YAGEO CORPORATION SMD INDUCTOR / BEADS
|
|
|
- Julian Francis
- 5 years ago
- Views:
Transcription
1 YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SSL53HC Series These series have been specially designed for high current, low voltage DC-DC converter applications. This simple, rugged design provides current ratings normally available only in much larger packages - up to 16Arms for a.33µh part. With its tinned self-leaded construction, the SSL84HC achieves very low DCR values and excellent solderability. In addition to the standard parts shown, custom values are also available. These inductors are less than.2 (5mm) high. They have very low resistance and a rugged selfleaded construction. Features For high current, low voltage DC-DC converter applications. Applications Notebook computers, Sep-up and step-down converters, memory programmers. etc... PRODUCT IDENTIFICATION SSL - - International No. Tolerance Inductance High Current Dimensions Product Symbol Packaging: T: Tape and Reel, B : Bulk Tolerance: M: ±2% Note: YAGEO will start to release SSL_HC Series inductors with lead-free terminals which meet SONY SS-259's criteria for lead-free product in Q2 of 24, and YAGEO Internal No will be changed to N as identification. Ex. SSL53HC-R56M-N Electrical Characteristics PART NO. INDUCtance SRF ** DC Isat *** Irms **** (µh ± 2%) * (MHz) RESISTANCE (A) (A) (Ω) Max. SSL53HC-R56M-S SSL53HC-1R2M-S SSL53HC-2R2M-S SSL53HC-4R7M-S SSL53HC-1M-S SSL53HC-15M-S SSL53HC-22M-S SSL53HC-33M-S shapes and dimensions st nd. 3rd. 5. SSL53HC-47M-S * Inductance Tested at.25 Vrms, 1 KHz ** SRF measured using HP8753D network analyzer. *** Inductance Drop = 3% Typ. at Isat. **** T = 4 C Typ at Irms. Operating Temperature Range -4 C to +85 C Electrical Specifications at 25 C Dimensions : mm
2 277 ELECTRICAL CHARACTERISTICS : Lead-free & rohs compliance PART NO. Inductance ToleranCE Rdc Isat Irms srf (Ω) (A) (A) (nh) (±%) (KHz)Typ. SSL53HC-R18 -N SSL53HC-R56 -N SSL53HC-1R2 -N SSL53HC-2R2 -N SSL53HC-4R7 -N SSL53HC-1 -N SSL53HC-15 -N SSL53HC-22 -N SSL53HC-33 -N SSL53HC-47 -N NOTE : -tolerance M=±2% / T=±3% 1.Operating temperature range -4 C~85 C 2.Inductance drop 3% typ. at last 4. T=4 C rise typ.at Irms. "-N"FOR COMPLETELY LEAD FREE TYPE(INCLUDING FERRITE BODY & SOLDER) RECOMMEND SOLDERING CONDITIONS for:cl/ CLH/ SQV/ SMD power inductors/ SMD Chip Beads/ SMD Filters, Transformers, Current Sensors temperature C pre-heating soldering natural cooling 26 C 23 C 16 C 15 C 6 second time:second 12 second 8 second 5~1 second for: lead solder for: lead-free solder
3 YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SSL84HC Series These series have been specially designed for high current, low voltage DC-DC converter applications. This simple, rugged design provides current ratings normally available only in much larger packages - up to 16Arms for a.33µh part. With its tinned self-leaded construction, the SSL84HC achieves very low DCR values and excellent solderability. In addition to the standard parts shown, custom values are also available. Features For high current, low voltage DC-DC converter applications. PRODUCT IDENTIFICATION SSL - - International No. Tolerance Inductance High Current Dimensions Product Symbol Packaging: T: Tape and Reel, B:Bulk Tolerance: M: ±2% Note: YAGEO will start to release SSL_HC Series inductors with lead-free terminals which meet SONY SS-259 s criteria for lead-free product in Q2 of 24, and YAGEO Internal No will be changed to N as identification. Ex. SSL53HC-R56M-N shapes and dimensions These inductors are less than.2 (5mm) high. They have very low resistance and a rugged selfleaded construction. Applications Notebook computers, Sep-up and step-down converters, memory programmers. etc... Electrical Characteristics PART NO. INDUCtance SRF ** DC Isat *** Irms **** (µh ± 2%) * (MHz) RESISTANCE (A) (A) (Ω) Max. SSL84HC-R33M-S SSL84HC-R68M-S SSL84HC-1RM-S SSL84HC-1R5M-S SSL84HC-2R2M-S SSL84HC-2R7M-S SSL84HC-3R3M-S SSL84HC-4R7M-S SSL84HC-6R8M-S st. Significant Digit 8.38 SSL84HC-1M-S SSL84HC-15M-S SSL84HC-22M-S nd. Significant Digit 3rd. Multiplier SSL84HC-33M-S SSL84HC-47M-S SSL84HC-68M-S SSL84HC-11M-S * Inductance Tested at.1 Vrms, 1 KHz ** SRF measured using HP8753D network analyzer *** Inductance Drop = 1% Typ. at Isat. **** T = 4 C Typ at Irms. Dimensions : mm Operating Temperature Range -4 C to +85 C Electrical Specifications at 25 C
