5.0SMDJ Transient Voltage Suppressor Diode Series
|
|
- Erick Short
- 5 years ago
- Views:
Transcription
1 *RoHS OMPLINT eatures n RoHS compliant* and halogen free** n Surface mount SM package n Standoff voltage: 5 to 7 volts n Peak Pulse Power: 5 watts n Typical temperature coefficient: V R =. % x 25 x T 5.SMJ Transient Voltage Suppressor iode Series General Information Portable communications, computing and video equipment manufacturers are challenging the semiconductor industry to develop increasingly higher power density circuit protection components. ourns offers Transient Voltage Suppressor iodes for surge and S protection applications, in compact chip package O-24 (SM) size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 7 V and reakdown Voltage up to 29 V. Typical fast response times are less than. ps from V to reakdown Voltage. ourns hip iodes conform to J standards, are easy to handle with standard pick and place equipment and the flat configuration minimizes roll away. lectrical haracteristics (@ T = 25 Unless Otherwise Noted) Parameter Symbol Value Unit Minimum Peak Pulse Power issipation (T p = ms) (Note,2) P PK 5 Watts Peak orward Surge urrent 8.3 ms Single Half Sine Wave Superimposed on Rated Load I SM 3 mps (J Method) (Note 3,4) Steady State Power TL = 5 P M(V) 6.5 Watts Maximum Instantaneous orward I PP = (or Unidirectional Units Only) V 5 Volts Operating Temperature Range T J -55 to +5 Storage Temperature Range T STG -55 to +5. Non-repetitive current pulse, per Pulse Waveform graph and derated above T = 25 per Pulse erating urve. 2. Thermal Resistance Junction to Lead ms Single Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). 4. Mounted on 8. mm x 8. mm copper pad area to each terminal. How to Order 5.SMJ 2 - H sia-pacific: Tel: mail: asiacus@bourns.com urope: Tel: mail: eurocus@bourns.com The mericas: Tel: mail: americus@bourns.com Package 5.SMJ = SM/O-24 Working Peak Reverse Voltage 2 = 2 V RWM (Volts) Suffix = 5 % Tolerance Unidirectional evice = 5 % Tolerance idirectional evice Reel (lank) = 3-inch Reel -H = 7-inch Reel * RoHS irective 25/863, Mar 3, 25 and nnex. **ourns considers a product to be halogen free if (a) the romine (r) content is 9 ppm or less; (b) the hlorine (l) content is 9 ppm or less; and (c) the total romine (r) and hlorine (l) content is 5 ppm or less.
