SPECIFICATION FOR APPROVAL PAGE: 1
|
|
- Angelica McGee
- 5 years ago
- Views:
Transcription
1 PAGE: 1 CONFIGURATION & DIMENSIONS A A : 2.5±0.2 B : 2.0±0.1 C : 1.8±0.1 B E : 1.4±0.1 Not Marking F : 0.40 C F F E PCB Pattern SCHEMATIC DIAGRAM d MATERIALS a Core Ferrite DR core b Wire Enamelled copper wire c Terminal Cu/Sn d Encapsulate Epoxy novolac molding compound e Remark Products comply with RoHS' requirements b a c GENERAL SPECIFICATION a Temp. rise max. b Ambient temp. 80 max. c Storage temp d Operating temp e Terminal strength 0.5 kg min. f Rated current Current cause inductance drop within 10% g Resistance to solder heat secs. h Resistance to solvent Per MIL-STD-2F Temperature ( ) Peak Temp 245 max. Max time above sec max. Max time above 0 sec max Temperature Rising Area 2 ~ 4 / sec Preheat Area 1 ~ 180 / 90 ~ 1sec Time ( seconds ) Reflow Area 2 ~ 4 / sec 240±5 10sec 30sec max. ( ~30sec ) Forced Cooling Area 3 ~ 5 / sec 0 2
2 PAGE: 2 ELECTRICAL CHARACTERISTICS DWG No. CC251R0M3 - CC251R5M3 - CC252R2M3 - CC253R3M3 - CC254R7M3 - CC256R8M3 - CC25100K3 - CC251K3 - CC252K3 - CC25330K3 - Inductance ( µh ) 1.0±% 1.5±% 2.2±% 3.3±% 4.7±% 6.8±% 10.0±10% 15.0±10% 22.0±10% 33.0±10% Q typ Test Freq ( MHz ) SRF ( MHz ) min RDC ( Ω ) ± IDC ( ma ) max ) : Packaging information A : Bulk 2) "- ":Reference code B : Taping Reel
3 PAGE: 3 PACKAGING INFORMATION ( 1 ) Configuration T Cover Tape 2.0±0.5 A N C B C D G Embossed Carrier Carrier Tape Width : D End P:4 4 Start Leader no component 0 min. Components Trailer no component 400 min. User direction of feed ( 2 ) Dimensions Unit: Style A 178 B 21±0.8 C D 13 8 G N T ( 3 ) Q'TY & G.W. Per package Series Q'TY (pcs) Inner : Reel G.W. (gw) Style Q'TY (pcs) Outer : Carton G.W. (Kg) Size (cm) CC25 2, , x 39 x 22
4 PAGE: 4 DWGING NUMBER EXPRESSION C C Reference code Appendix code 2 : Package Appendix code 1 : Classification Tolerance code Electrical code Dimension code Type code Appendix code 1 Product Classification L Lead Free Standard products comply with RoHS' requirements 1 ~ 9 Lead Free Special products comply with RoHS' requirements Appendix code 2 Package Information Code Inner package Inner package Q'TY Remark A T.B.D. T.B.D. B T / R ( Reel package ) 00 pcs
5 PAGE: 5 RELIABILITY TEST Test item Electrical performance test Inductance L Q Self resonance frequency SRF DC Resistance RDC Rated current IDC Temperature rise test Over load test Withstanding voltage test Insulation resistance test Mechanical performance test Vibration test ( Low frequency ) max. Specification Refer to standard electrical characteristic list After test Inductors shall be no evidence of electrical and mechanical damage After tset Inductors shall be no evidence of electrical and mechanical damage 1000 MΩ min 1 Inductors shall be no evidence of electrical and mechanical damage Test condition / Test method HP4194A with HP-16034E test fixture HP4291A with HP-16093A test fixture CH-2AC Applied the current to coils The Inductance change shall be less than 10% to initial value & temperature rise shall not be more than 1 Applied the allowed DC current for 10 minutes 2 Temperature measure by digital surface thermometer Applied 2 times of rated allowed DC current to inductor for a period of 5 minutes AC voltage of 1000VAC applied between inductors terminal and coating for 5 seconds 100 VDC applied between inductor terminal 1 Amplitude Frequency Hz / 1min. 3 Direction X Y Z 4 Duration 2 hrs / X Y Z and coating Shock test Resistance to soldering heat 2 Inductance shall not change more than±5% 3 Q Shall not change more than ±% Inductors shall be dropped 10 times from a height of 1m onto 3cm wooden board Temp 260±5 Time 10±1.0 sec.
