M20 Connectors Specification
|
|
|
- Spencer Stokes
- 6 years ago
- Views:
Transcription
1 Specification mm pitch, with 0.64mm square male pin connection system. mm (.100") PITCH oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Male: Finish: Electrical Current: Voltage proof: Contact resistance: Insulation resistance: Standard or High Temperature Plastic, UL94V-0 Phosphor ronze Copper lloy See individual pages 3 per contact 800V C, 500V DC for 1 minute 30mΩ max 1,000MΩ min Mechanical Durability Gold finish: Tin finish: Insertion force (max) Female: Jumper sockets: Withdrawal force (min) Female: Jumper sockets: Vibration sensitivity: Shock severity: Environmental 300 operations 50 operations 2.0N per contact 12.5N total 0.3N per contact 1.0N total 50 2,000Hz, 3.13G, 45 minutes duration 294m/s 2 (30G) for 11ms Operating temperature: Solderability: Soldering heat resistance: -40 C to +105 C 245 C for 5 seconds 260 C for 10 seconds 201
2 Mating Profiles FEMLE VERTICL PC TIL VERTICL PC TIL HORIZONTL PC TIL VERTICL SMT VERTICL SMT Low Profile 6.29 HORIZONTL SMT CRIMP max mm (.100") PITCH HORIZONTL PC TIL 3.9mm Tail max max MLE HORIZONTL PC TIL 4.8mm Tail max max VERTICL SMT max HORIZONTL SMT High Profile Single Row * * * * * max max * max ll dimensions in mm. 202
3 mm (.100") PITCH Female Vertical PC Tail Twin beam phosphor bronze contacts. Suitable for use with mating M20 male pin headers, with 0.64mm square pins. SINGLE ROW Ø1.00 Recommended PC oard Pattern 0.65 DOULE ROW CLCULTION x (No. of contacts per row - 1) Ø Recommended PC oard Pattern M20-78 X XX XX 42 Gold + Tin 2 Single Row 3 Double Row NO. OF CONTCTS PER ROW 02 to 20, 25, 32, 36 ll dimensions in mm. 203
4 Female Horizontal PC Tail Two point solder fixing for connector rigidity. Twin beam contact for cost-effective reliability. Suitable for use with mating M20 male pin headers, with 0.64mm square pins. SINGLE ROW CLCULTION x No. of contacts per row x (No. of contacts per row - 1) mm (.100") PITCH Ø1.05 Recommended PC oard Pattern DOULE ROW CLCULTION x (No. of contacts per row - 1) Ø Recommended PC oard Pattern 7.87 M20-78 X XX XX 42 Gold + Tin 8 Double Row 9 Single Row NO. OF CONTCTS PER ROW 02 to 20, 25, 35, 36 Double Row 02 to 20, 25, 36, 40 Single Row ll dimensions in mm. 204
5 mm (.100") PITCH Female Vertical Surface Mount, Dual Entry Dual Entry sockets - can be used as either a top entry or bottom entry configuration. Twin beam contact for cost-effective reliability. Contact technical@harwin.com for Tape and Reel options. Suitable for use with mating M20 male pin headers, with 0.64mm square pins. SINGLE ROW 2.50 Ø Recommended PC oard Pattern 4.00 DOULE ROW CLCULTION x (No. of contacts per row - 1) 5.00 Ø Recommended PC oard Pattern M20-78 X XX XX 42 Gold + Tin 6 Single Row 7 Double Row NO. OF CONTCTS PER ROW 02 to 20 ll dimensions in mm. 205
6 Female Vertical Surface Mount, Dual Entry Dual Entry socket - can be used as either a top entry or bottom entry configuration. Twin beam contact for cost-effective reliability. Tape and Reel option supplied fitted with Pick and Place cap. Suitable for use with mating M20 male pin headers, with 0.64mm square pins. DOULE ROW CLCULTION x No. of contacts per row x (No. of contacts per row - 1) C mm (.100") PITCH C 1.78 Ø1.02 Ø Recommended PC oard Pattern C 1.20 Ø M XX 45 X NO. OF CONTCTS PER ROW PCKGING lank Loose R Tape & Reeled 02 to 10, 12, 15, Gold ll dimensions in mm. 206
7 mm (.100") PITCH Female Horizontal Surface Mount Rear tail configuration, to allow mounting right up to the edge of the PC. Supplied in Tape and Reel packaging as standard for use in automated assembly systems. SINGLE ROW DOULE ROW x CLCULTION Recommended PC oard Pattern x (No. of contacts per row - 1) Recommended PC oard Pattern NO. OF ROWS 1 Single Row 2 Double Row M20-79 X XX 42 R PCKGING R Tape & Reeled 42 Gold + Tin NO. OF CONTCTS PER ROW 02 to 06, 08, 10 ll dimensions in mm. 207
8 Female Crimp Housings Female crimp housing - contacts are ordered seperately (shown on following page). For polarising key use order code M SINGLE ROW CLCULTION DOULE ROW CLCULTION x No. of contacts per row mm (.100") PITCH x (No. of contacts per row - 1) x (No. of contacts per row - 1) M20-10 X XX 00 6 Single Row 7 Double Row NO. OF CONTCTS PER ROW 02 to 12 ll dimensions in mm. 208