2 5.SMJ Transient Voltage Suppressor iode Series lectrical haracteristics T = 25 Unless Otherwise Noted) Unidirectional evice idirectional evice reakdown Voltage V R (Volts) Reverse Standoff Voltage Maximum Reverse V RWM Maximum lamping I PP Peak Pulse urrent Part Part Part Part Number Marking Number Marking Min. I T (m) V RWM (V) I R (μ) V (V) I PP () 5.SMJ5. 5R 5.SMJ SMJ6. 5RG 5.SMJ6. 5G SMJ6.5 5RK 5.SMJ6.5 5K SMJ7. 5PM 5.SMJ7. 5M SMJ7.5 5PP 5.SMJ7.5 5P SMJ8. 5PR 5.SMJ8. 5R SMJ8.5 5PT 5.SMJ8.5 5T SMJ9. 5PV 5.SMJ9. 5V SMJ 5PX 5.SMJ 5X SMJ 5PZ 5.SMJ 5Z SMJ2 5PP 5.SMJ2 5P SMJ3 5PQ 5.SMJ3 5Q SMJ4 5PR 5.SMJ4 5R SMJ5 5PS 5.SMJ5 5S SMJ6 5PT 5.SMJ6 5T SMJ7 5PU 5.SMJ7 5U SMJ8 5PV 5.SMJ8 5V SMJ2 5PW 5.SMJ2 5W SMJ22 5PX 5.SMJ22 5X SMJ24 5PZ 5.SMJ24 5Z SMJ26 5P 5.SMJ SMJ28 5PG 5.SMJ28 5G SMJ3 5PK 5.SMJ3 5K SMJ33 5PM 5.SMJ33 5M SMJ36 5PP 5.SMJ36 5P SMJ4 5PR 5.SMJ4 5R SMJ43 5PT 5.SMJ43 5T SMJ45 5PV 5.SMJ45 5V SMJ48 5PX 5.SMJ48 5X SMJ5 5PZ 5.SMJ5 5Z SMJ54 5RG 5.SMJ54 5G SMJ58 5PGG 5.SMJ58 5GG SMJ6 5PGK 5.SMJ6 5GK SMJ64 5PGM 5.SMJ64 5GM SMJ7 5PGP 5.SMJ7 5GP SMJ75 5PGR 5.SMJ75 5GR SMJ78 5PGT 5.SMJ78 5GT SMJ85 5PGV 5.SMJ85 5GV SMJ9 5PGX SMJ 5PGZ SMJ 5PH SMJ2 5PHG SMJ3 5PHK SMJ5 5PHM SMJ6 5PHP SMJ7 5PHR
3 5.SMJ Transient Voltage Suppressor iode Series Product imensions Recommended ootprint G THO N (UNIIRTIONL VIS ONLY) imension (Max.) (Min.) (Min.) SM (O-24) 4.69 (.85) 3.7 (.2).53 (.6) H IMNSIONS: (INHS) imension G H SM (O-24) ( ) ( ) ( ) (.6 -.2) ( ) (.2 -.8) (.8 -.3) (.3 -.6) Physical Specifications ncapsulation..molded plastic per UL lass 94V- Polarity.. athode band indicates unidirectional device No cathode band indicates bidirectional device nvironmental Specifications Moisture Sensitivity Level.. S lassification (HM)... 3 IMNSIONS: (INHS)
4 5.SMJ Transient Voltage Suppressor iode Series Rating & haracteristic urves Pulse erating urve Peak Pulse erating in Percent of Peak Power or urrent x Waveform as efined by R Junction Temperature ( ) Maximum Non-Repetitive Surge urrent 3 Peak orward Surge urrent (mps) at cycle 5 at 8 cycles Number of ycles at 6 Hz Pulse Waveform I P, Peak Pulse urrent (%) 5 TR= µs T=25 TP Peak value (IRSM) Half value= IRSM 2 Pulse width (TP) is defined as that point where the peak current decays to 5 % of IPSM Pulse Rating urve T, Time (ms) x waveform as defined by R... Typical Junction apacitance J - Junction apacitance (p) T J = 25 f =. MHz V sig = 5 mvp-p V R V R - Reverse reakdown Voltage (V) Steady State Power erating urve idirectional v=v Unidirectional v=v V R P PPM - Peak Pulse Power (kw) T = x 8. mm (.3 x.3 in.). opper Pad reas. µs. µs µs µs. ms ms P M(V) Steady State Power issipation (W) Hz Resistive or Inductive Load TL, Lead Temperature ( ) t d - Pulse Width (sec.)