6 PAGE: 6 Terminal strength-pull test Terminal shall not be loosened or ruptured A 0.5kg load shall be applied to both Terminals in the axis direction for 1 minute Solderability test Resistance to solvent test Temperature characteristic Humidity test Cold test Thermal shock test Dry heat test Climatic test High temperature load life test Humidity load life The terminal shall be at least 90% covered with solder There shall be no case deformation change in appearance or obliteration of marking 1 Inductors shall be no evidence of electrical and mechanical damage 2 Inductance shall not change more than ±10% 3 Q shall not change more than ±% There shall be no evidence of short or open circuiting After fluxing Inductor shall be dipped in a melted solder bath at 230±5 for 5 seconds MIL-STD-2F Method 215D Temp 40±2 2 R.H % 3 Time 96±2 hours 1 Temp -25±2 2 Time 96±2 hours Room temp 15 mins Room temp 15 mins Total 5 cycles 1 Temp 85±2 2 Time 96±2 hours 1 Temp 85±2 2 Time 1000±12 hours 3 Load Allowed DC current 1 Temp 40±2 2 R.H % 3 Time 1000±12 hours 4 Load Allowed DC current -25±2 30 mins 85±2 30 mins Note Unless otherwise specified, Allow the specimen to stand at room temperature for 1 hour or more but not more than 2 hours, Measure the electrical and mechanical performances
7 PAGE: 7 UL CARD OBMW2 Magnet Wire-Component September 8, 00 JUNG SHING WIRE CO LTD 231 CHUNG CHENG RD, SEC 3 JEN-TEH HSIANG, TAINAN HSIEN TAIWAN E Mtl Dsg AIW CFUEWB EIAIW EILOCKY EILOCKW EIW EIW-2 FL.EILOCKY LSFFW LSUEW PEW PEY SF.FLW SF.EIW SF.BY@ SF.FLY@ SF.BLOCKBS SF.EILOCKY# SF.EILOCKBS SF.BW@ SFFW Mark Dsg Coat Typ ANSI Temp BC OC Type Class Polyamideimide MW81-C 2 MW75C Polyamideimide MW35C 0 Polyamide 180 Modified 0 Epoxy 2 MW74-C 0 Polyamide 155 MW79-C 155 Polyester 155 Polyester Nylon MW24-C 155 MW26C 155 MW77C 180 Nylon MW27-C 155 Nylon MW27-C 155 Modified Modified 155 Polyester Polyamide Polyamide 180 Modified 180 Polyamide MW26C 155 MW Page 1 of 2 A not-for-profit organization dedicated to public safety and committed to quality service Mtl Dsg SFFY UEW-1 UEW-2 UEW-4 UEY UEY-2 Mark Dsg BC Coat Typ OC Polyamide Nylon Polyamide ANSI Type MW80C MW2-C MW75C MW28-C MW28-C Temp Class 155 be suffixed by LZ; # - May be suffixed by LZ, EL or LZI. LZ - Signifies magned wires twisted together; EL - signifies base coated magnet wire laid parallel with top coat applied overall; LZL - signifies base coated magnet wire twisted together and covered with top coat overall. Marking: Company name or trademarks or, material designation or marked designation on packaed or reel, and Recognized Component Mark. See General Information Preceding These Recognitions For use only in equipment where the acceptability of the combination is determined by Underwriters Laboratories Inc Page 2 of 2 OBMW2 E September 8, 00
8 PAGE: 8 OMFZ2 March 4, 1994 E59481 (S) BM-21 BM-22 BM-23 EME-1100 EME-10 EME-5961C ALL ALL ALL HB 94HB Reports: January 19, 1988: January 19, 1988: January 19, 1988: June 2, 1988; June 2, 1998; June 2, R
SPECIFICATION FOR APPROVAL
PAGE: 1 CONFIGURATION & IMENSIONS Marking : " " : Start ----100 uh ( Inductance code ) A : 8.7±0.5 B : 12.0±1.0 C : 25.0±5 : 18.0±5 E C W F E : 2.5 max. F : 5.0±0.8 W : 0.65 B SCHEMATIC IAGRAM MATERIALS
More informationSPECIFICATION FOR APPROVAL
RE : 100211-A SPECIICATION OR APPROVAL PAGE: 1 Ⅰ. CONIGURATION & IMENSIONS: Marking : " " : Start ----100 uh ( Inductance code ) A : 8.7±0.5 B : 12.0±1.0 C : 25.0±5 : 18.0±5 Aψ E C Wψ E : 2.5 max. : 5.0±0.8
More informationSPECIFICATION FOR APPROVAL
Ⅰ. Configuration and dimensions: REV. 20160715-P PAGE 1/8 Marking Inductance code A' C H F A A' C E F G H 3.20 ±0.4 2.90 ±0.2 2.50 ±0.2 2.20 ±0.2 ±0.2 +0.3 0.60-0.0 1.80 1.40 Ⅱ. Description: a. Ferrite
More informationSMD Shielded Wire Wound Power Inductor. TIS4D28QES Series. Features. Applications. Dimensions
SMD Shielded Wire Wound Power Inductor SMD Shielded Wire Wound Power Inductor Features Magnetically shielded construction Compact and thin Large current and low DCR RoHS Compliant Applications DC-DC converter
More informationICL Series SMD Wirewound Chip Open-Type Inductors - ICL0603, ICL0805
SMD Wirewound Chip Open-Type s - ICL0603, ICL0805 CONFIGURATIONS: FEATURES Lower profile,high frequency Higher possible SRFs as well as excellent Q Value Higher current in compact size Customer design
