Push-on Bayonet Lock Miniature Waterproof Connectors
|
|
|
- Cecil Chandler
- 5 years ago
- Views:
Transcription
1 Push-on ayonet Lock Miniature Waterproof Connectors HR34 Series Push-on ayonet Lock Mating : Just inserting plug unit will complete mating Dec Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Features 1. Water and dust protection IP67 or more (IP68) water and dust protection rating when fully mated. Resistant to industrial grade oils. 4-position receptacles are sealed against water penetration when mounted on the panel - no protective cap is required. 2. Easy and precise mating Mating: Just inserting plug unit completes mating Unmating: Rotating sleeve counterclockwise unlocks connectors (fig.1) Marking helps align plug with receptacle when mating. 3 guide keys make blind mating possible. (Receptacle structure prevents plug from damaging receptacle terminals) 3. Multi-directional cable exit Right angle plugs allow the cable to exit in 8 directions, in 45 increments.(fig.2) 4. Safty standards The 4-position connectors meet requirements of TÜV standard. 5. Wide variation Un-mating : Rotating sleeve to unlock mating Cable exit directions fig.1 fig.2 Item Number of positions Connector type Terminations(plug) Terminations(receptacle) Conduit material pplicable cable size(reference) 4,10 straight plug,right angle plug,receptacle solder,crimp wire solder plastic,metal,, (Ø8.0~9.0)
2 HR34 Series Push-on ayonet Lock Miniature Waterproof Connectors Product Specifications Ratings Current rating Voltage rating 10 pos. : 3 4 pos. : 5 10 pos. : 200V C, 250V DC 4 pos. : 200V C, 200V DC (Pollution degree 3) 400V C, 400V DC (Pollution degree 2) Operating temperature range Storage temperature range -25 C to 125 C -10 C to 60 C Dec Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Item 1.Contact resistance 2.Insulation resistance 3.Withstanding voltage 4.Vibration 5.Shock 6.Durability (Mating / un-mating) 7.Temperature cycle 8.Humidity 9.Water protection 20mø max. 1,000Mø min. Materials / Finish Plugs Outer shell Insulator Female contacts O-ring Gasket Receptacles Specification No flashover or insulation breakdown No electrical discontinuity of 10μs or longer No electrical discontinuity of 10μs or longer Contact resistance : 30mø max. Insulation resistance : 500Mø min. Insulation resistance : 50Mø min. (at high humidity) Insulation resistance : 500Mø min. (when dry) No water penetration inside connector Conditions 1 DC 500V DC 10 pos. : 900V C / 1 minute 4 pos. : 2,000V C / 1 minute Frequency : 10 to 500 Hz/cycle, total amplitude of 0.75 mm, 98m/s 2 each, 3 hours in 3 axis. cceleration of 490 m/s 2, 11 ms duration, 3 axis, each for 3 hours 500 cycles Part Material Finish 10 pos. 4 pos. Zinc alloy, aluminum alloy, and polyamide resin (black) PPS Phosphor bronze Copper alloy Fluororubber, Nitrile hydride rubber Temperature : -55 C / +15 to +35 C / +85 C / +15 to +35 C Time :-30 min. / 2 to 3 min. / 30 min. / 2 to 3 min. 5 cycles 336 hours at 71 C, and humidity of 95% t the depth of 1meters for 0.5 hours. lack chrome plating, black chromate finish (Trivalent Chromium) Color : lack Gold plated Silver plated Part Material Finish Outer shell Insulator Zinc alloy PPS lack chromate finish (Trivalent Chromium) Color : lack Male contacts 10 pos. Copper alloy Gold plated 4 pos. rass Silver plated Ground contact O-ring 4 pos. rass Fluororubber Silver plated Remarks UL94V-0 Remarks UL94V-0 2
