INSULATION DISPLACEMENT IDC. PITCH d : 1.27X1.27mm, b : 2.00X2.00mm, a : 2.54X2.54mm IDCR IDC RIBBON CONNECTOR IDB IDC D-SUB CONNECTOR
|
|
|
- Dennis Maxwell
- 5 years ago
- Views:
Transcription
1 INSULATION DISPLACEMENT PITCH d : mm, b : mm, a : mm R RIBBON CONNECTOR IDB D-SUB CONNECTOR CABLE ASSEMBLY
2 TABLE OF CONTENTS PAGE d001 1 b001 2 a01 3 a0 4 a003 5 a1 6 R001 7 IDB100 8 CABLE ASSEMBLY 9
3 1.27x1.27 mm CONNECTOR d001-female d 001 F Gft CONNECTOR 001 PITCH 1.27x1.27 mm F: FEMALE NO. OF PINS PER ROW NO. OF ROW KEY OPTION K: WITH KEY BLANK: WITHOUT KEY CURRENT RATING : 0.5 AMPS. INSULATOR RESISTANCE : 5000 OHM MIN. DIELECTRIC WITHSTANDING : AC 250 V. OPERATING TEMPERATURE : - 40 o C ~ o C CONTACT MATERIAL : BRASS / PHOSPHOR BRONZE INSULATOR MATERIAL : P.B.T +15% GLASS FIBER ( UL94V-0 ) FINISH : GOLD FLASH ON CONTACT, FA : FA : FA :
4 2.00x2.00 mm CONNECTOR b001-male KINKED PINS b001-female b001-female b 001 Gft CONNECTOR 001 PITCH 2.00x2.00 mm M: MALE F: FEMALE NO. OF ROW NO. OF PINS PER ROW KEY OPTION (ONLY FEMALE) K: WITH KEY BLANK: WITHOUT KEY OPTION (ONLY FEMALE) R: WITH BLANK: WITHOUT CURRENT RATING : 1 AMPS. INSULATOR RESISTANCE : 1000 OHM MIN. DIELECTRIC WITHSTANDING : AC 500 V. OPERATING TEMPERATURE : - 40 o C ~ o C CONTACT MATERIAL : BRASS / PHOSPHOR BRONZE INSULATOR MATERIAL : P.B.T + 30% GLASS FIBER ( UL94V-0 ) FINISH : GOLD FLASH ON CONTACT, FA : FA : FA :
5 2.54x2.54 mm CONNECTOR a001-female KEY OPTION a001-female KINKED PINS a001-male MATING a 01 Gft CONNECTOR PITCH 2.54x2.54 mm (ONLY FEMALE) 001: BODY COLOR = BLACK 011: BODY COLOR = GRAY F: FEMALE M: MALE Mk: MALE WITH KINKED PINS NO. OF PINS PER ROW NO. OF ROW KEY OPTION (ONLY FEMALE) K: WITH KEY BLANK: WITHOUT KEY COLOR OPTION G: GRAY BLANK: BLACK OPTION (ONLY FEMALE) R: WITH BLANK: WITHOUT CURRENT RATING : 1 AMPS. INSULATOR RESISTANCE : 1000 OHM MIN. DIELECTRIC WITHSTANDING : AC 500 V. OPERATING TEMPERATURE : - 40 o C ~ o C CONTACT MATERIAL : BRASS / PHOSPHOR BRONZE INSULATOR MATERIAL : P.B.T +30% GLASS FIBER( UL 94-V0 ) FINISH : GOLD FLASH ON CONTACT, FA : FA : FA :
6 2.54x2.54 mm CONNECTOR a0-mg-n a0-male a0-mg-e a0-male a 0 M Gft CONNECTOR 0 PITCH 2.54x2.54 mm M: MALE NO. OF PINS PER ROW NO. OF ROW BODY OPTION N: NORMAL TYPE E: EAR TYPE OPTION R: WITH BLANK: WITHOUT CURRENT RATING : 1 AMPS. INSULATOR RESISTANCE : 5000 OHM MIN. DIELECTRIC WITHSTANDING : AC 500 V. OPERATING TEMPERATURE : - 40 o C ~ o C CONTACT MATERIAL : BRASS INSULATOR MATERIAL : P.B.T + GLASS FIBER ( UL 94V-0 ) FINISH : GOLD FLASH ON CONTACT, FA : FA : FA :
7 2.54x2.54 mm CONNECTOR a003-mg-n a003-male a003-mg-e a003-male a 003 M Gft CONNECTOR 003 PITCH 2.54x2.54 mm M: MALE NO. OF ROW NO. OF PINS PER ROW BODY OPTION N: NORMAL TYPE E: EAR TYPE OPTION R: WITH BLANK: WITHOUT CURRENT RATING : 1 AMPS. INSULATOR RESISTANCE : 1000 OHM MIN. DIELECTRIC WITHSTANDING : AC 500 V. OPERATING TEMPERATURE : - 55 o C ~ o C CONTACT MATERIAL : BRASS INSULATOR MATERIAL : P.B.T + 30% GLASS FIBER ( UL 94V-0 ) FINISH : GOLD FLASH ON CONTACT, FA : FA : FA :
