TY3085/6 SERIES. 3.00mm Pitch Wire To Wire Connector. Specification. Circuits. Kingmate
|
|
- Philip Barton
- 5 years ago
- Views:
Transcription
1 3.00mm Pitch Wire To Wire Connector Assembly Layout Right Angle Type DIP-Type Specification Circuits Pitch Current Rating Voltage Rating Contact Resistance Withstand Voltage Insulation Resistance Temperature Range Applicable Wire Range Applicable P.C.B Thickness Panel Layout 1x0-1x, x01 - x 3.00mm 5A AC/DC 50V AC/DC 10mΩ MAX. 1,500V AC/minute 1,000MΩ MIN. -5 C C AWG # - # mm (MAX.) Dimension and Order Information Circuits x1 x x3 x x5 x x7 x8 A B x x x x TY3085 * - * x NP * 1 3 TY308 * - * x NP * - * Part No. TY3085, Connection Type: HNO : Terminal Socket WNV : Vertical WNR : Right Angle Mount Type W:With Ears F:With Boss S:SMT Type SE:With Shield(DIP) 3 Number of Contacts: 1xNP : Single row xnp : Dual row 5 Product Color Blank : As Specified C* : Color of number Note:Color of number(0-white, 1-Black, -Brown, 3-Red, -Orange, 5-Yellow, -Green, 7-Blue, 8-Purple, 9-Grey).
2 3.00mm Pitch Wire To Wire Connector Terminal Use with: Female TY3085TP*-* For TY3085 Series Male Houing less than PIN. TY3085TP*-*L For TY3085 Series Male Houing above (inclusive) PIN. CONTACT INFORMATION Part No. Wire Range Insulation O.D. C D Material Finish Q'ty/Reel TY3085TPL-* AWG #-#30 1.0mm(MAX.) Phosphor bronze See note TY3085TPH-* AWG #-# 1.80mm(MAX.) ,000 pcs TY3085TPL-*L AWG#~#30 1.0mm(MAX.) Phosphor bronze See note TY3085TPH-*L AWG#~# 1.80mm(MAX.) ,000 pcs Note: For this product in a different specification please contact KM for more information Male Use with: TY308 Series Female Housing Terminal CONTACT INFORMATION Part No. Wire Range Insulation O.D. C D Material Finish Q'ty/Reel TY308TPL-* AWG #-#30 1.0mm(MAX.) TY308TPH-* AWG #-# Phosphor bronze See note 1.80mm(MAX.) ,000 pcs Note: For this product in a different specification please contact KM for more information
3 3.00mm Pitch Wire To Wire Connector Housing Male Single Row Material: Thermoplastic 9V-0 Use with: TY3085 Crimp Terminal Mates with : TY308 Series Single Row Housing or Housing Female Single Row Material: Thermoplastic 9V-0 Use with: TY308 Crimp Terminal Mates with : TY3085 Series Single Row Housing TY3085HNO-1x TY3085HNO-1x TY3085HNO-1x TY3085HNO-1x TY3085HNO-1x TY3085HNO-1x TY3085HNO-1x TY3085HNO-1x TY3085HNO-1x TY3085HNO-1x TY3085HNO-1x TY308HNO-1x0 TY308HNO-1x TY308HNO-1x0 TY308HNO-1x05 TY308HNO-1x0 TY308HNO-1x07 TY308HNO-1x TY308HNO-1x TY308HNO-1x TY308HNO-1x11 TY308HNO-1x
4 3.00mm Pitch Wire To Wire Connector Housing Male Dual Row Available Number of Circuits: x01 - x Material: Thermoplastic 9V-0 Use with: TY3085 Crimp Terminal Mates with : TY308 Series Dual Row Housing and Housing Female Dual Row Available Number of Circuits: x01 - x Material: Thermoplastic 9V-0 Use with: TY308 Crimp Terminal Mates with : TY3085 Series Dual Row Housing TY3085HNO-x TY3085HNO-x0 TY3085HNO-x TY3085HNO-x TY3085HNO-x TY3085HNO-x TY3085HNO-x TY3085HNO-x TY3085HNO-x TY3085HNO-x TY3085HNO-x TY3085HNO-x TY308HNO-x TY308HNO-x TY308HNO-x TY308HNO-x TY308HNO-x TY308HNO-x TY308HNO-x TY308HNO-x TY308HNO-x TY308HNO-x TY308HNO-x TY308HNO-x
5 3.00mm Pitch Wire To Wire Connector Housing Female Single Row Material: Thermoplastic 9V-0 Use with: TY308 Crimp Terminal Mates with : TY3085 Series Single Row Housing Housing Female Dual Row Available Number of Circuits: x01 - x Material: Thermoplastic 9V-0 Use with: TY308 Crimp Terminal Mates with : TY3085 Series Dual Row Housing 3 TY308HNO-1x0W TY308HNO-1x03W TY308HNO-1x0W TY308HNO-1x05W TY308HNO-1x0W TY308HNO-1x07W TY308HNO-1x08W TY308HNO-1x09W TY308HNO-1x10W TY308HNO-1x11W TY308HNO-1xW TY308HNO-x01W TY308HNO-x0W TY308HNO-x03W TY308HNO-x0W TY308HNO-x05W TY308HNO-x0W TY308HNO-x07W TY308HNO-x08W TY308HNO-x09W TY308HNO-x10W TY308HNO-x11W TY308HNO-xW
