to that shown n the table, the tool s consdered dmensonally correct. If not, the tool must be adjusted. Refer to Secton 7, RATCHET (Crmp Heght) ADJUSTMENT. 7. RATCHET (Crmp Heght) ADJUSTMENT (Fgure 5) 1. Remove the lockscrew from the ratchet adjustment wheel. Ratchet Adjustment Wheel Screwdrver Lockscrew (Typ) Fgure 5 2. Wth a screwdrver, adjust the ratchet wheel from the locator sde of the tool. 3. Observe the ratchet adjustment wheel. If a tghter crmp s requred, rotate the adjustment wheel COUNTERCLOCKWISE to a hgher--numbered settng. If a looser crmp s requred, rotate the adjustment wheel CLOCKWISE to a lower--numbered settng. 4. Replace the lockscrew. 5. Make a sample crmp and measure the crmp heght. If the dmenson s acceptable, replace and secure the lockscrew. If the dmenson s unacceptable, contnue to adjust the ratchet, and agan measure a sample crmp. 8. MAINTENANCE Ensure that the tool and des are clean by wpng them wth a clean, soft cloth. Remove any debrs wth a clean, soft brush. Do not use objects that could damage the tool. When not n use, keep handles closed to prevent objects from becomng lodged n the crmpng des, and store n a clean, dry area. 4 of 6

5 9. VISUAL INSPECTION The crmpng des should be nspected on a regular bass to ensure that they have not become worn or damaged. Inspect the crmp sectons for flattened, chpped, worn, or broken areas. If damage or abnormal wear s evdent, the tool must be replaced. See Secton 10, REPLACEMENT. 10. REPLACEMENT Customer--replaceable parts are shown n Fgure 1. Avalable separately, PRO--CRIMPER III Hand Crmpng Tool Repar Kt ncludes a replacement nut and a varety of pns, rngs, screws, and sprngs. If the des are damaged or worn excessvely, they must be replaced. Order the repar kt and replaceable parts through your TE representatve, or call , or send a facsmle of your purchase order to , or wrte to: CUSTOMER SERVICE (38--35) TYCO ELECTRONICS PO BOX 3608 HARRISBURG PA REVISION SUMMARY Revsons to ths nstructon sheet nclude: S Updated document to corporate requrements. 5 of 6

6 Toolng Used Wth Des PRO-CRIMPER III Hand Tool (Instructon Sheet ) SDE PEW- 12 Hand Tool (Instructon Sheet ) SDE Bench Termnator (Customer Manual ) 626 Adapter (Instructon Sheet ) Battery Tool (Shouldered De) , - 2 (Customer Manual ) Battery Tool (Pn De) , - 2 (Customer Manual ) 6 of 6

PRO-CRIMPER* III Hand. with Die Assembly OCT 11 Rev C. Pivot Pin. Die Assembly Moving Jaw CONTACT FAMILY SIZE (AWG)

PRO-CRIMPER* III Hand. with Die Assembly OCT 11 Rev C. Pivot Pin. Die Assembly Moving Jaw CONTACT FAMILY SIZE (AWG) PRO-CRIMPER* III Hand Instructon Sheet Crmpng Tool Assembly 58514-1 408-9973 wth De Assembly 58514-2 12 OCT 11 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

PRO- CRIMPER* III Hand

PRO- CRIMPER* III Hand PRO- CRIMPER* III Hand Instructon Sheet Crmpng Tool Assembly 58529-1 408-9999 wth De Assembly 58529-2 11 AUG 14 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

PRO- CRIMPER* III Hand Crimping

PRO- CRIMPER* III Hand Crimping PRO- CRIMPER* III Hand Crmpng Instructon Sheet Tool Assembly 58641-1 wth 408-4379 De Assembly 58641-2 18 JUN 09 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

PRO-CRIMPER* III Hand Crimping Tool Assembly with Die AssemblY

PRO-CRIMPER* III Hand Crimping Tool Assembly with Die AssemblY PRO-CRIMPER* III Hand Crmpng Tool Assembly 90758-1 wth De AssemblY 90758-2 Instructon Sheet 408-9938 01 NOV 11 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

PRO- CRIMPER III Hand Crimping Tool Assembly INSTALLATION AND REMOVAL OF DIE SET AND LOCATOR ASSEMBLY (Figure 2)