8 2.54x2.54 mm CONNECTOR a1-female GROUNDING CONNECTION: MASTER(BLACK): PIN NO. 2, 19, 22, 24, 26, 30, 40. SLAVE(GRAY): PIN NO. 2, 19, 22, 24, 26, 30, 40. SYSTEM(BLUE): PIN NO. 2, 19, 22, 24, 26, 30, 34, 40. ASSEMBLY OF THE PINS: MASTER(BLACK): FULL PIN SLAVE(GRAY): PULL PIN NO. 28. SYSTEM(BLUE): CUT PIN NO x2.54 mm CONNECTOR a1-fgft--m20 a 1 F 20 Gft K M20 CONNECTOR 1 PITCH 2.54x2.54 mm F: FEMALE NO. OF ROW WITH KEY OPTION R: WITH BLANK: WITHOUT NO. OF PINS PER ROW 20 COLOR OPTION 01: BLACK : BLUE 09: GRAY M20: MISS 20 PIN CURRENT RATING : 1 AMPS. INSULATOR RESISTANCE : 1000 OHM MIN. DIELECTRIC WITHSTANDING : AC 500 V. OPERATING TEMPERATURE : - 40 o C ~ o C. CONTACT MATERIAL : COPPER ALLOY. INSULATOR MATERIAL : P.B.T + 30% GLASS FIBER ( UL 94V-0 ) FINISH : GOLD FLASH ON CONTACT, FA : FA : FA :
9 RIBBON CONNECTOR R001-F500G R001-FEMALE R a 001 F 50 G RIBBON CONNECTOR 001 F: FEMALE NO. OF CONTACT 50 COLOR OPTION 01: BLACK : BLUE 09: GRAY OPTION R: WITH BLANK: WITHOUT Gf: GOLD FLASH G15t: 15u GOLD ON CONTACT, G30t: 30u GOLD ON CONTACT, CURRENT RATING : 1A: AWG 28 / 1, 2A: AWG 26. INSULATOR RESISTANCE : 1000 OHM MIN. DIELECTRIC WITHSTANDING : AC 500 V. OPERATING TEMPERATURE : - 55 o C ~ o C CONTACT MATERIAL : PHOSPHOR BRONZE. INSULATOR MATERIAL : P.B.T & GLASS REINFORCED ( UL 94V-0 ) FINISH : GOLD OVER NICKEL FA : FA : FA :
10 D-SUB CONNECTOR IDB100-FGft- IDB100-MGft- IDB a 100 G D-SUB CONNECTOR 001 F: FEMALE M: MALE NO. OF CONTACT PLASTIC COLOR 01: BLACK : BLUE 03: GRAY SHELL OPTION a: METAL SHELL b: METAL WITH RIVER ( 4#40 THREAD) c: METAL WITH RIVER ( M3 THREAD) d: PLASTIC SHELL FEMALE Gf: GOLD FLASH MALE OPTION R: WITH BLANK: WITHOUT WIRE SIZE: AWG 26 ~28 DIELECTRIC MATERIAL: P.B.T + 30% G.F. UL94V-0 INSULATOR RESISTANCE : 1000 MOHM AT 500 VDC. OPERATING TEMPERATURE : - 55 o C ~ o C CONTACT RESISTANCE: 15 mohm MA. CONTACT MATERIAL : PHOSPHOR BRONZE. FINISH : GOLD OVER NICKEL FA : FA : FA :
11 1.27 / 2.00 / 2.54 mm CABLE ASSEMBLY FEMALE MALE STANDARD TYPE KEY OPTION REVERSE TYPE CONTACT1 CONTACT2 ASSEMBLY LENGTH CA a CABLE ASSEMBLY ( FLAT CABLE PITCH) 100: 1.27mm PITCH 200: 2.00mm PITCH 300: 2.54mm PITCH CONTACT1 FNR: FEMALE MNR: MALE : NO. OF PINS N: POLARIZATION KEY (OPTION) R: WITH STRAIN RELIFE (OPTION) REVERSE TYPE r: REVERSE TYPE BLANK: STANDARD TYPE CONTACT2 FNR: FEMALE MNR: MALE : NO. OF PINS N: POLARIZATION KEY (OPTION) R: WITH STRAIN RELIFE (OPTION) TOTAL LENGTH = mm FA : FA : FA :
12 2.00mm CABLE ASSEMBLY MODEL NAME 210-FF12N mm CABLE ASSEMBLY MODEL NAME 210-FF14N-203 NOTE: SOME SIZES, STYLES AND OPTIONS ARE NON-STANDARD, NON-CANCELLABLE AND NON-RETURNABLE. USA TEL: TAIWAN TEL: SINGPORE TEL: FA: FA: FA:
2mm Pitch 2 Piece Battery Connector. Horizontal/Vertical
FEATURES Low profile battery connectors (GF21/GF22/GF31 only) with 2.6mm (.12") height. 2 piece type with a highly reliable connection Sequence connection (FMLB : First Mate Last Break, 1 pin only) is
USB 2.0-IP67 Water Resistant Connector System
Section 6 USB 2.0-IP67 Water Resistant Connector System CONEC completed its product line of bayonet locking series, IP67 rated industrial USB 2.0 connector system for harsh environments. The housing can
PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
1.0 SCOPE 1 of 8 E This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of the latest
MINI CIRCULAR DIN PLUGS
MINI CIRCULAR DIN PLUGS 7000 SERIES SERIES. Plug for Cable Solder! Available in 3, 4, 5, 6, 7, 8 and 9 circuits! Voltage rating: 50V AC/DC! With inner metal cover, strain relief cap and plastic hood! Current
.093 [2.36] Commercial Pin and Socket Connectors
![.093 [2.36] Commercial Pin and Socket Connectors](/thumbs/90/101430850.jpg ".093 [2.36] Commercial Pin and Socket Connectors")
.09 [.] Commercial Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold
ELCO Series 8005/8015 A KYOCERA GROUP COMPANY
Series 8005/8015 A KYOCERA GROUP COMPANY Series 8005 Position Miniature IDC Wire to Board Connector Series 8005 is a super compact pin Wire to Board connector designed for high density mounting. This is
2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
EP METAL TYPE - SOLDER ISO ASSEMBLY OF EP MALE ISO ASSEMBLY OF EP FEMALE
EP METAL TYPE - SOLDER The EP Series has set the standard in high performance speaker connectors. Apart from its durability and strength, it offers consistent superior power handling capabilities. Features:
RR-HR. Simplify your cable assemblies REAR RELEASE CRIMP CONNECTORS RR-HR / E11. D-Sub connectors - Stamped and Formed Contacts.
RR-HR D-Sub connectors - Stamped and Formed Contacts REAR RELEASE CRIMP CONNECTORS CHARACTERISTICS Specifications Connectors according to MIL C24308 Materials and Platings Shells Tinned steel with or without
MBNC Series. Right Angle, Vertical, Surface Mount Receptical with Terminating Resistors and Filtering Capacitors
BNC Connectors MBNC Series - Right Angle, Vertical, Surace Mount Receptical with Terminating Resistors and Filtering Capacitors 10-2 MBNC Series - Right Angle, Vertical, Terminators, and Filtered Board
2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
D-subminiature Metal Shell and All Plastic Solder Cup and IDC T* Series
D-subminiature Metal Shell and All Plastic Solder Cup and IDC FEATURES Offered in 9, 15, 25, and 37 position plugs and sockets. Available in Solder Cup and IDC (insulation displacement) terminations for
242, , FAX.
