SMCJ Transient Voltage Suppressor Diode Series
|
|
- Gavin Henry
- 6 years ago
- Views:
Transcription
1 *RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 15 watts pplications I S (Min. Level 4) I T I Surge SMJ Transient Voltage Suppressor iode Series General Information The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly smaller electronic components. ourns offers Transient Voltage Suppressor iodes for surge and S protection applications, in compact chip package O-214 (SM) size format. The Transient Voltage Suppressor series offers a choice of Working Peak Voltage from 5 V up to 17 V and reakdown Voltage up to 2 V. Typical fast response times are less than 1. ns for unidirectional devices and less than 5. ns for bidirectional devices from V to Minimum reakdown Voltage. ourns hip iodes conform to J standards, are easy to handle with standard pick and place equipment and the flat configuration minimizes roll away. lectrical haracteristics (@ T = 25 Unless Otherwise Noted) Parameter Symbol Value Unit Minimum Peak Pulse Power issipation (T P = 1 ms) (Note 1,2) P PK 15 Watts Peak orward Surge urrent 8.3 ms Single Half Sine Wave Superimposed on Rated Load (J Method) (Note 3) I SM 2 mps Steady State Power TL = 75 P M(V) 5. Watts Instantaneous orward I PP = (or Unidirectional Units Only) V (Note 5) Volts Operating Temperature Range T J -55 to +15 Storage Temperature Range T STG -55 to Non-repetitive current pulse, per Pulse Waveform graph and derated above T = 25 per Pulse erating urve. 2. Thermal Resistance Junction to Lead ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). 4. Single Phase, Half Wave, 6 Hz, resistive or inductive load. or capacitive load, derate current by 2 %. 5. V = 3.5 V on SMJ5. through SMJ9 and V = 5. V on SMJ through SMJ17. How to Order SMJ 5. sia-pacific: Tel: ax: urope: Tel: ax: The mericas: Tel: ax: Package SMJ = SM/O-214 Working Peak Voltage 5. = 5. V RWM (Volts) Suffix = 5 % Tolerance Unidirectional evice = 5 % Tolerance idirectional evice *RoHS irective 22/95/ Jan including nnex. ustomers should verify actual device performance in their specifi c applications.
2 SMJ Transient Voltage Suppressor iode Series lectrical haracteristics T = 25 Unless Otherwise Noted) Unidirectional evice idirectional evice reakdown Voltage V R (Volts) Working Peak Voltage V RWM I RSM Surge urrent Part Part Part Part V Min. I Number Marking Number Marking T (m) RWM (Volts) I R (μ) V RSM (Volts) I RSM (mps) SMJ5. G SMJ SMJ6. GG SMJ6. G SMJ6.5 GK SMJ6.5 K SMJ7. GM SMJ7. M SMJ7.5 GP SMJ7.5 P SMJ8. GR SMJ8. R SMJ8.5 GT SMJ8.5 T SMJ9. GV SMJ9. V SMJ1 GX SMJ1 X SMJ11 GZ SMJ11 Z SMJ12 G SMJ SMJ13 GG SMJ13 G SMJ14 GK SMJ14 K SMJ15 GM SMJ15 M SMJ16 GP SMJ16 P SMJ17 GR SMJ17 R SMJ18 GT SMJ18 T SMJ2 GV SMJ2 V SMJ22 GX SMJ22 X SMJ24 GZ SMJ24 Z SMJ26 G SMJ SMJ28 GG SMJ28 G SMJ3 GK SMJ3 K SMJ33 GM SMJ33 M SMJ36 GP SMJ36 P SMJ4 GR SMJ4 R SMJ43 GT SMJ43 T SMJ45 GV SMJ45 V SMJ48 GX SMJ48 X SMJ51 GZ SMJ51 Z SMJ54 GG SMJ54 G SMJ58 GGG SMJ58 GG SMJ6 GGK SMJ6 GK SMJ64 GGM SMJ64 GM SMJ7 GGP SMJ7 GP SMJ75 GGR SMJ75 GR SMJ78 GGT SMJ78 GT SMJ85 GGV SMJ85 GV SMJ9 GGX SMJ9 GX SMJ GGZ SMJ GZ SMJ11 GH SMJ11 H SMJ12 GHG SMJ12 HG SMJ13 GHK SMJ13 HK SMJ15 GHM SMJ15 HM SMJ16 GHP SMJ16 HP SMJ17 GHR SMJ17 HR Notes: 1. Suffix denotes a 5 % tolerance unidirectional device. 3. or bidirectional devices with a V R of 1 volts or less, the I R limit is double. 2. Suffix denotes a 5 % tolerance bidirectional device. 4. or unidirectional devices with a V max. of 3.5 V at an I of 35,.5 Sine Wave of 8.3 ms Pulse Width. ustomers should verify actual device performance in their specifi c applications.
