By using this Adapter a connection between Socket and Emulator or programming device can be easily achieved.

Size: px

Start display at page:

Download "By using this Adapter a connection between Socket and Emulator or programming device can be easily achieved."

Arron Pitts
5 years ago
Views:

Series Introduction QFP-Production Use Socket and Emulation-Adapter YAMAICHI's IC149-Series is available in many different formats, from 44 pins to 240 pins.

Since the space required for this Socket is the same as the semiconductoritself, there is no need to change the PC- Board-Layout after finishing the experimental stage.

The insertion and fixing of the IC can be easily achieved by bolting the engaging top frame. To secure the Socket before soldering, it is also available with positioning pins.

By using this Adapter a connection between Socket and Emulator or programming device can be easily achieved. Instead of the IC, the Adapter is bolted to the Socket.

1 Series Introduction QFP-Production Use Socket and Emulation-Adapter YAMAICHI's IC149-Series is available in many different formats, from 44 pins to 240 pins. It is designed to fit most of the common semiconductors from various manufacturers. The PC-Board-Layout for this SMT-Socket-Series virtually corresponds to that of the semiconductor. Since the space required for this Socket is the same as the semiconductoritself, there is no need to change the PC- Board-Layout after finishing the experimental stage. Once the Socket is no longer required for trials or testing, it can be removed without the necessity to redesign the PC-Board-Layout. The insertion and fixing of the IC can be easily achieved by bolting the engaging top frame. To secure the Socket before soldering, it is also available with positioning pins. IC149 - Socket Another advantage of the IC149-Series is the YAMAICHI ICP-Emulation-Adapter, available for pin counts from 44 to 160 pins. By using this Adapter a connection between Socket and Emulator or programming device can be easily achieved. Instead of the IC, the Adapter is bolted to the Socket. The Adapter has through hole pins, disentangled in a 3 or 4 row rough pitch for connection to a printed circuit board. IC149 - Socket with Emulation-Adapter SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Production Sockets 331 PRODUCTION SOCKETS - QFP / SOP / PLCC Packages

2 Available Sockets Overview Socket IC - Package IC-Body Size IC *52-B5 IC *49-B5 IC *69-B5 IC *75-B5 IC *08-B5 IC *01-B5 IC *31-B5 IC *30-B5 IC *51-B5 IC *17-B5 IC *21-B5 IC *12-B5 IC *25-B5*1) IC *54-B5*1) IC B5 IC *14-B5 IC *42-B5 IC *43-B5 IC *80-B5 IC *15-B5 IC *45-B5*1) IC B5 IC *23-B5 IC *66-B5 IC *61-B5 IC *67-B5 QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch BQFP pitch QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch 10 x x x x x x x x x x x x x x x 32 Explanation: * in the ordering code to be replaced by 0 = without positioning pin or 1 = with positioning pin. 1) IC *25-B51 and IC *54-B51 are without SMT fixing metal IC-Dimensions (total) x x x ~20.1 x 23.6~ x x x x x x x x x x x x x x 34.6 Adapter Part No. ICP ICP ICP ICP ICP ICP ICP ICP ICP ICP ICP ICP ICP ICP ICP ICP ICP ICP ICP SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Production Sockets

3 QFP Socket Cross-Reference IC-Package QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch BQFP pitch QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch QFP pitch **Socket variations are for reference only. To ensure for a suitable socket when ordering it is advisable to first contact Yamaichi IC - Description Socket Variations and Ordering Codes** IC-Body Size IC-Dimensions (total) Production-Use IC149 Test & Burn-In Clamshell Test & Burn-In Open Top 10 x x x x x x x x x x x x x x x x x ~20.1 x 23.6~ x x x x x ~20.1 x 23.6~ x x x x x x x x x 34.6 IC *52-B5 IC *49-B5 IC B5 IC B5 IC *08-B5 IC *01-B5 IC *31-B5 IC *30-B5 IC *51-B5 IC *17-B5 IC *21-B5 IC *12-B5 IC *25-B5 IC B5 IC *14-B5 IC *54-B5 IC *42-B5 IC *43-B5 IC *80-B5 IC *15-B5 IC *45-B5 IC B5 IC *23-B5 IC *66-B5 IC *61-B5 IC *67-B5 IC IC IC IC IC IC IC IC KS IC IC IC IC KS IC IC IC IC IC / or -7 IC IC IC IC x IC IC IC IC IC IC IC IC IC IC IC _ IC / or -034 IC IC IC SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Production Sockets 333