6 Vertical Single Row Vertical Dual Row Available Number of Circuits: x01- x Dimension And Order Information TY308WNV-1x0-* TY308WNV-1x03-*.00.5 TY308WNV-1x0-* TY308WNV-1x05-*.00.5 TY308WNV-1x0-* TY308WNV-1x07-* TY308WNV-1x08-* TY308WNV-1x09-* TY308WNV-1x10-* TY308WNV-1x11-* TY308WNV-1x-* TY308WNV-x01-* TY308WNV-x0-* TY308WNV-x03-* TY308WNV-x0-* TY308WNV-x05-* TY308WNV-x0-* TY308WNV-x07-*.00.5 TY308WNV-x08-* TY308WNV-x09-* TY308WNV-x10-* TY308WNV-x11-* TY308WNV-x-*
7 Right Angle Single Row F-TYPE Right Angle Dual Row F-TYPE Available Number of Circuits: x01 - x TY308WNR-1x0F-*-* TY308WNR-1x03F-*-*.00.5 TY308WNR-1x0F-*-* TY308WNR-1x05F-*-* TY308WNR-1x0F-*-* TY308WNR-1x07F-*-*.00.5 TY308WNR-1x08F-*-* TY308WNR-1x09F-*-* TY308WNR-1x10F-*-* TY308WNR-1x11F-*-* TY308WNR-1xF-*-* TY308WNR-x01F-*-* --.5 TY308WNR-x0F-*-* TY308WNR-x03F-*-* TY308WNR-x0F-*-* TY308WNR-x05F-*-*.00.5 TY308WNR-x0F-*-* TY308WNR-x07F-*-*.00.5 TY308WNR-x08F-*-* TY308WNR-x09F-*-* TY308WNR-x10F-*-* TY308WNR-x11F-*-* TY308WNR-xF-*-*
8 Vertical Single Row SMT E-TYPE Vertical Single Row SMT-TYPE TY308WNV-1x0SE TY308WNV-1x03SE.00.5 TY308WNV-1x0SE TY308WNV-1x05SE.00.5 TY308WNV-1x0SE TY308WNV-1x07SE TY308WNV-1x08SE TY308WNV-1x09SE TY308WNV-1x10SE TY308WNV-1x11SE TY308WNV-1xSE TY308WNV-1x0S TY308WNV-1x03S.00.5 TY308WNV-1x0S TY308WNV-1x05S.00.5 TY308WNV-1x0S TY308WNV-1x07S TY308WNV-1x08S TY308WNV-1x09S TY308WNV-1x10S TY308WNV-1x11S TY308WNV-1xS
9 Right Angle Single Row SMT E-TYPE Right Angle Single Row SMT TYPE TY308WNR-1x0SE TY308WNR-1x03SE.00.5 TY308WNR-1x0SE TY308WNR-1x05SE.00.5 TY308WNR-1x0SE TY308WNR-1x07SE TY308WNR-1x08SE TY308WNR-1x09SE TY308WNR-1x10SE TY308WNR-1x11SE TY308WNR-1xSE TY308WNR-1x0S TY308WNR-1x03S TY308WNR-1x0S TY308WNR-1x05S.00.5 TY308WNR-1x0S TY308WNR-1x07S TY308WNR-1x08S TY308WNR-1x09S TY308WNR-1x10S TY308WNR-1x11S TY308WNR-1xS
10 Vertical Dual Row SMT E-Type Available Number of Circuits: x01 - x Vertical Dual Row SMT-Type Available Number of Circuits: x01 - x TY308WNV-x01SE --.5 TY308WNV-x0SE TY308WNV-x03SE TY308WNV-x0SE TY308WNV-x05SE.00.5 TY308WNV-x0SE TY308WNV-x07SE.00.5 TY308WNV-x08SE TY308WNV-x09SE TY308WNV-x10SE TY308WNV-x11SE TY308WNV-xSE TY308WNV-x01S TY308WNV-x0S TY308WNV-x03S TY308WNV-x0S TY308WNV-x05S.00.5 TY308WNV-x0S TY308WNV-x07S.00.5 TY308WNV-x08S TY308WNV-x09S TY308WNV-x10S TY308WNV-x11S TY308WNV-xS
11 Right Angle Dual Row SMT E-Type Available Number of Circuits: x01 - x Right Angle Dual Row SMT Type Available Number of Circuits: x01 - x Contact : 0.mm(.05") Square Pin Copper Alloys, TY308WNR-x01SE --.5 TY308WNR-x0SE TY308WNR-x03SE TY308WNR-x0SE TY308WNR-x05SE TY308WNR-x0SE TY308WNR-x07SE.00.5 TY308WNR-x08SE TY308WNR-x09SE TY308WNR-x10SE TY308WNR-x11SE TY308WNR-xSE TY308WNR-x01S --.5 TY308WNR-x0S TY308WNR-x03S TY308WNR-x0S TY308WNR-x05S.00.5 TY308WNR-x0S TY308WNR-x07S.00.5 TY308WNR-x08S TY308WNR-x09S TY308WNR-x10S TY308WNR-x11S TY308WNR-xS
Specifications A2547 SERIES. Standards E E326732
A2547 SERIES 2.54mm pitch wire to board and wire to wire connector Specifications Current rating:3a AC,DC Voltage rating:250v AC,DC Temperature range:-40 C~+105 C Contact resistance:20mω Max. Insulation
More informationM20 Connectors Specification
