5.0SMDJ Transient Voltage Suppressor Diode Series

Transcription

1 *RoHS OMPLINT eatures n RoHS compliant* and halogen free** n Surface mount SM package n Standoff voltage: 12 to 170 volts n Peak Pulse Power: 5000 watts n Typical temperature coefficient: V R = 0.1 % x 25 x T 5.0SMJ Transient Voltage Suppressor iode Series General Information Portable communications, computing and video equipment manufacturers are challenging the semiconductor industry to develop increasingly higher power density circuit protection components. ourns offers Transient Voltage Suppressor iodes for surge and ES protection applications, in compact chip package O-214 (SM) size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 12 V up to 170 V and reakdown Voltage up to 209 V. Typical fast response times are less than 1.0 ps from 0 V to reakdown Voltage. ourns hip iodes conform to JEE standards, are easy to handle with standard pick and place equipment and the flat configuration minimizes roll away. Electrical haracteristics (@ T = 25 Unless Otherwise Noted) Parameter Symbol Value Unit Minimum Peak Pulse Power issipation (T p = 1 ms) (Note 1,2) P PK 5000 Watts Peak orward Surge urrent 8.3 ms Single Half Sine Wave Superimposed on Rated Load I SM 300 mps (JEE Method) (Note 3,4) Steady State Power TL = 50 P M(V) 6.5 Watts Maximum Instantaneous orward I PP = (or Unidirectional Units Only) V 5 Volts Operating Temperature Range T J -55 to +150 Storage Temperature Range T STG -55 to Non-repetitive current pulse, per Pulse Waveform graph and derated above T = 25 per Pulse erating urve. 2. Thermal Resistance Junction to Lead ms Single Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). 4. Mounted on 8.0 mm x 8.0 mm copper pad area to each terminal. How to Order 5.0SMJ 12 - H sia-pacific: Tel: asiacus@bourns.com Europe: Tel: eurocus@bourns.com The mericas: Tel: americus@bourns.com Package 5.0SMJ = SM/O-214 Working Peak Reverse Voltage 12 = 12 V RWM (Volts) Suffix = 5 % Tolerance Unidirectional evice = 5 % Tolerance idirectional evice Reel (lank) = 13-inch Reel -H = 7-inch Reel * RoHS irective 2015/863, Mar 31, 2015 and nnex. **ourns considers a product to be halogen free if (a) the romine (r) content is 900 ppm or less; (b) the hlorine (l) content is 900 ppm or less; and (c) the total romine (r) and hlorine (l) content is 1500 ppm or less.

2 5.0SMJ Transient Voltage Suppressor iode Series Electrical haracteristics T = 25 Unless Otherwise Noted) Unidirectional evice idirectional evice reakdown Voltage V R (Volts) Reverse Standoff Voltage Maximum Reverse V RWM Maximum lamping I PP Peak Pulse urrent Part Part Part Part Min. I Number Marking Number Marking T (m) V RWM (V) I R (μ) V (V) I PP () 5.0SMJ12 5PEP 5.0SMJ12 5EP SMJ13 5PEQ 5.0SMJ13 5EQ SMJ14 5PER 5.0SMJ14 5ER SMJ15 5PES 5.0SMJ15 5ES SMJ16 5PET 5.0SMJ16 5ET SMJ17 5PEU 5.0SMJ17 5EU SMJ18 5PEV 5.0SMJ18 5EV SMJ20 5PEW 5.0SMJ20 5EW SMJ22 5PEX 5.0SMJ22 5EX SMJ24 5PEZ 5.0SMJ24 5EZ SMJ26 5PE 5.0SMJ26 5E SMJ28 5PG 5.0SMJ28 5G SMJ30 5PK 5.0SMJ30 5K SMJ33 5PM 5.0SMJ33 5M SMJ36 5PP 5.0SMJ36 5P SMJ40 5PR 5.0SMJ40 5R SMJ43 5PT 5.0SMJ43 5T SMJ45 5PV 5.0SMJ45 5V SMJ48 5PX 5.0SMJ48 5X SMJ51 5PZ SMJ54 5PGE SMJ58 5PGG SMJ60 5PGK SMJ64 5PGM SMJ70 5PGP SMJ75 5PGR SMJ78 5PGT SMJ85 5PGV SMJ90 5PGX SMJ 5PGZ SMJ110 5PHE SMJ120 5PHG SMJ130 5PHK SMJ150 5PHM SMJ160 5PHP SMJ170 5PHR

3 5.0SMJ Transient Voltage Suppressor iode Series Product imensions Recommended ootprint G THOE N (UNIIRETIONL EVIES ONLY) imension (Max.) (Min.) (Min.) SM (O-214) 4.69 (0.185) 3.07 (0.121) 1.53 (0.060) H E IMENSIONS: MM (INHES) imension E G H SM (O-214) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) Physical Specifications Encapsulation..Molded plastic per UL lass 94V-0 Polarity.. athode band indicates unidirectional device No cathode band indicates bidirectional device Environmental Specifications Moisture Sensitivity Level..1 ES lassification (HM)... 3 IMENSIONS: MM (INHES)

