Flammability FEATURES. Cover. Slider C S S T B
|
|
- Lenard Cobb
- 5 years ago
- Views:
Transcription
1 OPAL ELETRONIS OMPAT SLIDE SWITHES SS RoHS compliant INTERNAL STRUTURE Part name Material Flammability FEATURES Low-profile of mm Self-return type available RoHS compliant over Slider Housing Stainless steel (SUS 34) LP(Liquid rystal polymer) UL-94V- APPLIATIONS Mobile stereo LD TV amcorder Slider contact Fixed contact pin opper alloy, Gold-plated Return spring SWP PART NUMBER DESIGNATION S S - T B Series name No. of poles pole No. of contacts contacts 3 contacts Setting position Top setting Side setting Form of packaging T M Self-return function Single Double Shape of terminal BGull wing Through hole pins Please refer to the LIST OF PART NUMBERS when placing orders. Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
2 OPAL ELETRONIS SS OMPAT SLIDE SWITHES LIST OF PART NUMBERS No. of contacts Setting position Self-return function Shape of terminal Form of packaging Part number Pieces in package 3 Side setting Side setting Top setting Single Single Double Double Gull wing Through hole pins Gull wing Through hole pins Gull wing Through hole pins Gull wing Through hole pins Gull wing Through hole pins Through hole pins Through hole pins SS-TB SS-M SS-TB SS-M SS-3TB SS-3M SS-3TB SS-3M SS-3TB SS-3M SS-3M SS-3M,9 pcs./reel 53 pcs./stick,9 pcs./reel 53 pcs./stick,9 pcs./reel,9 pcs./reel,9 pcs./reel STANDARD SPEIFIATIONS ELETRIAL HARATERISTIS Operating temp. range Storage temp. range ~ 7 4 ~ 85 ontact rating Non-switching : D5 V ma Switching : D V ma Minimum : D mv µa Sealing Non washable ontact timing Non-shorting Net weight Approx.. g (SS-), Approx..5 g (SS-3) ontact resistance 7 mω maximum MEHANIAL HARATERISTIS No. of positions, 3 Stroke mm Insulation resistance MΩ minimum (D 5 V) Dielectric strength A5 V 6 s ENVIRONMENTAL HARATERISTIS Operating force Stop strength ~ 3.5 N {. ~.36 kgf} N {. kgf} 5 s Vibration Amplitude.5 mm or Acceleration 98 m/s, -5- Hz, 3 directions for cycles each Solderability Soldering heat 45 ± 3 ~ 3 s Sn-3Ag-.5u Reflow5 ~ 55 (Peak temperature) Please refer to the profile below Manual soldering35 ±, 3 ~ 4 s Shock Load life Humidity 49 m/s, ms, 6 directions for 3 times each ontinuous load cycles, D ±.5 V, ± ma 4, Relative humidity 9 ~ 95 %, 4 h, No load Shear (Adhesion) 5 N {.5 kgf} s High temp. exposure 85, 96 h, No load Substrate bending Width 9 mm, bend 3 mm, 5 s, time Low temp. exposure 4, 96 h, No load Pull-off strength 5 N {.5 kgf} s Thermal shock 4 (.5 h) ~ 85 (.5 h), 5 cycles { } : Reference only Reflow profile for soldering heat evaluation Temperature ( ) Peak : 5 +5 Over 3 Pre Heating Zone 9 ± 3 s 3 ± s 5 Heating time Soldering Zone Reflow : two times maximum Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
3 OPAL ELETRONIS SS OMPAT SLIDE SWITHES OUTLINE DIMENSIONS SS-B SS-B Unless otherwise specified, tolerance : ±.3 (Unit : mm) No..5 No ±. R..5 ±. R ±.5 3 ± ±.5 3 ±.5 ±..6 ± ±.5 7 ±.5.. No ±. R..5 ±.5 3 ±.5 ±..6 ±..5 ±..6 ± ±.5 7 ±.5.. SS-3B SS-3B No ±. R..5 ±.5 3 ±.5 ±..6 ± ±.5.9 ± ±.5.9 ±.5.. SS-3B SS- No ±. R..5 ±. R ±.5 3 ±.5 ± ±.5.9 ±.5.5 ±.5 3 ±.5..6 ±...5 ±. No..5.6 ±...5 Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
