SM8S-Q Transient Voltage Suppressor Diode Series
|
|
- Erica Washington
- 5 years ago
- Views:
Transcription
1 *RoHS & **AEC-Q COMPLIANT 23 Features n Maximum Peak Power Dissipation: 66 watts n Meets ISO / ISO675-2 Surge specification (varies by test condition) n RoHS compliant* n AEC-Q compliant** Applications n High peak power applications (up to rated limits) n High temperature applications (up to rated limits) n Clamping diode n Load switching and lighting General Information Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-28 size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 6 V up to 43 V. Typical fast response times are less than. picosecond from V to Breakdown Voltage. Absolute Maximum Ratings (@ T A = 25 C Unless Otherwise Noted) Parameter Symbol Value Unit Maximum Peak Pulse Power Dissipation (/ µs) P PK 66 W Maximum Peak Pulse Power Dissipation (/ µs) P PK 52 W Power Dissipation with Infinite Heatsink (T c = 25 C) P D 8 W Operating Temperature Range T J -55 to +75 C Storage Temperature Range T STG -55 to +75 C Electrical Characteristics (@ T A = 25 C Unless Otherwise Noted) Unidirectional Device Bidirectional Device Breakdown Voltage V BR (Volts) Working Peak Reverse Voltage Maximum Reverse V RWM Maximum Reverse I RSM Maximum Reverse Surge Current Part No. Part No. Min. I T (ma) V RWM (V) I R (μa) V RSM (V) I RSM (A) SM8S6A SM8S6CA SM8S7A SM8S7CA SM8S8A SM8S8CA SM8S2A SM8S2CA SM8S22A SM8S22CA SM8S24A SM8S24CA SM8S26A SM8S26CA SM8S28A SM8S28CA SM8S3A SM8S3CA SM8S33A SM8S33CA SM8S36A SM8S36CA SM8S4A SM8S4CA SM8S43A SM8S43CA Asia-Pacific: Tel: asiacus@bourns.com EMEA: Tel: eurocus@bourns.com The Americas: Tel: americus@bourns.com WARNING Cancer and Reproductive Harm - *RoHS Directive 22/95/EC Jan. 27, 23 including annex and RoHS Recast 2/65/EU June 8, 2. ** Q part number suffix for automotive and other applications requiring appropriate AEC-Q compliance.
2 Performance Graphs Load Dump Power Characteristics Steady State Power Dissipation Load Dump Power (W) Power Dissipation (W) Case Temperature, Tc ( C) Case Temperature ( C) ( ms Exponential Waveform) Pulse Waveform Maximum Non-Repetitive Surge Current Input Peak Pulse Current (%) 5 5 t r = µs Peak value (I PPM ) Half value = I PPM T J = 25 C Pulse width (td) is defined as the point where the peak current decays to 5 % of I PPM Reverse Surge Power (W) t d t - Time (ms) Pulse Width (ms) - /2 I PP Exponential Waveform
3 Performance Graphs Typical Transient Thermal Impedance Typical Junction Capacitance Transient Thermal Impedance ( C/W). R θja R θjc C J - Junction Capacitance (pf),, Measured at Stand-Off Voltage V WM T J = 25 C f =. MHz V sig = 5 mv p-p Measured at Zero Bias..., t - Pulse Width (s) V WM - Reverse Stand-Off Voltage (V)
4 SM8S-Q 332 Transient - 2 mm SMD Voltage Trimming Suppressor Potentiometer Diode Series Performance Graphs ISO Test A ( Pulse) - SM8S24A ISO a ( Pulse) - SM8S24A t d : ms t d : 2 ms t d : 4 ms t d : ms t d : 2 ms t d : 4 ms Ri Ohm 4 Ri Ohm UA: 4 V UA: 3.5 V V Vs V Vs ISO Test A ( Pulse) - SM8S36A ISO a ( Pulse) - SM8S36A 2 3 t d : ms t d : 2 ms t d : 35 ms 2 3 t d : ms t d : 2 ms t d : 35 ms Ri Ohm 4 Ri Ohm UA: 28 V V Vs 8 UA: 27 V V Vs