5 N5-54N 5.SMJ Transient - TVS/Steering Voltage Suppressor iode iode rray Series Packaging Information The product will be dispensed in tape and reel format (see diagram below). P P d Index Hole T 2 W 2 P Trailer evice Leader nd pitches (min.) pitches (min.) Start IMNSIONS: (INHS) W irection of eed evices are packed in accordance with I standard I-48- and specifications shown here. 5/8 Item Symbol SM (O-24) 7-Inch Reel 3-Inch Reel arrier Width 6. ±.2 (.236 ±.79) arrier Length 8.3 ±.2 (.327 ±.8) arrier epth 2.5 ±.2 (.98 ±.8) Sprocket Hole d.5 ±. (.59 ±.4) Reel Outside iameter (7.8) (2.992) 5. Reel Inner iameter (.969) MIN /-.2 eed Hole iameter 2 ( /-.8) Sprocket Hole Position.75 ±. (.69 ±.4) Punch Hole Position 7.5 ±. (.295 ±.4) Punch Hole Pitch P 8. ±. (.35 ±.4) 4. ±. Sprocket Hole Pitch P (.57 ±.4) 2. ±. mbossment enter P (.79 ±.4) Overall Tape Thickness T.3±. (.2 ±.4) Tape Width W 6. ±.3 (.63 ±.2) 22.4 Reel Width W (.882) MX. Quantity per Reel ,
P4SMA Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n RoHS compliant* and halogen free** n Surface Mount SM package n reakdown Voltage: 6.8 to 55 volts n Peak Pulse Power: 4 watts n Typical temperature coefficient: V R =.1 % x V R
More informationSMCJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 15 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More information1.5SMC Transient Voltage Suppressor Diode Series
*RoHS OMPLINT & **HLOGN R eatures n RoHS compliant* and halogen free** n Surface Mount SM package n reakdown oltage: 6.8 to 55 volts n Peak Pulse Power: 5 watts n Typical temperature coefficient: R =.
More informationSMBJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 6 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More informationCD214C Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures Lead free RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 15 watts Model 214 is currently available, although not recommended for new designs.
More informationSMBJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n RoHS compliant* n Surface Mount SM package n Standoff Voltage: 5 to 495 volts n Power issipation: 6 watts pplications n I 6-4-2 S (Min. Level 4) n I 6-4-4 T n I 6-4-5 Surge SMJ
More informationSMCJ-Q Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n Surface Mount SM package n Standoff Voltage: 2 to 58 volts n Power issipation: 5 watts n RoHS compliant* n -Q compliant** pplications n Protection of power buses n Protection of
More informationCD214B Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures Lead free RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 6 watts Model 214 is currently available, although not recommended for new designs.
More informationSMBJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5 to 495 volts Power issipation: 6 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More informationSMBJ-Q Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n Surface Mount SM package n Standoff Voltage: 12 to 58 volts n Power issipation: 6 watts n RoHS compliant* n -Q11 compliant** pplications n Protection of power buses n Protection
More informationSMCJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 495 volts Power issipation: 15 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More information5.0SMDJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n RoHS compliant* and halogen free** n Surface mount SM package n Standoff voltage: 12 to 170 volts n Peak Pulse Power: 5000 watts n Typical temperature coefficient: V R = 0.1 % x
More informationSMLJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 3 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMLJ Transient Voltage
More informationSMAJ-Q Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n Surface Mount SM package n Standoff Voltage: 12 to 58 volts n Power issipation: 4 watts n RoHS compliant* n -Q1 compliant** pplications n Protection of power buses n Protection
More informationParameter Symbol Value Unit
*RoHS OMPLINT VRSIONS VILL eatures Lead free versions available RoHS compliant (lead free version)* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 6 watts 214 Transient Voltage
More informationSMLJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 3 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMLJ Transient Voltage
More informationCD214L Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 3 watts Model 214L is currently available, although not recommended for new designs. Model
More informationSMAJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 495 volts Power issipation: 4 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More informationSMAJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 495 volts Power issipation: 4 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More informationCD214A-B3xR Series Schottky Barrier Rectifier Chip Diode
*RoHS OMPLINT eatures n RoHS compliant* n Low profile n Low power loss, high efficiency n UL 94V-0 classification pplications n Switch Mode Power Supplies n Portable equipment batteries n High frequency
More informationCD214A-B120 ~ B1100 Schottky Barrier Rectifier Chip Diode
*RoHS OMPLINT eatures n RoHS compliant* n SM package n Surface mount n Very low forward voltage drop This series is currently available but not recommended for new designs. The Model 24-xR Series is the
More informationCD214A-B220 ~ B260 Schottky Barrier Rectifier Chip Diode
*RoHS OMPLINT eatures n RoHS compliant* n SM package n Surface mount n Very low forward voltage drop This series is currently available but not recommended for new designs. The Model 24-2xR Series is the
More informationCD-HD2x(L) Series Surface Mount Schottky Bridge Rectifier Diode
*RoHS OMPLINT eatures n RoHS compliant* n Low power loss and high efficiency n High current capability n Low profile package pplications n operated products n omputer monitors n Set-top boxes n able modems
More informationCD0603-B0xR Schottky Barrier Chip Diode Series
*RoHS OMPLINT & **HLOGN R eatures n RoHS compliant* n Leadless chip form n High current capability n Low forward voltage n Halogen free** pplications n Switch Mode Power Supplies (SMPS) n Portable equipment
More informationCD123D-B1xR Schottky Barrier Chip Diode Series
*RoHS OMPLINT & **HLOGN R eatures n RoHS compliant* n Leadless chip form n High current capability n Low forward voltage n Halogen free** pplications n Switch Mode Power Supplies (SMPS) n Portable equipment
More informationCDNBS08-SLVU Low Capacitance TVS Array
*RoHS OMPLINT eatures RoHS compliant* Protects up to four I/O ports Surge protection S protection Low capacitance: 6 p pplications thernet - 1/1 ase T Personal digital assistants LN devices Instrumentation
More informationCD214A-B220 ~ B260 Schottky Barrier Rectifier Chip Diode
Features SM package Surface mount Very low forward voltage drop General Information The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop
More informationCDDFN N - Surface Mount TVS Diode Array
*RoHS OMPLINT eatures n I -- (S) ±3 kv (ir/ontact) I -- (Lightning) (/ μs) n S protection to I -- (Level ) n RoHS compliant* pplications n WN/LN devices n // thernet N-7N - Surface Mount TVS iode rray
More informationCDSOT23-T24CAN CANbus Protector
*RoHS OMPLINT 2801L eatures n Single device for two I/O lines n Low capacitance for high-speed Nbus n I 61000-4-2 30 kv S n I 61000-4-5 (Level 1, WG 1.2/50) 500 V Surge n RoHS compliant* pplications n
More informationCDSOT23-T24CAN-Q CANbus Protector
*RoHS & OMPLINT eatures n Single device for two I/O lines n Low capacitance for high-speed Nbus n I 61000-4-2 30 kv S n I 61000-4-5 (Level 1, WG 1.2/50) 500 V Surge n RoHS compliant* n -Q101 compliant**
More informationSolution 1 TVS Diode Array: CDSOT C 2 Bridge Rectifiers: CDNBS04-B TVS Diode: SMBJ58A 1 Transformer: SM51108EL
Solution Products SOT236-0504 NS04-08200 Ethernet 10/100 ase-t Power over Ethernet (PoE) P Unit Protection Objective 10/100 ase-t Power over Ethernet (PoE) interfaces combine data and 48 V to provide remote
More informationCDSOD323-TxxC - TVS Diode Array Series
*RoS OMPLINT eatures n RoS compliant* n Protects one line or one I/O port n idirectional configuration n S protection 30 k max. n Low capacitance: ~3 p typical n Replaces 0805 ML devices pplications n
More informationCDSOD323-TxxLC - TVS Diode Series
**RoHS OMPLINT eatures n Lead free as standard* n S protection 30 k max. n Low capacitance ~.0 p n Protects line n Uni/bidirectional configuration pplications n HMI.4 n igital isual Interface (I) n US
More informationCD-MBL1xxS Surface Mount Bridge Rectifier Diode
eatures n RoHS compliant* n Low power loss and high efficiency n High current capability n Low profile package pplications n operated products n omputer monitors n Set-top boxes n able modems General Information
