HEADER & HOUSING SYSTEMS
|
|
|
- Lorena Hubbard
- 5 years ago
- Views:
Transcription
1 dam Technologies, Inc. HEDER & HOUSING SYSTEMS.8mm, 1mm, 1.25mm, 1.5mm, 2mm & 2.5mm INTRODUTION: dam Tech 2H & 2SH Series of multiple pitch Headers and Housings are a matched set of rimp Wire Housings and P mounted Shrouded Headers available in Straight, Right ngle or SMT orientation. Offered in three popular industry standard styles they provide a lightweight, fine pitched, polarized, high reliability connection system. FETURES: Multiple pitches and configurations Matched Housing & Header system Straight, Right ngle or SMT Headers Sure fit, Fine Pitched & Polarized MTING ONNETORS: Each set has male and female mate SPEIFITIONS: Material: Insulator: PT, glass reinforced, rated UL94V-0 Nylon 66, rated UL94V-0 ontacts: rass Plating: Tin over copper underplate overall Electrical: Operating voltage: 100V max. urrent rating: mps max. Insulation resistance: 1000 MΩ min. Dielectric withstanding voltage: 800V for 1 minute Mechanical: Insertion force: 1.28 lbs max Withdrawal force: lbs min. Temperature Rating: Operating temperature: -55 to +125 SFETY GENY PPROVLS: UL Recognized File No. E S ertified File No. LR ORDERING INFORMTION RIMP ONTT 2T SERIES INDITOR 1T = 1.00mm ody Style "" ontact 125T = 1.25mm ody Style "" ontact 125T = 1.25mm ody Style "" ontact 125T = 1.25mm ody Style "" ontact 15T = 1.50mm ody Style "" ontact 15T = 1.50mm ody Style "" ontact 2T = 2.00mm ody Style "" ontact 2T = 2.00mm ody Style "" ontact 25T = 2.50mm ody Style "" ontact 25T = 2.50mm ody Style "" ontact R HI-TEMP INSULTOR V I L L E Pb RoHS OMPLINT 2002 / 95 / E PKGING R = 10,000 Piece Reel = 1,000 Piece Loose ut SERIES INDITOR 1H = 1.00mm 125H = 1.25mm 15H = 1.50mm 2H = 2.00mm 2H2 = 2.0mm Dual Row 25H = 2.50mm ORDERING INFORMTION SHROUDED HEDER 2SH 04 TS SERIES INDITOR 08SH = 0.80mm 1SH = 1.00mm 125SH = 1.25mm 15SH = 1.50mm 2SH = 2.0mm 25SH = 2.50mm ORDERING INFORMTION RIMP HOUSING 2H 04 ODY STYLE = ody Style "" = ody Style "" = ody Style "" ODY STYLE = ody Style "" = ody Style "" = ody Style "" TOTL NO. OF POSITIONS 02 thru 25 (ody style 1) 04 thru 50 (ody style 2) 02 thru 15(ody styles, & ) PIN NGLE ID = Pre-installed crimp contacts (08SH Type only) TS = Straight P TR = Right ngle P POSITIONS 02 thru 25 OPTIONS: dd designator(s) to end of part number SMT = Surface mount leads with Hi-Temp insolator Rahway venue Union, New Jersey T: F:
2 dam Technologies, Inc. HEDER & HOUSING SYSTEMS 0.8mm & 1.00mm 08H--XX-ID 0.8mm ID HOUSING WITH PRE-INSTLLED ONTTS.064 [1.65].053 [1.36] 08SH--XX-TS-SMT 0.8mm VERTIL SMT HEDER.057 [1.45] 08H--08-ID.066 [1.70] 08SH--08-TS-SMT.114 [2.90] = X No. of Positions -1 = X No. of Positions [1.45].064 [1.65] 1H--XX 1.00mm RIMP HOUSING.005 [0.15] = X No. of Positions -1 = X No. of Positions [1.20].023 [0.60].027 P Layout 1T-R 1.00mm TERMINL.110 [2.80] 1H--04 1T-R.082 [2.10].153 [3.90].061 [1.55].052 [1.34].005 [0.15].001 [0.05].009 [0.25] = X No. of Positions -1 = X No. of Positions [3.00].004 [0.12].014 [0.38] 1SH--XX-TS-SMT 1.00mm VERTIL SMT HEDER 1SH--XX-TR-SMT 1.00mm RIGHT NGLE SMT HEDER.167 [4.25] [2.90].114 [2.90] [1.00] = X No. of Positions -1 = X No. of Positions [1.20].027 1SH--04-TS-SMT P Layout.061 [1.55].104 [2.65].039 [1.00].114 [2.90].167 [4.25].167 [4.25].023 [0.60] [1.20] = X No. of Positions -1 = X No. of Positions SH--04-TR-SMT.078 P Layout [5.55] [4.00] 909 Rahway venue Union, New Jersey T: F:
![dam Technologies, Inc. HEDER & HOUSING SYSTEMS 1.25mm Type 125H--XX 1.25mm RIMP HOUSING 125T-R 1.25mm RIMP TERMINL.125 [3.20].153 [3.90].061 [1.55.](/docs-images/90/103883156/images/3-0.jpg "155 [3.95].090 [2.30].009 [0.25.052 [1.34 [0.79 125T-R.052 [1.34.030 [0.77] 125H--10 [0.80 -.055 [1.40 - = X No. of Positions -1 = X No.")
![of Positions +.068 [1.75] 125SH--XX-TS 1.25mm VERTIL HEDER 125SH--XX-TR 1.25mm RIGHT NGLE HEDER.127 [3.25].129 [3.30].187 [4.75.187 [4.75.045 [1.](/docs-images/90/103883156/images/3-1.jpg "15] 125SH--04-TS [1.25.086 [2.20] 125SH--04-TR ø [1.25 ø [1.25 = X No. of Positions -1 = X No. of Positions +.068 [1.75] = X No.")