5 Product Dimensions A D Dimension A Value 5.5 ±.5 (.6 ±.2) B E B C. ±.5 (.394 ±.2) 4.85 ±.5 (.9 ±.6) F D 3.5 ±.2 (.53 ±.8) C Metal Heatsink H G E F G 8.5 ±.2 (.335 ±.8) 9. ±.3 (.354 ±.2) 3. ±.5 (.8 ±.2) H 2. ±.5 (.79 ±.2) DIMENSIONS: MM (INCHES) Recommended Footprint I K Dimension I Value 3.5 ±.3 (.38 ±.2) J M N L J K L. ±.5 (.394 ±.2) 2. ±.3 (.79 ±.2) 2.7 ±.3 (.6 ±.2) M 9. ±.3 (.354 ±.2) N 4.5 ±.4 (.57 ±.6) DIMENSIONS: MM (INCHES)
6 Physical Specifications Case...Molded plastic per UL Class 94V- Polarity... Cathode band indicates unidirectional device No cathode band indicates bidirectional device How to Order Package SM8S = DO-28 Package Working Peak Reverse Voltage 8 = 8 V RWM (Volts) Suffix A = 5 % Tolerance Unidirectional Device CA = 5 % Tolerance Bidirectional Device AEC-Q Suffix Q = AEC-Q Compliant SM8S 8 CA - Q Typical Part Marking PART NUMBER CATHODE BAND SM8SXXX YYWW MANUFACTURER S TRADEMARK DATE CODE: YY = LAST TWO DIGITS OF YEAR WW = WEEK NUMBER Environmental Specifications Moisture Sensitivity Level... ESD Classification (HBM)... 3B
7 CDDFN5-54N SM8S-Q Transient - TVS/Steering Voltage Suppressor Diode Diode ArraySeries Packaging Information The product will be dispensed in tape and reel format (see diagram below). P P d Index Hole E T 2 B F W D 2 D D P A C Trailer Device Leader End Start DIMENSIONS: MM (INCHES) W pitches (min.) pitches (min.) Direction of Feed Devices are packed in accordance with EIA 48 standard specifications shown here. Item Symbol SM8S-Q Series Carrier Width A.77 ±.2 (.424 ±.8) Carrier Length B 6.33 ±.2 (.643 ±.8) Carrier Depth C 6.2 ±.2 (.237 ±.8) Sprocket Hole d.5 +. / -. ( / -.) Reel Outside Diameter D 33 ± 2. (2.992 ±.79) 6. Reel Inner Diameter D (2.362) MIN / -.2 Feed Hole Diameter D 2 ( / -.8) Sprocket Hole Position E.75 ±. (.69 ±.4) Punch Hole Position F.5 ±. (.453 ±.4) Punch Hole Pitch P 6. ±. (.63 ±.4) 4. ±. Sprocket Hole Pitch P (.57 ±.4) 2. ±. Embossment Center P (.79 ±.4) Overall Tape Thickness T 2 (.472) MAX. Tape Width W 24. ±.3 (.945 ±.2) 3.4 Reel Width W (.97) MAX. Quantity per Reel /9
8 Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns products manufactured by or on behalf of Bourns, Inc. and Unless otherwise expressly indicated in writing, Bourns products and data sheets relating thereto are subject to change and complete before placing orders for Bourns products. The characteristics and parameters of a Bourns product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns product with other components the actual performance of the Bourns product as meeting the requirements of a particular industry of Bourns products are responsible for ensuring compliance with safety-related requirements and standards applicable to Bourns on a case-by-case basis, use of any Bourns Bourns standard products that are suitable for use in aircraft standard the user s sole risk. custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns standard products shall also apply to such Bourns custom products. Users shall not sell, transfer, export or re-export any Bourns Bourns products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns products may not, without bilingual versions are available at: Web Page: PDF:
TISP4G024L1W G.Fast VDSL Protector
*RoHS COMPLIANT U80L Features Low capacitance Low distortion Surge protection RoHS compliant* Applications G.Fast equipment xdsl modems and line cards TISP4G024LW G.Fast VDSL Protector General Information
