DRQ. Dual winding, high power density, shielded drum core power inductors. Technical Data DS4311. Applications. Environmental data.
|
|
- Rebecca Morton
- 5 years ago
- Views:
Transcription
1 Supersedes pril 0 Dual winding, high power density, shielded drum core power inductors pplications Desktop and servers DVD and media players Portable and handheld devices LCD panels s a transformer: SEPIC, flyback s an inductor: buck, boost, coupled inductor DC-DC Converters VRM inductor for CPU and DDR power supplies Input and output filter chokes Product features Dual winding inductors that can be used as either a single inductor, or in coupled inductor/transformer applications (: turns ratio) Four sizes of shielded drum core inductors Windings can be connected in series or parallel, offering a broad range of inductance and current ratings current ratings from 0. to 56 RMS current ratings from 0.8 to 7.9 Inductance ratings from 0. µh to.0 mh 00 Vac Isolation between windings Ferrite core material Environmental data Storage temperature range (component): -0 C to +5 C Operating temperature range: -0 C to +5 C (ambient plus self-temperature rise) Solder reflow temperature: J-STD-00 (latest revision) compliant Pb HLOGEN HF FREE
2 Product specifications Part Number Rated Inductance Parallel Ratings Series Ratings 7-R-R R0-R R5-R R-R R-R R7-R R8-R R-R R R R R R R R R R R R R R R R Open Circuit Inductance Test Parameters: 00 khz, 0.5 V rms, 0.0 dc Parallel: (, -,) Series: (-) tie (-). RMS current for an approximate DT of 0 C without core loss. It is recommended that the temperature of the part not exceed +5 C.. current for approximately 0% roll-off at +0 C. DCR +0 C 5. pplied Volt-Time product (V-µs) across the inductor. This value represents the applied V-µs at 00 khz necessary to generate a core loss equal to 0% of the total losses for a 0 C temperature rise. 6. Turns Ratio (:):(-) : 7. Part number definition: xxx-yyy- - xxx = product code and size, - yyy = inductance value in µh, - R = decimal point. If no R is present, third character = # of zeros - -R suffix = RoHS complian
3 Product specifications Part Number Rated Inductance Parallel Ratings Typ. Series Ratings Typ. 7-R-R R0-R R5-R R-R R-R R7-R R8-R R-R R R R R R R R R R R R R R R R Open Circuit Inductance Test Parameters: 00 khz, 0.5 V rms, 0.0 dc Parallel: (, -,) Series: (-) tie (-). RMS current for an approximate DT of 0 C without core loss. It is recommended that the temperature of the part not exceed +5 C.. current for approximately 0% roll-off at +0 C. DCR +0 C 5. pplied Volt-Time product (V-µs) across the inductor. This value represents the applied V-µs at 00 khz necessary to generate a core loss equal to 0% of the total losses for a 0 C temperature rise. 6. Turns Ratio (:):(-) : 7. Part number definition: xxx-yyy- - xxx = product code and size, - yyy = inductance value in µh, - R = decimal point. If no R is present, third character = # of zeros - -R suffix = RoHS complian
4 Product specifications Part Number Rated Inductance Parallel Ratings Series Ratings 5-R7-R R0-R R5-R R-R R-R R7-R R8-R R-R R R R R R R R R R R R R R R R Open Circuit Inductance Test Parameters: 00 khz, 0.5 V rms, 0.0 dc Parallel: (, -,) Series: (-) tie (-). RMS current for an approximate DT of 0 C without core loss. It is recommended that the temperature of the part not exceed +5 C.. current for approximately 0% roll-off at +0 C. DCR +0 C 5. pplied Volt-Time product (V-µs) across the inductor. This value represents the applied V-µs at 00 khz necessary to generate a core loss equal to 0% of the total losses for a 0 C temperature rise. 6. Turns Ratio (:):(-) : 7. Part number definition: xxx-yyy- - xxx = product code and size, - yyy = inductance value in µh, - R = decimal point. If no R is present, third character = # of zeros - -R suffix = RoHS complian