3 HR34 Series Push-on ayonet Lock Miniature Waterproof Connectors Product Number Structure Plugs HR34-12 WP - 10 S - X (**) Dec Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. 1 Series name : HR34 Series 5 2 Shell size : Diameter(mm) of the mating interface of the plug 3 Shell style WP : Straight plug 6 WLP : Right-angle plug 4 Conduit material and pplicable cable size : Conduit material metal, pplicable cable (Reference) : 7 : Conduit material metal, pplicable cable (Reference) : D : Conduit material plastic, pplicable cable (Reference) : E : Conduit material plastic, pplicable cable (Reference) : 8 K : Conduit material metal, pplicable cable (Reference) : (Ø8.0~9.0) Receptacles HR34-12 WR - 10 P - X (**) Series name : HR34 Series 5 2 Shell size : Diameter(mm) of the mating interface of the plug 3 Shell style WR : Receptacle 6 4 Shell type : Square flange for 10 positions 7 : Square flange for 4 positions Crimp contacts HR34 - SC Series name : HR34 Series 4 2 Contact style : SC1 : Female contact 5 3 Contact type 1 : 100pcs/pack 2 : 10,000pcs/reel 8 Number of contacts. (Excluding ground contacts) Contact type S : Female, wire solder SC : Female, crimp Keying lank : Standard X : X key position Other specifications : 2 numerical digits wil be added when there is a specifications change other than shown in positions q to u Number of contacts. (Excluding ground contacts) Contact type P : Male,wire solder Keying lank : Standard X : X key position Other specifications : 2 numerical digits wil be added when there is a specification change other than shown in positions q to u Conductor size : 20 to 25WG Plating 1 : Gold plated 3
4 HR34 Series Push-on ayonet Lock Miniature Waterproof Connectors Straight plugs Standard type (Conduit material :Plastic) 49 Dec Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. 9 HR34-12WPD-10S HR34-12WPE-10S HR34-12WPD-4S HR34-12WPD-4S-X HR34-12WPE-4S HR34-12WPE-4S-X HR34-12WPD-10SC HR34-12WPE-10SC HR34-12WP-10S(71) HR34-12WP-10S(71) HR34-12WPK-10S Crimp (separate contacts required) HR34-12WP-10SC HR34-12WP-10SC Robust type(conduit material :Metal) Crimp (separate contacts required) Ø9.5 pplicable cable diameter range(reference) pplicable cable diameter range(reference) pplicable cable diameter range(reference) (Ø8.0~9.0) pplicable cable diameter range(reference) ll dimensions : mm.7 ll dimensions : mm HR34-12WPK-10SC Ø9.5 (Ø8.0~9.0) Not all cables of applicable dia. range can be easily assembled. Please kindly check with factory before use. Illustrations of mated connectors. Straight plug Mating combinations 10 pos.plug + receptacle wire solder pos.plug + receptacle wire solder
5 HR34 Series Push-on ayonet Lock Miniature Waterproof Connectors Right angle plugs Standard type (Conduit material : Plastic) Dec Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. HR34-12WLPD-10S HR34-12WLPE-10S HR34-12WLPD-4S HR34-12WLPD-4S-X HR34-12WLPE-4S HR34-12WLPE-4S-X HR34-12WLPD-10SC HR34-12WLPE-10SC HR34-12WLP-10S(71) HR34-12WLP-10S(71) HR34-12WLPK-10S HR34-12WLP-10SC HR34-12WLP-10SC Crimp (separate contacts required) Robust type (Conduit material :Metal) Ø Crimp (separate contacts required) pplicable cable diameter range(reference) pplicable cable diameter range(reference) pplicable cable diameter range(reference) (Ø8.0~9.0) pplicable cable diameter range(reference) ll dimensions : mm.7 ll dimensions : mm HR34-12WLPK-10SC Ø (Ø8.0~9.0) Not all cables of applicable dia. range can be easily assembled. Please kindly check with factory before use. Illustrations of mated connectors. Right-angle plug Mating Combinations 10 pos. plug shell, type. Plug + receptacle wire solder 10 pos. plug shell D,E type. Plug + receptacle wire solder 10 pos. plug shell K type. Plug + receptacle wire solder 4 pos. plug + receptacle wire solder
