2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
|
|
|
- Noah Hicks
- 6 years ago
- Views:
Transcription
1 2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard) DF1B Series Features 1. New Insulation Displacement and Crimping Ideas This connector is a new type to insert the ID contacts in the case. Using this method, the following merits can be gained. 1 By using the ID contact and crimping contact together, different current capacity cables can be mixed in one case. 2 After connection, the contact can be replaced in excellent maintainability. 3 Because the insulation displacement area is protected by the case, high reliability can be assured. 4 Since the insulation displacement process can be performed only by replacing the applicator of the existing crimping machine, no expensive machine for insulation displacement is required. 2. Potting Header Available The high profile header is also available, corresponding to the board potting process (sealed with resin) as waterproof measures. 3. Broad Variations The single row and double row contacts are aligned for "Board to Cable" and "In-line" series, respectively, while standard tin and gold plating products are available. (Refer to the applicable combination pattern on next page.) Applications Business equipment, particularly including the copy machine and printer Cables with different current capacities can be mixed in one case Potting status ID terminal (AWG,, ) Crimping contact (AWG to ) Figure 1 Figure 2 B3
2 BApplicable Combination K Single Row Type Socket (Cable Side) DF1B-*S-2.5R Straight Through hole Type Pin header DF1B-*P-2.5DSA Right angle Through hole Type Pin header DF1B-*P-2.5DS Panel Mount Type In-line plug (Cable side) DF1BA-*EP-2.5RC K Double Row Type Socket (Cable Side) DF1B-*DS-2.5RC Straight Through hole Type Pin header DF1B-*DP-2.5DSA Right angle Through hole Type Pin header DF1B-*DP-2.5DS Panel Mount Type In-line plug (Cable side) DF1BA-*DEP-2.5RC In-line Connection Product (Cable to Cable Connection) : Full Lock Type K Single Row Type Socket (Cable Side) DF1B-*ES-2.5RC In-line plug (Cable side) DF1B-*EP-2.5RC K Double Row Type Socket (Cable Side) DF1B-*DES-2.5RC In-line plug (Cable side) DF1B-*DEP-2.5RC B4
3 Product Specifications Rating Current rating (Note1) Voltage rating AWG to : 3A AWG : 2A Cable Size AWG : 1A AWG : 0.5A 0V AC Operating Temperature Range Operating Moisture Range Storage Temperature Range Storage Moisture Range - to +85ç (Note2) - to 80% - to +60ç (Note3) - to 70% (Note3) Rating UL-CSA Safety Standard Standardized Value AWG to 22: 3A Current rating Cable Size AWG to : 1A (Note1) AWG : 0.5A Voltage rating V AC UL CSA Safety File No. UL : E553 CSA : LR959 Item Specification Condition 1. Insulation Resistance 0M ohms Min 500V DC 2. Withstanding voltage No flashover or insulation breakdown. 650V AC/1 minute 3. Contact Resistance m ohms Max ma 4. Insertor/Extraction Force MIN0.44N (45gf), MAX4.4N(450gf) Measure at the square steel pin of 0.6±0.002mm 5. Vibration No electrical discontinuity of 1µs or more Frequency: to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 6. Humidity (Steady state) Contact resistance: m ohms max.insulation resistance: 0M ohms min. 96 hours at temperature of ç and humidity of 90% to 95% 7. Temperature Cycle Contact resistance: m ohms max:insulation resistance: 0M ohms min. (-55ç: minutes to ç: 2 to 3 minutes (-85ç: minutes to ç: 2 to 3 minutes) 5 cycles 8. Operating Life Contact resistance: m ohms max. Tin plating : cycles Gold plating : 50 cycles 9. Resistance to Soldering heat No deformation of components affecting performance. Flow: 0ç for seconds Manual soldering: 0ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Material Product Part Material Finish Remarks Socket Insulator Polyamide White UL94V-0 ID Contact for Socket Contact Phosphor copper Tin plated or gold plated Crimping Contact for Socket Contact Phosphor copper Tin plated or gold plated Pin Header Insulator Polyamide White UL94V-0 Contact Brass Tin plated or gold plated In-line Plug Insulator Polyamide White UL94V-0 ID Contact for In-line Plug Contact Phosphor copper Tin plated or gold plated Crimping Contact for In-line Plug Contact Phosphor copper Tin plated or gold plated Note: The whisker method is implemented for tin plating. B5
