High Speed, Matched-Impedance, Parallel Board-to-board Connector System
|
|
|
- Aubrey Cunningham
- 5 years ago
- Views:
Transcription
1 NEW High Speed, Matched-Impedance, Parallel Board-to-board Connector System IT Series (2 required) IT Series Outline High-speed matched-impedance parallel board-to-board connector designed for applications requiring board-toboard spacing with transmission speeds exceeding GHz. The connection system has matched impedance of 5 ohm or can be customized. Contacts are on.5mm pitch. Features. Impedance Matching using a 4-Layer Board The innovative transmission module uses PC boards with a strip line design of transmission lines, providing matched impedance of 5 ohms, for standard product. 2. Supports Multiple Connectors per board Designed with a tolerance of +/-.2mm for both the X and Y-axis. The three-piece structure and the +/-.2mm tolerance allows 3 or more IT s to be mounted on a single board. 3. Customized Board-to-Board Distance Board-to-board distance can be customized, from 6mm to 4mm. lines or additional traces can be added to support high level, high speed transmission or mixed power/signal applications. 4. to Ratio The standard signal-to-ground ratio is :2, which makes reliable matching of the characteristic impedance of each transmission line. This ratio also can be customized. 5. Contact Reliability Use of double contact points on each of the contacts assures highly reliable performance. (.95) : Wipe (.2): Wipe pplications Transmission Module Connection Cross-Sectional Diagram 2-Point contact 4-Layer board (Impedance matching) Transmission Module 2-Point contact Routers, servers, base stations and other telecommunication equipment. 23.2
2 Product Specifications Current.4 (Note ) rating Rating Voltage 5V C rating Operation Temperature Range Operation Humidity Range -55ç to +85ç Relative humidity 95% max. (No condensation) Storage Temperature Range Storage Humidity Range -ç to +6ç (Note 2) 4% to 7% (Note 2). Insulation resistance 2. Withstanding voltage 3. Contact resistance 4. Vibration 5. Shock 6. Humidity resistance 7. Temperature cycle 8. Durability (insertion/ withdrawal) 9. Resistance to 9. Soldering Heat Item Specification Conditions M ohms min. No flashover or insulation breakdown m ohms max. No electrical discontinuity of µs or more. No damage, cracks, or parts dislocation. No electrical discontinuity of µs. min. No damage, cracks, or parts dislocation Contact resistance: m ohms max. Insulation resistance: M ohms min. No damage, cracks, or parts dislocation Contact resistance: m ohms max. Insulation resistance: M ohms min. No damage, cracks, or parts dislocation Contact resistance: m ohms max. No damage, cracks, or parts dislocation. No deformation of components affecting performance. IT # - * S - SV (* *) Measured at V DC 5 V C/one minute Measured at m Frequency of to 55 Hz,.75mm single amplitude, for cycles in each of 3 directions cceleration of 49 m/s 2, ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis. 96 hours/4ç/ humidity of 9% to 95% Temperature: -55ç/ +5ç to +35ç/ +85ç/ +5ç to +35ç Duration: 3 / 2 to 3 / 3 / 2 to 3 (Minutes) 5 cycles 2 cycles Reflow: t the recommended temperature profile Manual soldering: 3ç for 3 seconds Note: If the connector is going to be used at a current in excess of the.4, please contact your Sales Representative. Note2: The term storage refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. Note3: Contact resistance is for the 9mm stacking height assemblies. Material s Part Insulator Contacts Metal fittings Transmission Module Part Insulator Board Ordering information s Material Finish Remarks LCP Phosphor bronze Phosphor bronze Color : Beige Gold plating flash Tin plating UL94V Material Finish Remarks PBT FR-4 Color : Black Contact portion : Gold plating flash UL94V Transmission Module IT - * P / * - *H Series name : IT Locating Post type Blank : With Locating Post : Without Locating Post Number of contacts : 68, 252 Connector S : Socket P : Transmission Plug Module Lead SV : Straight SMT Packaging Blank : Tray (25) : Tray(connectors with attached tape for a vacuum board placement) Number of ground contacts : 28, 44 Board-to-board Distance: 9mm,23mm,3mm 2