3 SMJ Transient Voltage Suppressor iode Series Product imensions Recommended ootprint G H imension G H SM (O-214) ( ) ( ) ( ) ( ) ( ) (.2 -.8) ( ) (.3 -.6) imension (Max.) (Min.) (Min.) Physical Specifications IMNSIONS: SM (O-214) 4.69 (.185) 3.7 (.121) 1.52 (.6) (INHS) ase Molded plastic per UL lass 94V- Polarity athode band indicates unidirectional device No cathode band indicates bidirectional device Weight...7 ounces /.21 grams IMNSIONS: (INHS) ustomers should verify actual device performance in their specifi c applications.
4 SMJ Transient Voltage Suppressor iode Series Rating & haracteristic urves Pulse erating urve Non-Repetitive Surge urrent Peak Pulse erating in Percent of Peak Power or urrent x Waveform as efined by R mbient Temperature ( ) Peak orward Surge urrent (mps) 2 Pulse Width 8.3 ms Single Half Sine-Wave (J Method) Number of ycles at 6 Hz Pulse Waveform Typical Junction apacitance I P, Peak Pulse urrent (%) 5 TR=1 µs Peak value (IRSM) Half value= IRSM 2 T=25 TP Pulse width (TP) is defined as that point where the peak current decays to 5 % of IPSM. 1 x waveform as defined by R... apacitance (p) idirectional Unidirectional T = T, Time (ms) 1 Standoff Voltage (Volts) Pulse Rating urve P P, Peak Power (KW) mm Lead reas T = 25 Non-repetitive Pulse Waveform Shown in Pulse Waveform Graph.1.1 µs 1. µs 1 µs µs 1. ms 1 ms TP, Pulse Width RM(V) Steady State Power issipation (W) Steady State Power erating urve Hz Resistive or Inductive Load TL, Lead Temperature ( ) ustomers should verify actual device performance in their specifi c applications.
5 N5-54N SMJ Transient - Voltage TVS/Steering Suppressor iode iode rrayseries Packaging Information The product will be dispensed in tape and reel format (see diagram below). P P 1 d Index Hole T 12 W 2 1 P Trailer evice Leader nd 1 pitches (min.) 1 pitches (min.) Start IMNSIONS: (INHS) W 1 irection of eed evices are packed in accordance with I standard RS-481- and specifications shown here. Item Symbol SM (O-214) arrier Width 7.22 ±.1 ( ) arrier Length 8.11 ±.1 (.319 ±.4) arrier epth 2.36 ±.1 (.93 ±.4) Sprocket Hole d 1.55 ±.5 (.61 ±.2) Reel Outside iameter 33 (12.992) 5. Reel Inner iameter 1 (1.969) MIN. 13. ±.2 eed Hole iameter 2 (.512 ±.8) Sprocket Hole Position 1.75 ±.1 (.69 ±.4) Punch Hole Position 7.5 ±.5 (.295 ±.2) Punch Hole Pitch P 4. ±.1 (.157 ±.4) 4. ±.1 Sprocket Hole Pitch P (.157 ±.4) 2. ±.5 mbossment enter P 1 (.79 ±.2) Overall Tape Thickness T.3 ±.1 (.12 ±.4) Tape Width W 16. ±.2 (.63 ±.8) 22.4 Reel Width W 1 (.882) MX. Quantity per Reel -- 3, 2/1 ustomers should verify actual device performance in their specifi c applications.