TEL. 886 2 8994 1601, FAX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information SMA SMB Subminiature Connectors Screw Lock Subminiature Connectors Snap Lock 50 Ω 18 GHz
TY3085/6 SERIES. 3.00mm Pitch Wire To Wire Connector. Specification. Circuits. Kingmate
3.00mm Pitch Wire To Wire Connector Assembly Layout Right Angle Type DIP-Type Specification Circuits Pitch Current Rating Voltage Rating Contact Resistance Withstand Voltage Insulation Resistance Temperature
Cover headline Cover headline D-Subminiature Product Overview
Cover headline Cover headline D-Subminiature Product Overview D-Subminiature Connectors D*M, D*MM, D*MA with NM, NMB option connectors are used when non magnetic characteristics are required. Hermetic
3M IDC Ribbon Cable Socket. Series 891
78-51-- Rev A 1 of 8 M IDC Ribbon Cable Socket Series 891 Product Specification 78-51-- Released: 9-7-11 Austin, TX 7876-9 78-51-- Rev A of 8 Table of Contents Section Page 1. Scope........ M Customer
PRODUCT SPECIFICATION
2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
Small-sized, plastic type, push-pull lock connectors
Small-sized, plastic type, push-pull lock connectors RP17 Series Product Specifications Ratings Rated current Rated voltage Features 1. Superior mating operability Secure mating and easy unmating is achieved
Cover headline Cover headline D-Subminiature Product Overview
Cover headline Cover headline D-Subminiature Product Overview D-Subminiature Connectors Key Markets & Applications Invented by Cannon engineers in 1952 for aircraft radio systems, the D-Subminiature was
Cover headline Cover headline D-Subminiature Product Overview
Cover headline Cover headline D-Subminiature Product Overview D-Subminiature Connectors Key Markets & Applications ITT Cannon s D-Subminiature product line is engineered to perform in the harshest environments.
Connector Dimensions. Part Number
CIRCULAR PLASTIC CONNECTORS CONTACT VERSIONS 3, 4, 7, 9, 12 & 25 position models 1 to 8 amps per contact Mixed signal and power or coax available recognized components File No. 102195 Each connector half
JDX Hybrid Mixed Power & Signal
Integrated Mixed Power Backshell and Signal Fire Waterproof Connector The JDX mixed power and signal connector offers the ability to integrate 2 or 3 power contacts with 6 to 8 signal contacts in one connector
242, , FAX.
TEL. 886 2 8994 1601, AX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information Subminiature Connectors Subminiature Connectors Snap Lock 50 Ω 18 GHz 50 Ω 75 Ω 4 GHz 3 GHz
PRODUCT SPECIFICATION
0.8x1.2 mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 0.8x1.2mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug
MCX. Aliner Industries, Inc. No. 32, Lane 387, Min-an Rd., Sinjhuang City, Taipei County 24256, Taiwan
MCX Aliner Industries, Inc. No. 32, Lane 387, Min-an Rd., Sinjhuang City, Taipei County 24256, Taiwan Tel : +886-2-2205-5791 E-mail : sales@aliner.com.tw Fax : +886-2-2203-8052 / 2205-5628 http://www.aliner.com.tw
2.54mm Pitch Bottom Entry Type Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. D 3.00 to 7.92mm (.118 to.312") Pitch FEATURES AND SPECIFICATIONS Features
Setting Standards Connectors M 16
Setting Standards Connectors M 16 inclusive 15 Product Overview 16 Housings page 18 Inserts page 22 Accessories page 29 Technical Data M 16 Control Signal Connectors Mechanical Data Housing Materials and
DeviceNet Series. Cables Cordset Accessories Receptacles Receptacle Accessories Junction Blocks
Series Cables... - Cordset Accessories... - Receptacles... 6-9 Receptacle Accessories. 0- Junction Blocks... -6 L- Mencom Corporation MencomConnectors.com TEL: 770--8 Ph: 800-966- www.mencom.com Series
242, , FAX.