3 s - 68 Contacts 2.5 (=.5 4) (=.5 4).2 ±.5 b b2 b b a 8.8 ±.5 a84 a2 a 2± ±.5 6±.5 (.6) (52) (3.55) 6.7±.5 2-(Ø.5 mm): Locating Post Part Number CL No. Locating Post Type IT-68S-SV With Locating Post IT-68S-SV Without Locating Post BRecommended PCB mounting pattern ± ( =.5 4) ( =.5 4).3 ±.2 b b 2 b ± a 84 a 2 a 2-Ø.7±.5 Not required for products without Locating Post. 3
4 s Contacts 2.5 (=.5 4) (=.5 4) (=.5 4) b26 a26.2 ± b2 b a2 b a a C.5 2± ± ±.5 6±.5 ( 75.5 ) 84.2 ±.5 (.6 ) ( 3.55 ) 2-(Ø.5 mm): Locating Post Part Number CL No. Locating Post Type IT-252S-SV With Locating Post IT-252S-SV Without Locating Post BRecommended PCB mounting pattern B 3 +. b ( =.5 4) (=.5 4) ± (=.5 4) b 2 b a 26 a 2 a 2- Ø.7 ±.5..B Not required for products without locating Post. 4
5 Transmission Module - 68 Contacts b row a row (4.2) 7.8 ±.5 57±.5 55± ±.3 Mating side Board Mounting side Locking Protrusion (2 Sides) 56± ± ± ± ±.5 CL No. Part Number Board-to-board Distance B C CL IT-68P/28-9H 9mm CL IT-68P/28-3H 3mm Connection Table The connection table indicates contact numbers in the mated condition,as illustrated in Fig.. Fig. a row a - a84 a44 - a4 a2 - a83 a3 - a82 a4 - a8 a5 - a8 a53 - a32 a6 - a79 a54 - a3 a7 - a78 a55 - a3 a8 - a77 a56 - a29 a7 - a68 a65 - a2 a8 - a67 a66 - a9 a9 - a66 a67 - a8 a2 - a65 a68 - a7 a29 - a56 a77 - a8 a3 - a55 a78 - a7 a3 - a54 a79 - a6 a32 - a53 a8 - a5 a8 - a4 a82 - a3 a83 - a2 a4 - a44 a84 - a a42 - a43 a43 - a42 b row b - b84 b44 - b4 b2 - b83 b3 - b82 b4 - b8 b5 - b8 b53 - b32 b6 - b79 b54 - b3 b7 - b78 b55 - b3 b8 - b77 b56 - b29 b7 - b68 b65 - b2 b8 - b67 b66 - b9 b9 - b66 b67 - b8 b2 - b65 b68 - b7 b29 - b56 b77 - b8 b3 - b55 b78 - b7 b3 - b54 b79 - b6 b32 - b53 b8 - b5 b8 - b4 b82 - b3 b83 - b2 b4 - b44 b84 - b b42 - b43 b43 - b42 5
6 Transmission Module Contacts 2-row type b row 7.8±.5 a row (4.2) Mating side Board Mounting side ± ± ±.3.4 ±.3.6 ±.5 5.8±.3 Locking Protrusion (2 Sides) 79.5 ±.3 5.8±.3 CL No. Part Number Board-to-board Distance B C CL IT-252P/44-23H 23mm CL IT-252P/44-3H 3mm Connection Table The connection table indicates contact numbers in the mated condition,as illustrated in Fig.. Fig. a row a - a26 a44 - a83 a86 - a4 a5 - a22 a53 - a74 a95 - a32 a6 - a2 a54 - a73 a96 - a3 a7 - a2 a55 - a72 a97 - a3 a8 - a9 a56 - a7 a98 - a29 a7 - a a62 - a65 a7 - a2 a8 - a9 a63 - a64 a8 - a9 a9 - a8 a64 - a63 a9 - a8 a2 - a7 a65 - a62 a - a7 a29 - a98 a7 - a56 a9 - a8 a3 - a97 a72 - a55 a2 - a7 a3 - a96 a73 - a54 a2 - a6 a32 - a95 a74 - a53 a22 - a5 a4 - a86 a83 - a44 a26 - a a42 - a85 a84 - a43 a43 - a84 a85 - a42 b row b - b26 b44 - b83 b86 - b4 b5 - b22 b53 - b74 b95 - b32 b6 - b2 b54 - b73 b96 - b3 b7 - b2 b55 - b72 b97 - b3 b8 - b9 b56 - b7 b98 - b29 b7 - b b62 - b65 b7 - b2 b8 - b9 b63 - b64 b8 - b9 b9 - b8 b64 - b63 b9 - b8 b2 - b7 b65 - b62 b - b7 b29 - b98 b7 - b56 b9 - b8 b3 - b97 b72 - b55 b2 - b7 b3 - b96 b73 - b54 b2 - b6 b32 - b95 b74 - b53 b22 - b5 b4 - b86 b83 - b44 b26 - b b42 - b85 b84 - b43 b43 - b84 b85 - b42 6