More informationChip Inductor INTRODUCTION FEATURE AND APPLICATION. Feature. Application
INTRODUCTION Multilayer Chip Inductor is an electronic part that uses in resonance circuit, for noise suppression and for impedance matching in the electrical circuit. SAMSUNG Electro-mechanics has 2 series
More informationWire Wound Chip Inductors LPI0805FT Series
INTRODUCTION Product : LPI Miniature SMD Inductor For Power Line Size : 0805 The LPI series are low profile inductor used in notebook, PC, cellular phone backlight, inverter and etc. The devices are designed
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationWIRE WOUND CHIP INDUCTORS HCI SERIES HCI 0805 F T 1R0 K - Introductions. Features. Part Number Code HCI SERIES
HCI SERIES WIRE WOUND CHIP INDUCTORS HCI SERIES Introductions Product : HCI Miniature SMD Inductor For Power Line Size : 0805 The HCI series are low profile inductor used in notebooks, PC s, Cellular phone
More informationIWHQSeries FEATURES ORDERING CODE. SMD Wirewound Open-Type Chip Inductors (High Q /Frequency) 0805 TRIGON COMPONENTS
CONFIGURATIONS: FEATURES Low DC resistance design is ideal for low loss, high output and low power consumption. Especially high Q factor in this series for customer s design. Resin-coated surface enables
More informationWire Wound Chip Inductor Low Profile Type LWL LWL1008. Features. Applications
Wire Wound Chip Inductor Low Profile Type Wire Wound Chip Inductor Low Profile Type Features Ceramic base provides high SRF Ultra-compact inductors provide high Q factors Miniature SMD chip inductor for
More informationSunlord Wire Wound SMD Power Inductor Page 1 of 7 SPECIFICATIONS
Sunlord Wire Wound SMD Power Inductor Page 1 of 7 SPECIFICATIONS Customer Product Name Wire Wound SMD Power Inductor Sunlord Part Number SWPA4020S T Customer Part Number [ New Released, Revised] SPEC No.:
More informationSPECIFICATION NAMSUN ELECTRONICS CO.,LTD APPLICATION FOR APPROVAL OF. This space is used for customer's approval DATE :
USTOMER : : 0706-0 APPLICATION FOR APPROVAL OF ITEM CODE MODEL : : : : RADIAL INDUCTOR DR 6.5 7.5mm DR) 0uH (TAPING BULK) This space is used for customer's approval : 008. 6.. DRAWN BY Y. H. JEON CHECKED
More informationWire Wound Chip Inductor
Features Ceramic base provide high Ultra-compact inductors provide high Q factors ow profile, high current options Miniature SMD chip inductor for fully automated assembly Outstanding endurance from Pull-up
More informationSMT Ferrite Chip Inductor SFI201212S Series
Part : SFI201212S SERIES Version : AD Page : 1 / 7 Feature SMT Ferrite Chip Inductor SFI201212S Series Utilizing a miniaturized winding structure. These products provide high Q characteristics. Resin coated
More informationSCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1
SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSCH - 5750C - 100 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance
More informationRF WIREWOUND CHIP INDUCTORS
RF WIREWOUND CHIP INDUCTORS These high frequency High-Q chip inductors feature a monolithic body made of low loss ceramic wound with wire to achieve optimal high frequency performance. These RF chip inductors
More informationNAMSUN ELECTRONICS CO.,LTD APPLICATION FOR APPROVAL OF. This space is used for customer's approval DATE : DATA
NO : 0800-0 APPLICATION FOR APPROVAL OF ITEM DESCRIPTION CODE NO MODEL NO : : : : RADIAL INDUCTOR DR 8 X 8mm DR) 0uH This space is used for customer's approval DATE : 008. 0. 0. DRAWN BY Y. H. JEON CHECKED
More informationPower Inductors, Shielded
The Shielded Power are low profile, surface-mount inductors. They are designed for power applications or high current applications. Key Features High reliability and easy surface mount assembly Low loss
More informationSPECIFICATION NAMSUN ELECTRONICS CO.,LTD APPLICATION FOR APPROVAL OF. This space is used for customer's approval DATE :
USTOMER : : 0705-0 APPLICATION FOR APPROVAL OF ITEM CODE MODEL : : : : RADIAL INDUCTOR DR 5.5mm DR) 68uH(BULK TAPING) This space is used for customer's approval : DRAWN BY Y. H. JEON CHECKED BY. APPROVED
More informationSPECIFICATION NAMSUN ELECTRONICS CO.,LTD APPLICATION FOR APPROVAL OF. This space is used for customer's approval DATE :
USTOMER : : 0705-0 APPLICATION FOR APPROVAL OF ITEM CODE MODEL : : : : RADIAL INDUCTOR DR 5.5mm DR) 70uH(BULK TAPING) This space is used for customer's approval : 008 6.. DRAWN BY Y. H. JEON CHECKED BY.
