CDSOT23-T24CAN CANbus Protector

Size: px
Start display at page:

Download "CDSOT23-T24CAN CANbus Protector"

Transcription

1 *RoHS OMPLINT 2801L eatures n Single device for two I/O lines n Low capacitance for high-speed Nbus n I kv S n I (Level 1, WG 1.2/50) 500 V Surge n RoHS compliant* pplications n High-speed Nbus n Industrial control networks n Smart istribution Systems (SS) n evicenet n actory and process automation systems n Lift control systems SOT23-T24N Nbus Protector General Information The Model SOT23-T24N device is designed to provide S and surge protection for N transceivers, meeting I (S) and I (Surge) requirements. The dual TVS array protects both data lines, offers a Working Reverse Voltage of 24 V and a Minimum reakdown Voltage of 26.2 V and can be used with transceivers with internal circuitry for 24 V power supply miswiring. The low capacitance and low leakage current of the Model SOT23-T24N minimizes impact on signal integrity and is compatible with high-speed N. The SOT-23 packaged device conforms to J standards and will mount directly onto the industry standard SOT-23 footprint. Its compact size eases layout on compact P designs while ensuring compliance with stringent MI requirements bsolute Maximum Ratings (@ T = 25 Unless Otherwise Noted) Rating Symbol Value Unit Repetitive Peak Off-state Voltage V RM 24 V Non-Repetitive Peak Impulse urrent, 8/20 µs Waveform I PPSM 8 Non-Repetitive Peak Impulse urrent, 1.2/50 µs Waveform I PPSM 6 S (I ontact) 30 kv Junction Temperature T J -40 to +150 Storage Temperature T stg -55 to +150 lectrical haracteristics (@ T = 25 Unless Otherwise Noted) Parameter Test ondition Min. Typ. Max. Unit I Leakage urrent V = V RM 100 n V R reakdown Voltage I R = 1 m V V lamping Voltage I = 5 8/20 µs waveform 36 V V lamping voltage I = 8 8/20 µs waveform 40 V apacitance V = 0 V, f = 1 MHz V osc = 1 Vrms Line to GN (Pin 1-3 or Pin 2-3) Line to Line (Pin 1-2) 11 p sia-pacific: Tel: mail: asiacus@bourns.com M: Tel: mail: eurocus@bourns.com The mericas: Tel: mail: americus@bourns.com evicenet is a trademark of OV. *RoHS irective 2002/95/ Jan. 27, 2003 including annex and RoHS Recast 2011/65/U June 8, 2011.

2 SOT23-T24N mm SM Nbus Trimming Protector Potentiometer Rating & haracteristic urves 8/20 µs Pulse Waveform lamping Voltage vs. Peak Pulse urrent IPP Peak Pulse urrent (% of IPP) tt e t td = t IPP/2 Test Waveform Parameters tt = 8 µs td = 20 µs t Time (µs) I PP - Peak Pulse urrent () /20 µs Waveform V - lamping Voltage (V) Leakage urrent vs. Temperature 10 reakdown Voltage vs. Temperature I - Typical Leakage urrent (n) 1 V = 24 V Temperature ( ) V R - Typical reakdown Voltage (V) Temperature ( )

3 SOT23-T24N Nbus Protector pplication Information The Model SOT23-T24N dual TVS diode array is designed to protect a Nbus transceiver against surge events per I (Level 1), and also increase the resistibility against S events beyond I to as high as 30 kv. It is intended to be used with a transceiver that has internal protection against other faults such as 24 V power supply miswiring. The Model SOT23-T24N is designed with a minimum breakdown voltage of 26.2 V so that it will not conduct during a 24 V power cross event. The surge test setup below shows the differential input/output (I/O) of a typical transceiver, its termination network, being protected by the SOT23-T24N device. The 1.2/50 µs voltage, 8/20 μs current combination wave generator is connected to the circuit through two 80 ohm resistors and a coupling device (). This circuit was subjected to a 500 V (1.2/50) longitudinal surge (common mode) in both positive and negative polarities per I (Level 1). The oscilloscope traces in igures 1 and 2 show the clamp voltage with respect to ground for the N H and N L signal lines, as well as the total surge current output from the surge generator into the circuit, for each of these surges. The peak current on each line is ~ 5.5 (11 total/2 lines) when subjected to the 500 V (1.2/50) surge. The TVS diode clamps the voltage at the I/O of the transceiver within 37 V during the surge. Nbus Transceiver igure 1 - SOT23-T24N lamp Voltages for a +500 V Surge igure 2 - SOT23-T24N lamp Voltages for a -500 V Surge

4 SOT23-T24N Nbus Protector Layout onsiderations The figure below shows an example of how the Model SOT23-T24N can be connected on a two-sided P design. The device should be placed as close to the bus connector as possible with short traces to the signal lines. Since the connector pin spacing is generally much larger than the pin spacing of the transceiver, it is relatively easy to do this. standard 10 mil, 1 ounce copper trace is more than adequate to handle the peak current level from the 500 V surge discussed in the previous section. The ground pin of the device should be connected to the circuit board ground plane using a short trace and a via. If there is a ground plane on the signal side of the circuit board near where the diode array is placed, it should be connected directly to it. Typical Part Marking 2YWWL 2-IGIT PROUT O MNUTURING T O: Y = YR WW = WK L = LOT O nvironmental Specifications Moisture Sensitivity Level..1 S lassification (HM)... 3