PRO- CRIMPER III Hand Crimping Tool Assembly INSTALLATION AND REMOVAL OF DIE SET AND LOCATOR ASSEMBLY (Figure 2) PRO- CRIMPER* III Hand Crmpng Instructon Sheet Tool Assembly 90547-1 wth 408-9884 De Assembly 90547-2 02 NOV 09 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

PRO- CRIMPER III Hand Crimping Tool Assembly DESCRIPTION (Figures 1 and 2)

PRO- CRIMPER III Hand Crimping Tool Assembly DESCRIPTION (Figures 1 and 2) PRO- CRIMPER* III Hand Crmpng Instructon Sheet Tool Assembly 58495-1 408-9819 Wth De Assembly 58495-2 22 JUL 09 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

PRO- CRIMPER* III Hand Crimping

PRO- CRIMPER* III Hand Crimping PRO- CRIMPER* III Hand Crmpng Instructon Sheet Tool 58448-2 408-9357 Wth De 58448-3 10 Mar 11 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered hand

More information

PRO- CRIMPER* III Hand Crimping

PRO- CRIMPER* III Hand Crimping PRO- CRIMPER* III Hand Crmpng Instructon Sheet Tool Assembly 91338-1 408-8377 wth De Assembly 91338-2 22 JUL 09 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

PRO-CRIMPER* III Hand Tool Assembly with Die Assembly

PRO-CRIMPER* III Hand Tool Assembly with Die Assembly PRO-CRIMPER* III Hand Tool Assembly 2063778-1 wth De Assembly 2063778-2 Instructon Sheet 408-10290 02 FEB 12 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

onlinecomponents.com

onlinecomponents.com PRO- CRIMPER* III Hand Crmpng Instructon Sheet Tool Assembly 58535-1 wth 408-4021 De Assembly 58535-2 29 JUL 09 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

PRO- CRIMPER* III Hand

PRO- CRIMPER* III Hand PRO- CRIMPER* III Hand Instructon Sheet Crmpng Tool Assembly 90684-1 408-9934 wth De Assembly 90684-2 09 OCT 09 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

PRO-CRIMPER* III Hand Crimping Tool Assembly with Die Assembly

PRO-CRIMPER* III Hand Crimping Tool Assembly with Die Assembly PRO-CRIMPER* III Hand Crmpng Tool Assembly 90548-1 wth De Assembly 90548-2 Instructon Sheet 408-9885 02 NOV 12 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

Instruction Sheet SDE- SA Hand Tool Assembly with Die Assembly

Instruction Sheet SDE- SA Hand Tool Assembly with Die Assembly Instructon Sheet 408-10002 wth De Assembly 1752938-2 06 APR 10 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered hand tools. Hand tools are ntended for

More information

SDE PEW- 12 Hand Tool

SDE PEW- 12 Hand Tool SDE PEW- 12 Hand Tool Instructon Sheet Assembly 2063956-1 wth 408-10370 De Assembly 2063956-2 07 OCT 10 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered

More information

PRO-CRIMPER* III Hand Crimping Tool Assembly and Die Assemblies [ ]

PRO-CRIMPER* III Hand Crimping Tool Assembly and Die Assemblies [ ] PRO-CRIMPER* III Hand Crmpng Tool Assembly 58546-1 and De Assembles 58545-[ ] Instructon Sheet 408-8678 13 MAR 14 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

Insertion/Extraction Tool and Replacement Tip Kits [ ]

Insertion/Extraction Tool and Replacement Tip Kits [ ] Inserton/Extracton Tool 91285-1 and Replacement Tp Kts 543382-[ ] Instructon Sheet 408-9404 19 JUN 12 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered

More information

Hand Crimping Tool (For Insulated Heat Shrink Splices)

Hand Crimping Tool (For Insulated Heat Shrink Splices) Hand Crmpng Tool 607949-1 (For Insulated Heat Shrnk Splces) Instructon Sheet 408-4087 23 JAN 12 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered hand

More information

Locator Pin Indexing Pin. Wire Size Marking CAUTION NOTE TOOLING ASSISTANCE CENTER PRODUCT INFORMATION

Locator Pin Indexing Pin. Wire Size Marking CAUTION NOTE TOOLING ASSISTANCE CENTER PRODUCT INFORMATION ROTA-CRIMP* Crmpng Tool Instructon Sheet 408-2681 68321-1 13 APR 12 Statonary De (Nest) Anvl De Hold-Down Devce and Contact Locator Front of Tool Locator Pn Indexng Pn Wre Sze Markng The hold-down devce

