P4SMA Transient Voltage Suppressor Diode Series
|
|
- Dominic Cross
- 6 years ago
- Views:
Transcription
1 *RoHS OMPLINT eatures n RoHS compliant* and halogen free** n Surface Mount SM package n reakdown Voltage: 6.8 to 55 volts n Peak Pulse Power: 4 watts n Typical temperature coefficient: V R =.1 % x V 25 x T pplications n I S (Min. Level 4) n I T n I Surge P4SM Transient Voltage Suppressor iode Series General Information The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly smaller electronic components. ourns offers Transient Voltage Suppressor iodes for surge and S protection applications, in compact chip package O-214 (SM) size format. The Transient Voltage Suppressor series offers a choice of reakdown Voltages from 6.8 V up to 55 V. Typical fast response times are less than 1. picosecond for unidirectional devices and less than 5. picoseconds for bidirectional devices. ourns hip iodes conform to J standards, are easy to handle with standard pick and place equipment and the flat configuration minimizes roll away. Maximum Ratings (@ T = 25 Unless Otherwise Noted) Parameter Symbol Value Unit Peak Pulse Power issipation (T P = 1 ms) (Note 1,2) P PK 4 Watts Peak orward Surge urrent 8.3 ms Single Half Sine Wave Superimposed on Rated Load I SM 4 mps (J Method) (Note 3) Instantaneous orward 25 (or Unidirectional Units Only) P4SM6.8 ~ P4SM2 P4SM22 ~ P4SM55 V Operating Temperature Range T J -55 to +15 Storage Temperature Range T STG -55 to Non-repetitive current pulse, per Pulse Waveform graph and derated above T = 25 per Pulse erating urve. 2. Mounted on 5. mm x 5. mm copper pad to each terminal ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). Volts How to Order P4SM 6.8 sia-pacific: Tel: ax: M: Tel: ax: The mericas: Tel: ax: Series P4SM = SM/O-214 reakdown Voltage 6.8 to 55 = 6.8 to 55 V (Volts) Suffix = 5 % Tolerance Unidirectional evice = 5 % Tolerance idirectional evice * RoHS irective 22/95/ Jan. 27, 23 including annex and RoHS Recast 211/65/U June 8, 211. **ourns considers a product to be halogen free if (a) the romine (r) content is 9 ppm or less; (b) the hlorine (l) content is 9 ppm or less; and (c) the total romine (r) and hlorine (l) content is 15 ppm or less.
2 P4SM Transient Voltage Suppressor iode Series lectrical haracteristics T = 25 Unless Otherwise Noted) Working Maximum Maximum Maximum Unidirectional evice idirectional evice reakdown Voltage V R (Volts) Peak Leakage Voltage Surge V I RSM urrent Part No. Marking Part No. Marking Min. I T (m) V RWM (V) I R (μ) V RSM (V) I RSM () P4SM6.8 6V8 P4SM6.8 6V P4SM7.5 7V5 P4SM7.5 7V P4SM8.2 8V2 P4SM8.2 8V P4SM9.1 9V1 P4SM9.1 9V P4SM1 1 P4SM P4SM11 11 P4SM P4SM12 12 P4SM P4SM13 13 P4SM P4SM15 15 P4SM P4SM16 16 P4SM P4SM18 18 P4SM P4SM2 2 P4SM P4SM22 22 P4SM P4SM24 24 P4SM P4SM27 27 P4SM P4SM3 3 P4SM P4SM33 33 P4SM P4SM36 36 P4SM P4SM39 39 P4SM P4SM43 43 P4SM P4SM47 47 P4SM P4SM51 51 P4SM P4SM56 56 P4SM P4SM62 62 P4SM P4SM68 68 P4SM P4SM75 75 P4SM P4SM82 82 P4SM P4SM91 91 P4SM P4SM1 1 P4SM P4SM11 11 P4SM P4SM12 12 P4SM P4SM13 13 P4SM P4SM15 15 P4SM P4SM16 16 P4SM P4SM17 17 P4SM P4SM18 18 P4SM P4SM2 2 P4SM P4SM22 22 P4SM P4SM25 25 P4SM P4SM3 3 P4SM P4SM35 35 P4SM P4SM4 4 P4SM P4SM44 44 P4SM P4SM48 48 P4SM P4SM51 51 P4SM P4SM53 53 P4SM P4SM54 54 P4SM P4SM55 55 P4SM Notes: 1. Suffix denotes a 5 % tolerance unidirectional device. 2. Suffix denotes a 5 % tolerance bidirectional device. 3. or bidirectional devices with a V R of 1 volts or less, the I R limit is double.
