CLICK HERE TO GO BACK TO PART NUMBER OVERVIEW. QFP/TQFP - 64 Pins (10x10) 0.5mm pitch. Detail C. Detail B

By using this Adapter a connection between Socket and Emulator or programming device can be easily achieved.

Series Introduction QFP-Production Use Socket and Emulation-Adapter YAMAICHI's IC149-Series is available in many different formats, from 44 pins to 240 pins. It is designed to fit most of the common semiconductors

PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS

BOARD/WIRE-TO-BOARD CONNECTORS PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS Minitek Headers for Pin-in-Paste Processes OVERVIEW Minitek is FCI s brand for board-to-board and wire/cableto-board connectors

2.54mm Pitch Board to Board Connector

2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.

2.54mm Pitch Board to Board Connector

2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.

CONTACTING - MODULES TEST SOLUTIONS ENGINEERED TO CONNECT

ENGINEERED TO CONNECT CONTACTING - MODULES TEST SOLUTIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER CONTACTING - SEMICONDUCTOR 3 CONTACTING - MODULES QSEVEN

High Speed, Matched-Impedance, Parallel Board-to-board Connector System

NEW High Speed, Matched-Impedance, Parallel Board-to-board Connector System IT Series (2 required) IT Series Outline High-speed matched-impedance parallel board-to-board connector designed for applications

HAMBURG INDUSTRIES CO., LTD.

SPECIFICATION OF IC CARD ACCEPTOR Model No.: ICA-607 Revision: 1.0 Issue Date: Oct.15, 2001 HAMBURG INDUSTRIES CO., LTD. 6FL., No.12, Lane 270, Sec. 3, Pei Shen Rd., Shen Keng Hsiang, Taipei Hsien, Taiwan

Memory card connectors

Memory card connectors (PCMCIA CONFORMABLE) surface mount 560H SERIES - LIGHTWEIGHT Features The connectors conform to the Japan Electronic Industry Development Association (JEIDA) and Personal Computer

2mm Pitch 2 Piece Battery Connector. Horizontal/Vertical

FEATURES Low profile battery connectors (GF21/GF22/GF31 only) with 2.6mm (.12") height. 2 piece type with a highly reliable connection Sequence connection (FMLB : First Mate Last Break, 1 pin only) is

PRODUCT SPECIFICATION

0.8x1.2 mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 0.8x1.2mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug

Poke-Home: Horizontal AWG: WTB INTER CONNECT APPLICATIONS FEATURES AND BENEFITS ELECTRICAL MECHANICAL ENVIRONMENTAL HOW TO ORDER 00X

The new 9276 series connector provides a quick and reliable wire-toboard termination in a sleek 2.5mm pitch SMT package for a broad range of industrial and commercial markets. With almost every product

Spring Loaded Contacts

Spring Loaded Contacts Contents ATE Spring Probes Specifications One Part Probes Two Part Probes Spring Loaded Contacts Specifications Spring Loaded Contact Connectors Single Spring Loaded Contacts SMT

PRODUCT SPECIFICATION

2.54mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 2.54mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug connector

ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Gauge Size

The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB

.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES

Introduction: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements. vailable in Single,

D-Sub Connectors XM3. D-Sub Connectors That Are Ideal for Office Equipment Interfaces. Space-saving 9-pin Slim D-sub Socket Connectors for Boards

XM3 XM3 Series That re Ideal for Office quipment Interfaces Shielded against MI. ompact, robust connectors with metal shells. nchors and rounding ixtures are available. RoHS ompliant Slim Models Join the

TY3085/6 SERIES. 3.00mm Pitch Wire To Wire Connector. Specification. Circuits. Kingmate

3.00mm Pitch Wire To Wire Connector Assembly Layout Right Angle Type DIP-Type Specification Circuits Pitch Current Rating Voltage Rating Contact Resistance Withstand Voltage Insulation Resistance Temperature

PRODUCT SPECIFICATION

2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector

Standard AWG: WTB

The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB

AVX Wire-to-Board Connectors

AVX Wire-to-Board Connectors www.avx.com Version 11.11 Table of Contents INSULATION DISPLACEMENT CONNECTORS (IDC) WIRE TO BOARD (WTB) DISCRETE WIRE IDC SERIES 9175...................................................................................

10. Mini Coax Connectors

. Connectors The allows multi-pole coaxial data transmission for board-to-board, cable-to-board and cable-to-cable applications with protection up to IP 65 / IP 67. At the same time, applications up to

- 1 - General ordering data Order No

General ordering data Order No. 1752992001 Part designation SL-SMT3.5/3/180G 1.5SN Version EAN 4032248130917 Qty. 100 pc(s). PCB plug-in connector, Male connectors, Reflow solder connection, Pitch: 3.50

Rotary Series. Specifications. Material. Soldering Process. Max Room Temperature 120 ~ 150sec 60sec. 5 ~ 10sec.

Specifications Mechanical Mechanical Life Operating Force Environmental Operating Temperature Storage Temperature : 200mΩ max. 20,000 steps : 200gf-cm max. : -25 C to +80 C : -40 C to +85 C Material Base

SMP-CGA DIRECT MOUNT, SOLDERLESS SOCKET FOR BURN-IN AND TEST APPLICATIONS

38.500 SMP-CGA DIRECT MOUNT, SOLDERLESS SOCKET FOR BURN-IN AND TEST APPLICATIONS FEATURES: Wide temperature range (-55C to +155C ) xga IC High current capability (up to 4A ) Excellent signal integrity

COMPONENT SPECIFICATION M20 SERIES CONNECTORS AUGUST 2016 CONTENTS: SECTION TITLE PAGE. 1 Description of Connector and Intended Application 2

AUGUST 2016 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Gauges 5 APPENDICES NOTES: 1. Third angle projection

Description: SM-BGA socket for BGA223 19x15 array 0.5mm pitch 8mm x 10mm x 1.2mm DUT

Silver Ball Matrix BG Socket Recommended Torque 1.5 in-lb. Features Wide temperature range (-55C to +150C). Current capability is 4 per pin. Over 40GHz bandwidth @-1dB for edge pins. Low and stable contact

10. Mini Coax Connectors

. Connectors The allows multi-pole coaxial data transmission for board-to-board, cableto-board and cable-to-cable applications with protection up to IP65 / IP67. At the same time, applications up to 2.5

XA CONNECTOR. 1Certified LR R

Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Specifications Current rating: 3 A AC DC (AWG #22, #20) Voltage rating: 250 V AC DC Temperature range: -25 C to +85 C (including

GHz BGA SOCKET - direct mount, solderless

45.00±0.25 GHz BGA SOCKET - direct mount, solderless Features Directly mounts to target PCB (needs tooling holes) with hardware High speed reliable elastomer connection Minimum real estate required Compression

From dc to 10 GHz the. VSWR shall not exceed 1.3 &.04 (f) where f is the frequency in Gigahertz (GHz).

121 Series Coaxial Snap On & Screw On Types / 50 Ohm & 75 Ohm These 50 and 75 Ohm coaxial connectors are easily inserted into your printed circuit board using an insertion tool. Solder is eliminated and

TN019. PCB Design Guidelines for 3x2.5 LGA Sensors Revised. Introduction. Package Marking

PCB Design Guidelines for 3x2.5 LGA Sensors Revised Introduction This technical note is intended to provide information about Kionix s 3 x 2.5 mm LGA packages and guidelines for developing PCB land pattern

FPC CONNECTORS Y3FT (0.3 mm pitch) with FPC tabs

AYF31 FPC CONNECTORS FOR FPC CONNECTION FPC CONNECTORS Y3FT (0.3 mm pitch) with FPC tabs (Former Name: YF31) FEATURES 1. Low-profile, space-saving design (pitch: 0.3mm) The 0.9mm height, 3.0mm depth contributes

M22 Connectors Specification

Specification 2mm pitch, with 0.5mm square male pin connection system. oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Jumper socket: Male: Finish: Electrical

TN008. PCB Design Guidelines for 2x2 LGA Sensors. Introduction. 2x2 LGA Package Marking

PCB Design Guidelines for 2x2 LGA Sensors Introduction This technical note is intended to provide information about Kionix s 2 x 2 mm LGA packages and guidelines for developing PCB land pattern layouts.

2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)

mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features 1. Correspond to Board Design in Wide Variation Crimp Socket Receptacle Pin Header (1) Low profile

M20 Connectors Specification

Specification mm pitch, with 0.64mm square male pin connection system. mm (.100") PITCH oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Male: Finish: Electrical

Compact Coaxial Connectors Compatible with IEC (Type SMB) Standard SMT Type SMB Connector

COMPONENTS PRODUCT INFORMATION NEW Compact Coaxial Connectors Compatible with IEC60169-10 (Type SMB) Standard SMT Type SMB Connector CONNECTOR MB-0156-3 October 2010 SMT Type SMB Connector P/N No.: SMBR003D00

Connector MACHINE PIN SOCKET EMS SERIES FEATURES SPECIFICATIONS KINDS OF BASE

MACHINE PIN SOCKET EMS SERIES Connector FEATURES Funnel shaped four-fingered and six-fingered contacts provide easy IC insertion and withdrawal, high reliability Gold plated contact to ensure low contact

YL CONNECTOR. 1Certified LR R Specifications. Standards. 4.5mm pitch/disconnectable Crimp style Wire-to-wire connectors

.mm pitch/disconnectable Crimp style Wire-to-wire connectors Panel lock Inner lock lance Specifications Current rating: 0A AC, DC max. (A when retainers are mounted) Voltage rating: 00V AC, DC max. Temperature

Rotary Series. Specifications. Material. Soldering Process. Max Room Temperature 120 ~ 150sec 60sec. 5 ~ 10sec.

MCRH2 MCRV2 MCRS2 Specifications Mechanical Mechanical Life : 200mΩ max. 20,000 steps Operating Force : 200gf-cm max. Environmental Operating Temperature : -25 C to +80 C Storage Temperature : -40 C to

.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES

dam Technologies, Inc. INTRODUCTION: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements.

ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 0XX. Wire Gauge Size. Code Accepted Wire Cap Code Wire Gauge Insulation Pages 6-7

The 917X series of surface mount Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from

Gecko Connectors Introduction

Gecko onnectors Introduction Gecko is a mm pitch High-Reliability connector range from Harwin. Improving on the popular 2mm pitch Datamate series, and harnessing the modern technology of micro-machining,

2.54mm Pitch Bottom Entry Type Connector

All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

5mm Pitch Miniature Potting Connectors for Secondary Power Supply

5mm Pitch Miniature Potting Connectors for Secondary Power Supply DF5 Series Single row type Features 1. Potting Product This connector is capable of potting 9mm maximum, and 22.5mm mounting height is

Micro Coaxial Connector. Ultrasmall Series with mating height 1.00 mm

MCC Micro Coaxial Connector Ultrasmall Series with mating height 1.00 mm IEEE802.11a b g n WiMAX Bluetooth Zigbee MIMO (Multiple input and multiple output) 1 USS RF V Plug Cable Assembly Mating height

1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies

Features 1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies DF65 Series 1. Enhanced contact reliability and lock structure The unique locking structure reinforces the engagement between

EAO Product Information. Series 84

EAO Product Information Series Switches and Indicators Switches and Indicators Index Series Description Page 539 Product Assembly Page 540 Mounting Instruction Page 541 Product Range - pushbuttons for

For board-to-fpc. Narrow pitch connectors (0.4mm pitch)

Automation Controls Catalog For board-to-fpc Narrow pitch connectors (0.4mm pitch) F4 Series 5.0mm 4.1mm RoHS compliant FEATURES 1. 0.9 mm mated height low profile two-piece type connectors 2. Strong resistance

HB01 Series Waterproof Cable-to-Cable Connector

v1.0 HB01 Series Waterproof Cable-to-Cable Connector Product Information Module Japan Aviation Electronics Industry, Ltd. Proprietary. Copyright 2016, Japan Aviation Electronics Industry, Ltd. JAE HB01

2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR R PC board layout (viewed from component side) and Assembly layout

Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Secure locking device Solder crack preventive material Low insertion force Insertion guide mechanism Applicable to automatic board

MINIATURE SIGNAL RELAYS

Information MINIATURE SIGNAL RELAYS UA SERIES (DIP Type) UB SERIES (SMD Type) TECHNICAL DATA EM Devices Corporation 17 EMDST5VOL1E17H The information in this document is based on documents issued in March,

Serial ATA (SATA) Connector

Product 108-51052 Specification PRE: Tay Aik Poh 20 MAY 11 Rev G APP: Leong See Fan DCR No. D20110520030314_706049 Serial ATA (SATA) Connector 1.0 SCOPE This specification covers the requirements for product

GSG-MA-0001 RJ45 1X2 Tab Up T/H, Slim, Sink 10G Base-T

To: Customer P/N: UDE P/N: Description: RJ45 1X2 Tab Up T/H, Slim, Sink 10G Base-T Contact Area : 30μ'' Min. Gold LED:L-Green; R-Orange/Green 100% RoHS material,without exemption Approved Spec No. Update

MINI CIRCULAR DIN PLUGS

MINI CIRCULAR DIN PLUGS 7000 SERIES SERIES. Plug for Cable Solder! Available in 3, 4, 5, 6, 7, 8 and 9 circuits! Voltage rating: 50V AC/DC! With inner metal cover, strain relief cap and plastic hood! Current

Features. Description: SG-MLF Socket for 8x8mm. Recommended torque = 1.25 lbf-in. (14.1 N-cm) SG-MLF-7007 Drawing

GHz MLF Socket - Direct mount, solderless Features Directly mounts to target PCB (needs tooling holes) with hardware High speed reliable elastomer connection Minimum real estate required Compression plate

sealed mini usb connectors

QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:

SECTION 14. DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214

SECTION 14 14 DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214 Contents DIN 1.0/2.3 Introduction... 14-4 Interface... 14-4 Characteristics Eco... 14-5 Plugs Eco... 14-6 Jacks Eco... 14-6

Modular Jack Connector for High-Speed Transmission

All non-rohs products NEW have been discontinued, will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connects.com, contact your Hirose sales representative.

Operating Temperature: -40ºC to +125ºC 6XX. Wire Gauge Size

AVX developed the initial SMT discrete wire IDC connector 5 years ago for 26-28AWG AVX wires. Since then, we have seen this Wire-to-Board (WTB) contact technology spread to multiple wire gauges and multiple

2.5mm Pitch Connector for Discrete Wire Connection

.mm Pitch Connector for Discrete Wire Connection DF1 Series Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves the low profile.. Insulation Displacement Area Protected by

JULY 2014 SECTION TITLE PAGE. 1 Description of Connectors and Intended Applications 2. 2 Marking of Connector and/or Package 2.

M80 & M83 SERIES RECTANGULAR CONNECTORS JULY 204 SECTION TITLE PAGE Description of Connectors and Intended Applications 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix Contact Orientations

1.27mm Pitch Connector

1.27mm Pitch Connector FX1 Series DIN duplex density mount has been achieved. (DIN 96 contacts and FX1 192 (96x2) Photo 1 Features 1. High density and space saved-din Duplex Mount Achieved The alignment

SSL - Discrete Wire IDC Contact & Cap

The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB

1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies

NEW 1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies DF65 Series (UL Pending) Lock structure and operation Socket Header Latch Latches are deflected slightly during mating. Features

2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)

mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features Correspond to Board Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header In-line

Discrete Wire IDC Contact & Cap

The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB

2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection

.5mm Pitch Connectors for Full Lock and Discrete Wire Connection DF1E Series UL, C-UL Listed Full lock function added Inner-lock system full lock mechanism Features 1. Full Lock Function dded The inner

3M IDC Ribbon Cable Socket. Series 891

78-51-- Rev A 1 of 8 M IDC Ribbon Cable Socket Series 891 Product Specification 78-51-- Released: 9-7-11 Austin, TX 7876-9 78-51-- Rev A of 8 Table of Contents Section Page 1. Scope........ M Customer

SECTION TITLE PAGE. 1 Description of Connectors and Intended Applications 2. 2 Marking of Connector and/or Package 2. 3 Ratings 3

C0053 M80 & M83 SERIES RECTANGULAR CONNECTORS FEBRUARY 8 SECTION TITLE PAGE Description of Connectors and Intended Applications 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix Contact Orientations

Rated current. Dielectric withstanding voltage

mm Pitch Connectors HDR series Interface Connectors Outline HDR series connectors are very small surface mount (SMT) interface connectors with their contacts arranged at a pitch of mm, designed for the

OPEN BASE STATION ARCHITECTURE INITIATIVE

OPEN BASE STATION ARCHITECTURE INITIATIVE Appendix F Specification for Slim-I/O Panel Mount Cable to Board I/O Connector Version 1.0 Issue 1-0 1 () 9 10 11 1 1 1 1 1 1 1 19 0 1 9 0 1 9 0 1 FOREWORD OBSAI

2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)

mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) DF Series Features 1. Correspond to oard Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header (1) Low

Small-sized, plastic type, push-pull lock connectors

Small-sized, plastic type, push-pull lock connectors RP17 Series Product Specifications Ratings Rated current Rated voltage Features 1. Superior mating operability Secure mating and easy unmating is achieved

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPECIFICATIONS Features and enefits Exceeds Category 5 performance

FPC connectors (0.3mm pitch) Front lock with FPC tabs

AYF31 For FPC FPC connectors (0.3mm pitch) Front lock with FPC tabs Y3FT Series FEATURES 1. Low-profile, space-saving design (pitch: 0.3mm) The 0.9mm height, 3.0mm depth contributes to the miniaturization

50W TO220 High Power Resistors

50W TO220 High Power Resistors MHP 50 Non-inductive, thin film technology. Thermally enhanced Industry standard TO220 package. RoHS compliant. Low thermal resistance, 2.3 C/W resistor hot spot to metal

SMT TR series. Surface mount tiny washable rocker switches. Distinctive features and specifications.

SMT TR series Surface mount tiny washable rocker switches istinctive features and specifications Entirely designed for surface mount Tape and reel packaging Reflow solderable High temperature plastic materials

For FPC. FPC connectors (0.2mm pitch) Back lock

0.9 For FPC FPC connectors (0.2mm pitch) Back lock Y2B Series AYF21 New FEATURES 1. Slim and low profile design (Pitch: 0.2 mm) 0.2 mm pitch back lock design and the slim body with a 3.15 mm depth (with

GD1-MA-0005 RJ45 1X1 Tab Down Through Hole 10G Base-T

To: Customer P/N: UDE P/N: Description: RJ45 1X1 Tab Down Through Hole 10G Base-T Contact Area : 50μ'' Min. Gold LED:L-Yellow/Green; R-Green 100% RoHS material,without exemption Approved Spec No. Update

ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 5XX. Wire Gauge Size

The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB

For FPC. FPC connectors (0.3mm pitch) Back lock

0.9 For FPC FPC connectors (0.3mm pitch) Back lock AYF33 Y3B/Y3BW Series New Y3B Y3BW is added. FEATURES 1. Slim and low profile design (Pitch: 0.3 mm) Back lock type and the slim body with a 3.15 mm depth

CF Series AXC5/AXC6. FEATURES 1. Vertical mating type with a 0.8 mm mated height low profile design

For board-to-micro coaxial wire Micro coaxial connectors (Low profile) AC5/AC6 CF Series 2. with strong resistance to various environments provides high contact reliability and facilitates connection work

Type 167/184 Metallized Polyester Radial Lead Capacitors Radial Box Metallized Polyester Capacitors for Automatic Insertion

Radial Box Metallized Polyester Capacitors for Automatic Insertion Specifications Capacitance Range: Voltage Range: Capacitance Tolerance: Operating Temperature Range: Dielectric Withstand Voltage: Dissipation

Setting Standards Connectors M 16

Setting Standards Connectors M 16 inclusive 15 Product Overview 16 Housings page 18 Inserts page 22 Accessories page 29 Technical Data M 16 Control Signal Connectors Mechanical Data Housing Materials and

For FPC. FPC connectors (0.3mm pitch) Back lock

Automation Controls Catalog For FPC FPC connectors (0.3mm pitch) Back lock Y3BL Series New FEATURES 1. Slim and low profile design (Pitch: 0.3 mm) The Y3BL is a 0.6 mm low-profile connector with a back-lock

For board-to-fpc. Narrow pitch connectors (0.4mm pitch)

Automation Controls Catalog For board-to-fpc Narrow pitch connectors (0.4mm pitch) A4F Series 3.0mm 2.4mm RoHS compliant FEATURES 1. 0.6 mm mated height low profile two-piece type connector 2. Space-saving

CMS SLIDE SWITCHES (SMD) COPAL ELECTRONICS CMS T B FEATURES PART NUMBER DESIGNATION. RoHS compliant INTERNAL STRUCTURE.

OPAL ELETRONIS SLIDE SWITHES (SMD) MS RoHS compliant INTERNAL STRUTURE 7 FEATURES RoHS compliant Excellent contact stability by twin Gold-plated contact mechanism Load life of, cycles ompatible with automatic

Customer P/N: UDE P/N: Description: GDA-MA-0001 RJ45 1X1 Tab Down Through Hole 10G Base-T Contact Area : 30μ'' Min. Gold LED:L-Green; R-Green/Yellow

To: Customer P/N: UDE P/N: Description: RJ45 1X1 Tab Down Through Hole 10G Base-T Contact Area : 30μ'' Min. Gold LED:L-Green; R-Green/Yellow 100% RoHS material,without exemption PoE 60W Approved Spec No.

ROTATRY ENCODER REC-03 REC-05 / 06

ROTATRY ENCODER REA-01 REA-02 REA-03 REB-01 REC-03 REC-05 / 06 RED-01 REE-01 25-4-2006 Characteristics Series Circuit Operating temperature range Soldering REA-01 1P4T -20 to 60 Dip, Manual Rating (max.)

2 2.2 mm Pitch, Wire-to-Wire Connectors for Small Spaces

2 2.2 mm Pitch, Wire-to-Wire Connectors for Small Spaces DF62 Series Compact shape due to 2 x 2.2 grid layout of pins *Both are 7 contacts with 3A current rating 16 16 Existing products DF62 Fig.1 Features

Features wide bandwidth 10 to 3000 MHz balanced transmission line excellent return loss aqueous washable patent pending

Surface Mount top hat RF Transformer 50Ω 10 to 3000 MHz Maximum Ratings Operating Temperature -40 C to 85 C Storage Temperature -55 C to 100 C RF Power 0.4W DC Current 30mA Permanent damage may occur if

Varicon. Contents. The Varicon Range Introduction to Varicon Tools Page 26. Series 7008 Page 6. Series 7022 Page 8. Series 8020 Page 27

AVX Varicon Contents The Varicon Range............................................................ 2 Introduction to Varicon........................................................ 3 Series 7008 Page 6

Pin Configuration. Surface Mount 9.10 x 4.80 x 1.24 mm SMP-35C

Features For multiple applications Usable bandwidth 10 MHz Low loss High attenuation Balanced operation Ceramic Surface Mount Package (SMP) Hermetic RoHS compliant (2002/95/EC), Pbfree Pb Package Surface

2.5mm Pitch Connector for Discrete Wire Connection

.mm Pitch Connector for Discrete Wire Connection DF1 Series Jul.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves

RWZ CONNECTOR. 1Certified LR Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors

Disconnectable Crimp style Wire-to-wire connectors In unit connection, this RWZ connector is a hybrid type double row drawer connector with combined signal and power supply circuits, absorbs misalignment

Varicon. Contents. The Varicon Range Introduction to Varicon Tools Page 26. Series 7008 Page 6. Series 7022 Page 8. Series 8020 Page 27

AVX Varicon Contents The Varicon Range............................................................ 2 Introduction to Varicon........................................................ 3 Series 7008 Page 6

Description: RJ45 1X4 Tab Up Through Hole, Long Body 2.5G Base-T Contact Area : 50μ" min. Gold LED:L-Yellow;R-Green PoE 60W & Light Pipe

To: Customer P/N: UDE P/N: Description: RJ45 1X4 Tab Up Through Hole, Long Body 2.5G Base-T Contact Area : 50μ" min. Gold LED:L-Yellow;R-Green PoE 60W & Light Pipe Spec No. Update Date Revision RTK16036-00

Amphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications

Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility

Relays & Sockets. RF1V Force Guided Relays/SF1V Relay Sockets. Certification Organization/ File Number. UL/c-UL File No.

RFV Key features: Compact and EN compliant RFV force guided relays Force guided contact mechanism (EN00 Type A TÜV approved) Contact configuration -pole (NO-NC, 3NO-NC) 6-pole (NO-NC, NO-NC, 3NO-3NC) Built-in