5 3312 SOT23-T24N - 2 mm SM Nbus Trimming Protector Potentiometer Product imensions Recommended ootprint IMNSIONS = MILLIMTRS (INHS) S TIL G H GUG PLN TIL L STING PLN imensions I J 0 TO 8 K IMNSIONS = MILLIMTRS (INHS) ( ) 0.95 (0.037)... S imensions 0.95 (0.037) G ( ) ( ) 1.90 (0.075)... S ( ) ( ) 0.95 (0.037) 2.00 (0.079) 0.85 (0.033) 0.85 (0.033) H I ( ) 0.25 (0.010)... S How to Order SOT23 - T 24 N J K L ( ) ( ) ( ) ommon ode hip iode Package SOT23 = SOT-23-3L Package Model T = Transient Voltage Suppressor Working Reverse Voltage 24 = 24 V Suffix N = Nbus Protector

6 SOT23-T24N Nbus Protector Packaging Information The product is dispensed in tape and reel format (see diagram below). P 0 P 1 d Index Hole T 120 ϒ W 2 1 P Trailer evice Leader nd 10 pitches (min.) 10 pitches (min.) Start IMNSIONS: MM (INHS) W 1 irection of eed evices are packed in accordance with I standard RS Item Symbol SOT-23 arrier Width arrier Length arrier epth Sprocket Hole Reel Outside iameter d 2.25 ±0.10 ( ) 2.34 ±0.10 ( ) 1.22 ±0.10 ( ) 1.55 ±0.05 ( ) 178 (7.008) Reel Inner iameter (1.969) Min. eed Hole iameter ± 0.20 (0.512 ± 0.008) Sprocket Hole Position Punch Hole Position Punch Hole Pitch P 1.75 ± 0.10 (0.069 ± 0.004) 3.50 ± 0.05 (0.138 ± 0.002) 4.00 ±0.10 ( ) Sprocket Hole Pitch P ± 0.10 (0.157 ± 0.004) mbossment enter P ± 0.05 (0.079 ± 0.002) Overall Tape Thickness Tape Width T W 0.20 ± 0.10 (0.008 ± 0.004) 8.00 ±0.20 ( ) Reel Width W (0.567) Max. Quantity per Reel -- 3,000 RV. 01/18 The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.

CDSOT23-T24CAN-Q CANbus Protector

CDSOT23-T24CAN-Q CANbus Protector *RoHS & OMPLINT eatures n Single device for two I/O lines n Low capacitance for high-speed Nbus n I 61000-4-2 30 kv S n I 61000-4-5 (Level 1, WG 1.2/50) 500 V Surge n RoHS compliant* n -Q101 compliant**

More information

CD214A-B120 ~ B1100 Schottky Barrier Rectifier Chip Diode

CD214A-B120 ~ B1100 Schottky Barrier Rectifier Chip Diode *RoHS OMPLINT eatures n RoHS compliant* n SM package n Surface mount n Very low forward voltage drop This series is currently available but not recommended for new designs. The Model 24-xR Series is the

More information

CD214A-B220 ~ B260 Schottky Barrier Rectifier Chip Diode

CD214A-B220 ~ B260 Schottky Barrier Rectifier Chip Diode *RoHS OMPLINT eatures n RoHS compliant* n SM package n Surface mount n Very low forward voltage drop This series is currently available but not recommended for new designs. The Model 24-2xR Series is the

More information

CDDFN N - Surface Mount TVS Diode Array

CDDFN N - Surface Mount TVS Diode Array *RoHS OMPLINT eatures n I -- (S) ±3 kv (ir/ontact) I -- (Lightning) (/ μs) n S protection to I -- (Level ) n RoHS compliant* pplications n WN/LN devices n // thernet N-7N - Surface Mount TVS iode rray

More information

CD214A-B3xR Series Schottky Barrier Rectifier Chip Diode

CD214A-B3xR Series Schottky Barrier Rectifier Chip Diode *RoHS OMPLINT eatures n RoHS compliant* n Low profile n Low power loss, high efficiency n UL 94V-0 classification pplications n Switch Mode Power Supplies n Portable equipment batteries n High frequency

More information

CDNBS08-SLVU Low Capacitance TVS Array

CDNBS08-SLVU Low Capacitance TVS Array *RoHS OMPLINT eatures RoHS compliant* Protects up to four I/O ports Surge protection S protection Low capacitance: 6 p pplications thernet - 1/1 ase T Personal digital assistants LN devices Instrumentation

More information

P4SMA Transient Voltage Suppressor Diode Series

P4SMA Transient Voltage Suppressor Diode Series *RoHS OMPLINT eatures n RoHS compliant* and halogen free** n Surface Mount SM package n reakdown Voltage: 6.8 to 55 volts n Peak Pulse Power: 4 watts n Typical temperature coefficient: V R =.1 % x V R

More information

CD-HD2x(L) Series Surface Mount Schottky Bridge Rectifier Diode

CD-HD2x(L) Series Surface Mount Schottky Bridge Rectifier Diode *RoHS OMPLINT eatures n RoHS compliant* n Low power loss and high efficiency n High current capability n Low profile package pplications n operated products n omputer monitors n Set-top boxes n able modems