More informationSMF4L Transient Voltage Suppressor Diode Series
L V 8 8 Features n Surface Mount SO-23FL package n Standoff Voltage: 2 to 58 volts n Power issipation: 4 watts n RoHS compliant* pplications n Protection of power buses n Protection of /O interfaces n
More informationCDSOD323-TxxC-DSL - TVS Diode Series
*RoHS OMPLINT & **HLOGN R eatures n Protects one line or one I/O port n idirectional configuration n S protection 30 max. n Low capacitance ~ 3 p typ. n Replaces 0805 MLV devices n RoHS compliant* n Halogen
More informationLead free RoHS compliant* Low profile package Surface mount Very low forward voltage drop
*RoHS OMPLINT eatures Lead free RoHS compliant* Low profile package Surface mount Very low forward voltage drop This series is currently available, but not recommended for new designs. The Model 23- Series
More informationSM8S-Q Transient Voltage Suppressor Diode Series
*RoHS & **AEC-Q COMPLIANT 23 Features n Maximum Peak Power Dissipation: 66 watts n Meets ISO7637-2 / ISO675-2 Surge specification (varies by test condition) n RoHS compliant* n AEC-Q compliant** Applications
More informationCDSOT23-SR208 Steering Diode Array
*RoHS COMPLIANT A381L Features n Lead free device n RoHS compliant* n Protects four lines n ES and EFT protection n Low capacitance:
More informationTV06B5V0-HF Thru. TV06B441-HF
TV65V-HF Thru. TV644-HF Working Peak voltage: 5. to 44Volts Power Dissipation: 6 Watts RoHS Device Halogen Free Features -Glass passivated chip. -6W peak pulse power capability with a /μs -waveform, repetitive
More informationBOURNS CD214A-F150-F1600 Rectifier Datasheet
BOURNS CD214A-F150-F1600 Rectifier Datasheet http://www.manuallib.com/bourns/cd214a-f150-f1600-rectifier-datasheet.html The markets of portable communications, computing and video equipment are challenging
More informationATV66SM836A-G. SMD Transient Voltage Suppressor. Working Voltage: 36 Volts Peak Pulse Power: 6600 Watts RoHS Device. Features.
orking Voltage: 36 Volts Peak Pulse Power: 66 atts RoHS Device eatures -Glass passivated chip. -66 peak pulse power capability with a 1/µs waveform, repetitive rate (duty cycle):.1% -Meets ISO7637-2 5a
More informationATV02W5V0-HF Thru ATV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free
TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capability
More informationTV04A5V0-HF Thru. TV04A441-HF
TV45V-HF Thru. TV444-HF Working Peak : 5. to 44 Volts Power Dissipation: 4 Watts RoHS Device Halogen Free Features - Glass passivated chip. - 4W peak pulse power capability with a / µs waveform, repetitive
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More informationTV02W5V0-HF Thru TV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free
TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capility
More informationTV02W5V0-G Thru. TV02W191-G Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device
TV2W5V-G Thru. TV2W9-G Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capility with a /us waveform,repetitive
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The 1.5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional
More informationATV02W5V0-HF Thru ATV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free
TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capability
More informationDATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY 1.0SMB series
Product specification November 5, 28 V. DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY.SMB series RoHS compliant & Halogen free Transient Suppressors.SMB 2 Transient Suppressors (TVS) Data
More informationSA SERIES Taiwan Semiconductor
500W, 5V - 170V Transient Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from
More informationP4KE SERIES Taiwan Semiconductor
400W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 400W surge capability at 10 / 1000 μs waveform - Fast response time: Typically less than
More informationTV30C5V0-HF Thru. TV30C441-HF Working Peak Reverse Voltage: 5.0 to 440 Volts Power Dissipation: 3000 Watts RoHS Device Halogen Free
TV35V-HF Thru. TV344-HF Working Peak : 5. to 44 Volts Power Dissipation: 3 Watts RoHS Device Halogen Free Features - Glass passivated chip. - 3W peak pulse power capability with a /µs waveform, repetitive
More informationTV30C5V0-G Thru. TV30C441-G Working Peak Reverse Voltage: 5.0 to 440 Volts Power Dissipation: 3000 Watts RoHS Device
