2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
|
|
|
- Britney Page
- 5 years ago
- Views:
Transcription
1 mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features Correspond to Board Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header In-line Plug (1) Low profile design with the mounting height of.mm () Achieves the multi-harness by the full automatic ID machine in combination with the DF series ID type. (DF series represents the mm pitch single-row product.please refer to page A to A.) (1) Low profile design with mounting height.mm. (Please refer to the application pattern figure on page A for details.) () Provide the contact crimping area with the sufficient space, and secures the stable crimping operation. (1) The board can be connected horizontally or vertically in combination with the straight header with the right angle header. () For horizontal connection, the board to board size is the low profile of.mm. (Please refer to the application pattern on page A for details.) () Compatibility with the in-line plug allows the receptacle to set the board side to the receptacle and the cable side to the plug in the board to cable connection. (1) The board pre-fixed kink is treated with the post pin. () The style employs a scoop-proof and sturborn box type. () The type corresponding to SMT is avilable, using the heat-proof resin. This SMT header is equipped with the metal tab to prevent peeling in the solder joint area. (1) The crimping in-line plug consits of two types, one type, which has pursued after space merits, and the other employs the panel lock type, which can be fixed to the panel. () The in-line adapter is available to insert and in-line the ID socket from both sides. Applications Business equipment such as copy machine and printer A
2 BEmbossed Carrier Tape Dimensions Product Type Size Number of Contacts A B C D to.. DF/D-*P-H to... to 0... to... BPrecautions 1. Recommended Temperature Profile (SMT) Note1: Maximum twice action is allowed under the same condition. However, the interval between the first and second actions must be maintained at room temperature. Note: The temperature indicates the board surface temperature on the connector lead area.. Recommended Manual Soldering Condition (SMT) Soldering iron temperature: 90±ç, Soldering time: Within seconds. Recommended Screen Thickness (SMT) 0. to 0.mm. Board Warpage (SMT) Based on both connector edges, 0.0mm max. in the connector center portion Flow Condition with Automatic Soldering Tool. Soldering temperature: 0±ç, Soldering time: Within seconds. Recommended Soldering Condition (DIP) Manual Soldering Condition. Soldering iron temperature: 90±ç, Soldering time: Within seconds. Cleaning Condition Refer to the "Nylon Connector Use Hand book".. Connection Condition Refer to the "Nylon Connector Use Hand book". A
3 Product Specifications AWG to :A Operating Temperature Range -ç to +ç Note. Current rating Crimping Wire size AWG :A Operating Humidity Range 0% to 0% Rating Note 1 IDC Wire size Voltage rating AC0V Crimping Press-fit: 0V AC IDC AWG :1A AWG, :1A Press-connect: 0V AC Storage Temperature Range Storagg Humidity Range -ç to +0ç Note. 0% to 0% Rating UL-CSA Safety Standard and Approved specification Rated Current Wire size AWG to : 1A Rated Voltage V AC UL CSA Safety Standard File No. UL :E CSA :LR99 UL CSA Acquisition Objective Item 1DF-*S-C DF/A-*P-DSA/DS DF/DFAA-*EP-C DF-*S-R/ DF-*P-H Item Specification Condition 1. Insulation Resistance 00M ohms min. 00V DC. Withstanding voltage No flashover or insulation breakdown. 0V AC/1 minute. Contact Resistance m ohms max 0mA. Single Insertor/Extraction Force MIN0.N (gf), MAX.N(0gf) Measure by the square steel pin with 0.±0.00mm. Vibration No electrical discontinuity of 1µs or more Frequency: to Hz, single amplitude of 0. mm, hours in each of the directions.. Humidity (Steady state) Contact resistance: m ohms max.insulation resistance: 00M ohms min. 9 hours at temperature of 0ç and humidity of 90% to 9%. Temperature Cycle Contact resistance: m ohms max.:insulation resistance: 00M ohms min. (-ç: minutes to ç: minutes ç: minutes to ç: minutes) cycles. Durability (Mating/un-mating) Contact resistance: m ohms max. Tin plating: cycles Gold plating: 0 cycles Flow: 0ç for seconds Manual soldering: 0ç for seconds 9. Resistance to Soldering Heat No deformation of components affecting performance. Reflow: At the recommended temperature profile Manual soldering: 0ç for seconds Note 1: Includes temperature rise caused by current flow. Note : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Material Product Part Materia Finish Remarks Crimping Socket Insulator Polyamide Black UL9V-0 IDC Contact for Socket Contact Phosphor bronze Tin plated or gold plated ID Socket Insulator Polyamide Black UL9V-0 Contact Phosphor bronze Tin plated or gold plated Receptacle Insulator Polyamide Black UL9V-0 Contact Phosphor bronze Tin plated or gold plated Pin Header Insulator Polyamide Black UL9V-0 Contact Brass Tin plated or gold plated Insulator Polyamide Beige UL9V-0 SMT Pin Header Contact Phosphor bronze Tin plated or gold plated Metal tab Brass Tin plated In-line Plug Insulator Polyamide Black UL9V-0 In-line IDC Contact Contact Phosphor bronze Tin plated or gold plated Insulator Polyamide Black UL9V-0 In-line Adapter Contact Brass Tin plated Note:HRS's tin plating takes actions against whisker. A
4 Ordering Information Connector DF - * q w e S - C r t y q Series Name : DF w Series No. :, A, AA e Number of Contacts : ~ r Connector Type S : Socket P : Pin Header EP : In-line Plug t Contact Pitch : mm y Connection Form/Contact Style C : Crimp socket R : ID socket for AWG R : ID socket for AWG DSA : Straight through hole DS : Right angle through hole V : Straight SMT H : Right angle SMT A : Adapter Contact DF - EPPCFA q w e r Application pattern q Contact Type NONE : For socket EP : For in-line plug w Applicable Wire Size : AWG : AWG to e Contact Type/Packaging Type SCF : Socket contact, Embossed tape SC : Socket contact, Bag PCF : Plug contact, Embossed tape PC : Plug contact, Bag r Plating Type Blank : Tin plated A : Gold plated C : Gold plated A
![ID Socket [Specific No.] * *, (* *) Blank : Tin plated, 0 pieces per bag (01) : Gold plated, 0 pieces per bag () : Tin plated, Tube packaging This picture shows the cable assembled status. Note 1.](/docs-images/81/83275846/images/5-0.jpg "Mark to determine the socket name Mark: R, Mark: R AWG AWG Number of Tube packaging Number of Tube packaging A B A B Contacts Contacts DF- S-R(**) -00--** 190 pieces DF- S-R(**) -009--** 190 pieces")
5 ID Socket [Specific No.] * *, (* *) Blank : Tin plated, 0 pieces per bag (01) : Gold plated, 0 pieces per bag () : Tin plated, Tube packaging This picture shows the cable assembled status. Note 1. Mark to determine the socket name Mark: R, Mark: R AWG AWG Number of Tube packaging Number of Tube packaging A B A B Contacts Contacts DF- S-R(**) -00--** 190 pieces DF- S-R(**) ** 190 pieces DF- S-R(**) ** DF- S-R(**) ** DF- S-R(**) ** 1 DF- S-R(**) ** 1 DF- S-R(**) ** 09 DF- S-R(**) ** 09 DF- S-R(**) -0--** 0 DF- S-R(**) ** 0 DF- S-R(**) -0--** 00 DF- S-R(**) ** 00 DF- S-R(**) -0-0-** DF- S-R(**) ** DF- 9S-R(**) -0--** 9 0 DF- 9S-R(**) ** 9 0 DF-S-R(**) ---** 0 DF-S-R(**) -00--** 0 DF-S-R(**) -0--** 0 DF-S-R(**) -01--** 0 DF-S-R(**) -0-0-** 0 DF-S-R(**) -0-0-** 0 DF-S-R(**) -09--** 00 DF-S-R(**) -0--** 00 DF-S-R(**) ** 0 DF-S-R(**) -0--** 0 DF-S-R(**) ** 0 DF-S-R(**) -0--** 0 Note.The quantity for delivery of the specific No. "None" and (01) is determined per bag (0pcs.). If needed, please order the productsper bag. Note.If the Full automatic IDC machine to hit the DF single core,the () tube packaging specification will be applied. Note.Order the tube packaging product, multiplying the tube packaging quantity (pieces). Applicable Cable Applicable Cable Jacket Diameter DF-*S-R UL1 AWG (/0.) Ø0.9 to 1mm DF-*S-R UL1 AWG (/0.) Ø0.9 to 1mm Applicable ID Connection Tool Type Connection Type Remarks Effective Harness Form 1DF-Both ended, single ended DF Single Contact Punching DF-DF, Separation Connector is the Full Automatic ID Machine AM00/DF DF-DF, Separation specification (). Effective Harness Length Tube packaging applied 0 to,000mm Conduction Inspection Mechanism Installed DF DF Desktop ID Machine DF()/ID-MO DF No restriction DF No restriction Desktop machine for small lot A
