CD0603-B0xR Schottky Barrier Chip Diode Series

Transcription

1 *RoHS OMPLINT & **HLOGN R eatures n RoHS compliant* n Leadless chip form n High current capability n Low forward voltage n Halogen free** pplications n Switch Mode Power Supplies (SMPS) n Portable equipment batteries n High frequency rectification n / converters n Telecommunications 63-xR Schottky arrier hip iode Series General Information Portable communications, computing and video equipment manufacturers are challenging the semiconductor industry to develop increasingly smaller electronic components. ourns offers small-signal Schottky arrier iodes for switching and rectification applications, in a compact chip package compatible with 63 (168 metric) size format. The Schottky arrier iodes offer a repetitive peak reverse voltage of 4 V with a choice of forward current of 2 m and 3 m. bsolute Maximum Ratings (@ T = 25 Unless Otherwise Noted) Parameter Symbol 24R 63-34R Maximum Repetitive Peak Reverse Voltage V RRM 4 V Maximum verage orward Rectified urrent (T = 55 ) I (V) 2 3 m Peak orward Surge urrent 8.3 ms Single Half Sine-Wave Superimposed on Rated Load (J Method) Unit I SM 2 Operating Temperature Range T J -4 to +125 Storage Temperature Range T STG -4 to +125 lectrical haracteristics (@ T = 25 Unless Otherwise Noted) Parameter Symbol Test ondition Min. Typ. Max. Unit I = 5 m.35 I = 1 m 63-24R.38 Instantaneous orward Voltage V I = 2 m.43.5 I = 1 m.38 V I = 2 m 63-34R.43 I = 3 m.47.5 Repetitive Peak Reverse urrent I RRM V R = 1 V 63-24R R 3 5 µ Junction apacitance J V R = 4 V, f = 1. MHz 35 p Thermal Resistance R θj Junction to mbient 16 R θjl Junction to Lead 11 /W sia-pacific: Tel: mail: asiacus@bourns.com M: Tel: mail: eurocus@bourns.com The mericas: Tel: mail: americus@bourns.com * RoHS irective 215/863, Mar 31, 215 and nnex. **ourns considers a product to be halogen free if (a) the romine (r) content is 9 ppm or less; (b) the hlorine (l) content is 9 ppm or less; and (c) the total romine (r) and hlorine (l) content is 15 ppm or less.

2 63-xR Schottky arrier hip iode Series Performance Graphs - Model 63-24R orward urrent erating urve Maximum Non-Repetitive Peak orward Surge urrent ms Single Half Sine-Wave (J Method) verage orward urrent () Peak orward Surge urrent () Lead Temperature ( ) Number of ycles at 6 Hz Typical orward haracteristics 1 Typical Reverse haracteristics 1m Instantaneous orward urrent (m) T J = 125 T J = Reverse urrent () 1m 1m 1u 1u 1u 1n T J = T J = orward Voltage (V) Percent of Rated Peak Reverse Voltage (%) Typical Junction apacitance 1 Junction apacitance (p) Reverse Voltage (V)

3 63-xR Schottky arrier hip iode Series Performance Graphs - Model 63-34R orward urrent erating urve.4 verage orward urrent () Maximum Non-Repetitive Peak orward Surge urrent Peak orward Surge urrent () ms Single Half Sine-Wave (J Method) Typical orward haracteristics Lead Temperature ( ) 1 1 Number of ycles at 6 Hz Typical Reverse haracteristics 1m Instantaneous orward urrent (m) T J = 125 T J = Reverse urrent () 1m 1m 1u 1u 1u 1n T J = 125 T J = orward Voltage (V) Percent of Rated Peak Reverse Voltage (%) Typical Junction apacitance 1 Junction apacitance (p) Reverse Voltage (V)

4 63-xR mm Schottky SM arrier Trimming hip iode Potentiometer Series Product imensions Recommended Pad Layout H I J K imension 63-xR G H I 1.1 (.43) MX..8 (.31) MIN. J.6 (.24) MIN. imension 63-xR 1.6 ±.1 (.63 ±.4).9 ±.1 (.35 ±.4) K IMNSIONS: 2.3 (.91) R. MM (INHS).7 ±.1 (.28 ±.4).2P. (.8) R.35 ±.5 (.14 ±.2) Physical Specifications ncapsulation.molded plastic per UL lass 94V- Polarity.. athode band indicates unidirectional device No cathode band indicates bidirectional device.6 +.2/-.1 ( /-.4) nvironmental Specifications G.3 (.1) Moisture Sensitivity Level.1 S lassification (HM)... 3 IMNSIONS: MM (INHS) How to Order Typical Part Marking R 43 VI O: 42 = 63-24R 43 = 63-34R ommon ode = hip iode Package 63 = 63 Package Model = Schottky arrier iode verage orward urrent 2 = 2 m 3 = 3 m Reverse Voltage 4 = 4 V