Specification mm pitch, with 0.64mm square male pin connection system. mm (.100") PITCH oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Male: Finish: Electrical
More informationM22 Connectors Specification
Specification 2mm pitch, with 0.5mm square male pin connection system. oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Jumper socket: Male: Finish: Electrical
More informationCOMPONENT SPECIFICATION M20 SERIES CONNECTORS AUGUST 2016 CONTENTS: SECTION TITLE PAGE. 1 Description of Connector and Intended Application 2
AUGUST 2016 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Gauges 5 APPENDICES NOTES: 1. Third angle projection
More informationXA CONNECTOR. 1Certified LR R
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Specifications Current rating: 3 A AC DC (AWG #22, #20) Voltage rating: 250 V AC DC Temperature range: -25 C to +85 C (including
More informationINSULATION DISPLACEMENT IDC. PITCH d : 1.27X1.27mm, b : 2.00X2.00mm, a : 2.54X2.54mm IDCR IDC RIBBON CONNECTOR IDB IDC D-SUB CONNECTOR
INSULATION DISPLACEMENT PITCH d : 1.271.27mm, b : 2.0.00mm, a : 2.542.54mm R RIBBON CONNECTOR IDB D-SUB CONNECTOR CABLE ASSEMBLY TABLE OF CONTENTS PAGE d001 1 b001 2 a01 3 a0 4 a003 5 a1 6 R001 7 IDB100
More information2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR R PC board layout (viewed from component side) and Assembly layout
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Secure locking device Solder crack preventive material Low insertion force Insertion guide mechanism Applicable to automatic board
More informationCLICK HERE TO GO BACK TO PART NUMBER OVERVIEW. QFP/TQFP - 64 Pins (10x10) 0.5mm pitch. Detail C. Detail B
QFP/TQFP - 64 Pins (10x10) 0.5mm pitch Withstanding Voltage: 100V eff Solvent Durability: Freon Part Number (Details) IC149-064 - *69 - B5 B5 = Au over Ni Not available Detail C 10mm x 10mm N1 Detail B
More informationYL CONNECTOR. 1Certified LR R Specifications. Standards. 4.5mm pitch/disconnectable Crimp style Wire-to-wire connectors
.mm pitch/disconnectable Crimp style Wire-to-wire connectors Panel lock Inner lock lance Specifications Current rating: 0A AC, DC max. (A when retainers are mounted) Voltage rating: 00V AC, DC max. Temperature
More informationSetting Standards Connectors M 16
Setting Standards Connectors M 16 inclusive 15 Product Overview 16 Housings page 18 Inserts page 22 Accessories page 29 Technical Data M 16 Control Signal Connectors Mechanical Data Housing Materials and
More informationGecko Connectors Introduction
Gecko onnectors Introduction Gecko is a mm pitch High-Reliability connector range from Harwin. Improving on the popular 2mm pitch Datamate series, and harnessing the modern technology of micro-machining,
More informationBy using this Adapter a connection between Socket and Emulator or programming device can be easily achieved.
Series Introduction QFP-Production Use Socket and Emulation-Adapter YAMAICHI's IC149-Series is available in many different formats, from 44 pins to 240 pins. It is designed to fit most of the common semiconductors
More informationYL CONNECTOR. Disconnectable Crimp style Wire-to-wire connectors. Features. Specifications. Standards. 4.5mm
Crimp.mm (.") pitch Disconnectable Crimp style Wiretowire connectors Features The retainer features added protection against noninsertion or disconnection. Housing lance The resilient plastic housing lances
More informationEN2 SERIES SEALED CONNECTORS
FEATURES & BENEFITS Sealed to IP68, NEMA 250 (6P) (when mated) Available in standard or winged coupling ring Patented grommet and o-ring free design Solder/crimp and PC contact options APPLICATIONS Any