![of Positions -1 = X No. of Positions +.068 [1.75] 125SH--XX-TS-SMT 1.25mm VERTIL SMT HEDER [1.25.011 [0.30 125SH--XX-TR-SMT 1.](/docs-images/90/103883156/images/3-2.jpg "25mm RIGHT NGLE SMT HEDER.163 [4.15].133 125SH--04-TS-SMT.163 [4.15.133 125SH--04-TR-SMT.011 [0.30].141 [3.60].023 [0.60] X.063 [0.80 X 1.")
![60] P Layout = X No. of Positions -1 = X No. of Positions +.068 [1.75] = X No. of Positions +.202 [5.15].082X.118 [2.10X3.00].141 [3.60.023 [0.60 [1.](/docs-images/90/103883156/images/3-3.jpg "25 X.063 [0.80 X 1.60].082X.118 [2.10X3.00] P Layout = X No. of Positions -1 = X No. of Positions +.068 [1.75] = X No. of Positions +.202 [5.")
3 dam Technologies, Inc. HEDER & HOUSING SYSTEMS 1.25mm Type 125H--XX 1.25mm RIMP HOUSING 125T-R 1.25mm RIMP TERMINL.125 [3.20].153 [3.90].061 [ [3.95].090 [2.30].009 [ [1.34 [ T-R.052 [ [0.77] 125H--10 [ [ = X No. of Positions -1 = X No. of Positions [1.75] 125SH--XX-TS 1.25mm VERTIL HEDER 125SH--XX-TR 1.25mm RIGHT NGLE HEDER.127 [3.25].129 [3.30].187 [ [ [1.15] 125SH--04-TS [ [2.20] 125SH--04-TR ø [1.25 ø [1.25 = X No. of Positions -1 = X No. of Positions [1.75] = X No. of Positions -1 = X No. of Positions [1.75] 125SH--XX-TS-SMT 1.25mm VERTIL SMT HEDER [ [ SH--XX-TR-SMT 1.25mm RIGHT NGLE SMT HEDER.163 [4.15] SH--04-TS-SMT.163 [ SH--04-TR-SMT.011 [0.30].141 [3.60].023 [0.60] X.063 [0.80 X 1.60] P Layout = X No. of Positions -1 = X No. of Positions [1.75] = X No. of Positions [5.15].082X.118 [2.10X3.00].141 [ [0.60 [1.25 X.063 [0.80 X 1.60].082X.118 [2.10X3.00] P Layout = X No. of Positions -1 = X No. of Positions [1.75] = X No. of Positions [5.15] Rahway venue Union, New Jersey T: F:
4 dam Technologies, Inc. HEDER & HOUSING SYSTEMS 1.25mm Type 125H--XX 1.25mm RIMP HOUSING 125T-R 1.25mm RIMP TERMINL 125T-R 125H [1.35].041 [1.05].155 [3.95] [1.60] [3.20].129 [3.30] = X No. of Positions -1 = X No. of Positions [0.45] = X No. of Positions [1.75].035 [0.90].053 [1.35] 125SH--XX-TS 1.25mm VERTIL HEDER 125SH--XX-TS-SMT 1.25mm VERTIL SMT HEDER.125 [3.20] 125SH--04-TS.011 [0.30].165 [4.20] 125SH--04-TS-SMT.145 [3.70].165 [4.20].183 [4.65].011 [0.30].086 [2.20] = X No. of Positions -1 = X No. of Positions [1.75] ø P Layout = X No. of Positions -1 = X No. of Positions [1.75] = X No. of Positions [5.15].141 [3.60] X.062 [0.80 X 1.60].023 [0.60] P Layout.009 [0.25] P Layout 125SH--XX-TR-SMT 1.25mm RIGHT NGLE SMT HEDER.061 [1.55] 125SH--04-TR-SMT.141 [3.60].062 [1.60].011 [0.30].057 [1.45].118 [3.00].023 [0.60].165 [4.20].102 [2.60].082 [2.10].125 [3.20].133 = X No. of Positions -1 = X No. of Positions [1.75] = X No. of Positions [4.75] 909 Rahway venue Union, New Jersey T: F:
5 dam Technologies, Inc. HEDER & HOUSING SYSTEMS 1.25mm Type.157 [4.00] 125H--XX 1.25mm RIMP HOUSING 125H [2.30].145 [3.70].129 [3.30].062 [1.60] - 125T-R 1.25mm RIMP TERMINL.066 [1.70] [1.30].047 [1.20].125 [3.20] = X No. of Positions -1 = X No. of Positions [1.65].039[1.00] 125T-R 125SH--XX-TS 1.25mm VERTIL HEDER 125SH--XX-TR 1.25mm RIGHT NGLE HEDER.169 [4.30] SH--05-TS.212 [5.40].177 [4.50].141 [3.60] 125SH--05-TR ø ø = X No. of Positions -1 = X No. of Positions + P Layout = X No. of Positions -1 = X No. of Positions + P Layout SH--XX-TS-SMT 1.25mm VERTIL SMT HEDER 125SH--XX-TR-SMT 1.25mm RIGHT NGLE SMT HEDER 125SH--06-TS-SMT 125SH--08-TR-SMT ø.035 [0.90].039 [3.60].074 [1.90].188 [4.80].122 [3.10].196 ø.027x.070 [0.70x1.80] = X No. of Positions -1 = X No. of Positions [1.65] = X No. of Positions [3.15].041 [1.05] P Layout.051[1.30] = X No. of Positions -1 = X No. of Positions [1.65] = X No. of Positions [3.15].027x.070 [0.70x1.80].041[1.05] P Layout Rahway venue Union, New Jersey T: F:
![dam Technologies, Inc. HEDER & HOUSING SYSTEMS 1.5mm Type.177 [4.50] 15H--XX.133 1.5mm RIMP HOUSING 15T-R.066 [1.70] 15T-R 1.5mm RIMP TERMINL.047 [1.20].104 [2.65].033 [0.84] -.062 [1.60] -.047 [1.20] = X No.](/docs-images/90/103883156/images/6-1.jpg "of Positions -1 = X No. of Positions + 15H--10.157 [4.00].057 [1.45].040 [1.04].137 [3.50] 15SH--XX-TS 1.5mm VERTIL HEDER.103 [2.70] 15SH--XX-TR 1.5mm RIGHT NGLE HEDER.106 [2.70].177 [4.50] ø.")