More informationINPAQ. Specification. WIP201610S L Series. Product Name. Power Inductor. Global RF/Component Solutions
WIP201610S L Series Specification Product Name Series Power Inductor WIP201610S L Series Size EIAJ 2016 WIP201610S L Series Engineering Specification 1. Scope Feature High saturation current realized by
More informationSCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1
SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MNR - 4010-4R7 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance Code
More informationAutomotive Chip Choke EMI Suppression for CAN-Bus Networks 2-Line Common Mode Chokes
Meets AEC-Q200 Requirements Suppression of common mode noise without attenuating the signal Magnetically shielded versions for lower Rdc and higher current USB 3.0 and other high speed differential signal
More informationMICRO INDUCTORS. Features. Applications. Ordering Information. Shape and Dimensions MI - I J J T (1) (2) (3) (4) (5) (6) (7)
MICRO INDUCTORS Features 1. Very high Self-Resonant Frequencies 2. Ultra miniature size and light(0.6mm mm mm). No polarity 4. Terminal electrode has excellent solder heat resistance for soldering. 5.
More informationSpecifications For Approval
Spec No. TT3-ASSC00069 Customer Specifications For Approval Description : Coil Trade Name : UL File No. : E31156 Please return one copy with your approved signature DRAWN CHECKED QC CHECKEDAPPROVED RD
More informationSCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1 (3) CHARACTERISTICS. MSCDRI-104R-SERIES Page 1/8 MAG.
SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSCDRI - 104R - 100 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance
More informationCal-Chip Electronics, Inc.
Cal-Chip Electronics, Inc. Feature: These new SSL Series is designed for the smallest possible size, low cost and high performance. It's high energy storage and very low DC resistance offer higher saturated
More informationAutomotive Chip Choke EMI Suppression for CAN-Bus Networks 2-Line Common Mode Chokes
Part Number PE-20ACCXXXSTS Common Mode Impedance (0MHZ) Min Meets AEC-Q200 Requirements Suppression of common mode noise without attenuating the signal Magnetically shielded versions for lower Rdc and
More informationITEM : CHIP POWER INDUCTORS APPROVAL SHEET CHIP POWER INDUCTORS CUSTOMER : DATE :
ESTABLISHMENT 2006. 06. 16 APPROVED REVISION 2006. 12. 19 Series NO:IP061219001 APPROVAL SHEET CHIP POWER INDUCTORS CUSTOMER : DATE : You can reapprove only the changed quality request recorded in spec
More informationKun Shan MAZO tech Co., Ltd
Page : 1 / 8 High Current, Power Inductors MPCA-412-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 4.75 x 4.45 x 1.2mm maximum surface mount package Powder iron core
More informationKun Shan MAZO tech Co., Ltd
Page : 1 / 1 High Current, Power Inductors MPCA-63-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 7.3x6.8x 3.mm maximum surface mount package Powder iron core material
More informationKun Shan MAZO tech Co., Ltd
Page : 1/9 High Current, Power Inductors LPCA-14-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 11.5x1.3x 4.mm maximum surface mount package Powder iron core material
More informationPower Inductor SCD Series
RoHS Compliant Halogen Free REACH Compliant Part Numbering SCD 321 T - 1R M - AU Series Name Dimensions Code Inductance Internal Code (mm) (uh) Tolerance 321 3.3x3.x2.1 R47.47 K ±1% 43 4.5x4.x3.2 1R 1.