4 279 ELECTRICAL CHARACTERISTICS : Lead-free & rohs compliance PART NO. Inductance ToleranCE Rdc Isat Irms srf (Ω) (A) (A) (nh) (±%) (KHz)Typ. SSL84HC-R33 -N SSL84HC-R68 -N SSL84HC-1R -N SSL84HC-1R5 -N SSL84HC-2R2 -N SSL84HC-2R7 -N SSL84HC-3R3 -N SSL84HC-4R7 -N SSL84HC-6R8 -N SSL84HC-1 -N SSL84HC-15 -N SSL84HC-22 -N SSL84HC-33 -N SSL84HC-47 -N SSL84HC-68 -N SSL84HC-11 -N NOTE : -tolerance M=±2% / T=±3% 1.Operating temperature range -4 C~85 C 2.Inductance drop 1% typ. at last 4. T=4 C rise typ.at Irms. "-N"FOR COMPLETELY LEAD FREE TYPE(INCLUDING FERRITE BODY & SOLDER) RECOMMEND SOLDERING CONDITIONS for:cl/ CLH/ SQV/ SMD power inductors/ SMD Chip Beads/ SMD Filters, Transformers, Current Sensors temperature C pre-heating soldering natural cooling 26 C 23 C 16 C 15 C 6 second time:second 12 second 8 second 5~1 second for: lead solder for: lead-free solder
5 YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SSL136HC Series These series have been specially designed for high current, low voltage DC-DC converter applications. This simple, rugged design provides current ratings normally available only in much larger packages - up to 16Arms for a.33µh part. With its tinned self-leaded construction, the SSL84HC achieves very low DCR values and excellent solderability. In addition to the standard parts shown, custom values are also available. These inductors are less than.2 (5mm) high. They have very low resistance and a rugged selfleaded construction. Features For high current, low voltage DC-DC converter applications. Applications Notebook computers, Sep-up and step-down converters, memory programmers. etc... PRODUCT IDENTIFICATION SSL - - International No. Tolerance Inductance High Current Dimensions Product Symbol Packaging: T: Tape and Reel, B:Bulk Tolerance: M: ±2% Note: YAGEO will start to release SSL_HC Series inductors with lead-free terminals which meet SONY SS-259's criteria for lead-free product in Q2 of 24, and YAGEO Internal No will be changed to N as identification. Ex. SSL53HC-R56M-N shapes and dimensions Electrical Characteristics PART NO. INDUCtance SRf dc Isat ** Irms *** (µh ± 2%) * (MHz) RESISTANCE (A) (A) (Ω) Max. SSL136HC-R78M-S SSL136HC-1R5M-S SSL136HC-2R2M-S SSL136HC-3R3M-S SSL136HC-3R9M-S SSL136HC-4R7M-S SSL136HC-6RM-S st. Significant Digit 2nd. Significant Digit 3rd. Multiplier SSL136HC-7R8M-S SSL136HC-1M-S SSL136HC-15M-S * L : Tested at.1 Vrms, 1 KHz (HP-4192A) ** Isat : Inductance Drop = 1% Typ *** T = 4 C Typ at Irms. Operating Temperature Range -4 C to +85 C 8. Dimensions : mm
6 281 ELECTRICAL CHARACTERISTICS : Lead-free & rohs compliance PART NO. Inductance ToleranCE Rdc Isat Irms srf (Ω) (A) (A) (nh) (±%) (KHz)Typ. SSL136HC-R78 -N TYP SSL136HC-1R5 -N TYP SSL136HC-2R2 -N TYP SSL136HC-3R3 -N TYP. 1 6 SSL136HC-3R9 -N TYP SSL136HC-4R7 -N TYP SSL136HC-6R -N TYP SSL136HC-7R8 -N TYP SSL136HC-1 -N TYP SSL136HC-15 -N TYP NOTE : -tolerance M=±2% / T=±3% 1.Operating temperature range -4 C~85 C 2.Inductance drop 1% typ. at last 3. T=4 C rise typ.at Irms. "-N"FOR COMPLETELY LEAD FREE TYPE(INCLUDING FERRITE BODY & SOLDER)
7 282 Tape Dimensions TAPE MATERIAL Carrier Tape : Polystyrene Cover Type : Polyethylene P P2 K K E W D Plastic Paper P Cover Tape 16mm Min. Blank Part Chip Mounting Part Blank 33mm Min. Leader REEL DIMENSIONS Recommended Pattern Land Pattern A C B A B D D C TYPE TAPE RECOMMENDEd REEL QUANTITY dimensions pattern dimensions /REEL k D E W P P P2 unit A B c D A B C D SSL53HC In mm SSL84HC In mm SSL136HC In mm Dimensions : mm