6 dam Technologies, Inc. HEDER & HOUSING SYSTEMS 1.5mm Type.177 [4.50] 15H--XX mm RIMP HOUSING 15T-R.066 [1.70] 15T-R 1.5mm RIMP TERMINL.047 [1.20].104 [2.65].033 [0.84] [1.60] [1.20] = X No. of Positions -1 = X No. of Positions + 15H [4.00].057 [1.45].040 [1.04].137 [3.50] 15SH--XX-TS 1.5mm VERTIL HEDER.103 [2.70] 15SH--XX-TR 1.5mm RIGHT NGLE HEDER.106 [2.70].177 [4.50] ø SH--04-TS.145 [3.70].181 [4.60] 15SH--04-TR ø.027 = X NO. of Positions -1 = X NO. OF SPES + P Layout = X NO. of Positions -1 = X NO. OF SPES + P Layout.145 [3.70] SH--XX-TS-SMT 1.5mm VERTIL SMT HEDER 15SH--XX-TR-SMT 1.5mm RIGHT NGLE SMT HEDER = X No. of Positions -1 = X No. of Positions [3.00].055 [1.40].137 [3.50] 15SH--04-TS-SMT.027 P Layout.145 [3.70] = X No. of Positions -1 = X No. of Positions [3.00].137 [3.50].055 [1.40] 15SH--04-TR-SMT.027 P Layout 909 Rahway venue Union, New Jersey T: F:
7 dam Technologies, Inc. HEDER & HOUSING SYSTEMS 1.5mm Type & 2mm Type 15H--XX 1.5mm RIMP HOUSING 15T-R 1.5mm RIMP TERMINL.106 [2.70] 15H [5.30].033 [0.85] 15T-R.224 [5.70] = X No. of Positions -1 = X No. of Positions [1.10].131 [3.35] [1.07].295 [7.50].082 [2.10].082 [2.10] [1.40] - [1.30] 15SH--XX-TS-SMT 1.5mm VERTIL SMT HEDER 15SH--XX-TR-SMT 1.5mm RIGHT NGLE SMT HEDER [5.75] 15SH--04-TS-SMT.175 [4.45] = X No. of Positions-1 = X No. of Positions [1.30].033 [0.85].275 [7.00] P Layout [5.75] 15SH--04-TR-SMT.175 [4.45] = X No. of Positions -1 = X No. of Positions [1.30].139 [3.55].275 [7.00].033 [0.85] P Layout 2H--XX 2mm RIMP HOUSING 2T 2mm RIMP TERMINL.232 [5.90].177 [4.50] 2H [5.10].067 [1.70].040 [1.02].084 [2.13].091 [2.30] 2T-R.077 [1.95] Positions: 2 thru 15 = x No. of Positions -1 = x No. of Positions [1.60].138 [3.50].057 [1.45].061 [ SH--XX-TS 2mm VERTIL HEDER 2SH--XX-TR 2mm RIGHT NGLE HEDER 2SH--10-TS.134 2SH--10-TR [4.70].240 [6.10] ø.303 [7.70].240 [6.10] [6.25] ø.020 P Layout = x No. of Positions -1 = x No. of Positions = x No. of Positions -1 = x No. of Positions P Layout Rahway venue Union, New Jersey T: F:
8 dam Technologies, Inc. HEDER & HOUSING SYSTEMS 2mm Type 2H--XX 2mm RIMP HOUSING 2T-R 2mm RIMP TERMINL [2.20].063 [1.60] 2H [2.80].067 [1.70] [6.35].270 [6.86].230 [5.85].037 [0.95] = x No. of Positions -1 = x No. of Positions [1.80].177 [4.50].051 [1.30].082 [2.08] 2T-R 2SH--XX-TS 2mm VERTIL HEDER 2SH--XX-TR 2mm RIGHT NGLE HEDER.073 [1.85].130 [3.30].185 [4.70] 2SH--10-TS.067 [1.70] 2SH--10-TR.240 [6.10] [7.70].242 [6.14].246 [6.25] = x No. of Positions -1 = x No. of Positions [2.10] ø P Layout = x No. of Positions -1 = x No. of Positions [2.10] ø P Layout.197 2SH--XX-TS-SMT 2mm VERTIL SMT HEDER 2SH--XX-TR-SMT 2mm RIGHT NGLE SMT HEDER 2SH--10-TS-SMT 2SH--10-TR-SMT.260 [6.60].295 [7.50].063 [1.60].039 [1.00].217 [5.50].102 [2.60].220 [5.60].063[1.60].086 [2.20] Positions: 2 thru 16 = x No. of Positions -1 = x No. of Positions [3.90].063x.118 [1.60x3.00] P Layout.039x.217 [1.00x5.50] Positions: 2 thru 16 = x No. of Positions -1 = x No. of Positions [3.90] x.134 [1.50x3.40] P Layout.039x.137 [1.00x3.40] 909 Rahway venue Union, New Jersey T: F:
![dam Technologies, Inc. HEDER & HOUSING SYSTEMS 2.5mm Type &.303 [7.70] 25H--XX 2.5mm RIMP HOUSING.267 [6.80].041 [1.05] 25T-R 2.5mm RIMP TERMINL.220 [5.6] = x No. of Positions -1 = x No.](/docs-images/90/103883156/images/9-0.jpg "of Positions +.189 [4.80].161 [4.10] 25H--03.074 [1.90].025 [0.65].055 [1.40] [2.02].068 [1.75].061 [1.55] - 25T-R.112 [2.85].126 [3.20] -.025 [0.64].226 [5.75].133.226 [5.75] = x No.")