More informationCDDFN N - TVS/Steering Diode Array
*RoHS COMPLIANT Features Low capacitance -.3 pf ESD protection Vcc + six I/O s RoHS compliant* Applications USB 3. HDMI. High speed port protection Portable electronics CDDFN-N - TVS/Steering Diode Array
More informationSRP1038A Series - Shielded Power Inductors
*RoHS and AEC-Q COMPLIANT 131 Features Shielded construction Carbonyl powder core High saturation current Inductance range:. to 7 µh AEC-Q compliant RoHS compliant* and halogen free** SRP13A Series - Shielded
More informationTISP4G024L1W G.Fast VDSL Protector
*RoHS COMPLIANT U80L Features n Low capacitance n Low distortion n Surge protection n RoHS compliant* Applications n G.Fast equipment n xdsl modems and line cards TISP4G024LW G.Fast VDSL Protector General
More informationDCR DCR. Irms Isat. Max. Typ. Recommended Layout 5.2 (.205) 2.2 (.087) NATURAL COOLING
*RoHS COMPLIANT & AEC APPROVED R7 Features Shielded construction Carbonyl powder core High saturation current Low profile - 1. mm Inductance range:.1 to 1 µh AEC-Q qualified RoHS compliant* and halogen
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions DO-218 Compatible PRIMARY CHARACTERISTICS V BR 11.1 V to 52.8 V P PPM (1 x μs) 66 W P PPM (1 x
More informationCDSOT236-DSL03xx - TVS Diode Array Series
*RoHS COMPLIANT Features RoHS compliant* Low capacitance < pf ESD protection Surge protection Applications ADSL / DSL cards Personal Digital Assistants (PDAs) Mobile phones and accessories Portable electronics
More informationHigh Temperature Stability and High Reliability Conditions FEATURES. PARAMETER SYMBOL VALUE UNIT with 10/1000 μs waveform Peak pulse power dissipation
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 36 V V BR 11.1 V to 44.2 V P PPM (1 x 1 μs) 36 W P PPM (1
More informationCDSOT23-SR208 Steering Diode Array
*RoHS COMPLIANT A381L Features n Lead free device n RoHS compliant* n Protects four lines n ES and EFT protection n Low capacitance:
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions DO-28AB PRIMARY CHARACTERISTICS V BR 27 V P PPM ( x μs) 36 W P D 5 W V WM 22 V I RSM 7 A I FSM
More informationP4SMA Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n RoHS compliant* and halogen free** n Surface Mount SM package n reakdown Voltage: 6.8 to 55 volts n Peak Pulse Power: 4 watts n Typical temperature coefficient: V R =.1 % x V R
More informationSMCJ-Q Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n Surface Mount SM package n Standoff Voltage: 2 to 58 volts n Power issipation: 5 watts n RoHS compliant* n -Q compliant** pplications n Protection of power buses n Protection of
More information6600W, 10V 43V Surface Mount Transient Voltage Suppressor
66W, 1V 43V Surface Mount Transient Voltage Suppressor FEATURES AEC-Q11 qualified Junction passivation optimized design technology T J =175 C capability suitable for high reliability and automotive requirement
More information1.5SMC Transient Voltage Suppressor Diode Series
*RoHS OMPLINT & **HLOGN R eatures n RoHS compliant* and halogen free** n Surface Mount SM package n reakdown oltage: 6.8 to 55 volts n Peak Pulse Power: 5 watts n Typical temperature coefficient: R =.