More information

STRATO-THERM* Terminal and Splice Hand Crimping Tools and 59461

STRATO-THERM* Terminal and Splice Hand Crimping Tools and 59461 STRATO-THERM* Termnal and Splce Hand Crmpng Tools 59294 and 59461 Instructon Sheet 408-1259 17 AUG 10 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered

More information

Instruction Sheet ROTA- CRIMP* Hand Crimping Tools and

Instruction Sheet ROTA- CRIMP* Hand Crimping Tools and Instructon Sheet ROTA- CRIMP* Hand Crmpng Tools 08-09 6007 and 6007- APR PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered hand tools. Hand tools are

More information

PRO- CRIMPER* III Hand Crimping

PRO- CRIMPER* III Hand Crimping PRO- CRIMPER* III Hand Crimping Instruction Sheet Tool Assembly 58448-2 408-9357 With Die Assembly 58448-3 10 Mar 11 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use

More information

Instruction Sheet AMPMODU* MTE CONNECTORS Mar 11 Rev A

Instruction Sheet AMPMODU* MTE CONNECTORS Mar 11 Rev A Instructon Sheet AMPMODU* MTE CONNECTORS 408-6919 10 Mar 11 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered hand tools. Hand tools are ntended for

More information

onlinecomponents.com

onlinecomponents.com Figure 1 PRO CRIMPER III Hand Crimping Tool Assembly 58603 1 consists of Die Assembly 58603 2 and PRO CRIMPER III Hand Tool Frame 354940 1. The die assembly consists of crimping dies and a locator assembly.

More information

Terminating Tools

Terminating Tools Termnatng Tools 2-231652- 5 Instructon Sheet and 2-231652- 9 for 408-9770 DEConnect Modular Plugs 29 NOV 10 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually

More information

Read these instructions thoroughly before crimping any contacts.

Read these instructions thoroughly before crimping any contacts. PRO CRIMPER III Hand Crimping Tool Assembly 58583 1 consists of Die Assembly 58583 2 and PRO CRIMPER III Hand Crimping Tool Frame 354940 1. The die assembly consists of crimping dies and a locator assembly.

More information

AUG 15 Rev M

AUG 15 Rev M ORIGINAL INSTRUCTIONS PRO-CRIMPER III Hand Crimping Tool Assembly 58433-3 with Die Assembly 58423-1 Instruction Sheet 408-9252 21 AUG 15 Rev M PROPER USE GUIDELINES Cumulative Trauma Disorders can result

More information

Shur-Plug*.156 Diameter Terminals and Receptacle Contacts

Shur-Plug*.156 Diameter Terminals and Receptacle Contacts Shur-Plug*.156 Dameter Termnals and Receptacle Contacts Applcaton Specfcaton 114-2042 07 NOV 12 All numercal values are n metrc unts [wth U.S. customary unts n brackets]. Dmensons are n mllmeters [and

More information

MCP 2.8 mm Contact System and Wire Seal for 1P Starter Motor Connectors

MCP 2.8 mm Contact System and Wire Seal for 1P Starter Motor Connectors MCP 2.8 mm Contact System and Wre Seal for 1P Starter Motor Connectors Applcaton Specfcaton 114-13295 05 MAY 11 All numercal values are n metrc unts [wth U.S. customary unts n brackets]. Dmensons are n

More information

A socket contact support (supplied separately) must be installed onto the locator assembly.

A socket contact support (supplied separately) must be installed onto the locator assembly. Figure 1 PRO CRIMPER III Hand Tool Assembly 1976444 1 consists of PRO CRIMPER III Hand Tool Frame 354940 1 and Die Assembly 1976444 2. The tool assembly is used to crimp the contacts listed in Figure 1.

More information

Pneumatic Power Bench Assembly

Pneumatic Power Bench Assembly Pneumatc Power Bench Assembly 58338-1 Instructon Sheet 408-9393 09 AUG 11 Fgure 1 1. INTRODUCTION Pneumatc Power Bench Assembly 58338-1 s a pneumatc power unt desgned to accept a varety of nterchangeable

More information

JUL 15 Rev E

JUL 15 Rev E ORIGINAL INSTRUCTIONS SDE PEW-12 Hand Crimping Tool Assembly 2031734-1 with Die Assembly 2031734-2 Instruction Sheet 408-10243 02 JUL 15 Rev E PROPER USE GUIDELINES Cumulative Trauma Disorders can result

More information

SDE Electric Bench Terminator READ THIS FIRST! customer manual TOOLING ASSISTANCE CENTER

SDE Electric Bench Terminator READ THIS FIRST! customer manual TOOLING ASSISTANCE CENTER SDE Electrc Bench Termnator 1490076-2 Customer Manual 409-10052 31 JAN 12 customer manual SAFETY A. PRECAUTIONS READ THIS FIRST!............................ 2 1. INTRODUCTION........................................................

