SRR6038 Series - Shielded SMD Power Inductors
|
|
|
- Marcia Hill
- 5 years ago
- Views:
Transcription
1 *RoHS COMPLIANT Features Height of. mm max. Current rating up to. A RoHS compliant* Applications Input/output of DC/DC converters Power supplies for: Portable communication equipment Camcorders LCD TVs SRR Series - Shielded SMD Power Inductors Electrical Characteristics Bourns Part Number Inductance khz Q Ref. Test Frequency (MHz) SRF Typ. (MHz) DCR Max. (mω) I rms (A) (μh) Tol. % SRR-RY. ± SRR-RY. ± SRR-RY. ± SRR-7RY 7. ± SRR-RY. ± SRR-R7Y.7 ± SRR-Y ± SRR-Y ± SRR-Y ± SRR-Y ± SRR-Y ± SRR-7Y 7 ± SRR-Y ±..... SRR-9Y 9 ±..... SRR-7Y 7 ± SRR-Y ± SRR-Y ± SRR-Y ± SRR-Y ± I sat (A) General Specifications Test Voltage.... V Reflow Soldering... C, sec. max. Operating Temp....- C to + C (Temperature rise included) Storage Temperature.. - C to + C Resistance to Soldering Heat... C for sec. Moisture Sensitivity Level... ESD Classification (HBM)...N/A Materials Core... Ferrite Wire... Enameled copper Adhesive...Epoxy resin Terminal... Ag/Ni/Sn Rated Current... Ind. drop % typ. at Isat Temperature Rise... C typ. at rated Irms Packaging... pcs. per reel Product Dimensions. ±. (. ±.) Soldering Profile 7. ±. (. ±.) <> Maximum of seconds between + C and + C <> C C peak C Temperature ( C) 7 C - seconds 9 C - 9 seconds Ramp Down C/second maximum. ±. (. ±.). (.9) seconds minimum 7 Ramp Up C/second maximum Electrical Schematic Time (seconds) Rev. //. (.7). (.9) Recommended Layout 7. (.7). (.) LCR METER WARNING Cancer and Reproductive Harm - * RoHS Directive /9/EC Jan. 7, including annex and RoHS Recast //EU June,. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at R (.) DIMENSIONS: MM (INCHES). (.). (.)
2 SRR Series - Shielded SMD Power Inductors Inductance vs. Current SRR-RY SRR-RY SRR-RY 7 SRR-7RY SRR-R7Y... SRR-Y... SRR-Y... SRR-Y... SRR-Y 9.. SRR-Y.. SRR-7Y.. SRR-Y..