4 Ordering Information KConnector DF1B - * S 2.5 RC q w e r t q Series Name : DF 1B w Number of Contacts Single Row : 2 to 16, 18, Double Row : 4 to, 34, KSocket ID Contact e Connector Type S DS P DP ES DES EP DEP : Single row socket : Double row socket : Single row pin header : Double row pin header : Single row in-line socket : Double row in-line socket : Single row in-line plug : Double row in-line plug DF1B - R F A q w e r r Contact Pitch: 2.5mm t Contact Type RC : ID/crimping socket (Note) DSA : Straight through hole DS : Right angle through hole Note: The single row socket DF1B-*S-2.5R only adds "R" to the tail, which has the same meaning as "RC". q 1. Connection Type R : ID w Applicable Cable Size : AWG : AWG : AWG e Packaging Type Blank : F : r Plating Type Blank : Tin plated A : Gold plated KPlug ID Contact DF1B - P R F B q w e r t q Applicable Cable Size : AWG : AWG : AWG w Connector Type P : Plug e Connection Type R : ID r Packaging Type Blank : F : t Plating Type Blank : Tin plated A : Gold plated KCrimping Contact DF1B - SCF A q w e q Applicable Cable Size 22 : AWG to 22 : AWG to : AWG w Packaging Type SCF : Socket Contact/ SC : Socket Contact/ PCF : Plug Contact/ PC : Plug Contact/ e Plating Type Blank : Tin plating A : Gold plated B : Gold plated (Note) Note: In case of the socket contact, "A" is attached to the tail of the product name. In case of the plug contact, "B" is attached thereto. B6
5 Single Row Socket Blank : pcs. per bag Photo: Contact Inserted Part Number DF1B- 2S-2.5R(**) DF1B- 3S-2.5R(**) DF1B- 4S-2.5R(**) DF1B- 5S-2.5R(**) DF1B- 6S-2.5R(**) DF1B- 7S-2.5R(**) DF1B- 8S-2.5R(**) DF1B- 9S-2.5R(**) DF1B-S-2.5R(**) Note1: The quantity at the specific No."None" is delivered by the bag unit ( pcs.). If needed, please order the product per bag. Note2: The 2 contact connector contains the convex portion to prevent mis-insertion in the center at one point, which is different from the above figure. The 3 to 7 contacts connectors have the area at both ends. Double Row Socket CL No. Number of Contacts A B ** ** ** ** ** ** ** ** ** Part Number CL No. Number of Contacts A B DF1B-11S-2.5R(**) DF1B-S-2.5R(**) DF1B-13S-2.5R(**) DF1B-14S-2.5R(**) DF1B-S-2.5R(**) DF1B-16S-2.5R(**) DF1B-18S-2.5R(**) DF1B-S-2.5R(**) ** ** ** ** ** ** ** ** Blank : pcs. per bag Photo: Contact Inserted. DF1B- 4DS-2.5RC(**) DF1B- 6DS-2.5RC(**) DF1B- 8DS-2.5RC(**) DF1B-DS-2.5RC(**) DF1B-DS-2.5RC(**) DF1B-14DS-2.5RC(**) DF1B-16DS-2.5RC(**) DF1B-18DS-2.5RC(**) DF1B-DS-2.5RC(**) ** ** ** ** ** ** ** ** ** DF1B-22DS-2.5RC(**) DF1B-DS-2.5RC(**) DF1B-DS-2.5RC(**) DF1B-DS-2.5RC(**) DF1B-DS-2.5RC(**) DF1B-34DS-2.5RC(**) DF1B-36DS-2.5RC(**) DF1B-DS-2.5RC(**) ** ** ** ** ** ** ** ** Note1: The quantity at the specific No. "None" is delivered by the bag unit ( pcs.) If needed, please order the product per bag. Note2: The 4 contact connector contains the convex portion to prevent miss-insertion in the center at one point, which is different from the above figure. B7
6 Single Row Straight Pin Header Blank: Tin plated (01) : Gold plated +0.1 KBoard Through-hole Diameter:Ø DF1B- 2P-2.5DSA(**) DF1B- 3P-2.5DSA(**) DF1B- 4P-2.5DSA(**) DF1B- 5P-2.5DSA(**) DF1B- 6P-2.5DSA(**) DF1B- 7P-2.5DSA(**) DF1B- 8P-2.5DSA(**) DF1B- 9P-2.5DSA(**) DF1B-P-2.5DSA(**) ** ** ** ** ** ** ** ** ** DF1B-11P-2.5DSA(**) DF1B-P-2.5DSA(**) DF1B-13P-2.5DSA(**) DF1B-14P-2.5DSA(**) DF1B-P-2.5DSA(**) DF1B-16P-2.5DSA(**) DF1B-18P-2.5DSA(**) DF1B-P-2.5DSA(**) ** ** ** ** ** ** ** ** Note 1.The quantity at the specific No. "None" is delivered by the bag unit ( pcs.) If needed, please order the product per bag. Note 2.The 2 and 3 contact connector contains the concave portion to prevent miss-insertion in the center at one point, which is different from the above figure.in addition, the 4 to 7 contact connectors have two concave portions at both ends. Single Row Right Angle Pin Header Blank: Tin plated (01) : Gold plated +0.1 K Board Through-hole Diameter:Ø DF1B- 2P-2.5DS(**) DF1B- 3P-2.5DS(**) DF1B- 4P-2.5DS(**) DF1B- 5P-2.5DS(**) DF1B- 6P-2.5DS(**) DF1B- 7P-2.5DS(**) DF1B- 8P-2.5DS(**) DF1B- 9P-2.5DS(**) DF1B-P-2.5DS(**) ** ** ** ** ** ** ** ** ** DF1B-11P-2.5DS(**) DF1B-P-2.5DS(**) DF1B-13P-2.5DS(**) DF1B-14P-2.5DS(**) DF1B-P-2.5DS(**) DF1B-16P-2.5DS(**) DF1B-18P-2.5DS(**) DF1B-P-2.5DS(**) ** ** ** ** ** ** ** ** Note 1.The quantity at the specific No. "None" is delivered by the bag unit ( pcs.). If needed, please order the product per bag. Note 2.The 4 and 6 contact connector contains the concave portion to prevent miss-insertion in the center at one point, which is different from the above figure. B8
7 Single Row Straight Pin Header for Potting B Tube Size Part Number CL No. Number of Contacts A B Tube Package Quantity DF1BD- 2P-2.5DSA(**) ** pieces DF1BD- 3P-2.5DSA(**) ** DF1BD- 4P-2.5DSA(**) ** 4 38 DF1BD- 5P-2.5DSA(**) ** 5 32 DF1BD- 6P-2.5DSA(**) ** 6 27 DF1BD- 7P-2.5DSA(**) ** 7 DF1BD- 8P-2.5DSA(**) ** 8 21 DF1BD- 9P-2.5DSA(**) ** 9 19 DF1BD-P-2.5DSA(**) ** 17 BApplicable Potting Thickness : 6mm Potting status +0.1 K Board Positioning Boss Hole Diameter:Ø K Board Through-hole Diameter:Ø Blank: Tin plated () : Tin plated, tube packaging Note 1.A packaging quantity is delivered by the bag unit ( pcs.). If needed, please order the product per pack. Note 2.Please order the tube packaging products, multiplying the packaging quantity (pieces). Note 3.The 2 and 3 contact connector contains the concave portion to prevent miss-insertion in the center at one point, which is different from the above figure.in addition, the 4 to 7 contacts connectors have two concave portions at both ends. B9