8 283 ssl SERIES RELIABILITY TEST 1-1 MECHANICAL PERFORMANCE NO. ITEM SPECIFICATION TEST CONDITIONS Vibration Appearance : No Damage Test device shall be soldered on the substrate. L Change : within ±1% Oscillation Frequency : 1 to 55 to 1Hz for 1Min. Q Change : within ±3% Amplitude : 1.5mm RDC : within Specification Time : 2Hrs. for each Axis (X, Y & Z), Total 6Hrs Resistance to Appearance : No Damage Pre-heating : 15 C, 1Min. Soldering Heat Solder Composition : Sn/Pb = 63/37 Solder Temperature : 26 ± 5 C Immersion Time : 1 ± 1Sec Solderability The electrodes shall be at least 9% covered Pre-heating : 15 C, 1Min. with new solder coating. Solder Composition : Sn/Pb = 63/37 Solder Temperature : 23 ± 5 C Immersion Time : 4 ± 1Sec. 1-2 ENVIRONMENTAL PERFORMANCE NO. ITEM SPECIFICATION TEST CONDITIONS Temperature Shock Appearance : No Damage 1 Cycles (Air to Air) 1 Cycles shall Consist of : L Change : within ±1% 3Min. Exposure to -55 C L Change : within ±3% 3Min. Exposure to 125 C RDC : within Specification 15Sec. Max. Transition between Temperatures Measured after Exposure in the Room Condition for 24Hrs Temperature Cycle One Cycle Step Temperature ( C) Time (Min.) 1-25 ± ± ± ± 2 3 Total : 1 Cycles Measured after Exposure in the Room Condition for 24Hrs Humidity Resistance Temperature : 4 ± 2 C Relative Humidity : 9 ~ 95% Time : 1Hrs. Measured after Exposure in the Room Condition for 24Hrs High Temperature Temperature : 85 ± 3 C Resistance Relative Humidity : 2% Applied Current : Rated Current Time : 1Hrs. Measured after Exposure in the Room Condition for 24Hrs Low Temperature Temperature : -25 ± 3 C Resistance Relative Humidity : % Time : 1Hrs. Measured after Exposure in the Room Condition for 24Hrs.
9 284 typical electrical characteristics Curves of SSL Series SSL53HC, INDUCTANCE vs. FREQUENCY CHARACTERISTICS 3 SSL53HC, Q vs. FREQUENCY CHARACTERISTICS uH uH uH uH 5 4.7uH FREQUENCY (khz) 1 4.7uH IDC(A) SSL84HC, INDUCTANCE vs. FREQUENCY CHARACTERISTICS uH SSL84HC, Q vs. FREQUENCY CHARACTERISTICS 25 22uH uH 1uH 1 1.5uH uH FREQUENCY (khz) IDC(A) SSL136HC, INDUCTANCE vs. FREQUENCY CHARACTERISTICS 4 35 SSL136HC, Q vs. FREQUENCY CHARACTERISTICS 18 15uH uH 1uH 4.7uH uH 4.7uH FREQUENCY (khz) IDC(A)
10 285 RECOMMEND SOLDERING CONDITIONS for:cl/ CLH/ SQV/ SMD power inductors/ SMD Chip Beads/ SMD Filters, Transformers, Current Sensors temperature C pre-heating soldering natural cooling 26 C 23 C 16 C 15 C 6 second time:second 12 second 8 second 5~1 second for: lead solder for: lead-free solder
YAGEO CORPORATION SMD INDUCTOR / BEADS. Notebook computers, step-up and step-down converters. Flash memory programmers, etc...
YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SDS0402 Series These shielded ultra-miniature inductors can help designers achieving significantly longer battery life in handheld communication
YAGEO CORPORATION SMD INDUCTOR / BEADS. SLF Series. Features. Low resistance and high currents
YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SLF Series Features Low resistance and high currents Designed for low - profile type with low Rdc and large current. The magnetic shielded type
Cal-Chip Electronics, Inc.
Cal-Chip Electronics, Inc. Feature: These new SSL Series is designed for the smallest possible size, low cost and high performance. It's high energy storage and very low DC resistance offer higher saturated
WIRE WOUND CHIP INDUCTORS HCI SERIES HCI 0805 F T 1R0 K - Introductions. Features. Part Number Code HCI SERIES
HCI SERIES WIRE WOUND CHIP INDUCTORS HCI SERIES Introductions Product : HCI Miniature SMD Inductor For Power Line Size : 0805 The HCI series are low profile inductor used in notebooks, PC s, Cellular phone
Wire Wound Chip Inductors LPI0805FT Series
INTRODUCTION Product : LPI Miniature SMD Inductor For Power Line Size : 0805 The LPI series are low profile inductor used in notebook, PC, cellular phone backlight, inverter and etc. The devices are designed
Power Inductors, Shielded
The Shielded Power are low profile, surface-mount inductors. They are designed for power applications or high current applications. Key Features High reliability and easy surface mount assembly Low loss
SPECIFICATION FOR APPROVAL INDEX
SPECIFICATION FOR APPROVAL INDEX COVER PAGE INDEX. 0 SHAPES & DIMENSION. 1 PART NUMBER CODE 1 PRODUCT DETAIL 2-3 REEL DIMENSIONS 4 REEL PACKAGING QUANTITY 4 RELIABILITY AND TEST CONDITION.. 5 RECOMMENDED
Shielded Power Inductors TL1010SG Series
Form Rev- /5/ Shielded Power Inductors TLSG Series FEATURES Low DCR and excellent current handling Operating temperature range: C to +5 C with Irms current, +5 C to +5 C with derated current Storage temperature
Power Inductor MHCC/MHCI Series
RoHS Compliant Halogen Free REACH Compliant Part Numbering MHCI 42-1R M - R8AU Series Name Dimensions Code Inductance (mm) (uh) Tolerance Internal Code 412 4.1x4.6x1.2 R22.22 M ±2% R8AU 42B 4.2x4.7x2.