6 Crimping Socket Blank: 0 pieces per pack This picture shows the Contact crimped status. Number of Contacts A B Number of Contacts A B DF-S-C(**) DF-S-C(**) DF-S-C(**) DF-S-C(**) DF-S-C(**) DF-S-C(**) DF-S-C(**) ** ** ** -00--** ** ** ** 0 0 DF-19S-C(**) -00--** DF-S-C(**) -00--** DF-S-C(**) ** DF-S-C(**) ** DF-S-C(**) -00--** DF-S-C(**) -00--** DF-S-C(**) ** Note1: The product's contact number indicated. Note: The quantity for delivery of the specification No. "None" is determined per bag (0 pcs.). If needed, please order the products per bag. Note: A quantity of "00 pieces package" and "00 pieces package" for delivery is dealt with pieces. Order example: 00, 00, and 00 pieces... Receptacle 09 () :Tin plated, Tube packaging (0) :Gold plated, Tube packaging Note1: The product's contact number indicated +0.1 Board Through-hole Diameter: Ø0. +0 Number of Contacts A B Tube Package Number of Contacts A B Tube Package DF-S-DSA(**) -00--** 0 0 pieces DF- 9S-DSA(**) ** 09 pieces DF-S-DSA(**) ** 0 0 DF-S-DSA(**) -00--** 1 DF-S-DSA(**) ** DF-S-DSA(**) -00--** DF-S-DSA(**) ** 0 DF-S-DSA(**) ** DF-S-DSA(**) -00--** DF-S-DSA(**) ** 1 DF-S-DSA(**) -00--** DF-S-DSA(**) ** DF-S-DSA(**) ** DF-S-DSA(**) -01--** Note: Please order the tube packaging at the multiplied tube packaging quantity (pieces). A
7 Straight Pin Header +0.1 Board Through-hole Diameter: Ø Kink Pre-fixed Effective Diameter: Ø0. +0 Tin Plating Gold Plating DFA- P-DSA -0-0 DF- P-DSA(01) DFA- P-DSA -- DF- P-DSA(01) DFA- P-DSA -0- DF- P-DSA(01) DFA- P-DSA -- DF- P-DSA(01) DFA- P-DSA DF- P-DSA(01) DFA- P-DSA DF- P-DSA(01) DFA- P-DSA DF- P-DSA(01) DFA- 9P-DSA -01- DF- 9P-DSA(01) DFA-P-DSA -01- DF-P-DSA(01) DFA-P-DSA DF-P-DSA(01) DFA-P-DSA -01- DF-P-DSA(01) DFA-P-DSA -01- DF-P-DSA(01) DFA-P-DSA DF-P-DSA(01) DFA-P-DSA DF-P-DSA(01) Note : The quantity for delivery is determined per bag (0 pcs.). If needed, please order the products per bag. Right Angle Pin Header Number of Contacts 9 A B 0 0 Board Through-hole Diameter: Ø Kink Pre-fixed Effective Diameter: Ø0. +0 Tin Plating Gold Plating DFA- P-DS DF- P-DS(01) DFA- P-DS -00- DF -P-DS(01) DFA- P-DS -01- DF- P-DS(01) DFA- P-DS -0-9 DF- P-DS(01) DFA- P-DS -0-1 DF- P-DS(01) DFA- P-DS -0- DF- P-DS(01) DFA- P-DS -0- DF- P-DS(01) DFA- 9P-DS --0 DF- 9P-DS(01) DFA-P-DS -0- DF-P-DS(01) DFA-P-DS -- DF-P-DS(01) DFA-P-DS -09- DF-P-DS(01) DFA-P-DS DF-P-DS(01) DFA-P-DS DF-P-DS(01) DFA-P-DS DF-P-DS(01) Note : The quantity for delivery is determined per bag(0 pcs.). If needed, please order the products per bag. Number of Contacts 9 A B 0 0 A9
8 Straight Pin Header (SMT) BPCB mounting pattern Note : If a pattern is included in the shaded area and is not treated with resist, it could touch the connector contact. () :Tin plated tube packaging (0) :Gold plated tube packaging With Boss Without Boss Number of Contacts A B C D Tube Packaging DF- P-V(**) -01--** DFD- P-V(**) -0--** pcs. DF- P-V(**) -0--** DFD- P-V(**) --0-** 0... DF- P-V(**) -0-0-** DFD- P-V(**) -09--**... DF- P-V(**) -0--** DFD- P-V(**) -0--**... DF- P-V(**) -0--** DFD- P-V(**) -0--**... DF- P-V(**) ---** DFD- P-V(**) -0--**... 1 DF- P-V(**) -0-0-** DFD- P-V(**) -0-0-** DF- 9P-V(**) ---** DFD- 9P-V(**) -0--** 9... DF-P-V(**) -09--** DFD-P-V(**) -0--**... 1 DF-P-V(**) -00--** DFD-P-V(**) -0-9-**... DF-P-V(**) -01--** DFD-P-V(**) **... DF-P-V(**) -0-0-** DFD-P-V(**) -0--**... DF-P-V(**) -0--** DFD-P-V(**) **... DF-P-V(**) -0--** DFD-P-V(**) -0--** Note : Please order the tube packaging product, multiplying by tube package quantity ( pcs.).... A0
9 Right Angle Pin Header (SMT) BPCB mounting pattern BTube Size Number of Contacts for Embossed Packaging Available DFD-*P-H DFD-*P-H DF- P-H(**) DF- P-H(**) DF- P-H(**) DF- P-H(**) DF- P-H(**) DF- P-H(**) DF- P-H(**) DF- 9P-H(**) DF-P-H(**) DF-P-H(**) DF-P-H(**) DF-P-H(**) DF-P-H(**) DF-P-H(**) Numbers of Contacts (1)Tin plated (1)Gold plated (1)Tin plated (1)Gold plated With Boss -0--** ---** ** -01--** ** -01--** -01--** ** ** -01--** -0--** ** -09--** ** 9 K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K Without Boss DFD- P-H(**) ** DFD- P-H(**) -0-1-** DFD- P-H(**) -0--** DFD- P-H(**) -0--** DFD- P-H(**) -0-0-** DFD- P-H(**) -0--** DFD- P-H(**) -0--** DFD- 9P-H(**) -0--** DFD-P-H(**) ** DFD-P-H(**) -0-0-** DFD-P-H(**) -01--** DFD-P-H(**) -0--** DFD-P-H(**) -0--** DFD-P-H(**) -0-0-** Number of Contacts Note1: Please order the tube packaging product, multipliing the tube package quantity. ( pcs.) Note: Please order the emboss packaging product by the reel number. (1 reel : 00 pcs.) 9 () :Tin plated tube packaging (1) :Tin plated embossed packaging (Note the number of contacts for marchandization.) (0) :Gold plated tube packaging (1) :Gold plated embossded packaging A B C D Tube Packaging. 1 pcs A1