8 Double Row Straight Pin Header Blank: Tin plated (01) : Gold plated +0.1 Board Through-hole Diameter:Ø DF1B- 4DP-2.5DSA(**) DF1B- 6DP-2.5DSA(**) DF1B- 8DP-2.5DSA(**) DF1B-DP-2.5DSA(**) DF1B-DP-2.5DSA(**) DF1B-14DP-2.5DSA(**) DF1B-16DP-2.5DSA(**) DF1B-18DP-2.5DSA(**) ** ** ** ** ** ** ** ** DF1B-DP-2.5DSA(**) ** DF1B-22DP-2.5DSA(**) ** DF1B-DP-2.5DSA(**) ** DF1B-DP-2.5DSA(**) ** DF1B-DP-2.5DSA(**) ** DF1B-DP-2.5DSA(**) ** DF1B-34DP-2.5DSA(**) ** DF1B-DP-2.5DSA(**) ** Note 1.The quantity at the specific No. "None" is delivered by the bag unit ( pcs.). If needed, please order the product per bag. Note 2.The 4 and 6 contact connector contains the concave portion to prevent miss-insertion in the center area at one point, which is different from the above figure. Double Row Right Angle Pin Header Blank: Tin plated (01) : Gold plated +0.1 K Board Through-hole Diameter:Ø DF1B- 4DP-2.5DS(**) DF1B- 6DP-2.5DS(**) DF1B- 8DP-2.5DS(**) DF1B-DP-2.5DS(**) DF1B-DP-2.5DS(**) DF1B-14DP-2.5DS(**) DF1B-16DP-2.5DS(**) DF1B-18DP-2.5DS(**) DF1B-DP-2.5DS(**) ** ** ** ** ** ** ** ** ** DF1B-22DP-2.5DS(**) DF1B-DP-2.5DS(**) DF1B-DP-2.5DS(**) DF1B-DP-2.5DS(**) DF1B-DP-2.5DS(**) DF1B-34DP-2.5DS(**) DF1B-36DP-2.5DS(**) DF1B-DP-2.5DS(**) ** ** ** ** ** ** ** ** Note 1.The quantity at the specific No. "None" is delivered by the bag unit ( pcs.). If needed, please order the product per bag. Note 2.The 4 and 6 contact connector contains the concave portion to prevent miss-insertion in the center area at one point, which is different from the above figure. B160
9 Single Row In-line Plug(Simple Lock Type) KApplicable Socket: DF1B-*S-2.5R Blank: Tin plated (01) : Gold plated Contact Inserted. DF1BA- 2EP-2.5RC(**) ** DF1BA- 8EP-2.5RC** ** DF1BA- 3EP-2.5RC(**) ** DF1BA- 9EP-2.5RC** ** 9.6 DF1BA- 4EP-2.5RC(**) ** 4.1 DF1BA-EP-2.5RC** ** 27.1 DF1BA- 5EP-2.5RC(**) ** DF1BA-11EP-2.5RC** ** DF1BA- 6EP-2.5RC(**) ** DF1BA-EP-2.5RC** ** 32.1 DF1BA- 7EP-2.5RC(**) ** DF1BA-13EP-2.5RC** ** Note 1.The quantity at the specific No. "None" is delivered by the bag unit ( pcs.). If needed, please order the product per bag. Note 2.The 2 contacts connector contains the concave portion to prevent miss-insertion in the center area at one point, which is different from the above figure.in addition, the 3 to 7 contact connectors contain the concave portion at both sides. B Panel Cutouts C Applicable Plug Number of Contacts Panel Board Thickness (Note 1) 0.5 to to to 2.0 DF1BA- 2EP-2.5RC(**) DF1BA- 3EP-2.5RC(**) DF1BA- 4EP-2.5RC(**) DF1BA- 5EP-2.5RC(**) DF1BA- 6EP-2.5RC(**) DF1BA- 7EP-2.5RC(**) DF1BA- 8EP-2.5RC(**) DF1BA- 9EP-2.5RC(**) DF1BA-EP-2.5RC(**) DF1BA-11EP-2.5RC(**) DF1BA-EP-2.5RC(**) DF1BA-13EP-2.5RC(**) Note 1.The installation hole size C according to panel board thickness. Note 2.Fabricate installation holes so that no burr can occur. D B161
10 Double Row In-line Plug (Simple Lock Type) KApplicable Socket: DF1B-*DS-2.5RC Blank: pcs. per pack Contact Inserted. Part Number DF1BA- 4DEP-2.5RC(**) DF1BA- 6DEP-2.5RC(**) DF1BA- 8DEP-2.5RC(**) DF1BA-DEP-2.5RC(**) DF1BA-DEP-2.5RC(**) DF1BA-14DEP-2.5RC(**) DF1BA-16DEP-2.5RC(**) DF1BA-18DEP-2.5RC(**) CL No. Number of Contacts A B ** ** ** ** ** ** ** Note 1.The quantity at the specific No. "None" is delivered by the bag unit ( pcs.). If needed, please order the product per bag. Note 2.The 4 contacts connector contains the concave portion to prevent miss-insertion in the center at one point, which is different from the above figure. B Panel Cutouts CL No. Number of Contacts A B ** ** ** ** ** ** ** ** 18.1 Part Number DF1BA-DEP-2.5RC(**) DF1BA-22DEP-2.5RC(**) DF1BA-DEP-2.5RC(**) DF1BA-DEP-2.5RC(**) DF1BA-DEP-2.5RC(**) DF1BA-DEP-2.5RC(**) DF1BA-34DEP-2.5RC(**) Panel Applicable Plug DF1BA- 4DEP-2.5RC DF1BA- 6DEP-2.5RC DF1BA- 8DEP-2.5RC DF1BA-DEP-2.5RC DF1BA-DEP-2.5RC DF1BA-14DEP-2.5RC DF1BA-16DEP-2.5RC DF1BA-18DEP-2.5RC DF1BA-DEP-2.5RC DF1BA-22DEP-2.5RC DF1BA-DEP-2.5RC DF1BA-DEP-2.5RC DF1BA-DEP-2.5RC DF1BA-DEP-2.5RC DF1BA-34DEP-2.5RC Number of Contacts C Panel Board Thickness (Note 1) 0.5 to to to Note 1.The installation hole size C according to panel board thickness. Note 2.Fabricate installation holes so that no burr can occur. D B162