More information2mm Pitch 2 Piece Battery Connector. Horizontal/Vertical
FEATURES Low profile battery connectors (GF21/GF22/GF31 only) with 2.6mm (.12") height. 2 piece type with a highly reliable connection Sequence connection (FMLB : First Mate Last Break, 1 pin only) is
More informationSpring Loaded Contacts
Spring Loaded Contacts Contents ATE Spring Probes Specifications One Part Probes Two Part Probes Spring Loaded Contacts Specifications Spring Loaded Contact Connectors Single Spring Loaded Contacts SMT
More informationsealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
More informationVersaBlade Wire-to-Wire Connection System
VersaBlade Wire-to-Wire Connection System VersaBlade Wire-to-Wire Connection System For Home Appliance Contents 0 Product Overview 05 Feature and Benefits 0 Specifications 07 Mating Structure Ordering
More informationPRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS
BOARD/WIRE-TO-BOARD CONNECTORS PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS Minitek Headers for Pin-in-Paste Processes OVERVIEW Minitek is FCI s brand for board-to-board and wire/cableto-board connectors
More information1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
Features 1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies DF65 Series 1. Enhanced contact reliability and lock structure The unique locking structure reinforces the engagement between
More informationPRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
More information.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
Introduction: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements. vailable in Single,
More information5mm Pitch Miniature Potting Connectors for Secondary Power Supply
5mm Pitch Miniature Potting Connectors for Secondary Power Supply DF5 Series Single row type Features 1. Potting Product This connector is capable of potting 9mm maximum, and 22.5mm mounting height is
More informationAirBorn 4321 AirBorn Drive Addison, TX United States
AirBorn Series Body Size (number of contacts) Contact Type Hardware Type JULY 2009 AirBorn has been manufacturing high reliability interconnect systems for more than 45 years with leading-edge, innovative
More informationPRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
1.0 SCOPE 1 of 8 E This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of the latest
More information1.25mm Pitch Miniature Crimping Connector (UL Listed)
1.25mm Pitch Miniature Crimping Connector (UL Listed) DF13 Series Type Mounting Type Mounting Height(h) Features 1. Miniature Size Designed in the low profile at mounting height 5.8mm. (SMT mounting straight
More informationAmphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications
Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. D 3.00 to 7.92mm (.118 to.312") Pitch FEATURES AND SPECIFICATIONS Features
More informationRated current. Dielectric withstanding voltage
mm Pitch Connectors HDR series Interface Connectors Outline HDR series connectors are very small surface mount (SMT) interface connectors with their contacts arranged at a pitch of mm, designed for the
More informationPoke-Home: Inverted Thru Board AWG: WTB INTER CONNECT FEATURES AND BENEFITS APPLICATIONS ELECTRICAL MECHANICAL ENVIRONMENTAL
AVX continues to develop innovative connectors for the industrial electronics market that provide significant benefits over existing, outdated connector solutions. Listening to the design engineering community,