More informationTISP4P0xxL1N Overvoltage Protector Series
*RoHS COMPLIANT Y1801L TISP4P015L1N THRU TISP4P035L1N LOW CAPACITANCE BIDIRECTIONAL THYRISTOR OEROLTAGE PROTECTOR TISP4P0xxL1N Overvoltage Protector Series Designed for ADSL, ADSL, DSL, DSL protection
More informationP4KE6.8A thru P4KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 54 V V BR bi-directional 6.8 V to 44 V P PPM 4 W P D 1.5 W I FSM (uni-directional only)
More informationSMAJ-Q Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n Surface Mount SM package n Standoff Voltage: 12 to 58 volts n Power issipation: 4 watts n RoHS compliant* n -Q1 compliant** pplications n Protection of power buses n Protection
More information6600W Transient Voltage Suppressor (TVS)
Description SM8S Series TVS diodes can be used in sensitive electronics protection against voltage transients induced by inductive load switching and lighting, especially for automotive load dump protection
More informationSMBJ-Q Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n Surface Mount SM package n Standoff Voltage: 12 to 58 volts n Power issipation: 6 watts n RoHS compliant* n -Q11 compliant** pplications n Protection of power buses n Protection
More informationCD0603-B0xR Schottky Barrier Chip Diode Series
*RoHS OMPLINT & **HLOGN R eatures n RoHS compliant* n Leadless chip form n High current capability n Low forward voltage n Halogen free** pplications n Switch Mode Power Supplies (SMPS) n Portable equipment
More informationBOURNS CD214A-F150-F1600 Rectifier Datasheet
BOURNS CD214A-F150-F1600 Rectifier Datasheet http://www.manuallib.com/bourns/cd214a-f150-f1600-rectifier-datasheet.html The markets of portable communications, computing and video equipment are challenging
More informationICTE5 thru ICTE18C, 1N6373 thru 1N6386. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
TRANSZORB Transient Voltage Suppressors Case Style 1.5KE PRIMARY CHARACTERISTICS V WM 5. V to 18 V V BR (uni-directional) 6. V to 21.2 V V BR (bi-directional) 9.2 V to 21.2 V P PPM 1 W P D 6.5 W I FSM
More informationMSP3V3, MSP5.0A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES. Series.
Surface Mount TRANSZORB Transient Voltage Suppressors esmp Series Top View Bottom View PRIMARY CHARACTERISTICS V WM 3.3 V to 5. V V BR 4.1 V to 7.7 V P PPM 15 W T J max. 15 C Polarity Uni-directional Package
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM (uni-directional) 5.8 V to 459 V V WM (bi-directional) 5.8 V to 185 V V BR (uni-directional) 6.8 V to 540 V V BR (bi-directional)
More informationSRR6038 Series - Shielded SMD Power Inductors
*RoHS COMPLIANT Features Height of. mm max. Current rating up to. A RoHS compliant* Applications Input/output of DC/DC converters Power supplies for: Portable communication equipment Camcorders LCD TVs
More informationSA5.0A thru SA170CA. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.0 V to 170 V V BR (uni-directional) 6.4 V to 209 V V BR (bi-directional) 6.4 V to 209 V P PPM 500 W P D 3.0 W I FSM
More information5.0SMDJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n RoHS compliant* and halogen free** n Surface mount SM package n Standoff voltage: 5 to 7 volts n Peak Pulse Power: 5 watts n Typical temperature coefficient: V R =. % x VR @ 25
More informationP6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V P PPM 600 W P D 5.0 W I FSM (uni-directional
More informationSinglFuse SF-1206HHxxM Series Features
*RoHS COMPLIANT & **HALOGEN FREE X SinglFuse SF-1206HHxxM Series Features n Single blow fuse for overcurrent protection n 3216 (EIA 1206) footprint n High current rating applications n High inrush withstand