3 3312 P4SM - 2 Transient mm SM Voltage Trimming Suppressor Potentiometer iode Series Rating & haracteristic urves Pulse erating urve 1 1 Peak Pulse erating in Percent of Peak Power or urrent Peak Pulse erating in Percent of Peak Power or urrent Pulse Waveform mbient 1Temperature ( ) mbient Temperature ( ) Maximum Non-Repetitive Surge urrent Peak orward Surge urrent (mps) Peak orward Surge urrent (mps) Pulse Width 8.3 ms 1 Pulse Single Width Half 8.3 Sine-Wave ms 1 Single Half Sine-Wave Number 1of ycles 2 at 6 Hz 5 1 Number of ycles at 6 Hz Typical Junction apacitance I PPM - Peak Pulse urrent, % I RSM 15 I PPM - Peak Pulse urrent, % I RSM Pulse Rating urve T t r = 1 µsec. J = 25 T t r = 1 µsec. J = 25 Pulse Width (td) is defined Pulse Width (td) is defined Peak Value as the point where the Peak Value as the point where the I peak current decays to PPM I peak current decays to PPM 5 % of I 5 PPM % of I PPM Half Value- IPPM Half Value- IPPM 2 2 1/1 µsec. Waveform 1/1 µsec. Waveform as defined by R... as defined by R... t d t d t - Time t -(ms) Time (ms) J (p) J - Junction apacitance (p) 1 idirectional V V = = VV 1 Unidirectional V V = = VV TT J J = = f f = = MHz Vsig = = 5 5 mvp-p V R -- reakdown Voltage (V) Steady State Power erating urve 1. P P, Peak Power (KW) P P, Peak Power (KW) T = T 25 = 25 Non-repetitive Pulse Pulse Waveform Shown Shown in Pulse in Pulse Waveform Graph Graph µs µs µs µs 1 µs 1 µs 1 1 µs µs ms ms 1 ms 1 ms TP, TP, Pulse Pulse Width Width RM(V) Steady State Power issipation (W) Hz Resistive or Inductive Load TL, Lead Temperature ( )
4 P4SM 3312 Transient - 2 mm SM Voltage Trimming Suppressor Potentiometer iode Series Product imensions Recommended ootprint THO N (OR UNIIRTIONL PROUTS ONLY) G imension G SM (O-214) ( ) ( ) ( ) ( ) (.2 -.8) ( ) (.3 -.6) imension a (Max.) b (Min.) c (Min.) Physical Specifications IMNSIONS: SM (O-214) 2.7 (.16) 2.1 (.83) 1.27 (.5) (INHS) ase..molded plastic per UL lass 94V- Polarity.. athode band indicates unidirectional device No cathode band indicates bidirectional device nvironmental Specifications Moisture Sensitivity Level..1 S lassification (HM)... 3 IMNSIONS: (INHS)
5 N5-54N P4SM Transient - TVS/Steering Voltage Suppressor iode rray iode Series Packaging Information The product will be dispensed in tape and reel format (see diagram below). P P 1 d Index Hole T 12 W 2 1 P Trailer evice Leader nd 1 pitches (min.) 1 pitches (min.) Start IMNSIONS: (INHS) W 1 irection of eed evices are packed in accordance with I 481 standard specifications shown here. Item Symbol SM (O-214) arrier Width 2.9 ±.1 (.114 ±.4) arrier Length 5.59 ±.1 (.22 ±.4) arrier epth 2.36 ±.1 (.93 ±.4) Sprocket Hole d 1.55 ±.5 (.61 ±.2) Reel Outside iameter 33 (12.992) 1. Reel Inner iameter 1 (3.937) MIN. 13. ±.2 eed Hole iameter 2 (.512 ±.8) Sprocket Hole Position 1.75 ±.1 (.69 ±.4) Punch Hole Position 5.5 ±.5 (.217 ±.2) Punch Hole Pitch P 4. ±.1 (.157 ±.4) 4. ±.1 Sprocket Hole Pitch P (.157 ±.4) 2. ±.5 mbossment enter P 1 (.79 ±.2) Overall Tape Thickness T.3 ±.1 (.12 ±.4) Tape Width W 12. ±.2 (.472 ±.8) 17. Reel Width W 1 (.669) MX. Quantity per Reel -- 5, RV. 7/17
1.5SMC Transient Voltage Suppressor Diode Series
*RoHS OMPLINT & **HLOGN R eatures n RoHS compliant* and halogen free** n Surface Mount SM package n reakdown oltage: 6.8 to 55 volts n Peak Pulse Power: 5 watts n Typical temperature coefficient: R =.
More informationSMBJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n RoHS compliant* n Surface Mount SM package n Standoff Voltage: 5 to 495 volts n Power issipation: 6 watts pplications n I 6-4-2 S (Min. Level 4) n I 6-4-4 T n I 6-4-5 Surge SMJ
More informationSMBJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5 to 495 volts Power issipation: 6 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More information5.0SMDJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n RoHS compliant* and halogen free** n Surface mount SM package n Standoff voltage: 5 to 7 volts n Peak Pulse Power: 5 watts n Typical temperature coefficient: V R =. % x VR @ 25
More informationSMCJ-Q Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n Surface Mount SM package n Standoff Voltage: 2 to 58 volts n Power issipation: 5 watts n RoHS compliant* n -Q compliant** pplications n Protection of power buses n Protection of
More informationSMBJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 6 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More informationSMCJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 15 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More informationSMCJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 495 volts Power issipation: 15 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More informationSMBJ-Q Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n Surface Mount SM package n Standoff Voltage: 12 to 58 volts n Power issipation: 6 watts n RoHS compliant* n -Q11 compliant** pplications n Protection of power buses n Protection
More informationCD214B Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures Lead free RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 6 watts Model 214 is currently available, although not recommended for new designs.
More informationCD214C Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures Lead free RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 15 watts Model 214 is currently available, although not recommended for new designs.
More informationSMLJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 3 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMLJ Transient Voltage
More informationSMLJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 3 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMLJ Transient Voltage
More informationSMAJ-Q Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n Surface Mount SM package n Standoff Voltage: 12 to 58 volts n Power issipation: 4 watts n RoHS compliant* n -Q1 compliant** pplications n Protection of power buses n Protection
More informationCD214L Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 3 watts Model 214L is currently available, although not recommended for new designs. Model
More informationSMAJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 495 volts Power issipation: 4 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More informationParameter Symbol Value Unit
*RoHS OMPLINT VRSIONS VILL eatures Lead free versions available RoHS compliant (lead free version)* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 6 watts 214 Transient Voltage
More informationSMAJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 495 volts Power issipation: 4 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More informationCD214A-B120 ~ B1100 Schottky Barrier Rectifier Chip Diode
*RoHS OMPLINT eatures n RoHS compliant* n SM package n Surface mount n Very low forward voltage drop This series is currently available but not recommended for new designs. The Model 24-xR Series is the
More informationCD214A-B220 ~ B260 Schottky Barrier Rectifier Chip Diode
*RoHS OMPLINT eatures n RoHS compliant* n SM package n Surface mount n Very low forward voltage drop This series is currently available but not recommended for new designs. The Model 24-2xR Series is the
More informationCD214A-B3xR Series Schottky Barrier Rectifier Chip Diode
*RoHS OMPLINT eatures n RoHS compliant* n Low profile n Low power loss, high efficiency n UL 94V-0 classification pplications n Switch Mode Power Supplies n Portable equipment batteries n High frequency