Sunlord Wire Wound SMD Power Inductor Page 1 of 7 SPECIFICATIONS
Sunlord Wire Wound SMD Power Inductor Page 1 of 7 SPECIFICATIONS Customer Product Name Wire Wound SMD Power Inductor Sunlord Part Number SWPA4020S T Customer Part Number [ New Released, Revised] SPEC No.:
WIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
ICL Series SMD Wirewound Chip Open-Type Inductors - ICL0603, ICL0805
SMD Wirewound Chip Open-Type s - ICL0603, ICL0805 CONFIGURATIONS: FEATURES Lower profile,high frequency Higher possible SRFs as well as excellent Q Value Higher current in compact size Customer design
WIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
WIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
Kun Shan MAZO tech Co., Ltd
Page : 1 / 1 High Current, Power Inductors MPCA-63-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 7.3x6.8x 3.mm maximum surface mount package Powder iron core material
Power Inductor SCD Series
RoHS Compliant Halogen Free REACH Compliant Part Numbering SCD 321 T - 1R M - AU Series Name Dimensions Code Inductance Internal Code (mm) (uh) Tolerance 321 3.3x3.x2.1 R47.47 K ±1% 43 4.5x4.x3.2 1R 1.
Kun Shan MAZO tech Co., Ltd
Page : 1/9 High Current, Power Inductors LPCA-14-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 11.5x1.3x 4.mm maximum surface mount package Powder iron core material
(TRMA) Multilayer Ferrite Beads Chip Inductors. Token Electronics Industry Co., Ltd. Version: January 13, Web:
Version: January 13, 2017 (TRMA) Multilayer Ferrite Beads Chip Inductors Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District,
SMT Ferrite Chip Inductor SFI201212S Series
Part : SFI201212S SERIES Version : AD Page : 1 / 7 Feature SMT Ferrite Chip Inductor SFI201212S Series Utilizing a miniaturized winding structure. These products provide high Q characteristics. Resin coated
Wire Wound Chip Inductor Low Profile Type LWL LWL1008. Features. Applications
Wire Wound Chip Inductor Low Profile Type Wire Wound Chip Inductor Low Profile Type Features Ceramic base provides high SRF Ultra-compact inductors provide high Q factors Miniature SMD chip inductor for
WIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
IWHQSeries FEATURES ORDERING CODE. SMD Wirewound Open-Type Chip Inductors (High Q /Frequency) 0805 TRIGON COMPONENTS
CONFIGURATIONS: FEATURES Low DC resistance design is ideal for low loss, high output and low power consumption. Especially high Q factor in this series for customer s design. Resin-coated surface enables
Kun Shan MAZO tech Co., Ltd
Page : 1 / 8 High Current, Power Inductors MPCA-412-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 4.75 x 4.45 x 1.2mm maximum surface mount package Powder iron core
INPAQ. Specification. WIP201610S L Series. Product Name. Power Inductor. Global RF/Component Solutions
WIP201610S L Series Specification Product Name Series Power Inductor WIP201610S L Series Size EIAJ 2016 WIP201610S L Series Engineering Specification 1. Scope Feature High saturation current realized by
INDEX. ISO-9002 Certified YAGEO CORPORATION
INDE 2 Multilayer Ferrite Chip Beads [ SB/PB/UP/NB/GB Series ] 22 Multilayer Ferrite Chip Beads [ BA Series ] 26 Surface Mount Beads [ FB Series ] 3 EMI PC Beads [ SBC Series ] 33 Data Line EMI Filter
MICRO INDUCTORS. Features. Applications. Ordering Information. Shape and Dimensions MI - I J J T (1) (2) (3) (4) (5) (6) (7)
MICRO INDUCTORS Features 1. Very high Self-Resonant Frequencies 2. Ultra miniature size and light(0.6mm mm mm). No polarity 4. Terminal electrode has excellent solder heat resistance for soldering. 5.
Commom Mode Choke CUW Series
RoHS Compliant Halogen Free REACH Compliant Part Numbering CUW 43 T - T - AU Series Name Dimensions Code Inductance Category (mm) (uh) Tolerance 43 4.5x3.2x2.6 T 51 T ±30% M 100 Internal Code Recommend
Multilayer Chip Bead CBM0805. Multilayer Chip Bead. Features. Applications. Constructions
Multilayer Chip Bead Features Effective EMI protection Low DC resistance High soldering heat resistance Multiple size availability RoHS compliant Applications Computers and Peripheral Equipment VCRS, Television
Chip Inductor INTRODUCTION FEATURE AND APPLICATION. Feature. Application
INTRODUCTION Multilayer Chip Inductor is an electronic part that uses in resonance circuit, for noise suppression and for impedance matching in the electrical circuit. SAMSUNG Electro-mechanics has 2 series
This specification applies to the Pb Free high current type SMD inductors for
SCOPE: This specification applies to the Pb Free high current type SMD inductors for MSI-110808V-SERIES- - Warn : This product series can t be used in synchronous rectification circuit that is over 24V.