10 In-line Plug Blank: 1 pack Photo: Contact inserted status Number of Contacts A B Number of Contacts A B DF- EP-C(**) -0--** 0 DF- 9EP-C(**) ** 09 DF- EP-C(**) -0--** 0 DF-EP-C(**) ** DF- EP-C(**) -0--** DF-EP-C(**) -00--** DF- EP-C(**) -0-0-** DF-EP-C(**) -00--** DF- EP-C(**) -0--** DF-EP-C(**) ** DF- EP-C(**) -09--** DF-EP-C(**) ** DF- EP-C(**) ** DF-EP-C(**) -00--** Note : The specific No."None" item is delivered per bag (0 pcs.). Please order products per bag unit. In-line Plug with Panel Lock BPanel Cutouts Photo: Contact insertion status Number of Contacts A B C D E DFAA- EP-C(**) -01--** DFAA- EP-C(**) -0--** 0.. DFAA- EP-C(**) -0-0-**.. DFAA- EP-C(**) -0--** 1.. DFAA- EP-C(**) -0--** DFAA- EP-C(**) -0-9-** DFAA- EP-C(**) -0-1-** 1.. DFAA- 9EP-C(**) -0--** 9.. DFAA-EP-C(**) -09--**.. DFAA-EP-C(**) -00--** 9.. DFAA-EP-C(**) ** DFAA-EP-C(**) -0-1-** 1.. DFAA-EP-C(**) -0--**.. DFAA-EP-C(**) -0--**.. Note : Specific No."None" item is delivered per bag (0 pcs.). Please order products per bag unit. Note1: Applicable panel thickness is 1. to 1.0mm. (However, a slight backlash is considered for the thickness other than 1. and 1.mm.) Note: Use the non-radius surface at the hooking panel edge. Note: Contact No. indicates 1,,,, and. Blank : 0 pcs. per bag A
11 In-line Adapter with Panel Lock BPanel Cutouts Adapter to in-line by pushing pcs. of socket from both sides No.1-No.1 connection circuit type DF- EP-A(**) DF- EP-A(**) DF- EP-A(**) DF- EP-A(**) DF- EP-A(**) DF- EP-A(**) DF- EP-A(**) DF- 9EP-A(**) DF-EP-A(**) DF-EP-A(**) DF-EP-A(**) DF-EP-A(**) DF-EP-A(**) DF-EP-A(**) -0-0-** ---** -09--** -00--** -01--** -0-0-** -0--** -0--** -0--** -0-0-** -0--** -0--** ** -00--** Number of Contacts A B D E Note : Specific No."None" item is delivered per bag (0 pcs.). Please order products per bag unit. C 0 0 Note1: Applicable panel thickness is 1. to 1.0mm.(However,backlash will occur except for 1., 1.mm thickness.) Note: Please use the non-radius surface at the hooking panel edge. Blank : 0 pcs. per bag A
12 Crimping Contact for Socket Type Finish DF-SCF -0- Reel contact 000 pcs. per embossed tape bag DF-SC DF-SCF Bulk contact Reel contact 0 pcs. per embossed tape bag 000 pcs. per embossed tape bag Tin plated DF-SC Bulk contact 0 pcs. per embossed tape bag DF-SCFC DF-SCC Reel contact Bulk contact 000 pcs. per embossed tape bag 0 pcs. per embossed tape bag Gold plated Applicable Wire (Tin Plating Annealed Copper Wire) Conductor Size (Wire Configuration) AWG (1pcs./0.mm) AWG (pcs./0.mm) AWG (pcs./0.mm) AWG (pcs./0.mm) Jacket Diameter Ø1. to Ø1.mm Ø0. to Ø1.mm Recommended Wire UL1, UL0 (Note.) Strip Length 1. to.mm Note1: If other wires are used instead of the applicable cable, please contact HRS company. Note: DF-SCF is applicable to UL1. Crimping Contact for In-line Plug Type Finish DF-EPPCF DF-EPPC Reel contact Bulk contact 000 pcs. per reel 0 pcs. per pack Tin plated DF-EPPCFA DF-EPPCA Reel contact Bulk contact 000 pcs. per reel 0 pcs. per pack Gold plated Applicable Wire (Tin Plating Annealed Copper Wire) Conductor Size (Wire Configuration) AWG (pcs./0.mm) AWG (pcs./0.mm) AWG (pcs./0.mm) Jacket Diameter Ø0. to Ø1.mm Recommended Wire UL1, UL0 Strip Length 1.9 to.mm Note1: If other wires are used instead of the applicable cable, please contact HRS company. BApplicable Crimping Tool Type Applicable Contact AP-DF-S DF-SCF/SCFC Applicator AP-DF-S DF-SCF AP-DF-EPP DF-EPPCF/PCFA Press Unit CM DF-TAHC 0-0- DF-SC/SCC Hand Crimping Tool DFEP-TAHC 0-0- DF-EPPC/PCA DF-TAHC 0-0- DF-SC Extraction Tool DF-C-PO (A) DF-****SCF DF-EP****PCF Note : If any trouble has occurred due to tools other than designated tool, Hirose bears no respoisibility for any trouble. A
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features 1. Correspond to Board Design in Wide Variation Crimp Socket Receptacle Pin Header (1) Low profile
2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
2mm Double-Row Connector (Product Compliant to UL/CSA Standard) DF11 Series Features 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) DF Series Features 1. Correspond to oard Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header (1) Low
2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves the low profile.. Insulation Displacement Area Protected by
2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Jul.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves
5mm Pitch Miniature Potting Connectors for Secondary Power Supply
5mm Pitch Miniature Potting Connectors for Secondary Power Supply DF5 Series Single row type Features 1. Potting Product This connector is capable of potting 9mm maximum, and 22.5mm mounting height is
1.25mm Pitch Miniature Crimping Connector (UL Listed)
1.25mm Pitch Miniature Crimping Connector (UL Listed) DF13 Series Type Mounting Type Mounting Height(h) Features 1. Miniature Size Designed in the low profile at mounting height 5.8mm. (SMT mounting straight
2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard) DF1B Series Features 1. New Insulation Displacement and Crimping Ideas This connector is a new type to insert
2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
2.mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard) DF1B Series Oct.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. New Insulation Displacement
2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection
.5mm Pitch Connectors for Full Lock and Discrete Wire Connection DF1E Series UL, C-UL Listed Full lock function added Inner-lock system full lock mechanism Features 1. Full Lock Function dded The inner
2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
2.54mm Pitch Bottom Entry Type Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
1.27mm Pitch Connector
1.27mm Pitch Connector FX1 Series DIN duplex density mount has been achieved. (DIN 96 contacts and FX1 192 (96x2) Photo 1 Features 1. High density and space saved-din Duplex Mount Achieved The alignment
2 2.2 mm Pitch, Wire-to-Wire Connectors for Small Spaces
2 2.2 mm Pitch, Wire-to-Wire Connectors for Small Spaces DF62 Series Compact shape due to 2 x 2.2 grid layout of pins *Both are 7 contacts with 3A current rating 16 16 Existing products DF62 Fig.1 Features
1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
Features 1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies DF65 Series 1. Enhanced contact reliability and lock structure The unique locking structure reinforces the engagement between
1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies
NEW 1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies DF65 Series (UL Pending) Lock structure and operation Socket Header Latch Latches are deflected slightly during mating. Features
15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply
15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply DF63 Series (UL, C-UL, TÜV, Listed) Features 1. Rated for up to 15A DF63 has the capacity to handle a max of 15A when using 16 AWG wire.
0.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable
.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable DF8 Series Superb mating operability Features 1. Supports high speed connections The single row alignment utilizes a.5mm pitch to support
1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
1.7mm pitch, Low Profile Wire-to-oard onnectors for Power Supplies DF Series (UL, -UL, Listed) Lock structure and operation Socket Latch Header Latches are deflected slightly during mating. Features 1.
High Speed, Matched-Impedance, Parallel Board-to-board Connector System
NEW High Speed, Matched-Impedance, Parallel Board-to-board Connector System IT Series (2 required) IT Series Outline High-speed matched-impedance parallel board-to-board connector designed for applications
M20 Connectors Specification
Specification mm pitch, with 0.64mm square male pin connection system. mm (.100") PITCH oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Male: Finish: Electrical
Modular Plug Connectors Compliant to Enhanced Category 5 Standards
Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM2P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B
M22 Connectors Specification
Specification 2mm pitch, with 0.5mm square male pin connection system. oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Jumper socket: Male: Finish: Electrical
CAT 6 Data Wiring System Connectors
NEW CAT 6 Data Wiring System Connectors TM2 Series Features. High-Speed Data Transfer Conforms to the TIA/EIA-568B.2- data Wiring standard, thereby clears CAT 6 transfer performance requirements. As such,
75 Ω Small Coaxial Connectors (SMT Low Profile)
NEW 75 Ω Small Coaxial Connectors (SMT Low Profile) H.FL75 Series 75 ø, up to 3 GHz Figure Connector mating external view 6.5 Mar..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features.