6 HR34 Series Push-on ayonet Lock Miniature Waterproof Connectors Receptacles 4-(R2.8) 4-Ø Dec Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. HR34-12WR-10P HR34-12WR-4P HR34-12WR-4P-X O ring for water proof is not attached. Please find appropriate one from the market. Recommended panel cutouts Receptacle - wire solder C Receptacle Contact rrangement ØD ØE 4-4 pos.wire solder 10 pos.wire solder C D E ll dimensions : mm.4 Recommended O ring dia. HR34-12WR-10P HR34-12WR-4P HR34-12WR-4P-X HR34-12WR-10P 17.26± / / /0 Crimp contacts Female M3 0.5 Thickness.5.5 note.1 View direction : Mating surface note.2 mark is ground terminal. ll dimensions : mm HR34-12WR-4P HR34-12WR-4P-X 18.26± / / /0 Inner diameter HR34-SC HR34-SC Note : Use wire with a jacket diameter of 1.7mm max. Packaging 100 pcs/pack 10,000 pcs/reel pplicable conductor 20 to 25WG (Stranded wire) 6
7 HR34 Series Push-on ayonet Lock Miniature Waterproof Connectors Connector Mating Combinations 10 pos. Plugs 10 pos. Receptacles Straight, Wire Solder or Crimp HR34-12WP-10S(71),10SC HR34-12WP-10S(71),10SC HR34-12WPD-10S,10SC HR34-12WPE-10S,10SC HR34-12WPK-10S,10SC Wire Solder HR34-12WR-10P Right angle, Wire Solder or Crimp HR34-12WLP-10S(71),10SC HR34-12WLP-10S(71),10SC HR34-12WLPD-10S,10SC HR34-12WLPE-10S,10SC HR34-12WLPK-10S,10SC Dec Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. 4 pos. Plugs 4 pos. Receptacles Straight, Wire Solder (Standard key position) HR34-12WPD-4S HR34-12WPE-4S Right angle, Wire Solder (Standard key position) HR34-12WLPD-4S HR34-12WLPE-4S Straight, Wire Solder (X key position) HR34-12WPD-4S-X HR34-12WPE-4S-X Standard key position Wire solder (Standard key position) HR34-12WR-4P Standard key position Wire solder (X key position) HR34-12WR-4P-X Right angle, Wire Solder (X key position) HR34-12WLPD-4S-X HR34-12WLPE-4S-X X key position X key position 7
8 Powered by TCPDF ( HR34 Series Push-on ayonet Lock Miniature Waterproof Connectors pplicable tools Description pplicable contact pplicable cable Manual contact crimping tool Press pplicator Contact extraction tool HT304/HR34-1 CM-105C P105-HR34-1 RP6-SC-TP Manual contact crimping tool Press CM-105C (pplicator ordered separate) HR34-SC1-111 HR34-SC1-211 HR34-SC1-111 HR34-SC WG,23WG,25WG 20 to 25WG Contact extraction tool Dec Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Handling Receptacle Precautions 1. Mating 2. Un-mating Plug Mating position alignment marks Holding the plug by the outer shell () align the arrow on the plug with the alignment mark on the receptacle and push straight in. Center line of the connector lignment mark Rotate counter-clockwise Rotate the sleeve () counter-clockwise to a full stop and un-mate the plug from the receptacle. When completely mated and locked the alignment arrow on the plug must line-up with the center line of the connector (alignment mark on the receptacle). If the alignment arrow and the center line of the connectors are not aligned (1 mm max.) re-insert the plug until they are aligned. 1 mm max. 1. When disconnecting or inserting the connector, be sure to do so after turning off the power. 2. To insert the connector, push it in until the arrow tip of the plug mating mark indicates the specified position of the diagram below (i.e., the mating mark of the receptacle). 3. Note that the display method of the mating mark will differ depending on the receptacle. 4. To maintain the waterproof quality and cable clamp force, use a cable that is within the range of the applicable cable diameter. 5. Please consult Hirose Electric Sales for harness assembly procedure ,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi ,JPN TEL: Fax: The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 01/2016. Contents are subject to change without notice for the purpose of improvements.