11 Single Row In-line Socket (Full Lock Type) KApplicable Socket: DF1B-*DEP-2.5RC Blank: pcs. per pack Contact Inserted. DF1B- 2ES-2.5RC DF1B- 8ES-2.5RC DF1B- 3ES-2.5RC DF1B- 9ES-2.5RC DF1B- 4ES-2.5RC DF1B-ES-2.5RC DF1B- 5ES-2.5RC DF1B-11ES-2.5RC DF1B- 6ES-2.5RC DF1B-ES-2.5RC DF1B- 7ES-2.5RC DF1B-13ES-2.5RC Note 1.The quantity at the specific No. "None" is delivered by the bag unit ( pcs.). If needed, please order the product per bag. B Panel Cutouts Panel Applicable Plug DF1B- 2ES-2.5RC DF1B- 3ES-2.5RC DF1B- 4ES-2.5RC DF1B- 5ES-2.5RC DF1B- 6ES-2.5RC DF1B- 7ES-2.5RC DF1B- 8ES-2.5RC DF1B- 9ES-2.5RC DF1B-ES-2.5RC DF1B-11ES-2.5RC DF1B-ES-2.5RC DF1B-13ES-2.5RC Number of Contacts C Note 1.The installation hole size C will be changed according to panel board thickness. Note 2.Fabricate installation holes so that no burr can occur. D E Panel Board Thickness (Note 1) 0.5 to to to B163
12 Double Row In-line Socket (Full Lock Type) KApplicable Socket: DF1B-*EP-2.5RC Blank: pcs. per pack Contact Inserted. DF1B-DES-2.5RC(**) DF1B-DES-2.5RC(**) DF1B-14DES-2.5RC(**) DF1B-16DES-2.5RC(**) DF1B-18DES-2.5RC(**) DF1B-DES-2.5RC(**) DF1B-22DES-2.5RC(**) ** ** ** ** ** ** ** DF1B-DES-2.5RC(**) DF1B-DES-2.5RC(**) DF1B-DES-2.5RC(**) DF1B-DES-2.5RC(**) DF1B-32DES-2.5RC(**) DF1B-34DES-2.5RC(**) ** ** ** ** ** ** Note 1.The quantity at the specific No. "None" is delivered by the bag unit ( pcs.). If needed, please order the product per bag. B Panel Cutouts Panel C Applicable Plug Number of Contacts Panel Board Thickness (Note 1) 0.5 to to to 2.0 DF1B-DES-2.5RC(**) DF1B-DES-2.5RC(**) DF1B-14DES-2.5RC(**) DF1B-16DES-2.5RC(**) DF1B-18DES-2.5RC(**) DF1B-DES-2.5RC(**) DF1B-22DES-2.5RC(**) DF1B-DES-2.5RC(**) DF1B-DES-2.5RC(**) DF1B-DES-2.5RC(**) DF1B-DES-2.5RC(**) DF1B-32DES-2.5RC(**) DF1B-34DES-2.5RC(**) Note 1.The installation hole size C according to panel board thickness. Note 2.Fabricate installation holes so that no burr can occur. D E B164
13 Single Row In-line Plug (Full Lock Type) KApplicable Socket: DF1B-*ES-2.5RC Blank: pcs. per pack Contact Inserted. DF1B- 2EP-2.5RC(**) ** DF1B- 8EP-2.5RC(**) ** DF1B- 3EP-2.5RC(**) ** DF1B- 9EP-2.5RC(**) ** 9.4 DF1B- 4EP-2.5RC(**) ** DF1B-EP-2.5RC(**) **.9 DF1B- 5EP-2.5RC(**) ** DF1B-11EP-2.5RC(**) ** DF1B- 6EP-2.5RC(**) ** DF1B-EP-2.5RC(**) ** 33.9 DF1B- 7EP-2.5RC(**) ** DF1B-13EP-2.5RC(**) ** Note 1.The quantity at the specific No. "None" is delivered by the bag unit ( pcs.). If needed, please order the product per bag. Double Row In-line Plug (Full Lock Type) KApplicable Socket: DF1B-*DES-2.5RC Blank: pcs. per pack Contact Inserted. DF1B-DEP-2.5RC(**) ** 17.2 DF1B-DEP-2.5RC(**) ** 34.7 DF1B-DEP-2.5RC(**) ** 19.7 DF1B-DEP-2.5RC(**) ** 37.2 DF1B-14DEP-2.5RC(**) ** DF1B-DEP-2.5RC(**) ** 39.7 DF1B-16DEP-2.5RC(**) ** 16.7 DF1B-DEP-2.5RC(**) ** 42.2 DF1B-18DEP-2.5RC(**) ** DF1B-32DEP-2.5RC(**) ** DF1B-DEP-2.5RC(**) ** 29.7 DF1B-34DEP-2.5RC(**) ** DF1B-22DEP-2.5RC(**) ** Note 1.The quantity at the specific No. "None" is delivered by the bag unit ( pcs.). If needed, please order the product per bag. B165
14 ID Contact for Socket Part Number CL No. DF1B-RF DF1B-R DF1B-RF DF1B-R DF1B-RF DF1B-R DF1B-RFA DF1B-RA DF1B-RFA DF1B-RA DF1B-RFA DF1B-RA Applicable Cable Indication AWG AWG AWG AWG AWG AWG AWG Applicable Cable UL Style Wire Construction Jacket Diameter K ID Contact Extraction Tool DF-C-PO (A) Note 1.The applicable cable conductor is the tin plated annealing copper wire. Note 2.If other cables are used instead of the applicable cable, cotact Hirose sales department. Crimping Contact for Socket cores./0.16mm 7 cores./0.16mm 7 cores./0.7mm 11 cores./0.16mm 7 cores./0.16mm 7 cores./0.7mm Packaging Type Quantity Finish Tin plated Gold plated Part Number DF1B-22SCF DF1B-22SC DF1B-SCF DF1B-SC DF1B-SCF DF1B-SC DF1B-22SCFA DF1B-22SCA DF1B-SCFA DF1B-SCA DF1B-SCFA DF1B-SCA CL No Applicable Cable Indication 22 K Crimping Contact Extraction Tool DF-C-PO (B) 22 K Applicable Cable (Tin Plated Annealing Copper Wire) Conductor Size (Wire construction) AWG (21cores/0.18mm) AWG22 (17cores/0.16mm) AWG (11cores/0.16mm) AWG (7cores/0.16mm) AWG (7cores0.7mm) AWG (7cores/0.1mm) Applicable Cable AWG Jacket Diameter AWG to AWG to 1.9mm AWG to AWG 0.9 to 1.5mm AWG AWG to AWG 22 AWG to AWG AWG 0.6 to 1.2mm 1.2 to 1.9mm 0.9 to 1.5mm 0.6 to 1.2mm Packaging Type Quantity K Recommended Cable UL61, UL7 K Strip Length 2.0 to 2.5mm Note:If other cables are used instead of the applicable cable, consult Hirose sales department. Finish Tin plated Gold plated B166