More information

AMPINNERGY* Modular Wiring System 25 JUL 11 Rev G

AMPINNERGY* Modular Wiring System 25 JUL 11 Rev G Applcaton Specfcaton 114-6039 AMPINNERGY* Modular Wrng System 25 JUL 11 Rev G All numercal values are n metrc unts [wth U.S. customary unts n brackets]. Dmensons are n mllmeters [and nches]. Unless otherwse

More information

Connector Assemblies 06 JUN 11 Rev C

Connector Assemblies 06 JUN 11 Rev C Applcaton Specfcaton Power Seres 50 114-13071 Connector Assembles 06 JUN 11 All numercal values are n metrc unts [wth U.S. customary unts n brackets]. Dmensons are n mllmeters [and nches]. Unless otherwse

More information

Type III+ (Size 16) Contacts 15 MAR 11 Rev L

Type III+ (Size 16) Contacts 15 MAR 11 Rev L Applcaton Specfcaton 114-10004 Type III+ (Sze 16) Contacts 15 MAR 11 Rev L NOTE All numercal values are n metrc unts [wth U.S. customary unts n brackets]. Dmensons are n mllmeters [and nches]. Unless otherwse

More information

Hand Crimping Tools , , and AUG 12 Rev D

Hand Crimping Tools , , and AUG 12 Rev D Instruction Sheet 408-7332 Hand Tools 90123-2, 90123-5, and 90124-2 29 AUG 12 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools

More information

Ultra- Fast Series 110, 125,

Ultra- Fast Series 110, 125, Ultra- Fast Seres 0, 25, Applcaton Specfcaton 87, 205, and 250 Fully- Insulated 4-223 FASTON* Termnals 22 FEB 3 Rev H All numercal values are n metrc unts [wth U.S. customary unts n brackets]. Dmensons

More information

Hand Crimping Tool [ ]

Hand Crimping Tool [ ] 408-8738 Revision T, Jan. 2017 PRO-CRIMPER III Hand Crimping Tool 790163-[ ] 1. Introduction PRO-CRIMPER III Hand Crimping Tool Assembly 790163-[ ] consists of PRO-CRIMPER III Hand Tool Frame 354940-1

More information

Terminal and Splice , , and JUN 12 Rev D NOTE. CERTI-CRIMP* Hand Crimping Tool Ratchet Control CAUTION NOTE

Terminal and Splice , , and JUN 12 Rev D NOTE. CERTI-CRIMP* Hand Crimping Tool Ratchet Control CAUTION NOTE Terminal and Splice Instruction Sheet Crimping Tools 408-1254 69339, 69354-1, and 69355 11 JUN 12 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered

More information

Crimping Dies for TERMINYL* and PLASTI-GRIP* Terminals and Splices

Crimping Dies for TERMINYL* and PLASTI-GRIP* Terminals and Splices Crimping Dies for TERMINYL* and PLASTI-GRIP* Terminals and Splices Instruction Sheet 408-10051 11 APR 17 Rev D PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually

More information

Terminals and Splices 19 OCT 11 Rev D. Crimping Dies for Head Numbers 69065, 69067, and Hand Tool Yoke. Place Screwdriver Here to Remove Dies

Terminals and Splices 19 OCT 11 Rev D. Crimping Dies for Head Numbers 69065, 69067, and Hand Tool Yoke. Place Screwdriver Here to Remove Dies Instruction Sheet Crimping Dies for SOLISTRAND* 408-9786 Terminals and Splices 19 OCT 11 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.