TV35V-G Thru. TV344-G Working Peak : 5. to 44 Volts Power Dissipation: 3 Watts RoHS Device Features - Glass passivated chip. - 3W peak pulse power capability with a /µs waveform, repetitive rate (duty
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. P6KE6V8(C)A - P6KE4(C)A 6W TRANSIENT VOLTAGE SUPPRESSOR Features 6W Peak Pulse
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More information5000W, 16V - 100V Surface Mount Transient Voltage Suppressor
5000W, 16V - 100V Surface Mount Transient Voltage Suppressor FEATURES 5000 watts peak pulse power capability at 10/1000μs waveform Ideal for automated placement Photo glass passivated junction Excellent
More information15,000 Watt Transient Voltage Suppressor (TVS) Protection Device
M1KP22A M1KP280CA(e3) Available 1,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This Transient Voltage Suppressor series of M1KP22A M1KP280CA offers an extended voltage range
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE DEVICES FOR BIPOLAR APPLICATIONS
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE TVS SMBJ SERIES FEATURES * Peak pulse power:600 W (/00 μs),4 kw (8/20 μs) * Plastic package has underwriters laboratory
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More informationP6KE SERIES Taiwan Semiconductor
600W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps
More informationGreen. Bottom View. Top View. Part Number Qualification Case Packaging SMCJXX(C)AQ-13-F* Automotive SMC 3000/Tape & Reel
Green J14()AQ J36()AQ 1,500W SURFAE MOUNT AUTOMOTIVE TRANSIENT VOLTAGE SUPPRESSOR Product Summary (@T A = +25 ) P PK I FSM (A) V RWM (V) PM (AV) 1500W 200 14-36 5W Features and Benefits 1500W Peak Pulse
More information15,000 Watt Transient Voltage Suppressor (TVS) Protection Device
Compliant 15,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This device clamps dangerous high-voltage short-term transients such as those produced by the secondary effects of
More information3000W, 10V - 100V Surface Mount Transient Voltage Suppressor
3000W, 10V - V Surface Mount Transient Voltage Suppressor FEATURES Ideal for automated placement Glass passivated junction Excellent clamping capability Fast response time: Typically less than 1.0ps Compliant
More informationDEVICES FOR BIPOLAR APPLICATIONS
SEMICONDUCTOR TECHNICAL SPECIFICATION GPP TRANSIENT VOLTAGE SUPPRESSOR 15 WATT PEAK POWER 5. WATTS STEADY STATE TVS 1.5KE SERIES FEATURES * Plastic package has underwriters laboratory certificate * Glass
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM. I 2 t 6.64 A 2 /Sec T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features Glass passivated junction Low zener impedance Excellent clamping capability 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty
More informationM C C. SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A. Features. Transient Voltage Suppressor 6.8 to 550 Volts 1500 Watt.
omponents 20736 Marilla Street Chatsworth!"# $%!"# SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A Features For surface mount applicationsin in order tooptimize board space Lead Free Finish/Rohs Compliant (Note1)
More informationBZW04 SERIES Taiwan Semiconductor
W, 5.8V - 376V Transient Voltage Suppressor BZW4 SERIES FEATURES - Excellent clamping capability - Low impedance surge resistance - W surge capability at / μs waveform - Very fast response time - Typical
More information30KP SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A =25 C unless otherwise specified
3KP SERIES 3W TRANSIENT VOLTAGE SUPPRESSOR Pb Features Glass Passivated Die Construction 3W Peak Pulse Power Dissipation 8V 88V Standoff Voltage A B A Uni- and Versions Available Excellent Clamping Voltage
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More informationTransient Voltage Suppression Diodes: P6SMB Series SMD Type 600 W
Features 1. For surface mounted applications 2. RoHS compliant and halogen-free 3. Reliable low cost construction utilizing molded plastic technique 4. Glass passivated chip junction 5. Both bi-directional
More information5000W Surface Mount Transient Voltage Suppressor
5000W Surface Mount Transient Voltage Suppressor 5000W Surface Mount Transient Voltage Suppressor Features Stand-off voltage from 12 to 170 volts Glass passivated chip junction Low inductance Excellent
More informationP6SMB11AT3G Series. TVS Diodes. Surface Mount > 600W > P6SMB11AT3G Series. Bi-directional. Cathode. Anode. Uni-directional.