TEL. 886 2 8994 1601, AX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information Subminiature Connectors Subminiature Connectors Snap Lock 50 Ω 18 GHz 50 Ω 75 Ω 4 GHz 3 GHz
Connector MACHINE PIN SOCKET EMS SERIES FEATURES SPECIFICATIONS KINDS OF BASE
MACHINE PIN SOCKET EMS SERIES Connector FEATURES Funnel shaped four-fingered and six-fingered contacts provide easy IC insertion and withdrawal, high reliability Gold plated contact to ensure low contact
5mm Pitch Miniature Potting Connectors for Secondary Power Supply
5mm Pitch Miniature Potting Connectors for Secondary Power Supply DF5 Series Single row type Features 1. Potting Product This connector is capable of potting 9mm maximum, and 22.5mm mounting height is
ReversePolarity Series(SMA,BNC,TNC)
RP ReversePolarity Series(SMA,BNC,TNC) Description Reverse polarity BNC, TNC, N & SMA connectors (RP-BNC, RP-TNC, RP-SMA) are designed for uses in wireless applications where a non-standard interface has
Spring Loaded Contacts
Spring Loaded Contacts Contents ATE Spring Probes Specifications One Part Probes Two Part Probes Spring Loaded Contacts Specifications Spring Loaded Contact Connectors Single Spring Loaded Contacts SMT
Amphenol. Circular. Connectors C 16-1 / C Circular Connectors. Amphenol-Tuchel Electronics
Amphenol C 1-1 / C 1- Circular Circular Connectors Connectors Amphenol-Tuchel Electronics C 1-1 Overview No. of contacts + PE + PE Termination screw solder Wire gauge Rated insulation voltage Current carrying
3M Wiremount Socket Series CHG
78-5-- Rev A of M Wiremount Socket Product Specification 78-5-- Released: -- Austin, TX 787-9 78-5-- Rev A Section Table of Contents of Page. Scope........ M Customer Documents......... Performance and
PRODUCT SPECIFICATION
2.54mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 2.54mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Gauge Size
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
COMPONENT SPECIFICATION M20 SERIES CONNECTORS AUGUST 2016 CONTENTS: SECTION TITLE PAGE. 1 Description of Connector and Intended Application 2
AUGUST 2016 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Gauges 5 APPENDICES NOTES: 1. Third angle projection
CALL (512 ) x6400
The AirBorn stackable compliant connector family is one of AirBorn s solutions for high-density, board-to-board stacking applications. This connector family is available in 0.075 contact spacing and 100
Data sheet E-DAT Industry RJ45 plug black Cat.6 Class E A
Illustrations Dimensional drawing Page 1/7 See enlarged drawings at the end of document Product specification multi-port Cat.6 class E A plug compliance with class E A to ISO/IEC 11801 Ed.2.2:2011-06,
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. EPower Connectors 4.20mm (.165") Pitch Mini-Fit Plus Terminal 46083 Crimp,
SRICOM SRINAR COMMUNICATIONS PVT. LTD.
B A L U N SRICOM & D D F A S S E M B LY SRINAR COMMUNICATIONS PVT. LTD. S R I N A R C O M M U N I C A T I O N S P V T. L T D, called SRICOM in short, is located at Chennai in the southern part of India.
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Insulator Color 9 = UL White 8 = UL Black Special Order
The market and applications for simple and reliable discrete Wire-to-Board connectors continue to evolve. AVX first introduced the 9175 series of surface mountable Insulation Displacement Connectors (IDC)
Broadband performance with low reflection DC to 4 GHz provides low cost connector combined with high quality.
Amphenol RF 36 Connectors Description The name derives from SubMiniature B (the second subminiature design). Developed in the 1960 s, this sub miniature interface has snap-on coupling. Amphenol s connectors
2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Jul.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves
AMPLIMITE Cable Connectors and Shielding Hardware Kits
AMPLIMITE Cable Connectors and Shielding Hardware Kits Quick Reference Guide We offer one of the broadest, most versatile portfolios of D-subminiature connectors in the market with unrivaled engineering
Specifications A2547 SERIES. Standards E E326732
A2547 SERIES 2.54mm pitch wire to board and wire to wire connector Specifications Current rating:3a AC,DC Voltage rating:250v AC,DC Temperature range:-40 C~+105 C Contact resistance:20mω Max. Insulation
2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves the low profile.. Insulation Displacement Area Protected by
PRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply
15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply DF63 Series (UL, C-UL, TÜV, Listed) Features 1. Rated for up to 15A DF63 has the capacity to handle a max of 15A when using 16 AWG wire.