More information

SOLISTRAND* Crimping Dies

SOLISTRAND* Crimping Dies SOLISTRAND* Crimping Dies Instruction Sheet (Used in Crimping Heads 08-697 69097 and 69099) 5 APR Terminals Butt Splices Parallel Splices = Wire Barrel DIE SET NUMBERS FOR DIE SET CRIMPING HEAD 69097 NUMBERS

More information

SOLISTRAND* Flag Terminal Crimping Dies

SOLISTRAND* Flag Terminal Crimping Dies SOLISTRAND* Flag Terminal Crimping Dies Instruction Sheet 408-8908 22 DEC 10 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools

More information

Crimping Dies; PN thru 47825, 47915, and 47918

Crimping Dies; PN thru 47825, 47915, and 47918 Crimping Dies; PN 47820 thru 47825, 47915, and 47918 Instruction Sheet 408-1729 22 NOV 16 Rev K Crimping Dies; PN 47820 thru 47825, 47915, and 47918 (Typical) Crimping Die Wire Size Part Number Color Code

More information

Crimping Die Assemblies , , , , , , , , and 69653

Crimping Die Assemblies , , , , , , , , and 69653 Crimping Die Assemblies 46754-2, 46755-2, 46756-2, 46757-2, 46758-2, 46759-2, 46760-2, 59870-1, and 69653 Instruction Sheet 408-1602 10 NOV 16 Rev C 1. INTRODUCTION WIRE SIZE (MCM) (1) CMA (Circular Mil

More information

DESCRIPTION 3. DIE INSTALLATION AND REMOVAL Die Removal (Figure 3) 3.1. Die Installation (Figure 3) Hydraulic Hand Tool

DESCRIPTION 3. DIE INSTALLATION AND REMOVAL Die Removal (Figure 3) 3.1. Die Installation (Figure 3) Hydraulic Hand Tool Crimping Dies Instruction Sheet for SOLISTRAND* 08 869 s and Splices 9 APR PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools

More information

Dynamic Optimization. Assignment 1. Sasanka Nagavalli January 29, 2013 Robotics Institute Carnegie Mellon University

Dynamic Optimization. Assignment 1. Sasanka Nagavalli January 29, 2013 Robotics Institute Carnegie Mellon University Dynamc Optmzaton Assgnment 1 Sasanka Nagavall snagaval@andrew.cmu.edu 16-745 January 29, 213 Robotcs Insttute Carnege Mellon Unversty Table of Contents 1. Problem and Approach... 1 2. Optmzaton wthout

More information

OCT 14 Rev K

OCT 14 Rev K ORIGINAL INSTRUCTIONS Hand Crimping Tool 68026 for TERMI-FOIL* Product Instruction Sheet 408-2363 27 OCT 14 Rev K PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of

More information

Hydraulic Hand Crimping Tool, PN

Hydraulic Hand Crimping Tool, PN ORIGINAL INSTRUCTIONS Hydraulic Hand Crimping Tool, PN 59975-1 Instruction Sheet 408-6758 21 JUN 17 Rev F PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually

More information

INSTRUCTION MANUAL BENCH LATHE

INSTRUCTION MANUAL BENCH LATHE WLLOUGHBY COMMUNTY MEN'S SHED mens 296C Salors Bay Road, l _ L^ NORTHBRDGE N.S.W 2063 The Wlkmghby Communty" NSTRUCTON MANUAL BENCH LATHE Before usng be sure to read ths manual carefully -C6- Safety nstructons

More information

Instruction Sheet 2 mm Common Termination (CT) Head Assembly

Instruction Sheet 2 mm Common Termination (CT) Head Assembly Instruction Sheet 2 mm Common Termination (CT) 408-9426 Head Assembly 58372-1 05 MAY 14 Wire Inserter (Shown In Up Position) Carriage Drag Wire Guide Feed Pawl (Portion of Head Assembly Shown Cut Away

More information

Crimping Dies for SOLISTRAND* Terminals and Splices

Crimping Dies for SOLISTRAND* Terminals and Splices ORIGINAL INSTRUCTIONS Crimping Dies for SOLISTRAND* Terminals and Splices Instruction Sheet 408-8691 02 AUG 18 Rev H1 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use

More information

MICROWAVE HOOD COMBINATION INSTALLATIONINSTRUCTIONS

MICROWAVE HOOD COMBINATION INSTALLATIONINSTRUCTIONS MICROWVE HOOD COMINTION INSTLLTIONINSTRUCTIONS Ths product s sutable for use above electrc or gas cookng products up to 36" (91.4 cm) wde. These nstallaton nstructons cover dfferent models. The appearance

More information

FEB 18 Rev D

FEB 18 Rev D ORIGINAL INSTRUCTIONS Terminal and Splice Crimping Die Assemblies Instruction Sheet 408-1632 01 FEB 18 Rev D PROPER USE GUIDELINES Cumulative trauma disorders can result from the prolonged use of manually