3 SRR Series - Shielded SMD Power Inductors Inductance vs. Current SRR-9Y SRR-Y SRR-7Y.. SRR-Y.... SRR-Y.... SRR-Y....
4 SRR - mm Series SMD - Shielded Trimming SMD Potentiometer Power Inductors. (.99) DIA.. ±. (.79 ±.). (.). ±. (.7 ±.) DIA.. ±. (. ±.). - (.99 - ). ±. (. ±.) DIA.. + (.79 + ) END. (.7). (.7) START NO COMPONENT (7.7) COMPONENTS NO COMPONENT (.7) USER DIRECTION OF FEED QTY: PCS. PER REEL DIMENSIONS: MM (INCHES) REV. /
5 Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns products manufactured by or on behalf of Bourns, Inc. and Unless otherwise expressly indicated in writing, Bourns products and data sheets relating thereto are subject to change and complete before placing orders for Bourns products. The characteristics and parameters of a Bourns product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns product with other components the actual performance of the Bourns product as meeting the requirements of a particular industry of Bourns products are responsible for ensuring compliance with safety-related requirements and standards applicable to Bourns on a case-by-case basis, use of any Bourns Bourns standard products that are suitable for use in aircraft standard the user s sole risk. custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns standard products shall also apply to such Bourns custom products. Users shall not sell, transfer, export or re-export any Bourns Bourns products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns products may not, without bilingual versions are available at: Web Page: PDF:
DCR DCR. Irms Isat. Max. Typ. Recommended Layout 5.2 (.205) 2.2 (.087) NATURAL COOLING
*RoHS COMPLIANT & AEC APPROVED R7 Features Shielded construction Carbonyl powder core High saturation current Low profile - 1. mm Inductance range:.1 to 1 µh AEC-Q qualified RoHS compliant* and halogen
SRP1038A Series - Shielded Power Inductors
*RoHS and AEC-Q COMPLIANT 131 Features Shielded construction Carbonyl powder core High saturation current Inductance range:. to 7 µh AEC-Q compliant RoHS compliant* and halogen free** SRP13A Series - Shielded
SRP7050TA Series - Shielded Power Inductors
*RoHS COMPLIANT, **HALOGEN FREE & AEC-Q COMPLIANT Features n Shielded construction n Carbonyl powder core n High saturation current n Inductance range:.33 to µh n AEC-Q compliant n RoHS compliant* and
Trimmer Potentiometers
PV6.pdf /9/7 Trimmer Potentiometers Lead Sealed Type Multiturn PV6 Series COMMON DIMENSIONS PV6 Series 6.40 ±. (.5 ±.05).8 MIN. (.05) 0.0 (.95).5 (.060).7 ± 0. (.050 ±.004) 4.8 ±. (.90 ±.005) 9.5 (.75)
TISP4G024L1W G.Fast VDSL Protector
*RoHS COMPLIANT U80L Features Low capacitance Low distortion Surge protection RoHS compliant* Applications G.Fast equipment xdsl modems and line cards TISP4G024LW G.Fast VDSL Protector General Information
SinglFuse SF-1206HHxxM Series Features
*RoHS COMPLIANT & **HALOGEN FREE X SinglFuse SF-1206HHxxM Series Features n Single blow fuse for overcurrent protection n 3216 (EIA 1206) footprint n High current rating applications n High inrush withstand
SM8S-Q Transient Voltage Suppressor Diode Series
*RoHS & **AEC-Q COMPLIANT 23 Features n Maximum Peak Power Dissipation: 66 watts n Meets ISO7637-2 / ISO675-2 Surge specification (varies by test condition) n RoHS compliant* n AEC-Q compliant** Applications
TISP4P0xxL1N Overvoltage Protector Series
*RoHS COMPLIANT Y1801L TISP4P015L1N THRU TISP4P035L1N LOW CAPACITANCE BIDIRECTIONAL THYRISTOR OEROLTAGE PROTECTOR TISP4P0xxL1N Overvoltage Protector Series Designed for ADSL, ADSL, DSL, DSL protection
EMS22A - Non-Contacting Absolute Encoder
*RoHS COMPLIANT Features 3.3 and 5 VC voltage supply option Absolute Bushing or servo mount Non-contacting magnetic technology Small size CMOS and TTL compatible Resolution: 1024 positions Long life High
CRT-ST Series - Thin Film Precision Chip Resistors
*RoHS COMPLINT 01C Features n Ultra-tight tolerance n Wide resistance range n RoHS compliant* n Four package sizes available pplications n Current sense n Precision circuits n Printers n utomation equipment
TISP4A250H3BJ Overvoltage Protector
*RoHS COMPLIANT TISP4A250H3BJ ASYMMETRICAL-BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTOR TISP4A250H3BJ Overvoltage Protector RING Line Protection for: LCAS (Line Card Access Switch) such as Le75181, Le75183
Power Inductors, Shielded