More information10SP Dimensions. 2. Marking
1. Dimensions D : Diameter with coating F : Forming Pitch T : Thickness of thermistor with coating L : Length of leads d : Diameter of leads 2. Marking 10SP 050 Nominal Diameter Resistance at 25 0R7 :
More informationShielded Power Inductors TL1010SG Series
Form Rev- /5/ Shielded Power Inductors TLSG Series FEATURES Low DCR and excellent current handling Operating temperature range: C to +5 C with Irms current, +5 C to +5 C with derated current Storage temperature
More informationShielded SMD Power Inductor
101 Features Dimensions Unit: mm -Directly connected electrode on ferrite core -Available in magnetically shielded -Low DC resistance -Suitable for large current -Available on tape and reel for auto surface
More informationSMD High Frequency Power Inductor. Designed for Utility Regulator Applications
FEATURES Recommended for use with all major Voltage Regulator ICs High Current handling capability in the smallest footprint Up to 2MHz operating frequency Extended operating temperature range: -4C to
More informationHAMBURG INDUSTRIES CO., LTD.
SPECIFICATION OF IC CARD ACCEPTOR Model No.: ICA-607 Revision: 1.0 Issue Date: Oct.15, 2001 HAMBURG INDUSTRIES CO., LTD. 6FL., No.12, Lane 270, Sec. 3, Pei Shen Rd., Shen Keng Hsiang, Taipei Hsien, Taiwan
More informationYAGEO CORPORATION SMD INDUCTOR / BEADS
YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SSL53HC Series These series have been specially designed for high current, low voltage DC-DC converter applications. This simple, rugged design
More informationYAGEO CORPORATION SMD INDUCTOR / BEADS. Notebook computers, step-up and step-down converters. Flash memory programmers, etc...
YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SDS0402 Series These shielded ultra-miniature inductors can help designers achieving significantly longer battery life in handheld communication
More informationPower Inductor MHCC/MHCI Series
RoHS Compliant Halogen Free REACH Compliant Part Numbering MHCI 42-1R M - R8AU Series Name Dimensions Code Inductance (mm) (uh) Tolerance Internal Code 412 4.1x4.6x1.2 R22.22 M ±2% R8AU 42B 4.2x4.7x2.
More informationA S J ASJ PTE LTD LEAD FREE THIN FILM CHIP RESISTOR SPECIFICATION. Reference No. : SYS-ENG-209. Revision No. : D
ASJ PTE LTD LEAD FREE THIN FILM CHIP Reference No. : SYS-ENG-209 Revision No. : D DOC NO: SYS-ENG-209 PAGE: 2 of 24 1.0 SCOPE...... 3 2.0 PART NUMBERING SYSTEM...... 3 3.0 RATING....... 3 3.1 Rated Power......
More informationYAGEO CORPORATION SMD INDUCTOR / BEADS. SLF Series. Features. Low resistance and high currents
YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SLF Series Features Low resistance and high currents Designed for low - profile type with low Rdc and large current. The magnetic shielded type
More informationSMD High Frequency Power Inductor. Designed for VRD & VRM 10.x & 11.x Applications
Designed for VRD & VRM 1.x & 11.x Applications FEATURES Recommended for use with all major Voltage Regulator ICs High Current handling capability in the smallest footprint Up to 2MHz operating frequency
More informationSPECIFICATIONS. Wire Wound SMD Power Inductor SWPA4018S Series Customer Part Number. [ New Released, Revised] SPEC No.: SWPA120000
Sunlord Specifications for Wire Wound SMD Power Inductor Page 1 of 11 SPECIFICATIONS Customer Product Name Sunlord Part Number Wire Wound SMD Power Inductor SWPA4018S Series Customer Part Number [ New
More informationFrelTec GmbH. Wire Wound SMD Power Inductor SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 5/27/2016 1/20 GmbH www.freltec.com SPECIFICATION Part Number 194 303010 * H * 151 * J * E02 _ Type Size Feature Type Value Toleranc e Packing Optio nal
More informationChip Beads & Inductors
Introduction SAMWHA s CB, CBA, CM, CPI series of chip components consist of compact, high performance beads and inductors. Their innovative components and case structures mean low DC resistance and outstanding
More information(TREC) Wire Wound RF Chip Inductor
Version: February 21, 2017 (TREC) Wire Wound RF Chip Inductor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New
More informationSCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1 (3) CHARACTERISTICS. MSI SERIES Page 1/8 MAG.
SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSI- 700705- R15 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance Code
More informationClassification Contact form Contact type Contact material Enclosure Rating Model Standard DPDT Bifurcated crossbar Ag (Au alloy) Fully sealed G5V-2
Miniature Relay for Signal Circuits ROHS compliant. Wide switching power of 10 µa to 2 A. High dielectric strength coil-contacts:1,000 VAC; open contacts: 750 VAC. Conforms to FCC Part 68 requirements.