More informationCD-HD2x(L) Series Surface Mount Schottky Bridge Rectifier Diode
*RoHS OMPLINT eatures n RoHS compliant* n Low power loss and high efficiency n High current capability n Low profile package pplications n operated products n omputer monitors n Set-top boxes n able modems
More informationCDNBS08-SLVU Low Capacitance TVS Array
*RoHS OMPLINT eatures RoHS compliant* Protects up to four I/O ports Surge protection S protection Low capacitance: 6 p pplications thernet - 1/1 ase T Personal digital assistants LN devices Instrumentation
More informationCD0603-B0xR Schottky Barrier Chip Diode Series
*RoHS OMPLINT & **HLOGN R eatures n RoHS compliant* n Leadless chip form n High current capability n Low forward voltage n Halogen free** pplications n Switch Mode Power Supplies (SMPS) n Portable equipment
More informationCD123D-B1xR Schottky Barrier Chip Diode Series
*RoHS OMPLINT & **HLOGN R eatures n RoHS compliant* n Leadless chip form n High current capability n Low forward voltage n Halogen free** pplications n Switch Mode Power Supplies (SMPS) n Portable equipment
More informationCD214A-B220 ~ B260 Schottky Barrier Rectifier Chip Diode
Features SM package Surface mount Very low forward voltage drop General Information The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop
More information5.0SMDJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n RoHS compliant* and halogen free** n Surface mount SM package n Standoff voltage: 12 to 170 volts n Peak Pulse Power: 5000 watts n Typical temperature coefficient: V R = 0.1 % x
More informationCDSOT23-T24CAN CANbus Protector
*RoHS OMPLINT 2801L eatures n Single device for two I/O lines n Low capacitance for high-speed Nbus n I 61000-4-2 30 kv S n I 61000-4-5 (Level 1, WG 1.2/50) 500 V Surge n RoHS compliant* pplications n
More informationCDSOT23-T24CAN-Q CANbus Protector
*RoHS & OMPLINT eatures n Single device for two I/O lines n Low capacitance for high-speed Nbus n I 61000-4-2 30 kv S n I 61000-4-5 (Level 1, WG 1.2/50) 500 V Surge n RoHS compliant* n -Q101 compliant**
More informationCDDFN N - Surface Mount TVS Diode Array
*RoHS OMPLINT eatures n I -- (S) ±3 kv (ir/ontact) I -- (Lightning) (/ μs) n S protection to I -- (Level ) n RoHS compliant* pplications n WN/LN devices n // thernet N-7N - Surface Mount TVS iode rray
More informationCDSOD323-TxxC-DSL - TVS Diode Series
*RoHS OMPLINT & **HLOGN R eatures n Protects one line or one I/O port n idirectional configuration n S protection 30 max. n Low capacitance ~ 3 p typ. n Replaces 0805 MLV devices n RoHS compliant* n Halogen
More informationSolution 1 TVS Diode Array: CDSOT C 2 Bridge Rectifiers: CDNBS04-B TVS Diode: SMBJ58A 1 Transformer: SM51108EL
Solution Products SOT236-0504 NS04-08200 Ethernet 10/100 ase-t Power over Ethernet (PoE) P Unit Protection Objective 10/100 ase-t Power over Ethernet (PoE) interfaces combine data and 48 V to provide remote
More informationCDSOD323-TxxLC - TVS Diode Series
**RoHS OMPLINT eatures n Lead free as standard* n S protection 30 k max. n Low capacitance ~.0 p n Protects line n Uni/bidirectional configuration pplications n HMI.4 n igital isual Interface (I) n US
More informationLead free RoHS compliant* Low profile package Surface mount Very low forward voltage drop
*RoHS OMPLINT eatures Lead free RoHS compliant* Low profile package Surface mount Very low forward voltage drop This series is currently available, but not recommended for new designs. The Model 23- Series
More informationCDSOD323-TxxC - TVS Diode Array Series
*RoS OMPLINT eatures n RoS compliant* n Protects one line or one I/O port n idirectional configuration n S protection 30 k max. n Low capacitance: ~3 p typical n Replaces 0805 ML devices pplications n