More information

SMCJ-Q Transient Voltage Suppressor Diode Series

SMCJ-Q Transient Voltage Suppressor Diode Series *RoHS OMPLINT eatures n Surface Mount SM package n Standoff Voltage: 2 to 58 volts n Power issipation: 5 watts n RoHS compliant* n -Q compliant** pplications n Protection of power buses n Protection of

More information

SMBJ-Q Transient Voltage Suppressor Diode Series

SMBJ-Q Transient Voltage Suppressor Diode Series *RoHS OMPLINT eatures n Surface Mount SM package n Standoff Voltage: 12 to 58 volts n Power issipation: 6 watts n RoHS compliant* n -Q11 compliant** pplications n Protection of power buses n Protection

More information

1.5SMC Transient Voltage Suppressor Diode Series

1.5SMC Transient Voltage Suppressor Diode Series *RoHS OMPLINT & **HLOGN R eatures n RoHS compliant* and halogen free** n Surface Mount SM package n reakdown oltage: 6.8 to 55 volts n Peak Pulse Power: 5 watts n Typical temperature coefficient: R =.

More information

SMAJ-Q Transient Voltage Suppressor Diode Series

SMAJ-Q Transient Voltage Suppressor Diode Series *RoHS OMPLINT eatures n Surface Mount SM package n Standoff Voltage: 12 to 58 volts n Power issipation: 4 watts n RoHS compliant* n -Q1 compliant** pplications n Protection of power buses n Protection

More information

CDSOD323-TxxLC - TVS Diode Series

CDSOD323-TxxLC - TVS Diode Series **RoHS OMPLINT eatures n Lead free as standard* n S protection 30 k max. n Low capacitance ~.0 p n Protects line n Uni/bidirectional configuration pplications n HMI.4 n igital isual Interface (I) n US

More information

5.0SMDJ Transient Voltage Suppressor Diode Series

5.0SMDJ Transient Voltage Suppressor Diode Series *RoHS OMPLINT eatures n RoHS compliant* and halogen free** n Surface mount SM package n Standoff voltage: 5 to 7 volts n Peak Pulse Power: 5 watts n Typical temperature coefficient: V R =. % x VR @ 25

More information

SMBJ Transient Voltage Suppressor Diode Series

SMBJ Transient Voltage Suppressor Diode Series *RoHS OMPLINT eatures n RoHS compliant* n Surface Mount SM package n Standoff Voltage: 5 to 495 volts n Power issipation: 6 watts pplications n I 6-4-2 S (Min. Level 4) n I 6-4-4 T n I 6-4-5 Surge SMJ

More information

CD214A-B220 ~ B260 Schottky Barrier Rectifier Chip Diode

CD214A-B220 ~ B260 Schottky Barrier Rectifier Chip Diode Features SM package Surface mount Very low forward voltage drop General Information The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop

More information

CD214B Transient Voltage Suppressor Diode Series

CD214B Transient Voltage Suppressor Diode Series *RoHS OMPLINT eatures Lead free RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 6 watts Model 214 is currently available, although not recommended for new designs.

More information

CDSOD323-TxxC-DSL - TVS Diode Series

CDSOD323-TxxC-DSL - TVS Diode Series *RoHS OMPLINT & **HLOGN R eatures n Protects one line or one I/O port n idirectional configuration n S protection 30 max. n Low capacitance ~ 3 p typ. n Replaces 0805 MLV devices n RoHS compliant* n Halogen

More information

SMBJ Transient Voltage Suppressor Diode Series

SMBJ Transient Voltage Suppressor Diode Series *RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5 to 495 volts Power issipation: 6 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage

More information

CD214C Transient Voltage Suppressor Diode Series

CD214C Transient Voltage Suppressor Diode Series *RoHS OMPLINT eatures Lead free RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 15 watts Model 214 is currently available, although not recommended for new designs.

More information

SMBJ Transient Voltage Suppressor Diode Series

SMBJ Transient Voltage Suppressor Diode Series *RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 6 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage

More information

SMCJ Transient Voltage Suppressor Diode Series

SMCJ Transient Voltage Suppressor Diode Series *RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 15 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage

More information

CDSOD323-TxxC - TVS Diode Array Series

CDSOD323-TxxC - TVS Diode Array Series *RoS OMPLINT eatures n RoS compliant* n Protects one line or one I/O port n idirectional configuration n S protection 30 k max. n Low capacitance: ~3 p typical n Replaces 0805 ML devices pplications n

More information

CD0603-B0xR Schottky Barrier Chip Diode Series

CD0603-B0xR Schottky Barrier Chip Diode Series *RoHS OMPLINT & **HLOGN R eatures n RoHS compliant* n Leadless chip form n High current capability n Low forward voltage n Halogen free** pplications n Switch Mode Power Supplies (SMPS) n Portable equipment

More information

CD123D-B1xR Schottky Barrier Chip Diode Series

CD123D-B1xR Schottky Barrier Chip Diode Series *RoHS OMPLINT & **HLOGN R eatures n RoHS compliant* n Leadless chip form n High current capability n Low forward voltage n Halogen free** pplications n Switch Mode Power Supplies (SMPS) n Portable equipment

More information

SMCJ Transient Voltage Suppressor Diode Series

SMCJ Transient Voltage Suppressor Diode Series *RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 495 volts Power issipation: 15 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage

More information

SMLJ Transient Voltage Suppressor Diode Series

SMLJ Transient Voltage Suppressor Diode Series *RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 3 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMLJ Transient Voltage

More information

CD214L Transient Voltage Suppressor Diode Series

CD214L Transient Voltage Suppressor Diode Series *RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 3 watts Model 214L is currently available, although not recommended for new designs. Model

More information

Parameter Symbol Value Unit

Parameter Symbol Value Unit *RoHS OMPLINT VRSIONS VILL eatures Lead free versions available RoHS compliant (lead free version)* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 6 watts 214 Transient Voltage

More information

SMLJ Transient Voltage Suppressor Diode Series

SMLJ Transient Voltage Suppressor Diode Series *RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 3 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMLJ Transient Voltage

More information

SMAJ Transient Voltage Suppressor Diode Series

SMAJ Transient Voltage Suppressor Diode Series *RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 495 volts Power issipation: 4 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage

More information

Lead free RoHS compliant* Low profile package Surface mount Very low forward voltage drop

Lead free RoHS compliant* Low profile package Surface mount Very low forward voltage drop *RoHS OMPLINT eatures Lead free RoHS compliant* Low profile package Surface mount Very low forward voltage drop This series is currently available, but not recommended for new designs. The Model 23- Series

More information

CD-MBL1xxS Surface Mount Bridge Rectifier Diode

CD-MBL1xxS Surface Mount Bridge Rectifier Diode eatures n RoHS compliant* n Low power loss and high efficiency n High current capability n Low profile package pplications n operated products n omputer monitors n Set-top boxes n able modems General Information

More information

TISP4G024L1W G.Fast VDSL Protector

TISP4G024L1W G.Fast VDSL Protector *RoHS COMPLIANT U80L Features n Low capacitance n Low distortion n Surge protection n RoHS compliant* Applications n G.Fast equipment n xdsl modems and line cards TISP4G024LW G.Fast VDSL Protector General

More information

SMAJ Transient Voltage Suppressor Diode Series

SMAJ Transient Voltage Suppressor Diode Series *RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 495 volts Power issipation: 4 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage

More information

TISP4G024L1W G.Fast VDSL Protector

TISP4G024L1W G.Fast VDSL Protector *RoHS COMPLIANT U80L Features Low capacitance Low distortion Surge protection RoHS compliant* Applications G.Fast equipment xdsl modems and line cards TISP4G024LW G.Fast VDSL Protector General Information

More information

CDSOT23-SR208 Steering Diode Array

CDSOT23-SR208 Steering Diode Array *RoHS COMPLIANT A381L Features n Lead free device n RoHS compliant* n Protects four lines n ES and EFT protection n Low capacitance:

More information

SM8S-Q Transient Voltage Suppressor Diode Series

SM8S-Q Transient Voltage Suppressor Diode Series *RoHS & **AEC-Q COMPLIANT 23 Features n Maximum Peak Power Dissipation: 66 watts n Meets ISO7637-2 / ISO675-2 Surge specification (varies by test condition) n RoHS compliant* n AEC-Q compliant** Applications

More information

CDSOT236-DSL03xx - TVS Diode Array Series

CDSOT236-DSL03xx - TVS Diode Array Series *RoHS COMPLIANT Features RoHS compliant* Low capacitance < pf ESD protection Surge protection Applications ADSL / DSL cards Personal Digital Assistants (PDAs) Mobile phones and accessories Portable electronics

More information

Solution 1 TVS Diode Array: CDSOT C 2 Bridge Rectifiers: CDNBS04-B TVS Diode: SMBJ58A 1 Transformer: SM51108EL

Solution 1 TVS Diode Array: CDSOT C 2 Bridge Rectifiers: CDNBS04-B TVS Diode: SMBJ58A 1 Transformer: SM51108EL Solution Products SOT236-0504 NS04-08200 Ethernet 10/100 ase-t Power over Ethernet (PoE) P Unit Protection Objective 10/100 ase-t Power over Ethernet (PoE) interfaces combine data and 48 V to provide remote

More information

SMF4L Transient Voltage Suppressor Diode Series

SMF4L Transient Voltage Suppressor Diode Series L V 8 8 Features n Surface Mount SO-23FL package n Standoff Voltage: 2 to 58 volts n Power issipation: 4 watts n RoHS compliant* pplications n Protection of power buses n Protection of /O interfaces n

More information

5.0SMDJ Transient Voltage Suppressor Diode Series

5.0SMDJ Transient Voltage Suppressor Diode Series *RoHS OMPLINT eatures n RoHS compliant* and halogen free** n Surface mount SM package n Standoff voltage: 12 to 170 volts n Peak Pulse Power: 5000 watts n Typical temperature coefficient: V R = 0.1 % x

More information

ATV66SM836A-G. SMD Transient Voltage Suppressor. Working Voltage: 36 Volts Peak Pulse Power: 6600 Watts RoHS Device. Features.