4 QfP Socket Specifications Outline Socket Dimensions Contact Resistance: 30mΩ max. at 10mA and 20mV A Dielectric Withstanding Voltage: 100V eff to 700V eff for 1 minute Insulation Resistance: 500MΩ at 150V DC Operating Temperature Range: -25 C to +85 C Temperature for Reflow-soldering: 220 C for 60 seconds (VPS) 220 C to 250 C for 60 seconds (IR) Insulation Housing: Polyphenylenesulfide (PPS) glass filled UL94V-0 Contacts: Beryllium Copper (BeCu) Plating Indication: Mating Face = Au 0.3µm min. over 2.5 ~ 4.5µm Ni Solder Face = Au 0.05µm min. over 2.5 ~ 4.5µm Ni Mating Cycles: 20 insertions maximum Maximum Allowable Torque: - for 1-time screw connection: max Nm - for repetitive screw connection: min Nm max Nm D B C Remarks E x F For reference only! 1. Ensure a clean contact area. Fluxes, dust and other impurifications may cause corrosion and contact problems. 2. This Socket is not for automatic production. It is particulary suitable for the development of software stored in ROM and for testing LSI-IC's. 3. Careful attention must be taken when fixing the Socket, since it is entirely made from thermoplastic material. If the max. torque is exceeded, the Socket will be damaged beyond repair. 4. If using the Socket with an Adapter, please use the gold-plated Socket version. Socket Dimensions A B C D E x F IC *52-B x IC *49-B x IC *69-B x IC *75-B , x IC *01-B x IC *08-B x IC *12-B x IC *17-B x IC *21-B x IC *30-B x IC *31-B x IC *51-B x IC *05-B x IC *14-B x IC *25-B5* x IC B x IC *54-B5* x IC *42-B x IC *43-B x IC *80-B x IC *15-B5* x IC *45-B x IC *23-B x IC B x IC *66-B x IC *61-B x IC *67-B x Trading Division 334 SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Production Sockets

Emulation-Adapter Specifications Outline Adapter Dimensions Contact Resistance: 30mΩ max. at 10mA and 20mV Dielectric Withstanding Voltage: 700V AC for 1 minute For reference only!

5 ~ 4.5µm Ni Mating Cycles: 100 times minimum Maximum Allowable Torque: - for 1-time screw connection: max 0.147 Nm - for repetitive screw connection: min 0.078 Nm max 0.

Careful attention must be taken when fixing the Adapter, since it is made from thermoplastic material. By exceeding the maximum torque a perfect performance can no longer be guaranteed.

62 30.62 32.42 21.90 26.42 15.00 6.20 2.4 ICP-080-4 29.32 29.32 25.53 15.00 25.53 15.90 6.20 2.4 ICP-080-5 36.62 30.62 32.42 21.90 26.42 6.20 2.4 ICP-080-6 27.00 27.00 14.50 14.50 8.08 2.

28 8.08 2.4 ICP-100-6 34.50 34.50 31.81 21.28 31.81 21.00 5.50 3.1 ICP-112-2 35.00 35.00 31.53 21.00 31.53 6.20 2.4 ICP-120-2 28.00 28.00 16.50 16.50 8.08 2.4 ICP-128-2 43.90 43.90 8.08 2.4 ICP-144-1 35.

5 Emulation-Adapter Specifications Outline Adapter Dimensions Contact Resistance: 30mΩ max. at 10mA and 20mV Dielectric Withstanding Voltage: 700V AC for 1 minute For reference only! A H G Insulation Resistance: 500MΩ at 150V DC Operating Temperature Range: -25 C to +85 C B F E Insulation Housing: PES, glass filled UL94V-0 Contacts: Phosphor Bronze Plating: Au 0.3µm min. over 2.5 ~ 4.5µm Ni Mating Cycles: 100 times minimum Maximum Allowable Torque: - for 1-time screw connection: max Nm - for repetitive screw connection: min Nm max Nm Adapter Dimensions D C Remarks 1. Ensure a clean contact area. Fluxes, dust and other impurifications may cause corrosion and contact problems. 2. Careful attention must be taken when fixing the Adapter, since it is made from thermoplastic material. By exceeding the maximum torque a perfect performance can no longer be guaranteed. A B C D E F G H ICP ICP ICP ICP ICP ICP ICP ICP ICP ICP ICP ICP ICP ICP ICP ICP ICP ICP Extender for Emulation-Adapter For additional height we offer a separate extender, which can be stacked on top of the ICP-Emulation-Adapter : Ext 4.2-ICP-***-* (extends the height of ICP by 4.2mm) Contact Plating: Au over Ni : Ext 8.8-ICP-***-* (extends the height of ICP by 8.8mm) Contact Plating: Au over Ni SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Production Sockets 335 PRODUCTION SOCKETS - QFP / SOP / PLCC Packages

6 0.4 mm pitch 120 Pins - QFP/TQFP120 (30 x 30 pins) 14mm x 14mm 2.90 max. IC B5 (without positioning pins) ICP IC B5 (with positioning pins) ICP Notes: : Metal soldering Tab Clip. Socket may be stabilized by soldering (Reflow) in these 4 areas. : No conduits within this hatched area. : These holes are only necessary for use with positioning pins. 336 SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Production Sockets

(without positioning pins) ICP-080-6 IC149-080-131-B5 (with positioning pins)

0 12.0 12mm x 12mm 2.80 max. 13 x 13 ±0.2 See Package Details 0.15 ±0.05 2.