CAT 6 Data Wiring System Connectors
CAT Data Wiring System Connectors TM23 Series Features 1. High-Speed Data Transfer Conforms to the TIA/EIA-58B.2-1 data Wiring standard, thereby clears CAT transfer performance requirements. As such, these
Small-sized, plastic type, push-pull lock connectors
Small-sized, plastic type, push-pull lock connectors RP17 Series Product Specifications Ratings Rated current Rated voltage Features 1. Superior mating operability Secure mating and easy unmating is achieved
Modular Plug Connectors Compliant to Enhanced Category 5 Standards
Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM2P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B
DC to 2.5GHz Small Coaxial Switch
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) P(V) P(V)HF. (MAX.) P PHF P88 P88HF. (MAX.) P PHF P PHF P8HF
2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR R PC board layout (viewed from component side) and Assembly layout
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Secure locking device Solder crack preventive material Low insertion force Insertion guide mechanism Applicable to automatic board
Modular Plug Connectors compliant to Cat.6 A Standard
Modular Plug Connectors compliant to Cat.6 A Standard TM3P Series Features. Support High-Speed LAN transmission Improved performance by two row contact arrangement. Conforms to Cat.6 A requirements of
0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm HighSpeed BoardtoBoard Connections FX11 Series Stacking height : 2mm Stacking height : 2.5mm, 3mm Features 1. Low Profile Design The boardtoboard
.093 [2.36] Commercial Pin and Socket Connectors
![.093 [2.36] Commercial Pin and Socket Connectors](/thumbs/90/101430850.jpg ".093 [2.36] Commercial Pin and Socket Connectors")
.09 [.] Commercial Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold
Miniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions 8.9 mm max. ( pos.). Ø Receptacle Plug Short turn bayonet lock Features. Ease of shielded termination and connector assembly All components
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) P(V) P(V)HF. (MAX.) P PHF P88 P88HF. (MAX.) P PHF P PHF P8HF
Push-on Bayonet Lock Miniature Waterproof Connectors
Push-on ayonet Lock Miniature Waterproof Connectors HR34 Series Push-on ayonet Lock Mating : Just inserting plug unit will complete mating Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights
COMPONENT SPECIFICATION M20 SERIES CONNECTORS AUGUST 2016 CONTENTS: SECTION TITLE PAGE. 1 Description of Connector and Intended Application 2
AUGUST 2016 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Gauges 5 APPENDICES NOTES: 1. Third angle projection
Miniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions (Example : LF07) 8.9 mm max. ( pos.). Oct..07 Copyright 07 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Ease of shielded
Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height
Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.mm Mated Height U.FL Series Meets up to 6 GHz Requirement Mated Height Comparison (With Hirose Product) 1.9(2.0Max) U.FL-LP(V)-00 2.(2.5Max)
PRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
AVX Wire-to-Board Connectors
AVX Wire-to-Board Connectors www.avx.com Version 11.11 Table of Contents INSULATION DISPLACEMENT CONNECTORS (IDC) WIRE TO BOARD (WTB) DISCRETE WIRE IDC SERIES 9175...................................................................................
