SD3118 Low profile power inductors
|
|
- Arabella Jordan
- 5 years ago
- Views:
Transcription
1 SD38 Low profile power inductors Supersedes November 009 pplications Mobile/smart phones Tablets/e-readers Media players Digital cameras Small LED driver and LCD displays Handheld/mobile equipment Description Low profile shielded drum core Compact footprint utilizes less board space Inductance Range from.0μh to,000μh Current range from to.94 amps 3. x 3.mm footprint surface mount package in a.8mm height Ferrite core material Halogen free, lead free, RoHS compliant Environmental Data Storage temperature range (Component): -40 C to +5 C Operating temperature range: -40 C to +5 C (ambient + self-temperature rise) Solder reflow temperature: J-STD-00D compliant Pb HLOGEN HF FREE
2 SD38 Product Specifications OCL Part Number 6 (μh) Part marking designator I rms (amps) I sat 3 (amps) DCR (Ω) +0 C K-factor 4 SD38-R0-R.04±30% SD38-R5-R.44±30% B SD38-R-R.±30% C SD38-3R3-R 3.36±30% D SD38-4R7-R 4.90±30% E SD38-6R8-R 6.7±30% F SD38-8R-R 8.±30% G SD38-0-R.4±30% H SD38-50-R 4.9±30% I SD38-0-R.5±30% J SD R 33.±30% K SD R 47.5±30% L SD38--R ±0% M SD38-33-R 330±0% N SD38-47-R 470±0% O SD38-68-R 680±0% P SD38--R 999±0% Q Open Circuit Inductance (OCL) Test Parameters: 0kHz, 0.Vrms, +5 C. I rms: DC current for an approximate temperature rise of 40 C without core loss. Derating is necessary for C currents. PCB layout, trace thickness and width, air-flow, and proximity of other heat generating components will affect the temperature rise. It is recommended that the temperature of the part not exceed 5 C under worst case operating conditions verified in the end application. 3. I sat: Peak current for approximately 30% +0 C 4. K-factor: Used to determine B p-p for core loss (see graph). Bp-p = K * L * ΔI. B p-p: (mtesla), K: (K-factor from table), L: (Inductance in μh), ΔI (Peak to peak ripple current in mps). 5. Part Number Definition: SD38-xxx-R SD38 = Product code and size xxx= Inductance value in uh, R= decimal point, if no R is present then last character equals number of zeros -R suffix = RoHS compliant Dimensions (mm) Pin # indicator.8 max 3.9 max.5 typ Recommended Pad Layout.40 Schematic max 3. max 0.8 Part marking: dot for pin indicator (orientation purposes only) xxx = 3 digit marking (first digit indicates inductance value per letter in Part marking designator, second digit is bi-weekly date code, third digit is last digit of year produced) ll soldering surfaces to be coplanar within 0. millimeters PCB tolerances are ±0. millimeters unless stated otherwise Do not route traces or vias underneath the inductor
3 SD38 Technical Data 4084 Packaging information (mm) Supplied in tape and reel packaging, 4,0 parts per 3 diameter reel Dia. +0./-0.0. Dia. min..75 o = 4.0mm = 0.93mm Bo = 4.0mm B =.5mm Ko =.00mm Ko Bo B ±0.3 SECTION - o 8.0 Direction of feed Temperature rise vs. total loss Temperature Rise ( C) Total Loss(W) 3
4 SD38 Core loss vs. Bp-p Core Loss (W) MHz 500kHz 300kHz 00kHz 0kHz 50kHz B p-p (mt) 0 00 Inductance characteristics % % 0% 90% OCL vs. l sat % of L initial 80% 70% 60% 50% 40% 30% 0% -40 C 85 C 5 C % 0% 0% % 0% 30% 40% 50% 60% 70% 80% 90% 0% % % 30% 40% % of l sat 4
5 SD38 Technical Data 4084 Solder reflow profile T P Max. Ramp Up Rate = 3 C/s Max. Ramp Down Rate = 6 C/s t P T C -5 C Table - Standard SnPb Solder (T c ) Package Thickness mm3 <350 mm3 350 T L Temperature T smax T smin Preheat ts t <.5mm) 35 C 0 C.5mm 0 C 0 C Table - Lead (Pb) Free Solder (T c ) Package Thickness < >000 <.6mm 60 C 60 C 60 C.6.5mm 60 C 50 C 45 C >.5mm 50 C 45 C 45 C 5 C Time 5 C to Peak Time Reference JDEC J-STD-00D Profile Feature Standard SnPb Solder Lead (Pb) Free Solder Preheat and Soak Temperature min. (T smin ) 0 C 50 C Temperature max. (T smax ) 50 C 00 C Time (T smin to T smax ) (t s ) 60- Seconds 60- Seconds verage ramp up rate T smax to T p 3 C/ Second Max. 3 C/ Second Max. Liquidous temperature (Tl) Time at liquidous (t L ) 83 C Seconds Peak package body temperature (T P )* Table Table 7 C Seconds Time (t p )** within 5 C of the specified classification temperature (T c ) 0 Seconds** 30 Seconds** verage ramp-down rate (T p to T smax ) 6 C/ Second Max. 6 C/ Second Max. Time 5 C to Peak Temperature 6 Minutes Max. 8 Minutes Max. * Tolerance for peak profile temperature (T p ) is defined as a supplier minimum and a user maximum. ** Tolerance for time at peak profile temperature (t p ) is defined as a supplier minimum and a user maximum. Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Eaton Electronics Division 00 Eaton Boulevard Cleveland, OH 44 United States 05 Eaton ll Rights Reserved Printed in US Publication No BU-MC508 September 05 Eaton is a registered trademark. ll other trademarks are property of their respective owners.