5 Product specifications Part Number Rated Inductance Parallel Ratings Series Ratings 7-R7-R R0-R R5-R R-R R-R R7-R R8-R R-R R R R R R R R R R R R R R R R Open Circuit Inductance Test Parameters: 00 khz, 0.5 V rms, 0.0 dc Parallel: (, -,) Series: (-) tie (-). RMS current for an approximate DT of 0 C without core loss. It is recommended that the temperature of the part not exceed +5 C.. current for approximately 0% roll-off at 0 C. DCR +0 C 5. pplied Volt-Time product (V-µs) across the inductor. This value represents the applied V-µs at 00 khz necessary to generate a core loss equal to 0% of the total losses for a 0 C temperature rise. 6. Turns Ratio (:):(-) : 7. Part number definition: xxx-yyy- - xxx = product code and size, - yyy = inductance value in µh, - R = decimal point. If no R is present, third character = # of zeros - -R suffix = RoHS complian 5
6 Dimensions - mm 7 Top View 7 wllyy R Side View Recommended Pad Layout Dual Inductor Mode Bottom View Schematic Dual Inductor Parallel Mode L L L L L L Top View 7 wllyy R Side View Recommended Pad Layout Dual Inductor Mode Bottom View Schematic 0.7 Dual Inductor Parallel Mode L L L L L L 6. = Inductance value per family chart wllyy = Date code R = Revision level Dot indicates pin # Do not route traces or vias underneath the inductor 6
7 Dimensions - mm 5 Top View Side View Recommended Pad Layout wwllyy R Dual Inductor Mode.80 Bottom View.05 Schematic.00.5 Dual Inductor L L L L Parallel Mode L L Side View Recommended Pad Layout Top View wwllyy R Bottom View Dual Inductor Mode Schematic Dual Inductor L L L L Parallel Mode L L 0.0 = Inductance value per family chart wwllyy = (date code) R = revision level Dot indicates pin # Do not route traces or vias underneath the inductor 7
8 Packaging information- mm 7 Supplied in tape and reel packaging, 50 parts per reel, " diameter reel. o=7.90mm Bo=7.90mm Ko=.80mm CTUL SIZE 7 Direction of Feed 7 Supplied in tape and reel packaging, 00 parts per reel, " diameter reel..00 ±0..00 Ø /-0.0 Ø.50 Min..75±0.0 o=7.90mm Bo=7.90mm Ko=.70mm Ko Bo o ± ±0. Direction of Feed CTUL SIZE 7 SECTION - 5 Supplied in tape and reel packaging, 600 parts per reel, " diameter reel..5 dia +0./ dia min.7.5 o=.00mm Bo=.00mm Ko=6.0mm K0 SECTION - 7 Supplied in tape and reel packaging, 50 parts per reel, " diameter reel. B0.5 dia +0./ wwllyy dia min.7.0 +/-0. Direction of Feed CTUL SIZE 5 R0. max..5 o=.00mm Bo=.00mm Ko=8.0mm K0 SECTION - B0 7 wwllyy R0.5 TYP..0 +/-0. Direction of Feed CTUL SIZE 7 Dimensions are in millimeters. 8
9 Core loss Derating with Core Loss % of Losses from Irms (max) 00 KHz 00 KHz 00 KHz 50 KHz 5 KHz % of pplied Volt-µsecond Inductance characteristics OCL (%) OCL (%) % of Isat % of Isat 5 7 OCL (%) % of Isat OCL (%) % of Isat 9
10 Solder Reflow Profile T P T L Temperature T smax T smin. Ramp Up Rate = C/s. Ramp Down Rate = 6 C/s Preheat ts t t P T C -5 C Table - Standard SnPb Solder (T c ) Volume Volume Package mm mm Thickness <50 _>50 <.5mm 5 C 0 C _>.5mm 0 C 0 C Table - Lead (Pb) Free Solder (T c ) Volume Volume Volume Package mm mm mm Thickness < >000 <.6mm 60 C 60 C 60 C.6.5mm 60 C 50 C 5 C >.5mm 50 C 5 C 5 C 5 C Time 5 C to Time Reference JDEC J-STD-00 Profile Feature Standard SnPb Solder Lead (Pb) Free Solder Preheat and Soak Temperature min. (T smin ) 00 C 50 C Temperature max. (T smax ) 50 C 00 C Time (T smin to T smax ) (t s ) 60-0 Seconds 60-0 Seconds verage ramp up rate T smax to T p C/ Second. C/ Second. Liquidous temperature (TL) 8 C 7 C Time at liquidous (t L ) Seconds Seconds package body temperature (T P )* Table Table Time (t p )** within 5 C of the specified classification temperature (T c ) 0 Seconds** 0 Seconds** verage ramp-down rate (T p to T smax ) 6 C/ Second. 6 C/ Second. Time 5 C to Temperature 6 Minutes. 8 Minutes. * Tolerance for peak profile temperature (T p ) is defined as a supplier minimum and a user maximum. ** Tolerance for time at peak profile temperature (t p ) is defined as a supplier minimum and a user maximum. Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Compan. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant inju y to the user. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Eaton Electronics Division 000 Eaton Boulevard Cleveland, OH United States 07 Eaton ll Rights Reserved Printed in US Publication No. DS BU-SB September 07 Eaton is a registered trademark. ll other trademarks are property of their respective owners.