The Shielded Power are low profile, surface-mount inductors. They are designed for power applications or high current applications. Key Features High reliability and easy surface mount assembly Low loss
High power density, high efficiency, low profile shielded drum core power inductors
Supersedes pril 2014 High power density, high efficiency, low profile shielded drum pplications Notebook power LCD panels Desktop and servers DVD players and portable power devices DC-DC Converters Buck,
Low Profile High Current Shielded Inductor TL2020SG11 (5.49x5.18x3.0mm)
ow Profile High Current Shielded Inductor TSG (.9x.x3.mm) FEATURES: APPICATIONS: owest height (3.mm) in this package footprint PDA/notebook/desktop/server applications Operating temperature range - C to
High Current, High Frequency, Miniature Power Inductors
ECS-MPI4040 High Current, High Frequency, Automotive Applications: Driver assistance Information Entertainment Lighting Product description: AEC-Q200 Qualified, Grade 1 Handles high transient inrush current
Shielded Power Inductors TL1010SG Series
Form Rev- /5/ Shielded Power Inductors TLSG Series FEATURES Low DCR and excellent current handling Operating temperature range: C to +5 C with Irms current, +5 C to +5 C with derated current Storage temperature
EMS22P - Non-Contacting PWM Encoder
*ohs COMPLIANT Features 3.3 and 5 VC voltage supply option PWM Absolute Position Bushing or servo mount Non-contacting magnetic technology Small size CMOS and TTL compatible esolution: 1024 states Long
FP1005R High frequency, high current power inductors
Supersedes December 2008 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) Server and desktop Central processing unit (CPU) Graphics
TISP4xxxH3/M3BJ Series for LCAS Protection
*RoHS COMPLIANT TISP4125H3BJ/TISP4219H3BJ, TISP4125M3BJ/TISP4219M3BJ LCAS AND TIP PROTECTION PAIRS BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTORS Customized Voltage for LCAS Protection Battery-Backed Ringing...
MPI40-V2 High current, low profile, miniature power inductors
Applications Handheld/mobile devices Portable media players Notebook/netbook/laptop regulators Tablets/smartbooks Battery operated devices LED drivers LCD displays Point-of-load (POL) converters Product
DR1050 Shielded power inductors
Shielded power inductors Supersedes March 2007 Applications LED/LCD backlighting High definition televisions (HDTV) Server and desktop power supplies Graphics cards and battery powered systems Point-of-load
DR1040 Shielded power inductors
Shielded power inductors Supersedes March 007 Applications LED/LCD backlighting High definition televisions (HDTV) Server and desktop power supplies Portable electronics Graphics cards and battery powered
SD3118 Low profile power inductors
SD38 Low profile power inductors Supersedes November 009 pplications Mobile/smart phones Tablets/e-readers Media players Digital cameras Small LED driver and LCD displays Handheld/mobile equipment Description
Inductors for Power Circuits
Inductors for Power Circuits Wound/STD magnetic shielded SPM series Type: SPM3012 (3.2x3.0 mm) SPM5030 (5.2x5.0 mm) SPM6530 (7.1x6.5 mm) Issue date: March 2012 Conformity to RoHS Directive: This means
Low Profile High Current Shielded Inductor TL2525SG01 (6.86x6.47x3mm)
ow Profile High Current Shielded Inductor TSG (6.86x6.7xmm) FEATURES: APPICATIONS: ow profile, height only (. mm) PDA/notebook/desktop/server applications Operating temperature range - C to + C High current
FP1309B High frequency, high current power inductors
Technical Data 10477 High frequency, high current power inductors Applications Servers Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) Server and desktop Central processing unit (CPU)
HCP0704 High current power inductors
Supersedes February 009 pplications Voltage Regulator Module (VRM) Multi-phase regulators Desktop and servers Base station equipment Notebook and laptop regulators Data networking and storage systems Point-of-load
MPI25-V2 High current, low profile, miniature power inductors
Technical Data 649 Effective July 8 MPI-V High current, low profile, miniature power inductors Product features High current carrying capacity in a compact standard 8 ( metric) footprint Magnetically shielded,
Lead free RoHS compliant* Low profile package Surface mount Very low forward voltage drop