05 Detail for Plastic Package 0.5 0.20 ±0.

ICP-080-6 IC149-080-130-B5 (with positioning pins) ICP-080-6 Notes: : Metal

Socket may be stabilized by soldering (Reflow) in these 4 areas.

7 QFP - Socket and emulation -Adapter 0.5 mm pitch 80 Pins - QFP/TQFP (20 x 20 pins) 12mm x 12mm IC B5 (without positioning pins) ICP IC B5 (with positioning pins) ICP mm pitch 80 Pins - QFP/TQFP (20 x 20 pins) 14.0± mm x 12mm 2.80 max. 13 x 13 ±0.2 See Package Details 0.15 ± ± ±0.05 Detail for Plastic Package ±0.05 Detail for Ceramic Package IC B5 (without positioning pins) ICP IC B5 (with positioning pins) ICP Notes: : Metal soldering Tab Clip. Socket may be stabilized by soldering (Reflow) in these 4 areas. : No conduits within this hatched area. : These holes are only necessary for use with positioning pins. N4: The Socket may be glued to the PC Board within this area. SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Production Sockets 337

8 QFP - Socket and emulation -Adapter 0.5 mm pitch 100 Pins - QFP/TQFP100 (25 x 25 pins) ± mm x 14mm 20, max Info: Socket height = 13.20mm IC B5 (without positioning pins) IC B51 (without SMT fixing metal) ICP IC B5 (with positioning pins) IC B51 (without SMT fixing metal) ICP Pins - QFP/TQFP100 (25 x 25 pins) 0.50 mm pitch ± mm x 14mm 2.9 max. 20, x Info: Socket height = 15.40mm IC B5 (without positioning pins) IC B51 (without SMT fixing metal) ICP IC B5 (with positioning pins) IC B5 (without SMT fixing metal) ICP Notes: : Metal soldering Tab Clip. Socket may be stabilized by soldering (Reflow) in these 4 areas. : These holes are only necessary for use with positioning pins. : No conduits within this hatched area. 338 SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Production Sockets

9 QFP - Socket and emulation -Adapter 0.5 mm pitch 144 Pins - QFP/TQFP144 (36 x 36 pins) 20mm x 20mm IC B5 (without positioning pins) IC B51 (without SMT fixing metal) ICP IC B5 (with positioning pins) ICP Pins - QFP/TQFP160 (40 x 40 pins) 0.5 mm pitch 24mm x 24mm IC B5 (without positioning pins) IC B51 (without SMT fixing metal) Not available for this socket Notes: : Metal soldering Tab Clip. Socket may be stabilized by soldering (Reflow) in these 4 areas. : These holes are only necessary for use with positioning pins. : No conduits within this hatched area. SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Production Sockets 339

0.5 mm pitch 176 Pins - QFP/TQFP176 (44 x 44 pins) 0.22 ±0.05 0.60 ±0.15 0.14 ±0.

10 0.5 mm pitch 176 Pins - QFP/TQFP176 (44 x 44 pins) 0.22 ± ± ±0.05 IC B5 (without positioning pins) Not available for this socket IC B5 (with positioning pins) Not available for this socket 0.5 mm pitch 208 Pins - QFP/TQFP208 (52 x 52 pins) IC B5 (without positioning pins) Not available for this socket IC B5 (with positioning pins) Not available for this socket Notes: : Metal soldering Tab Clip. Socket may be stabilized by soldering (Reflow) in these 4 areas. : These holes are only necessary for use with positioning pins. 340 SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Production Sockets

11 240 Pins - QFP/TQFP240 (60 x 60 pins) 0.5 mm pitch IC B5 (without positioning pins) Not available for this socket IC B5 (with positioning pins) Not available for this socket SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Production Sockets 341

CLICK HERE TO GO BACK TO PART NUMBER OVERVIEW. QFP/TQFP - 64 Pins (10x10) 0.5mm pitch. Detail C. Detail B

CLICK HERE TO GO BACK TO PART NUMBER OVERVIEW. QFP/TQFP - 64 Pins (10x10) 0.5mm pitch. Detail C. Detail B QFP/TQFP - 64 Pins (10x10) 0.5mm pitch Withstanding Voltage: 100V eff Solvent Durability: Freon Part Number (Details) IC149-064 - *69 - B5 B5 = Au over Ni Not available Detail C 10mm x 10mm N1 Detail B