9 mm (.100") PITCH Female Crimp Contacts, Polarising Key Loose or reeled contacts. Open crimp design, ideal for automation. Use with female crimp housings shown on previous page. CONTCTS HND CRIMP TOOL Reeled (continuous strip) Order code is for one reel of 10,000 contacts Instruction sheet is available at /instructions. For use with loose contacts ORDER CODE Z Loose (cropped) Order code is for one pack of 100 contacts. WIRE STRIPPING DETILS Ø1.60 to to 30 WG to 4.00 POLRISING KEY M20-11 X 00 XX Ø Reeled Contacts 8 Loose Contacts 42 Gold + Tin ORDER CODE M ll dimensions in mm. 209
10 Jumper Sockets - Open Top Can be fitted by hand, giving an alternative on-board programming method to DIP switches. Open top for use with test probes. Choice of colours available. Multi-use socket provides up to 300 operations (Gold). Twin beam contact for cost-effective reliability. Suitable for use with mating M20 male pin headers, with 0.64mm square pins. MULTI-USE HIGH FORCE, SINGLE OPERTION mm (.100") PITCH Exposed contact for probing Exposed contact for probing M75 XX - XX MULTI-USE SINGLE OPERTION 65 Grey Red lack lue 05 Gold ll dimensions in mm. 210
11 mm (.100") PITCH Jumper Sockets - Closed Top Can be fitted by hand, giving an alternative on-board programming method to DIP switches. Twin beam contact for cost-effective reliability. Suitable for use with mating M20 male pin headers, with 0.64mm square pins. Choice of colours available. Flexible handle for ease of location and withdrawal. 14mm FLEXILE HNDLE 10mm FLEXILE HNDLE SOLID HNDLE M7 XXX - XX 14mm HNDLE 10mm HNDLE SOLID HNDLE Grey Red lack lue 05 Gold ll dimensions in mm. 211
12 Male Vertical Single Row PC Tail Suitable for use with female connectors and jumper sockets shown on previous pages. Choice of mating pin lengths. Pin headers can be cut into smaller sizes. lso available with variable dimensions. 5.8mm 6.1mm mm (.100") PITCH 5.80 Gold 6.10 Tin 7.0mm Ø Recommended PC oard Pattern CLCULTION x No. of contacts per row x (No. of contacts per row - 1) M20-9 XX XX XX mm Mating Height mm Mating Height mm Mating Height 42 Gold + Tin (M20-977) 45 Gold (M20-973, 999) NO. OF CONTCTS PER ROW 02 to 20, 25 to 28, 36, mm Mating Height 02 to 20, 25, 26, 32, 36, mm Mating Height 02 to 20, 23, 25, 30 to 33, 36, mm Mating Height ll dimensions in mm. 212
13 mm (.100") PITCH Male Vertical Double Row PC Tail Suitable for use with female connectors and jumper sockets shown on previous pages. Choice of mating pin lengths. Pin headers can be cut into smaller sizes. lso available with variable dimensions. 5.8mm 6.1mm 5.80 Gold 6.10 Tin 7.0mm 7.00 Ø1.00 Recommended PC oard Pattern CLCULTION x No. of contacts per row x (No. of contacts per row - 1) M20-9 XX XX XX mm Mating Height mm Mating Height mm Mating Height 42 Gold + Tin (M20-976) 45 Gold (M20-972, 998) NO. OF CONTCTS PER ROW 02 to 20, 24, 25, 36, mm Mating Height 02 to 20, 25, 36, mm Mating Height 02 to 20, 23 to 25, 32, 36, mm Mating Height ll dimensions in mm. 213
14 Male Horizontal Single Row PC Tail Horizontal orientation for 90 board-to-board applications. Suitable for use with female connectors and jumper sockets shown on previous pages. Choice of mating pin lengths. Pin headers can be cut into smaller sizes. lso available with variable dimensions. 5.8mm 6.1mm mm (.100") PITCH 5.80 Gold Tin mm Ø Recommended PC oard Pattern CLCULTION x No. of contacts per row 1.40 x (No. of contacts per row - 1) M20-9 XX XX XX mm Mating Height mm Mating Height mm Mating Height 42 Gold + Tin (M20-975) 45 Gold (M20-971, 996) NO. OF CONTCTS PER ROW 02 to 20, 22, 23, 26, 36, mm Mating Height 02 to 20, 25, 36, mm Mating Height 02 to 20, 24, 25, 36, mm Mating Height ll dimensions in mm. 214