Small-sized, plastic type, push-pull lock connectors
Small-sized, plastic type, push-pull lock connectors RP17 Series Product Specifications Ratings Rated current Rated voltage Features 1. Superior mating operability Secure mating and easy unmating is achieved
Miniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions (Example : LF07) 8.9 mm max. ( pos.). Oct..07 Copyright 07 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Ease of shielded
2.4mm coaxial connectors for frequency test measurements
2.4mm coaxial connectors for frequency test measurements 2.4mm Series Functional diagram Straight plug H2.4-P-SS085 Plug side Attenuator PlugJack H2.4-AT (**)-PJ ** 0, 3, 6, 10, 20dB Features 1. Complies
Miniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions (Example : LF07) 8.9 mm max. ( pos.). Sep..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Ease of shielded
Miniature Waterproof Shielded Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Miniature Push-Pull Circular Connectors
Miniature Push-Pull Circular Connectors HR2 Series Mated dimensions. pr..2 Copyright 2 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Features. Small high density Outer diameters - plugs (max): mm :, and
2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection
.5mm Pitch Connectors for Full Lock and Discrete Wire Connection DF1E Series UL, C-UL Listed Full lock function added Inner-lock system full lock mechanism Features 1. Full Lock Function dded The inner
Miniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions 8.9 mm max. ( pos.). Ø Receptacle Plug Short turn bayonet lock Features. Ease of shielded termination and connector assembly All components
75 Ω Small Coaxial Connectors (SMT Low Profile)
NEW 75 Ω Small Coaxial Connectors (SMT Low Profile) H.FL75 Series 75 ø, up to 3 GHz Figure Connector mating external view 6.5 Mar..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features.
1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
1.7mm pitch, Low Profile Wire-to-oard onnectors for Power Supplies DF Series (UL, -UL, Listed) Lock structure and operation Socket Latch Header Latches are deflected slightly during mating. Features 1.
Miniature Push-Pull Circular Connectors
Miniature Push-Pull Circular Connectors HR2 Series Mated dimensions.. Features. Small high density Outer diameters - plugs (max): mm :, and positions mm : 2, and positions 2. Simple push-in/ pull-out mating
High Power/Signal Connectors for Industrial Machinery
High Power/Signal Connectors for Industrial Machinery PQ Series Variations PQ50W Non water-resistant 20 position type Non water-resistant 48 position type Water-resistant 50 pos. type Contact (9A/pin)
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) DF Series Features 1. Correspond to oard Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header (1) Low
1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
Features 1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies DF65 Series 1. Enhanced contact reliability and lock structure The unique locking structure reinforces the engagement between
Plug-plug relay adapter. Mating interface shape. Jack -jack type BNC(75)-A-JJ(40) Jack-Jack relay adapter. Mating interface shape
NC 75Ω connector NC75 Series Dec..8 Copyright 8 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Functional diagram Plug side Straight plug Representative product : NC(75)-P-.5CV Cap CW-A/U(44) Short plug
0.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable
.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable DF8 Series Superb mating operability Features 1. Supports high speed connections The single row alignment utilizes a.5mm pitch to support
15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply
15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply DF63 Series (UL, C-UL, TÜV, Listed) Features 1. Rated for up to 15A DF63 has the capacity to handle a max of 15A when using 16 AWG wire.
5mm Pitch Miniature Potting Connectors for Secondary Power Supply
5mm Pitch Miniature Potting Connectors for Secondary Power Supply DF5 Series Single row type Features 1. Potting Product This connector is capable of potting 9mm maximum, and 22.5mm mounting height is
1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies
NEW 1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies DF65 Series (UL Pending) Lock structure and operation Socket Header Latch Latches are deflected slightly during mating. Features
2 2.2 mm Pitch, Wire-to-Wire Connectors for Small Spaces
2 2.2 mm Pitch, Wire-to-Wire Connectors for Small Spaces DF62 Series Compact shape due to 2 x 2.2 grid layout of pins *Both are 7 contacts with 3A current rating 16 16 Existing products DF62 Fig.1 Features