MPI40-V2 High current, low profile, miniature power inductors
Applications Handheld/mobile devices Portable media players Notebook/netbook/laptop regulators Tablets/smartbooks Battery operated devices LED drivers LCD displays Point-of-load (POL) converters Product
More informationMPI25-V2 High current, low profile, miniature power inductors
Technical Data 649 Effective July 8 MPI-V High current, low profile, miniature power inductors Product features High current carrying capacity in a compact standard 8 ( metric) footprint Magnetically shielded,
More informationHigh power density, high efficiency, low profile shielded drum core power inductors
Supersedes pril 2014 High power density, high efficiency, low profile shielded drum pplications Notebook power LCD panels Desktop and servers DVD players and portable power devices DC-DC Converters Buck,
More informationDR1040 Shielded power inductors
Shielded power inductors Supersedes March 007 Applications LED/LCD backlighting High definition televisions (HDTV) Server and desktop power supplies Portable electronics Graphics cards and battery powered
More informationDR1050 Shielded power inductors
Shielded power inductors Supersedes March 2007 Applications LED/LCD backlighting High definition televisions (HDTV) Server and desktop power supplies Graphics cards and battery powered systems Point-of-load
More informationDR1030 Shielded power inductors
Supersedes March 2007 Applications LED/LCD backlighting High definition televisions (HDTV) Server and desktop power supplies Portable electronics Notebook and laptop regulators Graphics cards and battery
More informationHCM1104 High current power inductors
Technical Data 4370 High current power inductors Supersedes September 2017 Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-Load modules Desktop and server VRMs and EVRDs Base
More informationHCP0704 High current power inductors
Supersedes February 009 pplications Voltage Regulator Module (VRM) Multi-phase regulators Desktop and servers Base station equipment Notebook and laptop regulators Data networking and storage systems Point-of-load
More informationHCM1307 High current power inductors
Applications Multi-phase regulators Voltage Regulator Modules (VRMs) Distributed power systems - converters Desktop and server VRMs and EVRDs Point-of-Load (POL) modules Field Programmable Gate Array (FPGA)
More informationHCM1707. High current power inductors. Technical Data Applications
Supersedes August Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs Data networking and storage systems Base station equipment Battery
More informationHCM1305. High current power inductors. Technical Data Applications. Environmental data. Product features
Supersedes June 2014 Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs Base station equipment Notebook and laptop regulators Battery
More informationFP1309B High frequency, high current power inductors
Technical Data 10477 High frequency, high current power inductors Applications Servers Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) Server and desktop Central processing unit (CPU)
More informationFP2 Low profile, high current power inductors
Supersedes July 014 FP Low profile, high current power inductors Product description High current carrying capacity Dual conductors allow for low inductance and high current or high inductance and lower
More informationHCM1103 High current power inductors
Supersedes June 2012 Applications Product features 11.5 x 10.3 x 3.0 mm maximum surface mount package Iron powder core material Magnetically shielded, low EMI High current carrying capacity, low core losses
More informationHCV1605 High current power inductors
Technical Data 188 High current power inductors pplications Compatible with Picor Cool-Power ZVS Buck and Buck-Boost Regulator Families Environmental data Storage temperature range (Component): -55 C to
More informationHCV1707 High current power inductors