4 OPAL ELETRONIS SS OMPAT SLIDE SWITHES OUTLINE DIMENSIONS SS- SS-3 Unless otherwise specified, tolerance : ±.3 (Unit : mm).5 ±. R..5 ±. R ±.5 3 ±.5.5 ±.5 3 ±.5 ±..6 ±. ±..6 ±. No No SS-3 SS-3.5 ±. R..5 ±. R..5 ±.5 3 ±.5.5 ±.5 3 ±.5 ±..6 ±. ±..6 ±. No No SS-3 SS-3 No. 4.5 No ±. R..5 ±. R. ±..5 ±.5 3 ±.5.5 max..6 ± ±..5 ±.5 3 ±.5.5 max..6 ± Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
5 OPAL ELETRONIS SS OMPAT SLIDE SWITHES REOMMENDED P..B. PAD OUTLINE DIMENSIONS SS-B SS-3B SIZE OF P..B. PROESSING SS- (Unit : mm) φ φ PAKAGING SPEIFIATIONS version is packaged in 9 pcs. par reel. version is boxed with reel (9 pcs.). Maximum number of consecutive missing pieces =. Leader length and reel dimension are shown in the diagrams below. Embossed tape dimensions Empty Filled Empty End Head 4 mm min. Direction of feed pitches min. Leader 4 mm min. SS-TB SS-3TB φ.5 ±. 4 ±. ±. 7.5 ±..75 ±..35 ±. Installation example (SS-B) φ.5 ±. 4 ±. ±..35 ±. Installation example (SS-3B) 3.4 Reel dimensions W (Unit: mm) SOLDERING ONDITIONS Manual soldering 35 3 s maximum ±.5 φ 3 ± Infrated reflow soldering Label φ ±.8 Temperature ( ) 5 5 Pre heating 5 ~ 8 9 ± 3 s Peak 45 ~ 5 3 ± s Part number Part number Quantity / Stick 5 Time TB φ 33 ± 7.4 ±.4 ± φ 8 ± 3TB φ 33 ± 5.4 ± 9.4 ± φ 8 ± A N SS-3 SS-3. φ φ ±..75 ±..75 φ.6 Direction of feed Direction of feed 3.4 W 6.6 Top setting Side setting length : 5 ± mm long Packing quantity of magazine Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
CMS SLIDE SWITCHES (SMD) FEATURES PART NUMBER DESIGNATION CMS T B. Please refer to the LIST OF PART NUMBERS when placing orders.
SLIDE SWITHES (SMD) MS RoHS compliant INTERNAL STRUTURE FEATURES Part name over Slider Housing Slider contact Fixed contact Material Steel (SP), Tin-plated Polyamide opper alloy, Gold-plated Flammability
More informationCMS SLIDE SWITCHES (SMD) COPAL ELECTRONICS CMS T B FEATURES PART NUMBER DESIGNATION. RoHS compliant INTERNAL STRUCTURE.
OPAL ELETRONIS SLIDE SWITHES (SMD) MS RoHS compliant INTERNAL STRUTURE 7 FEATURES RoHS compliant Excellent contact stability by twin Gold-plated contact mechanism Load life of, cycles ompatible with automatic
More informationSA-7000 ROTARY CODED SWITCHES (SMD) S A T A FEATURES PART NUMBER DESIGNATION COPAL ELECTRONICS. RoHS compliant. 1 Marking cover 2 3 4
OPL ELETRONIS ROTRY ODED SWITHES (SMD) S- RoHS compliant INTERNL STRUTURE Part name Material Flammability FETURES RoHS compliant Low profile of. mm Wide variety (top or side setting, or positions, J-hook,
More informationSINGLE TURN COPAL ELECTRONICS S T T A Ω ( 1 2 ) FEATURES PART NUMBER DESIGNATION
SINGLE TURN INTERNAL STRUCTURE 7 6 5 4 9 8 FEATURES Lead-free soldering, Cadmium-free Top and side adjustment styles Rotor with a cross slot for ease of adjustment Leaded terminals provide strong as adhesive
More informationS-1000A/2000A ROTARY CODED SWITCHES S A W FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders.