*RoHS OMPLINT eatures Lead free RoHS compliant* Low profile package Surface mount Very low forward voltage drop This series is currently available, but not recommended for new designs. The Model 23- Series
DRQ Series Dual Winding, Shielded Inductors/Transformer
Description 5 C maximum total temperature operation Dual winding inductors that can be used as either a single inductor, or in coupled inductor/transformer applications (: turns ratio) Four sizes of shielded
HCM1103 High current power inductors
Supersedes June 2012 Applications Product features 11.5 x 10.3 x 3.0 mm maximum surface mount package Iron powder core material Magnetically shielded, low EMI High current carrying capacity, low core losses
INPAQ. Specification. WIP201610S L Series. Product Name. Power Inductor. Global RF/Component Solutions
WIP201610S L Series Specification Product Name Series Power Inductor WIP201610S L Series Size EIAJ 2016 WIP201610S L Series Engineering Specification 1. Scope Feature High saturation current realized by
DR1030 Shielded power inductors
Supersedes March 2007 Applications LED/LCD backlighting High definition televisions (HDTV) Server and desktop power supplies Portable electronics Notebook and laptop regulators Graphics cards and battery
High power density, high efficiency, shielded drum core power inductors
Supersedes pril 4 High power density, high efficiency, shielded drum core power inductors pplications Desktop and servers DVD and media players Portable and handheld devices LCD panels DC-DC converters
FP1008R7 High frequency, high current power inductors
Technical Data 1629 Effective December 216 FP18R7 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and high power density VRMs
HCV1605 High current power inductors
Technical Data 188 High current power inductors pplications Compatible with Picor Cool-Power ZVS Buck and Buck-Boost Regulator Families Environmental data Storage temperature range (Component): -55 C to
Sunlord Wire Wound SMD Power Inductor Page 1 of 7 SPECIFICATIONS
Sunlord Wire Wound SMD Power Inductor Page 1 of 7 SPECIFICATIONS Customer Product Name Wire Wound SMD Power Inductor Sunlord Part Number SWPA4020S T Customer Part Number [ New Released, Revised] SPEC No.:
SMD Common Mode Choke SMC 37 Series. Features. Applications. Mechanical Dimensions (in mm) Land Pattern (in mm) Schematic. xxx xxx
SMC 37 Series Features Compact Size High impedance but very high rated current and low RDC RoHS compliant Operating temperature: 4 C to +125 C with (4 C rise) Irms current. Storage Temperature Range: -4
HCM1307 High current power inductors
Applications Multi-phase regulators Voltage Regulator Modules (VRMs) Distributed power systems - converters Desktop and server VRMs and EVRDs Point-of-Load (POL) modules Field Programmable Gate Array (FPGA)
discontinued October 31, 2017 or until inventory is
Supersedes June 2017 Applications Computer and portable power devices LCD panels, DVD players Inductor: DC-DC converters Buck, boost, forward, and resonant converters Noise filtering and filter chokes
Low Profile, High Current IHLP Inductors
IHP-77MZ-5A ow Profile, High Current IHP Inductors Manufactured under one or more of the following: US Patents; 6,19,375/6,,7/6,9,9/6,6,. Several foreign patents, and other patents pending. STANDARD EECTRICA
CD-MBL1xxS Surface Mount Bridge Rectifier Diode
eatures n RoHS compliant* n Low power loss and high efficiency n High current capability n Low profile package pplications n operated products n omputer monitors n Set-top boxes n able modems General Information
TISP40xxH1BJ VLV Overvoltage Protector Series
*RoHS COMPLIANT TISP4015H1BJ, TISP4025H1BJ, TISP4030H1BJ, TISP4040H1BJ VERY LOW VOLTAGE BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTORS TISP40xxH1BJ VLV Overvoltage Protector Series Low Capacitance... 78
Kun Shan MAZO tech Co., Ltd
Page : 1 / 1 High Current, Power Inductors MPCA-63-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 7.3x6.8x 3.mm maximum surface mount package Powder iron core material
TISP83121D Unidirectional P & N-Gate Protector
*ohs COMPLINT DUL-GTE UNIDIECTIONL OVEVOLTGE POTECTO Unidirectional P & N-Gate Protector Overvoltage Protection for Dual-Voltage inging SLICs Programmable Protection Configurations up to ±100 V Typically
DRQ. Dual winding, high power density, shielded drum core power inductors. Technical Data DS4311. Applications. Environmental data.