1.27mm Pitch Connector
1.27mm Pitch Connector FX1 Series DIN duplex density mount has been achieved. (DIN 96 contacts and FX1 192 (96x2) Photo 1 Features 1. High density and space saved-din Duplex Mount Achieved The alignment
From dc to 10 GHz the. VSWR shall not exceed 1.3 &.04 (f) where f is the frequency in Gigahertz (GHz).
121 Series Coaxial Snap On & Screw On Types / 50 Ohm & 75 Ohm These 50 and 75 Ohm coaxial connectors are easily inserted into your printed circuit board using an insertion tool. Solder is eliminated and
Data sheet E-DAT Industry RJ45 field plug black Cat.6 Class E A
Illustrations Dimensional drawing See enlarged drawings at the end of document Product specification multi-port Cat.6 class E A plug to be assembled in the field compliance with class E A to ISO/IEC 11801
SPECIFICATION AND PERFORMANCE CHARACTERISTICS SERIAL ATA CABLE ASSEMBLIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF SERIAL ATA CABLE ASSEMBLIES CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page No. 1 CONTENTS: 1.0 SCOPE.. 3 2.0 APPLICABLE DOCUMENTS 3
Acceleration sensors With relay output for limit monitoring Analog / CANopen
Features Acceleration sensor / analog / CANopen Up to two relay outputs for limit monitoring 3 axes detection, MEMS based Measuring range ±2 g Connection: connector M12, 12-pin Offshore capability (plastic
WTN R6 4MM EUROPEAN TYPE AC POWER JACK 10A250V COLOR: GRAY WTN AC SOCKET MATERIAL: BAKELITE 15A125V 10A250V WTN AC SOCKET
02 SERIES II Sf--- WTN-02-1157R3 EUROPEAN SOCKET RATING :2.5A 250VAC DIELETRIC STRENGTH: 1500VAC AT 1 M INUTE INSATION RESISTANCE: 1OOM OHM M INUTE 500VDC WTN-02-1157R6 4MM EUROPEAN TYPE AC POWER JACK
Powerpole Connectors - PP120: up to 240 Amps
Powerpole Connectors - : up to 240 Amps series Powerpole housings are designed to accommodate up to 1/0 ( mm²) wires and handle high currents up to 240 amps. Reducing bushings allow to accept down to #8
2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
2mm Double-Row Connector (Product Compliant to UL/CSA Standard) DF11 Series Features 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
WIRE-PRESS SOCKETS (AXW)
FOR PC BORD TO WIRE XW WIRE-PRESS SOCKETS (XW) FETURES 1. Pressure welding method for superior wiring and no need to strip wires. pplicable wires: WG #22, #24, #26, #28. 2. Two pressure weldings assure
Standard AWG: WTB
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
Stac64 Unsealed Connector System
Unsealed Connector System 2.54mm (.100") Pitch 34729 Female 22.70 x 22.23 Features and Benefits Pre-assembled TPA to receptacle housing shipped as single assembly provide applied labor and cost savings
Poke-Home: Horizontal AWG: WTB INTER CONNECT APPLICATIONS FEATURES AND BENEFITS ELECTRICAL MECHANICAL ENVIRONMENTAL HOW TO ORDER 00X
The new 9276 series connector provides a quick and reliable wire-toboard termination in a sleek 2.5mm pitch SMT package for a broad range of industrial and commercial markets. With almost every product
RWZ CONNECTOR. 1Certified LR Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
Disconnectable Crimp style Wire-to-wire connectors In unit connection, this RWZ connector is a hybrid type double row drawer connector with combined signal and power supply circuits, absorbs misalignment
The GPO male interface is compliant to MIL-STD-348, and it is in accordance with MIL-PRF-39012a and DESC 94007/94008.