High power density, high efficiency, shielded drum core power inductors
Supersedes pril 4 High power density, high efficiency, shielded drum core power inductors pplications Desktop and servers DVD and media players Portable and handheld devices LCD panels DC-DC converters
More informationCoiltronics DRQ Series Dual winding, shielded inductors/transformers
Technical Data Effective pril 0 Supersedes December 007 Coiltronics DRQ Series Dual winding, pplications s a transformer: SEPIC, flyback s an inductor: buck, boost, coupled inductor DC-DC Converters VRM
More informationHigh power density, high efficiency, low profile shielded drum core power inductors
Supersedes pril 2014 High power density, high efficiency, low profile shielded drum pplications Notebook power LCD panels Desktop and servers DVD players and portable power devices DC-DC Converters Buck,
More informationFP2 Low profile, high current power inductors
Supersedes July 014 FP Low profile, high current power inductors Product description High current carrying capacity Dual conductors allow for low inductance and high current or high inductance and lower
More informationLow profile metalized shielded drum core power inductors
Technical Data PM43 Supersedes March 7 pplications Digital cameras Media players Mobile phones Hand held equipment PCMCI cards GPS systems Product features Six sizes of shielded drum core inductors with
More informationHCP0704 High current power inductors
Supersedes February 009 pplications Voltage Regulator Module (VRM) Multi-phase regulators Desktop and servers Base station equipment Notebook and laptop regulators Data networking and storage systems Point-of-load
More informationSD3118 Low profile power inductors
SD38 Low profile power inductors Supersedes November 009 pplications Mobile/smart phones Tablets/e-readers Media players Digital cameras Small LED driver and LCD displays Handheld/mobile equipment Description
More informationHCM1103 High current power inductors
Supersedes June 2012 Applications Product features 11.5 x 10.3 x 3.0 mm maximum surface mount package Iron powder core material Magnetically shielded, low EMI High current carrying capacity, low core losses
More informationHCM1707. High current power inductors. Technical Data Applications
Supersedes August Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs Data networking and storage systems Base station equipment Battery
More informationHCM1305. High current power inductors. Technical Data Applications. Environmental data. Product features
Supersedes June 2014 Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs Base station equipment Notebook and laptop regulators Battery
More informationdiscontinued October 31, 2017 or until inventory is
Supersedes June 2017 Applications Computer and portable power devices LCD panels, DVD players Inductor: DC-DC converters Buck, boost, forward, and resonant converters Noise filtering and filter chokes
More informationHCV1605 High current power inductors
Technical Data 188 High current power inductors pplications Compatible with Picor Cool-Power ZVS Buck and Buck-Boost Regulator Families Environmental data Storage temperature range (Component): -55 C to
More informationCLB1108 Multi-phase power inductors
Multi-phase power inductors Supersedes December 2013 Applications For exclusive use with Volterra or Maxim VPR-Devices Environmental Data Storage temperature range (component): -40 C to +125 C Operating
More informationHCV1707 High current power inductors
Technical Data 10712 High current power inductors Applications Compatible with Picor Cool-Power ZVS Buck and Buck-Boost Regulator Families Environmental data Storage temperature range (Component): -55
More informationDR1040 Shielded power inductors
Shielded power inductors Supersedes March 007 Applications LED/LCD backlighting High definition televisions (HDTV) Server and desktop power supplies Portable electronics Graphics cards and battery powered
More informationDR1050 Shielded power inductors
Shielded power inductors Supersedes March 2007 Applications LED/LCD backlighting High definition televisions (HDTV) Server and desktop power supplies Graphics cards and battery powered systems Point-of-load
More informationDRQ Series Dual Winding, Shielded Inductors/Transformer
Description 5 C maximum total temperature operation Dual winding inductors that can be used as either a single inductor, or in coupled inductor/transformer applications (: turns ratio) Four sizes of shielded
More informationDR1030 Shielded power inductors
Supersedes March 2007 Applications LED/LCD backlighting High definition televisions (HDTV) Server and desktop power supplies Portable electronics Notebook and laptop regulators Graphics cards and battery
More informationHCM1104 High current power inductors
Technical Data 4370 High current power inductors Supersedes September 2017 Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-Load modules Desktop and server VRMs and EVRDs Base
More informationdiscontinued October 31, 2017 or until inventory is
Technical Data DS4314 Supersedes June 2017 ECONO-PAC /OCTA-PAC OCTA-PAC PLUS Applications Computer and portable power devices LCD panels, DVD players Inductor: DC-DC converters Buck, boost, forward, and
More informationAutomotive grade Dual winding, high power density shielded drum core power inductors
Supersedes September 07 Dual winding, high power density shielded drum core power inductors Product features AEC-Q00 qualified Dual winding inductors that can be used as a single inductor, SEPIC, Flyback,
More informationFP1005R High frequency, high current power inductors
Supersedes December 2008 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) Server and desktop Central processing unit (CPU) Graphics
More informationFP1309B High frequency, high current power inductors