More information

MULTIPOLE CONNECTORS SQUICH CN NEW SQUICH. Connections without tools reduced space SQUICH A TIMESAVER

MULTIPOLE CONNECTORS SQUICH CN NEW SQUICH. Connections without tools reduced space SQUICH A TIMESAVER SCREW CONNECTION ULTIPOLE CONNECTORS SQUICH CN SQUICH SQUICH Connectons wthout tools reduced space A TIESAVER SQUICH ULTIPOLE CONNECTORS SQUICH CN SQUICH seres Connectons wthout tools To mprove hgh performance

More information

APR 15 Rev A

APR 15 Rev A ORIGINAL INSTRUCTIONS CERTI-CRIMP* Hand Tools 47386-4, 47387-7, and 525690-1 Instruction Sheet 411-1050 24 APR 15 Rev A PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use

More information

OCT 15 Rev E

OCT 15 Rev E ORIGINAL INSTRUCTIONS Coaxial Cable Stripper Kits 603995-[ ] Instruction Sheet 408-2766 09 OCT 15 Rev E PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered

More information

current activity shows on the top right corner in green. The steps appear in yellow

current activity shows on the top right corner in green. The steps appear in yellow Browzwear Tutorals Tutoral ntroducton Ths tutoral leads you through the basc garment creaton process usng an llustrated step by step approach. Each slde shows the actual applcaton at the stage of the acton

More information

Customer witness testing guide

Customer witness testing guide Customer wtness testng gude Ths gude s amed at explanng why we need to wtness test equpment whch s beng connected to our network, what we actually do when we complete ths testng, and what you can do to

More information

High Current Pin and Socket Contacts 31 JUL 13 Rev C

High Current Pin and Socket Contacts 31 JUL 13 Rev C Application Specification High Current Pin and Socket Contacts 31 JUL 13 NOTE NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and

More information

TITLE ASSEMBLY DRAWING MTA - 5" APPROVALS DRAWN DATE

TITLE ASSEMBLY DRAWING MTA - 5 APPROVALS DRAWN DATE REV. DESCRPTON APPROVED A SEE DCN: 7762 0/29/200 ha k9, EXPRESS PROR WRTTEN CONSENT OF CELESCO TRANSDUCER PRODUCTS N( 20630 Plummer st Chatsworth, CA. 93 G MTA 5" E.GARCA 029200 SZE CODE DENT. NO DWG.

More information

This instruction sheet covers the application and maintenance procedures for Crimping Die Assembly

This instruction sheet covers the application and maintenance procedures for Crimping Die Assembly Figure 1 This instruction sheet covers the application and maintenance procedures for Crimping Die Assembly 318106 1. For additional information on COPALUM terminals and splices, refer to Catalog 82020.

More information

MICROWAVEHOODCOMBINATION INSTALLATIONINSTRUCTIONS

MICROWAVEHOODCOMBINATION INSTALLATIONINSTRUCTIONS MCROWVEHOODCOMNTON NSTLLTONNSTRUCTONS Ths product s sutable for use above electrc or gas cookng products up to and ncludng 36" (91.4 cm) wde. See "nstallaton Requrements" secton for further notes. These

More information

How to Get Started with Virtual Goalie

How to Get Started with Virtual Goalie How to Get Started wth Vrtual Goale HTC VIVE Set up your computer and moble devce Acqure a vrtual realty-enabled computer and the HTC Vve. For hardware specs, to test your computer, or to order from Amazon,

More information

Instructions for Use. PetChatz.com. PetChatz.com

Instructions for Use. PetChatz.com. PetChatz.com Instructons for Use PetChatz.com PetChatz.com POWER ON/OFF LED PET-SAFE MICROPHONE SOUND DETECTOR MANUAL TREAT RELEASE LOW TREAT LED LOW-LIGHT HD CAMERA for hgh-qualty vdeo MOTION DETECTION FULL-COLOR

More information

C O N C E A L E D F I X I N G. PH:

C O N C E A L E D F I X I N G.   PH: C O N C E A L E D I X I N G D I Y S l a t Systems PH: 1300 336 237 Alumnum Concealed xng Slat Systems Our Concealed xng Alumnum Slat range offers the latest n archtectural style combned wth a unque nstall

More information

VRT014 User s guide V0.8. Address: Saltoniškių g. 10c, Vilnius LT-08105, Phone: (370-5) , Fax: (370-5) ,