ROTARY ODED SWITHES S-A/A RoHS compliant INTERNAL STRUTURE S-A / A series FEATURES Part name Housing ontact Terminal pin Base O ring Material Polybutyleneterephthalate opper alloy, Gold-plated Polybutyleneterephthalate
More information4mm Surface Mount, Single-Turn, Sealed Cermet Trimmers
Effective Date April 5 TOCOS POTENTIOMETERS 4mm Surface Mount, Single-Turn, Sealed Cermet Trimmers RoHS Compliant IMPROVED DESIGN Pb-Free and Cd-Free Features 4mm square SMD, single-turn, sealed cermet
More informationLow Resistance Flat Chip Resistors Type SR73
Low Resistance Flat Chip Resistors Type SR73 1. Scope This specification applies to chip resistors (SR73) produced by KOA Corporation. CERTIFIED AHA 9/29/11 CERTIFIED 2. Type Designation The type designation
More informationThick Film Resistor Networks, Dual-In-Line, Medium Body, Small Outline, Molded DIP, Surface Mount
Thick Film Resistor Networks, Dual-In-Line, Medium Body, Small Outline, Molded DIP, Surface Mount FEATURES Isolated, bussed and dual terminator schematics available 4, 6, or 2 terminal package Molded case
More informationA S J ASJ PTE LTD LEAD FREE THIN FILM CHIP RESISTOR SPECIFICATION. Reference No. : SYS-ENG-209. Revision No. : D
ASJ PTE LTD LEAD FREE THIN FILM CHIP Reference No. : SYS-ENG-209 Revision No. : D DOC NO: SYS-ENG-209 PAGE: 2 of 24 1.0 SCOPE...... 3 2.0 PART NUMBERING SYSTEM...... 3 3.0 RATING....... 3 3.1 Rated Power......
More informationThick Film Resistor Networks, Dual-In-Line, Medium Body, Small Outline, Molded DIP, Surface Mount
Thick Film Resistor Networks, Dual-In-Line, Medium Body, Small Outline, Molded DIP, Surface Mount FEATURES Isolated, bussed and dual terminator schematics available 4, 6, or 2 terminal package Molded case
More informationB3F. Miniature, Space-saving Switch
B3F Miniature, Space-saving Switch Long mechanical / electrical service life Ideal for applications such as audio, office and communications equipment, TVs, etc Taped radial, vertical, high-force, and
More information6x6 mm Thinner Type Tactile Switches (Pitch 4.5 mm) ACTUATOR COLOR & OPERATING FORCE: Black, 100gf Brown, 160gf Red, 260gf
TP6GM... TP6GMB... 2.5 TP6M... General Tolerance ±0.2mm How to order: TP6 1 2 3 5 6 7 1 GROUND TERMINAL: Blank Without Ground Terminal G With Ground Terminal 5 A K C ACTUATOR COLOR & OPERATING FORCE: Black,
More informationMetal Foil Low Resistance Chip Resistor MFF Series
Page No. 1/8 Metal Foil Low Resistance Chip Resistor MFF Series Application Features Entertainment Low Resistance / TCR / EMF/Inductance Power supply Excellent long term stability Measuring instrument
More informationChip Inductor INTRODUCTION FEATURE AND APPLICATION. Feature. Application
INTRODUCTION Multilayer Chip Inductor is an electronic part that uses in resonance circuit, for noise suppression and for impedance matching in the electrical circuit. SAMSUNG Electro-mechanics has 2 series
More informationRMC10,16,20,32,35,50,63 Automotive Grade Page: 1/10
+5 C +35 C 75% Product specification contained in this data sheet are subject to change at any time without notice If you have any questions or a Purchasing Specification for any quality Agreement is necessary,
More informationData sheet. FIXED RECTANGULAR TYPE RMC10,16,20,32,35 Automotive Grade AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: RMC-1K-17N1011 /1 Date: 2017. 11. 28 Data sheet Title: Style: FIXED RECTANGULAR TYPE RMC10,16,20,32,35 Automotive Grade AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free Note:
More informationVI TELEFILTER Filter specification TFS 915D 1/5
Filter specification TFS 915D 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The maximum attenuation
More informationVectron International Filter specification TFS 737 1/5
Vectron International Filter specification TFS 737 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The
More informationVectron International Filter specification TFS1255A 1/5