XA CONNECTOR. 1Certified LR R
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Specifications Current rating: 3 A AC DC (AWG #22, #20) Voltage rating: 250 V AC DC Temperature range: -25 C to +85 C (including
Miniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions (Example : LF07) 8.9 mm max. ( pos.). Sep..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Ease of shielded
PRODUCT SPECIFICATION
2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Gauge Size
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
PRODUCT SPECIFICATION
MINI-FIT SR. SERIES 1.0 SCOPE This specification covers the 10.00 mm / (.394 in.) centerline tin and gold, silver plated connector series, single and dual row versions in wire to wire and wire to printed
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 0XX. Wire Gauge Size. Code Accepted Wire Cap Code Wire Gauge Insulation Pages 6-7
The 917X series of surface mount Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from
2mm Pitch 2 Piece Battery Connector. Horizontal/Vertical
FEATURES Low profile battery connectors (GF21/GF22/GF31 only) with 2.6mm (.12") height. 2 piece type with a highly reliable connection Sequence connection (FMLB : First Mate Last Break, 1 pin only) is
High Power/Signal Connectors for Industrial Machinery
High Power/Signal Connectors for Industrial Machinery PQ Series Variations PQ50W Non water-resistant 20 position type Non water-resistant 48 position type Water-resistant 50 pos. type Contact (9A/pin)
Miniature Waterproof Shielded Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height U.FL Series Features 1. Nominal mated height of 1.9 or 2.3mm, 2.4mm (Max. 2. or 2.4mm, 2.5mm)(Fig.1) 2. Small mounting
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height U.F Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) U.FP(V)HF. (MAX.) U.FPHF U.FP88HF. (MAX.) U.FPHF U.FPHF U.FP8HF
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height U.FL Series Up to 6GHz Mated height comparison (with E.FL series) 1.9 (MAX 2.) U.FL-LP(V)-4HF 2.3 (MAX 2.4) U.FL-LP-62HF
Maximum mated height 1.2mm, Micro Coaxial Connector K.FL2 Series
Connector mated condition Mated height comparison (compared to conventional company products) Fig.1 Features 1. A low mated height of 1.2mm max. When connected, K.FL2 delivers a world class low mated height
Standard AWG: WTB
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Insulator Color 9 = UL White 8 = UL Black Special Order
The market and applications for simple and reliable discrete Wire-to-Board connectors continue to evolve. AVX first introduced the 9175 series of surface mountable Insulation Displacement Connectors (IDC)
IDC Plug: WTB INTER CONNECT APPLICATIONS FEATURES AND BENEFITS ENVIRONMENTAL MECHANICAL ELECTRICAL HOW TO ORDER 00X
AVX developed the 9159 Series of SMT connectors for co-planar PCB mating for the challenging Solid State Lighting (SSL) market. These connectors needed to be small, low in height, carry up to 5 Amps/contact
CF Series AXC5/AXC6. FEATURES 1. Vertical mating type with a 0.8 mm mated height low profile design
For board-to-micro coaxial wire Micro coaxial connectors (Low profile) AC5/AC6 CF Series 2. with strong resistance to various environments provides high contact reliability and facilitates connection work
YL CONNECTOR. 1Certified LR R Specifications. Standards. 4.5mm pitch/disconnectable Crimp style Wire-to-wire connectors
.mm pitch/disconnectable Crimp style Wire-to-wire connectors Panel lock Inner lock lance Specifications Current rating: 0A AC, DC max. (A when retainers are mounted) Voltage rating: 00V AC, DC max. Temperature
Operating Temperature: -40ºC to +125ºC 6XX. Wire Gauge Size
AVX developed the initial SMT discrete wire IDC connector 5 years ago for 26-28AWG AVX wires. Since then, we have seen this Wire-to-Board (WTB) contact technology spread to multiple wire gauges and multiple
AMPLIMITE Cable Connectors and Shielding Hardware Kits
AMPLIMITE Cable Connectors and Shielding Hardware Kits Quick Reference Guide We offer one of the broadest, most versatile portfolios of D-subminiature connectors in the market with unrivaled engineering
PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS
BOARD/WIRE-TO-BOARD CONNECTORS PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS Minitek Headers for Pin-in-Paste Processes OVERVIEW Minitek is FCI s brand for board-to-board and wire/cableto-board connectors
PRODUCT SPECIFICATION
2.54mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 2.54mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
PRODUCT SPECIFICATION
EC No: UC2018-0645 1.0 SCOE This roduct Specification covers the performance requirements and test methods of Micro-Fit 3.00 mm (.118 inch) centerline (pitch) wire to board and wire to wire connector systems
2.4mm coaxial connectors for frequency test measurements
2.4mm coaxial connectors for frequency test measurements 2.4mm Series Functional diagram Straight plug H2.4-P-SS085 Plug side Attenuator PlugJack H2.4-AT (**)-PJ ** 0, 3, 6, 10, 20dB Features 1. Complies
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. EPower Connectors 4.20mm (.165") Pitch Mini-Fit Plus Terminal 46083 Crimp,
sealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
Spring Loaded Contacts
Spring Loaded Contacts Contents ATE Spring Probes Specifications One Part Probes Two Part Probes Spring Loaded Contacts Specifications Spring Loaded Contact Connectors Single Spring Loaded Contacts SMT
- UMP series : board to wire application
MMP INTRODUCTION RADIALL, the pioneer in SMT coaxial connectors with the MMS series, has become a world wide leader in this technology. Thanks to this SMT expertise, RADIALL now announces another breakthrough
PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
1.0 SCOPE 1 of 8 E This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of the latest
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 5XX. Wire Gauge Size
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable
PRODUCT SPECIFICATION I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable P/N 20351-112R-37 P/N 20279-001E-01 RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw
PRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)
![2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)](/thumbs/95/122825409.jpg "2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)")
2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin) DF59 Series Features Common to all series 1. High Operating Temperature DF59 s are
10+Gbps 0.8mm pitch Board to Board Connectors
NEW 1+Gbps.mm pitch oard to oard onnectors FX1 Series.mm Pitch Variations :oplanar / Vertical / Stacking Number of ontacts : / / / 1 / 1/ 1 Multi functional contact (MF contact) as; q ground contact to
2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)
![2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)](/thumbs/75/71817925.jpg "2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)")
2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin) DF59 Series DF59 floating amount ±0.5mm(X,Y, Z directions) Features Common to all
2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)
![2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)](/thumbs/88/114674935.jpg "2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)")
2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin) DF59 Series DF59 floating amount ±0.5mm(X,Y, Z directions) Features Common to all
Discrete Wire IDC Contact & Cap
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
SSL - Discrete Wire IDC Contact & Cap
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
PRODUCT SPECIFICATION
0.8x1.2 mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 0.8x1.2mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Gauge Size. Code Accepted Max Wire Gauge Insulation AWG Solid or Stranded
AVX continues to develop innovative connectors for the industrial electronics market that provide significant benefits over existing, outdated connector solutions. Listening to the design engineering community,
Handling Precaution for Terminal and Connector
1 Handling Precaution for Terminal and Connector Handling Precaution for Terminal and Connector This manual is to describe basic precautions for use of terminal and connector in the following. Make use
Connector MACHINE PIN SOCKET EMS SERIES FEATURES SPECIFICATIONS KINDS OF BASE
MACHINE PIN SOCKET EMS SERIES Connector FEATURES Funnel shaped four-fingered and six-fingered contacts provide easy IC insertion and withdrawal, high reliability Gold plated contact to ensure low contact
Poke-Home: Inverted Thru Board AWG: WTB INTER CONNECT FEATURES AND BENEFITS APPLICATIONS ELECTRICAL MECHANICAL ENVIRONMENTAL
AVX continues to develop innovative connectors for the industrial electronics market that provide significant benefits over existing, outdated connector solutions. Listening to the design engineering community,
IDC Plug: WTB Through Wire Cap/Wire Stop Cap
AVX developed the 9159 Series of SMT connectors for co-planar PCB mating for the challenging Solid State Lighting (SSL) market. These connectors needed to be small, low in height, carry up to 5 Amps/contact
Modular Jack Connector for High-Speed Transmission
All non-rohs products NEW have been discontinued, will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connects.com, contact your Hirose sales representative.
Poke-Home: Horizontal AWG: WTB INTER CONNECT APPLICATIONS FEATURES AND BENEFITS ELECTRICAL MECHANICAL ENVIRONMENTAL HOW TO ORDER 00X
The new 9276 series connector provides a quick and reliable wire-toboard termination in a sleek 2.5mm pitch SMT package for a broad range of industrial and commercial markets. With almost every product
I-PEX MHF3 Micro Coaxial Connector Mating Heigh: 1.5mm MAX
PRODUCT SPECIFICATION I-PEX MHF3 Micro Coaxial Connector Mating Heigh: 1.5mm MAX P/N 20367-001R P/N 20369-001E RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw Tel: +886-2-24239376
SBS Connectors - up to 110 amps
Connectors - up to 1 amps NEW 75G 75X Wire to Wire The patented connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact with live circuits.
ELCO Series 8005/8015 A KYOCERA GROUP COMPANY
Series 8005/8015 A KYOCERA GROUP COMPANY Series 8005 Position Miniature IDC Wire to Board Connector Series 8005 is a super compact pin Wire to Board connector designed for high density mounting. This is
VersaBlade Wire-to-Wire Connection System
VersaBlade Wire-to-Wire Connection System VersaBlade Wire-to-Wire Connection System For Home Appliance Contents 0 Product Overview 05 Feature and Benefits 0 Specifications 07 Mating Structure Ordering
Amphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications
Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility
SBS Connectors - up to 110 amps
SBS Connectors - up to 11 amps SBS 75G SBS 75X Wire to Wire The patented SBS connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact
45Amp,10.16 mm pitch, Board to Wire Connector for Internal Power Supply
45Amp,10.16 mm pitch, Board to Wire Connector for Internal Power Supply DF60 Series (UL, C-UL, TÜV certified product) Figure 1 Features 1. High current capacity Capable of going to a max. of 45A when using
.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
![.100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES](/thumbs/86/94150234.jpg ".100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES")
Introduction: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements. vailable in Single,
SB 50 Connectors - up to 120 amps
Connectors - up to 120 amps Based off the design pioneered by Anderson in 1953, APP s two pole SB connectors set the standard for DC power distribution and battery connections. connectors feature a one
JULY 2014 SECTION TITLE PAGE. 1 Description of Connectors and Intended Applications 2. 2 Marking of Connector and/or Package 2.
M80 & M83 SERIES RECTANGULAR CONNECTORS JULY 204 SECTION TITLE PAGE Description of Connectors and Intended Applications 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix Contact Orientations
SECTION 5 SWITCHING CONNECTORS/MOEBIUS MC-CARD/RP-MCX R199/R299 SIMPLIFICATION IS OUR INNOVATON. Visit for more information
SECTION 5 SWITCHING CONNECTORS/MOEBIUS MC-CARD/RP-MCX R199/R299 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents Introduction... 5-4 to 5-5 MOEBIUS Characteristics...