Technical Data 10477 High frequency, high current power inductors Applications Servers Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) Server and desktop Central processing unit (CPU)
More informationFP1008R7 High frequency, high current power inductors
Technical Data 1629 Effective December 216 FP18R7 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and high power density VRMs
More informationMPI40-V2 High current, low profile, miniature power inductors
Applications Handheld/mobile devices Portable media players Notebook/netbook/laptop regulators Tablets/smartbooks Battery operated devices LED drivers LCD displays Point-of-load (POL) converters Product
More informationCMS Common mode inductors, surface mount
Effective October 215 Supersedes March 27 Common mode inductors, surface mount pplications EMI filters DC-DC brick power supplies Discrete output supplies Discrete and point-of-use power supplies (PUPS)
More informationHCM1307 High current power inductors
Applications Multi-phase regulators Voltage Regulator Modules (VRMs) Distributed power systems - converters Desktop and server VRMs and EVRDs Point-of-Load (POL) modules Field Programmable Gate Array (FPGA)
More informationFP2207R High frequency, high current power inductors
Technical Data 10673 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and highpower density VRMs Server and desktop Central processing
More informationCL1208 Multi-phase power inductors
Technical Data 1579 Effective December 216 CL128 Multi-phase power inductors Applications For exclusive use with Maxim Multi-phase controllers Voltage Regulator Modules (VRMs) and high power density VRMs
More informationMPI25-V2 High current, low profile, miniature power inductors
Technical Data 649 Effective July 8 MPI-V High current, low profile, miniature power inductors Product features High current carrying capacity in a compact standard 8 ( metric) footprint Magnetically shielded,
More informationDRA. Automotive grade High power density, high efficiency, shielded drum core power inductors. Technical Data Applications.
Supersedes September 2017 High power density, high efficiency, shielded drum core power inductors Applications Body electronics o Headlamps, tail lamps and interior lighting o Heating Ventilation and Air
More informationDR Series High Power Density, High Efficiency, Shielded Inductors
DR Series High Power Density, High Efficiency, Shielded Inductors Description 5 C maximum total operating temperature Four sizes of shielded drum core inductors Inductance range from.33µh to µh Current
More informationHCMA1305 Automotive grade High current power inductors
Automotive grade High current power inductors Supersedes August 2014 Product features AEC-Q200 qualified High current carrying capacity Low core losses Magnetically shielded, low EMI Frequency range up
More informationHCMA1104 Automotive grade High current power inductors
Automotive grade High current power inductors Supersedes October 2017 Product features AEC-Q200 qualified High current carrying capacity Magnetically shielded, low EMI Frequency range up to 5 MHz Inductance
More informationMPIA25-V2 Automotive grade High current, low profile, miniature power inductors
Product features AEC-Q qualified High current carrying capacity in a compact standard 8 ( metric) footprint Magnetically shielded, Low EMI Rugged construction Self resonant frequency (SRF) greater than
More informationMPIA40-V2 Automotive grade High current, low profile, miniature power inductors
Technical Data 5 Effective April 7 MPIA-V Product features AEC-Q Grade qualified High current carrying capacity Magnetically shielded, Low EMI Rugged flexible construction Self resonant frequency (SRF)
More informationHCMA0703 Automotive grade High current power inductors
Automotive grade High current power inductors Supersedes August 2014 Description Automotive grade 3 qualified High current carrying capacity, low core losses Magnetically shielded, low EMI Frequency range
More informationHCM1A1305 Automotive grade High current power inductors
Technical Data Effective September HCMA Automotive grade High current power inductors Product features AEC-Q Grade qualified High current carrying capacity Magnetically shielded, low EMI Frequency range
More informationDRA Series High Power Density, High Efficiency, Shielded Inductors. Magnetics Solutions For Automotive Applications
For utomotive pplications Description 65 C maximum total temperature operation Five sizes of utomotive grade shielded drum core inductors Inductance range from.8uh to uh Current range up to 56 mps Mechanical
More informationECONO-PAC /OCTA-PAC OCTA-PAC PLUS Power Inductors and Transformers
Description Surface mount magnetics that can be used as single or coupled inductors or 1:1 transformers that provide isolation between two windings OCTA-PAC s are designed around high frequency, low loss
More informationHigh Current, High Frequency, Miniature Power Inductors
ECS-MPI4040 High Current, High Frequency, Automotive Applications: Driver assistance Information Entertainment Lighting Product description: AEC-Q200 Qualified, Grade 1 Handles high transient inrush current
More information0402ESDA-MLP ESD suppressor
ESD suppressor Supersedes September 2010 Pb HALOGEN HF FREE Applications ESD port protection for mobile/smart phones Game console ESD port protection High speed ESD data port protection Set-top-boxes Tablets,
More informationINTRODUCTION. Magnetics
M GNETICS INTRODUCTION Magnetics From overcurrent and overvoltage protection to supercapacitors and magnetics, Cooper Bussmann provides integrated solutions that meet the evolving needs of technology-driven
More informationCoiltronics. High Frequency Inductor Catalog Magnetics for Power Management
Coiltronics High Frequency Inductor Catalog Magnetics for Power Management Magnetics Products for Power Management Table of Contents Inductor Series Size (mm) Page FP0705 7 x 7 x 5 4 FP0708 7 x 8.5 x 7.