More information(1) SHAPES AND DIMENSIONS
Ⅰ. SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSI - 100808 - R15 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance
More information(TREM) High SRFs RF Inductor
Version: March 1, 2017 Electronics Tech. (TREM) High SRFs RF Inductor Web: www.direct-token.com Email: rfq@direct-token.com Direct Electronics Industry Co., Ltd. China: 12F, Zhong Xing Industry Bld., Chuang
More informationLeaded Surface Mount Series 767 Technical Data
Leaded Surface Mount Series 767 Technical Data Features Medium Body Design Solid Ceramic Construction No Internal Dendrite Growth Requires 30% Less Board Space Than Molded Products of the Same Power Rating
More informationCHIP LC FILTERS. Features. Applications. Ordering Information. Shape and Dimensions LC J T (1) (2) (3) (4) (5)
CHIP LC FILTERS Features 1. Newly developed for prominent EMI attenuation at high speed signal line. 2. Terminal electrode has excellent solder heat resistance. Applications 1. High resolution video signal
More informationFrelTec GmbH. Multilayer Ferrite Chip Inductor SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 5/27/2016 1/17 GmbH www.freltec.com SPECIFICATION Part Number 197 05 * 151 * S * J * E02 Type Size Value Material Toleranc e Packing 197 : SMD Multilayer
More informationRMC10,16,20,32,35,50,63 Automotive Grade Page: 1/10
+5 C +35 C 75% Product specification contained in this data sheet are subject to change at any time without notice If you have any questions or a Purchasing Specification for any quality Agreement is necessary,
More informationLEAD FREE CHIP RESISTOR SPECIFICATION
ASJ PTE LTD LEAD FREE CHIP RESISTOR Reference No. : SYS-ENG-205 Revision No. : Z DOC NO: SYS-ENG-205 PAGE: 2 of 40 1.0 SCOPE..... 3 2.0 PART NUMBERING SYSTEM.... 3 3.0 RATING..... 3 3.1 Rating Power....
More informationNotice for TAIYO YUDEN products
Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 2013. All of the contents specified herein
More informationLow Resistance Flat Chip Resistors Type SR73
Low Resistance Flat Chip Resistors Type SR73 1. Scope This specification applies to chip resistors (SR73) produced by KOA Corporation. CERTIFIED AHA 9/29/11 CERTIFIED 2. Type Designation The type designation
More informationEN GWT compliant Low profile: 15.7mm.618inch height 1a/1c 16A power relay
EN6033-1 GWT compliant Low profile: 1.7mm inch height 1a/1c 16A power relay LZ-N RELAYS (ALZN) Protective construction: Flux-resistant type New 12. 28.8.492 RoHS compliant 1.7 (Unit: mm inch) FEATURES
More informationChip Bead UPB Series. Automotive. Part Numbering. Recommend Reflow Profile. AEC-Q200. RoHS Compliant Halogen Free REACH Compliant
AEC-Q2 ohs Compliant Halogen Free EACH Compliant Part Numbering UPB 155 T - 6 Y - AU Series Name Dimensions Code Impedance Packaging (mm) (Ω) Tolerance 155 1.x.5x.5 T Tape and eel 6 6 Y ±25% 1685 1.6x.8x.5
More informationFeatures. Symbol Parameters Test Conditions Min Max Unit V T. TA=25 C Pulse Wave = 10μs, Sine Wave, f=120hz K2201GL 230 V BO K2401GL K2401GL
Standard Bidirectional SIDACs Kxxx1GL Series RoHS Description Schematic Symbol The Multipulse SIDAC is a voltage switch used in Metal- Halide lamp ignition circuits, as well as High Pressure Sodium lamp
More informationData sheet. FIXED RECTANGULAR TYPE RMC10,16,20,32,35 Automotive Grade AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: RMC-1K-17N1011 /1 Date: 2017. 11. 28 Data sheet Title: Style: FIXED RECTANGULAR TYPE RMC10,16,20,32,35 Automotive Grade AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free Note:
More informationCommom Mode Choke CUW Series
RoHS Compliant Halogen Free REACH Compliant Part Numbering CUW 43 T - T - AU Series Name Dimensions Code Inductance Category (mm) (uh) Tolerance 43 4.5x3.2x2.6 T 51 T ±30% M 100 Internal Code Recommend
More informationPART NUMBER: ACTR MHz-DCC6C-75kHz-v1.1 Frequency: MHz
PART NUMBER: ACTR3028-315MHz-DCC6C-75kHz-v1.1 Frequency: 315.000MHz Features 1-port Resonator Provides reliable, fundamental mode, quartz Frequency stabilization i.e. in transmitters or local oscillators
More informationThick Film Chip Resistors Product Specification
1/21 1 Scope This specification is applicable to lead and halogen free RTT series thick film chip resistors. 2 Explanation Of Part Numbers (EX) RTT 03 101 J TP Type Nominal Resistance Resistance Size Tolerance
More informationThis specification applies to the Pb Free high current type SMD inductors for
SCOPE: This specification applies to the Pb Free high current type SMD inductors for MSI-110808V-SERIES- - Warn : This product series can t be used in synchronous rectification circuit that is over 24V.
