0.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable

Transcription

1 .5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable DF8 Series Superb mating operability Features 1. Supports high speed connections The single row alignment utilizes a.5mm pitch to support 2.7Gbps & 5.4Gbps speeds and produces excellent signal characteristics. Supports edp TM Embedded DisplayPort TM version Maximizes space Designed to be a space saving connector, this series features a.5mm pitch, a low-mated height, and a single row layout in a vertical mating style. 3. Excellent mating operation It features long mating guides and a generous lead in opening that makes it easy to visually check the connection. (Lead-in amount: ± 1mm)(Fig. 1) 4. Reliable contact structure The DF8 series utilizes its effective contact length (.5mm) and a 2 point type contact structure to ensure high contact reliability.(fig. 2) 5. Shield performance enhancement By utilizing multiple contacts between the plug and receptacle shells, the shielding performance is enhanced and creates a more reliable contact. (Fig. 3) 6. Durable plug structure The plug has two metal covers around it to form a rigid structure. 7. Secure locking system with a clear tactile click A tactile click ensures that the lock function has been completed and is properly secured. This system also produces excellent lock retention. 8. Structure supports a pull tab The structure was designed to allow a pull tab to be utilized to aid in un-mating the connector. 9. Halogen-free and RoHS compliant All materials and substances used to produce these parts comply with the Halogen-free and RoHS free standards. * Defined according to IEC Br: 9 ppm or below, Cl : 9 ppm or below, Br+Cl: 1,5 ppm or below 1.72 ±.8 (mated height) (.5) Effective mating length High contact reliability Shield performance enhancement Multiple ground springs/points (8 places) Fig. 1 Fig. 2 Fig

2 Product Specifications Ratings Rated Current Rated Voltage Discreet Cable 32 AWG :.5A 36 AWG :.35A Thin wire coaxial cable(note 3) 4 AWG :.2A 42 AWG :.2A 44 AWG :.15A 46 AWG :.1A AC/DC 5V Operating Temperature Range Operating Humidity Range Storage Temperature Range Storage Humidity Range Items Specifications Conditions 1. Insulation Resistance Minimum of 5Mø Measured with DC 1V 2. Withstanding Voltage No flashover or breakdown Apply AC 15V for 1 minute 3. Contact Resistance Signal : Maximum of 8mø GND : Maximum of 8mø 4. Vibration Resistance No electrical discontinuity of 1µs or greater 5. Humidity Resistance 6. Temperature Cycles Contact resistance (difference from initial state) Maximum of 5mø Insulation resistance Minimum of 25mø Contact resistance (difference from initial state) 5mø or below, Insulation resistance 25mø or above 7. Durability Contact Resistance: Maximum of 5mø 3 mating cycles 8. Soldering Heat Resistance Should be no melting of resin parts that affects its performance 35~+85ç (Note 1) 2 to 8% 1~+6ç (Note 2) 4~7% (Note 2) 1mA (DC or 1,Hz) measurement 1 cycles in each of three directions at frequency 1-55Hz, half amplitude.75mm Left at temperature 4±2ç, humidity 9 to 95%, 96 hours ( 55ç : 3 minutes 5~35ç : 2~3 minutes 85ç : 3 minutes 5~35ç : 2~3 minutes) 5 cycles Reflow : according to the Recommended Temperature Profile Hand solder : Soldering iron temperature 35ç, 3 seconds Note 1 : Includes the temperature rise caused by current flow. Note 2 : The term storage refers to products stored for a long period prior to mounting and use. The operating temperature and humidity range covers the non-energized condition of installed connectors in storage, shipment or during transportation after board mounting. Note 3 : With only the connector portion at an elevated temperature level, the rated current value is set. Materials / Finish Product Component Materials Finish Specifications Insulator LCP Black UL94V- Receptacle Contact Phosphorous bronze Gold plating Metal fitting Phosphorous bronze Tin plating Insulator LCP Black UL94V- Plug Contact Phosphorous bronze Gold plating Outer Shell Stainless steel Tin plating Shell Outer Shell Stainless steel Tin plating Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. Connector DF 8 * S.5 V * * DF 8 * P SHL Series Name : DF Series No. : 8/8 D No. of Contacts : 3, 4, 5 Connector Type S : Receptacle P : Plug Contact pitch :.5mm Termination method V : Vertical SMT SD : Thin wire coaxial plug Packaging Type (51) Embossed packaging Separately installed parts SHL : Outer shell 2

3 Receptacle (SMT) A±.1 Contact No.1 P=.5±.5 t=.1±.15 B±.1 C±.1 D± ±.1 5±.1 Part No. HRS No. No. of Contacts A B C D E F G DF8-3S-.5V(**) ** DF8-4S-.5V(**) ** DF8-5S-.5V(**) ** Note 1 : This product is sold in full reel quantities of 5, pcs/reel. Please place orders by full reel quantities. BRecommended PCB layout (.55) Pattern prohibited area A P=.5±.2.25±.2 ±.5 ±.5 (K) Pattern prohibited area ±.5 Contact pad 1.8±.2 (1.86) Vacuum pick up area (E) Vacuum pick up area F±.1 G±.1 B±.1 Connector outline GND pad.5±.5.5±.5.58±.5 Specification No.- **, (**) (51) : Embossed packaging (1.45) Pattern prohibited area L ±.5 Pattern prohibited area M±.5 N±.5 P±.5 4.5±.5 5.5±.5 (.25).135±.2 AFREE.65±.2 Part No. HRS No. No. of Contacts H J K D L M N P DF8-3S-.5V(**) ** DF8-4S-.5V(**) ** DF8-5S-.5V(**) **