More informationRWZ CONNECTOR. 1Certified LR Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
Disconnectable Crimp style Wire-to-wire connectors In unit connection, this RWZ connector is a hybrid type double row drawer connector with combined signal and power supply circuits, absorbs misalignment
More informationD-subminiature Metal Shell Crimp and Poke, Right-Angle and Vertical PCB D*U Series
Crimp and Poke, Right-Angle and Vertical PCB Offered in 9, 15, 25, 37, and 50 position plugs and sockets (except right-angle PCB connectors- 9, 15, and 25 positions). FEATURES Available with gold flash
More informationSB 50 Connectors - up to 120 amps
Connectors - up to 120 amps Based off the design pioneered by Anderson in 1953, APP s two pole SB connectors set the standard for DC power distribution and battery connections. connectors feature a one
More information2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features Correspond to Board Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header In-line
More informationE REF. wire to wire wire to board. CHANGJIANG CONNECTORS TEL: FAX:
Specifications Current rating:3 C,DC Voltage rating:250v C,DC Temperature range:-40 C~+105 C Contact resistance:10mωmax. Insulation resistance:1000mωmin. Withstanding voltage:800v C/minute *Compliant with
More informationSINGLE POLE SOCKETS - SOLDER MOUNT
SINGLE POLE SOCKETS - SOLDER MOUNT 450 - XXXX - XX - XX - 00 Body Brass Copper* Spring Beryllium Copper (Heat Treated) Dash Body Spring RoHS -03 Gold over Nickel Gold over Nickel -04 Electro-Tin Electro-Tin
More informationBroadband performance with low reflection DC to 4 GHz provides low cost connector combined with high quality.
Amphenol RF 36 Connectors Description The name derives from SubMiniature B (the second subminiature design). Developed in the 1960 s, this sub miniature interface has snap-on coupling. Amphenol s connectors
More informationHB01 Series Waterproof Cable-to-Cable Connector
v1.0 HB01 Series Waterproof Cable-to-Cable Connector Product Information Module Japan Aviation Electronics Industry, Ltd. Proprietary. Copyright 2016, Japan Aviation Electronics Industry, Ltd. JAE HB01
More information1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies
NEW 1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies DF65 Series (UL Pending) Lock structure and operation Socket Header Latch Latches are deflected slightly during mating. Features
More information1/4" and 3.5 mm Phone Plugs
N Y S P r o d u c t G u i d e P l u g s 1/4" and 3.5 mm Phone Plugs NYS 204 NYS 208 NYS 224G NYS 225B Commercial 1/4" plugs and adapters All connectors acc. EIA RS-453 / IEC 60603-11 Short and long turned
More information2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. EPower Connectors 4.20mm (.165") Pitch Mini-Fit Plus Terminal 46083 Crimp,
More informationSCA.1, SCA. 2 INTERFACE CONNECTOR
SCA.1, SCA. 2 INTERFACE CONNECTOR 240 SERIES (SCA) FEATURES Half pitch connector conformed to SCA system (80 pins). Add mating guide and ESD protection to do plug-in safety and reliability (They are newly
More informationPRODUCT SPECIFICATION
2.54mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 2.54mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
More information2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
More information10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cableto-board and cable-to-cable applications with protection up to IP65 / IP67. At the same time, applications up to 2.5
More informationHAMBURG INDUSTRIES CO., LTD.