Technical Data 10712 High current power inductors Applications Compatible with Picor Cool-Power ZVS Buck and Buck-Boost Regulator Families Environmental data Storage temperature range (Component): -55
More informationFP1008R7 High frequency, high current power inductors
Technical Data 1629 Effective December 216 FP18R7 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and high power density VRMs
More informationFP1005R High frequency, high current power inductors
Supersedes December 2008 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) Server and desktop Central processing unit (CPU) Graphics
More informationFP2207R High frequency, high current power inductors
Technical Data 10673 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and highpower density VRMs Server and desktop Central processing
More informationMPIA25-V2 Automotive grade High current, low profile, miniature power inductors
Product features AEC-Q qualified High current carrying capacity in a compact standard 8 ( metric) footprint Magnetically shielded, Low EMI Rugged construction Self resonant frequency (SRF) greater than
More informationMPIA40-V2 Automotive grade High current, low profile, miniature power inductors
Technical Data 5 Effective April 7 MPIA-V Product features AEC-Q Grade qualified High current carrying capacity Magnetically shielded, Low EMI Rugged flexible construction Self resonant frequency (SRF)
More informationHCMA1104 Automotive grade High current power inductors
Automotive grade High current power inductors Supersedes October 2017 Product features AEC-Q200 qualified High current carrying capacity Magnetically shielded, low EMI Frequency range up to 5 MHz Inductance
More informationLow profile metalized shielded drum core power inductors
Technical Data PM43 Supersedes March 7 pplications Digital cameras Media players Mobile phones Hand held equipment PCMCI cards GPS systems Product features Six sizes of shielded drum core inductors with
More informationHCM1A1305 Automotive grade High current power inductors
Technical Data Effective September HCMA Automotive grade High current power inductors Product features AEC-Q Grade qualified High current carrying capacity Magnetically shielded, low EMI Frequency range
More informationDRQ. Dual winding, high power density, shielded drum core power inductors. Technical Data DS4311. Applications. Environmental data.
Supersedes pril 0 Dual winding, high power density, shielded drum core power inductors pplications Desktop and servers DVD and media players Portable and handheld devices LCD panels s a transformer: SEPIC,
More informationHCMA1305 Automotive grade High current power inductors
Automotive grade High current power inductors Supersedes August 2014 Product features AEC-Q200 qualified High current carrying capacity Low core losses Magnetically shielded, low EMI Frequency range up
More informationAutomotive grade Dual winding, high power density shielded drum core power inductors
Supersedes September 07 Dual winding, high power density shielded drum core power inductors Product features AEC-Q00 qualified Dual winding inductors that can be used as a single inductor, SEPIC, Flyback,
More informationHCMA0703 Automotive grade High current power inductors
Automotive grade High current power inductors Supersedes August 2014 Description Automotive grade 3 qualified High current carrying capacity, low core losses Magnetically shielded, low EMI Frequency range
More informationHigh power density, high efficiency, shielded drum core power inductors
Supersedes pril 4 High power density, high efficiency, shielded drum core power inductors pplications Desktop and servers DVD and media players Portable and handheld devices LCD panels DC-DC converters
More informationCLB1108 Multi-phase power inductors
Multi-phase power inductors Supersedes December 2013 Applications For exclusive use with Volterra or Maxim VPR-Devices Environmental Data Storage temperature range (component): -40 C to +125 C Operating
More informationCL1208 Multi-phase power inductors
Technical Data 1579 Effective December 216 CL128 Multi-phase power inductors Applications For exclusive use with Maxim Multi-phase controllers Voltage Regulator Modules (VRMs) and high power density VRMs
More informationDRA. Automotive grade High power density, high efficiency, shielded drum core power inductors. Technical Data Applications.