Modular Plug Connectors compliant to Cat.6 A Standard
Modular Plug Connectors compliant to Cat.6 A Standard TM3P Series Features. Support High-Speed LAN transmission Improved performance by two row contact arrangement. Conforms to Cat.6 A requirements of
DC to 2.5GHz Small Coaxial Switch
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features 1. Correspond to Board Design in Wide Variation Crimp Socket Receptacle Pin Header (1) Low profile
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height U.FL Series Up to 6GHz Mated height comparison (with E.FL series) 1.9 (MAX 2.) U.FL-LP(V)-4HF 2.3 (MAX 2.4) U.FL-LP-62HF
1.25mm Pitch Miniature Crimping Connector (UL Listed)
1.25mm Pitch Miniature Crimping Connector (UL Listed) DF13 Series Type Mounting Type Mounting Height(h) Features 1. Miniature Size Designed in the low profile at mounting height 5.8mm. (SMT mounting straight
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height U.FL Series Features 1. Nominal mated height of 1.9 or 2.3mm, 2.4mm (Max. 2. or 2.4mm, 2.5mm)(Fig.1) 2. Small mounting
2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Jul.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves
Modular Plug Connectors Compliant to Enhanced Category 5 Standards
Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM2P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height U.F Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) U.FP(V)HF. (MAX.) U.FPHF U.FP88HF. (MAX.) U.FPHF U.FPHF U.FP8HF
Modular Plug Connectors Compliant to Enhanced Category 5 Standards
Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM2P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B
CAT 6 Data Wiring System Connectors
CAT Data Wiring System Connectors TM23 Series Features 1. High-Speed Data Transfer Conforms to the TIA/EIA-58B.2-1 data Wiring standard, thereby clears CAT transfer performance requirements. As such, these
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) P(V) P(V)HF. (MAX.) P PHF P88 P88HF. (MAX.) P PHF P PHF P8HF
2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
2.mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard) DF1B Series Oct.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. New Insulation Displacement
0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm HighSpeed BoardtoBoard Connections FX11 Series Stacking height : 2mm Stacking height : 2.5mm, 3mm Features 1. Low Profile Design The boardtoboard
2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) P(V) P(V)HF. (MAX.) P PHF P88 P88HF. (MAX.) P PHF P PHF P8HF
Male Cable Connectors / Female Receptacles Male cable connector straight, with internal strain relief clamp and/or clamping ring, cable diameter 6-12,5 mm No. of contacts 3 + PE 3 + PE Termination technique
High Speed, Matched-Impedance, Parallel Board-to-board Connector System
NEW High Speed, Matched-Impedance, Parallel Board-to-board Connector System IT Series (2 required) IT Series Outline High-speed matched-impedance parallel board-to-board connector designed for applications
2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves the low profile.. Insulation Displacement Area Protected by
I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable
PRODUCT SPECIFICATION I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable P/N 20351-112R-37 P/N 20279-001E-01 RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw
Amphenol. Circular. Connectors C 16-1 / C Circular Connectors. Amphenol-Tuchel Electronics
Amphenol C 1-1 / C 1- Circular Circular Connectors Connectors Amphenol-Tuchel Electronics C 1-1 Overview No. of contacts + PE + PE Termination screw solder Wire gauge Rated insulation voltage Current carrying
2.54mm Pitch Bottom Entry Type Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Small Circular Connector. JN1/JN2 Series. Dust Cap
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Small Circular Connector JN1/JN2 Series Angle Plug CONNECTOR MB-0054-8 October 2009 [JN1] [JN2] [JN1] [JN2] Straight Plug Cable Connecting Individual Plug
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features Correspond to Board Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header In-line
Setting Standards Connectors M 16
Setting Standards Connectors M 16 inclusive 15 Product Overview 16 Housings page 18 Inserts page 22 Accessories page 29 Technical Data M 16 Control Signal Connectors Mechanical Data Housing Materials and
TNC SERIES General... 4 Interface... 5 Characteristics...6-7
CONTENTS PAGE TNC SERIES General... 4 Interface... 5 Characteristics...6-7 TNC 50 Ω SERIES Plugs...8-9 Jacks...0- Jacks and receptacles... Receptacles...-4 Adapters... 5 Caps... 6 TNC 75 Ω SERIES Plugs...