ATV66SM836A-G. SMD Transient Voltage Suppressor. Working Voltage: 36 Volts Peak Pulse Power: 6600 Watts RoHS Device. Features. orking Voltage: 36 Volts Peak Pulse Power: 66 atts RoHS Device eatures -Glass passivated chip. -66 peak pulse power capability with a 1/µs waveform, repetitive rate (duty cycle):.1% -Meets ISO7637-2 5a

More information

CDDFN N - TVS/Steering Diode Array

CDDFN N - TVS/Steering Diode Array *RoHS COMPLIANT Features Low capacitance -.3 pf ESD protection Vcc + six I/O s RoHS compliant* Applications USB 3. HDMI. High speed port protection Portable electronics CDDFN-N - TVS/Steering Diode Array

More information

BOURNS CD214A-F150-F1600 Rectifier Datasheet

BOURNS CD214A-F150-F1600 Rectifier Datasheet BOURNS CD214A-F150-F1600 Rectifier Datasheet http://www.manuallib.com/bourns/cd214a-f150-f1600-rectifier-datasheet.html The markets of portable communications, computing and video equipment are challenging

More information

PESDLC23T5VU Low Capacitance ESD Protector

PESDLC23T5VU Low Capacitance ESD Protector Low Capacitance ESD Protector Description The is a TVS designed to protect I/O or data lines from the damaging effects of ESD. It is low capacitance transient voltage suppressors for high speed data interface

More information

SMF05C. TVS Diode Array For ESD and Latch-Up Protection PRELIMINARY. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics

SMF05C. TVS Diode Array For ESD and Latch-Up Protection PRELIMINARY. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics PROTETION PRODUTS Description The SMF series TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD and other voltage-induced transient events. They are designed for

More information

LCDA15-1. Low Capacitance TVS Diode Array PRELIMINARY Features. PROTECTION PRODUCTS Description. Mechanical Characteristics.

LCDA15-1. Low Capacitance TVS Diode Array PRELIMINARY Features. PROTECTION PRODUCTS Description. Mechanical Characteristics. Description The is a low capacitance transient voltage suppressor (TVS) diode array. It is designed to protect sensitive CMOS ICs from the damaging effects of ESD and lightning. Each device will protect

More information

SMS Volt TVS Array For ESD and Latch-Up Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.

SMS Volt TVS Array For ESD and Latch-Up Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics. Description The SMS series of TS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD, lightning, and other voltage-induced transient events. Each device will protect

More information

TISP4P0xxL1N Overvoltage Protector Series

TISP4P0xxL1N Overvoltage Protector Series *RoHS COMPLIANT Y1801L TISP4P015L1N THRU TISP4P035L1N LOW CAPACITANCE BIDIRECTIONAL THYRISTOR OEROLTAGE PROTECTOR TISP4P0xxL1N Overvoltage Protector Series Designed for ADSL, ADSL, DSL, DSL protection

More information

SR70 RailClamp Low Capacitance TVS Diode Array

SR70 RailClamp Low Capacitance TVS Diode Array Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The has been specifically designed to protect sensitive components which are connected to data and transmission

More information

PESDAWC236T5VU Low Capacitance TVS Array

PESDAWC236T5VU Low Capacitance TVS Array Low Capacitance TVS Array Description The is low capacitance transient voltage suppressor 6 5 4 array for high speed data interface that designed to protect sensitive electronics from damage or latch-up

More information

PSR05 STEERING DIODE/TVS ARRAY COMBO APPLICATIONS IEC COMPATIBILITY (EN ) FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION SOT-143

PSR05 STEERING DIODE/TVS ARRAY COMBO APPLICATIONS IEC COMPATIBILITY (EN ) FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION SOT-143 56 PSR5 STEERIN IOE/TVS ARRA COMBO APPLICATIONS Ethernet - / Base T irewire Wireless Communications USB Interface IEC COMPATIBILIT (EN6-) 6--2 (ES): Air - 5kV, Contact - 8kV 6-- (ET): A - 5/5ns 6--5 (Surge):

More information

Low clamping and low capacitance bidirectional single line ESD protection

Low clamping and low capacitance bidirectional single line ESD protection Low clamping and low capacitance bidirectional single line ESD protection Datasheet - production data Description The ESDAL5-1BF4 is a bidirectional single line TVS diode designed to protect the data line

More information

UESD6V8S2B. Dual Line ESD Protection Diode Array UESD6V8S2B SOT523. General Description. M: Monthly Code UESD6V8S2B SOT523

UESD6V8S2B. Dual Line ESD Protection Diode Array UESD6V8S2B SOT523. General Description. M: Monthly Code UESD6V8S2B SOT523 General Description UESD6V8S2B Dual Line ESD Protection Diode Array UESD6V8S2B SOT523 The UESD6V8S2B of TVS diode array is designed to protect sensitive electronics from damage or latch-up due to ESD.

