HCMA1305 Automotive grade High current power inductors

Size: px

Start display at page:

Download "HCMA1305 Automotive grade High current power inductors"

Alban Floyd
5 years ago
Views:

Automotive grade High current power inductors Supersedes August 2014 Product features AEC-Q200 qualified High current carrying capacity Low core losses Magnetically shielded, low EMI Frequency range

1 Automotive grade High current power inductors Supersedes August 2014 Product features AEC-Q200 qualified High current carrying capacity Low core losses Magnetically shielded, low EMI Frequency range up to 5 MHz Inductance range from 0.1 μh to 33 μh Current range from 5.2 A to 118 A 13.8 mm x 12.5 mm footprint surface mount package in a 5.0 mm height Iron powder core material Applications Body electronics Central body control module Vehicle access control system Headlamps, tail lamps and interior lighting Heating ventilation and air conditioning controllers (HVAC) Doors, window lift and seat control Advanced driver assistance systems Basic and smart surround, and rear and front view camera Adaptive cruise control (ACC) Automatic parking control Collision avoidance system/car black box system Infotainment and cluster electronics Audio subsystem: head unit and trunk amp Digital instrument cluster In-vehicle infotainment (IVI) and navigation Chassis and safety electronics Airbag control unit Electronic Stability Control system (ESC) Electric parking brake Electronic Power Steering (EPS) Environmental Data Storage temperature range (Component): -55 C to +125 C Operating temperature range: -55 C to +125 C (ambient plus self-temperature rise) Solder reflow temperature: J-STD-020 (latest revision) compliant Pb HALOGEN HF FREE

2 Product Specifications Part Number 6 OCL 1 (μh) ± 20% FLL 2 Min. (μh) I rms 3 (A) I sat 4 (A) DCR +20 C nominal DCR +20 C maximum K-factor 5 -R10-R R22-R R33-R R47-R R56-R R68-R R82-R R0-R R5-R R8-R R2-R R3-R R7-R R6-R R8-R R8-R R2-R R R R R Open Circuit Inductance (OCL) Test Parameters: khz, 0.25 V rms, 0.0 Adc, +25 C. 2. Full Load Inductance (FLL) Test Parameters: khz, 0.25 V rms, I +25 C. 3. I rms : DC current for an approximate temperature rise of 40 C without core loss. Derating is necessary for AC currents. PCB layout, trace thickness and width, air-flow, and proximity of other heat generating components will affect the temperature rise. It is recommended that the temperature of the part not exceed +125 C under worst case operating conditions verified in the end application. 4. I sat : Peak current for approximately 20% rolloff at +25 C. 5. K-factor: Used to determine B p-p for core loss (see graph). B p-p = K * L * I. B p-p : (Gauss), K: (K-factor from table), L: (Inductance in μh), I (Peak to peak ripple current in amps). 6. Part Number Definition: -yyy-r - = Product code and size yyy= Inductance value in μh, R = decimal point, if no R is present then third character equals number of zeros. -R suffix = RoHS compliant 2

3 Technical Data Dimensions- mm Top View Side View Bottom View Recommended Pad Layout Schematic 13.3± max. 2.54± ±0.3 AXXX wlyy R 4.0± typ typ. 4.9 Part Marking: A = Automotive grade, xxx = Inductance value in µh, R = decimal point, if no R is present, third character equals number of zeros, wlyy = (Date Code), R = (Revision Level) All soldering surfaces to be coplanar within 0.10 millimeters. Tolerances are ±0.3 millimeters unless stated otherwise. Color: Grey. Do not route traces or vias underneath the inductor Packaging information- mm Drawing not to scale Supplied in tape and reel packaging, 400 parts per 13 diameter reel AXXX wlyy R 3

4 Temperature rise vs. total loss Temperature Rise ( C) Total Loss (W) Core loss vs B p-p MHz 500KHz 300KHz 200KHz KHz Core Loss (mw) B p-p (Gauss) 4

5 Technical Data Inductance characteristics -R10-R -R22-R % of OC L % of OC L R33-R -R47-R R56-R -R68-R

6 Inductance characteristics -R82-R -1R0-R R5-R -1R8-R R2-R -3R3-R

7 Technical Data Inductance characteristics -4R7-R -5R6-R R8-R -7R8-R R2-R --R

8 Inductance characteristics -150-R -220-R R

9 Technical Data Solder reflow profile T P Max. Ramp Up Rate = 3 C/s Max. Ramp Down Rate = 6 C/s t P T C -5 C Table 1 - Standard SnPb Solder (T c ) Package Thickness mm3 <350 mm3 350 T L Temperature T smax T smin Preheat A ts t <2.5mm) 235 C 220 C 2.5mm 220 C 220 C Table 2 - Lead (Pb) Free Solder (T c ) Package Thickness mm 3 <350 mm mm 3 >2000 <1.6mm 260 C 260 C 260 C mm 260 C 250 C 245 C >2.5mm 250 C 245 C 245 C 25 C Time 25 C to Peak Time Reference JDEC J-STD-020 Profile Feature Standard SnPb Solder Lead (Pb) Free Solder Preheat and Soak Temperature min. (T smin ) C 150 C Temperature max. (T smax ) 150 C 200 C Time (T smin to T smax ) (t s ) Seconds Seconds Average ramp up rate T smax to T p 3 C/ Second Max. 3 C/ Second Max. Liquidous temperature (Tl) Time at liquidous (t L ) 183 C Seconds Peak package body temperature (T P )* Table 1 Table C Seconds Time (t p )** within 5 C of the specified classification temperature (T c ) 20 Seconds** 30 Seconds** Average ramp-down rate (T p to T smax ) 6 C/ Second Max. 6 C/ Second Max. Time 25 C to Peak Temperature 6 Minutes Max. 8 Minutes Max. * Tolerance for peak profile temperature (T p ) is defined as a supplier minimum and a user maximum. ** Tolerance for time at peak profile temperature (t p ) is defined as a supplier minimum and a user maximum. Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Eaton Electronics Division 0 Eaton Boulevard Cleveland, OH United States 2017 Eaton All Rights Reserved Publication No BU-SB14567 October 2017 Eaton is a registered trademark. All other trademarks are property of their respective owners.

HCMA1104 Automotive grade High current power inductors

HCMA1104 Automotive grade High current power inductors Automotive grade High current power inductors Supersedes October 2017 Product features AEC-Q200 qualified High current carrying capacity Magnetically shielded, low EMI Frequency range up to 5 MHz Inductance