CD214C Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures Lead free RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 15 watts Model 214 is currently available, although not recommended for new designs.
More informationSMCJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 495 volts Power issipation: 15 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More informationSMBJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 6 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More informationSMLJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 3 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMLJ Transient Voltage
More informationCD214B Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures Lead free RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 6 watts Model 214 is currently available, although not recommended for new designs.
More informationSMBJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5 to 495 volts Power issipation: 6 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More informationSMBJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n RoHS compliant* n Surface Mount SM package n Standoff Voltage: 5 to 495 volts n Power issipation: 6 watts pplications n I 6-4-2 S (Min. Level 4) n I 6-4-4 T n I 6-4-5 Surge SMJ
More informationP4SMA Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n RoHS compliant* and halogen free** n Surface Mount SM package n reakdown Voltage: 6.8 to 55 volts n Peak Pulse Power: 4 watts n Typical temperature coefficient: V R =.1 % x V R
More informationCD214L Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 3 watts Model 214L is currently available, although not recommended for new designs. Model
More information5.0SMDJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n RoHS compliant* and halogen free** n Surface mount SM package n Standoff voltage: 5 to 7 volts n Peak Pulse Power: 5 watts n Typical temperature coefficient: V R =. % x VR @ 25
More informationSMLJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 3 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMLJ Transient Voltage
More informationSMAJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 495 volts Power issipation: 4 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More informationParameter Symbol Value Unit
*RoHS OMPLINT VRSIONS VILL eatures Lead free versions available RoHS compliant (lead free version)* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 6 watts 214 Transient Voltage
More information1.5SMC Transient Voltage Suppressor Diode Series
*RoHS OMPLINT & **HLOGN R eatures n RoHS compliant* and halogen free** n Surface Mount SM package n reakdown oltage: 6.8 to 55 volts n Peak Pulse Power: 5 watts n Typical temperature coefficient: R =.
More informationSMAJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 495 volts Power issipation: 4 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More informationSMCJ-Q Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n Surface Mount SM package n Standoff Voltage: 2 to 58 volts n Power issipation: 5 watts n RoHS compliant* n -Q compliant** pplications n Protection of power buses n Protection of
More informationSMBJ-Q Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n Surface Mount SM package n Standoff Voltage: 12 to 58 volts n Power issipation: 6 watts n RoHS compliant* n -Q11 compliant** pplications n Protection of power buses n Protection
More informationSMAJ-Q Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n Surface Mount SM package n Standoff Voltage: 12 to 58 volts n Power issipation: 4 watts n RoHS compliant* n -Q1 compliant** pplications n Protection of power buses n Protection