More information

TISP61089HDM Overvoltage Protector

TISP61089HDM Overvoltage Protector *RoHS COMPLINT TISP089HDM DUL FORWRD-CONDUCTING P-GTE THYRISTOR PROGRMMBLE OVERVOLTGE PROTECTOR TISP089HDM Overvoltage Protector Intended for Use in GR-089-CORE Issue Compliant Line Cards Dual, Voltage-Programmable

More information

CAN bus ESD protection diode

CAN bus ESD protection diode Rev. 04 15 February 2008 Product data sheet 1. Product profile 1.1 General description in a small SOT23 (TO-236AB) Surface-Mounted Device (SMD) plastic package designed to protect two automotive Controller

More information

HSMP-381x, 481x Surface Mount RF PIN Low Distortion Attenuator Diodes

HSMP-381x, 481x Surface Mount RF PIN Low Distortion Attenuator Diodes HSMP-81x, 481x Surface Mount RF PIN Low istortion Attenuator iodes ata Sheet escription/applications The HSMP-81x series is specifically designed for low distortion attenuator applications. The HSMP-481x

More information

ESDCANxx-2BLY. Automotive dual-line TVS in SOT23-3L for CAN bus. Datasheet. Features. Applications. Description

ESDCANxx-2BLY. Automotive dual-line TVS in SOT23-3L for CAN bus. Datasheet. Features. Applications. Description Datasheet Automotive dual-line TVS in SOT23-3L for CAN bus Features AEC-Q101 qualified Dual-line ESD and EOS protection Breakdown voltage: V BR : 25 V : 27 V : 27.5 V : 38 V Bidirectional device Max pulse

More information

TV04A5V0-HF Thru. TV04A441-HF

TV04A5V0-HF Thru. TV04A441-HF TV45V-HF Thru. TV444-HF Working Peak : 5. to 44 Volts Power Dissipation: 4 Watts RoHS Device Halogen Free Features - Glass passivated chip. - 4W peak pulse power capability with a / µs waveform, repetitive

More information

Automotive Transil, transient voltage suppressor (TVS) for LIN bus. Description

Automotive Transil, transient voltage suppressor (TVS) for LIN bus. Description Automotive Transil, transient voltage suppressor (TVS) for LIN bus Datasheet - production data 1 SOD323 2 Description The device is an asymmetrical Transil diode designed specifically for one automotive

More information

DATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER LBD8CXXL01 series

DATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER LBD8CXXL01 series Product specification ecember 18, 18 V. ATA SHEET ELECTROSTATIC ISCHARGE PROTECTION EVICES INUSTRIAL / CONSUMER series RoHS compliant & Halogen free 2 Electrostatic ischarged Protection evices (ES) ata

More information

EAYW ESD5425E ESD5425E. Descriptions. Features. Order information. Applications. http//:

EAYW ESD5425E ESD5425E. Descriptions. Features. Order information. Applications. http//: 4-Lines, Uni-directional, Low Capacitance Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The is a low capacitance TVS (Transient Voltage Suppressor) array designed to protect high

More information

PARAMETER SYMBOL TESD5V0V4UA UNIT Marking code on the device

PARAMETER SYMBOL TESD5V0V4UA UNIT Marking code on the device V WM =5V,.8pF ESD Protection Array FEATURES Meet IEC61-4-2(ESD) ±17kV(air), ±12kV(contact) Working Voltage: 5V Compliant to RoHS directive 211/65/EU and in accordance to WEEE 22/96/EC Halogen-free according

More information

RClamp0504N RailClamp Low Capacitance TVS Diode Array

RClamp0504N RailClamp Low Capacitance TVS Diode Array - RailClamp Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The RClamp series has been specifically designed to protect sensitive components which are

More information

TClamp0602N. Low Capacitance TVS for Ethernet and Telecom Interfaces. PROTECTION PRODUCTS - TransClamp ΤΜ Description. Features

TClamp0602N. Low Capacitance TVS for Ethernet and Telecom Interfaces. PROTECTION PRODUCTS - TransClamp ΤΜ Description. Features ΤΜ - TransClamp ΤΜ Description A TransClamp ΤΜ is a low capacitance TVS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components

More information

5V 48V Small Footprint, Surface Mount Transient Voltage Suppressors

5V 48V Small Footprint, Surface Mount Transient Voltage Suppressors Available 5V 48V Small Footprint, Surface Mount Transient Voltage Suppressors DESCRIPTION Microsemi s unique and new Powermite UPT series of transient voltage suppressors feature oxidepassivated chips

More information

WE05MF. 2 SOT-553 (Top View) Features IEC COMPATIBILITY (EN ) Tel: Transient Voltage Suppressor SOT-553

WE05MF. 2 SOT-553 (Top View) Features IEC COMPATIBILITY (EN )   Tel: Transient Voltage Suppressor SOT-553 Document: W030044, Rev: A Transient Voltage Suppressor Features Solid-state silicon-avalanche technology 30 Watts Peak Pulse Power per Line (t p =8/20μs) Low operating and clamping voltages Up to Four

More information

PAM1LIN 200 WATT ASYMMETRICAL LINE PROTECTION TVS ARRAY DESCRIPTION SOD-323 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION

PAM1LIN 200 WATT ASYMMETRICAL LINE PROTECTION TVS ARRAY DESCRIPTION SOD-323 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION 200 WATT ASYMMETRICAL LINE PROTECTION TVS ARRAY DESCRIPTION The is an asymmetrical line protection transient voltage suppressor array, designed for local interconnect network (LIN) bus protection. This

More information

Green. Bottom View. Top View

Green. Bottom View. Top View Product Summary B140Q/BQ V RRM (V) I O (A) V Max (V) I R Max (ma) T A = +25 T A = +25 40 1.0 0.5 0.5 B150Q, B160Q V RRM (V) I O (A) V Max (V) I R Max (ma) T A = +25 T A = +25 50/60 1.0 0.7 0.5 Description