More informationMultilayer Ferrite Chip Inductor
FEATURES Skywell multiplayer chip inductor is formed without a wound wire and has a closed magnetic circuit formed by simultaneous forming of alternative layers of ferrite paste and conductor paste. High
More informationSRM VDE. REG.-Nr. E932. Cap Diameter (D1, mm) Body Diameter (D2, mm)
D2 VDE REG.-Nr. E932 Specifications Per IEC 605- Features B L D IEC60065 & UL676 Compliant MELF packaging yet capable of high power handling Special conductive film enhances anti-surge capability. Absorbs
More informationChip Bead PBY Series. Automotive. Part Numbering. Recommend Reflow Profile. AEC-Q200. RoHS Compliant Halogen Free REACH Compliant
AEC-Q2 ohs Compliant Halogen Free EACH Compliant Part Numbering PBY 155 T - 4 Y - AU Series Name Dimensions Code Impedance Packaging (mm) (Ω) Tolerance 633.6x.3x.3 T Tape and eel 4 4 Y ±25% 155 1.x.5x.5
More informationThis specification applies to the Pb Free high current type SMD inductors for
SCOPE: This specification applies to the Pb Free high current type SMD inductors for MSI-110812V-SERIES- - Warn : This product series can t be used in synchronous rectification circuit that is over 24V.
More informationType RN73 Series. Thin Film Precision Resistors. Electrical Characteristics. Key Features. Applications
Type RN73 Series Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Terminal finish electroplated 100% matte Sn Applications Communications Industrial Controls
More informationCHIP FERRITE BEADS ARRAY
CHIP FERRITE BEADS ARRAY Features 1. Availabe in a wide range of impedance values and providing excellent EMI suppression characteristics for various types of noise. 2. Line(3,4) is achievable with a single
More informationTeccor brand Thyristors High Energy Bidirectional SIDACs
Kxxx0yH Series RoHS Description The new Kxxx0yH is a higher energy SIDAC switch for gas ignition applications requiring higher current pulse current especially at low repetition rate. It is offered in
More informationHigh Voltage Thick Film Chip Resistors Product Specification
Page No 1/10 1 Scope: 11 This specification is applicable to lead and halogen free for RTV series thick film chip resistors 12 Lead free products mean lead free termination meets RoHS requirement Pb contained
More informationChip Resistors / Chip Arrays
Chip Resistors / Chip Arrays w w w. b o u r n s. c o m I. CR Series Chip Resistors...92 II. CAT/CAY Series Chip Resistor Arrays...96 CAT/CAY 16 Series...96 CAY1 Chip Resistor Array...97 CAY17 Bussed Resistor
More informationType CPF Series. Thin Film Precision Resistors. Key Features
Type CPF Series Key Features Thin film precision resistors with TC's to 15ppm and tolerances to 0.05%. Wide range of case sizes from 0201 to 2512 Suitable for all applications where close accuracy and
More informationSPECIFICATION FOR APPROVAL. Part number Description. : BST-5533S : SMD Magnetic transducer. Country of origin Date Drawn by
SPECIFICATION FOR APPROVAL Part number Description Country of origin Date Drawn by : BST-5533S : SMD Magnetic transducer (RoHS compliance / non washable) : Republic of Korea : 22nd Nov 2011 : Donggyu Kim
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS High-voltage SC type: NP0/X7R (Pb Free & RoHS compliant)
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS High-voltage SC type: (Pb Free & RoHS compliant) 2.2 pf to 4.7 nf Product specification Mar 1, 2007 V. 0 Product specification 2 SCOPE This specification
More informationMetal Film MELF Resistors
FEATURES SURFACE MOUNT IN SIZES 0102 (0805), 0204 (1406) AND 0207 (2410) HIGH RELIABILITY AEC-Q200 QUALIFIED (see part numbering system for details) THIN FILM CONSTRUCTION AVAILABLE IN PRECISION TOLERANCE
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE. AEC-Q200 qualified
Spec. No.: RBX K HTS-1 /2 Date: 217. 4. 21 Data sheet Title: Style: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE RBX16,2,32,35 AEC-Q2 qualified RoHS COMPLIANCE ITEM Halogen
More informationMessrs:Digikey. Preliminary Specifications. Drawing No. Issued Date. Note: Part Number will be revised in case of specification change.