More information0402ESDA-AEC Automotive grade ESD suppressor
Technical Data 10763 Automotive grade ESD suppressor Pb HALOGEN HF FREE Product features AEC-Q200 qualifed Ultra-low capacitance (0.05 pf) ideal for high speed data applications Provides Electro Static
More informationVP VERSA-PAC Inductors and Transformers (Surface Mount)
Supersedes arch 00 Product features Six winding, surface mount devices that offer more than 00 usable inductor or transformer configurations igh power density and low profile ow radiated noise and tightly
More informationHP1, HPH1 HP2, HPH2 HP3, HPH3 HP4, HPH4 HP5, HPH5 HP6, HPH6. Winding Layout. Middle 11. Inner
Document - HP, HPH HP, HPH HP, HPH HP, HPH HP, HPH HP, HPH Six : isolated windings that can be connected in series or parallel Tightly coupled windings Power range: 0 Watts as inductor and flyback transformer;
More informationSMD Common Mode Choke SMC 37 Series. Features. Applications. Mechanical Dimensions (in mm) Land Pattern (in mm) Schematic. xxx xxx
SMC 37 Series Features Compact Size High impedance but very high rated current and low RDC RoHS compliant Operating temperature: 4 C to +125 C with (4 C rise) Irms current. Storage Temperature Range: -4
More informationSS-5H 300V Subminiature, radial leaded, time-delay fuses
Supersedes September 2014 300V Subiature, radial leaded, time-delay fuses Pb HALOGEN HF FREE Product description Radial leaded, time delay with high breaking capacity Designed to IEC60127-3 Plastic cap
More informationECUS INTERNATIONAL CO.,LTD SMD Common Mode Line Filter SLD Series Features Compact Size For different noise supression frequency ran
SMD Common Mode Line Filter SLD Series Features Compact Size For different noise supression frequency range RoHS compliant Operating temperature: 40 C to +125 C with (40 C rise) Irms current. Storage Temperature
More informationKun Shan MAZO tech Co., Ltd
Page : 1 / 1 High Current, Power Inductors MPCA-63-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 7.3x6.8x 3.mm maximum surface mount package Powder iron core material
More informationKun Shan MAZO tech Co., Ltd
Page : 1/9 High Current, Power Inductors LPCA-14-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 11.5x1.3x 4.mm maximum surface mount package Powder iron core material
More informationP-Channel Enhancement Mode MOSFET
Features -3V/-3, =46mΩ (typ.) @ V GS =-1V =55mΩ (typ.) @ V GS =-4.5V =79mΩ (typ.) @ V GS =-2.5V Super High Dense Cell Design Reliable and Rugged Enhance ESD Cell Protection Lead Free and Green Devices
More informationKun Shan MAZO tech Co., Ltd
Page : 1 / 8 High Current, Power Inductors MPCA-412-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 4.75 x 4.45 x 1.2mm maximum surface mount package Powder iron core
More informationECUS INTERNATIONAL CO.,LTD SMD Common Mode Line Filter CLF 0905 Series Features Compact Size Mn and NiZn cores for different noise s
SMD Common Mode Line Filter CLF 0905 Series Features Compact Size Mn and NiZn cores for different noise supression frequency range RoHS compliant Operating : 40 C to +125 C with (40 C rise) Irms current.