More informationCD214A-B120 ~ B1100 Schottky Barrier Rectifier Chip Diode
*RoHS OMPLINT eatures n RoHS compliant* n SM package n Surface mount n Very low forward voltage drop This series is currently available but not recommended for new designs. The Model 24-xR Series is the
More informationCD214A-B220 ~ B260 Schottky Barrier Rectifier Chip Diode
*RoHS OMPLINT eatures n RoHS compliant* n SM package n Surface mount n Very low forward voltage drop This series is currently available but not recommended for new designs. The Model 24-2xR Series is the
More informationCDNBS08-SLVU Low Capacitance TVS Array
*RoHS OMPLINT eatures RoHS compliant* Protects up to four I/O ports Surge protection S protection Low capacitance: 6 p pplications thernet - 1/1 ase T Personal digital assistants LN devices Instrumentation
More informationCD214A-B3xR Series Schottky Barrier Rectifier Chip Diode
*RoHS OMPLINT eatures n RoHS compliant* n Low profile n Low power loss, high efficiency n UL 94V-0 classification pplications n Switch Mode Power Supplies n Portable equipment batteries n High frequency
More informationCD-HD2x(L) Series Surface Mount Schottky Bridge Rectifier Diode
*RoHS OMPLINT eatures n RoHS compliant* n Low power loss and high efficiency n High current capability n Low profile package pplications n operated products n omputer monitors n Set-top boxes n able modems
More informationCD214A-B220 ~ B260 Schottky Barrier Rectifier Chip Diode
Features SM package Surface mount Very low forward voltage drop General Information The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop
More informationSolution 1 TVS Diode Array: CDSOT C 2 Bridge Rectifiers: CDNBS04-B TVS Diode: SMBJ58A 1 Transformer: SM51108EL
Solution Products SOT236-0504 NS04-08200 Ethernet 10/100 ase-t Power over Ethernet (PoE) P Unit Protection Objective 10/100 ase-t Power over Ethernet (PoE) interfaces combine data and 48 V to provide remote
More information5.0SMDJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n RoHS compliant* and halogen free** n Surface mount SM package n Standoff voltage: 12 to 170 volts n Peak Pulse Power: 5000 watts n Typical temperature coefficient: V R = 0.1 % x
More informationCD0603-B0xR Schottky Barrier Chip Diode Series
*RoHS OMPLINT & **HLOGN R eatures n RoHS compliant* n Leadless chip form n High current capability n Low forward voltage n Halogen free** pplications n Switch Mode Power Supplies (SMPS) n Portable equipment
More informationLead free RoHS compliant* Low profile package Surface mount Very low forward voltage drop
*RoHS OMPLINT eatures Lead free RoHS compliant* Low profile package Surface mount Very low forward voltage drop This series is currently available, but not recommended for new designs. The Model 23- Series
More informationCDDFN N - Surface Mount TVS Diode Array
*RoHS OMPLINT eatures n I -- (S) ±3 kv (ir/ontact) I -- (Lightning) (/ μs) n S protection to I -- (Level ) n RoHS compliant* pplications n WN/LN devices n // thernet N-7N - Surface Mount TVS iode rray
More informationCD123D-B1xR Schottky Barrier Chip Diode Series
*RoHS OMPLINT & **HLOGN R eatures n RoHS compliant* n Leadless chip form n High current capability n Low forward voltage n Halogen free** pplications n Switch Mode Power Supplies (SMPS) n Portable equipment
More informationCDSOT23-T24CAN CANbus Protector
*RoHS OMPLINT 2801L eatures n Single device for two I/O lines n Low capacitance for high-speed Nbus n I 61000-4-2 30 kv S n I 61000-4-5 (Level 1, WG 1.2/50) 500 V Surge n RoHS compliant* pplications n
More informationCDSOD323-TxxLC - TVS Diode Series
**RoHS OMPLINT eatures n Lead free as standard* n S protection 30 k max. n Low capacitance ~.0 p n Protects line n Uni/bidirectional configuration pplications n HMI.4 n igital isual Interface (I) n US
More informationCD-MBL1xxS Surface Mount Bridge Rectifier Diode