Supersedes September 2017 High power density, high efficiency, shielded drum core power inductors Applications Body electronics o Headlamps, tail lamps and interior lighting o Heating Ventilation and Air
More informationHigh Current, High Frequency, Miniature Power Inductors
ECS-MPI4040 High Current, High Frequency, Automotive Applications: Driver assistance Information Entertainment Lighting Product description: AEC-Q200 Qualified, Grade 1 Handles high transient inrush current
More informationCMS Common mode inductors, surface mount
Effective October 215 Supersedes March 27 Common mode inductors, surface mount pplications EMI filters DC-DC brick power supplies Discrete output supplies Discrete and point-of-use power supplies (PUPS)
More informationCoiltronics DRQ Series Dual winding, shielded inductors/transformers
Technical Data Effective pril 0 Supersedes December 007 Coiltronics DRQ Series Dual winding, pplications s a transformer: SEPIC, flyback s an inductor: buck, boost, coupled inductor DC-DC Converters VRM
More informationdiscontinued October 31, 2017 or until inventory is
Supersedes June 2017 Applications Computer and portable power devices LCD panels, DVD players Inductor: DC-DC converters Buck, boost, forward, and resonant converters Noise filtering and filter chokes
More informationdiscontinued October 31, 2017 or until inventory is
Technical Data DS4314 Supersedes June 2017 ECONO-PAC /OCTA-PAC OCTA-PAC PLUS Applications Computer and portable power devices LCD panels, DVD players Inductor: DC-DC converters Buck, boost, forward, and
More information0402ESDA-MLP ESD suppressor
ESD suppressor Supersedes September 2010 Pb HALOGEN HF FREE Applications ESD port protection for mobile/smart phones Game console ESD port protection High speed ESD data port protection Set-top-boxes Tablets,
More informationDRA Series High Power Density, High Efficiency, Shielded Inductors. Magnetics Solutions For Automotive Applications
For utomotive pplications Description 65 C maximum total temperature operation Five sizes of utomotive grade shielded drum core inductors Inductance range from.8uh to uh Current range up to 56 mps Mechanical
More information0402ESDA-AEC Automotive grade ESD suppressor
Technical Data 10763 Automotive grade ESD suppressor Pb HALOGEN HF FREE Product features AEC-Q200 qualifed Ultra-low capacitance (0.05 pf) ideal for high speed data applications Provides Electro Static
More informationCoiltronics. High Frequency Inductor Catalog Magnetics for Power Management
Coiltronics High Frequency Inductor Catalog Magnetics for Power Management Magnetics Products for Power Management Table of Contents Inductor Series Size (mm) Page FP0705 7 x 7 x 5 4 FP0708 7 x 8.5 x 7.
More informationDR Series High Power Density, High Efficiency, Shielded Inductors
DR Series High Power Density, High Efficiency, Shielded Inductors Description 5 C maximum total operating temperature Four sizes of shielded drum core inductors Inductance range from.33µh to µh Current
More informationDRQ Series Dual Winding, Shielded Inductors/Transformer
Description 5 C maximum total temperature operation Dual winding inductors that can be used as either a single inductor, or in coupled inductor/transformer applications (: turns ratio) Four sizes of shielded
More informationECONO-PAC /OCTA-PAC OCTA-PAC PLUS Power Inductors and Transformers
Description Surface mount magnetics that can be used as single or coupled inductors or 1:1 transformers that provide isolation between two windings OCTA-PAC s are designed around high frequency, low loss
More informationSS-5H 300V Subminiature, radial leaded, time-delay fuses
Supersedes September 2014 300V Subiature, radial leaded, time-delay fuses Pb HALOGEN HF FREE Product description Radial leaded, time delay with high breaking capacity Designed to IEC60127-3 Plastic cap