More informationCD-MBL1xxS Surface Mount Bridge Rectifier Diode
eatures n RoHS compliant* n Low power loss and high efficiency n High current capability n Low profile package pplications n operated products n omputer monitors n Set-top boxes n able modems General Information
More informationSMF4L Transient Voltage Suppressor Diode Series
L V 8 8 Features n Surface Mount SO-23FL package n Standoff Voltage: 2 to 58 volts n Power issipation: 4 watts n RoHS compliant* pplications n Protection of power buses n Protection of /O interfaces n
More informationSM8S-Q Transient Voltage Suppressor Diode Series
*RoHS & **AEC-Q COMPLIANT 23 Features n Maximum Peak Power Dissipation: 66 watts n Meets ISO7637-2 / ISO675-2 Surge specification (varies by test condition) n RoHS compliant* n AEC-Q compliant** Applications
More informationCDSOT23-SR208 Steering Diode Array
*RoHS COMPLIANT A381L Features n Lead free device n RoHS compliant* n Protects four lines n ES and EFT protection n Low capacitance:
More informationBOURNS CD214A-F150-F1600 Rectifier Datasheet
BOURNS CD214A-F150-F1600 Rectifier Datasheet http://www.manuallib.com/bourns/cd214a-f150-f1600-rectifier-datasheet.html The markets of portable communications, computing and video equipment are challenging
More informationTV06B5V0-HF Thru. TV06B441-HF
TV65V-HF Thru. TV644-HF Working Peak voltage: 5. to 44Volts Power Dissipation: 6 Watts RoHS Device Halogen Free Features -Glass passivated chip. -6W peak pulse power capability with a /μs -waveform, repetitive
More informationATV66SM836A-G. SMD Transient Voltage Suppressor. Working Voltage: 36 Volts Peak Pulse Power: 6600 Watts RoHS Device. Features.
orking Voltage: 36 Volts Peak Pulse Power: 66 atts RoHS Device eatures -Glass passivated chip. -66 peak pulse power capability with a 1/µs waveform, repetitive rate (duty cycle):.1% -Meets ISO7637-2 5a
More informationTV04A5V0-HF Thru. TV04A441-HF
TV45V-HF Thru. TV444-HF Working Peak : 5. to 44 Volts Power Dissipation: 4 Watts RoHS Device Halogen Free Features - Glass passivated chip. - 4W peak pulse power capability with a / µs waveform, repetitive
More informationATV02W5V0-HF Thru ATV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free
TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capability
More informationTV02W5V0-HF Thru TV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free
TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capility
More informationTV02W5V0-G Thru. TV02W191-G Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device
TV2W5V-G Thru. TV2W9-G Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capility with a /us waveform,repetitive
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More informationSurface Mount Transient Voltage Suppressors (TVS)
Description The 1.5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional
More informationATV02W5V0-HF Thru ATV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free
TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capability
More informationDATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY 1.0SMB series
Product specification November 5, 28 V. DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY.SMB series RoHS compliant & Halogen free Transient Suppressors.SMB 2 Transient Suppressors (TVS) Data
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE DEVICES FOR BIPOLAR APPLICATIONS
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE TVS SMBJ SERIES FEATURES * Peak pulse power:600 W (/00 μs),4 kw (8/20 μs) * Plastic package has underwriters laboratory
More informationTransient Voltage Suppression Diodes: P6SMB Series SMD Type 600 W