P6SMB11AT3G Series Pb Description The P6SMB11AT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge
More informationFAIRCHILD TVS Is Now Part of
FAIRCHILD TVS Is Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in
More informationFAIRCHILD TVS Is Now Part of
FARCHLD TVS s Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in power
More informationSMBJ5.0 THRU SMBJ440CA
SMBJ5.0 THRU SMBJ440CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Stand-off : 5.0-440 Volts Peak pulse power: 600 Watts 0.087 (2.20) 0.071 (1.80) 0.096(2.44) 0.084(2.13) SMB/DO-214AA 0.180(4.57) 0.160(4.06)
More informationomponents Marilla Street Chatsworth Watts
omponents 2736 Marilla Street Chatsworth!"# $%!"# 5.SMLJA THRU 5.SMLJ4A Features Halogen free available upon request by adding suffix "-HF" For surface mount application in order to optimize board space
More informationMCC. P6KE6.8 THRU. Features. Maximum Ratings APPLICATION DO WATTS TRANSIENT VOLTAGE SUPPRESSOR 6.
Features Epoxy meets UL 94 V- flammability rating Moisture Sensitivity Level 1 omponents 2736 Marilla Street Chatsworth!"# $%!"# and suffix"c" designates bidirectional type Lead Free Finish/Rohs Compliant
More informationTV15C5V0-G Thru. TV15C441-G
TV55V-G Thru. TV544-G Working Peak : 5. to 44 Volts Power Dissipation: 5Watts RoHS Device Features - Glass passivated chip. - 5W peak pulse power capability with a /µs waveform, repetitive rate (duty cycle):.%
More information2 kw Surface Mount Transient Voltage Suppressor
Available 2 kw Surface Mount Transient Voltage Suppressor DESCRIPTION Screening in reference to MIL-PRF-190 available The MSMBG(J)2K3.0 MSMBG(J)2K5.0 series of surface mount 2.0 kilowatt transient voltage
More informationMCC. P6KE6.8 THRU P6KE540(C)A. Features. Maximum Ratings APPLICATION DO WATTS TRANSIENT VOLTAGE SUPPRESSOR 6.
Features omponents 2736 Marilla Street Chatsworth!"# $%!"# Economical series Available in both unidirectional and bidirectionalconstruction and suffix"c" designates bidirectional type Lead Free Finish/Rohs
More informationATV15C5V0-G Thru. ATV15C441-G
TV55V-G Thru. TV544-G Working Peak : 5. to 44 Volts Power Dissipation: 5Watts RoHS Device Features - Glass passivated chip. - 5W peak pulse power capability with a /µs waveform, repetitive rate (duty cycle):.%
More informationATV15C5V0-HF Thru. ATV15C441-HF Working Peak Reverse Voltage: 5.0 to 440 Volts Power Dissipation: 1500Watts RoHS Device Halogen Free
TV55V-HF Thru. TV544-HF Working Peak : 5. to 44 Volts Power Dissipation: 5Watts RoHS Device Halogen Free Features - Glass passivated chip. - 5W peak pulse power capability with a /µs waveform, repetitive
More information30KP Series 30000W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR R-6 PACKAGE WILLAS ELECTRONIC CORP. R-6 (Cathode band Only Uui-polarity product)
3W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR 3KP Series 1.(25.4)MIN..36(9.14).338(8.6) 1.(25.4)MIN. R-6 (Cathode band Only Uui-polarity product).52(1.32).47(1.2) Dimensions in inches and (millimeters) DIA..36(9.14).338(8.6)
More informationTransient Voltage Suppression Diodes: SMF Series SMD Type 200 W
Features 1. Low profile and space saving 2. For surface mounted applications 3. RoHS compliant 4. Reliable low cost construction utilizing molded plastic technique 5. Glass passivated chip 6. Both bi-directional
More informationCDDFN N - TVS/Steering Diode Array
*RoHS COMPLIANT Features Low capacitance -.3 pf ESD protection Vcc + six I/O s RoHS compliant* Applications USB 3. HDMI. High speed port protection Portable electronics CDDFN-N - TVS/Steering Diode Array
More informationGreen. Part Number Qualification Case Packaging P4SMAJXXADF-13 Commercial D-FLAT 10,000/Tape & Reel
Green 400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Features Mechanical Data Packaged in the Low Profile D-FLAT to Optimize Board Space Case: D-FLAT Glass Passivated Die Construction Excellent Clamping
More informationP6SMB Series. TVS Diodes Surface Mount 600W > P6SMB series. Description. Uni-directional
RoHS Pb e3 Uni-directional Description Bi-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More information500W Glass Passivated Junction Transient Voltage Suppressor. JEDEC DO-15 molded plastic body over passivated junction
Glass Passivated Junction Transient Voltage Suppressor SA5.0A -SA180CA 500W Glass Passivated Junction Transient Voltage Suppressor Features Stand-off voltage from 5.0 to 180 volts Glass passivated junction
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 1500 WATT PEAK POWER 6.5 WATTS STEADY STATE
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 15 WATT PEAK POWER 6.5 WATTS STEADY STATE TVS TFMCJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 15
More informationGPP TRANSIENT VOLTAGE SUPPRESSOR 3000 WATT PEAK POWER 7.5 WATTS STEADY STATE SYMBOL. W Steady State Power Dissipation at T L = 75 O C P M(AV) I FSM
GPP TRANSIENT VOLTAGE SUPPRESSOR 3 WATT PEAK POWER 7.5 WATTS STEADY STATE TVS 3KPSMC SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction *3 watt surage capability
More information1SMA5.0AT3G Series. TVS Diodes. Surface Mount > 400W > 1SMA5.0AT3G Series. Bi-directional. Cathode. Anode. Uni-directional.
SMA5.0AT3G Series Pb Description The SMA5.0AT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge
More informationICTE5.0 THRU ICTE15C SERIES
ICTE5.0 THRU ICTE15C SERIES TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR Stand-off Voltage - 5.0 to 15 Volts Peak Pulse Power - Watts Case Style 1.5KE 1.00 (25.4) MIN. 0.205 (5.207) 0.190 (4.826) DIA. 0.375
More information1.5SMC6.8AT3G. TVS Diodes. Surface Mount > 1500W > 1.5SMC6.8AT3G. Bi-directional. Cathode. Anode. Uni-directional. Description
1.5SMC6.8AT3G Pb Description The 1.5SMC6.8AT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge
More informationSuface Mount Transient Voltage Suppressor
FEATURES - Low profile package - Ideal for automated placement - Glass passivated junction - Built-in strain relief - Excellent clamping capability - Fast response time: Typically less than 1.0ps from
More informationP6SMB Transient Voltage Suppressor Diode Series
P6SMB Transient Voltage Suppressor Diode Series General Information The P6SMB series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping
More information1500 Watt Low Clamping Factor Transient Voltage Suppressor
1N6358 1N637 or Available 1500 Watt Low Clamping Factor Transient Voltage Suppressor DESCRIPTION This Transient Voltage Suppressor (TVS) series for 1N6358 through 1N637 are JEDEC registered selections
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM (uni-directional) 5.8 V to 459 V V WM (bi-directional) 5.8 V to 185 V V BR (uni-directional) 6.8 V to 540 V V BR (bi-directional)
More informationGeneral Purpose Plastic Rectifier
General Purpose Plastic Rectifier N400 thru N4007 DO-4AL (DO-4) MAJOR RATINGS AND CHARACTERISTICS I F(AV).0 A V RRM V to 00 V I FSM (8.3 ms sine-wave) A I FSM (square wave t p = ms) 45 A V F. V I R 5.0
More information