More informationSMD Common Mode Choke SMC 37 Series. Features. Applications. Mechanical Dimensions (in mm) Land Pattern (in mm) Schematic. xxx xxx
SMC 37 Series Features Compact Size High impedance but very high rated current and low RDC RoHS compliant Operating temperature: 4 C to +125 C with (4 C rise) Irms current. Storage Temperature Range: -4
More informationKun Shan MAZO tech Co., Ltd
Page : 1 / 1 High Current, Power Inductors MPCA-63-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 7.3x6.8x 3.mm maximum surface mount package Powder iron core material
More informationKun Shan MAZO tech Co., Ltd
Page : 1 / 8 High Current, Power Inductors MPCA-412-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 4.75 x 4.45 x 1.2mm maximum surface mount package Powder iron core
More informationINTRODUCTION. Magnetics
M GNETICS INTRODUCTION Magnetics From overcurrent and overvoltage protection to supercapacitors and magnetics, Cooper Bussmann provides integrated solutions that meet the evolving needs of technology-driven
More informationKun Shan MAZO tech Co., Ltd
Page : 1/9 High Current, Power Inductors LPCA-14-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 11.5x1.3x 4.mm maximum surface mount package Powder iron core material
More informationVP VERSA-PAC Inductors and Transformers (Surface Mount)
Supersedes arch 00 Product features Six winding, surface mount devices that offer more than 00 usable inductor or transformer configurations igh power density and low profile ow radiated noise and tightly
More informationLow Profile High Current Shielded Inductor TL2020SG11 (5.49x5.18x3.0mm)
ow Profile High Current Shielded Inductor TSG (.9x.x3.mm) FEATURES: APPICATIONS: owest height (3.mm) in this package footprint PDA/notebook/desktop/server applications Operating temperature range - C to
More informationECUS INTERNATIONAL CO.,LTD SMD Common Mode Line Filter SLD Series Features Compact Size For different noise supression frequency ran
SMD Common Mode Line Filter SLD Series Features Compact Size For different noise supression frequency range RoHS compliant Operating temperature: 40 C to +125 C with (40 C rise) Irms current. Storage Temperature
More informationP-Channel Enhancement Mode MOSFET
Features -3V/-3, =46mΩ (typ.) @ V GS =-1V =55mΩ (typ.) @ V GS =-4.5V =79mΩ (typ.) @ V GS =-2.5V Super High Dense Cell Design Reliable and Rugged Enhance ESD Cell Protection Lead Free and Green Devices
More informationPLED Unidirectional Series (PLEDxUx)
(PLEDxUx) PLED Open LED Protectors Agency Approvals Agency Agency File Number E133083 Description The (PLEDxUx Series) open LED protectors provide an electronic switching shunt path around a single LED
More informationECUS INTERNATIONAL CO.,LTD SMD Common Mode Line Filter CLF 0905 Series Features Compact Size Mn and NiZn cores for different noise s
SMD Common Mode Line Filter CLF 0905 Series Features Compact Size Mn and NiZn cores for different noise supression frequency range RoHS compliant Operating : 40 C to +125 C with (40 C rise) Irms current.
More informationRecommended Land Pattern: [mm]
Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: 1 8 detail 0,3 ±0,05 16 1,27 9 Properties Test conditions Value Unit Tol. Inductance 100 khz/ 100 mv @ 8 m L 300 µh min. Insulation
More informationPLEDxUSW Series, Unidirectional, White DO-214AA
PLEDxUSW Unidirectional Series PLEDxUSW Series, Unidirectional, White DO-214AA RoHS Description Agency Approvals Agency Agency File Number E133083 The PLEDxUSW open LED protectors provide an electronic
More informationSRR6038 Series - Shielded SMD Power Inductors
*RoHS COMPLIANT Features Height of. mm max. Current rating up to. A RoHS compliant* Applications Input/output of DC/DC converters Power supplies for: Portable communication equipment Camcorders LCD TVs