4 Plug A±.1(Contact area) P=.5±.5(Contact area pitch) A±.1(Contact Termination area) P=.5±.5(Contact Termination area pitch) 1.69±.1 Part No. HRS No. No. of Contacts A B C D DF8D-3P-.5SD(**) ** DF8D-4P-.5SD(**) ** DF8D-5P-.5SD(**) ** Note 1 : This product is sold in full reel quantities of 5, pcs/reel. Please place orders by full reel quantities. Note 2 : When terminating electric wire, the outer shell (DF8-*P-SHL) is required. BRecommended wire preparation diagram E(FREE) B±.5 C±.1 Center conductor (Pre-soldered) 5.1±.1 Specification No.- **, (**) (51) : Embossed packaging P=.5±.7 D±.1 A±.15 E 2.5± ±.5.8±.5 Dielectric Outer shield (for individual conductor).5 mm Max..5±.5 Jacket.57 ±.3 (Ground bar thickness) Note 1 : Pre-soldering with lead free solder is required for the center conductor. 4

5 Outer shell A±.5.34± ± ± ±.1 B±.3 C±.3 D±.3.6± ±.5 Part No. HRS No. No. of Contacts A B C D DF8-3P-SHL DF8-4P-SHL DF8-5P-SHL Note 1 : This product is sold in full reel quantities of 1, pcs/reel. Please place orders by full reel quantities. 5

6 BEmbossed tape and reel dimensions (JIS C 86/IEC6286 compliant) Receptacle 4±.1 2±.1 8±.1 Ø A± ±.1 (2.25) Reel Dimensions Product label Ø13±.2 Ø1.5 holes for feed mechanism on back edge of carrier tape (Ø79) Ø382MAX R Part No. HRS No. No. of Contacts A B C D E DF8-3S-.5V(51) DF8-4S-.5V(51) DF8-5S-.5V(51) BEmbossed tape and reel dimensions (JIS C 86/IEC6286 compliant) Plug.2±.5 Ø ±.1 Unreeling Direction 4± ±.1 ±.3 B±.1 C± Ø21±.8 2±.5 Reel Dimensions Product label Ø13±.2 Ø1.5 holes for feed mechanism on back edge of carrier tape E MAX (Ø79) D +2 Ø382MAX ±.1 ±.3 Ø21±.8 2±.5 D +2 E MAX.2±.5 R Unreeling Direction Part No. HRS No. No. of Contacts A B C D E DF8D-3P-.5SD(51) DF8D-4P-.5SD(51) DF8D-5P-.5SD(51)

7 BOperating Precautions 1. Recommended Soldering Profile (Supports lead-free mounting) 25 MAX 25ç ç Temperature (ç) ç 18ç 2. Recommended hand solder conditions 3. Recommended screen thickness : Opening ratio (pattern area ratio) 4. Leaning of PCB 1 9 to 12 seconds Preheating time [Applicable Conditions] 1. Peak temperature : 25ç MAX 2. Heating parts : 22ç or above, within 6 seconds 3. Preheating parts : 15 to 18ç, 9 to 12 seconds 4. Number of times : No more than 2 times *Solder composition : Sn- 3 Ag-.5 Cu Maximum of 6 seconds Soldering time Note 1 : This temperature profile is recommended values. The maximum temperature of the soldering iron should be 35ç with a maximum contact time of three seconds. Thickness :.1mm, opening ratio : lead 1%, ground 1% Time (sec) Maximum of.2mm at the center of connector (using both edges of connector as criteria) 5. Washing conditions IPA washing OK. (Washing is not recommended as it may alter the tactile click feel upon mating. Please contact your local rep if you plan on using another cleaning agent.) 7

8 Powered by TCPDF ( DF8 Series.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable BOperating Precautions Operating Precautions Connector mating procedure When inserting the plug, press straight down on the entire surface of the plug until it is completely inserted. Do not press down on the wires when mating. Inserting the plug while pressing down on the wires may cause an angled insertion to occur and may result in damage to the connector. Connector unmating procedure Un-mating the connector can be done in two different methods : unmating with fingers or with the pull tab. Do not pull/hold on the terminal wires during extraction. Doing so can lead to damaged or disconnected wires. Unmating with fingers Pull up on the extension hook that is part of the connectors plug. The extension hook is made of metal, so please use caution when manipulating it as it may cause damage to your nail or finger. Unmating with pull tab Pull up on the tab in the arrowed direction (vertically) to extract the plug. Extension hook Do not mate and unmate this connector if it has not been mounted on a PCB, doing this can damage and deform the contacts. Using excessive force while mating or unmating will damage the contacts or connector. When hand soldering, do not apply excessive amounts of flux. Doing so may promote solder wicking ,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi ,JAPAN TEL: Fax: The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 9/217. Contents are subject to change without notice for the purpose of improvements.