Vectron International Filter specification TFS1255A 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: m Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The
More informationPowerDI5 10 ± 1. PowerDI5
Mechanical Data Case: PowerDI 5 Case Material: Molded Plastic, Green Molding Compound. UL Flammability Classification Rating 94V-0 Terminals: Finish Matte Tin Plated Leads. Solderable per MIL- STD-0, Method
More informationLeaded Surface Mount Series 767 Technical Data
Leaded Surface Mount Series 767 Technical Data Features Medium Body Design Solid Ceramic Construction No Internal Dendrite Growth Requires 30% Less Board Space Than Molded Products of the Same Power Rating
More informationCHIP LC FILTERS. Features. Applications. Ordering Information. Shape and Dimensions LC J T (1) (2) (3) (4) (5)
CHIP LC FILTERS Features 1. Newly developed for prominent EMI attenuation at high speed signal line. 2. Terminal electrode has excellent solder heat resistance. Applications 1. High resolution video signal
More informationVectron International Filter specification TFS /5
Vectron International Filter specification TFS 1795 1/5 Measurement condition Ambient temperature: 2 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The maximum
More informationVectron International Filter specification TFS 1575AA 1/5
Vectron International Filter specification TFS 1575AA 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
More informationVI TELEFILTER Preliminary specification TFS 1575N 1/5
VI TELEFILTER Preliminary specification TFS 1575N 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The
More informationHVR. Lead Wire Length (H, mm)
High Resistor Features Special conductive film withstands high voltage d L H D working voltage far over that of generalpurpose resistors Suitable for applications such as TV s, high voltage power supply,
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPEIFIATIONS Features and Benefits Board-mounting pegs provide
More informationPackage View SOT363. c L SOT363
PAKAE INFORMATION Mechanical Data Package View Surface Mount Package ase Material: Molded Plastic, UL Flammability lassification Rating 94V-0 Terminals: Finish Matte Tin Plated Leads, Solderable per MIL-STD-202,
More informationDATA SHEET SHUNT RESISTOR PU series 5%, 1% sizes 2512/ 3921/ 5931
Product specification November 23, 2017 V.4 DATA SHEET SHUNT RESISTOR PU series 5%, 1% sizes 2512/ 321/ 531 RoHS compliant & Halogen free Product specification 2 SCOPE This specification describes shunt
More informationVectron International Filter specification TFS1590 1/5
Vectron International Filter specification TFS1590 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
More informationVectron International Filter specification TFS455D 1/5
Vectron International Filter specification TFS455D 1/5 Measurement condition Ambient temperature To: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The
More informationVI TELEFILTER Filter specification TFS /5
VI TELEFILTER Filter specification TFS 2100 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The maximum
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE. AEC-Q200 qualified
Spec. No.: RBX K HTS-1 /2 Date: 217. 4. 21 Data sheet Title: Style: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE RBX16,2,32,35 AEC-Q2 qualified RoHS COMPLIANCE ITEM Halogen
More informationVI TELEFILTER Filter specification TFS 248F 1/5
VI TELEFILTER Filter specification TFS 248F 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 200 Ω Characteristics Remark: The reference
More informationVectron International Filter specification TFS1575AG 1/5
Vectron International Filter specification TFS1575AG 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark:
More informationSp e c i f i c a t i o n
K M Y Last update: 2013.12.1 No.RMC-K-HTS-0006-8 (Uncontrolled copy) Sp e c i f i c a t i o n (Reference) Style: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE RMC1/32,1/20,1/16S,1/16,1/10,1/8,1/4,1/2,1