SPECIFICATION OF IC CARD ACCEPTOR Model No.: ICA-607 Revision: 1.0 Issue Date: Oct.15, 2001 HAMBURG INDUSTRIES CO., LTD. 6FL., No.12, Lane 270, Sec. 3, Pei Shen Rd., Shen Keng Hsiang, Taipei Hsien, Taiwan
More informationPRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
More informationPRODUCT SPECIFICATION
2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
More informationCommercial Micro-D Subminiature I/O Products
Subminiature I/O Products requiring the density of a microminiature connector Designed In: Inches Packaging: Tube Mates With: 83421, 83422, 83424 PCB Thickness: 1.60mm (.062 ) Lead Free Process Capability:
More information.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
dam Technologies, Inc. INTRODUCTION: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements.
More informationMINI CIRCULAR DIN PLUGS
MINI CIRCULAR DIN PLUGS 7000 SERIES SERIES. Plug for Cable Solder! Available in 3, 4, 5, 6, 7, 8 and 9 circuits! Voltage rating: 50V AC/DC! With inner metal cover, strain relief cap and plastic hood! Current
More informationPRODUCT SPECIFICATION
0.8x1.2 mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 0.8x1.2mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug
More informationPowerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
More informationSBE 320 / SBX 350 Connectors - up to 350 Amps
Connectors - up to 350 Amps ORDERING INFORMATION SBX and SBE connectors can integrate up to 8 auxiliary power / signal contacts along with the two primary power circuits. Sequencing within auxiliary positions
More information.093 [2.36] Commercial Pin and Socket Connectors
.09 [.] Commercial Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold
More informationCALL (512 ) x6400
The AirBorn stackable compliant connector family is one of AirBorn s solutions for high-density, board-to-board stacking applications. This connector family is available in 0.075 contact spacing and 100
More informationPowerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
More informationVaricon. Contents. The Varicon Range Introduction to Varicon Tools Page 26. Series 7008 Page 6. Series 7022 Page 8. Series 8020 Page 27
AVX Varicon Contents The Varicon Range............................................................ 2 Introduction to Varicon........................................................ 3 Series 7008 Page 6
More informationElectrical dielectric withstanding voltage. sea level Vrms Vrms m Vrms Vrms
Applications Mechanical and electrical interface between on-board civil avionics equipments and racks Standards Arinc 600 Characteristics Mechanical material finish aluminum alodine 00 shells alloy to
More informationHEADER & HOUSING SYSTEMS
dam Technologies, Inc. HEDER & HOUSING SYSTEMS.8mm, 1mm, 1.25mm, 1.5mm, 2mm & 2.5mm INTRODUTION: dam Tech 2H & 2SH Series of multiple pitch Headers and Housings are a matched set of rimp Wire Housings
More informationAVX Wire-to-Board Connectors
AVX Wire-to-Board Connectors www.avx.com Version 11.11 Table of Contents INSULATION DISPLACEMENT CONNECTORS (IDC) WIRE TO BOARD (WTB) DISCRETE WIRE IDC SERIES 9175...................................................................................
More information2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features 1. Correspond to Board Design in Wide Variation Crimp Socket Receptacle Pin Header (1) Low profile
More informationPRODUCT SPECIFICATION
MINI-FIT SR. SERIES 1.0 SCOPE This specification covers the 10.00 mm / (.394 in.) centerline tin and gold, silver plated connector series, single and dual row versions in wire to wire and wire to printed
More informationPowerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
More informationVaricon. Contents. The Varicon Range Introduction to Varicon Tools Page 26. Series 7008 Page 6. Series 7022 Page 8. Series 8020 Page 27
AVX Varicon Contents The Varicon Range............................................................ 2 Introduction to Varicon........................................................ 3 Series 7008 Page 6
More informationStandard I/O, 15 Position
The 9157 series was specifically designed for portable equipment. AVX now offers this two-part system as a standard product. The fixed SMT socket is designed to be housed within the confined dimensional
More informationSERIES SMB SUBMINIATURE CONNECTORS
SERIES SMB SUBMINIATURE CONNECTORS DESCRIPTION CONTENTS PAGE The HUBER+SUHNER subminiature connectors Series SMB, SMC, SMS have the same basic design. They only differ with regard to their coupling mechanism.