More informationSMD High Frequency Power Inductor. Designed for VRD & VRM 10.x & 11.x Applications
Designed for VRD & VRM 1.x & 11.x Applications FEATURES Recommended for use with all major Voltage Regulator ICs High Current handling capability in the smallest footprint Up to 2MHz operating frequency
More informationINPAQ. Specification. WIP201610S L Series. Product Name. Power Inductor. Global RF/Component Solutions
WIP201610S L Series Specification Product Name Series Power Inductor WIP201610S L Series Size EIAJ 2016 WIP201610S L Series Engineering Specification 1. Scope Feature High saturation current realized by
More informationSMD High Frequency Power Inductor. Designed for Utility Regulator Applications
FEATURES Recommended for use with all major Voltage Regulator ICs High Current handling capability in the smallest footprint Up to 2MHz operating frequency Extended operating temperature range: -4C to
More informationApplications TPI L 180 N. Series Size Code Inductor Inductance Code nh Core Material TPI
Overview The KEMET TPI ferrite core inductors are designed for a very low core loss and its flat wire 1 turn through the construction design enables very high efficiency at large currents. The core material
More informationSRR6038 Series - Shielded SMD Power Inductors
*RoHS COMPLIANT Features Height of. mm max. Current rating up to. A RoHS compliant* Applications Input/output of DC/DC converters Power supplies for: Portable communication equipment Camcorders LCD TVs
More informationFeatures. P-Channel Enhancement Mode MOSFET
P-Channel Enhancement Mode MOSFET Features Pin Description -20V/-3 R DS(ON) = 56mΩ (typ.) @ V GS = -4.5V R DS(ON) = 85mΩ (typ.) @ V GS = -2.5V R DS(ON) = 135mΩ (typ.) @ V GS = -1.8V Super High Dense Cell
More informationShielded Power Inductors TL1010SG Series
Form Rev- /5/ Shielded Power Inductors TLSG Series FEATURES Low DCR and excellent current handling Operating temperature range: C to +5 C with Irms current, +5 C to +5 C with derated current Storage temperature
More informationAssembly Material. Handling Code Temperature Range Package Code
Dual Enhancement Mode MOSFET (N- and P-Channel) Features Pin Description N-Channel 20V/3A, R DS(ON) =50mΩ(typ.) @ =4.5V R DS(ON) =65mΩ(typ.) @ =2.5V P-Channel -20V/-2A, R DS(ON) =90mΩ(typ.) @ =-4.5V R
More information4 PIN DIP HIGH VOLTAGE PHOTODARLINGTON PHOTOCOUPLER EL852 Series
EL852 Series Schematic Features: High collector- emitter voltage (VCEO=350V) Current transfer ratio (CTR: 1000% min. at I F =1mA, V CE =2V) High isolation voltage between input and output (Viso=5000 V
More informationRecommended Land Pattern: [mm]
Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: 1 8 detail 0,3 ±0,05 16 1,27 9 Properties Test conditions Value Unit Tol. Inductance 100 khz/ 100 mv @ 8 m L 300 µh min. Insulation
More informationFeatures. N-Channel Enhancement Mode MOSFET 30V/50A, R DS(ON) =10V
N-Channel Enhancement Mode MOSFET Features Pin Description 3V/5, R DS(ON) =7.5mΩ (typ.) @ =V R DS(ON) =12mΩ (typ.) @ =4.5V Super High Dense Cell Design Reliable and Rugged valanche Rated D G S Top View
More informationTeccor brand Thyristors High Energy Unidirectional SIDACs
K2xx0yHU Series RoHS Description The new K2xx0yHU is a higher energy SIDC switch for gas ignition applications requiring higher current pulse current especially at low repetition rate. It is offered in
More informationCOMPLIANT Common Mode Chokes - UU9.8 & UU10.5 Series
Document FR00 COMPLIANT Common Mode Chokes - UU9.8 & UU0.5 Series Order Code MCU 000 MCU 0002 Core Mounting Inductance mh (Min) UU9.8 Series Current Rating ma (steady state) 350 350 Leakage DC Inductance
More informationFeatures. General Description. Applications. Pin Configuration. Ordering and Marking Information. Hall Effect Micro Switch IC
Hall Effect Micro Switch IC Features General Description Micro Power Operation for Battery Applications Chopper Stabilized Amplifier Independent of North or South Pole Magnet, Easy for Manufacture Small
More informationFeatures. Ordering and Marking Information. Dual N-Channel Enhancement Mode MOSFET
Dual N-Channel Enhancement Mode MOSFET Features Pin Description 60V/5, R DS(ON) =38mΩ(Typ.) @ = V R DS(ON) =55mΩ(Typ.) @ = 4.5V Super High Dense Cell Design Reliable and Rugged Lead Free and Green Devices