More informationPLEDxUSWxA Series - Unidirectional, White Body
PLEDxUSWxA Series - Unidirectional, White Body RoHS e3 Description Agency Approvals Agency Agency File Number E133083 PLEDxUSWxA open LED protectors provide a switching electronic shunt path when an LED
More informationSMD High Frequency Power Inductor. Designed for Utility Regulator Applications
FEATURES Recommended for use with all major Voltage Regulator ICs High Current handling capability in the smallest footprint Up to 2MHz operating frequency Extended operating temperature range: -4C to
More informationSinglFuse SF-1206HHxxM Series Features
*RoHS COMPLIANT & **HALOGEN FREE X SinglFuse SF-1206HHxxM Series Features n Single blow fuse for overcurrent protection n 3216 (EIA 1206) footprint n High current rating applications n High inrush withstand
More informationRecommended Land Pattern: [mm]
Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: Properties Test conditions Value Unit Tol. Inductance 100 khz/ 100 mv L 1250 µh ±10% 6 7 1,7 Turns Ratio n 136 : 13 : 13 : 15 ±3%
More informationRecommended Land Pattern: [mm]
Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: Properties Test conditions Value Unit Tol. 5,5 Inductance 100 khz/ 10mA L 0.18 µh ±20 Rated Current ΔT = 40 K I R 20 A max. 1,3 ±0,1
More informationINPAQ. Specification. WIP201610S L Series. Product Name. Power Inductor. Global RF/Component Solutions
WIP201610S L Series Specification Product Name Series Power Inductor WIP201610S L Series Size EIAJ 2016 WIP201610S L Series Engineering Specification 1. Scope Feature High saturation current realized by
More informationMSW2T /MSW2T /MSW2T SP2T Surface Mount High Power PIN Diode Switch
PRELIMINARY MSW2T-2060-195/MSW2T-2061-195/MSW2T-2062-195 SP2T Surface Mount High Power PIN Diode Switch Features: Surface Mount SP2T Switch 5mm x 8mm x 2.5mm Industry Leading Average Power Handling 100W
More informationPLEDxN Series. PLED Open LED Protectors PLEDxN Series. RoHS. Description
RoHS Description The open LED protector provides a switching electronic shunt path when a single LED in an LED string fails as an open circuit. This ensures the entire LED string will continue to function
More informationFeatures. Samples. Symbol Parameter Value Unit TO-92 SOT-223. t p TO-92 SOT-223. = 2 x I GT. Peak gate current t p. = 10 μs T J
L01 Series RoHS Description New 1 Amp bi-directional solid state switch series offering direct interface to microprocessor drivers in economical TO-92 and surface mount packages. The die voltage blocking
More informationShielded Power Inductors TL1010SG Series
Form Rev- /5/ Shielded Power Inductors TLSG Series FEATURES Low DCR and excellent current handling Operating temperature range: C to +5 C with Irms current, +5 C to +5 C with derated current Storage temperature
More informationTeccor brand Thyristors High Energy Unidirectional SIDACs
K2xx0yHU Series RoHS Description The new K2xx0yHU is a higher energy SIDC switch for gas ignition applications requiring higher current pulse current especially at low repetition rate. It is offered in
More informationFeatures. P-Channel Enhancement Mode MOSFET
P-Channel Enhancement Mode MOSFET Features Pin Description -20V/-3 R DS(ON) = 56mΩ (typ.) @ V GS = -4.5V R DS(ON) = 85mΩ (typ.) @ V GS = -2.5V R DS(ON) = 135mΩ (typ.) @ V GS = -1.8V Super High Dense Cell
More informationTeccor brand Thyristors EV Series 0.8 Amp Sensitive Triacs
LX8 Series RoHS Description New 0.8 Amp bi-directional solid state switch series offering direct interface to microprocessor drivers in economical TO-92 and surface mount packages. The die voltage blocking
More informationHigh. FXL1350-XXX-M Power Choke R 0 1 / 9. Page : Applications. material. Powder iron core. Frequency range. up to 5MHz RoHS compliant.