Features 1. For surface mounted applications 2. RoHS compliant and halogen-free 3. Reliable low cost construction utilizing molded plastic technique 4. Glass passivated chip junction 5. Both bi-directional
More informationFAIRCHILD TVS Is Now Part of
FAIRCHILD TVS Is Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM. I 2 t 6.64 A 2 /Sec T J, T STG
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4
More informationP4KE SERIES Taiwan Semiconductor
400W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 400W surge capability at 10 / 1000 μs waveform - Fast response time: Typically less than
More information30KP Series 30000W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR R-6 PACKAGE WILLAS ELECTRONIC CORP. R-6 (Cathode band Only Uui-polarity product)
3W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR 3KP Series 1.(25.4)MIN..36(9.14).338(8.6) 1.(25.4)MIN. R-6 (Cathode band Only Uui-polarity product).52(1.32).47(1.2) Dimensions in inches and (millimeters) DIA..36(9.14).338(8.6)
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
More informationSA SERIES Taiwan Semiconductor
500W, 5V - 170V Transient Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from
More informationCDDFN N - TVS/Steering Diode Array
*RoHS COMPLIANT Features Low capacitance -.3 pf ESD protection Vcc + six I/O s RoHS compliant* Applications USB 3. HDMI. High speed port protection Portable electronics CDDFN-N - TVS/Steering Diode Array
More informationBZW04 SERIES Taiwan Semiconductor
W, 5.8V - 376V Transient Voltage Suppressor BZW4 SERIES FEATURES - Excellent clamping capability - Low impedance surge resistance - W surge capability at / μs waveform - Very fast response time - Typical
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features Glass passivated junction Low zener impedance Excellent clamping capability 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty
More informationFAIRCHILD TVS Is Now Part of
FAIRCHILD TVS Is Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. P6KE6V8(C)A - P6KE4(C)A 6W TRANSIENT VOLTAGE SUPPRESSOR Features 6W Peak Pulse
More informationM C C. SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A. Features. Transient Voltage Suppressor 6.8 to 550 Volts 1500 Watt.
omponents 20736 Marilla Street Chatsworth!"# $%!"# SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A Features For surface mount applicationsin in order tooptimize board space Lead Free Finish/Rohs Compliant (Note1)
More informationP6KE SERIES Taiwan Semiconductor
600W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps
More informationComchip 3KP-G Transient Voltage Suppressor Datasheet
Comchip 3KP-G Transient Suppressor Datasheet http://www.manuallib.com/comchip/3kp-g-transient-voltage-suppressor-datasheet.html Features -Glass passivated chip. -Low leakage. -Uni and Bidirection unit.
More informationP6SMB Series. TVS Diodes Surface Mount 600W > P6SMB series. Description. Uni-directional
RoHS Pb e3 Uni-directional Description Bi-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationDEVICES FOR BIPOLAR APPLICATIONS
SEMICONDUCTOR TECHNICAL SPECIFICATION GPP TRANSIENT VOLTAGE SUPPRESSOR 15 WATT PEAK POWER 5. WATTS STEADY STATE TVS 1.5KE SERIES FEATURES * Plastic package has underwriters laboratory certificate * Glass
More informationMCC. P6KE6.8 THRU. Features. Maximum Ratings APPLICATION DO WATTS TRANSIENT VOLTAGE SUPPRESSOR 6.
Features Epoxy meets UL 94 V- flammability rating Moisture Sensitivity Level 1 omponents 2736 Marilla Street Chatsworth!"# $%!"# and suffix"c" designates bidirectional type Lead Free Finish/Rohs Compliant
More informationMCC. P6KE6.8 THRU P6KE540(C)A. Features. Maximum Ratings APPLICATION DO WATTS TRANSIENT VOLTAGE SUPPRESSOR 6.