Approval sheet. WQCW1005 SMD Wire Wound Ceramic Chip Inductors AEC-Q200. *Contents in this sheet are subject to change without prior notice.
WCW1005 SMD Wire Wound Ceramic Chip Inductors AEC-200 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WCW1005 Series_V4.0_Auto Jun. 2017 FEATURES 1. Ceramic structure
This specification applies to the Pb Free high current type SMD inductors for
SCOPE: This specification applies to the Pb Free high current type SMD inductors for MSI-110812V-SERIES- - Warn : This product series can t be used in synchronous rectification circuit that is over 24V.
SCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1
SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MNR - 4010-4R7 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance Code
SPECIFICATION FOR APPROVAL
Ⅰ. Configuration and dimensions: REV. 20160715-P PAGE 1/8 Marking Inductance code A' C H F A A' C E F G H 3.20 ±0.4 2.90 ±0.2 2.50 ±0.2 2.20 ±0.2 ±0.2 +0.3 0.60-0.0 1.80 1.40 Ⅱ. Description: a. Ferrite
SCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1 (3) CHARACTERISTICS. MSI SERIES Page 1/8 MAG.
SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSI- 700705- R15 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance Code
Shielded SMD Power Inductor
101 Features Dimensions Unit: mm -Directly connected electrode on ferrite core -Available in magnetically shielded -Low DC resistance -Suitable for large current -Available on tape and reel for auto surface
(1) SHAPES AND DIMENSIONS
Ⅰ. SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSI - 100808 - R15 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance
HP1, HPH1 HP2, HPH2 HP3, HPH3 HP4, HPH4 HP5, HPH5 HP6, HPH6. Winding Layout. Middle 11. Inner
Document - HP, HPH HP, HPH HP, HPH HP, HPH HP, HPH HP, HPH Six : isolated windings that can be connected in series or parallel Tightly coupled windings Power range: 0 Watts as inductor and flyback transformer;
(TRMB) Multilayer Bead RF Inductors. Token Electronics Industry Co., Ltd. Version: January 13, Web:
Version: January 13, 2017 (TRMB) Multilayer Bead RF Inductors Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New
Wire Wound Chip Inductor
Features Ceramic base provide high Ultra-compact inductors provide high Q factors ow profile, high current options Miniature SMD chip inductor for fully automated assembly Outstanding endurance from Pull-up
SCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1 (3) CHARACTERISTICS. MSCDRI-104R-SERIES Page 1/8 MAG.
SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSCDRI - 104R - 100 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance
Chip Beads & Inductors
Chip Beads & Inductors Introduction Chip Components Guide SAMWHA s CB, CBA,CM, CD series of chip components consist of compact, high performance beads and inductors. Their innovative components and case
SCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1
SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSCH - 5750C - 100 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance
SMD High Frequency Power Inductor. Designed for VRD & VRM 10.x & 11.x Applications
Designed for VRD & VRM 1.x & 11.x Applications FEATURES Recommended for use with all major Voltage Regulator ICs High Current handling capability in the smallest footprint Up to 2MHz operating frequency
Low Profile High Current Shielded Inductor TL2020SG11 (5.49x5.18x3.0mm)
ow Profile High Current Shielded Inductor TSG (.9x.x3.mm) FEATURES: APPICATIONS: owest height (3.mm) in this package footprint PDA/notebook/desktop/server applications Operating temperature range - C to
Multilayer Ferrite Chip Inductor
FEATURES Skywell multiplayer chip inductor is formed without a wound wire and has a closed magnetic circuit formed by simultaneous forming of alternative layers of ferrite paste and conductor paste. High
(TREC) Wire Wound RF Chip Inductor
Version: February 21, 2017 (TREC) Wire Wound RF Chip Inductor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New
Configurations: Dimension (mm) 1.6 ±0.15 IMPC IMPC ± IMPC ±0.2 IMPC IMPC ± IMPC ±0.