Supersedes pril 0 Dual winding, high power density, shielded drum core power inductors pplications Desktop and servers DVD and media players Portable and handheld devices LCD panels s a transformer: SEPIC,
ECUS INTERNATIONAL CO.,LTD SMD Common Mode Line Filter SLD Series Features Compact Size For different noise supression frequency ran
SMD Common Mode Line Filter SLD Series Features Compact Size For different noise supression frequency range RoHS compliant Operating temperature: 40 C to +125 C with (40 C rise) Irms current. Storage Temperature
Low Profile High Current Shielded Inductors
ow Profile High Current Shielded Inductors TSG51 FEATURES: APPICATIONS: ow height (. mm) PDA/notebook/desktop/server applications Operating temperature range - 55 C to + C High current PO converters Frequency
SPECIFICATION FOR APPROVAL
Ⅰ. Configuration and dimensions: REV. 20160715-P PAGE 1/8 Marking Inductance code A' C H F A A' C E F G H 3.20 ±0.4 2.90 ±0.2 2.50 ±0.2 2.20 ±0.2 ±0.2 +0.3 0.60-0.0 1.80 1.40 Ⅱ. Description: a. Ferrite
CDSOD323-TxxC-DSL - TVS Diode Series
*RoHS OMPLINT & **HLOGN R eatures n Protects one line or one I/O port n idirectional configuration n S protection 30 max. n Low capacitance ~ 3 p typ. n Replaces 0805 MLV devices n RoHS compliant* n Halogen
FrelTec GmbH. Wire Wound SMD Power Inductor SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 5/27/2016 1/20 GmbH www.freltec.com SPECIFICATION Part Number 194 303010 * H * 151 * J * E02 _ Type Size Feature Type Value Toleranc e Packing Optio nal
HCM1104 High current power inductors
Technical Data 4370 High current power inductors Supersedes September 2017 Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-Load modules Desktop and server VRMs and EVRDs Base
FP2207R High frequency, high current power inductors
Technical Data 10673 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and highpower density VRMs Server and desktop Central processing
discontinued October 31, 2017 or until inventory is
Technical Data DS4314 Supersedes June 2017 ECONO-PAC /OCTA-PAC OCTA-PAC PLUS Applications Computer and portable power devices LCD panels, DVD players Inductor: DC-DC converters Buck, boost, forward, and
HCM1305. High current power inductors. Technical Data Applications. Environmental data. Product features
Supersedes June 2014 Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs Base station equipment Notebook and laptop regulators Battery
ECONO-PAC /OCTA-PAC OCTA-PAC PLUS Power Inductors and Transformers
Description Surface mount magnetics that can be used as single or coupled inductors or 1:1 transformers that provide isolation between two windings OCTA-PAC s are designed around high frequency, low loss
YAGEO CORPORATION SMD INDUCTOR / BEADS. Notebook computers, step-up and step-down converters. Flash memory programmers, etc...
YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SDS0402 Series These shielded ultra-miniature inductors can help designers achieving significantly longer battery life in handheld communication
HCV1707 High current power inductors
Technical Data 10712 High current power inductors Applications Compatible with Picor Cool-Power ZVS Buck and Buck-Boost Regulator Families Environmental data Storage temperature range (Component): -55
YAGEO CORPORATION SMD INDUCTOR / BEADS
YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SSL53HC Series These series have been specially designed for high current, low voltage DC-DC converter applications. This simple, rugged design
1 Form A Solid-State Relay
1 Form A Solid-State Relay i17966_6 DESCRIPTION The is an optically isolated 1 form A solid-state relay in a surface mount 4 pin SOP package. APPLICATIONS Security systems Instrumentation Industrial controls
Applications TPI L 180 N. Series Size Code Inductor Inductance Code nh Core Material TPI
Overview The KEMET TPI ferrite core inductors are designed for a very low core loss and its flat wire 1 turn through the construction design enables very high efficiency at large currents. The core material
HCM1707. High current power inductors. Technical Data Applications
Supersedes August Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs Data networking and storage systems Base station equipment Battery
Recommended Land Pattern: [mm]
![Recommended Land Pattern: [mm]](/thumbs/74/69672094.jpg "Recommended Land Pattern: [mm]")
Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: Properties Test conditions Value Unit Tol. Inductance 100 khz/ 100 mv L 1250 µh ±10% 6 7 1,7 Turns Ratio n 136 : 13 : 13 : 15 ±3%
SPECIFICATION FOR APPROVAL INDEX
SPECIFICATION FOR APPROVAL INDEX COVER PAGE INDEX. 0 SHAPES & DIMENSION. 1 PART NUMBER CODE 1 PRODUCT DETAIL 2-3 REEL DIMENSIONS 4 REEL PACKAGING QUANTITY 4 RELIABILITY AND TEST CONDITION.. 5 RECOMMENDED
Kun Shan MAZO tech Co., Ltd
Page : 1/9 High Current, Power Inductors LPCA-14-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 11.5x1.3x 4.mm maximum surface mount package Powder iron core material
FP2 Low profile, high current power inductors
Supersedes July 014 FP Low profile, high current power inductors Product description High current carrying capacity Dual conductors allow for low inductance and high current or high inductance and lower
SPECIFICATIONS. Wire Wound SMD Power Inductor SWPA4018S Series Customer Part Number. [ New Released, Revised] SPEC No.: SWPA120000
![SPECIFICATIONS. Wire Wound SMD Power Inductor SWPA4018S Series Customer Part Number. [ New Released, Revised] SPEC No.: SWPA120000](/thumbs/89/100532504.jpg "SPECIFICATIONS. Wire Wound SMD Power Inductor SWPA4018S Series Customer Part Number. [ New Released, Revised] SPEC No.: SWPA120000")
Sunlord Specifications for Wire Wound SMD Power Inductor Page 1 of 11 SPECIFICATIONS Customer Product Name Sunlord Part Number Wire Wound SMD Power Inductor SWPA4018S Series Customer Part Number [ New
Recommended Land Pattern: [mm]
![Recommended Land Pattern: [mm]](/thumbs/74/70734758.jpg "Recommended Land Pattern: [mm]")
Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: Properties Test conditions Value Unit Tol. Heat shrinkable Tubing (black) Inductance 125 khz/ 10 ma L 5.3 µh ±10% Q-Factor 125 khz/
Coiltronics. High Frequency Inductor Catalog Magnetics for Power Management
Coiltronics High Frequency Inductor Catalog Magnetics for Power Management Magnetics Products for Power Management Table of Contents Inductor Series Size (mm) Page FP0705 7 x 7 x 5 4 FP0708 7 x 8.5 x 7.
CD123D-B1xR Schottky Barrier Chip Diode Series
*RoHS OMPLINT & **HLOGN R eatures n RoHS compliant* n Leadless chip form n High current capability n Low forward voltage n Halogen free** pplications n Switch Mode Power Supplies (SMPS) n Portable equipment
Recommended Hole Pattern: [mm]
![Recommended Hole Pattern: [mm]](/thumbs/79/80144687.jpg "Recommended Hole Pattern: [mm]")
Dimensions: [mm] sectional drawing A-A B 44,0 ±0,5 25,0 ±2,0 Copper Coil Recommended Hole Pattern: [mm] O 1,0 1 2 3 4 Electrical Properties: Properties Inductance Q-Factor Test conditions 125 khz/ 10 ma
P7605 Family POWER INDUCTOR PRODUCT DATA SHEET
PRODUCT DATA SHEET POWER INDUCTOR P7605 Family Features Lead-free (Pb-free) RoHS compliant High Current (Saturation to 20A) Low DCR (to 9mΩ) Low profile (to
ECUS INTERNATIONAL CO.,LTD SMD Common Mode Line Filter CLF 0905 Series Features Compact Size Mn and NiZn cores for different noise s
SMD Common Mode Line Filter CLF 0905 Series Features Compact Size Mn and NiZn cores for different noise supression frequency range RoHS compliant Operating : 40 C to +125 C with (40 C rise) Irms current.