7 Packaging, Tools s Tray Dimensions (68 contacts tray shown) (33) (C5) B C (8.5) (66.5=8.5 9) (225) Number of contacts B C Q'ty per Tray 4 3 Vacuum Pick-up Tape Dimensions Vacuum Tape (3) (7) BIT Series Extraction Tool (6) Part Number CL No. Remarks IT-PICKER() piece Package (.25) (Ø2.5) (3) (42) (6) 7
8 BRecommended Temperature Profile 5sec.max Board Surface Temperature (ç) pplicable Conditions Reflow system : IR reflow Solder : Paste type 63 Sn/37 Pb : (Flux component 9 wt%) Test board : Glass epoxy 85 x x.6 mm Metal mask thickness :.5 mm Start (6sec.) 6 to 9sec. Preheating (3sec.) (2 to 3sec.) Soldering This is a recommended temperature profile. It may vary somewhat depending on the type and amount of solder paste. Time (Seconds) BCleaning Conditions Organic Solvent Cleaning Solvent Type Normal temperature Heated IP (Isopropyl alcohol) HCFC (Hydrochlorofluorocarbon) Water Based Cleaning When using water based cleaning agents (e.g., terpene, and alkali saponifiers), select the cleaning agent based on the documentation issued by the various manufacturers of cleaning agents which describes the effects on metals and resins. Care should be taken not to leave any moisture on connector assemblies. Cleaning Precautions Residual flux or cleaning agent remaining on the connectors when using organic solvents or water type cleaners may deteriorate electrical performance. It is critical to dry parts completely. BConnector Handling Precautions. Effective mating length (Wipe) The mating length of this product is.2 mm for contacts and.95 mm for B contacts. Please use a range of values from the setting value to the setting value plus.6 mm for the stacking height. 2. Mounting between Boards void supporting the boards only with connectors. Use other mechanical supports. 3. Solder Repair Flux coating at the time of repair can result in the flux wicking up to the contact areas of the connector. This can cause poor contact. The connector should be cleaned in accordance with the recommendations above. 4. Connector Mating Structure IT Series connectors are designed as a 3-piece assembly comprising of 2 receptacles and a single transmission module. The transmission module has mating side and a fixed side. Once the fixed side has been inserted, it cannot be removed without a tool. Having one side of the transmission module fixed in this assembly, allows repeated mating/unmating of the other side. Mating side: HRS logo Mating side(moveable) Removable C side Transmission Module Fixed side(stationary) Edge 8
9 5. Connector Mating Procedure Install the receptacle on PCB(Reflow soldering) DO NOT USE transmission module in soldering process. Step Mate the fixed side of the transmission module in the installed connector. Caution: Check that the fixed side is oriented in the proper direction. Mating side 68 Transmission module Fixed side 9 (Mounted) Board Step 2 Mate the removable connector side on the transmission module.this connector can be mated/unmated repeatedly. 68 Transmission module fixed in receptacle 6. Connector Unmating DO NOT REMOVE one side only or ''wiggle'' side-to-side. 68 9
10 7. Removing the Transmission Module To remove the fixed side of a mated transmission module, use dedicated tools, IT-Ejection Tool and remove the transmission module according to the procedure of the diagram below. Step Use the IT-Ejection Tool to release the latch formed by the receptacle's tabs on metal fitting. IT-PICKER()-Ejection Tool 68 Step 2 Pull out the transmission module when tabs are in the released condition. Ejection Tool Lock Tab 68 Metal Fitting 8. Miscellaneous Depending on the manufacturing lot there may be slight differences in color shades of the insulator materials. The form, fit and function of the interconnection system is not affected.
