Kun Shan MAZO tech Co., Ltd

Transcription

1 Page : 1 / 1 High Current, Power Inductors MPCA-63-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 7.3x6.8x 3.mm maximum surface mount package Powder iron core material Magnetically shielded, low EMI High current carrying capacity, Low core losses Frequency range up to 5MHz RoHS compliant Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Smart phone POL modules SSD modules Notebook regulators Battery power systems Graphics cards Data networking and storage systems Environmental Data Storage temperature range: -55 C to +125 C Operating temperature range: -55 C to +125 C (ambient plus self-temperature rise) Solder reflow temperature: J-STD-D compliant Description MPCA-63-1R5-M 1.5μH ± % Model Inductance Value Inductance Tolerance Global Part Number M P C A R 5 M Product Series Dimensions Inductance Value Tol.

2 Page : 2 / 1 Inductance DC Resistance Heating Rating Current Saturation Current Part No. L (μh) DCR (mω) Idc (A) Isat (A) ± %, khz, 1V TYP. MAX. TYP. TYP. MPCA-63-R1-M MPCA-63-R22-M MPCA-63-R24-M MPCA-63-R33-M MPCA-63-R47-M MPCA-63-R56-M MPCA-63-R68-M MPCA-63-R82-M MPCA-63-1R-M MPCA-63-1R5-M MPCA-63-2R2-M MPCA-63-3R3-M MPCA-63-4R7-M MPCA-63-5R6-M MPCA-63-6R8-M MPCA-63-8R2-M MPCA-63--M MPCA M MPCA-63-2-M MPCA M Notes 1. All test data is referenced to 25 C ambient 2. Operating temperature range - 55 C to C 3. Idc(A):DC current (A) that will cause an approximate ΔT of C(reference ambient temperature is 25 C ) 4. Isat(A):DC current (A) that will cause L to drop approximately 3 % 5. The part temperature (ambient + temp rise) should not exceed 125 C under worst case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application.

3 Page : 3 / 1 Dimensions-mm Marking The inductor is marked with a 3-digit code Example R5 Note:Using Ink for marking

4 Page : 4 / 1 Performance Graphs Test Instruments Wayne kerr 32B/G LCR Meter Wayne kerr 3265B Bias Current Source Test Condition Temperature: 26 ± 3 Humidity: < 7% RH Frequency: KHz, 1.V.1 MPCA-63-R1-M.22 MPCA-63-R22-M MPCA-63-R24-M.33 MPCA-63-R33-M MPCA-63-R47-M.56 MPCA-63-R56-M

5 Page : 5 / 1.68 MPCA-63-R68-M.82 MPCA-63-R82-M MPCA-63-1R-M 1.5 MPCA-63-1R5-M MPCA-63-2R2-M 3.3 MPCA-63-3R3-M

6 Page : 6 / MPCA-63-4R7-M 5.6 MPCA-63-5R6-M MPCA-63-6R8-M 8.2 MPCA-63-8R2-M MPCA-63--M 15 MPCA M

7 Page : 7 / 1 22 MPCA-63-2-M 33 MPCA M

8 Page : 8 / 1 Mechanical Reliability Item Specification and Requirement Test Method Solderability The surface of terminal immersed shall be minimum of 95% covered with a new coating of solder Solder heat proof: 1. Preheating: 1 ± 1 2. Retention time: 245 ± 5 for 2 ±.5 seconds 1. Vibration frequency: Vibration (1 Hz to 55 Hz to 1Hz) in seconds as a period Inductance change: Within ± 1% 2. Vibration time: Without mechanical damage such as Period cycled for 2 hours in each of 3 mutual break perpendicular directions. 3. Amplitude: 1.5 mm max. 1. Peak value: G Shock Inductance change: Within ±1% Without 2. Duration of pulse: 11ms mechanical damage such as break 3. 3 times in each positive and negative direction of 3 mutual perpendicular directions Endurance Reliability Item Specification and Requirement Test Method 1. Repeat cycles as follow: (-55 ± 2 ; 3 ± 3 min) (Room temp., 5 min) Thermal Inductance change: Within ± 1% (+125 ± 2, 3 ± 3 min) Shock Without distinct damage in appearance (Room temp., 5 min) 2. Recovery: / - hours of recovery under the standard condition after the test. High 1. Environment condition: 85 ± 2 Inductance change: Within ± 1% Temperature Applied Current: Rated current Without distinct damage in appearance Resistance 2. Duration: + 4 / - hours 1. Environment condition: ± 2 Humidity Resistance Inductance change: Within ± 1% Without distinct damage in appearance Humidity: 9 95% Applied Current: Rated current 2. Duration: + 4 / - hours Low Inductance change: Within ± 1% Store temperature: Temperature Without distinct damage in appearance -55 ± 2, + 4 / - hours Store High Inductance change: Within ± 1% Store temperature: Temperature Without distinct damage in appearance +125 ± 2, + 4 / - hours Store

9 Page : 9 / 1 Tape Packaging Dimensions A B K t 7.2±.1 7.5±.1 3.6±.15.31±.5 Reel Dimensions

10 Page : 1 / 1 Peel force of top cover tape The peel speed shall be about 3mm/minute The peel force of top cover tape shall be between.1 to 1.3 N Numbers of taping 15pieces/reel Label making The following items shall be marked on the production and shipping Label on the reel Production Labe Part No Description Quantity Produce No Taping No Shipping Label (1)*Customer's name (2)*Customer's part No (3)Manufacturer's part No (4)Manufacturer's name (5) Manufacturer's country