More information

HSMP-382x, 482x. Data Sheet. Surface Mount RF PIN Switch and Limiter Diodes. Features

HSMP-382x, 482x. Data Sheet. Surface Mount RF PIN Switch and Limiter Diodes. Features HSMP-382x, 482x Surface Mount RF PIN Switch and Limiter iodes ata Sheet escription/applications The HSMP-382x series is optimized for switching applications where ultra-low resistance is required. The

More information

STIEC45-xxAS, STIEC45-xxACS

STIEC45-xxAS, STIEC45-xxACS Transil TVS for IEC 61000-4-5 compliance Datasheet - production data MIL STD 883G, method 3015-7 Class 3B 25 kv HBM (human body model) Resin meets UL 94, V0 MIL-STD-750, method 2026 solderability EIA-481

More information

SM712 Series 600W Asymmetrical TVS Diode Array

SM712 Series 600W Asymmetrical TVS Diode Array SM712 Series 6W Asymmetrical TVS Diode Array RoHS Pb GREEN Description The SM712 TVS Diode Array is designed to protect RS-485 applications with asymmetrical working voltages (-7V to 12V from damage due

More information

AOZ8211 One-line TVS Diode

AOZ8211 One-line TVS Diode One-line TVS Diode General Description The OZ8211 is a one-line transient voltage suppressor diode designed to protect voltage sensitive electronics from high transient conditions and SD. This device incorporates

More information

PESDHC5D7VU ESD Protector

PESDHC5D7VU ESD Protector ESD Protector Description The protects sensitive semiconductor components from damage or upset due to electrostatic discharge (ESD) and other voltage induced transient events. They feature large cross-sectional

More information

DSL03-24 ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SOT-23-6 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS

DSL03-24 ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SOT-23-6 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The provides ESD, EFT and surge protection for high-speed data interfaces. The transient voltage array, steering diode combination device meets

More information

DATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER UBT23AXXL02 series

DATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER UBT23AXXL02 series Product specification December 19, 218 V. DATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER UBT2AXXL2 series RoHS compliant & Halogen free 2 Electrostatic Discharged Protection

More information

DATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER SDD32A05L01 series

DATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER SDD32A05L01 series Product specification November 7, 218 V. ATA SHEET ELECTROSTATIC ISCHARGE PROTECTION EVICES INUSTRIAL / CONSUMER series RoHS compliant & Halogen free 2 escription Electrostatic ischarged Protection evices

More information

SRV05-4-A ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SOT-23-6 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS

SRV05-4-A ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SOT-23-6 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS ULTRA LOW APAITANE STEERING DIODE/TVS ARRAY DESRIPTION The is a dual USB port protection array that features ultra low capacitance. This device can be used in applications such as video cards, SMART phones,

More information

istributed by: www.jameco.com 8834242 The content and copyrights of the attached material are the property of its owner. 58 STNR PITN TVS RRY PPITIONS aptop omputers ellular Phones igital ameras Personal

More information

TClamp3302N. Low Capacitance TVS for Ethernet and Telecom Interfaces. PROTECTION PRODUCTS - TransClamp ΤΜ Description. Features

TClamp3302N. Low Capacitance TVS for Ethernet and Telecom Interfaces. PROTECTION PRODUCTS - TransClamp ΤΜ Description. Features ΤΜ - TransClamp ΤΜ Description A TransClamp ΤΜ is a low capacitance TVS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components

More information

PESDxV4UG series. 1. Product profile. Very low capacitance quadruple ESD protection diode arrays in SOT353 package. 1.1 General description

PESDxV4UG series. 1. Product profile. Very low capacitance quadruple ESD protection diode arrays in SOT353 package. 1.1 General description in SOT353 package Rev. 02 7 April 2005 Product data sheet 1. Product profile 1.1 General description Very low capacitance quadruple ElectroStatic Discharge (ESD) protection diode arrays in very small SOT353

More information

AOZ8231A. One-line Bi-directional TVS Diode. General Description. Features. Applications

AOZ8231A. One-line Bi-directional TVS Diode. General Description. Features. Applications One-line Bi-directional TVS Diode General Description The OZ8231 is a one-line bi-directional transient voltage suppressor diode designed to protect voltage sensitive electronics from high transient conditions

More information

TISP821xMD Overvoltage Protectors

TISP821xMD Overvoltage Protectors *RoHS COMPLINT TISP8210MD BUFFERED P-GTE SCR DUL TISP8211MD BUFFERED N-GTE SCR DUL COMPLEMENTRY BUFFERED-GTE SCRS FOR DUL POLRITY SLIC OVERVOLTGE PROTECTION TISP821xMD Overvoltage Protectors High Performance

More information

3 * ESD5302N ESD5302N. Descriptions. Features. Applications. Order information. http//:

3 * ESD5302N ESD5302N. Descriptions. Features. Applications. Order information. http//: 2-Lines, Uni-directional, Ultra-low Capacitance Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The is an ultra-low capacitance TVS (Transient Voltage Suppressor) array designed to

More information

Data Sheet. GUx. HSMP - 389x & HSMP - 489x Series Surface Mount RF PIN Switch Diodes. Features. Description. Pin Connections and Package Marking