0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm HighSpeed BoardtoBoard Connections FX11 Series Stacking height : 2mm Stacking height : 2.5mm, 3mm Features 1. Low Profile Design The boardtoboard
0.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable
.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable DF8 Series Superb mating operability Features 1. Supports high speed connections The single row alignment utilizes a.5mm pitch to support
10+Gbps 0.8mm pitch Board to Board Connectors
NEW 1+Gbps.mm pitch oard to oard onnectors FX1 Series.mm Pitch Variations :oplanar / Vertical / Stacking Number of ontacts : / / / 1 / 1/ 1 Multi functional contact (MF contact) as; q ground contact to
2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies
NEW 1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies DF65 Series (UL Pending) Lock structure and operation Socket Header Latch Latches are deflected slightly during mating. Features
2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
Features 1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies DF65 Series 1. Enhanced contact reliability and lock structure The unique locking structure reinforces the engagement between
2.54mm Pitch Bottom Entry Type Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection
.5mm Pitch Connectors for Full Lock and Discrete Wire Connection DF1E Series UL, C-UL Listed Full lock function added Inner-lock system full lock mechanism Features 1. Full Lock Function dded The inner
1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
1.7mm pitch, Low Profile Wire-to-oard onnectors for Power Supplies DF Series (UL, -UL, Listed) Lock structure and operation Socket Latch Header Latches are deflected slightly during mating. Features 1.
Modular Jack Connector for High-Speed Transmission
All non-rohs products NEW have been discontinued, will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connects.com, contact your Hirose sales representative.
1.25mm Pitch Miniature Crimping Connector (UL Listed)
1.25mm Pitch Miniature Crimping Connector (UL Listed) DF13 Series Type Mounting Type Mounting Height(h) Features 1. Miniature Size Designed in the low profile at mounting height 5.8mm. (SMT mounting straight
75 Ω Small Coaxial Connectors (SMT Low Profile)
NEW 75 Ω Small Coaxial Connectors (SMT Low Profile) H.FL75 Series 75 ø, up to 3 GHz Figure Connector mating external view 6.5 Mar..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features.
5mm Pitch Miniature Potting Connectors for Secondary Power Supply
5mm Pitch Miniature Potting Connectors for Secondary Power Supply DF5 Series Single row type Features 1. Potting Product This connector is capable of potting 9mm maximum, and 22.5mm mounting height is
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) DF Series Features 1. Correspond to oard Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header (1) Low
PRODUCT SPECIFICATION
2.54mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 2.54mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features 1. Correspond to Board Design in Wide Variation Crimp Socket Receptacle Pin Header (1) Low profile
PRODUCT SPECIFICATION
2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
1.27mm Pitch Connector
1.27mm Pitch Connector FX1 Series DIN duplex density mount has been achieved. (DIN 96 contacts and FX1 192 (96x2) Photo 1 Features 1. High density and space saved-din Duplex Mount Achieved The alignment
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features Correspond to Board Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header In-line
PRODUCT SPECIFICATION
0.8x1.2 mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 0.8x1.2mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug
Modular Plug Connectors Compliant to Enhanced Category 5 Standards
Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM2P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B
2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
2mm Double-Row Connector (Product Compliant to UL/CSA Standard) DF11 Series Features 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) P(V) P(V)HF. (MAX.) P PHF P88 P88HF. (MAX.) P PHF P PHF P8HF
2.4mm coaxial connectors for frequency test measurements
2.4mm coaxial connectors for frequency test measurements 2.4mm Series Functional diagram Straight plug H2.4-P-SS085 Plug side Attenuator PlugJack H2.4-AT (**)-PJ ** 0, 3, 6, 10, 20dB Features 1. Complies
DC to 2.5GHz Small Coaxial Switch
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) P(V) P(V)HF. (MAX.) P PHF P88 P88HF. (MAX.) P PHF P PHF P8HF
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height U.FL Series Features 1. Nominal mated height of 1.9 or 2.3mm, 2.4mm (Max. 2. or 2.4mm, 2.5mm)(Fig.1) 2. Small mounting
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height U.FL Series Up to 6GHz Mated height comparison (with E.FL series) 1.9 (MAX 2.) U.FL-LP(V)-4HF 2.3 (MAX 2.4) U.FL-LP-62HF
Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height
Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.mm Mated Height U.FL Series Meets up to 6 GHz Requirement Mated Height Comparison (With Hirose Product) 1.9(2.0Max) U.FL-LP(V)-00 2.(2.5Max)
Modular Plug Connectors Compliant to Enhanced Category 5 Standards
Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM2P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B
Modular Plug Connectors compliant to Cat.6 A Standard
Modular Plug Connectors compliant to Cat.6 A Standard TM3P Series Features. Support High-Speed LAN transmission Improved performance by two row contact arrangement. Conforms to Cat.6 A requirements of
2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves the low profile.. Insulation Displacement Area Protected by
15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply
15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply DF63 Series (UL, C-UL, TÜV, Listed) Features 1. Rated for up to 15A DF63 has the capacity to handle a max of 15A when using 16 AWG wire.