Miniature push-pull connectors with ground function
Miniature push-pull connectors with ground function MXR Series Features 1. User friendly lock mechanism The single action push-pull lock function allows quick connections and disconnections as well as
10+Gbps 0.8mm pitch Board to Board Connectors
NEW 1+Gbps.mm pitch oard to oard onnectors FX1 Series.mm Pitch Variations :oplanar / Vertical / Stacking Number of ontacts : / / / 1 / 1/ 1 Multi functional contact (MF contact) as; q ground contact to
I-PEX MHF3 Micro Coaxial Connector Mating Heigh: 1.5mm MAX
PRODUCT SPECIFICATION I-PEX MHF3 Micro Coaxial Connector Mating Heigh: 1.5mm MAX P/N 20367-001R P/N 20369-001E RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw Tel: +886-2-24239376
2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
P3-19 Series Connectors For Entertainment Lighting
Introduction P3-19 series connectors have been developed to offer the highest levels of reliability and safety. The super robust construction ensures continual and reliable operation. The rugged fully
Plastic Push-Pull Lock Connectors
Plastic Push-Pull Lock Connectors RP13 Series Product Specifications Ratings Rated current Rated voltage Features 1. Superior mating operability A secure mating condition is achieved by simply pushing
OUTLINE FEATURES SPECIFICATIONS MATERIAL/FINISH
OUTLINE IP Push-On CM1 series with -D has black trivalent chromium treatment and is a connector which is in compliance with RoHS directive. D type is a small sized waterproof circular connector with push
Maximum mated height 1.2mm, Micro Coaxial Connector K.FL2 Series
Connector mated condition Mated height comparison (compared to conventional company products) Fig.1 Features 1. A low mated height of 1.2mm max. When connected, K.FL2 delivers a world class low mated height
2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
2mm Double-Row Connector (Product Compliant to UL/CSA Standard) DF11 Series Features 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
SMB Connectors. Adaptors-50Ω. Plug to Plug. Jack to Jack. Plug to Jack. Bulkhead Jack to Jack
SMB Connectors Adaptors-50Ω Plug to Plug 1P-801-00 Jack to Jack 1P-802-00 Plug to Jack 1P-803-00 Bulkhead Jack to Jack 1P-804-18 Mini-SMB 75Ω Straight Plug 1P75-111-00 Cable group RG316 Straight PCB Jack
SECTION 5 SWITCHING CONNECTORS/MOEBIUS MC-CARD/RP-MCX R199/R299 SIMPLIFICATION IS OUR INNOVATON. Visit for more information
SECTION 5 SWITCHING CONNECTORS/MOEBIUS MC-CARD/RP-MCX R199/R299 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents Introduction... 5-4 to 5-5 MOEBIUS Characteristics...
242, , FAX.
TEL. 886 2 8994 1601, FAX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information SMA SMB Subminiature Connectors Screw Lock Subminiature Connectors Snap Lock 50 Ω 18 GHz
PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
1.0 SCOPE 1 of 8 E This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of the latest
Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height
Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.mm Mated Height U.FL Series Meets up to 6 GHz Requirement Mated Height Comparison (With Hirose Product) 1.9(2.0Max) U.FL-LP(V)-00 2.(2.5Max)
D Subminiature Combo D
Cable ( 8) Loose Contacts Coaxial 75 Ohm Stamped Crimp/Crimp Recommended Wire Trim Dimensions Kit (ody, Ferrule, Center Contact) Stamped Crimp/Crimp Kit Kit 30 in. Kit 50 in. RG Cable Number D130322-2
CAT 6 Data Wiring System Connectors
NEW CAT 6 Data Wiring System Connectors TM2 Series Features. High-Speed Data Transfer Conforms to the TIA/EIA-568B.2- data Wiring standard, thereby clears CAT 6 transfer performance requirements. As such,
2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard) DF1B Series Features 1. New Insulation Displacement and Crimping Ideas This connector is a new type to insert
PRODUCT SPECIFICATION
2.54mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 2.54mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