More informationTeccor brand Protection Thyristors Surface Mount
Q2L Series (C-Rated) SIDACtor SLIC Device The Q2L SIDACtor SLIC series provides unidirectional transient voltage protection in a low profile, Chip Scale Package (CSP). The small package QFN (Quad Flatpak
More informationCompact Flat Size Relay for Automotive. (Unit: mm inch)
Compact Flat Size Relay for Automotive CP RELAYS Sealed 13.1.1 9..374 13.1.1 1..413 FEATURES Compact flat type PC board terminal type: 9. mm.374 inch Compact and High
More informationDATASHEET. It needs tuning process for customer s device. AMOTECH
Document Datasheet Type Dielectric Chip Antenna Application 1575.42 & 1592~1610MHz Part No. AMAN1003015ST03 Revision 1.0 DATASHEET Application GPS(1575.42 MHz) & Glonass (1592~1610 MHz) Features PIFA Structure
More informationLEAD FREE CHIP RESISTOR SPECIFICATION
ASJ PTE LTD LEAD FREE CHIP RESISTOR Reference No. : SYS-ENG-205 Revision No. : Z DOC NO: SYS-ENG-205 PAGE: 2 of 40 1.0 SCOPE..... 3 2.0 PART NUMBERING SYSTEM.... 3 3.0 RATING..... 3 3.1 Rating Power....
More informationLR Series. Construction. Application. Features
Metal Alloy Low-Resistance Resistor LR Series Construction Application Power supply Battery pack DIY tools Inverter/Converter (AC/DC, DC/DC, DC/AC) Measurable instrument Consumer electronics Note book
More informationCRYSTAL RESONATORS (JAPAN) 1B326000AB0AR (INDONESIA) 1C326000AB0AR RECEIPT. Serial No. : DATE : 2008/12/08 ITEM : C.ENG. ENG.
Serial No. : 2008-1640 DATE : Shanghai SIM Technology Group ITEM : CRYSTAL RESONATORS DSX321G 26.000MHz ---------------------------------------------------------------------------------------------------------------------------------
More informationVectron International Filter specification TFS 867A 1/5
Vectron International Filter specification TFS 867A 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
More informationVectron International Filter specification TFS140AV 1/5
Vectron International Filter specification TFS140AV 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: * Input: 50 Ω -78 pf Output: 95 Ω -52 pf Characteristics
More informationVectron International Filter specification TFS 243E 1/5
Vectron International Filter specification TFS 243E /5 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: * Input: 350 Ω -3.8 pf Output: 350 Ω -3.8 pf Characteristics
More informationDATA SHEET SHUNT RESISTOR PU series 5%, 1% sizes 3921/ 5931
Product specification January 16, 2017 V.2 DATA SHEET SHUNT RESISTOR PU series 5%, 1% sizes 321/ 531 RoHS compliant & Halogen free Product specification 2 SCOPE This specification describes shunt resistor
More informationVectron International Filter specification TFS 600 1/5
Vectron International Filter specification TFS 600 /5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 270 Ω -0,8 pf Output: 285 Ω -0,8 pf Characteristics
More informationVectron International Filter specification TFS 400P 1/5
Vectron International Filter specification TFS 400P /5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 280 Ω -6, pf Output: 440 Ω -5,2 pf Characteristics
More informationInstallation Precautions
Installation Precautions 1. Lead orming (1) Avoid bending the leads at the base and ensure that the leads are fixed in place. (2) Bend the leads at a point at least 2mm away from the base. (3) orm the
More informationRoHS INPAQ TECHNOLOGY CO., LTD. LFA0805 SERIES (LC Filter Array) Engineering Specification
LFA0805 SERIES (LC Filter Array) 1. Scope This specification is applicable to LC Filter Array series product. The customer designed part number drawing take precedence over this specification. The LC Filter
More informationVectron International Filter specification TFS /5
Vectron International Filter specification TFS 1960 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
More informationVectron International Filter specification TFS 942G 1/5