![of Positions -1 = x No. of Positions +.102 [2.60].275 [7.0] 25SH--XX-TS 2.5mm VERTIL HEDER 25SH--03-TS ø.035 [0.90] P Layout.025 [0.64].453 [11.50].139.224 [5.70] = x No. of Positions -1 = x No.](/docs-images/90/103883156/images/9-1.jpg "of Positions +.102 [2.60] 25SH--XX-TR 2.5mm RIGHT NGLE HEDER 25SH--03-TR ø.035 [0.90] P Layout 25H--XX 2.5mm RIMP HOUSING.077 [1.95] 25T-R 2.5mm RIMP TERMINL -.280 [7.10].255 [6.50].150 [3.")
9 dam Technologies, Inc. HEDER & HOUSING SYSTEMS 2.5mm Type &.303 [7.70] 25H--XX 2.5mm RIMP HOUSING.267 [6.80].041 [1.05] 25T-R 2.5mm RIMP TERMINL.220 [5.6] = x No. of Positions -1 = x No. of Positions [4.80].161 [4.10] 25H [1.90].025 [0.65].055 [1.40] [2.02].068 [1.75].061 [1.55] - 25T-R.112 [2.85].126 [3.20] [0.64].226 [5.75] [5.75] = x No. of Positions -1 = x No. of Positions [2.60].275 [7.0] 25SH--XX-TS 2.5mm VERTIL HEDER 25SH--03-TS ø.035 [0.90] P Layout.025 [0.64].453 [11.50] [5.70] = x No. of Positions -1 = x No. of Positions [2.60] 25SH--XX-TR 2.5mm RIGHT NGLE HEDER 25SH--03-TR ø.035 [0.90] P Layout 25H--XX 2.5mm RIMP HOUSING.077 [1.95] 25T-R 2.5mm RIMP TERMINL [7.10].255 [6.50].150 [3.80] 25H [5.10].067 [1.70] 25T-R.040 [1.02].091 [2.30] = x No. of Positions -1 = x No. of Positions [1.45].061 [ [2.13] [2.60].150 [3.80] 25SH--XX-TS 2.5mm VERTIL HEDER.125 [3.20] 25SH--XX-TR 2.5mm RIGHT NGLE HEDER.025 [0.64].039 [3.20] Positions: 2 thru 15 = x No. of Positions -1 = x No. of Positions SH--04-TS ø P Layout.165 [4.20] Positions: 2 thru 15 = x No. of Positions -1 = x No. of Positions [6.70] 25SH--04-TR ø P Layout Rahway venue Union, New Jersey T: F:
![dam Technologies, Inc. HEDER & HOUSING SYSTEMS.100" [2.54] ENTERLINE SINGLE & DUL ROW MTE & MTF SERIES MTE MTE SINGLE ROW SINGLE ROW.](/docs-images/90/103883156/images/10-0.jpg "100 [2.54].100 [2.54].100 [2.54] MTF DUL ROW.200 [5.08].100 [2.54].100 [2.54].555 [14.10].555 [14.10] =.100 [2.54] X No. of SPES =.100 [2.54] X No. of SPES +.")
![200 [5.08] MTE-08 MTF-14 MTF DUL ROW MTE- RIMP ONTT.070 [1.78].100 [2.54].472 [12.00].100 [2.54] Section -.090 [2.30] MTE--R.180 [4.60].](/docs-images/90/103883156/images/10-1.jpg "070 [1.")
![80] Section - MTE- RIMP ONTT ORDERING INFORMTION HOUSING RIMP ONTT MTE 10 MTE- R SERIES INDITOR MTE = Single row housing MTF = Dual row](/docs-images/90/103883156/images/10-2.jpg "housing POSITIONS Single row (MTE) 02-40 Positions Dual Row (MTF) 04-80 Positions SERIES INDITOR MTE- = rimp contact PKGING = 1,000 piece")
10 dam Technologies, Inc. HEDER & HOUSING SYSTEMS.100" [2.54] ENTERLINE SINGLE & DUL ROW MTE & MTF SERIES MTE MTE SINGLE ROW SINGLE ROW.100 [2.54].100 [2.54].100 [2.54] MTF DUL ROW.200 [5.08].100 [2.54].100 [2.54].555 [14.10].555 [14.10] =.100 [2.54] X No. of SPES =.100 [2.54] X No. of SPES [5.08] MTE-08 MTF-14 MTF DUL ROW MTE- RIMP ONTT.070 [1.78].100 [2.54].472 [12.00].100 [2.54] Section [2.30] MTE--R.180 [4.60].070 [1.80] Section - MTE- RIMP ONTT ORDERING INFORMTION HOUSING RIMP ONTT MTE 10 MTE- R SERIES INDITOR MTE = Single row housing MTF = Dual row housing POSITIONS Single row (MTE) Positions Dual Row (MTF) Positions SERIES INDITOR MTE- = rimp contact PKGING = 1,000 piece loose cut R = 6,000 pieces on reel 909 Rahway venue Union, New Jersey T: F:
0.80mm SUB-MICRO HEADERS 1.00mm MICRO HEADERS
dam Technologies, Inc. 0.80mm SU-MIRO HRS 1.00mm MIRO HRS.031" [0.80] & " NTRLIN MPH & SPH / MRS & SRS INTROUTION: dam Tech 0.8mm and 1.00mm and Female Header series is a fine pitch, low profile, dual
lif flex CirCUit ConneCtor 2.54mm [.100"] CeNTerliNe 1.25mm [.049"] CeNTerliNe 1.00mm [.