5 N5-54N 63-xR Schottky - TVS/Steering arrier hip iode iode rray Series Packaging Information The product will be dispensed in tape and reel format (see diagram below). P P 1 d Index Hole T 12 W 2 1 P Trailer evice Leader nd 3 PITHS 3 PITHS POLRITY STRIP irection of eed Start IMNSIONS: MM (INHS) evices are packed in accordance with I standard I-481- and specifications shown here. W 1 Item Symbol 63 arrier Width.99 ±.8 (.39 ±.3) arrier Length 1.82 ±.8 (.72 ±.3) arrier epth 1. ±.1 (.39 ±.4) Sprocket Hole d 1.5 ±.1 (.59 ±.4) Reel Outside iameter 178 ± 2. (7.8 ±.79) 6 ±.5 Reel Inner iameter 1 (2.362 ±.2) 13.5 ±.5 eed Hole iameter 2 (.532 ±.2) Sprocket Hole Position 1.75 ±.1 (.69 ±.4) Punch Hole Position 3.5 ±.5 (.138 ±.2) Punch Hole Pitch P 4. ±.1 (.157 ±.4) 4. ±.1 Sprocket Hole Pitch P (.157 ±.4) 2. ±.1 mbossment enter P 1 (.79 ±.4) Overall Tape Thickness T.4 (.16) MX. Tape Width W 8. ±.3 (.315 ±.12) 12. ±.5 Reel Width W 1 (.472 ±.2) Quantity per Reel -- 3 RV. 11/17

6 Legal isclaimer Notice This legal disclaimer applies to purchasers and users of ourns products manufactured by or on behalf of ourns, Inc. and its affiliates (collectively, ourns ). Unless otherwise expressly indicated in writing, ourns products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information before placing orders and should verify that such information is current and complete. The characteristics and parameters of a ourns product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on ourns knowledge of typical requirements in generic applications. The characteristics and parameters of a ourns product in a user application may vary from the data sheet characteristics and parameters due to a combination of the ourns product with other components in the user s application or due to the environment of the user application itself. Such characteristics and parameters also can and do vary in different applications and actual performance may vary over time. Users should always verify actual performance of the ourns product in their specific devices and applications, and make their own independent judgments about how much additional test margin to design in to compensate for differences between laboratory and real world conditions. Unless ourns has explicitly designated an individual ourns product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), ourns is not responsible for any failure of an individual ourns product to meet requirements of such industry standard or such particular qualification. Users of ourns products are responsible for ensuring compliance with safety-related requirements and standards applicable to their applications. ourns products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized ourns representatives on a case-by-case basis, use of any ourns products in such unauthorized applications is at the user s sole risk. Life-critical applications include devices identified by the U.S. ood and rug dministration as lass III devices and generally equivalent classifications outside of the United States. ourns standard products that are designed and tested for use in automotive applications will be described on the applicable data sheets as compliant with the applicable -Q standard. Unless expressly and specifically approved in writing by two authorized ourns representatives on a case-by-case basis, use of any other ourns standard products in an automotive application is not recommended, authorized or intended and will be at the user s sole risk. ourns standard products are not tested to comply with United States ederal viation dministration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. ourns standard products that are designed and tested for use in aircraft or space applications will be described on the applicable data sheets as compliant with the RT O-16 standard. Unless expressly and specifically approved in writing by two authorized ourns representatives on a case-by-case basis, use of any other ourns standard product in an aircraft or space application is not recommended, authorized or intended and will be at the user s sole risk. The use and level of testing applicable to ourns custom products shall be negotiated on a case-by-case basis by ourns and the user for which such ourns custom products are specially designed. bsent a written agreement between ourns and the user regarding the use and level of such testing, the provisions above applicable to ourns standard products shall also apply to such ourns custom products. Users shall not sell, transfer, export or re-export any ourns products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use ourns products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. urther, ourns products, technology or technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes, and ourns products may not, without prior authorization from ourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, ourns disclaims (i) any and all liability arising out of the application or use of any ourns standard product, (ii) any and all liability, including, without limitation, special, punitive, consequential or incidental damages, and (iii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. or your convenience, copies of this Legal isclaimer Notice with German, Spanish, Japanese, Traditional hinese and Simplified hinese bilingual versions are available at: Web Page: P: /18/17