More informationTeccor brand Thyristors 10 Amp Standard & Alternistor (High Communitation) Triacs. Qxx10xx & Qxx10xHx Series. Description
Qxx10xx & Qxx10xHx Series RoHS Description 10 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation controls,
More informationPackage Code. Handling Code. Assembly Material
P-Channel Enhancement Mode MOSFET Features Pin Description -2V/-4.6, R DS(ON) = 48mW (Max.) @ V GS =-4.5V R DS(ON) = 7mW (Max.) @ V GS =-2.5V R DS(ON) =mw (Max.) @ V GS =-.8V Reliable and Rugged Lead Free
More informationTeccor brand Thyristors High Energy Bidirectional SIDACs
Kxxx0yH Series RoHS Description The new Kxxx0yH is a higher energy SIDAC switch for gas ignition applications requiring higher current pulse current especially at low repetition rate. It is offered in
More informationApplications. Pin Configuration. Ordering and Marking Information. Hall Effect Micro Switch IC
Hall Effect Micro Switch IC Features Micro Power Operation for Battery pplications Chopper Stabilized mplifier Independent of North or South Pole Magnet, Easy for Manufacture Small Size Package Lead Free
More information6 PIN DIP RANDOM-PHASE TRIAC DRIVER PHOTOCOUPLER EL301X, EL302X, EL305X Series
6 PIN DIP RANDOM-PHASE TRIAC DRIVER PHOTOCOUPLER EL301X, EL302X, EL305X Series Schematic 1 6 2 5 Features: Peak breakdown voltage - 250V: EL301X - 400V: EL302X - 600V: EL305X High isolation voltage between
More informationKxxx0yU SIDAC Series. Thyristors Standard Unidirectional SIDACs. RoHS. Description
Standard Unidirectional SIDCs xxx0yu SIDC Series RoHS Description The SIDC is a silicon unilateral voltage triggered switch. Upon application of a voltage exceeding the SIDC breakover voltage point, the
More informationSPECIFICATION OF BSF- NR SERIES
SPECIFICATION OF BSF- NR SERIES FEATURES 1. Low profile construction and miniature size. 2. High magnetic shield construction and acted high performance for EMC/EMI protection. 3. Low coil resistance with
More information8 PIN SOP PHOTOTRANSISTOR DUAL CHANNEL PHOTOCOUPLER ELD20X Series ELD21X Series
Schematic Features: Dual channel coupler Current transfer ratios offered in narrow ranges ELD205: 40-80% ELD211: >20% ELD206: 63-125% ELD213: >100% ELD207: 100-200% ELD217: >100% High isolation voltage
More informationISOCOM. MF303x, MF304x, MF306x, MF308x COMPONENTS DESCRIPTION FEATURES ABSOLUTE MAXIMUM RATINGS APPLICATIONS ORDER INFORMATION
DESCRIPTION The MF304x, MF306x and MF308x series of devices consist of a GaAs infrared emitting diode optically coupled to a monolithic silicon detector performing the function of a zero voltage crossing
More informationSRP7050TA Series - Shielded Power Inductors
*RoHS COMPLIANT, **HALOGEN FREE & AEC-Q COMPLIANT Features n Shielded construction n Carbonyl powder core n High saturation current n Inductance range:.33 to µh n AEC-Q compliant n RoHS compliant* and
More information4 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER AC INPUT PHOTOCOUPLER EL814 Series
Schematic Features: AC input response Current transfer ratio (CTR: Min. 20% at I F =±1mA,V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Wide Operating temperature range -55~110ºC
More information4 PIN DIP RANDOM-PHASE TRIAC DRIVER PHOTOCOUPLER ELT302X, ELT305X Series
4 PIN DIP RANDOM-PHASE TRIAC DRIVER PHOTOCOUPLER ELT302X, ELT305X Series Schematic Features: Peak breakdown voltage - 400V: ELT302X - 600V: ELT305X High isolation voltage between input and output (Viso=5000
More informationDCR DCR. Irms Isat. Max. Typ. Recommended Layout 5.2 (.205) 2.2 (.087) NATURAL COOLING
*RoHS COMPLIANT & AEC APPROVED R7 Features Shielded construction Carbonyl powder core High saturation current Low profile - 1. mm Inductance range:.1 to 1 µh AEC-Q qualified RoHS compliant* and halogen
More informationPackage Code S : SOP-8. Date Code YYXXX WW
N-Channel Enhancement Mode MOSFET Features 100 V/8 A R DS(ON) = 20 m Ω (typ.) @ V GS =10V Avalanche Rated Reliable and Rugged Lead Free and Green DevicesAvailable (RoHS Compliant) Pin Description D D D
More informationAPM8005K. Pin Description. Features. Applications. Ordering and Marking Information. Dual N-Channel Enhancement Mode MOSFET 80V/4.