![lif flex CirCUit ConneCtor 2.54mm [.100] CeNTerliNe 1.25mm [.049] CeNTerliNe 1.00mm [.](/thumbs/80/80818919.jpg "lif flex CirCUit ConneCtor 2.54mm [.100] CeNTerliNe 1.25mm [.049] CeNTerliNe 1.00mm [.")
dam Technologies, Inc. INTRODUTION: dam Tech P Dual Series Port D-Sub Flexible onnectors Printed ircuit provide (FP) the and means Flexible to increase Flat able I/O (FF) without connectors utilizing are
.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
![.100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES](/thumbs/90/102427427.jpg ".100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES")
dam Technologies, Inc. INTRODUCTION: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements.
TERMINAL BLOCKS BULkhEAD & PC BOARD mount TB & TD SERIES
dam Technologies, Inc. TERMINL LOCKS ULkhED & PC ORD mount T & TD SERIES INTRODUCTION: dam Tech T & TD series Terminal locks are a full range of locks which are most commonly used to terminate wires and
.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
![.100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES](/thumbs/86/94150234.jpg ".100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES")
Introduction: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements. vailable in Single,
TERMINAL BLOCKS BULKHEAD & PC BOARD MOUNT TB & TD SERIES
TERMINL LOCKS ULKHED & PC ORD MOUNT T & TD SERIES INTRODUCTION: dam Tech T & TD series Terminal locks are a full range of locks which are most commonly used to terminate wires and eliminate splicing. They
TERMINAL BLOCKS BULKHEAD & PC BOARD MOUNT TB & TD SERIES
TERMINL LOCKS ULKHED & PC ORD MOUNT T & TD SERIES INTRODUCTION: dam Tech T & TD series Terminal locks are a full range of locks which are most commonly used to terminate wires and eliminate splicing. They
.062 [1.57] Commercial Pin and Socket Connectors
![.062 [1.57] Commercial Pin and Socket Connectors](/thumbs/85/92583829.jpg ".062 [1.57] Commercial Pin and Socket Connectors")
.062 [1.57] ommercial Product Facts Polarized avity identification Low contact-mating force Dual locking lances Detent and positive locking ontacts available in brass and phosphor bronze with tin and gold
M22 Connectors Specification
Specification 2mm pitch, with 0.5mm square male pin connection system. oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Jumper socket: Male: Finish: Electrical
M20 Connectors Specification
Specification mm pitch, with 0.64mm square male pin connection system. mm (.100") PITCH oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Male: Finish: Electrical
Gecko Connectors Introduction
Gecko onnectors Introduction Gecko is a mm pitch High-Reliability connector range from Harwin. Improving on the popular 2mm pitch Datamate series, and harnessing the modern technology of micro-machining,
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPEIFIATIONS Features and Benefits Board-mounting pegs provide
COMPONENT SPECIFICATION M20 SERIES CONNECTORS AUGUST 2016 CONTENTS: SECTION TITLE PAGE. 1 Description of Connector and Intended Application 2
AUGUST 2016 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Gauges 5 APPENDICES NOTES: 1. Third angle projection
Connector MACHINE PIN SOCKET EMS SERIES FEATURES SPECIFICATIONS KINDS OF BASE
MACHINE PIN SOCKET EMS SERIES Connector FEATURES Funnel shaped four-fingered and six-fingered contacts provide easy IC insertion and withdrawal, high reliability Gold plated contact to ensure low contact
PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS
BOARD/WIRE-TO-BOARD CONNECTORS PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS Minitek Headers for Pin-in-Paste Processes OVERVIEW Minitek is FCI s brand for board-to-board and wire/cableto-board connectors
WIRE-PRESS SOCKETS (AXW)
FOR PC BORD TO WIRE XW WIRE-PRESS SOCKETS (XW) FETURES 1. Pressure welding method for superior wiring and no need to strip wires. pplicable wires: WG #22, #24, #26, #28. 2. Two pressure weldings assure
1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
1.7mm pitch, Low Profile Wire-to-oard onnectors for Power Supplies DF Series (UL, -UL, Listed) Lock structure and operation Socket Latch Header Latches are deflected slightly during mating. Features 1.
3M TM PIN STRIP HEADER, 951 SERIES 2MM AND 2MM X 2MM STRAIGHT, RIGHT ANGLE AND SURFACE MOUNT, SOLDER TAIL
M TM PIN STRIP HEER, 9 SERIES MM N MM X MM STRIGHT, RIGHT NGLE N SURFE MOUNT, SOLER TIL. REGULTORY INFORMTION: VISIT M.com/regs OR ONTT YOUR M REPRESENTTIVE TO FIN THE RoHS OMPLINE STTUS THE M PRT YOU
2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves the low profile.. Insulation Displacement Area Protected by
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. D 3.00 to 7.92mm (.118 to.312") Pitch FEATURES AND SPECIFICATIONS Features
2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection
.5mm Pitch Connectors for Full Lock and Discrete Wire Connection DF1E Series UL, C-UL Listed Full lock function added Inner-lock system full lock mechanism Features 1. Full Lock Function dded The inner
2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Jul.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves
both pin and sleeve contacts.