1 / 9 High Current, Power Inductors FXL135-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 13.8x19x 5.mmm maximum surface mount package Powder iron core material Magnetically
More informationSRP7050TA Series - Shielded Power Inductors
*RoHS COMPLIANT, **HALOGEN FREE & AEC-Q COMPLIANT Features n Shielded construction n Carbonyl powder core n High saturation current n Inductance range:.33 to µh n AEC-Q compliant n RoHS compliant* and
More informationFeatures. N-Channel Enhancement Mode MOSFET 30V/50A, R DS(ON) =10V
N-Channel Enhancement Mode MOSFET Features Pin Description 3V/5, R DS(ON) =7.5mΩ (typ.) @ =V R DS(ON) =12mΩ (typ.) @ =4.5V Super High Dense Cell Design Reliable and Rugged valanche Rated D G S Top View
More informationSIDACtor Protection Thyristors Broadband Optimized TM Protection. Q2L Series - 3x3 QFN. Description
Q2L Series - 3x3 QN RoHS Pb e3 Description Q2L Series 3x3 QN are low capacitance SIDACtor thyristors designed to protect high density broadband equipment from damaging overvoltage transients. The series
More informationMMP PIN Diode Data Sheet Rev A
Rev A Features Low Series Resistance for Low Insertion Loss and High Isolation: R S < 1.2 Ω Low Junction Capacitance for Low Insertion Loss and High Isolation: C J < 0.1 pf Low Thermal Resistance: < 45
More informationSMD High Frequency Power Inductor. Designed for VRD & VRM 10.x & 11.x Applications
Designed for VRD & VRM 1.x & 11.x Applications FEATURES Recommended for use with all major Voltage Regulator ICs High Current handling capability in the smallest footprint Up to 2MHz operating frequency
More informationSIDACtor Protection Thyristors Broadband Optimized TM Protection. SEP Biased Series - 5x6 QFN. Description
Phillip Havens Oct 2008 SIDCtor Protection Thyristors SEP Biased Series - 5x6 QN RoHS Pb e3 Description gency pprovals gency Pinout Designation Line in Ground Line in Schematic Symbol Line In (1 -Bias
More informationFeatures. Ordering and Marking Information. Dual N-Channel Enhancement Mode MOSFET
Dual N-Channel Enhancement Mode MOSFET Features Pin Description 60V/5, R DS(ON) =38mΩ(Typ.) @ = V R DS(ON) =55mΩ(Typ.) @ = 4.5V Super High Dense Cell Design Reliable and Rugged Lead Free and Green Devices
More informationTeccor brand Thyristors High Energy Bidirectional SIDACs
Kxxx0yH Series RoHS Description The new Kxxx0yH is a higher energy SIDAC switch for gas ignition applications requiring higher current pulse current especially at low repetition rate. It is offered in
More informationMSW2T /MSW2T /MSW2T SP2T Surface Mount High Power PIN Diode Switch
PRELIMINARY MSW2T-2030-192/MSW2T-2031-192/MSW2T-2032-192 SP2T Surface Mount High Power PIN Diode Switch Features: Wide Operating Frequency Band: 50 MHz to 6 GHz Surface Mount SP2T Switch 5mm x 8mm x 2.5mm
More informationGeneral Description. Pin Configuration. Applications. Three-Terminal Low Current Positive Voltage Regulator
Three-Terminal Low Current Positive Voltage Regulator Features Three-Terminal Regulators Maximum Input Voltage : 30V Output Voltages of 5V, 12V Output Current Up to 100m No External Components Internal
More informationFLTR100V10 Filter Module 75 Vdc Input Maximum, 10 A Maximum
GE Critical Power FLTR100V10 Filter Module 75 Vdc Input Maximum, 10 A Maximum RoHS Compliant The FLTR100V10 Filter Module is designed to reduce the conducted common-mode and differential-mode noise on
More informationFeatures. Symbol Parameter Value Unit TO-92 SOT-223. t p TO-92 SOT-223. Peak gate current t p. = 10 μs T J
Sx02xS Series RoHS Description New mp sensitive gate SCR series offers high static dv/dt with low turn off time (tq) through small die planar construction design. ll SCR s junctions are glasspassivated
More informationAssembly Material. Handling Code Temperature Range Package Code
Dual Enhancement Mode MOSFET (N- and P-Channel) Features Pin Description N-Channel 20V/3A, R DS(ON) =50mΩ(typ.) @ =4.5V R DS(ON) =65mΩ(typ.) @ =2.5V P-Channel -20V/-2A, R DS(ON) =90mΩ(typ.) @ =-4.5V R