VRT014 User s guide V0.8. Address: Saltoniškių g. 10c, Vilnius LT-08105, Phone: (370-5) , Fax: (370-5) , VRT014 User s gude V0.8 Thank you for purchasng our product. We hope ths user-frendly devce wll be helpful n realsng your deas and brngng comfort to your lfe. Please take few mnutes to read ths manual

More information

instructions packaged with the tools or contact the Tooling Assistance Center number at the bottom of this page.

instructions packaged with the tools or contact the Tooling Assistance Center number at the bottom of this page. This instruction sheet provides instructions on product application, and maintenance and inspection procedures for SOLISTRAND Crimping Dies which are used in Crimping Heads 69097 and 69099. See Figure

More information

Refer to Figure 2 and select the appropriate wire, die assembly, and terminal or splice. Strip the wire to the length indicated in the table.

Refer to Figure 2 and select the appropriate wire, die assembly, and terminal or splice. Strip the wire to the length indicated in the table. The die assemblies consist of stationary dies (nests) and moving dies (anvils). Refer to Figure 2 to ensure the compatibility of die assemblies, crimping heads, and terminals and splices. The shanks on

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63828-0200 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

Order Number

Order Number Order Number 200218-5500 FEATURES Application Tooling Specification TYPE 4D A full-cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision user-friendly

More information

HV Modular Die Holder (With Fine Adjust), PN

HV Modular Die Holder (With Fine Adjust), PN HV Modular Die Holder (With Fine Adjust), PN 2305470-1 Instruction Sheet 408-35048 24 DEC 18 Rev B INTRODUCTION Figure 1 The HV Modular Die Holder with Fine Adjust (PN 2305470-1) is a product line that

More information

Application Tooling Specification

Application Tooling Specification Order No. 63828-1200 Application Tooling Specification Type 4D FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision, user-friendly

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL FEATURES Application Tooling Specification Sheet TYPE 4D Order No. 63827-1400 A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

2E - 3E High Wind Kit Manual

2E - 3E High Wind Kit Manual Yag Dpole Vertcal (Patent# 6,677,914 E - 3E Hgh Wnd Kt Manual Antarctca at 7 mph SteppIR Antennas 11-116th Ave NE, Sute -, Bellevue, WA 984 Tel: 4-43-191 Fax: 4-46-441 Tech Support: 4-891-6134 www.steppr.com

More information

Strain Gauge Measuring Amplifier BA 660

Strain Gauge Measuring Amplifier BA 660 Stran Gauge Measurng Amplfer BA 660 Orgnal of the Manual BA660 / IP20 BA660 / IP66 Table of Contents 1. Safety precautons...2 1.1. Feld of applcaton...2 1.2. Installaton...2 1.3. Mantenance...2 2. Functon...2

More information

Nordic - 2 Door Wardrobe

Nordic - 2 Door Wardrobe Nordc - 2 oor Wardrobe ssembly Instructons - lease keep for future reference 62967 mensons Wdth : 8. cm epth : 49,0 cm Heght : 9, cm Important - lease read these nstructons fully before startng assembly

More information

1. Turn off or disconnect power to unit (machine). 2. Push IN the release bar on the quick change base plate. Locking latch will pivot downward.

1. Turn off or disconnect power to unit (machine). 2. Push IN the release bar on the quick change base plate. Locking latch will pivot downward. Figure 1 Miniature Quick Change Applicators, of the end feed type, are designed to crimp end feed strip terminals to prestripped wires. Each applicator is set up to accept the strip form of certain specific

More information

MTBF PREDICTION REPORT

MTBF PREDICTION REPORT MTBF PREDICTION REPORT PRODUCT NAME: BLE112-A-V2 Issued date: 01-23-2015 Rev:1.0 Copyrght@2015 Bluegga Technologes. All rghts reserved. 1 MTBF PREDICTION REPORT... 1 PRODUCT NAME: BLE112-A-V2... 1 1.0

More information

Application Tooling Specification

Application Tooling Specification Order No. 63819-0901 Application Tooling Specification Type 4D FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision, user-friendly

More information

Order Number

Order Number Order Number 200218-5900 FEATURES Application Tooling Specification TYPE 4D A full-cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision user-friendly

More information

1. Actuate the upper die release button located in the C head or closed head. 2. Slide the nest into place in C head or closed head. See Figure 2.