eatures n RoHS compliant* n Low power loss and high efficiency n High current capability n Low profile package pplications n operated products n omputer monitors n Set-top boxes n able modems General Information
More informationSMF4L Transient Voltage Suppressor Diode Series
L V 8 8 Features n Surface Mount SO-23FL package n Standoff Voltage: 2 to 58 volts n Power issipation: 4 watts n RoHS compliant* pplications n Protection of power buses n Protection of /O interfaces n
More informationCDSOT23-T24CAN-Q CANbus Protector
*RoHS & OMPLINT eatures n Single device for two I/O lines n Low capacitance for high-speed Nbus n I 61000-4-2 30 kv S n I 61000-4-5 (Level 1, WG 1.2/50) 500 V Surge n RoHS compliant* n -Q101 compliant**
More informationCDSOD323-TxxC - TVS Diode Array Series
*RoS OMPLINT eatures n RoS compliant* n Protects one line or one I/O port n idirectional configuration n S protection 30 k max. n Low capacitance: ~3 p typical n Replaces 0805 ML devices pplications n
More informationTV15C5V0-G Thru. TV15C441-G
TV55V-G Thru. TV544-G Working Peak : 5. to 44 Volts Power Dissipation: 5Watts RoHS Device Features - Glass passivated chip. - 5W peak pulse power capability with a /µs waveform, repetitive rate (duty cycle):.%
More informationATV15C5V0-G Thru. ATV15C441-G
TV55V-G Thru. TV544-G Working Peak : 5. to 44 Volts Power Dissipation: 5Watts RoHS Device Features - Glass passivated chip. - 5W peak pulse power capability with a /µs waveform, repetitive rate (duty cycle):.%
More informationCDSOD323-TxxC-DSL - TVS Diode Series
*RoHS OMPLINT & **HLOGN R eatures n Protects one line or one I/O port n idirectional configuration n S protection 30 max. n Low capacitance ~ 3 p typ. n Replaces 0805 MLV devices n RoHS compliant* n Halogen
More informationATV15C5V0-HF Thru. ATV15C441-HF Working Peak Reverse Voltage: 5.0 to 440 Volts Power Dissipation: 1500Watts RoHS Device Halogen Free
TV55V-HF Thru. TV544-HF Working Peak : 5. to 44 Volts Power Dissipation: 5Watts RoHS Device Halogen Free Features - Glass passivated chip. - 5W peak pulse power capability with a /µs waveform, repetitive
More informationCDSOT23-SR208 Steering Diode Array
*RoHS COMPLIANT A381L Features n Lead free device n RoHS compliant* n Protects four lines n ES and EFT protection n Low capacitance:
More informationSM8S-Q Transient Voltage Suppressor Diode Series
*RoHS & **AEC-Q COMPLIANT 23 Features n Maximum Peak Power Dissipation: 66 watts n Meets ISO7637-2 / ISO675-2 Surge specification (varies by test condition) n RoHS compliant* n AEC-Q compliant** Applications
More informationBOURNS CD214A-F150-F1600 Rectifier Datasheet
BOURNS CD214A-F150-F1600 Rectifier Datasheet http://www.manuallib.com/bourns/cd214a-f150-f1600-rectifier-datasheet.html The markets of portable communications, computing and video equipment are challenging
More informationTV06B5V0-HF Thru. TV06B441-HF
TV65V-HF Thru. TV644-HF Working Peak voltage: 5. to 44Volts Power Dissipation: 6 Watts RoHS Device Halogen Free Features -Glass passivated chip. -6W peak pulse power capability with a /μs -waveform, repetitive
More informationTV02W5V0-G Thru. TV02W191-G Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device
TV2W5V-G Thru. TV2W9-G Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capility with a /us waveform,repetitive
More informationTV02W5V0-HF Thru TV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free
TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capility
More informationATV66SM836A-G. SMD Transient Voltage Suppressor. Working Voltage: 36 Volts Peak Pulse Power: 6600 Watts RoHS Device. Features.