15 ID Contact for Plug Part Number DF1B-PRF DF1B-PR DF1B-PRF DF1B-PR DF1B-PRF DF1B-PR DF1B-PRFB DF1B-PRB DF1B-PRFB DF1B-PRB DF1B-PRFB DF1B-PRB CL No Applicable Cable Indication AWG AWG AWG AWG AWG AWG AWG Applicable Cable UL Style Wire structure Jacket Diameter K ID Contact Extraction Tool DF-C-PO (C) Note 1.The applicable cable conductor is the tin plated annealing copper wire. Note 2.If other cables are used instead of the applicable cable, contact Hirose sales department. Crimping Contact for Plug pcs./0.16mm 7 pcs./0.16mm 7 pcs./0.7mm 11 pcs./0.16mm 7 pcs./0.16mm 7 pcs./0.7mm Packaging Type Quantity Finish Tin plated Gold plated Part Number CL No. Applicable Cable AWG Jacket Diameter DF1B-22PCF DF1B-PCF AWG to AWG to DF1B-22PC DF1B-PC AWG 22 AWG 1.2 to 1.9mm 0.9 to 1.5mm DF1B-PCF DF1B-PC AWG 0.6 to 1.2mm DF1B-22PCFB DF1-PDSCFB AWG to AWG to DF1B-22PCB DF1-PDSCB AWG 22 AWG 1.2 to 1.9mm 0.9 to 1.5mm DF1B-PCFB DF1B-PCB AWG 0.6 to 1.2mm K Crimping Contact Extraction Tool DF-C-PO (C) K Applicable Cable (Tin Plated Annealing Copper Wire) Conductor Size (Contact wire construction) AWG (21 pieces/0.18mm) AWG22 (17 pieces/0.16mm) AWG (11 pieces/0.16mm) AWG (7 pieces/0.16mm) AWG (7 pieces/0.7mm) AWG (7 pieces/0.1mm) Packaging Type Quantity Treatment Tin plated Gold plated K Recommended Cable UL61, UL7 K Strip Length 3.0 to 3.7mm Note:If other cables are used instead of the applicable cable, consult Hirose sales department. B167
![B Applicable Tool [Press Main Unit and Applicator] [Manual Crimping Tool] Connection Type Type Part Number CL No.](/docs-images/77/75904062/images/16-0.jpg "Applicable Contacts ID Applicator AP5-DF1B-R 901-4507-4 DF1B-R**F/FA **=,, AP5-DF1B-PR 901-4536-2 DF1B-**PRF/PRFB**=,, Manual ID tool DF1B-THR 550-0171-0 DF1B-R**/A **=,, DF1B-TPHR 550-0221-7")
16 B Applicable Tool [Press Main Unit and Applicator] [Manual Crimping Tool] Connection Type Type Part Number CL No. Applicable Contacts ID Applicator AP5-DF1B-R DF1B-R**F/FA **=,, AP5-DF1B-PR DF1B-**PRF/PRFB**=,, Manual ID tool DF1B-THR DF1B-R**/A **=,, DF1B-TPHR DF1B-**PR/PRB **=,, AP5-DF1B-22S DF1B-22SCF/SCFA AP5-DF1B-S DF1B-SCF/SCFA Applicator AP5-DF1B-S DF1B-SCF/SCFA AP5-DF1B-22P DF1B-22PCF/PCFB AP5-DF1B-P DF1B-PCF,DF1-PDSCF/SCFB Crimping AP5-DF1B-P DF1B-PCF/PCFB DF1B-TA22SHC DF1B-22SC/SCA DF1B-TASHC DF1B-SC/SCA Manual DF1B-TASHC DF1B-SC/SCA crimping tool DF1B-TA22PHC DF1B-22PC/PCB DF1B-TAPHC DF1B-PC,DF1-PDSCB DF1B-TAPHC DF1B-PC/PCB Press Main Unit CM DF-C-PO(A) DF1B-R**F Extraction Tool DF-C-PO(B) DF1B-****SCF DF-C-PO(C) DF1B-****PC,DF1B-**PRF Note: If a trouble has occurred due to tools which are not designated by Hirose, Hirose won't guarantee any product B168
17 B Applicable Tool BPrecautions 1. Recommended Soldering Condition Flow: 0ç for 3 seconds Manual soldering: 290ç for 2 seconds 2. Cleaning Condition Refer to Nylon Connector Use Hand book. 3. Connection Condition Refer to Nylon Connector Use Hand book. 4. Cautions The color phase of this product is slightly different from that of the formed product according to the manufacturing lot and future storage conditions, but the difference doesn't affect the performance. B169
2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
2.mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard) DF1B Series Oct.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. New Insulation Displacement
2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves the low profile.. Insulation Displacement Area Protected by
2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
2mm Double-Row Connector (Product Compliant to UL/CSA Standard) DF11 Series Features 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Jul.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features Correspond to Board Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header In-line
5mm Pitch Miniature Potting Connectors for Secondary Power Supply
5mm Pitch Miniature Potting Connectors for Secondary Power Supply DF5 Series Single row type Features 1. Potting Product This connector is capable of potting 9mm maximum, and 22.5mm mounting height is
1.25mm Pitch Miniature Crimping Connector (UL Listed)
1.25mm Pitch Miniature Crimping Connector (UL Listed) DF13 Series Type Mounting Type Mounting Height(h) Features 1. Miniature Size Designed in the low profile at mounting height 5.8mm. (SMT mounting straight
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features 1. Correspond to Board Design in Wide Variation Crimp Socket Receptacle Pin Header (1) Low profile
2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection
.5mm Pitch Connectors for Full Lock and Discrete Wire Connection DF1E Series UL, C-UL Listed Full lock function added Inner-lock system full lock mechanism Features 1. Full Lock Function dded The inner
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) DF Series Features 1. Correspond to oard Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header (1) Low
2.54mm Pitch Bottom Entry Type Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply
15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply DF63 Series (UL, C-UL, TÜV, Listed) Features 1. Rated for up to 15A DF63 has the capacity to handle a max of 15A when using 16 AWG wire.