Vectron International Filter specification TFS 942G 1/5 Measurement condition Ambient temperature: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The
More informationData sheet ESD SUPPRESSOR; RECTANGULAR TYPE. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
No.: HSPC K HTS 0001 /4 Date: 2017. 4. 21 Data sheet Title: Style: HSPC10, 16 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free Note: Stock conditions Temperature: +5 C +35 C Relative humidity:
More informationModel BD3238N5050AHF. Ultra Low Profile 0404 Balun
Model BD338N55AHF Ultra Low Profile 44 Balun 5Ω to 5Ω Balanced Description The BD338N55AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and
More informationVectron International Filter specification TFS 1227A 1/5
Vectron International Filter specification TFS 1227A 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω 0 pf Output: 50 Ω 0 pf Characteristics
More informationCRYSTAL RESONATOR
: : ITEM : CRYSTAL RESONATOR DSX211SH 26.000MHz --------------------------------------------------------------------------------------------------------------------------------- (TAIWAN) --------------------------------------------------------------------------------------------------------------------------------
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More information507-1A H - - C. Features. Type List. Ordering Information
Type List Standard type Teral style Contact form High rating iature PCB Relay. AC & DC coil are both available. UL/CUL and VDE approved. 7A 77VAC SPDT. Low profile mm and high insulation system class.
More informationCRYSTAL RESONATOR. DSX321G MHz
: : ITEM : CRYSTAL RESONATOR DSX321G 37.400MHz --------------------------------------------------------------------------------------------------------------------------------- JAPAN: INDONESIA: ---------------------------------------------------------------------------------------------------------------------------------
More informationWire Wound Chip Inductors LPI0805FT Series
INTRODUCTION Product : LPI Miniature SMD Inductor For Power Line Size : 0805 The LPI series are low profile inductor used in notebook, PC, cellular phone backlight, inverter and etc. The devices are designed
More informationVectron International Filter specification TFS /5
Vectron International Filter specification TFS 2096 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 200 Ω -0.38 pf Output: 75 Ω Characteristics
More informationVectron International Filter specification TFS 125P 1/5
Vectron International Filter specification TFS 125P 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 115 Ω -21 pf Output: 110 Ω -35 pf Characteristics
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationVectron International Filter specification TFS 868P 1/5
Vectron International Filter specification TFS 868P 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 80 Ω -1.7 pf Output: 80 Ω -1.7 pf Characteristics
More informationSIDACtor Protection Thyristors Broadband Optimized TM Protection. Q2L Series - 3x3 QFN. Description
Q2L Series - 3x3 QN RoHS Pb e3 Description Q2L Series 3x3 QN are low capacitance SIDACtor thyristors designed to protect high density broadband equipment from damaging overvoltage transients. The series
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationWIRE WOUND CHIP INDUCTORS HCI SERIES HCI 0805 F T 1R0 K - Introductions. Features. Part Number Code HCI SERIES
HCI SERIES WIRE WOUND CHIP INDUCTORS HCI SERIES Introductions Product : HCI Miniature SMD Inductor For Power Line Size : 0805 The HCI series are low profile inductor used in notebooks, PC s, Cellular phone
More informationVectron International Filter specification TFS 400L 1/5
Vectron International Filter specification TFS 400L 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 200 Ω Output: 200 Ω Characteristics Remark:
More informationReturn loss (db) Insertion loss (db) .56±.06 TBD. GND / DC Feed 1 + RF GND 2. Unbalanced Port Balanced Port Balanced Port.