More informationAmphenol. Circular. Connectors C 16-1 / C Circular Connectors. Amphenol-Tuchel Electronics
Amphenol C 1-1 / C 1- Circular Circular Connectors Connectors Amphenol-Tuchel Electronics C 1-1 Overview No. of contacts + PE + PE Termination screw solder Wire gauge Rated insulation voltage Current carrying
More information2.54mm Pitch Bottom Entry Type Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationPoke-Home: Horizontal AWG: WTB INTER CONNECT APPLICATIONS FEATURES AND BENEFITS ELECTRICAL MECHANICAL ENVIRONMENTAL HOW TO ORDER 00X
The new 9276 series connector provides a quick and reliable wire-toboard termination in a sleek 2.5mm pitch SMT package for a broad range of industrial and commercial markets. With almost every product
More informationMX150L tm INDUSTRIAL SEALED CONNECTOR SYSTEM
MX150L tm INDUSTRIAL SEALED CONNECTOR SYSTEM The MX150L Industrial Sealed Connector System is IP67 rated and conforms to UL 1977, but it is NOT suitable for automotive applications with requirements such
More informationRemote Input/Output Terminal System (RITS) Connectors
Product Facts Termination by generic tools Small.0 mm [.079] centerline connectors Two contact points structure provides for high contact reliability Housing colors indicate applicable wire range omponent
More informationCopper Compression Lugs Conductor Size #8
A TYPE Conductor Size #8 Overall Catalog Wire Alt Bolt Overall Die Number Size Wire Size Size Thickness Color Code -8-10 8 AWG 8 FLEX #8-#10 0.579 0.445 0.071 1.201 RED 0.185 0.256-8-14 8 AWG 8 FLEX 1/4
More information2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
2mm Double-Row Connector (Product Compliant to UL/CSA Standard) DF11 Series Features 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
More informationJFA CONNECTOR J1000 SERIES
JFA CONNECTOR J1000 SERIES 2.2mm pitcth/disconnectable Crimp style connectors(wire-to-board/wire-to-wire) Specifications Current rating: Circuits 22 2 0 #1.4 5.5 5.5 4.7 4.0.9.. # 5.4 4. 4..9.4..0.0 Wire
More informationELECTRICAL CONNECTIONS
ELECTRICAL CONNECTIONS Lesson 13 EET 150 Electrical Connections Learning Objectives In this lesson you will: see different methods of making electrical connections. learn a procedure for making soldered
More informationSmall-sized, plastic type, push-pull lock connectors
Small-sized, plastic type, push-pull lock connectors RP17 Series Product Specifications Ratings Rated current Rated voltage Features 1. Superior mating operability Secure mating and easy unmating is achieved
More informationConnector MACHINE PIN SOCKET EMS SERIES FEATURES SPECIFICATIONS KINDS OF BASE
MACHINE PIN SOCKET EMS SERIES Connector FEATURES Funnel shaped four-fingered and six-fingered contacts provide easy IC insertion and withdrawal, high reliability Gold plated contact to ensure low contact
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPEIFIATIONS Features and Benefits Board-mounting pegs provide
More informationSBE 160 / SBX 175 ORDERING INFORMATION SECTION 3. Touch Safe Interface Minimizes potential contact with live circuits per IEC & IEC 60529
Connectors - up to 175 Amps SBX and SBE connectors can integrate up to 8 auxiliary power / signal contacts along with the two primary power circuits. SBE connectors feature an IEC 60950 touch safe housing
More informationJDX Hybrid Mixed Power & Signal
Integrated Mixed Power Backshell and Signal Fire Waterproof Connector The JDX mixed power and signal connector offers the ability to integrate 2 or 3 power contacts with 6 to 8 signal contacts in one connector
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Gauge Size. Code Accepted Max Wire Gauge Insulation AWG Solid or Stranded
AVX continues to develop innovative connectors for the industrial electronics market that provide significant benefits over existing, outdated connector solutions. Listening to the design engineering community,
More information1.27mm Pitch Connector
1.27mm Pitch Connector FX1 Series DIN duplex density mount has been achieved. (DIN 96 contacts and FX1 192 (96x2) Photo 1 Features 1. High density and space saved-din Duplex Mount Achieved The alignment
More informationSECTION 14. DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214
SECTION 14 14 DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214 Contents DIN 1.0/2.3 Introduction... 14-4 Interface... 14-4 Characteristics Eco... 14-5 Plugs Eco... 14-6 Jacks Eco... 14-6
More information2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves the low profile.. Insulation Displacement Area Protected by
More informationRR-HR. Simplify your cable assemblies REAR RELEASE CRIMP CONNECTORS RR-HR / E11. D-Sub connectors - Stamped and Formed Contacts.