2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
1.27mm Pitch Connector
1.27mm Pitch Connector FX1 Series DIN duplex density mount has been achieved. (DIN 96 contacts and FX1 192 (96x2) Photo 1 Features 1. High density and space saved-din Duplex Mount Achieved The alignment
2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
2 2.2 mm Pitch, Wire-to-Wire Connectors for Small Spaces
2 2.2 mm Pitch, Wire-to-Wire Connectors for Small Spaces DF62 Series Compact shape due to 2 x 2.2 grid layout of pins *Both are 7 contacts with 3A current rating 16 16 Existing products DF62 Fig.1 Features
1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
Features 1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies DF65 Series 1. Enhanced contact reliability and lock structure The unique locking structure reinforces the engagement between
1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies
NEW 1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies DF65 Series (UL Pending) Lock structure and operation Socket Header Latch Latches are deflected slightly during mating. Features
1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
1.7mm pitch, Low Profile Wire-to-oard onnectors for Power Supplies DF Series (UL, -UL, Listed) Lock structure and operation Socket Latch Header Latches are deflected slightly during mating. Features 1.
Modular Plug Connectors compliant to Cat.6 A Standard
Modular Plug Connectors compliant to Cat.6 A Standard TM3P Series Features. Support High-Speed LAN transmission Improved performance by two row contact arrangement. Conforms to Cat.6 A requirements of
High Speed, Matched-Impedance, Parallel Board-to-board Connector System
NEW High Speed, Matched-Impedance, Parallel Board-to-board Connector System IT Series (2 required) IT Series Outline High-speed matched-impedance parallel board-to-board connector designed for applications
0.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable
.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable DF8 Series Superb mating operability Features 1. Supports high speed connections The single row alignment utilizes a.5mm pitch to support
Miniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions 8.9 mm max. ( pos.). Ø Receptacle Plug Short turn bayonet lock Features. Ease of shielded termination and connector assembly All components
Small-sized, plastic type, push-pull lock connectors
Small-sized, plastic type, push-pull lock connectors RP17 Series Product Specifications Ratings Rated current Rated voltage Features 1. Superior mating operability Secure mating and easy unmating is achieved
Modular Plug Connectors Compliant to Enhanced Category 5 Standards
Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM2P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B
Miniature Waterproof Shielded Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
High Power/Signal Connectors for Industrial Machinery
High Power/Signal Connectors for Industrial Machinery PQ Series Variations PQ50W Non water-resistant 20 position type Non water-resistant 48 position type Water-resistant 50 pos. type Contact (9A/pin)
sealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
Modular Plug Connectors Compliant to Enhanced Category 5 Standards
Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM2P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B
45Amp,10.16 mm pitch, Board to Wire Connector for Internal Power Supply
45Amp,10.16 mm pitch, Board to Wire Connector for Internal Power Supply DF60 Series (UL, C-UL, TÜV certified product) Figure 1 Features 1. High current capacity Capable of going to a max. of 45A when using
DC to 2.5GHz Small Coaxial Switch
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
45Amp,10.16 mm pitch, Board to Wire Connector for Internal Power Supply
45Amp,10.16 mm pitch, Board to Wire Connector for Internal Power Supply DF60 Series (UL, C-UL, TÜV certified product) Features 1. High current capacity Capable of going to a max. of 45A when using AWG
.093 [2.36] Commercial Pin and Socket Connectors
![.093 [2.36] Commercial Pin and Socket Connectors](/thumbs/90/101430850.jpg ".093 [2.36] Commercial Pin and Socket Connectors")
.09 [.] Commercial Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold
PRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
Push-on Bayonet Lock Miniature Waterproof Connectors
Push-on ayonet Lock Miniature Waterproof Connectors HR34 Series Push-on ayonet Lock Mating : Just inserting plug unit will complete mating Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights
CAT 6 Data Wiring System Connectors
NEW CAT 6 Data Wiring System Connectors TM2 Series Features. High-Speed Data Transfer Conforms to the TIA/EIA-568B.2- data Wiring standard, thereby clears CAT 6 transfer performance requirements. As such,
PRODUCT SPECIFICATION
2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
CAT 6 Data Wiring System Connectors
CAT Data Wiring System Connectors TM23 Series Features 1. High-Speed Data Transfer Conforms to the TIA/EIA-58B.2-1 data Wiring standard, thereby clears CAT transfer performance requirements. As such, these
2.4mm coaxial connectors for frequency test measurements
2.4mm coaxial connectors for frequency test measurements 2.4mm Series Functional diagram Straight plug H2.4-P-SS085 Plug side Attenuator PlugJack H2.4-AT (**)-PJ ** 0, 3, 6, 10, 20dB Features 1. Complies
Miniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions (Example : LF07) 8.9 mm max. ( pos.). Oct..07 Copyright 07 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Ease of shielded
PRODUCT SPECIFICATION
MINI-FIT SR. SERIES 1.0 SCOPE This specification covers the 10.00 mm / (.394 in.) centerline tin and gold, silver plated connector series, single and dual row versions in wire to wire and wire to printed
COMPONENT SPECIFICATION M20 SERIES CONNECTORS AUGUST 2016 CONTENTS: SECTION TITLE PAGE. 1 Description of Connector and Intended Application 2
AUGUST 2016 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Gauges 5 APPENDICES NOTES: 1. Third angle projection
2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR R PC board layout (viewed from component side) and Assembly layout
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Secure locking device Solder crack preventive material Low insertion force Insertion guide mechanism Applicable to automatic board
Miniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions (Example : LF07) 8.9 mm max. ( pos.). Sep..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Ease of shielded
YL CONNECTOR. 1Certified LR R Specifications. Standards. 4.5mm pitch/disconnectable Crimp style Wire-to-wire connectors
.mm pitch/disconnectable Crimp style Wire-to-wire connectors Panel lock Inner lock lance Specifications Current rating: 0A AC, DC max. (A when retainers are mounted) Voltage rating: 00V AC, DC max. Temperature
Modular Jack Connector for High-Speed Transmission
All non-rohs products NEW have been discontinued, will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connects.com, contact your Hirose sales representative.