More informationRecommended Land Pattern: [mm]
Dimensions: [mm] 0,5 ±0,3 2,0 ±0,2 Recommended Land Pattern: [mm] W 1,2 WIDE BAND / HIGH SPEED: W = 3,0 HIGH CURRENT: W = 4,0 1,0 Electrical Properties: Properties Test conditions Value Unit Tol. Impedance
More informationFeatures. Red Green Yellow Orange Description
HDSM-431x/433x 0.39 (10.0mm) Single digit surface mount LED display Data Sheet Description This is 0.39 (10.0mm) height single digit display. This device utilizes AlInGaP / GaAs chips.this device is with
More informationSIDACtor Protection Thyristors Broadband Optimized TM Protection. SEP Biased Series - 5x6 QFN. Description
Phillip Havens Oct 2008 SIDCtor Protection Thyristors SEP Biased Series - 5x6 QN RoHS Pb e3 Description gency pprovals gency gency ile Number The new SEP (SIDCtor Thyristor Ethernet/PoE Protector series
More informationPackage Code S : SOP-8. Date Code YYXXX WW
N-Channel Enhancement Mode MOSFET Features 100 V/8 A R DS(ON) = 20 m Ω (typ.) @ V GS =10V Avalanche Rated Reliable and Rugged Lead Free and Green DevicesAvailable (RoHS Compliant) Pin Description D D D
More informationMSW2T /MSW2T /MSW2T SP2T Surface Mount High Power PIN Diode Switch
RELEASED MSW2T-2060-195/MSW2T-2061-195/MSW2T-2062-195 SP2T Surface Mount High Power PIN Diode Switch Features: Surface Mount SP2T Switch: 5mm x 8mm x 2.5mm Industry Leading Average Power Handling: 100W
More informationRecommended Land Pattern: [mm]
Dimensions: [mm] 0,3 ±0,2 Recommended Land Pattern: [mm] W 0,7 0,7 Electrical Properties: Properties Test conditions Value Unit Tol. Impedance @ 100 MHz Z 100 MHz 470 Ω ±25% Impedance @ 1 GHz Z 1 GHz 600
More informationDescription. Features & Benefits. RoHS compliant Glass passivated junctions. Applications. Additional Information. Datasheet
Sx01E & SxN1 Series RoHS Description Excellent for lower current heat, lamp, and audible alarm controls for home goods. Standard phase control SCRs are triggered with few milliamperes of current at less
More informationTeccor brand Thyristors 40 Amp Low T q SCR. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 100 C 40 A I T(AV)
RoHS Description The S4040xQx series of s offer fast turn-off time (tq) characteristics required for applications such as power inverters, switching regulator, and high frequency pulse circuits. These
More informationDK208D Rectifier Diode
DK208D Rectifier Diode RoHS Description This DK208D 8, 1200V rated standard recovery rectifier diode in a compact TO-252 surface mount package is ideal as a bypass diode or anti-parallel diode for active
More information4 PIN DIP HIGH VOLTAGE PHOTODARLINGTON PHOTOCOUPLER EL852 Series
EL852 Series Schematic Features: High collector- emitter voltage (VCEO=350V) Current transfer ratio (CTR: 1000% min. at I F =1mA, V CE =2V) High isolation voltage between input and output (Viso=5000 V
More information7PIN DIP PHOTO POWER TRIAC PHOTOCOUPLER ELRX223 Series
Features Low trigger current T 10mA Peak off state voltage 600V Load current 0.3,0.6,0.9,1.2A Wide operating temperature range of -40 C to 85 C High isolation voltage between input and output (Viso=5000
More informationFeatures. Symbol Parameters Test Conditions Min Max Unit V T. TA=25 C Pulse Wave = 10μs, Sine Wave, f=120hz K2201GL 230 V BO K2401GL K2401GL
Standard Bidirectional SIDACs Kxxx1GL Series RoHS Description Schematic Symbol The Multipulse SIDAC is a voltage switch used in Metal- Halide lamp ignition circuits, as well as High Pressure Sodium lamp
More informationTeccor brand Thyristors 10 Amp Standard & Alternistor (High Communitation) Triacs. Qxx10xx & Qxx10xHx Series. Description
Qxx10xx & Qxx10xHx Series RoHS Description 10 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation controls,
More information4 PIN DIP LOW INPUT PHOTOTRANSISTOR PHOTOCOUPLER EL8171-G Series
Schematic Features: Current transfer ratio (CTR: 50~300% at I F =0.5mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Creepage distance >7.62 mm Operating temperature up
More information