15 mm (.100") PITCH Male Horizontal Double Row PC Tail Horizontal orientation for 90 board-to-board applications. Suitable for use with female connectors and jumper sockets shown on previous pages. Choice of mating pin lengths. Pin headers can be cut into smaller sizes. lso available with variable dimensions. 5.8mm 6.1mm 5.80 Gold Tin 7.0mm 7.00 Ø Recommended PC oard Pattern CLCULTION x No. of contacts per row 0.64 square x (No. of contacts per row - 1) M20-9 XX XX XX mm Mating Height mm Mating Height mm Mating Height 42 Gold + Tin (M20-974) 45 Gold (M20-970, 995) NO. OF CONTCTS PER ROW 02 to 20, 22, 25, 27, 36, mm Mating Height 02 to 20, 25, 36, mm Mating Height 02 to 20, 24, 25, 32, 36, mm Mating Height ll dimensions in mm. 215
16 Male Vertical Surface Mount Single Row Pin headers can be cut into smaller sizes. lso available with variable dimensions. Tape and Reel option supplied fitted with Pick and Place cap, contact for availability. Suitable for use with female connectors and jumper sockets shown on previous pages. SINGLE ROW CLCULTION x No. of contacts per row x (No. of contacts per row - 1) mm (.100") PITCH Recommended PC oard Pattern NO. OF CONTCTS PER ROW 02 to 20, 25, 36 Loose 02 to 20 Pick and Place cap, tube 02, 03, 04, 06, 08, 10, 15, 19 Tape & Reeled M XX XX X PCKGING lank Loose P Pick and Place cap, tube R Tape & Reeled 42 Gold + Tin ll dimensions in mm. 216
17 Male Vertical Surface Mount Double Row mm (.100") PITCH Pin headers without pegs can be cut into smaller sizes. Peg option to assist with location during surface mount process. lso available with variable dimensions. Tape and Reel option supplied fitted with Pick and Place cap, contact for availability. Suitable for use with female connectors and jumper sockets shown on previous pages. WITHOUT PEGS CLCULTION x No. of contacts per row WITH PEGS CLCULTION x No. of contacts per row x (No. of contacts per row - 1) x (No. of contacts per row - 1) C C 2.10 Ø C Ø Recommended PC oard Pattern 1.00 Recommended PC oard Pattern 6 Without Pegs 5 With Pegs M20-87 X XX XX X PCKGING lank Loose P Pick and Place cap, tube (Without Pegs) R Tape & Reeled NO. OF CONTCTS PER ROW 02 to 20, 25, 36 Without Pegs (Loose) 02 to 20, 23 Without Pegs (Tube) 02 to 08, 10 With Pegs (Loose) 02, 03, 05, 07, 08, 10 With Pegs (Reeled) 42 Gold + Tin (Without Pegs) ll dimensions in mm. 217
18 Male Horizontal Surface Mount Single Row Pin headers can be cut into smaller sizes. Contact for Tape and Reel options. Suitable for use with female connectors and jumper sockets shown on previous pages. Horizontal orientation for 90 C board-to-board applications. STNDRD PROFILE mm (.100") PITCH HIGH PROFILE Recommended PC oard Pattern CLCULTION x No. of contacts per row x (No. of contacts per row - 1) Recommended PC oard Pattern 889 Standard Profile 890 High Profile NO. OF CONTCTS PER ROW 02 to 06, 08, 10 Standard Profile 03 to 20 High Profile M20-8XX XX 05 X PCKGING lank Loose R Tape & Reeled (Standard Profile) 05 Gold (High Profile) 45 Gold (Standard Profile) ll dimensions in mm. 218
19 mm (.100") PITCH Male Horizontal Surface Mount Double Row Pin headers can be cut into smaller sizes. Contact for Tape and Reel options. Suitable for use with female connectors and jumper sockets shown on previous pages. Horizontal orientation for 90 board-to-board applications. DOULE ROW CLCULTION x No. of contacts per row x (No. of contacts per row - 1) Recommended PC oard Pattern M XX Gold NO. OF CONTCTS PER ROW 02 to 20 ll dimensions in mm. 219
20 Pin Header Variants If you are unable to specify the connector you require from our standard range of M20 connectors, use the order code below to create an application-specific connector. Contact for further information, or search online for M20-XXX. Suitable for use with female connectors shown on previous pages. TERMINTION STYLES mm (.100") PITCH Vertical PC Tail V Series W Series Horizontal PC Tail H Series J Series Pin section is 0.64mm square. PC mounting hole is Ø1.00mm. Pin section is 0.64mm square. PC mounting hole is Ø1.00mm. Maximum dimension is 6.00mm Extended PC Tail Pin section is 0.64mm square. PC mounting hole is Ø1.00mm. E Series F Series Vertical SMT Extended SMT Pin section is 0.64mm square. For PC pad layout see standard Male SMT pin header. dimension is 000 on S series S Series T Series 1.59 DIMENSION Example: 7.8mm = 078 DIMENSION Example: 5.0mm = 050 M20 - XXX XXX X XX XX 05 Gold NO. OF CONTCTS PER ROW 02 to 40 SINGLE ROW DOULE ROW V W Vertical H J Horizontal E F Extended S Surface Mount T Extended Surface Mount ll dimensions in mm. 220