Dual N-Channel Enhancement Mode MOSFET Features Pin Description 80V/4.7A, R DS(ON) =45mΩ (Typ.) @ V GS = 10V R DS(ON) =55mΩ (Typ.) @ V GS = 5V Reliable and Rugged Lead Free and Green Devices Available
More informationTeccor brand Thyristors 40 Amp Low T q SCR. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 100 C 40 A I T(AV)
RoHS Description The S4040xQx series of s offer fast turn-off time (tq) characteristics required for applications such as power inverters, switching regulator, and high frequency pulse circuits. These
More informationData Sheet. HDSM-291x/293x (7.0mm) Dual digit surface mount LED display. Features. Description. Package Dimensions. Ordering Information
HDSM-91x/9x.8 (7.mm) Dual digit surface mount LED display Data Sheet Description The HDSM-91x/9x is a dual digit display of.8 (7.mm) height. This device utilizes AlInGaP / GaAs chips and has a grey surface
More informationThyristors 30 / 35 Amp Alternistor (High Commutation) Triacs
Qxx30xHx & Qxx35xHx Series RoHS Description The 30 mp / 35 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation
More informationICS High SPL Analog Microphone with Extended Low Frequency Response
High SPL Analog Microphone with Extended Low Frequency Response GENERAL DESCRIPTION The ICS-40300* is a low-noise, high SPL MEMS microphone with extended low frequency response. The ICS-40300 consists
More informationMMP PIN Diode Data Sheet Rev A
Rev A Features Low Series Resistance for Low Insertion Loss and High Isolation: R S < 1.2 Ω Low Junction Capacitance for Low Insertion Loss and High Isolation: C J < 0.1 pf Low Thermal Resistance: < 45
More informationTeccor brand Thyristors 15 Amp Standard & 16 Amp Alternistor (High Commutation) Triacs
Qxx15xx & Qxx16xHx Series RoHS Description The 15 mp and 16 mp bi-directional solid state switch series are designed for C switching and phase control applications such as motor speed, temperature modulation
More informationFLTR100V10 Filter Module 75 Vdc Input Maximum, 10 A Maximum
GE Critical Power FLTR100V10 Filter Module 75 Vdc Input Maximum, 10 A Maximum RoHS Compliant The FLTR100V10 Filter Module is designed to reduce the conducted common-mode and differential-mode noise on
More informationFeatures. Ordering and Marking Information. N-Channel Enhancement Mode MOSFET 100V/16A, R DS(ON) =10V
N-Channel Enhancement Mode MOSFET Features Pin Description 1V/16, R DS(ON) = 1mW (max.) @ V GS =1V R DS(ON) = 17mW (max.) @ V GS =4.5V ESD Protected Reliable and Rugged Lead Free and Green Devices vailable
More informationISOCOM IS127 COMPONENTS FPH1 IYWW DESCRIPTION FEATURES ABSOLUTE MAXIMUM RATINGS APPLICATIONS ORDER INFORMATION
DESCRIPTION The is an optically coupled isolator consisting of an infrared light emitting diodeand a high voltage NPN silicon photo darlington which has an integral baseemitter resistor to optimise switching
More informationFeatures. Ordering and Marking Information. N-Channel Enhancement Mode MOSFET 100V/8A, R DS(ON) = 10V. = V GS = 4.5V Reliable and Rugged
N-Channel Enhancement Mode MOSFET Features Pin Description V/8, R DS(ON) = 29mΩ(max.) @ V GS = V R DS(ON) = 33mΩ(max.) @ V GS = 4.5V Reliable and Rugged G D S Lead Free and Green Devices vailable (RoHS
More informationTeccor brand Thyristors 40 Amp High Temperature Low Tq SCR. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 115 C 40 A I T(AV)
HS4040xQx Series RoHS Description The HS4040xQx series of SCRs offer fast turn-off time (tq) characteristics required for applications such as power inverters, switching regulator, and high frequency pulse
More information4 PIN DIP LOW INPUT PHOTOTRANSISTOR PHOTOCOUPLER EL8171-G Series
Schematic Features: Current transfer ratio (CTR: 50~300% at I F =0.5mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Creepage distance >7.62 mm Operating temperature up
More informationIS31PW MHZ BOOST CONVERTER WITH 30V INTERNAL FET SWITCH February 2012 GENERAL DESCRIPTION FEATURES APPLICATIONS TYPICAL APPLICATION CIRCUIT
1.1MHZ BOOST CONVERTER WITH 30V INTERNAL FET SWITCH February 2012 GENERAL DESCRIPTION FEATURES The is a constant current step-up converter. The step-up converter topology allows series connection of the
More informationFeatures. Symbol Parameter Value Unit TO-92 SOT-223. t p TO-92 SOT-223. Peak gate current t p. = 10 μs T J
Sx02xS Series RoHS Description New mp sensitive gate SCR series offers high static dv/dt with low turn off time (tq) through small die planar construction design. ll SCR s junctions are glasspassivated
More informationFeatures. Ordering and Marking Information. N-Channel Enhancement Mode MOSFET 20V/6A, R DS(ON) =10V =30mW V GS. =25mW (max.
SM23NS N-Channel Enhancement Mode MOSFET Features Pin Description 2V/6, R DS(ON) =25mW (max.) @ =V R DS(ON) =3mW (max.) @ =4.5V R DS(ON) =4mW (max.) @ =2.5V R DS(ON) =6mW (max.) @ =.8V D G S Reliable and
More information