GPO, GPPO and G3PO Application Notes Corning Gilbert s push-on connector products allow users flexibility in modular and board layout (in high density situations), frequency bandwidths from DC to 100 GHz
SB 50 Connectors - up to 120 amps
Connectors - up to 120 amps Based off the design pioneered by Anderson in 1953, APP s two pole SB connectors set the standard for DC power distribution and battery connections. connectors feature a one
PRODUCT SPECIFICATION
MINI-FIT SR. SERIES 1.0 SCOPE This specification covers the 10.00 mm / (.394 in.) centerline tin and gold, silver plated connector series, single and dual row versions in wire to wire and wire to printed
Amphenol RF. Mini-BNC Mini-BNC Connectors. Mini-BNC. Description. Features/Benefits. Applications
Amphenol RF 100 Connectors Description Amphenol RF introduces the new generation of quality BNC connectors for the telecommunication and broadband applications for higher connector densities while preserving
Dual Reversing Module
Dual Reversing Module Introduction The E-Plex 425DRM has been designed to simplify wiring in electronic systems by providing the reversing function local to the motor devices thus eliminating long cable
PRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
Powerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 0XX. Wire Gauge Size. Code Accepted Wire Cap Code Wire Gauge Insulation Pages 6-7
The 917X series of surface mount Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from
AVX Wire-to-Board Connectors
AVX Wire-to-Board Connectors www.avx.com Version 11.11 Table of Contents INSULATION DISPLACEMENT CONNECTORS (IDC) WIRE TO BOARD (WTB) DISCRETE WIRE IDC SERIES 9175...................................................................................
PRODUCT SPECIFICATION
ipass TM 0.8 mm PITCH I/O CONNECTOR REVISION: ECR/ECN INFORMATION: EC No: UCP200-137 DATE: 200 / 02 / 08 TITLE: 1 of 14 TABLE OF CONTENTS 1.0 SCOPE 3 2.0 PRODUCT DESCRIPTION 3 2.1 PRODUCT NAME AND SERIES
Gecko Connectors Introduction
Gecko onnectors Introduction Gecko is a mm pitch High-Reliability connector range from Harwin. Improving on the popular 2mm pitch Datamate series, and harnessing the modern technology of micro-machining,
lif flex CirCUit ConneCtor 2.54mm [.100"] CeNTerliNe 1.25mm [.049"] CeNTerliNe 1.00mm [.
![lif flex CirCUit ConneCtor 2.54mm [.100] CeNTerliNe 1.25mm [.049] CeNTerliNe 1.00mm [.](/thumbs/80/80818919.jpg "lif flex CirCUit ConneCtor 2.54mm [.100] CeNTerliNe 1.25mm [.049] CeNTerliNe 1.00mm [.")
dam Technologies, Inc. INTRODUTION: dam Tech P Dual Series Port D-Sub Flexible onnectors Printed ircuit provide (FP) the and means Flexible to increase Flat able I/O (FF) without connectors utilizing are
Multiple Density Solder Eyelet
Multiple Density Solder Eyelet FEATURES Solder lug terminals with.093" x.06" (.36mm x 1.57mm) wiring holes. Two-contact "Jones" connector is round, all others are rectangular. For use in cable-to-panel
1/4" and 3.5 mm Phone Plugs
N Y S P r o d u c t G u i d e P l u g s 1/4" and 3.5 mm Phone Plugs NYS 204 NYS 208 NYS 224G NYS 225B Commercial 1/4" plugs and adapters All connectors acc. EIA RS-453 / IEC 60603-11 Short and long turned
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features Correspond to Board Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header In-line
SBS Connectors - up to 110 amps
Connectors - up to 1 amps NEW 75G 75X Wire to Wire The patented connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact with live circuits.