Preliminary Specifications Issued Date. Nov,14,2018 Messrs:Digikey Note: Part Number will be revised in case of specification change. Product Type Series Frequency Quartz Crystal CX2016DB 48000kHz Customer
More informationVectron International Resonator Specification TFR 832 1/5
Vectron International Resonator Specification TFR 832 1/5 Measurement condition Ambient temperature: 25 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
More informationSurface-mounting Relay
Surface-mounting Relay Extremely Thin SPST-NO Flat Relay, One of the Thinnest Relays in the World Dimensions of 7.(W).6(L) 4.2 mm(h) (SMD) or 3.8 mm(h) (TH) represent a reduction of approximately 2% in
More informationShielded Power Inductors
Shielded Power Inductors MN509 Shielded inductor with minimum EMI Minimum power loss Non standard values available Low DC resistance Flat top for SMT operations Specifications Inductance tested at 100KHz
More informationLR Series. Construction. Application. Features
Metal Alloy Low-Resistance Resistor LR Series Construction Application Power supply Battery pack DIY tools Inverter/Converter (AC/DC, DC/DC, DC/AC) Measurable instrument Consumer electronics Note book
More informationRALEC 旺詮. Scope: 2 (EX) request. IE-SP /01/05. Released Date Page No. Remark. Series. Resistance Tolerance. Nominal Resistance.
RTH High Power Thick Film Chip Document No. Released Date Page No. IE-SP-030 2018/01/05 1 1 Scope: 1.1 This specification is applicable to lead-free and halogen-free RTH series high power thick film chip
More information!"#$ % &"#$ ,-././ / 0. / / 1 1/ 1 ' !"%!" "&6 7-- (8$&8+. '(')*+,-+-#+.'
!"#$ % &"#$ '()*'( +!"#$,-,-././ / 0. / / 1 1/ 1 '!"%!"234534 "&6 7-- (8$&8+. "$ "$* '(')*+,-+-#+.' /'**0'(* !"!# $ % &'!!"!# $ % &'! ()#"* +!"!# $, $! "# $ $ %& !"!#$% # %&"!%'' %&%( )"%*! +,- %.&% ".%'
More informationSpecifications. Customer Part Number - Customer Specification Number -
Specifications TO: KED USA Drawing No. UKY1C-H1-14E53-00[37] 1/11 Issued Date. Dec,26,2014 Note:Part Number will be revised in case of specification change. Product Type Quartz Crystal Series CX2016DB
More informationNotice for TAIYO YUDEN products
Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 2012. All of the contents specified herein
More informationThin Film Ultra Precision Resistors
Type RU73 Series Key Features High precision - TCR 2ppm/ C and 3ppm/ C Tolerance down to 0.01% Thin film (nichrome) Available in standard and high power versions Terminal finish electroplated 100% matte
More informationProduct Specification (KYOCERA CORPORATION CERAMIC RESONATOR SPECIFICATION)
Messrs. Digi-Key Product Specification (KYOCERA CORPORATION CERAMIC RESONATOR SPECIFICATION) RoHS compliant CONFIRMED (Please sign here and send one copy back to us.) Specification No. Type Name EQM08-5KC-G5PQ805-00
More informationSelection Series: E24 & E96 E24 & E96 Temp. Coefficient (ppm/ C):
Thin Film Precision Resistors 1206 1210 Rated Power @ 70 C: 0.125W 0.2W Resistance Range (Ohms) Min: 4R7 4R7 4R7 1R0 4R7 1R0 4R7 4R7 4R7 1R0 4R7 1R0 Max: 1M0 2M5 1M0 2M5 1M0 2M5 1M0 2M5 1M0 2M5 1M0 2M5
More informationPowerDI5 10 ± 1. PowerDI5
Mechanical Data Case: PowerDI 5 Case Material: Molded Plastic, Green Molding Compound. UL Flammability Classification Rating 94V-0 Terminals: Finish Matte Tin Plated Leads. Solderable per MIL- STD-0, Method
More informationThin Film Current Sensing Chip Resistor (TCS Series)
(TCS Series) Features -Thin film process -High power rating up to 3 Watts in 2512 size -Tight tolerance down to ±0.5% -Extremely low TCR down to PPM/ C -Resistance values from 50m to 1ohm -High purity
More informationSPECIFICATIONS. CUSTOMER ITEM MODEL NAME PART No DATE 승 인 정식승인 ( ) 한도승인 ( )
승 인 정식승인 ( ) 한도승인 ( ) SPECIFICATIONS ITEM MODEL NAME PART No LINE FILTER NSH-0 LF-UU04-0mH(H-TYPE) 검토심사승인 승인유효기간승인일로부터년 신청회사명 주 소 TEL 02-2689-948 FAX 02-2689-8628 개정이력 MODEL NO NSH-0 PART NO LF-UU04-0mH(H-TYPE)
More information