SMD Multilayer Power Inductors IMPC160808, IMPC201206, IMPC201210, IMPC201212, IMPC201610, IMPC252010, IMPC252012, IMPC321606, IMPC322510 Configurations: FEATURES Magnetically shielded configuration for
Chip Bead UPB Series. Automotive. Part Numbering. Recommend Reflow Profile. AEC-Q200. RoHS Compliant Halogen Free REACH Compliant
AEC-Q2 ohs Compliant Halogen Free EACH Compliant Part Numbering UPB 155 T - 6 Y - AU Series Name Dimensions Code Impedance Packaging (mm) (Ω) Tolerance 155 1.x.5x.5 T Tape and eel 6 6 Y ±25% 1685 1.6x.8x.5
Inductors for Power Circuits
Inductors for Power Circuits Wound/STD magnetic shielded SPM series Type: SPM3012 (3.2x3.0 mm) SPM5030 (5.2x5.0 mm) SPM6530 (7.1x6.5 mm) Issue date: March 2012 Conformity to RoHS Directive: This means
SPECIFICATIONS. Wire Wound SMD Power Inductor SWPA4018S Series Customer Part Number. [ New Released, Revised] SPEC No.: SWPA120000
![SPECIFICATIONS. Wire Wound SMD Power Inductor SWPA4018S Series Customer Part Number. [ New Released, Revised] SPEC No.: SWPA120000](/thumbs/89/100532504.jpg "SPECIFICATIONS. Wire Wound SMD Power Inductor SWPA4018S Series Customer Part Number. [ New Released, Revised] SPEC No.: SWPA120000")
Sunlord Specifications for Wire Wound SMD Power Inductor Page 1 of 11 SPECIFICATIONS Customer Product Name Sunlord Part Number Wire Wound SMD Power Inductor SWPA4018S Series Customer Part Number [ New
SRR6038 Series - Shielded SMD Power Inductors
*RoHS COMPLIANT Features Height of. mm max. Current rating up to. A RoHS compliant* Applications Input/output of DC/DC converters Power supplies for: Portable communication equipment Camcorders LCD TVs
January Inductors for power circuits. Wound metal. SPM-HZ series (for automotive) SPM6530-HZ type SPM6530-HZ
I N D U C T O R S January 2018 Inductors for power circuits Wound metal SPM-HZ series (for automotive) SPM6530-HZ (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request
Low Profile High Current Shielded Inductors
ow Profile High Current Shielded Inductors TSG51 FEATURES: APPICATIONS: ow height (. mm) PDA/notebook/desktop/server applications Operating temperature range - 55 C to + C High current PO converters Frequency
RF CERAMIC CHIP INDUCTORS
RF CERAMIC CHIP INDUCTORS High frequency multi-layer chip inductors feature a monolithic body made of low loss ceramic and high conductivity metal electrodes to achieve optimal high frequency performance.
Chip Beads & Inductors
Introduction SAMWHA s CB, CBA, CM, CPI series of chip components consist of compact, high performance beads and inductors. Their innovative components and case structures mean low DC resistance and outstanding
Molding Power Choke HPPC Series. HPPC Series. Product Identification
HPPC Series HPPC series is low profile molding power choke with low RDC and high Q factor, so the efficiency performance is also superior. Its molded magnetic shielded type is suitable for high-density
FP1005R High frequency, high current power inductors
Supersedes December 2008 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) Server and desktop Central processing unit (CPU) Graphics
SPECIFICATION FOR APPROVAL PAGE: 1
PAGE: 1 CONFIGURATION & DIMENSIONS A A : 2.5±0.2 B : 2.0±0.1 C : 1.8±0.1 B E : 1.4±0.1 Not Marking F : 0.40 C 0. 1.5 0.9 1.5 0.9 F F E PCB Pattern SCHEMATIC DIAGRAM d MATERIALS a Core Ferrite DR core b
RF WIREWOUND CHIP INDUCTORS
RF WIREWOUND CHIP INDUCTORS These high frequency High-Q chip inductors feature a monolithic body made of low loss ceramic wound with wire to achieve optimal high frequency performance. These RF chip inductors
Low Resistance Flat Chip Resistors Type SR73
Low Resistance Flat Chip Resistors Type SR73 1. Scope This specification applies to chip resistors (SR73) produced by KOA Corporation. CERTIFIED AHA 9/29/11 CERTIFIED 2. Type Designation The type designation
SRP1038A Series - Shielded Power Inductors
*RoHS and AEC-Q COMPLIANT 131 Features Shielded construction Carbonyl powder core High saturation current Inductance range:. to 7 µh AEC-Q compliant RoHS compliant* and halogen free** SRP13A Series - Shielded
Chip Bead PBY Series. Automotive. Part Numbering. Recommend Reflow Profile. AEC-Q200. RoHS Compliant Halogen Free REACH Compliant
AEC-Q2 ohs Compliant Halogen Free EACH Compliant Part Numbering PBY 155 T - 4 Y - AU Series Name Dimensions Code Impedance Packaging (mm) (Ω) Tolerance 633.6x.3x.3 T Tape and eel 4 4 Y ±25% 155 1.x.5x.5
DCR DCR. Irms Isat. Max. Typ. Recommended Layout 5.2 (.205) 2.2 (.087) NATURAL COOLING
*RoHS COMPLIANT & AEC APPROVED R7 Features Shielded construction Carbonyl powder core High saturation current Low profile - 1. mm Inductance range:.1 to 1 µh AEC-Q qualified RoHS compliant* and halogen
CHIP LC FILTERS. Features. Applications. Ordering Information. Shape and Dimensions LC J T (1) (2) (3) (4) (5)
CHIP LC FILTERS Features 1. Newly developed for prominent EMI attenuation at high speed signal line. 2. Terminal electrode has excellent solder heat resistance. Applications 1. High resolution video signal
CHIP COIL (CHIP INDUCTORS) LQG15HS 02D REFERENCE SPECIFICATION
P.1/11 CHIP COIL (CHIP INDUCTORS) LQG15HS 02D REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQG15HS_02 series, for Chip Coil (Chip Inductors). 2. ing (ex) LQ G 15 H S 1N0 S 0
Vectron International Temperatur sensor specification TFSS434B 1/6
Vectron International Temperatur sensor specification TFSS434B 1/6 Measurement condition Ambient temperature: 85 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics
Low Profile High Current Shielded Inductor TL2525SG01 (6.86x6.47x3mm)
ow Profile High Current Shielded Inductor TSG (6.86x6.7xmm) FEATURES: APPICATIONS: ow profile, height only (. mm) PDA/notebook/desktop/server applications Operating temperature range - C to + C High current
High. FXL1350-XXX-M Power Choke R 0 1 / 9. Page : Applications. material. Powder iron core. Frequency range. up to 5MHz RoHS compliant.