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height U.F Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) U.FP(V)HF. (MAX.) U.FPHF U.FP88HF. (MAX.) U.FPHF U.FPHF U.FP8HF
2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Jul.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves
Initial release of document
This specification covers the requirements for application of SMT Poke In Connectors for use on printed circuit (pc) board based LED strip lighting typically used for sign lighting. The connector accommodates
PRODUCT SPECIFICATION
MINI-FIT SR. SERIES 1.0 SCOPE This specification covers the 10.00 mm / (.394 in.) centerline tin and gold, silver plated connector series, single and dual row versions in wire to wire and wire to printed
Miniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions 8.9 mm max. ( pos.). Ø Receptacle Plug Short turn bayonet lock Features. Ease of shielded termination and connector assembly All components
For board-to-fpc. Narrow pitch connectors (0.4mm pitch)
Automation Controls Catalog For board-to-fpc Narrow pitch connectors (0.4mm pitch) A4F Series 3.0mm 2.4mm RoHS compliant FEATURES 1. 0.6 mm mated height low profile two-piece type connector 2. Space-saving
Small-sized, plastic type, push-pull lock connectors
Small-sized, plastic type, push-pull lock connectors RP17 Series Product Specifications Ratings Rated current Rated voltage Features 1. Superior mating operability Secure mating and easy unmating is achieved
For board-to-fpc. Narrow pitch connectors (0.4mm pitch)
Automation Controls Catalog For board-to-fpc Narrow pitch connectors (0.4mm pitch) F4 Series 5.0mm 4.1mm RoHS compliant FEATURES 1. 0.9 mm mated height low profile two-piece type connectors 2. Strong resistance
Push-on Bayonet Lock Miniature Waterproof Connectors
Push-on ayonet Lock Miniature Waterproof Connectors HR34 Series Push-on ayonet Lock Mating : Just inserting plug unit will complete mating Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights
- UMP series : board to wire application
MMP INTRODUCTION RADIALL, the pioneer in SMT coaxial connectors with the MMS series, has become a world wide leader in this technology. Thanks to this SMT expertise, RADIALL now announces another breakthrough
2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard) DF1B Series Features 1. New Insulation Displacement and Crimping Ideas This connector is a new type to insert
2 2.2 mm Pitch, Wire-to-Wire Connectors for Small Spaces
2 2.2 mm Pitch, Wire-to-Wire Connectors for Small Spaces DF62 Series Compact shape due to 2 x 2.2 grid layout of pins *Both are 7 contacts with 3A current rating 16 16 Existing products DF62 Fig.1 Features
Maximum mated height 1.2mm, Micro Coaxial Connector K.FL2 Series
Connector mated condition Mated height comparison (compared to conventional company products) Fig.1 Features 1. A low mated height of 1.2mm max. When connected, K.FL2 delivers a world class low mated height
Miniature Waterproof Shielded Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
FPC CONNECTORS Y3FT (0.3 mm pitch) with FPC tabs
AYF31 FPC CONNECTORS FOR FPC CONNECTION FPC CONNECTORS Y3FT (0.3 mm pitch) with FPC tabs (Former Name: YF31) FEATURES 1. Low-profile, space-saving design (pitch: 0.3mm) The 0.9mm height, 3.0mm depth contributes
CF Series AXC5/AXC6. FEATURES 1. Vertical mating type with a 0.8 mm mated height low profile design
For board-to-micro coaxial wire Micro coaxial connectors (Low profile) AC5/AC6 CF Series 2. with strong resistance to various environments provides high contact reliability and facilitates connection work
PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
1.0 SCOPE 1 of 8 E This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of the latest
2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
2.mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard) DF1B Series Oct.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. New Insulation Displacement
PRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 1.27 mm (.050 inch) centerline (pitch) printed circuit board (PCB) modular jack connector series with selective gold and tin plating. 2.0 PRODUCT DESCRIPTION
For FPC. FPC connectors (0.3mm pitch) Back lock
Automation Controls Catalog For FPC FPC connectors (0.3mm pitch) Back lock Y3BL Series New FEATURES 1. Slim and low profile design (Pitch: 0.3 mm) The Y3BL is a 0.6 mm low-profile connector with a back-lock