Features omponents 2736 Marilla Street Chatsworth!"# $%!"# Economical series Available in both unidirectional and bidirectionalconstruction and suffix"c" designates bidirectional type Lead Free Finish/Rohs
More informationTransient Voltage Suppression Diodes Axial Leaded 600W > P6KE series
Axial Leaded 6W > P6KE series RoHS Pb Description The is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More information5KP-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 5000W > 5KP-HRA series. Description. Uni-directional
5KP-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals AGENCY FILE NUMBER E28662/E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 5 W
More information5KP Series. Transient Voltage Suppression Diodes. Axial Leaded 5 kw > 5KP series. Description
5KP Series RoHS Pb e3 Description Uni-directional The 5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationSLD Series. TVS Diodes. Axial Leaded 2200W > SLD series. Description
SLD Series RoHS Pb e3 Description AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Ratings and Thermal Characteristics (T A =25 O C unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power
More informationP4SMA-E Series. TVS Diodes Surface Mount 400W > P4SMA-E series Series. Description. Uni-directional
P4SMA-E Series RoHS Pb e3 Description The P4SMA-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationICTE5.0 THRU ICTE15C SERIES
ICTE5.0 THRU ICTE15C SERIES TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR Stand-off Voltage - 5.0 to 15 Volts Peak Pulse Power - Watts Case Style 1.5KE 1.00 (25.4) MIN. 0.205 (5.207) 0.190 (4.826) DIA. 0.375
More information30KPA-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 30000W > 30KPA-HRA series. Descriptios. Uni-directional
3KPA-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 3 W Steady State Power Dissipation
More informationSA5.0A thru SA170CA. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.0 V to 170 V V BR (uni-directional) 6.4 V to 209 V V BR (bi-directional) 6.4 V to 209 V P PPM 500 W P D 3.0 W I FSM
More informationGPP TRANSIENT VOLTAGE SUPPRESSOR 3000 WATT PEAK POWER 7.5 WATTS STEADY STATE SYMBOL. W Steady State Power Dissipation at T L = 75 O C P M(AV) I FSM
GPP TRANSIENT VOLTAGE SUPPRESSOR 3 WATT PEAK POWER 7.5 WATTS STEADY STATE TVS 3KPSMC SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction *3 watt surage capability
More informationP6SMB-E Series. TVS Diodes Surface Mount 600W > P6SMB-E series Series. Description. Uni-directional
P6SMB-E Series RoHS Pb e3 Description The P6SMB-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationTV15C5V0-G Thru. TV15C441-G
TV55V-G Thru. TV544-G Working Peak : 5. to 44 Volts Power Dissipation: 5Watts RoHS Device Features - Glass passivated chip. - 5W peak pulse power capability with a /µs waveform, repetitive rate (duty cycle):.%
More information15,000 Watt Transient Voltage Suppressor (TVS) Protection Device
M1KP22A M1KP280CA(e3) Available 1,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This Transient Voltage Suppressor series of M1KP22A M1KP280CA offers an extended voltage range
More information15,000 Watt Transient Voltage Suppressor (TVS) Protection Device
Compliant 15,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This device clamps dangerous high-voltage short-term transients such as those produced by the secondary effects of
More informationTP6KE Series. TVS Diodes Axial Leaded 600W > TP6KE series
TP6KE Series RoHS Pb e3 AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) 6 W Steady State Power Dissipation
More information15KPA Series. Transient Voltage Suppression Diodes. Axial Leaded 15000W > 15KPA series. Descriptions. Uni-directional
5KPA Series RoHS Pb e3 Descriptions Uni-directional The 5KPA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 1500 WATT PEAK POWER 6.5 WATTS STEADY STATE
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 15 WATT PEAK POWER 6.5 WATTS STEADY STATE TVS TFMCJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 15
More informationTransient Voltage Suppression Diodes Axial Leaded 5000W > TP5KP series. Features. Bi-directional 5000 W 8.0 W 400 A 3.5 V. -55 to 150 C.