M22 Connectors Specification
Specification 2mm pitch, with 0.5mm square male pin connection system. oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Jumper socket: Male: Finish: Electrical
.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
![.100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES](/thumbs/86/94150234.jpg ".100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES")
Introduction: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements. vailable in Single,
Datamate Connectors Female Vertical PC Tail
Female Vertical PC Polarised mouldings. For ritish Standard versions see pages 14 to 15. Dummy contacts for additional polarisation use order code M80-023. Mates with male connectors on pages 21 to 25.
COMPONENT SPECIFICATION M20 SERIES CONNECTORS AUGUST 2016 CONTENTS: SECTION TITLE PAGE. 1 Description of Connector and Intended Application 2
AUGUST 2016 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Gauges 5 APPENDICES NOTES: 1. Third angle projection
.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
![.100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES](/thumbs/90/102427427.jpg ".100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES")
dam Technologies, Inc. INTRODUCTION: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements.
Gecko Connectors Introduction
Gecko onnectors Introduction Gecko is a mm pitch High-Reliability connector range from Harwin. Improving on the popular 2mm pitch Datamate series, and harnessing the modern technology of micro-machining,
Spring Loaded Contacts
Spring Loaded Contacts Contents ATE Spring Probes Specifications One Part Probes Two Part Probes Spring Loaded Contacts Specifications Spring Loaded Contact Connectors Single Spring Loaded Contacts SMT
JULY 2014 SECTION TITLE PAGE. 1 Description of Connectors and Intended Applications 2. 2 Marking of Connector and/or Package 2.
M80 & M83 SERIES RECTANGULAR CONNECTORS JULY 204 SECTION TITLE PAGE Description of Connectors and Intended Applications 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix Contact Orientations
PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS
BOARD/WIRE-TO-BOARD CONNECTORS PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS Minitek Headers for Pin-in-Paste Processes OVERVIEW Minitek is FCI s brand for board-to-board and wire/cableto-board connectors
SECTION TITLE PAGE. 1 Description of Connectors and Intended Applications 2. 2 Marking of Connector and/or Package 2. 3 Ratings 3
C0053 M80 & M83 SERIES RECTANGULAR CONNECTORS FEBRUARY 8 SECTION TITLE PAGE Description of Connectors and Intended Applications 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix Contact Orientations
2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection
.5mm Pitch Connectors for Full Lock and Discrete Wire Connection DF1E Series UL, C-UL Listed Full lock function added Inner-lock system full lock mechanism Features 1. Full Lock Function dded The inner
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) DF Series Features 1. Correspond to oard Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header (1) Low
0.80mm SUB-MICRO HEADERS 1.00mm MICRO HEADERS
dam Technologies, Inc. 0.80mm SU-MIRO HRS 1.00mm MIRO HRS.031" [0.80] & " NTRLIN MPH & SPH / MRS & SRS INTROUTION: dam Tech 0.8mm and 1.00mm and Female Header series is a fine pitch, low profile, dual
2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features Correspond to Board Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header In-line
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Gauge Size
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
IDC Plug: WTB INTER CONNECT APPLICATIONS FEATURES AND BENEFITS ENVIRONMENTAL MECHANICAL ELECTRICAL HOW TO ORDER 00X
AVX developed the 9159 Series of SMT connectors for co-planar PCB mating for the challenging Solid State Lighting (SSL) market. These connectors needed to be small, low in height, carry up to 5 Amps/contact
PRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