Model BD6N5AHF Ultra Low Profile 44 Balun 5Ω to Ω Balanced Description The BD6N5AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output
More informationVI TELEFILTER Filter specification TFS 130C 1/5
VI TELEFILTER Filter specification TFS 130C 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 130 Ω -11.6 pf Output: 86 Ω -11.8 pf Characteristics
More informationVectron International Filter specification TFS /5
Vectron International Filter specification TFS 2653 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 27,66 Ω -0,01 pf Output: 27,66 Ω -0,01 pf
More informationThin Film Current Sensing Chip Resistor (TCS Series)
(TCS Series) Features -Thin film process -High power rating up to 3 Watts in 2512 size -Tight tolerance down to ±0.5% -Extremely low TCR down to PPM/ C -Resistance values from 50m to 1ohm -High purity
More informationVectron International Filter specification TFS 522 1/5
Vectron International Filter specification TFS 522 1/5 Measurement condition Ambient temperature (T 0): 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
More informationCP RELAYS POWER TYPE. TYPICAL APPLICATIONS Defoggers, Ignitions, Heaters, Accessories, Powered windows, etc. ORDERING INFORMATION TYPES
High Carrying Current Type Miniature Low Profile Automotive Relay CP RELAYS POWER TYPE Sealed 13.1 14.1 9..374 FEATURES Maximum carrying current of 3 A (4 mw type, 1 V applied)
More informationVectron International Filter specification TFS180L 1/5
Vectron International Filter specification TFS180L 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 205.51 Ω -23.24 pf Output: 141.63 Ω - 31.49
More informationVectron International Filter specification TFS /5
Vectron International Filter specification TFS 2533 1/5 Measurement condition Ambient temperature: 23 C Input power level: dbm Terminating impedance: * Input: 27,22 Ω -,32 pf Output: 27,22 Ω -,32 pf Source:
More informationVI TELEFILTER Filter specification TFS 70Z 1/5
VI TELEFILTER Filter specification TFS 70Z /5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 850 Ω -4,5 pf Output: 490 Ω -4, pf Characteristics
More informationThin Film Precision Chip Resistor (AR Series)
Features Advanced thin film technology Very tight tolerance down to ±0.01% Extremely low down to ±5PPM/C Wide resistance range 1ohm ~ 3Mega ohm Miniature size 0201 available Thin Film Precision Chip Resistor
More informationSRM VDE. REG.-Nr. E932. Cap Diameter (D1, mm) Body Diameter (D2, mm)
D2 VDE REG.-Nr. E932 Specifications Per IEC 605- Features B L D IEC60065 & UL676 Compliant MELF packaging yet capable of high power handling Special conductive film enhances anti-surge capability. Absorbs
More informationTO: Digi-Key. Specifications. Drawing No. K /11. Note:In case of specification change, KYOCERA Part Number also will be changed.
Specifications Drawing No. K1101-13745-372 1/11 Issued Date. Jan,23,2014 TO: Digi-Key Note:In case of specification change, KYOCERA Part Number also will be changed. Product Name Quartz Crystal Product
More informationLOW-PROFILE SURFACE-MOUNT RELAY. Characteristics. Initial breakdown voltage. Initial surge voltage. Temperature rise* 2 (at 20 C) Max.
TESTING LOW-PROFILE SURFACE-MOUNT RELAY RELAYS 5.6. mm inch FEATURES Low-profile: 6 mm.36 inch in height comforming to EIA standards (Tape height: max. 6.5 mm.56 inch ) Tape and reel package is available
More informationProduct Specification - LPM Connector Family
LPM Product Specification - LPM OVERVIEW Developed for mobile devices and other space-constrained applications, the Neoconix LPM line of connectors feature exceptional X-Y-Z density with a simple, highly
More informationSpecifications. Customer Part Number - Customer Specification Number -
Specifications TO: Digi-Key Drawing No. UKY1C-H1-14406-01[43] 1/10 Issued Date. Jul,16,2014 This part is qualified for Silicon Labs Si534x series. Note:In case of specification change, KYOCERA Part Number
More informationModel PD0409J7575S2HF
Model PD49J77SHF Ultra Low Profile 8 Power Divider 7Ω to 7Ω Description The PD49J77SHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49J77SHF is
More informationVectron International Filter specification TFS 281 1/5
Vectron International Filter specification TFS 281 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 183 Ω -12.5 pf Output: 172 Ω -12.6 pf Characteristics
More informationModel PD0409J5050S2HF
Model PD49JSHF Ultra Low Profile 8 Power Divider Ω to Ω Description The PD49JSHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49JSHF is ideal for
More informationModel PD3150J5050S2HF
Model PD315J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD315J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD315J55S2HF
More informationType CPF Series. Thin Film Precision Resistors. Key Features
Type CPF Series Key Features Thin film precision resistors with TC's to 15ppm and tolerances to 0.05%. Wide range of case sizes from 0201 to 2512 Suitable for all applications where close accuracy and
More informationTO: Digi-Key. Specifications. Drawing No. UKY1C-H [43] 1/11 Issued Date.