4 5.0SMJ Transient Voltage Suppressor iode Series Rating & haracteristic urves Pulse erating urve Peak Pulse erating in Percent of Peak Power or urrent x 0 Waveform as efined by R.E Junction Temperature ( ) Maximum Non-Repetitive Surge urrent 300 Peak orward Surge urrent (mps) at 1 cycle 50 at 80 cycles Number of ycles at 60 Hz Pulse Waveform I P, Peak Pulse urrent (%) 50 TR=10 µs T=25 TP Peak value (IRSM) Half value= IRSM 2 Pulse width (TP) is defined as that point where the peak current decays to 50 % of IPSM Pulse Rating urve T, Time (ms) 10 x 0 waveform as defined by R.E.. Typical Junction apacitance J - Junction apacitance (p) T J = 25 f = 1.0 MHz V sig = 50 mvp-p V R V R - Reverse reakdown Voltage (V) Steady State Power erating urve idirectional v=0v Unidirectional v=0v V R P PPM - Peak Pulse Power (kw) T = x 8.0 mm (0.31 x 0.31 in.) 0.1 opper Pad reas 0.1 µs 1.0 µs 10 µs µs 1.0 ms 10 ms P M(V) Steady State Power issipation (W) Hz Resistive or Inductive Load TL, Lead Temperature ( ) t d - Pulse Width (sec.)

5 N5-0504N 5.0SMJ Transient - TVS/Steering Voltage Suppressor iode iode rray Series Packaging Information The product will be dispensed in tape and reel format (see diagram below). P 0 P 1 d Index Hole E T 120 W 2 1 P Trailer evice Leader End 10 pitches (min.) 10 pitches (min.) Start IMENSIONS: MM (INHES) W 1 irection of eed evices are packed in accordance with EI standard EI-481- and specifications shown here. Item Symbol SM (O-214) 7-Inch Reel 13-Inch Reel arrier Width 6.0 ± 0.20 (0.236 ± 0.079) arrier Length 8.3 ± 0.20 (0.327 ± 0.008) arrier epth 2.5 ± 0.20 (0.098 ± 0.008) Sprocket Hole d 1.50 ± 0.10 (0.059 ± 0.004) Reel Outside iameter (7.008) (12.992) 50.0 Reel Inner iameter 1 (1.969) MIN /-0.20 eed Hole iameter 2 ( /-0.008) Sprocket Hole Position E 1.75 ± 0.10 (0.069 ± 0.004) Punch Hole Position 7.50 ± 0.10 (0.295 ± 0.004) Punch Hole Pitch P 8.00 ± 0.10 (0.315 ± 0.004) 4.00 ± 0.10 Sprocket Hole Pitch P 0 (0.157 ± 0.004) 2.00 ± 0.10 Embossment enter P 1 (0.079 ± 0.004) Overall Tape Thickness T 0.30± 0.10 (0.012 ± 0.004) Tape Width W ± 0.30 (0.630 ± 0.012) 22.4 Reel Width W 1 (0.882) MX. Quantity per Reel ,000 09/17

6 Legal isclaimer Notice This legal disclaimer applies to purchasers and users of ourns products manufactured by or on behalf of ourns, Inc. and its affiliates (collectively, ourns ). Unless otherwise expressly indicated in writing, ourns products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information before placing orders and should verify that such information is current and complete. The characteristics and parameters of a ourns product set forth in its data sheet are based on laboratory conditions and statements regarding the suitability of products for certain types of applications are based on ourns knowledge of typical requirements in generic applications. The characteristics and parameters of a ourns product in a user application may vary from the data sheet characteristics and parameters due to a combination of the ourns product with other components in the user s application or due to the environment of the user application itself. Such characteristics and parameters also can and do vary in different applications and actual performance may vary over time. Users should always verify actual performance of the ourns product in their specific devices and applications, and make their own independent judgments about how much additional test margin to design in to compensate for differences between laboratory and real world conditions. Unless ourns has explicitly designated an individual ourns product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), ourns is not responsible for any failure of an individual ourns product to meet such industry standard requirements or particular qualification. Users of ourns products are responsible for ensuring compliance with safety-related requirements and standards applicable to their applications. ourns products are not recommended, authorized or intended for use in nuclear, military, lifesaving, life-critical or life sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized ourns representatives on a case-by-case basis, use of any ourns products in such unauthorized applications is at the user s sole risk. Life-critical applications include devices identified by the U.S. ood and rug dministration as lass III devices and generally equivalent classifications outside of the United States. ourns standard products that are designed and tested for use in automotive applications will be described on the applicable data sheets as compliant with the applicable E-Q standard. Use of any other ourns standard products in an automotive application is not recommended, authorized or intended and will be at the user s sole risk. ourns standard products are not tested to comply with the United States ederal viation dministration or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. ourns standard products that are designed and tested for use in aircraft or space applications will be described on the applicable data sheets as compliant with the RT O-160 standard. Use of any other ourns standard product in an aircraft or space application is not recommended, authorized or intended and will be at the user s sole risk. The use and level of testing applicable to ourns custom products shall be negotiated on a case-by-case basis by ourns and the user for which such ourns custom products are specially designed. bsent a written agreement between ourns and the user regarding the use and level of testing, the provisions above applicable to ourns standard products shall also apply to such ourns custom products. Users shall not sell, transfer, export or re-export any ourns products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor use ourns products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. urther, ourns products, technology or technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes and ourns products may not, without prior authorization from ourns and/or the U.S. Government, be resold, transferred, or re-exported to any party that is ineligible to receive U.S. commodities, software, or technical data. To the maximum extent permitted by applicable law, ourns disclaims (i) any and all liability arising out of the application or use of any ourns standard product, (ii) any and all liability, including, without limitation, special, punitive, consequential or incidental damages, and (iii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability /17