ROTATRY ENCODER REC-03 REC-05 / 06
|
|
- Charleen Hood
- 5 years ago
- Views:
Transcription
1 ROTATRY ENCODER REA-01 REA-02 REA-03 REB-01 REC-03 REC-05 / 06 RED-01 REE
2 Characteristics Series Circuit Operating temperature range Soldering REA-01 1P4T -20 to 60 Dip, Manual Rating (max.) Contact resistance Insulation resistance Withstand voltage 1mA 5V DC 500 mω max. 50 MΩ min. 100 V DC 100 V AC for 1 min. Operating force Terminal Strength Actuator Strength Solderability Dip soldering Manual soldering 14.7 mn m 0.5 kgf for 15 seconds 1.0 kgf for 15 seconds 230 ± 5 260, 5 seconds 380, Operating life with load (load: DC 4V, 0.3A) Cold Dry heat Damp heat 50,000 cycles 1Ω max. -40 for 168 hrs 70 for 168 hrs 40, 90 to 95% RH for 168 hrs
3 Series Angle Resolution Phase-difference Operating temperature range Soldering REA o T -10 to 60 Reflow, Manual Rating (max.) Contact resistance Insulation resistance Withstand voltage 0.01A DC 5V 1,000 mω max. 100 MΩ min. 100 V DC 100V AC, 1 min. Operating force Terminal Strength Actuator Strength Solderability Reflow soldering Manual soldering 3 ± 0.5 mn m 0.5 kgf for 15 seconds 1.0 kgf for 15 seconds 230 ± max., 5 s 380, Operating life without load Operating life with load (load: DC 5V, 0.01A) Cold Dry heat Damp heat 50,000 cycles, 1,000 mω max. -40 for 96 hrs 85 for 96 hrs 40, 90 to 95% RH for 96 hrs Carrier taping available
4 Series Circuit Operating temperature range Soldering REA-03 1P4T -10 to 60 Dip, Manual Rating (max.) Contact resistance Insulation resistance Withstand voltage 1mA 5V DC 500 mω max. 100 MΩ min. 100 V DC 100 V AC for 1 min. Operating force Terminal Strength Actuator Strength Solderability Dip soldering Manual soldering 12 mn m Max. 0.5 kgf for 15 seconds 1.0 kgf for 15 seconds 230 ± 5 260, 5 seconds 380, Operating life without load Cold Dry heat Damp heat 50,000 cycles 1Ω max. -30 for 168 hrs 80 for 168 hrs 40, 90 to 95% RH for 96 hrs
5 Series Circuit Angle Resolution Phasedifference Operating temperature range Soldering REB-01 1P1T 15 o T -10 to 70 Dip, Manual Rating (max.) Insulation resistance Contact resistance Encoder Switch Encoder Switch 0.5mA DC 5V 10mA DC 5V 100 mω max. 100 MΩ min. 50 V DC Withstand voltage 10 MΩ min. 50 V DC 50 V AC for 1 min. Operating force Terminal Strength Actuator Strength Solderability Encoder Switch Dip soldering Manual soldering 5 mn m 2.5 N 0.3 kgf for 10 seconds Encoder Operating life without load Switch Push: 8.2kgf,10s Pull: 5.1kgf,10s 230 ± 5 260, 10 seconds Cold Dry heat Damp heat 300, 30,000 cycles 20,000 cycles, 200 mω max. -40 for 240 hrs 85 for 240 hrs 40, 90 to 95% RH for 240 hrs
6 Series Angle Resolution Phase-difference Operating temperature range Soldering REC o T -10 to 70 Dip, Manual Rating (max.) Insulation resistance Withstand voltage 0.5mA DC 5V 10 MΩ min. 50 V DC 50 V AC for 1 min. Operating force Terminal Strength Actuator Strength Solderability 15 mn m 0.3 kgf for 10 seconds Push/ Pull : 8.2kgf, 10s 245 ± 3 260, 5 seconds 380, Operating life without load Cold Dry heat Damp heat 15,000 cycles -40 for 240 hrs 85 for 240 hrs 40, 90 to 95% RH for 240 hrs
7 Series Detent Angle Resolution Phase-difference Operating temperature range Soldering REC-05 Without REC o T -10 to 70 Dip, Manual Rating (max.) Contact resistance Insulation resistance Withstand voltage 0.5mA DC 5V 50 mω max. 10 MΩ min. 50 V DC 50 V AC for 1 min. Operating force Terminal Strength Actuator Strength Solderability REC-05: 3 N cm REC-06: 0.2~2 N cm 0.3 kgf for 10 seconds Push/ Pull : 8.2kgf, 10s 230 ± 5 260, 5 seconds 350, Operating life without load Cold Dry heat Damp heat REC-05: 30,000 cycles REC-06: 100,000 cycles -40 for 240 hrs 80 for 240 hrs 40, 90 to 95% RH for 240 hrs
8 Series Angle Resolution Phase-difference Operating temperature range Soldering RED o 15 T 6ms -40 to 85 Dip, Manual Rating (max.) Insulation resistance Withstand voltage 10mA DC 5V 100 MΩ min. 250 V DC 300 V AC for 1 min. Operating force Terminal Strength Actuator Strength Solderability Torque Push Dip soldering Manual soldering 260, 300, 10 mn m 0.5~8 N 0.5 kgf for 60 seconds Push/Pull: 10kgf, 10s 230 ± 5 5 seconds Rotation Operating life without load Push Cold Dry heat Damp heat 15,000 cycles 10,000 cycles -25 for 48 hrs 70 for 48 hrs 40, 90 to 95% RH for 96 hrs Part No.: RED
9 Characteristics Series Angle Resolution Operating temperature range Soldering REE o to 70 Dip, Manual Rating (max.) Insulation resistance Withstand voltage 10mA DC 5V 100 MΩ min. 100 V DC 100 V AC for 1 min. Operating force Terminal Strength Actuator Strength Solderability 0.6 N cm 0.5 kgf for 60 seconds Push/Pull: 4kgf cm 230 ± 5 Dip soldering 245, 5 seconds Manual soldering 300, Operating life without load Cold Dry heat Damp heat 30,000 cycles -25 for 48 hrs 70 for 48 hrs 40, 90 to 95% RH for 96 hrs
Typical Specifications. (Resistive load) Contact resistance (Initial/After operating life) Operating force. Operating life. For PC board.
Switch SPVQ Series Water-proof structure with mm long travel. Typical Specifications Items Rating(max.)/(min.) Contact resistance (Initial/After operating life) Operating force Specifications 0.A V DC/0BA
More informationTypical Specifications. Output signal. Rating. Operating life. Operating temperature range. Number of detents. Number of pulse
ECAH ECCH mm Size ABC Switch capable of composite control Typical Product Line Structure Actuator length (mn m) Output signal ating Number of detents Operating life Items Operating temperature range Number
More informationHeavy torque and comfortable operation feel for encoder and potentiometer applications. Typical Specifications. Items. Rating 1mA 5V DC 0.
EC0A RK0 0mm Size Heavy torque and comfortable operation feel for encoder and potentiometer applications Typical Specifications Items Specifications Encoder Potentiometer Product Line Length of the configuration
More informationFirm operating feel and high robustness ideal for integrated control of automotive equipment. Typical Specifications(Stick Switch)
RKJXW 8-directional Stick (with Encoder / enter-push Function) Firm operating feel and high robustness ideal for integrated control of automotive equipment Typical Specifications(Stick ) Items RKJXW1 RKJXW2(Inner-shaft)
More informationFirm operating feel and high robustness ideal for integrated control of automotive equipment. Typical Specifications(Stick Switch)
RKJXW 8-directional Stick (with Encoder / enter-push Function) Firm operating feel and high robustness ideal for integrated control of automotive equipment Typical Specifications(Stick ) Items RKJXW1 RKJXW2(Inner-shaft)
More informationD mn m 8. 5±5mN m. Push-on switch ± ± ±0.5 8± ± ± ±0.35 4±2 6±3 5±
shaft 9mm size 11mm size Series EC09E EC11B EC11E EC11G Output types Single-shaft Dual-shaft Single-shaft Operating direction Vertical Horizontal Vertical 15 / 30 Features 9 / 18 15 / 30 or without 18
More information12mm Rotary Encoder with LED. Pulse 24 / 360. Insulation Resistance (min) Operating Speed (RPM)
Type DPL12 Series Key Features 12mm rotary encoder Incremental type Push switch option Various shaft lengths LED color options Detent Options 12mm rotary incremental encoder with LED for use in electronic
More informationPulse Withstanding Thick Film Resistors(PWCR Series)
Pulse Withstanding Thick Film Resistors(PWCR Series) Features: Excellent pulse withstanding performance Higher power ratings than General Purpose Thick Film Resistors Improved working voltage ratings Offered
More informationSurge Withstanding Thick FilmResistors(SWCR Series)
Surge Withstanding Thick FilmResistors(SWCR Series) Features: Excellent surge and pulse withstanding performance Higher power rating than General Purpose Thick Film Resistors Offered in to sizes RoHS &
More information27mm Size Metal Shaft Potentiometer
7mm Size Metal Potentiometer RK7 Series High-grade potentiometer featuring good control feel and superior features. Rotary Slide Trimmer Multi Control Devices Position Sensors Metal Insulated Knob Operating
More informationLong travel type applicable to oblique pressing without an actuator. Typical Specifications. Items
SPVQ Waterproof Detector Slide Push Rotary Power Dualinline Package Product Line life Positions part shape Long travel type applicable to oblique pressing without an actuator Typical Specifications Items
More informationRatings and Safety Standards. Maximum rating (Power) Maximum rating (Encoder) Contact resistance (Encoder) Initial / after life test
SDKZ with Encoder type power switch with encoder Detector Power Dual-in-line Package Product Line Circuit arrangement DPST From "OFF" position to "ON" position ±N ±N ±N Torque Other positions 0±N ±N.±N
More informationA S J ASJ PTE LTD LEAD FREE THIN FILM CHIP RESISTOR SPECIFICATION. Reference No. : SYS-ENG-209. Revision No. : D
ASJ PTE LTD LEAD FREE THIN FILM CHIP Reference No. : SYS-ENG-209 Revision No. : D DOC NO: SYS-ENG-209 PAGE: 2 of 24 1.0 SCOPE...... 3 2.0 PART NUMBERING SYSTEM...... 3 3.0 RATING....... 3 3.1 Rated Power......
More informationRemote controllable and available in a wide variety of products. Typical Specifications. Total resistance tolerance ±20% Maximum operating voltage
RK168 Motor-driven Remote controllable and available in a wide variety of products Typical Specifications Items Specifications tolerance ±0% Maximum operating voltage 50V AC Total rotational angle 0 ±5
More informationA wide range of versatile products applicable for various types of control. Typical Specifications. Total resistance tolerance ±20%
RK63 6mm Size A wide range of versatile products applicable for various types of control Typical Specifications Items Specifications tolerance ±% Maximum operating voltage V AC, V DC Total rotational angle
More information9mm Size Insulated Shaft Snap-in Type
Compact potentiometer with mm width is ideal for designing high density sets. Typical Specifications Items Specifications ±% tolerance ±% Maximum operating voltage for AC only rotational RK09K: 80± RK09D:
More information9mm Size Metal Shaft Snap-in Type. Single-unit and dual-unit types suit a variety of controls. Typical Specifications. Total resistance tolerance ±20%
K09L 9mm Size Snap-in Single-unit and dual-unit s suit a variety of controls Typical Specifications Items Specifications tolerance ±% Maximum operating voltage V AC, V DC Total rotational angle 300 ± otational
More informationThin Film Current Sensing Chip Resistor (TCS Series)
(TCS Series) Features -Thin film process -High power rating up to 3 Watts in 2512 size -Tight tolerance down to ±0.5% -Extremely low TCR down to PPM/ C -Resistance values from 50m to 1ohm -High purity
More informationSelection Series: E24 & E96 E24 & E96 Temp. Coefficient (ppm/ C):
Thin Film Precision Resistors 1206 1210 Rated Power @ 70 C: 0.125W 0.2W Resistance Range (Ohms) Min: 4R7 4R7 4R7 1R0 4R7 1R0 4R7 4R7 4R7 1R0 4R7 1R0 Max: 1M0 2M5 1M0 2M5 1M0 2M5 1M0 2M5 1M0 2M5 1M0 2M5
More informationPulse Withstanding Chip Resistors
Construction 1 Alumina Substrate Features: Tolerance from ±0.5% to 5%. High power rating. Excellent pulse withstanding performance. Improved working voltage ratings. Standard package sizes of 0805 to 2512.
More informationType CPF Series. Thin Film Precision Resistors. Key Features
Type CPF Series Key Features Thin film precision resistors with TC's to 15ppm and tolerances to 0.05%. Wide range of case sizes from 0201 to 2512 Suitable for all applications where close accuracy and
More informationSERIES WW24 Industrial Wirewound Rotary Potentiometer 24mm Diameter / 5 Watts
SERIES WW4 Industrial wound Rotary Potentiometer 4mm Diameter / 5 Watts For more information about this product, visit our website at: www.potentiometers.com 5 watt @ 5 C / 4 watt @ 55 C power rating Dust-proof
More informationSPECIFICATION FOR APPROVAL PAGE: 1
PAGE: 1 CONFIGURATION & DIMENSIONS A A : 2.5±0.2 B : 2.0±0.1 C : 1.8±0.1 B E : 1.4±0.1 Not Marking F : 0.40 C 0. 1.5 0.9 1.5 0.9 F F E PCB Pattern SCHEMATIC DIAGRAM d MATERIALS a Core Ferrite DR core b
More informationThick Film Array Chip Resistor
CN Series Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Small size and light weight -Reduction of assembly costs and
More informationSINGLE TURN COPAL ELECTRONICS S T T A Ω ( 1 2 ) FEATURES PART NUMBER DESIGNATION
SINGLE TURN INTERNAL STRUCTURE 7 6 5 4 9 8 FEATURES Lead-free soldering, Cadmium-free Top and side adjustment styles Rotor with a cross slot for ease of adjustment Leaded terminals provide strong as adhesive
More informationLow Resistance Flat Chip Resistors Type SR73
Low Resistance Flat Chip Resistors Type SR73 1. Scope This specification applies to chip resistors (SR73) produced by KOA Corporation. CERTIFIED AHA 9/29/11 CERTIFIED 2. Type Designation The type designation
More informationChip Resistors Pulse Withstanding
Features: Tolerance from ±0.5% to 5% High power rating Excellent pulse withstanding performance Improved working voltage ratings Standard package sizes of 0603 to 2512 Applications: Metering (Testing/Measurement)
More informationMEDER electronic. MK24 Series Micro-Miniature Reed Sensors for SMD Mounting DESCRIPTION APPLICATIONS FEATURES MAGNETIC SENSITIVITY ORDER INFORMATION
MEDER electronic MK24 Series DESRIPTION MK24 are the smallest, magnetically operated Reed proximity switches for SMD mounting. Due to the offset design of the internal reed switch leads, the sensing characteristics
More informationType RN73 Series. Thin Film Precision Resistors. Electrical Characteristics. Key Features. Applications
Type RN73 Series Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Terminal finish electroplated 100% matte Sn Applications Communications Industrial Controls
More informationHigh Voltage Thick Film Chip Resistors Product Specification
Page No 1/10 1 Scope: 11 This specification is applicable to lead and halogen free for RTV series thick film chip resistors 12 Lead free products mean lead free termination meets RoHS requirement Pb contained
More informationMetal Film Precision Resistor. Features
Features -Excellent overall stability -Tight tolerance down to ±0.1% -Extremely low TCR down to ±10 PPM/ C -High power rating up to 1 Watts Applications -Telecommunication -Medical Equipment Construction
More informationSPECIFICATION FOR APPROVAL. 1/32W, Low Resistance Chip Resistor (Lead / Halogen free)
PAGE : 1 OF 7 1/32W, 01005 Low Resistance Chip Resistor (Lead / Halogen free) 1. Scope This specification applies 0.2mm x 0.4mm (01005) size 1/32W, fixed metal film chip resistors rectangular type for
More informationMetal Film Precision Resistor. Features
Features -Excellent overall stability -Tight tolerance down to ±0.1% -Extremely low TCR down to ±10 PPM/ C -High power rating up to 1 Watts Applications -Telecommunication -Medical Equipment Construction
More informationThick Film Chip Resistors. ( Lead Free for RM series standard ) page 1/13
( Lead Free for RM series standard ) page 1/13 1. Scope : This specification applies for the RM series of thick film chip resistors made by. 2. Construction: Over Coat Conductor : (Lead-free or with lead
More informationThin Film Precision Chip Resistor (AR Series)
Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to PPM/ C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201
More informationRotary sensors catering to diverse position detection needs. Typical Specifications. Rated voltage. Operating life.
RDC4 RDC RDC9 Rotary Type Rotary sensors catering to diverse position detection needs Typical Specifications Specifications Items RDC4 RDC RDC9 Rated voltage V DC Operating life,,,,, Total resistance kω.kω
More information14mm Size Insulated Shaft Snap-in Type. A 14mm wide potentiometer for audio, visual, electronic musical instruments and various applications
RKK mm Size Snap-in A mm wide potentiometer for audio, visual, electronic musical instruments and various applications Typical Specifications Items Specifications tolerance ±0% Maximum operating voltage
More informationSRM VDE. REG.-Nr. E932. Cap Diameter (D1, mm) Body Diameter (D2, mm)
D2 VDE REG.-Nr. E932 Specifications Per IEC 605- Features B L D IEC60065 & UL676 Compliant MELF packaging yet capable of high power handling Special conductive film enhances anti-surge capability. Absorbs
More informationSMD - Resistors. Pulse Withstanding Thick Film Chip Resistor-SMDP Series. Product: Size: 0603/0805/1206/1210/2010/2512. official distributor of
Product: Pulse Withstanding Thick Film Chip Resistor-SMDP Series Size: 0603///12// official distributor of 1. Scope Pulse Withstanding Thick Film Chip Resistor-SMDP Series -This specification applies to
More informationData Sheet. Chun Ann J.C Liu. Customer: Thin Film Precision Chip Resistor - AR Series. Checked. Product :
Data Sheet Customer: Product : Thin Film Precision Chip Resistor - AR Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 Issued Date: 19-Aug-10 Edition : REV.C6 Produced by Checked Approved by Prepared
More informationThick Film Chip Resistors Low Resistance ( for 0402 ) This specification applies for the RL04 ( 0402 ) of thick film chip resistors made by TA-I.
page 1 / 8 1. Scope : This specification applies for the RL04 ( 0402 ) of thick film chip resistors made by TA-I. 2. Construction: Over Coat Conductor : (Lead-free or with lead ) Sn Plating Ceramic Substrate
More informationCarbon Composition Resistor
Rating and Dimensions Dimensions : Millimetres Power Dimensions L D Lead d Maximum Rated Maximum Overload Dielectric Withstand Tolerance ±(%) R-Value 1/4 W 6.4 ±0.7 2.3 ±0.2 0.6 250 400 500 5 E-24 1/2
More informationWire Wound Chip Inductor
Features Ceramic base provide high Ultra-compact inductors provide high Q factors ow profile, high current options Miniature SMD chip inductor for fully automated assembly Outstanding endurance from Pull-up
More information!"#$ % &"#$ ,-././ / 0. / / 1 1/ 1 ' !"%!" "&6 7-- (8$&8+. '(')*+,-+-#+.'
!"#$ % &"#$ '()*'( +!"#$,-,-././ / 0. / / 1 1/ 1 '!"%!"234534 "&6 7-- (8$&8+. "$ "$* '(')*+,-+-#+.' /'**0'(* !"!# $ % &'!!"!# $ % &'! ()#"* +!"!# $, $! "# $ $ %& !"!#$% # %&"!%'' %&%( )"%*! +,- %.&% ".%'
More informationSMD MELF - Resistors. Metal Film Precision Resistor - SMDM Series Size: 0204/ official distributor of
Product : Metal Film Precision Resistor - SMDM Series Size: 0204/ 0207 official distributor of Metal Film Precision Resistor (SMDM Series) 1. Features -Excellent overall stability -Tight tolerance down
More informationRALEC 旺詮. Scope: 2 (EX) request. IE-SP /01/05. Released Date Page No. Remark. Series. Resistance Tolerance. Nominal Resistance.
RTH High Power Thick Film Chip Document No. Released Date Page No. IE-SP-030 2018/01/05 1 1 Scope: 1.1 This specification is applicable to lead-free and halogen-free RTH series high power thick film chip
More informationBulk and 52mm tape and reel standard; ammo pack, cut and formed, and radial Panasert/Avisert available upon request. Outline Type L ΦD H Φd
Metal Glazed Film Resistor High Voltage & High Ohmic Type Metal Glazed Film Resistor High Voltage & High Ohmic Type Features Low cost High resistance range (100KΩ to 100MΩ) Standard tolerance: ±1%, ±5%
More informationINPAQ. Specification. WIP201610S L Series. Product Name. Power Inductor. Global RF/Component Solutions
WIP201610S L Series Specification Product Name Series Power Inductor WIP201610S L Series Size EIAJ 2016 WIP201610S L Series Engineering Specification 1. Scope Feature High saturation current realized by
More informationThick Film Chip Resistor Arrays Thick Film Chip Resistor Networks (Lead-Free for CN Series Standard)
page number 1 /12 1. Scope : This specification applies for the CN series of thick film chip resistor arrays & chip resistor networks made by MQEC. 2. Construction, Dimensions, Schematic : 2.1 Construction
More informationSurge Withstanding Chip Resistor SWR Series
SR Series Features -High power rating -Excellent surge withstanding & pulse withstanding performance -Improved working voltage ratings -Standard package sizes of 0603~ -EC-Q200 Compliance pplications -Metering
More informationWire Wound Chip Inductors LPI0805FT Series
INTRODUCTION Product : LPI Miniature SMD Inductor For Power Line Size : 0805 The LPI series are low profile inductor used in notebook, PC, cellular phone backlight, inverter and etc. The devices are designed
More informationSPECIFICATION FOR APPROVAL. 1/8W, 0402, Low Resistance Chip Resistor (Lead / Halogen Free)
DOCUMENT REVISION : SRK220000NH : A2 SPECIFICATION FOR APPROVAL PAGE : 1 OF 9 1/8W, 0402, Low Resistance Chip Resistor (Lead / Halogen Free) 1. Scope This specification applies to1.0mm x 0.5mm size 1/8W,
More informationSMD Resistor Networks
Product: Size: Thick Film Array Chip Resistor-SMRA Series 42x4 / 63x4 / 42x4(Concave) / 63x4(Concave) 42x8 official distributor of Thick Film Array Chip Resistor-SMRA Series 1. Scope -This specification
More informationSPECIFICATIONS. Metal Film Precision Resistor. CSR-Serie SWISSDIS. Swissdis AG Grasweg 7 CH-4911 Schwarzhäusern
SWISSDIS Swissdis AG Grasweg 7 CH-4911 Schwarzhäusern Tel.: +41 62 919 44 00 Fax: +41 62 919 44 01 info@swissdis.ch www.swissdis.ch SPECIFICATIONS CSR-Serie Version June 2017 Features -Excellent overall
More informationIndustry's smallest size, with main unit dimensions of mm. Typical Specifications
SPVQ8 Product Line Poles Positions 1 1 Industry's smallest size, with main unit dimensions of 7mm Circuit N.O. N.C. N.O. N.C. Terminal type ngle For Lead Press fit ngle For Lead Press fit With wire( Left
More informationSpark Gap (SPG) Data Sheet
Spark Gap (SPG) ata Sheet Features Approximately zero leaking current before clamping voltage Less decay at on/off state. High capability to withstand repeated lightning strikes. Low electrode capacitance(
More informationExceeds carbon comp MIL-R-11 performance Bulk and 52mm tape and reel standard, cut and formed, or radial Panasert/Avisert available upon request
Carbon Film Resistor Normal & Miniature Style & S Series Carbon Film Resistor Normal & Miniature Style Features Low cost Excellent long-term stability Tolerance: ±2%, ±5% RoHS compliant and halogen free
More informationMetal Oxide Varistors
Straight Lead Dimensions Table Series 5D 7D 10D 14D 20D D max 7 9.5 14 17.5 24 d* 0.6 0.6 0.8 0.8 1 W** 5 5 7.5 7.5 10 H max 12.5 14.5 20 22.5 29.5 H1 max 10 12 17 20.5 28 T max 4.9 4.9 8.5 8.5 9 P max
More informationThin Film Ultra Precision Resistors
Type RU73 Series Key Features High precision - TCR 2ppm/ C and 3ppm/ C Tolerance down to 0.01% Thin film (nichrome) Available in standard and high power versions Terminal finish electroplated 100% matte
More informationSPECIFICATION FOR APPROVAL
Ⅰ. Configuration and dimensions: REV. 20160715-P PAGE 1/8 Marking Inductance code A' C H F A A' C E F G H 3.20 ±0.4 2.90 ±0.2 2.50 ±0.2 2.20 ±0.2 ±0.2 +0.3 0.60-0.0 1.80 1.40 Ⅱ. Description: a. Ferrite
More information1/4 Square, Single-Turn, Through-Hole Sealed Cermet Trimmers. Environmental
with Knob TOCOS POTENTIOMETERS 1/4 Square, Single-Turn, Through-Hole Sealed Cermet Trimmers Features 1/4 square, single-turn, through-hole, sealed cermet trimmers Top and side adjust styles available Knob
More informationThick Film Chip Resistor Arrays Thick Film Chip Resistor Networks. (Lead-Free for CN34 Series) page 1/10
(Lead-Free for CN34 Series) page 1/10 1. Scope : This specification applies for the CN34 series of thick film chip resistor arrays made by TA-I. 2. Construction, Dimensions, Schematic : 2.1 Construction
More informationSeries 291 Optical Encoder
Electrocomponents Series 9 Optical Encoder Data Sheet Precision, Long-life Compact mm Size Optical Encoder Features Package Size ( X X 7 mm) Million life cycles (No detent) Million life cycles (With detent)
More informationData Sheet. Customer: Pulse Withstanding Chip Resistor - PWR Series Size: 0603/0805/1206/1210/2010/2512 Issued Date: 13-Oct-17
Data Sheet Customer: Product: - Size: 0603/0805/1206/1210/2010/2512 Issued Date: 13-Oct-17 Edition: REV.C3 VIKING TECH CORPORATION VIKING TECH CORPORATION KAOHSIUNG BRANCH WUXI TMTEC CO., LTD. No.70 Guangfu
More informationPRODUCT SPECIFICATION
0.8x1.2 mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 0.8x1.2mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug
More informationPRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 1.27 mm (.050 inch) centerline (pitch) printed circuit board (PCB) modular jack connector series with selective gold and tin plating. 2.0 PRODUCT DESCRIPTION
More informationHigh Ohmic Chip Resistor
Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Extended resistance range(110mω ~ 1GΩ ) -Surface mount package -Highly
More information4mm Surface Mount, Single-Turn, Sealed Cermet Trimmers
Effective Date April 5 TOCOS POTENTIOMETERS 4mm Surface Mount, Single-Turn, Sealed Cermet Trimmers RoHS Compliant IMPROVED DESIGN Pb-Free and Cd-Free Features 4mm square SMD, single-turn, sealed cermet
More informationTel: /Fax: , Kuanfu N Road, HsinChu Industrial Park, 303 Taiwan, ROC 1
70, Kuanfu N Road, HsinChu Industrial Park, 303 Taiwan, ROC 1 Thin Film Precision Chip Resistors (AR Series) 1. Scope This specification applies to all sizes of rectangular-type fixed chip resistors with
More informationThin Film Precision Chip Resistor (AR Series)
Features Advanced thin film technology Very tight tolerance down to ±0.01% Extremely low down to ±5PPM/C Wide resistance range 1ohm ~ 3Mega ohm Miniature size 0201 available Thin Film Precision Chip Resistor
More informationChip Resistors / Chip Arrays
Chip Resistors / Chip Arrays w w w. b o u r n s. c o m I. CR Series Chip Resistors...92 II. CAT/CAY Series Chip Resistor Arrays...96 CAT/CAY 16 Series...96 CAY1 Chip Resistor Array...97 CAY17 Bussed Resistor
More informationCLICK HERE TO GO BACK TO PART NUMBER OVERVIEW. QFP/TQFP - 64 Pins (10x10) 0.5mm pitch. Detail C. Detail B
QFP/TQFP - 64 Pins (10x10) 0.5mm pitch Withstanding Voltage: 100V eff Solvent Durability: Freon Part Number (Details) IC149-064 - *69 - B5 B5 = Au over Ni Not available Detail C 10mm x 10mm N1 Detail B
More informationEncoders and switches
Encoders and switches Encoders and switches v02 Navarra de Componentes Electrónicos, S.A. Polígono Industrial Municipal Vial T2 Nº22 31500 Tudela Navarra Spain Tel: +34 948 820450 Fax: +34 948 824050 www.meggitt.com
More informationOver Coat. Resistive Element RBS 10 B T P Product Code Size Tolerance Packaging TCR Nominal. e.g., (1608) 1/10W.
page 1/10 1. Scope : This specification applies for the RBS series of chip resistors made by TA-I. 2. Construction: Over Coat Sn Plating Ni Plating Resistive Element Ceramic Substrate Inner electrode 3.
More informationPrecision Thin Film Precision Resistors
Key Features Thin film precision resistors with TC's of 15ppm, 25ppm and 50ppm and tolerances to 0.1%. Applications in measurement, telemetry and for sensing circuits. Case sizes 0402, 0603, 0805, 1206,
More informationMetal Film Precision Resistor. Features
Features -Excellent overall stability -Tight tolerance down to ±0.1% -Extremely low TCR down to ±10 PPM/ C -High power rating up to 1 Watts Construction & Dimension 6 5 1 2 3 4 Applications -Telecommunication
More informationFrelTec GmbH. Current Sensing Chip Resistor SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 6/8/2015 1/13 Freltec GmbH www.freltec.com SPECIFICATION Part Number 017 05 * R001 * J * T05 ** D E Size Value Tolerance Packing TCR Power Rating 017
More informationThick Film Chip Resistors ( Lead-Free for RM series standard )
page number 1/15 1. Scope : This specification applies for the RM series of thick film chip resistors made by TA-I. 2. Construction: Over Coat (Color : Black) Conductor Sn Plating Ceramic Substrate Resistive
More informationRotary Series. Specifications. Material. Soldering Process. Max Room Temperature 120 ~ 150sec 60sec. 5 ~ 10sec.
Specifications Mechanical Mechanical Life Operating Force Environmental Operating Temperature Storage Temperature : 200mΩ max. 20,000 steps : 200gf-cm max. : -25 C to +80 C : -40 C to +85 C Material Base
More informationINPAQ Global RF/Component Solutions
MCM 3216 B Series Specification Product Name Series Chip Common Mode Filter MCM B Series Size EIAJ 3216 MCM3216B SERIES (Chip Common Mode Filter) Engineering Specification Features and Application.Powerful
More informationFrelTec GmbH. Current Sensing Chip Resistor SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 11/22/2016 1/10 Freltec GmbH www.freltec.com SPECIFICATION Part Number 018 05 * R001 * J * T05 ** E* Type Size Value Tolerance Packing Power Rating 018
More informationINPAQ. Specification. MCB 1005 B Series. Product Name Chip Ferrite Bead Series MCB B Series Size EIAJ Global RF/Component Solutions
MCB 1005 B Series Specification Product Name Chip Ferrite Bead Series MCB B Series Size EIAJ 1005 RoHS Pb Chip Ferrite Bead (MCB-B Series) Engineering Spec. This product belongs to the industrial grade
More informationPTS Series High Grade Slide Potentiometer
*RoHS COMPLIANT Features High grade, long life Single and dual gang Assortment of resistance tapers Tracking error within ±3 db 45, 60 and 100 mm sizes Wide operating temperature range T-bar lever option
More informationPRODUCT SPECIFICATION
2.54mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 2.54mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
More informationPRODUCT SPECIFICATION
2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
More informationWire Wound Chip Inductor Low Profile Type LWL LWL1008. Features. Applications
Wire Wound Chip Inductor Low Profile Type Wire Wound Chip Inductor Low Profile Type Features Ceramic base provides high SRF Ultra-compact inductors provide high Q factors Miniature SMD chip inductor for
More informationLEAD FREE CHIP RESISTOR SPECIFICATION
ASJ PTE LTD LEAD FREE CHIP RESISTOR Reference No. : SYS-ENG-205 Revision No. : Z DOC NO: SYS-ENG-205 PAGE: 2 of 40 1.0 SCOPE..... 3 2.0 PART NUMBERING SYSTEM.... 3 3.0 RATING..... 3 3.1 Rating Power....