10+Gbps 0.8mm pitch Board to Board Connectors
NEW 1+Gbps.mm pitch oard to oard onnectors FX1 Series.mm Pitch Variations :oplanar / Vertical / Stacking Number of ontacts : / / / 1 / 1/ 1 Multi functional contact (MF contact) as; q ground contact to
PRODUCT SPECIFICATION
2.54mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 2.54mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) P(V) P(V)HF. (MAX.) P PHF P88 P88HF. (MAX.) P PHF P PHF P8HF
75 Ω Small Coaxial Connectors (SMT Low Profile)
NEW 75 Ω Small Coaxial Connectors (SMT Low Profile) H.FL75 Series 75 ø, up to 3 GHz Figure Connector mating external view 6.5 Mar..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features.
XA CONNECTOR. 1Certified LR R
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Specifications Current rating: 3 A AC DC (AWG #22, #20) Voltage rating: 250 V AC DC Temperature range: -25 C to +85 C (including
AMPLIMITE Cable Connectors and Shielding Hardware Kits
AMPLIMITE Cable Connectors and Shielding Hardware Kits Quick Reference Guide We offer one of the broadest, most versatile portfolios of D-subminiature connectors in the market with unrivaled engineering
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. EPower Connectors 4.20mm (.165") Pitch Mini-Fit Plus Terminal 46083 Crimp,
AVX Wire-to-Board Connectors
AVX Wire-to-Board Connectors www.avx.com Version 11.11 Table of Contents INSULATION DISPLACEMENT CONNECTORS (IDC) WIRE TO BOARD (WTB) DISCRETE WIRE IDC SERIES 9175...................................................................................
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) P(V) P(V)HF. (MAX.) P PHF P88 P88HF. (MAX.) P PHF P PHF P8HF
Connector MACHINE PIN SOCKET EMS SERIES FEATURES SPECIFICATIONS KINDS OF BASE
MACHINE PIN SOCKET EMS SERIES Connector FEATURES Funnel shaped four-fingered and six-fingered contacts provide easy IC insertion and withdrawal, high reliability Gold plated contact to ensure low contact
2mm Pitch 2 Piece Battery Connector. Horizontal/Vertical
FEATURES Low profile battery connectors (GF21/GF22/GF31 only) with 2.6mm (.12") height. 2 piece type with a highly reliable connection Sequence connection (FMLB : First Mate Last Break, 1 pin only) is
PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
1.0 SCOPE 1 of 8 E This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of the latest
Poke-Home: Horizontal AWG: WTB INTER CONNECT APPLICATIONS FEATURES AND BENEFITS ELECTRICAL MECHANICAL ENVIRONMENTAL HOW TO ORDER 00X
The new 9276 series connector provides a quick and reliable wire-toboard termination in a sleek 2.5mm pitch SMT package for a broad range of industrial and commercial markets. With almost every product
SBS Connectors - up to 110 amps
Connectors - up to 1 amps NEW 75G 75X Wire to Wire The patented connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact with live circuits.
I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable
PRODUCT SPECIFICATION I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable P/N 20351-112R-37 P/N 20279-001E-01 RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Insulator Color 9 = UL White 8 = UL Black Special Order
The market and applications for simple and reliable discrete Wire-to-Board connectors continue to evolve. AVX first introduced the 9175 series of surface mountable Insulation Displacement Connectors (IDC)
M22 Connectors Specification
Specification 2mm pitch, with 0.5mm square male pin connection system. oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Jumper socket: Male: Finish: Electrical
PRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
M20 Connectors Specification
Specification mm pitch, with 0.64mm square male pin connection system. mm (.100") PITCH oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Male: Finish: Electrical
PRODUCT SPECIFICATION
EC No: UC2018-0645 1.0 SCOE This roduct Specification covers the performance requirements and test methods of Micro-Fit 3.00 mm (.118 inch) centerline (pitch) wire to board and wire to wire connector systems
PRODUCT SPECIFICATION
0.8x1.2 mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 0.8x1.2mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug
SINGLE POLE SOCKETS - SOLDER MOUNT
SINGLE POLE SOCKETS - SOLDER MOUNT 450 - XXXX - XX - XX - 00 Body Brass Copper* Spring Beryllium Copper (Heat Treated) Dash Body Spring RoHS -03 Gold over Nickel Gold over Nickel -04 Electro-Tin Electro-Tin
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 0XX. Wire Gauge Size. Code Accepted Wire Cap Code Wire Gauge Insulation Pages 6-7
The 917X series of surface mount Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from
SBS Connectors - up to 110 amps
SBS Connectors - up to 11 amps SBS 75G SBS 75X Wire to Wire The patented SBS connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Gauge Size
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height U.FL Series Features 1. Nominal mated height of 1.9 or 2.3mm, 2.4mm (Max. 2. or 2.4mm, 2.5mm)(Fig.1) 2. Small mounting
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height U.F Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) U.FP(V)HF. (MAX.) U.FPHF U.FP88HF. (MAX.) U.FPHF U.FPHF U.FP8HF
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height U.FL Series Up to 6GHz Mated height comparison (with E.FL series) 1.9 (MAX 2.) U.FL-LP(V)-4HF 2.3 (MAX 2.4) U.FL-LP-62HF
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. D 3.00 to 7.92mm (.118 to.312") Pitch FEATURES AND SPECIFICATIONS Features
Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height
Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.mm Mated Height U.FL Series Meets up to 6 GHz Requirement Mated Height Comparison (With Hirose Product) 1.9(2.0Max) U.FL-LP(V)-00 2.(2.5Max)