Specifications Drawing No. UKY1C-H1-14569-00[43] 1/11 Issued Date. May,16,2014 TO: Digi-Key Note:In case of specification change, KYOCERA Part Number also will be changed. Product Name Quartz Crystal Product
More informationVI TELEFILTER Filter Specification TFS 70U - 1/5
Filter Specification TFS 70U - 1/5 1. Measurement condition : Ambient temperature T A: 23 C. Input power level: 0 dbm. Terminating impedances in f c : for input: 50 Ω 0 pf. for output: 50 Ω 0 pf. 2. Characteristics
More informationFPC CONNECTORS Y3FT (0.3 mm pitch) with FPC tabs
AYF31 FPC CONNECTORS FOR FPC CONNECTION FPC CONNECTORS Y3FT (0.3 mm pitch) with FPC tabs (Former Name: YF31) FEATURES 1. Low-profile, space-saving design (pitch: 0.3mm) The 0.9mm height, 3.0mm depth contributes
More information1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
1.7mm pitch, Low Profile Wire-to-oard onnectors for Power Supplies DF Series (UL, -UL, Listed) Lock structure and operation Socket Latch Header Latches are deflected slightly during mating. Features 1.
More informationPreliminary. Product Specification (KYOCERA CORPORATION CERAMIC RESONATOR SPECIFICATION) Messrs. RoHS compliant. Approved by. Checked by.
Messrs. Preliminary Product Specification (KYOCERA CORPORATION CERAMIC RESONATOR SPECIFICATION) RoHS compliant Specification No. Type Name PRQC16.00SR1010V00L T0 Oct, 22, 2013 Approved by T.Sugihara Checked
More informationICL Series SMD Wirewound Chip Open-Type Inductors - ICL0603, ICL0805
SMD Wirewound Chip Open-Type s - ICL0603, ICL0805 CONFIGURATIONS: FEATURES Lower profile,high frequency Higher possible SRFs as well as excellent Q Value Higher current in compact size Customer design
More informationVectron International Filter specification TFS 1632A 1/5
Vectron International Filter specification TFS 1632A 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 183 Ω -0,42 pf Output: 45 Ω -0,47 pf Characteristics
More informationINPAQ. Specification. WIP201610S L Series. Product Name. Power Inductor. Global RF/Component Solutions
WIP201610S L Series Specification Product Name Series Power Inductor WIP201610S L Series Size EIAJ 2016 WIP201610S L Series Engineering Specification 1. Scope Feature High saturation current realized by
More informationVectron International Resonator Specification TFR 832 1/5
Vectron International Resonator Specification TFR 832 1/5 Measurement condition Ambient temperature: 25 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
More informationCR0603/CR0805/CR Chip Resistors
*RoHS COMPLIANT Features RoHS compliant* Power rating at 7 C: CR63 -.1 W, CR85 -.125 W, CR126 -.25 W Tight tolerances of bottom electrode width Suitable for all types of soldering processes Three layer
More informationElectrical Specifications. Insertion to +85 TOP VIEW SIDE VIEW BOTTOM VIEW. Pin 2. Yantel Corporation
Description The is a low profile, high performance 20dB directional coupler. It is designed for DCS & PCS applications. This component is suitable for feed-forward amplifier and signal sampling circuits
More information