Discrete Wire IDC Contact & Cap
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
1.25mm Pitch Miniature Crimping Connector (UL Listed)
1.25mm Pitch Miniature Crimping Connector (UL Listed) DF13 Series Type Mounting Type Mounting Height(h) Features 1. Miniature Size Designed in the low profile at mounting height 5.8mm. (SMT mounting straight
SSL - Discrete Wire IDC Contact & Cap
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
Connector MACHINE PIN SOCKET EMS SERIES FEATURES SPECIFICATIONS KINDS OF BASE
MACHINE PIN SOCKET EMS SERIES Connector FEATURES Funnel shaped four-fingered and six-fingered contacts provide easy IC insertion and withdrawal, high reliability Gold plated contact to ensure low contact
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 0XX. Wire Gauge Size. Code Accepted Wire Cap Code Wire Gauge Insulation Pages 6-7
The 917X series of surface mount Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from
AVX Wire-to-Board Connectors
AVX Wire-to-Board Connectors www.avx.com Version 11.11 Table of Contents INSULATION DISPLACEMENT CONNECTORS (IDC) WIRE TO BOARD (WTB) DISCRETE WIRE IDC SERIES 9175...................................................................................
5mm Pitch Miniature Potting Connectors for Secondary Power Supply
5mm Pitch Miniature Potting Connectors for Secondary Power Supply DF5 Series Single row type Features 1. Potting Product This connector is capable of potting 9mm maximum, and 22.5mm mounting height is
2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves the low profile.. Insulation Displacement Area Protected by
Poke-Home: Inverted Thru Board AWG: WTB INTER CONNECT FEATURES AND BENEFITS APPLICATIONS ELECTRICAL MECHANICAL ENVIRONMENTAL
AVX continues to develop innovative connectors for the industrial electronics market that provide significant benefits over existing, outdated connector solutions. Listening to the design engineering community,
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 5XX. Wire Gauge Size
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
sealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
1.7mm pitch, Low Profile Wire-to-oard onnectors for Power Supplies DF Series (UL, -UL, Listed) Lock structure and operation Socket Latch Header Latches are deflected slightly during mating. Features 1.
Standard AWG: WTB
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
TY3085/6 SERIES. 3.00mm Pitch Wire To Wire Connector. Specification. Circuits. Kingmate
3.00mm Pitch Wire To Wire Connector Assembly Layout Right Angle Type DIP-Type Specification Circuits Pitch Current Rating Voltage Rating Contact Resistance Withstand Voltage Insulation Resistance Temperature
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 0XX. Contact Size. Contact Wire Max Size Gauge Insulation mm Contact
The Industrial and Solid State Lighting markets continue to look for new products which will reduce size and cost without jeopardizing performance. The new dual-beam boxed contact system from AVX surface
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Gauge Size. Code Accepted Max Wire Gauge Insulation AWG Solid or Stranded
AVX continues to develop innovative connectors for the industrial electronics market that provide significant benefits over existing, outdated connector solutions. Listening to the design engineering community,
2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
2mm Double-Row Connector (Product Compliant to UL/CSA Standard) DF11 Series Features 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
IDC Plug: WTB Through Wire Cap/Wire Stop Cap
AVX developed the 9159 Series of SMT connectors for co-planar PCB mating for the challenging Solid State Lighting (SSL) market. These connectors needed to be small, low in height, carry up to 5 Amps/contact
1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
Features 1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies DF65 Series 1. Enhanced contact reliability and lock structure The unique locking structure reinforces the engagement between
lif flex CirCUit ConneCtor 2.54mm [.100"] CeNTerliNe 1.25mm [.049"] CeNTerliNe 1.00mm [.