RR-HR D-Sub connectors - Stamped and Formed Contacts REAR RELEASE CRIMP CONNECTORS CHARACTERISTICS Specifications Connectors according to MIL C24308 Materials and Platings Shells Tinned steel with or without
More informationELCO Series 8005/8015 A KYOCERA GROUP COMPANY
Series 8005/8015 A KYOCERA GROUP COMPANY Series 8005 Position Miniature IDC Wire to Board Connector Series 8005 is a super compact pin Wire to Board connector designed for high density mounting. This is
More informationSSL - Discrete Wire IDC Contact & Cap
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
More informationPC BOARD CONNECTORS 720M SERIES (CRIMP TYPE CONNECTORS)
PC BOARD CONNECTORS 720M SERIES (CRIMP TYPE CONNECTORS) FEATURES The 720 series connectors (crimp type connectors) are designed for a wide range of uses. 1-row and 2-row types are available to allow various
More information10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cable-to-board and cable-to-cable applications with protection up to IP 65 / IP 67. At the same time, applications up to
More informationJULY 2014 SECTION TITLE PAGE. 1 Description of Connectors and Intended Applications 2. 2 Marking of Connector and/or Package 2.
M80 & M83 SERIES RECTANGULAR CONNECTORS JULY 204 SECTION TITLE PAGE Description of Connectors and Intended Applications 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix Contact Orientations
More information[ 21.3 ] 0.84 A [ 13.0 ] 0.51
Connectors - up to 175 Amps SBX and SBE connectors can integrate up to 8 auxiliary power / signal contacts along with the two primary power circuits. SBE connectors feature an IEC 60950 touch safe housing
More informationDiscrete Wire IDC Contact & Cap
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
More informationSMB Connectors. RF Coax Connectors. Product Facts
SMB Connectors Product Facts SMB offers snap-fit coupling for quick connect/disconnect Choice of Commercial or High Rel Connectors 50 and 75 Ω MIL-Type connectors available Straight plugs and jacks are
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 0XX. Wire Gauge Size. Code Accepted Wire Cap Code Wire Gauge Insulation Pages 6-7
The 917X series of surface mount Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from
More informationCover headline Cover headline D-Subminiature Product Overview
Cover headline Cover headline D-Subminiature Product Overview D-Subminiature Connectors Key Markets & Applications Invented by Cannon engineers in 1952 for aircraft radio systems, the D-Subminiature was
More informationHan High Temp. Description. Design overview. Han High Temp connectors remain robust and reliable for their entire lifespan!
Han High Temp Description Han High Temp is a new product series that is based on our well-established Han B and Han E series. We used high-quality materials with wide temperature ranges to produce connectors
More informationCover headline Cover headline D-Subminiature Product Overview
Cover headline Cover headline D-Subminiature Product Overview D-Subminiature Connectors D*M, D*MM, D*MA with NM, NMB option connectors are used when non magnetic characteristics are required. Hermetic
More informationAmphenol RF. Mini-BNC Mini-BNC Connectors. Mini-BNC. Description. Features/Benefits. Applications
Amphenol RF 100 Connectors Description Amphenol RF introduces the new generation of quality BNC connectors for the telecommunication and broadband applications for higher connector densities while preserving
More information