orking Voltage: 36 Volts Peak Pulse Power: 66 atts RoHS Device eatures -Glass passivated chip. -66 peak pulse power capability with a 1/µs waveform, repetitive rate (duty cycle):.1% -Meets ISO7637-2 5a
More informationTV04A5V0-HF Thru. TV04A441-HF
TV45V-HF Thru. TV444-HF Working Peak : 5. to 44 Volts Power Dissipation: 4 Watts RoHS Device Halogen Free Features - Glass passivated chip. - 4W peak pulse power capability with a / µs waveform, repetitive
More informationATV02W5V0-HF Thru ATV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free
TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capability
More informationFAIRCHILD TVS Is Now Part of
FARCHLD TVS s Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in power
More informationATV02W5V0-HF Thru ATV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free
TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capability
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The 1.5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. P6KE6V8(C)A - P6KE4(C)A 6W TRANSIENT VOLTAGE SUPPRESSOR Features 6W Peak Pulse
More informationDATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY 1.0SMB series
Product specification November 5, 28 V. DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY.SMB series RoHS compliant & Halogen free Transient Suppressors.SMB 2 Transient Suppressors (TVS) Data
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features Glass passivated junction Low zener impedance Excellent clamping capability 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty
More information15,000 Watt Transient Voltage Suppressor (TVS) Protection Device
Compliant 15,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This device clamps dangerous high-voltage short-term transients such as those produced by the secondary effects of
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More information15,000 Watt Transient Voltage Suppressor (TVS) Protection Device
M1KP22A M1KP280CA(e3) Available 1,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This Transient Voltage Suppressor series of M1KP22A M1KP280CA offers an extended voltage range
More informationComchip 3KP-G Transient Voltage Suppressor Datasheet
Comchip 3KP-G Transient Suppressor Datasheet http://www.manuallib.com/comchip/3kp-g-transient-voltage-suppressor-datasheet.html Features -Glass passivated chip. -Low leakage. -Uni and Bidirection unit.
More informationICTE5.0 THRU ICTE15C SERIES
ICTE5.0 THRU ICTE15C SERIES TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR Stand-off Voltage - 5.0 to 15 Volts Peak Pulse Power - Watts Case Style 1.5KE 1.00 (25.4) MIN. 0.205 (5.207) 0.190 (4.826) DIA. 0.375
More informationSMCG5.0A thru SMCG188CA. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.0 V to 188 V V BR (uni-directional) 6.4 V to 231 V V BR (bi-directional) 6.4 V to 231 V P PPM 1500 W P D 6.5 W I FSM
More informationTransient Voltage Suppression Diodes: SMF Series SMD Type 200 W
Features 1. Low profile and space saving 2. For surface mounted applications 3. RoHS compliant 4. Reliable low cost construction utilizing molded plastic technique 5. Glass passivated chip 6. Both bi-directional
More information30KP SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A =25 C unless otherwise specified
3KP SERIES 3W TRANSIENT VOLTAGE SUPPRESSOR Pb Features Glass Passivated Die Construction 3W Peak Pulse Power Dissipation 8V 88V Standoff Voltage A B A Uni- and Versions Available Excellent Clamping Voltage
More informationCDDFN N - TVS/Steering Diode Array
*RoHS COMPLIANT Features Low capacitance -.3 pf ESD protection Vcc + six I/O s RoHS compliant* Applications USB 3. HDMI. High speed port protection Portable electronics CDDFN-N - TVS/Steering Diode Array