TP5KP Series RoHS Pb e3 Description The TP5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationGreen. Bottom View. Top View. Part Number Qualification Case Packaging SMCJXX(C)AQ-13-F* Automotive SMC 3000/Tape & Reel
Green J14()AQ J36()AQ 1,500W SURFAE MOUNT AUTOMOTIVE TRANSIENT VOLTAGE SUPPRESSOR Product Summary (@T A = +25 ) P PK I FSM (A) V RWM (V) PM (AV) 1500W 200 14-36 5W Features and Benefits 1500W Peak Pulse
More informationGeneral Purpose Plastic Rectifier
General Purpose Plastic Rectifier N400 thru N4007 DO-4AL (DO-4) MAJOR RATINGS AND CHARACTERISTICS I F(AV).0 A V RRM V to 00 V I FSM (8.3 ms sine-wave) A I FSM (square wave t p = ms) 45 A V F. V I R 5.0
More information3KP Series. Transient Voltage Suppression Diodes. Axial Leaded 3000W > 3KP series. Description
3KP Series RoHS Pb e3 3/3/27 LFPCN2244 5KP Series Description Uni-directional The 3KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
More information30KP SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A =25 C unless otherwise specified
3KP SERIES 3W TRANSIENT VOLTAGE SUPPRESSOR Pb Features Glass Passivated Die Construction 3W Peak Pulse Power Dissipation 8V 88V Standoff Voltage A B A Uni- and Versions Available Excellent Clamping Voltage
More informationFAIRCHILD TVS Is Now Part of
FARCHLD TVS s Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in power
More informationTransient Voltage Suppression Diodes. Surface Mount 400W > P4SMA series. Features. less than 1μA when V BR. Applications. Additional Infomarion
P4SMA Series RoHS Pb e3 Uni-directional Bi-directional Description The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationP6SMB Series. Transient Voltage Suppression Diodes. Surface Mount 600W > P6SMB series. Description
P6SMB Series RoHS Pb e3 Description Uni-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More informationTransient Voltage Suppression Diodes Axial Leaded 1500W > TP1.5KE series. Features 1500 W 6.5 W 200 A 3.5 V. -55 to 150 C. -55 to 175 C 15 C/W 75 C/W
TP.5KE Series RoHS Pb e3 Description The TP.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationP6SMB Transient Voltage Suppressor Diode Series
P6SMB Transient Voltage Suppressor Diode Series General Information The P6SMB series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping
More informationATV15C5V0-G Thru. ATV15C441-G
TV55V-G Thru. TV544-G Working Peak : 5. to 44 Volts Power Dissipation: 5Watts RoHS Device Features - Glass passivated chip. - 5W peak pulse power capability with a /µs waveform, repetitive rate (duty cycle):.%
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM (uni-directional) 5.8 V to 459 V V WM (bi-directional) 5.8 V to 185 V V BR (uni-directional) 6.8 V to 540 V V BR (bi-directional)
More informationATV15C5V0-HF Thru. ATV15C441-HF Working Peak Reverse Voltage: 5.0 to 440 Volts Power Dissipation: 1500Watts RoHS Device Halogen Free
TV55V-HF Thru. TV544-HF Working Peak : 5. to 44 Volts Power Dissipation: 5Watts RoHS Device Halogen Free Features - Glass passivated chip. - 5W peak pulse power capability with a /µs waveform, repetitive
More informationPAM28DOAC Series 400 WATT TVS COMPONENT APPLICATIONS DO-214AC PACKAGE MECHANICAL CHARACTERISTICS FEATURES PIN CONFIGURATIONS. Automotive Applications
4 WATT TVS COMPONENT APPLICATIONS Automotive Applications DO-214AC PACKAGE FEATURES AEC-Q11 Qualified ISO 7637-2 Pulse 1, 2a, 2b, 3a, 3b Compliant UL File Recognition #E28219 IEC 6-4-2 (ESD): Level 4 -
More information