Specifications For Approval

Transcription

1 Spec No. TT3-ASSC00069 Customer Specifications For Approval Description : Coil Trade Name : UL File No. : E31156 Please return one copy with your approved signature DRAWN CHECKED QC CHECKEDAPPROVED RD CHECKED Date: 00/9/5 TECHNOLOGY (XIAMEN) Co.,LTD 46,XING NAN ROAD,JIMEI,XIAMEN,CHINA TEL:(0086) FAX:(0086)

2 Specifications Classified No. TT3-ASSC SCOPE This specification applies to the Series. MATERIAL AND FINISH The following documents for physical configuration and electrical specification form a part of this specification to the extent specified here in. 3 APPEARANCE The OQ coil shall be tested to be extent of crack, contamination and loss of part by visual inspection. 4 PACKING Packing shall be sufficient to assure against damage to physical configuration and electrical characteristics on loss during shipment. 5 INSPECTION DATA SHEET Inspection data: Must be attached for each Lot. 00/9/5 Supplier of wire be limited, marking revision, UL File No. add. Etc. Customer request 1 00/8/8 Product's packing direction prescribe, Adhesive add. - Edition Date Revision Reason DRAWN CHECKED QC CHECKED APPROVED ISSUED DATE 0-Apr-0

3 Specifications Classified No. 6 ELECTRICAL CHARACTERISTICS TT3-ASSC00069 Inductance DC Resistance Turns ration (at 10kHz 10mV) [Ωmax.] (at 50kHz 1V) [μh Min] (#1-#) (#1-#) (#4-#3) (#1-#):(#3-#4) ±1% HI-POT (between #1-#4 1min ) VAC3000V Thermal Class : 10 (Class E) Operation Temperature Range : -5 to +80 Storage Temperature Range -40 to +10 Storage Humidity : 0%RH Note: (1) Test Condition: Temperature=5±15 /Humidity=60±0%RH () Inspection Data: Must be attached for each lot. DIMENSIONS (UNIT:mm) Circuit Daiagram Typical Land Pattern Marking: Pin 1. white point 040: 0 Year( eg: 0, 08 ) 40 Week(01~5)

4 Specifications Classified No. TT3-ASSC MATERIAL LIST No. Item Trade name Material UL File No. Manufactory name 1 Core 3.05/1./0.6 Ferrite Optional Case CP-J-800 Phenolic E4956 Hitachi Chemical Co., Ltd. 3 Magnet FSX-E Polyurethane E06440 Furukawa Electric Co., Ltd. Wire UEW Enameled Copper E1483 Jung Shing Wire Co., Ltd. Wire 4 Adhesive Silicone Solder Sn95/1Ag/4Cu Pb Free Optional ALPHA Metal Co., Ltd. 9 RELIABILITY No. Item t Condition 1 Thermal shock test -40 ~+85 /1hour 1000cycles Appearance, structure and Cold temperature storage -40 ± 1000h electrical characteristics shall 3 Constant humidity and +60 (90~95)%RH 1000h not be remarkably changed temperature test after testing, and left for 1 4 High temperature storage +130 ± 1000h and hours in room conditions. 5 Vibration test of the speci- Ferquency range:10 to 55Hz(1min.)Amplitude: 1.5mm. mens soldered on the PCB Directions: hours each in X,Y&Z, total 6 hours. 6 Vibration test of the packaginferquency range:10 to 5Hz(1min.)Amplitude: 5mm. Directions: hours each in X,Y&Z, total 6 hours. Shock test of the speci- Acceleration: 1000m/s. Pulse time: 6ms mens soldered on the PCB Directions: 6 times each in X,Y&Z. 8 Shock test of the packaging Acceleration: 1000m/s. Pulse time: 6ms Directions: 3 times each in X,Y&Z. 9 Reflow soldering( soldered) Leadframe condition. Temperature curve. 10 Reflow soldering( no solderedleadframe condition. Temperature curve. 11 Resistance to solding heat Pre-heat at 130 ±,~3 minutes. And soak into a molten solder of 60 ±5 for 10±0.5sec. 1 Solderability Pre-heat at 130 ±,10 minutes. Soldering temperature: 35 ±5 for 5±0.5sec. 13 Robustness of Pins(Pull) Power of pull: 1.0kgf Keep time: 1minute 14 Robustness of Pins(Push) Power of push: 1.0kgf Keep time: 10sec. 15 Packaging dropping test The weight of carton and the hight of dropping G<10 10<G 5 5<G 50 50<G 5 800mm 600mm 450mm 350mm 16 Humidity longevity test The condition: +60 (90~95)%RH DC500V 1 weeks Stop for 4 hours every other 0 hours. 1 Hi-temperature longevity testthe condition: θ=θm- θ AC500V 1 weeks Stop for 4 hours every other 0 hours. Inspection

5 Specifications Classified No. TT3-ASSC SOLDERING PROFILE 10-1 Re-flow Soldering profile 4 Temp. ( ) Pre-Heating Soldering Natural Cooling max sec.min. 160 sec. max. 10 sec.max 50 sec. Time 10- Manual soldering Solder iron temperature : 380±5 Soldering time : 3±1sec.

6 Specifications Classified No. TT3-ASSC PACKAGE DETAILS (1) Reel (UNIT: mm) 5 OQL F W 16 +5/-0 Q'ty (pcs) 3000 max ()Tape P1 P Φ ± A B F E 1 Pin 1 P Unreeling Direction K A ± 0.1 B ± 0.1 K ± 0.1 P ± 0. P1 ± 0.1 P ± 0. E ± 0. F ± 0. OQL Blank:1~0 Trailer Chips Blank:0~5 Leader Cover tape Min:400

7 Specifications Classified No. TT3-ASSC COIL MODEL Quantity 3000 PCS Lot No. / R/N / TECHNOLOGY(XIAMEN)CO.,LTD 1 PACKAGE(UNIT:mm) Per one package : 30,000pcs Box : Cardboard box Number : ten 1 Reel and desiccant is put into the polyvinyle pack. Reel is put into the interior box made from styrene foam parts (inner) Tag label COIL TECHNOLOGY(XIAMEN)CO.,LTD COIL TECHNOLOGY(XIAMEN)CO.,LTD RoHS Tag label 13 TAG LABEL MODEL Q'TY LOT DATE

8 Specifications Classified No. TT3-ASSC STORAGE CONDITIONS Recommended conditions Ambient temperature Bellow 40 Humidity Bellow 0% Shelf Life Coils should be used within 6 months from the time of delivery. Precautions of storage after unpacking Use it within two weeks after opening, in order to prevent degradation of the solderability. Store the leftover product in dry condition with desiccant.