1. Actuate the upper die release button located in the C head or closed head. 2. Slide the nest into place in C head or closed head. See Figure 2. The die assemblies consist of stationary dies (nests) and moving dies (anvils). The dies are retained in the crimp tool by retainer pins. Refer to the table in Figure 3 to ensure the compatibility of die

More information

SERVICE MANUAL

SERVICE MANUAL SERVCE MANUAL SEWNG MACHNE MODELS 11602090 12714090 TABLE OF CONTENTS. LOCATE AND DENTFY THE PARTS... 2. WND THE BOBBN... 3. PREPARE YOUR TOP THREAD..., STTCH SELECTOR/STTCH LENGTH CONTROLS... 4- & 4-2

More information

Instruction Sheet Tool Kit [ ] (for SL Series 110 Jack Connectors)

Instruction Sheet Tool Kit [ ] (for SL Series 110 Jack Connectors) Instruction Sheet Tool Kit 1725150 [ ] (for SL Series 110 Jack Connectors) 26 FEB 04 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63819-0400 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

VS- 3 Hand Tool Kits , , and

VS- 3 Hand Tool Kits , , and VS- 3 Hand Tool Kits 244271-1, 244271-5, and 244271-6 Instruction Sheet 408-7280 Jan 2017 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.

More information

Application Tooling Specification

Application Tooling Specification Order No. 200218-2200 Application Tooling Specification Type 4D FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision, user-friendly

More information

Premier Garden Shed Assembly Instructions Model: J30232GK

Premier Garden Shed Assembly Instructions Model: J30232GK Assembly Instructons Model: J303GK 360mm (7.7") CONCRETE SLAB 300mm (0.7'') FRONT: 3.0m (9.84") SIDE:.6m (7.4") HEIGHT:.m (6.88") WHEN LAYING YOUR CONCRETE SLAB, CHAMFER THE 50mm EDGES DOWNWARDS BY 0mm

More information

Online Reporting. Online Reporting. A step-by-step guide. Important information for churches, schools and organisations

Online Reporting. Online Reporting. A step-by-step guide.   Important information for churches, schools and organisations Onlne Reportng Onlne Reportng A step-by-step gude www.olr.ccl.com Important nformaton for churches, schools and organsatons May 2016 Reportng s a vtal part of beng a lcence holder... Reportng s a requrement

More information

ph fax

ph fax www.customron.com ph 800.732.7699 fax 507.732.7837 Balusters, pckets, spndles these are the bones of a star ralng system. At Custom Iron, we commonly refer to these as balusters. And, uncommonly, we nvent

More information

Absco Space Saver Shed Assembly Instructions Model: 23081SK

Absco Space Saver Shed Assembly Instructions Model: 23081SK Assembly Instructons Model: 2308SK FRONT BASE LENGTH: 2.26m SIDE BASE LENGTH: 0.78m FRONT WALL HEIGHT:.80m REAR WALL HEIGHT:.95m CONCRETE SLAB 880mm 2360mm WHEN LAYING YOUR CONCRETE SLAB, CHAMFER THE 50mm

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet Hand Crimp Tool Application Tooling Specification Sheet TYPE 4D Order No. 63819-1300 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL FEATURES Application Tooling Specification Sheet TYPE 4D Order No. 200218-2400 A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL FEATURES Application Tooling Specification Sheet TYPE 4D Order No. 200218-1700 A full-cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63819-0000 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63825-8200 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

Nordic - 2 Door 2 Drawer Tallboy

Nordic - 2 Door 2 Drawer Tallboy Nordc - oor rawer allboy ssembly Instructons - lease keep for future reference 66390 mensons Wdth : 8. cm epth : 49,0 cm Heght : 5,9 cm Important - lease read these nstructons fully before startng assembly

More information

STAR POWER BOM/BOQ SETTING IDEA 1 - TWIST & SHOUT

STAR POWER BOM/BOQ SETTING IDEA 1 - TWIST & SHOUT Below are two deas for settng your blocks together. Of course, there are dozens more! Take your blocks out to play, and decde on a settng that makes you smle! STAR POWER BOM/BOQ SETTING IDEA 1 - TWIST

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63819-1000 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

Absco Space Saver Shed Assembly Instructions Model: J30082S

Absco Space Saver Shed Assembly Instructions Model: J30082S Assembly Instructons FRONT BASE LENGTH: 9ft-0-7 64n SIDE BASE LENGTH: ft-6-45 64n FRONT WALL HEIGHT: 5ft-0-55 64n REAR WALL HEIGHT: 6ft-4-49 64n ft-0-4 64n CONCRETE SLAB 0ft--3 64n CONCRETE SLAB WHEN LAYING

More information