![lif flex CirCUit ConneCtor 2.54mm [.100] CeNTerliNe 1.25mm [.049] CeNTerliNe 1.00mm [.](/thumbs/80/80818919.jpg "lif flex CirCUit ConneCtor 2.54mm [.100] CeNTerliNe 1.25mm [.049] CeNTerliNe 1.00mm [.")
dam Technologies, Inc. INTRODUTION: dam Tech P Dual Series Port D-Sub Flexible onnectors Printed ircuit provide (FP) the and means Flexible to increase Flat able I/O (FF) without connectors utilizing are
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features 1. Correspond to Board Design in Wide Variation Crimp Socket Receptacle Pin Header (1) Low profile
2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Jul.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves
PRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
Amphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications
Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility
Surface Mount Connectors
Surface Mount Connectors 3 As the industry s first surfacemountable connectors to be supplied on a continuous reel, our surface mount connectors are designed to be used as part of Zierick s Surf-Shooter
1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies
NEW 1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies DF65 Series (UL Pending) Lock structure and operation Socket Header Latch Latches are deflected slightly during mating. Features
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. D 3.00 to 7.92mm (.118 to.312") Pitch FEATURES AND SPECIFICATIONS Features
Standard I/O, 15 Position
The 9157 series was specifically designed for portable equipment. AVX now offers this two-part system as a standard product. The fixed SMT socket is designed to be housed within the confined dimensional
PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
1.0 SCOPE 1 of 8 E This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of the latest
2.54mm Pitch Bottom Entry Type Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. EPower Connectors 4.20mm (.165") Pitch Mini-Fit Plus Terminal 46083 Crimp,
Operating Temperature: -40ºC to +125ºC 6XX. Wire Gauge Size
AVX developed the initial SMT discrete wire IDC connector 5 years ago for 26-28AWG AVX wires. Since then, we have seen this Wire-to-Board (WTB) contact technology spread to multiple wire gauges and multiple
10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cableto-board and cable-to-cable applications with protection up to IP65 / IP67. At the same time, applications up to 2.5
D Subminiature Combo D
Cable ( 8) Loose Contacts Coaxial 75 Ohm Stamped Crimp/Crimp Recommended Wire Trim Dimensions Kit (ody, Ferrule, Center Contact) Stamped Crimp/Crimp Kit Kit 30 in. Kit 50 in. RG Cable Number D130322-2
PRODUCT SPECIFICATION
MINI-FIT SR. SERIES 1.0 SCOPE This specification covers the 10.00 mm / (.394 in.) centerline tin and gold, silver plated connector series, single and dual row versions in wire to wire and wire to printed
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPEIFIATIONS Features and Benefits Board-mounting pegs provide
HEADER & HOUSING SYSTEMS
dam Technologies, Inc. HEDER & HOUSING SYSTEMS.8mm, 1mm, 1.25mm, 1.5mm, 2mm & 2.5mm INTRODUTION: dam Tech 2H & 2SH Series of multiple pitch Headers and Housings are a matched set of rimp Wire Housings
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Insulator Color 9 = UL White 8 = UL Black Special Order
The market and applications for simple and reliable discrete Wire-to-Board connectors continue to evolve. AVX first introduced the 9175 series of surface mountable Insulation Displacement Connectors (IDC)
2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR R PC board layout (viewed from component side) and Assembly layout
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Secure locking device Solder crack preventive material Low insertion force Insertion guide mechanism Applicable to automatic board
XA CONNECTOR. 1Certified LR R
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Specifications Current rating: 3 A AC DC (AWG #22, #20) Voltage rating: 250 V AC DC Temperature range: -25 C to +85 C (including
IT - ITS - ITS-RG - ITZ Connectors
CONNECTOR CONTCTS Series Presentation Contacts in this chapter can be used for the following circular connector series: IT, ITZ, ITS and ITS RG. Threaded IT series have been designed to be fully conform
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 1X3. Contact Style
AVX continues to develop innovative connectors for the industrial electronics market that provide significant benefits over existing, outdated connector solutions. The latest release is single vertical
MAIN FEATURES TECHNICAL DATA MATERIALS MECHANICAL ELECTRICAL. Glass filled polyester rated UL94 V-O Copper alloy plated hard acid gold
GENERAL INFORMATION MAIN FEATURES 2,54mm (0,1 ) pitch Fixed or replaceable contacts. Cantilever or bifurcated contacts. Cut to any size from 5 to 85 contacts single or 10 to 170 double sided. Suitable
PRODUCT SPECIFICATION
2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
Electrical dielectric withstanding voltage. sea level Vrms Vrms m Vrms Vrms
Applications Mechanical and electrical interface between on-board civil avionics equipments and racks Standards Arinc 600 Characteristics Mechanical material finish aluminum alodine 00 shells alloy to
Rated current. Dielectric withstanding voltage
mm Pitch Connectors HDR series Interface Connectors Outline HDR series connectors are very small surface mount (SMT) interface connectors with their contacts arranged at a pitch of mm, designed for the
10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cable-to-board and cable-to-cable applications with protection up to IP 65 / IP 67. At the same time, applications up to
By using this Adapter a connection between Socket and Emulator or programming device can be easily achieved.