RFX. Type N RG58, 141, 142 Straight Plug Type N Connectors» Cable Straight. Jack 50 Ohm Yes
Please note: Images are for reference only Amphenol Part Number: Description: Product Series: Product Type: Connector Body Style: Gender: Impedance: RoHS Compliant: 082-5376-RFX RG58, 141, 142 Straight
EN2 SERIES SEALED CONNECTORS
FEATURES & BENEFITS Sealed to IP68, NEMA 250 (6P) (when mated) Available in standard or winged coupling ring Patented grommet and o-ring free design Solder/crimp and PC contact options APPLICATIONS Any
PRODUCT SPECIFICATION
0.8x1.2 mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 0.8x1.2mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug
USB 2.0-IP67 Water Resistant Connector System
Section 6 USB 2.0-IP67 Water Resistant Connector System CONEC completed its product line of bayonet locking series, IP67 rated industrial USB 2.0 connector system for harsh environments. The housing can
PRODUCT SPECIFICATION
2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
USS RF I plug Connector series
DOC. No.: 651-0089-01 Rev.: D Page: 1/10 1. Application This style products are designed for Mobile phones, Wireless LAN, Mini-PCI, Bluetooth, PDA, GPS, electronic measuring instruments, etc, LAN, Mini-PCI,,PDA,
Amphenol RF- BNC Connector Series
Page 1 of 7 enter part number Products 7/16 1.0/2.3 1.6/5.6 AMC BNC / RP-BNC C FAKRA SMB FME HN MCX Mini-UHF Mini 75 Ohm SMB MMCX Precision (APC) QDS QMA QWS SC SlimLine BNC SMA / RP-SMA SMB SMC SMP TNC
1.27mm Pitch Connector
1.27mm Pitch Connector FX1 Series DIN duplex density mount has been achieved. (DIN 96 contacts and FX1 192 (96x2) Photo 1 Features 1. High density and space saved-din Duplex Mount Achieved The alignment
SMB Connectors. RF Coax Connectors. Product Facts
SMB Connectors Product Facts SMB offers snap-fit coupling for quick connect/disconnect Choice of Commercial or High Rel Connectors 50 and 75 Ω MIL-Type connectors available Straight plugs and jacks are
.093 [2.36] Commercial Pin and Socket Connectors
![.093 [2.36] Commercial Pin and Socket Connectors](/thumbs/90/101430850.jpg ".093 [2.36] Commercial Pin and Socket Connectors")
.09 [.] Commercial Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold
Modular Jack Connector for High-Speed Transmission
All non-rohs products NEW have been discontinued, will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connects.com, contact your Hirose sales representative.
SIGNAL // POWER // INDUSTRIAL ETHERNET
CIRCULAR CONNECTORS SIGNAL // POWER // INDUSTRIAL ETHERNET 2 HUMMEL smart & reliable HUMMEL AG is a renowned manufacturer of connection technology and components for electric and heating areas. The medium
EP METAL TYPE - SOLDER ISO ASSEMBLY OF EP MALE ISO ASSEMBLY OF EP FEMALE
EP METAL TYPE - SOLDER The EP Series has set the standard in high performance speaker connectors. Apart from its durability and strength, it offers consistent superior power handling capabilities. Features:
SMA 50 Ohm Connectors Alphabetical Index INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE ON REQUEST
SMA 50 Ohm Connectors Alphabetical Index SMA Connectors - 50 Ohm Bulkhead Mount... 20 Custom Feedthroughs... 48 Dummy Loads... 37 End Launch... 16 Field Replaceable... 28 Flexible Cable... 8 In-Series
NEW. Automation Technology 768 series
Automation Technology 78 series Screw locking acc. to DIN EN 07--0 Degree of protection IP7 Moulded versions Easy Assembly Excellent EMC shielding (versions with shielding rings 0 ) Versions with shielding
SECTION 7 R114 / R115 / R116 / R117 / R112
SECTION 7 7 smb / SMB-LOCK / SMC R114 / R115 / R116 / R117 / R112 Contents SMB Introduction... 7-4 to 7-5 Interface... 7-6 Characteristics... 7-7 to 7-8 Plugs... 7-8 to 7-9 Jacks...7-9 to 7-10 Bulkhead
sealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
SERIESN50, COAXIAL CONNECTORS
SERIESN50, COAXIAL CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER N connectors are available with 50 and 75 impedance. The frequency range extends to 18 GHz, depending on the connector and cable type.