Amphenol. Advantage. R-Line R-146. Rectangular Attached Multi-Pin Industrial Cable Assemblies. Amphenol - Sine Systems
Amphenol Rectangular Attached Multi-Pin Industrial Assemblies Advantage R-146 R-Line Amphenol - Sine Systems Advantage * vs. the R-Line Molded Advantage Series * Patents pending Low Cost UL & CSA Listed
PRODUCT SPECIFICATION
PRODUCT SPCIFICATION MX150L 12-10-8 AWG WIR-TO-WIR, PANL MOUNT PCB HADR CONNCTOR SYSTM 1.0 SCOP This Product specification covers the 7.62 mm (.300 inch) centerline (pitch) Connector Series terminated
M22 Connectors Specification
Specification 2mm pitch, with 0.5mm square male pin connection system. oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Jumper socket: Male: Finish: Electrical
SBS Connectors - up to 110 amps
SBS Connectors - up to 11 amps SBS 75G SBS 75X Wire to Wire The patented SBS connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact
Powerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
M20 Connectors Specification
Specification mm pitch, with 0.64mm square male pin connection system. mm (.100") PITCH oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Male: Finish: Electrical
By using this Adapter a connection between Socket and Emulator or programming device can be easily achieved.
Series Introduction QFP-Production Use Socket and Emulation-Adapter YAMAICHI's IC149-Series is available in many different formats, from 44 pins to 240 pins. It is designed to fit most of the common semiconductors
Powerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
IDC Plug: WTB Through Wire Cap/Wire Stop Cap
AVX developed the 9159 Series of SMT connectors for co-planar PCB mating for the challenging Solid State Lighting (SSL) market. These connectors needed to be small, low in height, carry up to 5 Amps/contact
Amphenol RF- BNC Connector Series
Page 1 of 7 enter part number Products 7/16 1.0/2.3 1.6/5.6 AMC BNC / RP-BNC C FAKRA SMB FME HN MCX Mini-UHF Mini 75 Ohm SMB MMCX Precision (APC) QDS QMA QWS SC SlimLine BNC SMA / RP-SMA SMB SMC SMP TNC
1.25mm Pitch Miniature Crimping Connector (UL Listed)
1.25mm Pitch Miniature Crimping Connector (UL Listed) DF13 Series Type Mounting Type Mounting Height(h) Features 1. Miniature Size Designed in the low profile at mounting height 5.8mm. (SMT mounting straight
ISO VIEW OF AX SERIES XLR CABLE CONNECTOR
AX SERIES XLR CABLE CONNECTORS ISO VIEW OF AX SERIES XLR CABLE CONNECTOR One piece ground / latch spring design incorporating twin wipe contacts for a direct connection path from mating shell to ground
.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
![.100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES](/thumbs/86/94150234.jpg ".100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES")
Introduction: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements. vailable in Single,
Amphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications
Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility
D-subminiature Metal Shell Crimp and Poke, Right-Angle and Vertical PCB D*U Series
Crimp and Poke, Right-Angle and Vertical PCB Offered in 9, 15, 25, 37, and 50 position plugs and sockets (except right-angle PCB connectors- 9, 15, and 25 positions). FEATURES Available with gold flash
Electrical dielectric withstanding voltage. sea level Vrms Vrms m Vrms Vrms
Applications Mechanical and electrical interface between on-board civil avionics equipments and racks Standards Arinc 600 Characteristics Mechanical material finish aluminum alodine 00 shells alloy to
PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS
BOARD/WIRE-TO-BOARD CONNECTORS PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS Minitek Headers for Pin-in-Paste Processes OVERVIEW Minitek is FCI s brand for board-to-board and wire/cableto-board connectors
CAT 6 Data Wiring System Connectors
NEW CAT 6 Data Wiring System Connectors TM2 Series Features. High-Speed Data Transfer Conforms to the TIA/EIA-568B.2- data Wiring standard, thereby clears CAT 6 transfer performance requirements. As such,
TOGGLE SWITCHES IP67 A 9 SERIES 1B AGENCY APPROVALS SPECIFICATIONS
AGENCY APPROVALS SPECIFICATIONS Sealed miniature toggle switches C IP67 File N E195524 File N E195524 In conformity with: EN 60529: 1991 IEC 529: 1989 CHARACTERISTICS Contact Rating: S (silver) - 5A with
UHV Double-Ended SMA Feedthrough, , Conflat compatible flange
SMA Interface SMA Interface Grounded and Feedthroughs UHV Double-Ended SMA Feedthrough, 110730, Conflat compatible flange UHV male SMA cable 5 assembly, 110755, Kapton insulated 50-ohm coaxial cable Features