More information6x6 mm Thinner Type Tactile Switches (Pitch 4.5 mm) ACTUATOR COLOR & OPERATING FORCE: Black, 100gf Brown, 160gf Red, 260gf
TP6GM... TP6GMB... 2.5 TP6M... General Tolerance ±0.2mm How to order: TP6 1 2 3 5 6 7 1 GROUND TERMINAL: Blank Without Ground Terminal G With Ground Terminal 5 A K C ACTUATOR COLOR & OPERATING FORCE: Black,
More informationSMD High Power Precision Resistors. Type RP73 Series
Type RP73 Series Key Features High precision - Tolerance down to 0.05% and TCR down to 5PPM Power rating to 1.0W Up to 200V DC operating Terminal finish electroplated 100% matte Sn Applications Communications
More informationSurface Mount Resistor Kit 0603 Case Size
Specifications Table Type Power Rating Resistance Tolerance Nominal Resistance MC 0603 0.0625W (1/16W) ±1% 10Ω Ratings: Type MC 0603 Power Rating 0.0625W (1/16W) Max. Working Voltage 50V Max. Overload
More informationFully Sealed Container Cermet Potentiometers Military and Professional Grade
PE0 Fully Sealed Container Cermet Potentiometers FEATURES Watt at 70 C High power rating Low temperature coefficient Excellent stability Full sealing Low contact resistance variation Mechanical strength
More informationSAMSUNG ELECTRO-MECHANICS CO., LTD
Model Name : Features : ㅡ Suitable for LED lighting application ㅡ UL8750, UL1310 Class 2 ㅡ For use in Dry and Damp Location ㅡ Full-protection provided: OCP/OVP/OTP/SCP ㅡ 0-10V Dimming Control ㅡ IP67 ㅡ
More informationControl Unit Series 8208
> Installation of various components such as Snap action switch Potentiometer Relay Time relay Diodes Fuses Resistors www.stahl.de 01776E00 Components of various functions such as diodes, resistors, fuses
More informationSPECIFICATION FOR APPROVAL. 1/2W, 0603, Low Resistance Chip Resistor (Lead / Halogen free)
PAGE : 1 OF 7 1/2W, 0603, Low Resistance Chip Resistor (Lead / Halogen free) 1. Scope This specification applies to 0.8mm x 1.6mm size 1/2W, fixed metal film chip resistors rectangular type for use in
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS High-voltage SC type: NP0/X7R (Pb Free & RoHS compliant)
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS High-voltage SC type: (Pb Free & RoHS compliant) 2.2 pf to 4.7 nf Product specification Mar 1, 2007 V. 0 Product specification 2 SCOPE This specification
More informationFully Sealed Container Cermet Potentiometers Submarine Applications
Fully Sealed Container Cermet Potentiometers Submarine Applications FEATURES High power rating 1.5 W at 70 C Stainless steel shaft and bushing to endure sea salt water immersion Fully sealed IP68 on panel
More informationDATASHEET. It needs tuning process for customer s device. AMOTECH
Document Datasheet Type Dielectric Chip Antenna Application 1575.42 & 1592~1610MHz Part No. AMAN1003015ST03 Revision 1.0 DATASHEET Application GPS(1575.42 MHz) & Glonass (1592~1610 MHz) Features PIFA Structure
More informationWIRE WOUND CHIP INDUCTORS HCI SERIES HCI 0805 F T 1R0 K - Introductions. Features. Part Number Code HCI SERIES
HCI SERIES WIRE WOUND CHIP INDUCTORS HCI SERIES Introductions Product : HCI Miniature SMD Inductor For Power Line Size : 0805 The HCI series are low profile inductor used in notebooks, PC s, Cellular phone
More informationDielectric Antenna Elements
The ACT family of Dielectric Antenna offers a range of antenna for for the frequencies of 1575.42MHz and 2338 MHz. Other custom frequencies may be available on request Sizes range from 12mm square to 25mm
More informationData Sheet. Customer: Pulse Withstanding Chip Resistor - PWR Series(High Power) Size: 0603/0805/1206/1210 Issued Date: 18-Feb-17
Data Sheet Customer: Product: - PWR Series(High Power) Size: ///12 Issued Date: 18-Feb-17 Edition: Draft VIKING TECH CORPORATION 光頡科技股份有限公司 No.70 Guangfu N. Rd., Hukou Township, Hsinchu County 303, Taiwan
More information