CAT 6 Data Wiring System Connectors
CAT Data Wiring System Connectors TM23 Series Features 1. High-Speed Data Transfer Conforms to the TIA/EIA-58B.2-1 data Wiring standard, thereby clears CAT transfer performance requirements. As such, these
Microwave Coaxial Connectors
!Note Please read rating and!cution (for storage and operating, rating, soldering and mounting, handling) in in this PDF catalog catalog to prevent to prevent smoking smoking and/or and/or burning, burning,
For FPC. FPC connectors (0.3mm pitch) Back lock
0.9 For FPC FPC connectors (0.3mm pitch) Back lock AYF33 Y3B/Y3BW Series New Y3B Y3BW is added. FEATURES 1. Slim and low profile design (Pitch: 0.3 mm) Back lock type and the slim body with a 3.15 mm depth
FPC connectors (0.3mm pitch) Front lock with FPC tabs
AYF31 For FPC FPC connectors (0.3mm pitch) Front lock with FPC tabs Y3FT Series FEATURES 1. Low-profile, space-saving design (pitch: 0.3mm) The 0.9mm height, 3.0mm depth contributes to the miniaturization
PRODUCT SPECIFICATION
i TM / i+ TM 0.8 mm PITCH I/O CONNECTOR SYSTEM of TABLE OF CONTENTS.0 SCOPE... 3.0 PRODUCT DESCRIPTION... 3. PRODUCT NAME AND SERIES NUMBER(S)... 3. DIMENSION, MATERIALS, PLATING AND MARKINGS... 3.3 SAFETY
For FPC. FPC connectors (0.2mm pitch) Back lock
0.9 For FPC FPC connectors (0.2mm pitch) Back lock Y2B Series AYF21 New FEATURES 1. Slim and low profile design (Pitch: 0.2 mm) 0.2 mm pitch back lock design and the slim body with a 3.15 mm depth (with
Handling Precaution for Terminal and Connector
1 Handling Precaution for Terminal and Connector Handling Precaution for Terminal and Connector This manual is to describe basic precautions for use of terminal and connector in the following. Make use
PRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable
PRODUCT SPECIFICATION I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable P/N 20351-112R-37 P/N 20279-001E-01 RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw
SPECIFICATION 宏致電子股份有限公司 桃園縣中壢市東園路 13 號. No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.)
SPECIFICATION 宏致電子股份有限公司 桃園縣中壢市東園路 13 號 No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.) TEL: +886-3-463-2808 FAX: +886-3-463-1800 SPEC. NO.: PS-50208-XXXXX-XXX REVISION: J PRODUCT
CAT 6 Data Wiring System Connectors
NEW CAT 6 Data Wiring System Connectors TM2 Series Features. High-Speed Data Transfer Conforms to the TIA/EIA-568B.2- data Wiring standard, thereby clears CAT 6 transfer performance requirements. As such,
HAMBURG INDUSTRIES CO., LTD.
SPECIFICATION OF IC CARD ACCEPTOR Model No.: ICA-607 Revision: 1.0 Issue Date: Oct.15, 2001 HAMBURG INDUSTRIES CO., LTD. 6FL., No.12, Lane 270, Sec. 3, Pei Shen Rd., Shen Keng Hsiang, Taipei Hsien, Taiwan
By using this Adapter a connection between Socket and Emulator or programming device can be easily achieved.
Series Introduction QFP-Production Use Socket and Emulation-Adapter YAMAICHI's IC149-Series is available in many different formats, from 44 pins to 240 pins. It is designed to fit most of the common semiconductors
Qualification Test Report SlimSeal SSL Connector
Qualification Test Report SlimSeal SSL Connector 501-134042 6/26/15 Rev A 1. INTRODUCTION 1.1 Purpose Testing was performed on the TE Connectivity SlimSeal SSL Connector to determine its conformance to
PAGE 1/6 ISSUE Jul SERIES Micro-SPDT PART NUMBER R516 XXX 10X R 516 _ 1 0 _
PAGE 1/6 ISSUE Jul-24-2017 SERIES Micro-SPDT PART NUMBER R516 XXX 10X R516 series: the RAMSES concept merges with the SLIM LINE technology, breaking up the frequency limits of SMT switches : - FULL SMT
SPECIFICATION 宏致電子股份有限公司. No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.) TEL: FAX:
SPECIFICATION 宏致電子股份有限公司 Š ã 13 No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.) TEL: +886-3-463-2808 FAX: +886-3-463-1800 SPEC. NO.: PS-50208-XXXXX-XXX REVISION: E PRODUCT NAME:
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPECIFICATIONS Features and enefits Exceeds Category 5 performance
SECTION 5 SWITCHING CONNECTORS/MOEBIUS MC-CARD/RP-MCX R199/R299 SIMPLIFICATION IS OUR INNOVATON. Visit for more information
SECTION 5 SWITCHING CONNECTORS/MOEBIUS MC-CARD/RP-MCX R199/R299 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents Introduction... 5-4 to 5-5 MOEBIUS Characteristics...