1 / 9 High Current, Power Inductors FXL135-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 13.8x19x 5.mmm maximum surface mount package Powder iron core material Magnetically
FP2207R High frequency, high current power inductors
Technical Data 10673 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and highpower density VRMs Server and desktop Central processing
DRA Series High Power Density, High Efficiency, Shielded Inductors. Magnetics Solutions For Automotive Applications
For utomotive pplications Description 65 C maximum total temperature operation Five sizes of utomotive grade shielded drum core inductors Inductance range from.8uh to uh Current range up to 56 mps Mechanical
RF Inductor Series. Token Electronics Industry Co., Ltd. Version: February 24, Web:
Version: February 24, 2017 RF Inductor Series Web: www.token.com.tw Email: rfq@token.com.tw Token Electronics Industry Co., Ltd. Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New Taipei City, Taiwan,
FP2 Low profile, high current power inductors
Supersedes July 014 FP Low profile, high current power inductors Product description High current carrying capacity Dual conductors allow for low inductance and high current or high inductance and lower
(TREM) High SRFs RF Inductor
Version: March 1, 2017 Electronics Tech. (TREM) High SRFs RF Inductor Web: www.direct-token.com Email: rfq@direct-token.com Direct Electronics Industry Co., Ltd. China: 12F, Zhong Xing Industry Bld., Chuang
FrelTec GmbH. Wire Wound SMD Power Inductor SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 5/27/2016 1/20 GmbH www.freltec.com SPECIFICATION Part Number 194 303010 * H * 151 * J * E02 _ Type Size Feature Type Value Toleranc e Packing Optio nal
CR0603/CR0805/CR Chip Resistors
*RoHS COMPLIANT Features RoHS compliant* Power rating at 7 C: CR63 -.1 W, CR85 -.125 W, CR126 -.25 W Tight tolerances of bottom electrode width Suitable for all types of soldering processes Three layer
FrelTec GmbH. Multilayer Ferrite Chip Inductor SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 5/27/2016 1/17 GmbH www.freltec.com SPECIFICATION Part Number 197 05 * 151 * S * J * E02 Type Size Value Material Toleranc e Packing 197 : SMD Multilayer
10 nh Inductor (Top View)
SMD High- RF Inductor nh Inductor (Top View) ACCU- TECHNOOGY The SMD Inductor is based on thin-film mul ti lay er technology. This technology provides a level of control on the elec tri cal and physical
DRQ Series Dual Winding, Shielded Inductors/Transformer
Description 5 C maximum total temperature operation Dual winding inductors that can be used as either a single inductor, or in coupled inductor/transformer applications (: turns ratio) Four sizes of shielded
Vectron International Temperatur sensor specification TFSS433D 1/6
Vectron International Temperatur sensor specification TFSS433D 1/6 Measurement condition Ambient temperature: 85 C Input power level: 0 dbm Terminating impedance: Input: 50 Output: 50 Characteristics Remark:
November Inductors for power circuits. Wound metal. SPM series. SPM10040 type SPM10040
I N D U C T O R S November 2017 Inductors for power circuits Wound metal SPM series SPM10040 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
Data sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE. AEC-Q200 qualified
Spec. No.: RBX K HTS-1 /2 Date: 217. 4. 21 Data sheet Title: Style: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE RBX16,2,32,35 AEC-Q2 qualified RoHS COMPLIANCE ITEM Halogen
SMD Shielded Wire Wound Power Inductor. TIS4D28QES Series. Features. Applications. Dimensions
SMD Shielded Wire Wound Power Inductor SMD Shielded Wire Wound Power Inductor Features Magnetically shielded construction Compact and thin Large current and low DCR RoHS Compliant Applications DC-DC converter
WF12T, WF08T, WF06T, WF04T 0.5%, 0.1% TC50 High Precision Thin Film chip resistors Size 1206, 0805, 0603, 0402
SPECIFICATION OF HIGH PRECISION THIN FILM CHIP RESISTOR Ver: Page: of 8 ROHS compliance WF2T, WF08T, WF06T, WF04T 0.5%, 0.% TC50 High Precision Thin Film chip resistors Size 206, 0805, 0603, 0402 SPECIFICATION
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS High-voltage SC type: NP0/X7R (Pb Free & RoHS compliant)