INTRODUCTION A WIDE STANDARD RANGE MANY FULL CRIMP MODELS LOW INTERMODULATION CONNECTORS
N INTROUCTION The new Radiall N series has been developed using the latest advances in connector design. These connectors are easy--to--use, highly reliable, innovative and are designed to meet the needs
Amphenol RF. Mini-BNC Mini-BNC Connectors. Mini-BNC. Description. Features/Benefits. Applications
Amphenol RF 100 Connectors Description Amphenol RF introduces the new generation of quality BNC connectors for the telecommunication and broadband applications for higher connector densities while preserving
6th digit. 5th digit. 4th digit. Code Specifications 3 20-bit absolute (standard) D 20-bit incremental (standard) Design Revision Order
Rotary s Model Designations - 3 D Series st+nd digits 3rd digit th digit th digit th digit 7th digit st+nd digits Rated Output th digit Serial Encoder 7th digit Options Code 3 3 W W 9 8 W 3.3 kw.8 kw 3.9
Miniature Interface Coaxial Switch, DC to 10 GHz
Miniature Interface Coaxial Switch, DC to 10 GHz MS-162B Series Features 1. Wide frequency range Applicable frequencies range from DC to 10 GHz. 2. Low insertion loss 0.15 db MAX (DC to 2 GHz) 0.2 db MAX
SPECIFICATION 宏致電子股份有限公司. No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.) TEL: FAX:
SPECIFICATION 宏致電子股份有限公司 Š ã 13 No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.) TEL: +886-3-463-2808 FAX: +886-3-463-1800 SPEC. NO.: PS-50208-XXXXX-XXX REVISION: E PRODUCT NAME:
369 Series Connectors
KEY FEATURES 3, 6 and 9 way configurations Based on existing ARINC 809 / EN4165 Composite materials Robust design Fully sealed cable and mating interface Mounting of inline with cable-tie Button latching
- UMP series : board to wire application
MMP INTRODUCTION RADIALL, the pioneer in SMT coaxial connectors with the MMS series, has become a world wide leader in this technology. Thanks to this SMT expertise, RADIALL now announces another breakthrough
.062 [1.57] Commercial Pin and Socket Connectors
![.062 [1.57] Commercial Pin and Socket Connectors](/thumbs/85/92583829.jpg ".062 [1.57] Commercial Pin and Socket Connectors")
.062 [1.57] ommercial Product Facts Polarized avity identification Low contact-mating force Dual locking lances Detent and positive locking ontacts available in brass and phosphor bronze with tin and gold
242, , FAX.
TEL. 886 2 8994 1601, AX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information Subminiature Connectors Subminiature Connectors Snap Lock 50 Ω 18 GHz 50 Ω 75 Ω 4 GHz 3 GHz
Push-On Lock, SMPM Coaxial Connectors in MIL Standard
Push-On Lock, SMPM Coaxial Connectors in MIL Standard SMPM Series Product Specifications Ratings Nominal characteristic impedance 50ø Rated frequency DC to 65GHz Compatible with 65GHz configurations Features
STANDARD COAXIAL CONNECTORS. Eco 7/16 series
STANDARD COAXIAL CONNECTORS Eco 7/16 series Eco 7/16 INTRODUCTION GENERAL Standard coaxial connectors Screw on coupling Compliant to CECC and IEC standards 50 Ω APPLICATIONS Broadcast RF components (filters,
Couplers with Connectors (H Type)
Couplers with Connectors (H Type) Nov. Copyright HIROSE ELECTRIC CO., LTD. All Rights Reserved. HDH Series HDH-83GHD HDH-3GH(4) HDH-93GHD(4) Product Specifications Ratings Frequency range (Note) Characteristic
Amphenol RF Interconnects BNC 31 Series Bayonet Lock RF Connector System
BNC 31 Series Bayonet Lock RF Connector System Materials Body/Finish /Nickel Centre MALE Centre FEMALE Phosphor Bronze Centre Finish Gold 30µ Insulator Delron/PBT Gasket Silicone Rubber Crimp s Annealed
2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)
![2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)](/thumbs/75/71817925.jpg "2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)")
2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin) DF59 Series DF59 floating amount ±0.5mm(X,Y, Z directions) Features Common to all
Electrical dielectric withstanding voltage. sea level Vrms Vrms m Vrms Vrms
Applications Mechanical and electrical interface between on-board civil avionics equipments and racks Standards Arinc 600 Characteristics Mechanical material finish aluminum alodine 00 shells alloy to
Amphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications
Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility
PRODUCT SPECIFICATION
MINI-FIT SR. SERIES 1.0 SCOPE This specification covers the 10.00 mm / (.394 in.) centerline tin and gold, silver plated connector series, single and dual row versions in wire to wire and wire to printed
2.92mm coaxial connectors based on MIL Specifications
2.92mm coaxial connectors based on MIL Specifications 2.92mm Series Functional diagram Straight plug HK-P-SF085 Plug side Features 1. 2.92mm coaxial connector based on MIL Specifications (MIL-STD-348B)