PRODUCT SPECIFICATION
1 of 8 1.0 SCOPE 3 2.0 APPLICABLE DOCUME T...3 3.0 REQUIREME TS.3 4.0 RATI GS 3 5.0 E VIRO ME TAL PERFORMA CE.4 MECHA ICAL PERFORMA CE. 5 6.0 PRODUCT QUALIFICATIO A D REQUALIFICATIO TEST SEQUE CE 8 2 of
PRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
CLICK HERE TO GO BACK TO PART NUMBER OVERVIEW. QFP/TQFP - 64 Pins (10x10) 0.5mm pitch. Detail C. Detail B
QFP/TQFP - 64 Pins (10x10) 0.5mm pitch Withstanding Voltage: 100V eff Solvent Durability: Freon Part Number (Details) IC149-064 - *69 - B5 B5 = Au over Ni Not available Detail C 10mm x 10mm N1 Detail B
PAGE 1/6 ISSUE SERIES Micro-SPDT PART NUMBER R516 XXX 10X. (All dimensions are in mm [inches]) R 516 _ 1 0 _
![PAGE 1/6 ISSUE SERIES Micro-SPDT PART NUMBER R516 XXX 10X. (All dimensions are in mm [inches]) R 516 _ 1 0 _](/thumbs/96/127769340.jpg "PAGE 1/6 ISSUE SERIES Micro-SPDT PART NUMBER R516 XXX 10X. (All dimensions are in mm [inches]) R 516 _ 1 0 _")
PAGE 1/6 ISSUE 15-10-18 SERIES Micro-SPDT PART NUMBER R516 XXX 10X R516 series: the RAMSES concept merges with the SLIM LINE technology, breaking up the frequency limits of SMT switches : - FULL SMT TECHNOLOGY
Amphenol Amphenol Taiwan Corporation Sheet 1 of 14
Amphenol Amphenol Taiwan Corporation Sheet 1 of 14 Title: Part Number: Description: USB3.0 Connector Product Specification GSB34 / GSB35 series Micro Family, Receptacle, SMT, PCB mount Revisions Control
PRODUCT SPECIFICATION
ipass TM 0.8 mm PITCH I/O CONNECTOR REVISION: ECR/ECN INFORMATION: EC No: UCP200-137 DATE: 200 / 02 / 08 TITLE: 1 of 14 TABLE OF CONTENTS 1.0 SCOPE 3 2.0 PRODUCT DESCRIPTION 3 2.1 PRODUCT NAME AND SERIES
15 + Gbps 0.5mm pitch Stacking Connectors
Housing Metal fitting 15 + Gbps.5mm pitch Stacking Connectors FX1 Series Electrical Interface for the OIF 1G Long-Haul DWDM Transmission Module (MSA-1GLH) With GND Plate Type Ground plate and metal fitting
3M IDC Ribbon Cable Socket. Series 891
78-51-- Rev A 1 of 8 M IDC Ribbon Cable Socket Series 891 Product Specification 78-51-- Released: 9-7-11 Austin, TX 7876-9 78-51-- Rev A of 8 Table of Contents Section Page 1. Scope........ M Customer
MAG-MATE* Series 300 Terminals
MAG-MATE* Series 300 Terminals Application Specification 114-2046 28 NOV 18 Rev AB All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches].