Series Introduction QFP-Production Use Socket and Emulation-Adapter YAMAICHI's IC149-Series is available in many different formats, from 44 pins to 240 pins. It is designed to fit most of the common semiconductors
Surface Mount Header Assembly Employs Capillary Action
New Product Technology Surface Mount Header Assembly Employs Capillary Action Zierick s unique header assembly features capillary action to improve solder joint strength. As a result, pin retention force
High Speed, Matched-Impedance, Parallel Board-to-board Connector System
NEW High Speed, Matched-Impedance, Parallel Board-to-board Connector System IT Series (2 required) IT Series Outline High-speed matched-impedance parallel board-to-board connector designed for applications
PRODUCT SPECIFICATION
SMT SHIELDED JACKS W.E. TYPE SYSTEM 1.0 SCOPE This specification covers the Molex shielded W.E. type product line which comprises a shield plug (male) and a jack (female) I/O type connector. This system
Setting Standards Connectors M 16
Setting Standards Connectors M 16 inclusive 15 Product Overview 16 Housings page 18 Inserts page 22 Accessories page 29 Technical Data M 16 Control Signal Connectors Mechanical Data Housing Materials and
75 Ω Small Coaxial Connectors (SMT Low Profile)
NEW 75 Ω Small Coaxial Connectors (SMT Low Profile) H.FL75 Series 75 ø, up to 3 GHz Figure Connector mating external view 6.5 Mar..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features.
2mm Pitch 2 Piece Battery Connector. Horizontal/Vertical
FEATURES Low profile battery connectors (GF21/GF22/GF31 only) with 2.6mm (.12") height. 2 piece type with a highly reliable connection Sequence connection (FMLB : First Mate Last Break, 1 pin only) is
SERIES SMB SUBMINIATURE CONNECTORS
SERIES SMB SUBMINIATURE CONNECTORS DESCRIPTION CONTENTS PAGE The HUBER+SUHNER subminiature connectors Series SMB, SMC, SMS have the same basic design. They only differ with regard to their coupling mechanism.
2 2.2 mm Pitch, Wire-to-Wire Connectors for Small Spaces
2 2.2 mm Pitch, Wire-to-Wire Connectors for Small Spaces DF62 Series Compact shape due to 2 x 2.2 grid layout of pins *Both are 7 contacts with 3A current rating 16 16 Existing products DF62 Fig.1 Features
242, , FAX.
TEL. 886 2 8994 1601, FAX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information SMA SMB Subminiature Connectors Screw Lock Subminiature Connectors Snap Lock 50 Ω 18 GHz
D-subminiature Metal Shell Crimp and Poke, Right-Angle and Vertical PCB D*U Series
Crimp and Poke, Right-Angle and Vertical PCB Offered in 9, 15, 25, 37, and 50 position plugs and sockets (except right-angle PCB connectors- 9, 15, and 25 positions). FEATURES Available with gold flash
Modular Plug Connectors compliant to Cat.6 A Standard
Modular Plug Connectors compliant to Cat.6 A Standard TM3P Series Features. Support High-Speed LAN transmission Improved performance by two row contact arrangement. Conforms to Cat.6 A requirements of
Small-sized, plastic type, push-pull lock connectors
Small-sized, plastic type, push-pull lock connectors RP17 Series Product Specifications Ratings Rated current Rated voltage Features 1. Superior mating operability Secure mating and easy unmating is achieved
0.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable
.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable DF8 Series Superb mating operability Features 1. Supports high speed connections The single row alignment utilizes a.5mm pitch to support
SW 16mm. SW 15mm. SW 19mm
M B-Coding Automation Technology 7 series Screw locking acc. to DIN EN 6076--0 Degree of protection IP67 Moulded versions Degree of protection IP68 Easy assembly Excellent EMC shielding Versions with shielding
1.27mm Pitch Connector
1.27mm Pitch Connector FX1 Series DIN duplex density mount has been achieved. (DIN 96 contacts and FX1 192 (96x2) Photo 1 Features 1. High density and space saved-din Duplex Mount Achieved The alignment
SECTION 7 R114 / R115 / R116 / R117 / R112
SECTION 7 7 smb / SMB-LOCK / SMC R114 / R115 / R116 / R117 / R112 Contents SMB Introduction... 7-4 to 7-5 Interface... 7-6 Characteristics... 7-7 to 7-8 Plugs... 7-8 to 7-9 Jacks...7-9 to 7-10 Bulkhead
Surf-Shooter SMT Surface Mount Connectors
New Product Technology Surf-Shooter SMT Surface Mount Connectors Zierick s surface mount terminals feature internal holes or slots at the base which foster a capillary solder wicking action for improved
MX150L tm INDUSTRIAL SEALED CONNECTOR SYSTEM
MX150L tm INDUSTRIAL SEALED CONNECTOR SYSTEM The MX150L Industrial Sealed Connector System is IP67 rated and conforms to UL 1977, but it is NOT suitable for automotive applications with requirements such
WIRE-PRESS SOCKETS (AXW)
FOR PC BORD TO WIRE XW WIRE-PRESS SOCKETS (XW) FETURES 1. Pressure welding method for superior wiring and no need to strip wires. pplicable wires: WG #22, #24, #26, #28. 2. Two pressure weldings assure
PC BOARD CONNECTORS 720M SERIES (CRIMP TYPE CONNECTORS)
PC BOARD CONNECTORS 720M SERIES (CRIMP TYPE CONNECTORS) FEATURES The 720 series connectors (crimp type connectors) are designed for a wide range of uses. 1-row and 2-row types are available to allow various
Broadband performance with low reflection DC to 4 GHz provides low cost connector combined with high quality.