Optocoupler, Photodarlington Output, High Gain, 300 V BV CEO
Optocoupler, Photodarlington Output, High Gain, 300 V BO i79060 DESCRIPTION i79062-3 The is optically coupled isolators with a gallium arsenide infrared LED and a silicon photodarlington sensor. Switching
MPIA25-V2 Automotive grade High current, low profile, miniature power inductors
Product features AEC-Q qualified High current carrying capacity in a compact standard 8 ( metric) footprint Magnetically shielded, Low EMI Rugged construction Self resonant frequency (SRF) greater than
PLEDxN Series. PLED Open LED Protectors PLEDxN Series. RoHS. Description
RoHS Description The open LED protector provides a switching electronic shunt path when a single LED in an LED string fails as an open circuit. This ensures the entire LED string will continue to function
Kun Shan MAZO tech Co., Ltd
Page : 1 / 8 High Current, Power Inductors MPCA-412-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 4.75 x 4.45 x 1.2mm maximum surface mount package Powder iron core
FEATURES. IHLP-3232DZ μh ± 20 % ER e3 MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD
IHP-33DZ- IHP Commercial Inductors, High Temperature ( C) Series DESIGN SUPPORT TOOS click logo to get started Models Available STANDARD EECTRICA SPECIFICATIONS INDUCTANCE ± % AT khz,. V, A (μh) Design
Automotive grade Dual winding, high power density shielded drum core power inductors
Supersedes September 07 Dual winding, high power density shielded drum core power inductors Product features AEC-Q00 qualified Dual winding inductors that can be used as a single inductor, SEPIC, Flyback,
HCMA0703 Automotive grade High current power inductors
Automotive grade High current power inductors Supersedes August 2014 Description Automotive grade 3 qualified High current carrying capacity, low core losses Magnetically shielded, low EMI Frequency range
SMD High Frequency Power Inductor. Designed for VRD & VRM 10.x & 11.x Applications
Designed for VRD & VRM 1.x & 11.x Applications FEATURES Recommended for use with all major Voltage Regulator ICs High Current handling capability in the smallest footprint Up to 2MHz operating frequency
(TPSDC) SMD Low-DCR Power Inductor. Token Electronics Industry Co., Ltd. Version: January 13, Web:
Version: January 13, 2017 (TPSDC) SMD Low-DCR Power Inductor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New
Low profile metalized shielded drum core power inductors
Technical Data PM43 Supersedes March 7 pplications Digital cameras Media players Mobile phones Hand held equipment PCMCI cards GPS systems Product features Six sizes of shielded drum core inductors with
MPIA40-V2 Automotive grade High current, low profile, miniature power inductors
Technical Data 5 Effective April 7 MPIA-V Product features AEC-Q Grade qualified High current carrying capacity Magnetically shielded, Low EMI Rugged flexible construction Self resonant frequency (SRF)
DR Series High Power Density, High Efficiency, Shielded Inductors
DR Series High Power Density, High Efficiency, Shielded Inductors Description 5 C maximum total operating temperature Four sizes of shielded drum core inductors Inductance range from.33µh to µh Current
CL1208 Multi-phase power inductors
Technical Data 1579 Effective December 216 CL128 Multi-phase power inductors Applications For exclusive use with Maxim Multi-phase controllers Voltage Regulator Modules (VRMs) and high power density VRMs
Bicolor SMD LED PLCC-4
Bicolor SMD LED PLCC-4 DESCRIPTION 19211 These devices have been designed to meet the increasing demand for surface mounting technology. The package of the is the PLCC-4. It consists of a lead frame which