More informationGreen. Bottom View. Top View. Part Number Qualification Case Packaging SMCJXX(C)AQ-13-F* Automotive SMC 3000/Tape & Reel
Green J14()AQ J36()AQ 1,500W SURFAE MOUNT AUTOMOTIVE TRANSIENT VOLTAGE SUPPRESSOR Product Summary (@T A = +25 ) P PK I FSM (A) V RWM (V) PM (AV) 1500W 200 14-36 5W Features and Benefits 1500W Peak Pulse
More informationTransient Voltage Suppression Diodes: SMCJ Series SMD Type 1500 W
Features 1. For surface mounted applications 2. RoHS compliant and halogen-free 3. Reliable low cost construction utilizing molded plastic technique 4. Glass passivated chip junction 5. Both bi-directional
More informationP6SMB Transient Voltage Suppressor Diode Series
P6SMB Transient Voltage Suppressor Diode Series General Information The P6SMB series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping
More informationP4KE SERIES Taiwan Semiconductor
400W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 400W surge capability at 10 / 1000 μs waveform - Fast response time: Typically less than
More informationVOLTAGE RANGE 200 Volts CURRENT 8.0 Amperes C J. C Storage Temperature Range
SR82P SHOTTKY BARRIER RETIFIER VOLTAGE RANGE 2 Volts URRENT 8. Amperes FEATURES * Low switching noise * Low forward voltage drop * Low thermal resistance * High current capability * High surge capabitity
More informationFAIRCHILD TVS Is Now Part of
FAIRCHILD TVS Is Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in
More informationTransient Voltage Suppression Diodes: P6SMB Series SMD Type 600 W
Features 1. For surface mounted applications 2. RoHS compliant and halogen-free 3. Reliable low cost construction utilizing molded plastic technique 4. Glass passivated chip junction 5. Both bi-directional
More informationSA SERIES Taiwan Semiconductor
500W, 5V - 170V Transient Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE DEVICES FOR BIPOLAR APPLICATIONS
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE TVS SMBJ SERIES FEATURES * Peak pulse power:600 W (/00 μs),4 kw (8/20 μs) * Plastic package has underwriters laboratory
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Features Glass passivated junction. 10 W Peak Pulse Power capability on
More informationJIEJIE MICROELECTRONICS CO., Ltd
JIJI MICROLCTRONICS CO., Ltd SMCJ Series 1500W Transient Voltage Suppressor Rev.4 DSCRIPTION: TVS diodes can be used in a wide range of applications which like consumer electronic products, automotive
More information1500W, 5V - 170V Surface Mount Transient Voltage Suppressor
1500W, 5V - 170V Surface Mount Transient Voltage Suppressor FEATURES Low profile package Ideal for automated placement Glass passivated junction Built-in strain relief Excellent clamping capability Fast
More information500W Glass Passivated Junction Transient Voltage Suppressor. JEDEC DO-15 molded plastic body over passivated junction
Glass Passivated Junction Transient Voltage Suppressor SA5.0A -SA180CA 500W Glass Passivated Junction Transient Voltage Suppressor Features Stand-off voltage from 5.0 to 180 volts Glass passivated junction
More informationP6KE SERIES Taiwan Semiconductor
600W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps
More informationSZSMF5.0AT1G Series. TVS Diodes. Surface Mount > 200W > SZSMF5.0AT1G Series. Bi-directional. Cathode. Anode. Uni-directional.
Surface Mount > 2W > SZSMF5.ATG Series SZSMF5.ATG Series Pb Description The SZSMF5.ATG Series is designed to protect voltage sensitive components from high voltage, high energy transients. Excellent clamping
More informationPAM31DOAB Series 1500 WATT TVS COMPONENT APPLICATIONS DO-214AB PACKAGE MECHANICAL CHARACTERISTICS FEATURES PIN CONFIGURATIONS.