Data Sheet. GUx. HSMP - 389x & HSMP - 489x Series Surface Mount RF PIN Switch Diodes. Features. Description. Pin Connections and Package Marking HSMP - 389x & HSMP - 89x Series Surface Mount R PIN Switch iodes ata Sheet escription The HSMP-389x series is optimized for switching applications where low resistance at low current and low capacitance

More information

TV02W5V0-G Thru. TV02W191-G Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device

TV02W5V0-G Thru. TV02W191-G Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device TV2W5V-G Thru. TV2W9-G Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capility with a /us waveform,repetitive

More information

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below. Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic

More information

2 kw Surface Mount Transient Voltage Suppressor

2 kw Surface Mount Transient Voltage Suppressor Available 2 kw Surface Mount Transient Voltage Suppressor DESCRIPTION Screening in reference to MIL-PRF-190 available The MSMBG(J)2K3.0 MSMBG(J)2K5.0 series of surface mount 2.0 kilowatt transient voltage

More information

ATV02W5V0-HF Thru ATV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free

ATV02W5V0-HF Thru ATV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capability

More information

TV02W5V0-HF Thru TV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free

TV02W5V0-HF Thru TV02W191-HF Working Peak Reverse Voltage: Volts Peak Pulse Power:200 Watts RoHS Device Halogen Free TV2W5V-HF Thru TV2W9-HF Working Peak Reverse Voltage:5.-9 Volts Peak Pulse Power:2 Watts RoHS Device Halogen Free Features - Glass passivated chip. - Low leakage current. - 2W peak pulse power capility

More information

CBTVS2A16-1F3. Circuit breaker with transient voltage suppressor. Description. Features. Complies with the following standards:

CBTVS2A16-1F3. Circuit breaker with transient voltage suppressor. Description. Features. Complies with the following standards: Circuit breaker with transient voltage suppressor Description Datasheet production data Flip Chip (4 bumps) The CBTVS2A16-1F3 is a single line diode TVS integrating a fuse designed specifically for the

More information

B170BQ - B1100BQ. Features and Benefits. Product Summary C) Mechanical Data. Applications. Ordering Information (Note 5) Marking Information

B170BQ - B1100BQ. Features and Benefits. Product Summary C) Mechanical Data. Applications. Ordering Information (Note 5) Marking Information Green 1.0A HIGH VOLTAGE SHOTTKY BARRIER RETIFIER Product Summary (@+25 ) B170BQ B180BQ B190BQ 70 1.0 0.79 0.5 80 1.0 0.79 0.5 90 1.0 0.79 0.5 B10BQ 0 1.0 0.79 0.5 Features and Benefits Guard Ring Die onstruction

More information

SIDACtor Protection Thyristors Broadband Optimized TM Protection. SEP Biased Series - 5x6 QFN. Description

SIDACtor Protection Thyristors Broadband Optimized TM Protection. SEP Biased Series - 5x6 QFN. Description Phillip Havens Oct 2008 SIDCtor Protection Thyristors SEP Biased Series - 5x6 QN RoHS Pb e3 Description gency pprovals gency Pinout Designation Line in Ground Line in Schematic Symbol Line In (1 -Bias

More information

PESDxS1UL series. 1. Product profile. ESD protection diodes in a SOD882 package. 1.1 General description. 1.2 Features. 1.

PESDxS1UL series. 1. Product profile. ESD protection diodes in a SOD882 package. 1.1 General description. 1.2 Features. 1. Rev. 01 31 March 2006 Product data sheet 1. Product profile 1.1 General description Unidirectional ElectroStatic Discharge (ESD) protection diodes in a SOD882 leadless ultra small Surface Mounted Device

More information

P6KE. Transil, transient voltage surge suppressor (TVS) Features. Description. Complies with the following standards

P6KE. Transil, transient voltage surge suppressor (TVS) Features. Description. Complies with the following standards Transil, transient voltage surge suppressor (TVS) Datasheet production data Features Peak pulse power: 600 W (10/0 µs ) Stand-off voltage range 6.8 to 440 V Unidirectional and bidirectional types Low clamping

More information

TISP7015 (VLV) Overvoltage Protector

TISP7015 (VLV) Overvoltage Protector *RoHS COMPLIANT VERSIONS AVAILABLE TISP7015 TRIPLE ELEMENT THYRISTOR OVERVOLTAGE PROTECTORS TISP7015 (VLV) Overvoltage Protector Three Terminal Very Low Voltage (VLV) Protection Ion-Implanted Breakdown

More information

SM24CANA Series 200W TVS Diode Array

SM24CANA Series 200W TVS Diode Array SM24CANA Series 2W TVS Diode Array RoHS Pb GREEN Description The SM24CANA TVS Diode Array is designed to protect automotive Controller Area Network (CAN lines from damage due to electrostatic discharge

More information

UMD03B through UMD36B

UMD03B through UMD36B PRODUCT DESCRIPTION The UMDXXB series are Bi-directional Transient Voltage Suppressor Arrays that designed to protect components which are connected to data and transmission lines against electrostatic

More information

Lightning Surge Protection - SP4031 SP1050 Series 7 (N/C) 6 (N/C)

Lightning Surge Protection - SP4031 SP1050 Series 7 (N/C) 6 (N/C) SP431 RoHS Pb GREEN Description The SP431 hybrid protector offers both overcurrent and differential only overvoltage protection for applications such as 1/1/1 BaseT ports. Compliant with the newest standards

More information