TISP4G024L1W G.Fast VDSL Protector
*RoHS COMPLIANT U80L Features n Low capacitance n Low distortion n Surge protection n RoHS compliant* Applications n G.Fast equipment n xdsl modems and line cards TISP4G024LW G.Fast VDSL Protector General
HCMA1305 Automotive grade High current power inductors
Automotive grade High current power inductors Supersedes August 2014 Product features AEC-Q200 qualified High current carrying capacity Low core losses Magnetically shielded, low EMI Frequency range up
CLB1108 Multi-phase power inductors
Multi-phase power inductors Supersedes December 2013 Applications For exclusive use with Volterra or Maxim VPR-Devices Environmental Data Storage temperature range (component): -40 C to +125 C Operating
CD0603-B0xR Schottky Barrier Chip Diode Series
*RoHS OMPLINT & **HLOGN R eatures n RoHS compliant* n Leadless chip form n High current capability n Low forward voltage n Halogen free** pplications n Switch Mode Power Supplies (SMPS) n Portable equipment
Coiltronics DRQ Series Dual winding, shielded inductors/transformers
Technical Data Effective pril 0 Supersedes December 007 Coiltronics DRQ Series Dual winding, pplications s a transformer: SEPIC, flyback s an inductor: buck, boost, coupled inductor DC-DC Converters VRM
Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS
Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS 17448-5 1 DESCRIPTION The features a variety of transfer ratios, low coupling capacitance and high isolation voltage. This coupler has
ESDARF02-1BU2CK. Single-line bidirectional ESD protection for high speed interface. Features. Applications. Description
Single-line bidirectional ESD protection for high speed interface Features Datasheet production data Bidirectional device Extra low diode capacitance: 0.2 pf Low leakage current 0201 SMD package size compatible
WIRE WOUND CHIP INDUCTORS HCI SERIES HCI 0805 F T 1R0 K - Introductions. Features. Part Number Code HCI SERIES
HCI SERIES WIRE WOUND CHIP INDUCTORS HCI SERIES Introductions Product : HCI Miniature SMD Inductor For Power Line Size : 0805 The HCI series are low profile inductor used in notebooks, PC s, Cellular phone
Shielded SMD Power Inductor
101 Features Dimensions Unit: mm -Directly connected electrode on ferrite core -Available in magnetically shielded -Low DC resistance -Suitable for large current -Available on tape and reel for auto surface
ESD051-1F4. Low clamping single line unidirectional ESD. Datasheet. Features. Application. Description
Datasheet Low clamping single line unidirectional ESD Features ST0201 package Low clamping voltage: -3 V / +9 V (IEC 61000-4-2 contact discharge at 30 ns) Unidirectional diode Low leakage current 0201
ESD-Protection Diode in LLP1006-2L
VESD5A1A-HD1 ESD-Protection Diode in LLP16-2L 2855 MARKING (example only) XY Bar = cathode marking X = date code Y = type code (see table below) 2 1 21121 2856 FEATURES Ultra compact LLP16-2L package Low
ESDAULC6-1U2. Single-line unidirectional ESD protection for high speed interface. Features. Applications. Description
Single-line unidirectional ESD protection for high speed interface Features Datasheet production data Unidirectional device Ultralow diode capacitance: 0.8 pf Low leakage current 0201 SMD package size
HP1, HPH1 HP2, HPH2 HP3, HPH3 HP4, HPH4 HP5, HPH5 HP6, HPH6. Winding Layout. Middle 11. Inner
Document - HP, HPH HP, HPH HP, HPH HP, HPH HP, HPH HP, HPH Six : isolated windings that can be connected in series or parallel Tightly coupled windings Power range: 0 Watts as inductor and flyback transformer;