The different modules are inserted into the appropriate retaining frames (which vary according to the different housing sizes). There they snap in easily and safely. A special removal tool ensures quick
Stac64 Unsealed Connector System
Unsealed Connector System 2.54mm (.100") Pitch 34729 Female 22.70 x 22.23 Features and Benefits Pre-assembled TPA to receptacle housing shipped as single assembly provide applied labor and cost savings
.093 [2.36] Commercial Pin and Socket Connectors
![.093 [2.36] Commercial Pin and Socket Connectors](/thumbs/90/101430850.jpg ".093 [2.36] Commercial Pin and Socket Connectors")
.09 [.] Commercial Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold
PRODUCT SPECIFICATION
MINI-FIT SR. SERIES 1.0 SCOPE This specification covers the 10.00 mm / (.394 in.) centerline tin and gold, silver plated connector series, single and dual row versions in wire to wire and wire to printed
Power Board to Board Connector
Power oard to oard onnector PD Series OUTLINE PD series is a board to board connector for high current power supply units which combines power and signal contacts. FETURE ontact is highly reliable connection
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 0XX. Wire Gauge Size. Code Accepted Wire Cap Code Wire Gauge Insulation Pages 6-7
The 917X series of surface mount Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from
Datamate Connectors Female Vertical PC Tail
Female Vertical PC Polarised mouldings. For ritish Standard versions see pages 14 to 15. Dummy contacts for additional polarisation use order code M80-023. Mates with male connectors on pages 21 to 25.
INSULATION DISPLACEMENT IDC. PITCH d : 1.27X1.27mm, b : 2.00X2.00mm, a : 2.54X2.54mm IDCR IDC RIBBON CONNECTOR IDB IDC D-SUB CONNECTOR
INSULATION DISPLACEMENT PITCH d : 1.271.27mm, b : 2.0.00mm, a : 2.542.54mm R RIBBON CONNECTOR IDB D-SUB CONNECTOR CABLE ASSEMBLY TABLE OF CONTENTS PAGE d001 1 b001 2 a01 3 a0 4 a003 5 a1 6 R001 7 IDB100
Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors
Section : Right ngle Printed ircuit oard Receptacles With Pin ontacts, Right ngle Termination, 0-04P Lightweight, rugged right angle headers feature gold-plated contacts for thru-hole printed circuit board
PRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
AVX Wire-to-Board Connectors
AVX Wire-to-Board Connectors www.avx.com Version 11.11 Table of Contents INSULATION DISPLACEMENT CONNECTORS (IDC) WIRE TO BOARD (WTB) DISCRETE WIRE IDC SERIES 9175...................................................................................
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 5XX. Wire Gauge Size
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) DF Series Features 1. Correspond to oard Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header (1) Low
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Gauge Size
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
sealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cableto-board and cable-to-cable applications with protection up to IP65 / IP67. At the same time, applications up to 2.5
2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR R PC board layout (viewed from component side) and Assembly layout
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Secure locking device Solder crack preventive material Low insertion force Insertion guide mechanism Applicable to automatic board
XA CONNECTOR. 1Certified LR R
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Specifications Current rating: 3 A AC DC (AWG #22, #20) Voltage rating: 250 V AC DC Temperature range: -25 C to +85 C (including
D Subminiature Combo D
Cable ( 8) Loose Contacts Coaxial 75 Ohm Stamped Crimp/Crimp Recommended Wire Trim Dimensions Kit (ody, Ferrule, Center Contact) Stamped Crimp/Crimp Kit Kit 30 in. Kit 50 in. RG Cable Number D130322-2
2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
RR-HR. Simplify your cable assemblies REAR RELEASE CRIMP CONNECTORS RR-HR / E11. D-Sub connectors - Stamped and Formed Contacts.
RR-HR D-Sub connectors - Stamped and Formed Contacts REAR RELEASE CRIMP CONNECTORS CHARACTERISTICS Specifications Connectors according to MIL C24308 Materials and Platings Shells Tinned steel with or without
5mm Pitch Miniature Potting Connectors for Secondary Power Supply
5mm Pitch Miniature Potting Connectors for Secondary Power Supply DF5 Series Single row type Features 1. Potting Product This connector is capable of potting 9mm maximum, and 22.5mm mounting height is
2mm Pitch 2 Piece Battery Connector. Horizontal/Vertical
FEATURES Low profile battery connectors (GF21/GF22/GF31 only) with 2.6mm (.12") height. 2 piece type with a highly reliable connection Sequence connection (FMLB : First Mate Last Break, 1 pin only) is
2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
Discrete Wire IDC Contact & Cap
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
DIN C-FORM & R-FORM PLUG, DIN SERIES VERTICAL, RIGHT ANGLE, SOLDER TAIL OR PRESS-FIT TERMINATION,.100" BACKPLANE REAR PLUG 3M TM
M TM IN -FORM & R-FORM PLUG, IN SERIES VERTIL, RIGHT NGLE, SOLER TIL TERMINTION, " KPLNE RER PLUG. TES REGULTORY INFORMTION: VISIT M.com/regs OR ONTT YOUR M REPRESENTTIVE TO FIN THE RoHS OMPLINE STTUS
Remote Input/Output Terminal System (RITS) Connectors
Product Facts Termination by generic tools Small.0 mm [.079] centerline connectors Two contact points structure provides for high contact reliability Housing colors indicate applicable wire range omponent
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. EPower Connectors 4.20mm (.165") Pitch Mini-Fit Plus Terminal 46083 Crimp,
SSL - Discrete Wire IDC Contact & Cap
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
PC BOARD MOUNTING CONNECTORS
PC BOARD MOUNTING CONNECTORS 720 SERIES (CRIMP TYPE CONNECTORS) FEATURES The 720 series connectors (crimp connector) are designed for a wide range of uses, and come in many shapes, two contact arrangements
TY3085/6 SERIES. 3.00mm Pitch Wire To Wire Connector. Specification. Circuits. Kingmate
3.00mm Pitch Wire To Wire Connector Assembly Layout Right Angle Type DIP-Type Specification Circuits Pitch Current Rating Voltage Rating Contact Resistance Withstand Voltage Insulation Resistance Temperature
FOR BOARD-TO-CABLE CONNECTION
FOR OR-TO-LE ONNETION 240 SERIES (GENERL-PURPOSE TYPE) FETURES 1.27 mm (0.050 in.) pitch contact arrangement in two rows enables high-density mounting. onnectors with to 96 contacts are available for various
2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
2mm Double-Row Connector (Product Compliant to UL/CSA Standard) DF11 Series Features 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
Poke-Home: Horizontal AWG: WTB INTER CONNECT APPLICATIONS FEATURES AND BENEFITS ELECTRICAL MECHANICAL ENVIRONMENTAL HOW TO ORDER 00X
The new 9276 series connector provides a quick and reliable wire-toboard termination in a sleek 2.5mm pitch SMT package for a broad range of industrial and commercial markets. With almost every product
Spring Loaded Contacts
Spring Loaded Contacts Contents ATE Spring Probes Specifications One Part Probes Two Part Probes Spring Loaded Contacts Specifications Spring Loaded Contact Connectors Single Spring Loaded Contacts SMT
By using this Adapter a connection between Socket and Emulator or programming device can be easily achieved.
Series Introduction QFP-Production Use Socket and Emulation-Adapter YAMAICHI's IC149-Series is available in many different formats, from 44 pins to 240 pins. It is designed to fit most of the common semiconductors
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Size
Wire-to-Wire connectors have been used in the industrial market for years with traditional 2-Piece (plug and socket) connector systems which require crimp and poke wire terminations to connect electrical
RECTANGULAR CONNECTORS
RETANGULAR ONNETORS FN-360 SERIES FEATURES Many applications Various connectors are available for connection by means of soldering, wire wrapping, crimping, P board mounting, and insulation displacement
PC BOARD CONNECTORS 720M SERIES (CRIMP TYPE CONNECTORS)
PC BOARD CONNECTORS 720M SERIES (CRIMP TYPE CONNECTORS) FEATURES The 720 series connectors (crimp type connectors) are designed for a wide range of uses. 1-row and 2-row types are available to allow various
YL CONNECTOR. 1Certified LR R Specifications. Standards. 4.5mm pitch/disconnectable Crimp style Wire-to-wire connectors
.mm pitch/disconnectable Crimp style Wire-to-wire connectors Panel lock Inner lock lance Specifications Current rating: 0A AC, DC max. (A when retainers are mounted) Voltage rating: 00V AC, DC max. Temperature
VersaBlade Wire-to-Wire Connection System
VersaBlade Wire-to-Wire Connection System VersaBlade Wire-to-Wire Connection System For Home Appliance Contents 0 Product Overview 05 Feature and Benefits 0 Specifications 07 Mating Structure Ordering
10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cable-to-board and cable-to-cable applications with protection up to IP 65 / IP 67. At the same time, applications up to
Standard I/O, 15 Position
The 9157 series was specifically designed for portable equipment. AVX now offers this two-part system as a standard product. The fixed SMT socket is designed to be housed within the confined dimensional
2.54mm Pitch Bottom Entry Type Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Standard AWG: WTB
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
JFA CONNECTOR J300 SERIES
.8mm (.0") pitch rimp.08mm (.") pitch JF ONNETOR J00 SERIES Disconnectable rimp style connectors(wiretoboard/wiretowire) Features Doublespring construction For superior contact reliability, the receptacle
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features Correspond to Board Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header In-line
RWZ CONNECTOR. 1Certified LR Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
Disconnectable Crimp style Wire-to-wire connectors In unit connection, this RWZ connector is a hybrid type double row drawer connector with combined signal and power supply circuits, absorbs misalignment
Poke-Home Thru-Wire: WTW
Wire-to-Wire connectors have been used in the industrial market for years with traditional 2-Piece (plug and socket) connector systems which require crimp and poke wire terminations to connect electrical
Amphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications
Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility
CLASS H/K5 AND R SERIES FUSEBLOCKS
LASS H/K5 AND R SERIES FUSEBLOKS lip designs maximize electrical contact and minimize heat rise Standard reinforcing clips on all lass R fuseblocks and lass H fuseblocks rated 00 A and higher RoHS compliant,
Specifications. Class R Blocks 250 V FLNR/FLNR_ID KLNR LLNRK TLN. Torque N-m (120 in-lbs) 2/0-6 AWG
LF Series lass H/K5 AND R Fuse Blocks Specifications Voltage : 250 V, 600 V Ampere s: 0 600 A Leakage urrent:
Electrical dielectric withstanding voltage. sea level Vrms Vrms m Vrms Vrms
Applications Mechanical and electrical interface between on-board civil avionics equipments and racks Standards Arinc 600 Characteristics Mechanical material finish aluminum alodine 00 shells alloy to
MIL-DTL Series III Type Connectors
-90 Memory Stick How To Order Sample Part Number -90 NF -5 N H P Series / Basic Part No. -90 NF = Aluminum/admium Olive Drab ME = Aluminum/Electroless Nickel MT = Aluminum/Nickel PTFE ZR = Aluminum/Zinc-Nickel
Thick Film Resistor Networks Single-In-Line, Molded SIP; 01, 03, 05 Schematics 6, 8, 9 or 10 Pin A Profile and 6, 8 or 10 Pin C Profile
Thick Film Resistor Networks Single-In-Line, Molded SIP; 01, 03, 05 Schematics 6, 8, 9 or 10 Pin Profile and 6, 8 or 10 Pin Profile STNDRD ELETRIL SPEIFITIONS GLOBL MODEL/ SHEMTI xxx01 xxx03 PROFILE RESISTOR
PRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
PRODUCT SPECIFICATION
2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies
NEW 1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies DF65 Series (UL Pending) Lock structure and operation Socket Header Latch Latches are deflected slightly during mating. Features
CALL (512 ) x6400
The AirBorn stackable compliant connector family is one of AirBorn s solutions for high-density, board-to-board stacking applications. This connector family is available in 0.075 contact spacing and 100
MAIN FEATURES TECHNICAL DATA MATERIALS MECHANICAL ELECTRICAL. Glass filled polyester rated UL94 V-O Copper alloy plated hard acid gold
GENERAL INFORMATION MAIN FEATURES 2,54mm (0,1 ) pitch Fixed or replaceable contacts. Cantilever or bifurcated contacts. Cut to any size from 5 to 85 contacts single or 10 to 170 double sided. Suitable
JULY 2014 SECTION TITLE PAGE. 1 Description of Connectors and Intended Applications 2. 2 Marking of Connector and/or Package 2.
M80 & M83 SERIES RECTANGULAR CONNECTORS JULY 204 SECTION TITLE PAGE Description of Connectors and Intended Applications 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix Contact Orientations
1.25mm Pitch Miniature Crimping Connector (UL Listed)
1.25mm Pitch Miniature Crimping Connector (UL Listed) DF13 Series Type Mounting Type Mounting Height(h) Features 1. Miniature Size Designed in the low profile at mounting height 5.8mm. (SMT mounting straight
1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
Features 1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies DF65 Series 1. Enhanced contact reliability and lock structure The unique locking structure reinforces the engagement between
Varicon. Contents. The Varicon Range Introduction to Varicon Tools Page 26. Series 7008 Page 6. Series 7022 Page 8. Series 8020 Page 27
AVX Varicon Contents The Varicon Range............................................................ 2 Introduction to Varicon........................................................ 3 Series 7008 Page 6
CLICK HERE TO GO BACK TO PART NUMBER OVERVIEW. QFP/TQFP - 64 Pins (10x10) 0.5mm pitch. Detail C. Detail B
QFP/TQFP - 64 Pins (10x10) 0.5mm pitch Withstanding Voltage: 100V eff Solvent Durability: Freon Part Number (Details) IC149-064 - *69 - B5 B5 = Au over Ni Not available Detail C 10mm x 10mm N1 Detail B
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features 1. Correspond to Board Design in Wide Variation Crimp Socket Receptacle Pin Header (1) Low profile
EP METAL TYPE - SOLDER ISO ASSEMBLY OF EP MALE ISO ASSEMBLY OF EP FEMALE
EP METAL TYPE - SOLDER The EP Series has set the standard in high performance speaker connectors. Apart from its durability and strength, it offers consistent superior power handling capabilities. Features:
Varicon. Contents. The Varicon Range Introduction to Varicon Tools Page 26. Series 7008 Page 6. Series 7022 Page 8. Series 8020 Page 27
AVX Varicon Contents The Varicon Range............................................................ 2 Introduction to Varicon........................................................ 3 Series 7008 Page 6
Hi Density Card Connector SPECIFICATIONS: STANDARD MATERIALS AND FINISHES
Hi Density ard onnector SPEIFITIONS: The micro-miniature card connector series 106 is designed for a space conscious industry. The hi-density card configuration connector provides an extremely dense and
D-Sub Connectors XM3. D-Sub Connectors That Are Ideal for Office Equipment Interfaces. Space-saving 9-pin Slim D-sub Socket Connectors for Boards
XM3 XM3 Series That re Ideal for Office quipment Interfaces Shielded against MI. ompact, robust connectors with metal shells. nchors and rounding ixtures are available. RoHS ompliant Slim Models Join the
MIL-STD 1553 Interface Transformers - DBIT x 3 S
Electrical Data ( C ) - : - - : - MIL-STD Interface Transformers - DBIT x S () (-) () (-) (mh) min at khz-v DBIT S : : 0.0. Lp (-) DBIT S. :. :. Lp (-) DBIT S. :. :. Lp (-) DBIT S. :. :. Lp (-) DBIT S
JFA CONNECTOR J1000 SERIES
JFA CONNECTOR J1000 SERIES 2.2mm pitcth/disconnectable Crimp style connectors(wire-to-board/wire-to-wire) Specifications Current rating: Circuits 22 2 0 #1.4 5.5 5.5 4.7 4.0.9.. # 5.4 4. 4..9.4..0.0 Wire
Operating Temperature: -40ºC to +125ºC 6XX. Wire Gauge Size
AVX developed the initial SMT discrete wire IDC connector 5 years ago for 26-28AWG AVX wires. Since then, we have seen this Wire-to-Board (WTB) contact technology spread to multiple wire gauges and multiple
22 22, 24, , 18, AWG. 50 ohm 50 ohm. 75 ohm 75 ohm. 95 ohm 95 ohm
ircular onnectors MR 4 Series onnectors General Information high density (.080 [2.0] contact centers), lightweight, subminiature, cylindrical connector series featuring crimp contacts and fingertip, push-pull,
3M Wiremount Socket Series CHG
78-5-- Rev A of M Wiremount Socket Product Specification 78-5-- Released: -- Austin, TX 787-9 78-5-- Rev A Section Table of Contents of Page. Scope........ M Customer Documents......... Performance and
2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
2.mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard) DF1B Series Oct.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. New Insulation Displacement
SMA 50 Ohm Connectors Alphabetical Index INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE ON REQUEST
SMA 50 Ohm Connectors Alphabetical Index SMA Connectors - 50 Ohm Bulkhead Mount... 20 Custom Feedthroughs... 48 Dummy Loads... 37 End Launch... 16 Field Replaceable... 28 Flexible Cable... 8 In-Series
Small-sized, plastic type, push-pull lock connectors
Small-sized, plastic type, push-pull lock connectors RP17 Series Product Specifications Ratings Rated current Rated voltage Features 1. Superior mating operability Secure mating and easy unmating is achieved