Amphenol RF 36 Connectors Description The name derives from SubMiniature B (the second subminiature design). Developed in the 1960 s, this sub miniature interface has snap-on coupling. Amphenol s connectors
SMB Connectors. RF Coax Connectors. Product Facts
SMB Connectors Product Facts SMB offers snap-fit coupling for quick connect/disconnect Choice of Commercial or High Rel Connectors 50 and 75 Ω MIL-Type connectors available Straight plugs and jacks are
2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
2.mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard) DF1B Series Oct.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. New Insulation Displacement
Varicon. Contents. The Varicon Range Introduction to Varicon Tools Page 26. Series 7008 Page 6. Series 7022 Page 8. Series 8020 Page 27
AVX Varicon Contents The Varicon Range............................................................ 2 Introduction to Varicon........................................................ 3 Series 7008 Page 6
CF Series AXC5/AXC6. FEATURES 1. Vertical mating type with a 0.8 mm mated height low profile design
For board-to-micro coaxial wire Micro coaxial connectors (Low profile) AC5/AC6 CF Series 2. with strong resistance to various environments provides high contact reliability and facilitates connection work
RR-HR. Simplify your cable assemblies REAR RELEASE CRIMP CONNECTORS RR-HR / E11. D-Sub connectors - Stamped and Formed Contacts.
RR-HR D-Sub connectors - Stamped and Formed Contacts REAR RELEASE CRIMP CONNECTORS CHARACTERISTICS Specifications Connectors according to MIL C24308 Materials and Platings Shells Tinned steel with or without
Remote Input/Output Terminal System (RITS) Connectors
Product Facts Termination by generic tools Small.0 mm [.079] centerline connectors Two contact points structure provides for high contact reliability Housing colors indicate applicable wire range omponent
PRODUCT SPECIFICATION
0.8x1.2 mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 0.8x1.2mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug
Pluggable connection describes the method used to connect an external conductor to a PCB, via a terminal connector and header
Pluggable PCB terminals and headers Pluggable connection describes the method used to connect an external conductor to a PCB, via a terminal connector and header System features plug in system is simple
PRODUCT SPECIFICATION
i TM / i+ TM 0.8 mm PITCH I/O CONNECTOR SYSTEM of TABLE OF CONTENTS.0 SCOPE... 3.0 PRODUCT DESCRIPTION... 3. PRODUCT NAME AND SERIES NUMBER(S)... 3. DIMENSION, MATERIALS, PLATING AND MARKINGS... 3.3 SAFETY
CALL (512 ) x6400
The AirBorn stackable compliant connector family is one of AirBorn s solutions for high-density, board-to-board stacking applications. This connector family is available in 0.075 contact spacing and 100
Hyperboloid Contacts for High Performance Connectors
Hyperboloid Contacts for High Performance Connectors ICS SERIES Technology Company, Inc. integramate Hyperboloid Contacts QA Technology integramate Contacts are high quality, high reliability hyperboloid
SINGLE POLE SOCKETS - SOLDER MOUNT
SINGLE POLE SOCKETS - SOLDER MOUNT 450 - XXXX - XX - XX - 00 Body Brass Copper* Spring Beryllium Copper (Heat Treated) Dash Body Spring RoHS -03 Gold over Nickel Gold over Nickel -04 Electro-Tin Electro-Tin