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS High-voltage SC type: (Pb Free & RoHS compliant) 2.2 pf to 4.7 nf Product specification Mar 1, 2007 V. 0 Product specification 2 SCOPE This specification
HCM1103 High current power inductors
Supersedes June 2012 Applications Product features 11.5 x 10.3 x 3.0 mm maximum surface mount package Iron powder core material Magnetically shielded, low EMI High current carrying capacity, low core losses
Data sheet. FIXED RECTANGULAR TYPE RMC10,16,20,32,35 Automotive Grade AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: RMC-1K-17N1011 /1 Date: 2017. 11. 28 Data sheet Title: Style: FIXED RECTANGULAR TYPE RMC10,16,20,32,35 Automotive Grade AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free Note:
Reference Only. This reference specification applies to LQP03HQ_02 series, Chip coil (Chip Inductors). (ex) LQ P 03 H Q 0N5 B 0 2 D
P.1/12 CHIP COIL (CHIP INDUCTORS) LQP03HQ 02D Reference Specification 1.Scope This reference specification applies to LQP03HQ_02 series, Chip coil (Chip Inductors). 2.ing (ex) LQ P 03 H Q 0N5 B 0 2 D Product
February Inductors for power circuits. Wound metal. SPM series. SPM5030 type SPM5030
I N D U C T O R S February 2018 Inductors for power circuits Wound metal SPM series SPM5030 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
May Inductors for Power Circuits. Wound Metal. SPM Series. SPM6530 Type SPM6530
I N D U C T O R S May 2017 Inductors for Power Circuits Wound Metal SPM Series SPM6530 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
3D COIL 15x15 10mH ±5% 125 KHz SMD DROP RESISTANT TRANSPONDER 3D COIL 15.9x15.9 mm
1/7 3D COIL 15x15 10mH ±5% 125 KHz SMD DROP RESISTANT TRANSPONDER 3D COIL 15.9x15.9 mm Made by: Sergio Cobos Checked by: S. Cobos Approved by: F. Bustos Date: 20/02/12 Date: 20/02/12 Date: 12/03/2012 Signature:
Reference Only. 2.Part Numbering (ex) LQ P 03 T N 0N6 B 0 2 D
P.1/12 CHIP COIL (CHIP INDUCTORS) LQP03TN 02D REFERENCE SPECIFICATION 1.Scope This reference specification applies to LQP03TN_02 series, Chip coil (Chip Inductors). 2.ing (ex) LQ P 03 T N 0N6 B 0 2 D Product
May Inductors for Power Circuits. Wound Metal. SPM Series. SPM12565XTType SPM12565XT
May 2016 Inductors for Power Circuits Wound Metal SPM Series SPM12565XTType SPM12565XT (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
MULTILAYER CHIP INDUCTORS
CONTENTS PAGE GENERAL INFORMATION.............................................................. 243 HIGH FREQUENCY - L63H.......................................................... 245 HIGH FREQUENCY -
August Inductors for power circuits. Wound metal. SPM-LR series. SPM5015-LR type SPM5015-LR
I N D U C T O R S August 2017 Inductors for power circuits Wound metal SPM-LR series SPM5015-LR (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
SMD High Frequency Power Inductor. Designed for Utility Regulator Applications
FEATURES Recommended for use with all major Voltage Regulator ICs High Current handling capability in the smallest footprint Up to 2MHz operating frequency Extended operating temperature range: -4C to
July Inductors for power circuits. Wound metal. SPM series. SPM10040XTType SPM10040XT
I N D U C T O R S July 2017 Inductors for power circuits Wound metal SPM series SPM10040XTType SPM10040XT (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery
SPECIFICATION FOR APPROVAL. 1/32W, Low Resistance Chip Resistor (Lead / Halogen free)
PAGE : 1 OF 7 1/32W, 01005 Low Resistance Chip Resistor (Lead / Halogen free) 1. Scope This specification applies 0.2mm x 0.4mm (01005) size 1/32W, fixed metal film chip resistors rectangular type for
SPECIFICATION FOR APPROVAL. 1/2W, 0603, Low Resistance Chip Resistor (Lead / Halogen free)
PAGE : 1 OF 7 1/2W, 0603, Low Resistance Chip Resistor (Lead / Halogen free) 1. Scope This specification applies to 0.8mm x 1.6mm size 1/2W, fixed metal film chip resistors rectangular type for use in
ITEM : CHIP POWER INDUCTORS APPROVAL SHEET CHIP POWER INDUCTORS CUSTOMER : DATE :
ESTABLISHMENT 2006. 06. 16 APPROVED REVISION 2006. 12. 19 Series NO:IP061219001 APPROVAL SHEET CHIP POWER INDUCTORS CUSTOMER : DATE : You can reapprove only the changed quality request recorded in spec