15 WATT TVS COMPONENT APPLICATIONS Automotive DO-214AB PACKAGE FEATURES AEC-Q11 Qualified UL File Recognition #E28219 Compatible with IEC 6-4-2 (ESD): Level 4 - Air 15kV, Contact 8kV Compatible with IEC
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More information1.5KE SERIES 1500 WATT TVS COMPONENT DESCRIPTION AXIAL LEAD PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS
1500 WATT TVS COMPONENT DESCRIPTION The 1.5KE Series, are discrete 15,00 Watt, silicon transient voltage suppressors (TVS) designed for use in applications where large voltage transients can permanently
More informationSZ1SMC5.0AT3G Series. TVS Diodes. Surface Mount > 1500W > SZ1SMC5.0AT3G Series. Cathode. Anode. Uni-directional. Description
SZ1SMC5.0AT3G Series Pb Description The SZ1SMC5.0AT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high
More information1500 Watt Low Clamping Factor Transient Voltage Suppressor
1N6358 1N637 or Available 1500 Watt Low Clamping Factor Transient Voltage Suppressor DESCRIPTION This Transient Voltage Suppressor (TVS) series for 1N6358 through 1N637 are JEDEC registered selections
More informationPAM28DOAC Series 400 WATT TVS COMPONENT APPLICATIONS DO-214AC PACKAGE MECHANICAL CHARACTERISTICS FEATURES PIN CONFIGURATIONS. Automotive Applications
4 WATT TVS COMPONENT APPLICATIONS Automotive Applications DO-214AC PACKAGE FEATURES AEC-Q11 Qualified ISO 7637-2 Pulse 1, 2a, 2b, 3a, 3b Compliant UL File Recognition #E28219 IEC 6-4-2 (ESD): Level 4 -
More informationSMS Volt TVS Array For ESD and Latch-Up Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Description The SMS series of TS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD, lightning, and other voltage-induced transient events. Each device will protect
More informationFAIRCHILD TVS Is Now Part of
FAIRCHILD TVS Is Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in
More information30KP Series 30000W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR R-6 PACKAGE WILLAS ELECTRONIC CORP. R-6 (Cathode band Only Uui-polarity product)
3W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR 3KP Series 1.(25.4)MIN..36(9.14).338(8.6) 1.(25.4)MIN. R-6 (Cathode band Only Uui-polarity product).52(1.32).47(1.2) Dimensions in inches and (millimeters) DIA..36(9.14).338(8.6)
More informationBZW04 SERIES Taiwan Semiconductor
W, 5.8V - 376V Transient Voltage Suppressor BZW4 SERIES FEATURES - Excellent clamping capability - Low impedance surge resistance - W surge capability at / μs waveform - Very fast response time - Typical
More information2 kw Surface Mount Transient Voltage Suppressor
Available 2 kw Surface Mount Transient Voltage Suppressor DESCRIPTION Screening in reference to MIL-PRF-190 available The MSMBG(J)2K3.0 MSMBG(J)2K5.0 series of surface mount 2.0 kilowatt transient voltage
More informationGreen. Part Number Qualification Case Packaging P4SMAJXXADF-13 Commercial D-FLAT 10,000/Tape & Reel
Green 400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Features Mechanical Data Packaged in the Low Profile D-FLAT to Optimize Board Space Case: D-FLAT Glass Passivated Die Construction Excellent Clamping
More informationDEVICES FOR BIPOLAR APPLICATIONS
SEMICONDUCTOR TECHNICAL SPECIFICATION GPP TRANSIENT VOLTAGE SUPPRESSOR 15 WATT PEAK POWER 5. WATTS STEADY STATE TVS 1.5KE SERIES FEATURES * Plastic package has underwriters laboratory certificate * Glass
More informationFAIRCHILD TVS Is Now Part of
FARCHLD TVS s Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in power
More informationICTE5 thru ICTE18C, 1N6373 thru 1N6386. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
TRANSZORB Transient Voltage Suppressors Case Style 1.5KE PRIMARY CHARACTERISTICS V WM 5. V to 18 V V BR (uni-directional) 6. V to 21.2 V V BR (bi-directional) 9.2 V to 21.2 V P PPM 1 W P D 6.5 W I FSM
More informationP6SMB11AT3G Series. TVS Diodes. Surface Mount > 600W > P6SMB11AT3G Series. Bi-directional. Cathode. Anode. Uni-directional.
P6SMB11AT3G Series Pb Description The P6SMB11AT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge
More informationP6SMB Series. TVS Diodes Surface Mount 600W > P6SMB series. Description. Uni-directional
RoHS Pb e3 Uni-directional Description Bi-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM. I 2 t 6.64 A 2 /Sec T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More informationSMF SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A=25 C unless otherwise specified WTE
WTE POWER SEMICONDUCTORS SMF SERIES 200W SURFACE MOUNT TRANSIENT SUPPRESSOR Pb Features Glass Passivated Die Construction 200W Peak Pulse Power Dissipation A 5.0V 90V Standoff Voltage Uni- and Bi-Directional
More information