Amphenol. Circular. Connectors C 16-1 / C Circular Connectors. Amphenol-Tuchel Electronics
Amphenol C 1-1 / C 1- Circular Circular Connectors Connectors Amphenol-Tuchel Electronics C 1-1 Overview No. of contacts + PE + PE Termination screw solder Wire gauge Rated insulation voltage Current carrying
PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS
BOARD/WIRE-TO-BOARD CONNECTORS PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS Minitek Headers for Pin-in-Paste Processes OVERVIEW Minitek is FCI s brand for board-to-board and wire/cableto-board connectors
Standard AWG: WTB
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
Coaxial Line Stretchers
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
ENVIRONMENTAL. Operating Temperature: -40ºC to +130ºC. Wire Size. Code Accepted Max Wire Gauge Insulation AWG Solid or Stranded
Wire-to-Wire (WTW) connectors have been used in the industrial market for years with traditional 2-Piece (plug & socket) connector systems. These require crimp and poke wire terminations to connect discrete
Spring Loaded Contacts
Spring Loaded Contacts Contents ATE Spring Probes Specifications One Part Probes Two Part Probes Spring Loaded Contacts Specifications Spring Loaded Contact Connectors Single Spring Loaded Contacts SMT
Operating Temperature: -40ºC to +125ºC 6XX. Wire Gauge Size
AVX developed the initial SMT discrete wire IDC connector 5 years ago for 26-28AWG AVX wires. Since then, we have seen this Wire-to-Board (WTB) contact technology spread to multiple wire gauges and multiple
Amphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications
Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility
Galvanometer Scanner Driver GVD0 Series Instruction Manual
CX5-091 Sep. 2018 Ver. 6.1 Galvanometer Scanner Driver GVD0 Series Instruction Manual CITIZEN CHIBA PRECISION CO., LTD. 1 Contents Preface.2 1. Specification..3 2. Product Overview..4 3. Input / Output
SB 50 Connectors - up to 120 amps
Connectors - up to 120 amps Based off the design pioneered by Anderson in 1953, APP s two pole SB connectors set the standard for DC power distribution and battery connections. connectors feature a one
D-subminiature Metal Shell Crimp and Poke, Right-Angle and Vertical PCB D*U Series
Crimp and Poke, Right-Angle and Vertical PCB Offered in 9, 15, 25, 37, and 50 position plugs and sockets (except right-angle PCB connectors- 9, 15, and 25 positions). FEATURES Available with gold flash
Amphenol AssembleTech. Contents. Mini Cool Edge IO (MCIO) Cable Assemblies. Amphenol AssembleTech Technical Datasheet
Contents Introduction........ 2 Description Features and Benefits Applications Industry Standards Technical Documents Part Numbers.......3 Table 1. Cable Connector Part Number Selection Guide Product Specifications........
MX150L tm INDUSTRIAL SEALED CONNECTOR SYSTEM
MX150L tm INDUSTRIAL SEALED CONNECTOR SYSTEM The MX150L Industrial Sealed Connector System is IP67 rated and conforms to UL 1977, but it is NOT suitable for automotive applications with requirements such
PRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 1.27 mm (.050 inch) centerline (pitch) printed circuit board (PCB) modular jack connector series with selective gold and tin plating. 2.0 PRODUCT DESCRIPTION
Qualification Test Report SlimSeal SSL Connector
Qualification Test Report SlimSeal SSL Connector 501-134042 6/26/15 Rev A 1. INTRODUCTION 1.1 Purpose Testing was performed on the TE Connectivity SlimSeal SSL Connector to determine its conformance to
VersaBlade Wire-to-Wire Connection System
VersaBlade Wire-to-Wire Connection System VersaBlade Wire-to-Wire Connection System For Home Appliance Contents 0 Product Overview 05 Feature and Benefits 0 Specifications 07 Mating Structure Ordering
RWZ CONNECTOR. 1Certified LR Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
Disconnectable Crimp style Wire-to-wire connectors In unit connection, this RWZ connector is a hybrid type double row drawer connector with combined signal and power supply circuits, absorbs misalignment
Contents. Mini Cool Edge IO (MCIO) Cable Assemblies. Amphenol AssembleTech Technical Datasheet
Contents Introduction........ 2 Description Features and Benefits Applications Industry Standards Technical Documents Part Numbers.......3 Table 1. Cable Connector Part Number Selection Guide Product Specifications........
Standard I/O, 15 Position
The 9157 series was specifically designed for portable equipment. AVX now offers this two-part system as a standard product. The fixed SMT socket is designed to be housed within the confined dimensional
Poke-Home Thru-Wire: WTW
Wire-to-Wire connectors have been used in the industrial market for years with traditional 2-Piece (plug and socket) connector systems which require crimp and poke wire terminations to connect electrical
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 5XX. Wire Gauge Size
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
SECTION 14. DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214
SECTION 14 14 DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214 Contents DIN 1.0/2.3 Introduction... 14-4 Interface... 14-4 Characteristics Eco... 14-5 Plugs Eco... 14-6 Jacks Eco... 14-6
Plug-plug relay adapter. Mating interface shape. Jack -jack type BNC(75)-A-JJ(40) Jack-Jack relay adapter. Mating interface shape
NC 75Ω connector NC75 Series Dec..8 Copyright 8 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Functional diagram Plug side Straight plug Representative product : NC(75)-P-.5CV Cap CW-A/U(44) Short plug
CF Series AXC5/AXC6. FEATURES 1. Vertical mating type with a 0.8 mm mated height low profile design
For board-to-micro coaxial wire Micro coaxial connectors (Low profile) AC5/AC6 CF Series 2. with strong resistance to various environments provides high contact reliability and facilitates connection work