COMPONENT SPECIFICATION M20 SERIES CONNECTORS AUGUST 2016 CONTENTS: SECTION TITLE PAGE. 1 Description of Connector and Intended Application 2
AUGUST 2016 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Gauges 5 APPENDICES NOTES: 1. Third angle projection
High Power/Signal Connectors for Industrial Machinery
High Power/Signal Connectors for Industrial Machinery PQ Series Variations PQ50W Non water-resistant 20 position type Non water-resistant 48 position type Water-resistant 50 pos. type Contact (9A/pin)
CEELOK FAS-T* High-Speed Circular Connector System
CEELOK FAS-T* High-Speed Circular Connector System Application Specification 114-32025 02 APR 12 NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are
Microwave Coaxial Connectors
O0E.pdf 07.9. Microwave Coaxial Connectors Ultra Miniature SMT HSC Type Features 1. The mating height is only 1.2mm maximum by new mechanical design. Suitable for low profile design. 2. New mating mechanical
PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS
BOARD/WIRE-TO-BOARD CONNECTORS PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS Minitek Headers for Pin-in-Paste Processes OVERVIEW Minitek is FCI s brand for board-to-board and wire/cableto-board connectors
.093 [2.36] Commercial Pin and Socket Connectors
![.093 [2.36] Commercial Pin and Socket Connectors](/thumbs/90/101430850.jpg ".093 [2.36] Commercial Pin and Socket Connectors")
.09 [.] Commercial Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold
PRODUCT SPECIFICATION
SMT SHIELDED JACKS W.E. TYPE SYSTEM 1.0 SCOPE This specification covers the Molex shielded W.E. type product line which comprises a shield plug (male) and a jack (female) I/O type connector. This system
M22 Connectors Specification
Specification 2mm pitch, with 0.5mm square male pin connection system. oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Jumper socket: Male: Finish: Electrical
M20 Connectors Specification
Specification mm pitch, with 0.64mm square male pin connection system. mm (.100") PITCH oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Male: Finish: Electrical
Serial ATA (SATA) Connector
Product 108-51052 Specification PRE: Tay Aik Poh 20 MAY 11 Rev G APP: Leong See Fan DCR No. D20110520030314_706049 Serial ATA (SATA) Connector 1.0 SCOPE This specification covers the requirements for product
MX150L tm INDUSTRIAL SEALED CONNECTOR SYSTEM
MX150L tm INDUSTRIAL SEALED CONNECTOR SYSTEM The MX150L Industrial Sealed Connector System is IP67 rated and conforms to UL 1977, but it is NOT suitable for automotive applications with requirements such
Product Data Sheet. 3M Serial Advanced Technology Attachment (SATA) Boardmount Plug, Receptacle and Cable Assemblies
PD-0033 Product Data Sheet 3M Serial Advanced Technology Attachment (SATA) Boardmount Plug, Receptacle and Cable Assemblies 3 Electronic Solutions Division Page: 1 of 12 Table of Contents 1.0 Scope...2
10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cable-to-board and cable-to-cable applications with protection up to IP 65 / IP 67. At the same time, applications up to
Qualification Test Report Mini-Universal MATE-N-LOK* Connector
Qualification Test Report Mini-Universal MATE-N-LOK* Connector 501-589 21 May 12 Rev B 1. INTRODUCTION 1.1. Purpose 1.2. Scope Testing was performed on the Tyco Electronics Mini-Universal MATE-N-LOK* Connectors
Wire Wound Chip Inductors LPI0805FT Series
INTRODUCTION Product : LPI Miniature SMD Inductor For Power Line Size : 0805 The LPI series are low profile inductor used in notebook, PC, cellular phone backlight, inverter and etc. The devices are designed
AVX Wire-to-Board Connectors
AVX Wire-to-Board Connectors www.avx.com Version 11.11 Table of Contents INSULATION DISPLACEMENT CONNECTORS (IDC) WIRE TO BOARD (WTB) DISCRETE WIRE IDC SERIES 9175...................................................................................
Solder Tine Terminal Crimp Wire Terminal. Retention Barb Carrier Strip. Wire Lead-In. Slotted Beams Housing (Customer Supplied) Figure 1
MAG-MATE* Series 187 Terminals Application Specification 114-2069 28 NOV 18 Rev E All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches].
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. EPower Connectors 4.20mm (.165") Pitch Mini-Fit Plus Terminal 46083 Crimp,
Metal Film Resistor Kit
Ratings: Rated Power 0.5W at 70 C Max. Working Voltage 350V Max. Overload Voltage 700V Dielectric Withstanding Voltage 700V Rated Ambient Temp. 70 C Operating Temp. Range -55 C to +155 C Resistance Tolerance