More informationSA5.0A thru SA170CA. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.0 V to 170 V P PPM 500 W P D 3.0 W I FSM (uni-directional only) 70 A T J max. 175 C DEVICES FOR BI-DIRECTION APPLICATIONS
More informationMSP5.0A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. New Product
MSP5.A Surface Mount TRANSZORB Transient Voltage Suppressors esmp TM Series Top View Bottom View MicroSMP PRIMARY CHARACTERISTICS V WM 5. V P PPM W I FSM 25 A T J max. 5 C FEATURES Very low profile - typical
More informationSMBJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n RoHS compliant* n Surface Mount SM package n Standoff Voltage: 5 to 495 volts n Power issipation: 6 watts pplications n I 6-4-2 S (Min. Level 4) n I 6-4-4 T n I 6-4-5 Surge SMJ
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.80 V to 188 V V BR uni-directional 6.8 V to 220 V V BR bi-directional 6.8 V to 220 V P PPM 600 W P D 5.0 W I FSM (uni-directional
More informationCDSOT23-T24CAN CANbus Protector
*RoHS OMPLINT 2801L eatures n Single device for two I/O lines n Low capacitance for high-speed Nbus n I 61000-4-2 30 kv S n I 61000-4-5 (Level 1, WG 1.2/50) 500 V Surge n RoHS compliant* pplications n
More information5KP8.5A thru 5KP188A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES TYPICAL APPLICATIONS
TRANSZORB Transient Voltage Suppressors P6 PRIMARY CHARACTERISTICS V WM 8.5 V to 188 V V BR 9.4 V to 231 V P PPM 5 W P D 8. W I FSM 5 A T J max. 175 C Polarity Uni-directional Package P6 FEATURES P6 glass
More informationSMF4L Transient Voltage Suppressor Diode Series
L V 8 8 Features n Surface Mount SO-23FL package n Standoff Voltage: 2 to 58 volts n Power issipation: 4 watts n RoHS compliant* pplications n Protection of power buses n Protection of /O interfaces n
More informationCDSOD323-TxxC - TVS Diode Array Series
*RoS OMPLINT eatures n RoS compliant* n Protects one line or one I/O port n idirectional configuration n S protection 30 k max. n Low capacitance: ~3 p typical n Replaces 0805 ML devices pplications n
More informationCD123D-B1xR Schottky Barrier Chip Diode Series
*RoHS OMPLINT & **HLOGN R eatures n RoHS compliant* n Leadless chip form n High current capability n Low forward voltage n Halogen free** pplications n Switch Mode Power Supplies (SMPS) n Portable equipment
More informationBZW04 SERIES Taiwan Semiconductor
W, 5.8V - 376V Transient Voltage Suppressor BZW4 SERIES FEATURES - Excellent clamping capability - Low impedance surge resistance - W surge capability at / μs waveform - Very fast response time - Typical
More informationSMBJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5 to 495 volts Power issipation: 6 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More informationCDSOD323-TxxLC - TVS Diode Series
**RoHS OMPLINT eatures n Lead free as standard* n S protection 30 k max. n Low capacitance ~.0 p n Protects line n Uni/bidirectional configuration pplications n HMI.4 n igital isual Interface (I) n US
More informationTISP4A250H3BJ Overvoltage Protector
*RoHS COMPLIANT TISP4A250H3BJ ASYMMETRICAL-BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTOR TISP4A250H3BJ Overvoltage Protector RING Line Protection for: LCAS (Line Card Access Switch) such as Le75181, Le75183
More informationCDSOT23-T24CAN-Q CANbus Protector
*RoHS & OMPLINT eatures n Single device for two I/O lines n Low capacitance for high-speed Nbus n I 61000-4-2 30 kv S n I 61000-4-5 (Level 1, WG 1.2/50) 500 V Surge n RoHS compliant* n -Q101 compliant**
More informationNew Product. High Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 43 V V BR 11.1 V to 52.8 V P PPM 3 W P D 6. W I FSM 2 A T
More informationBZW06 SERIES Taiwan Semiconductor
600W, 3V - 376V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at / 0 μs waveform - Fast response time: Typically less than.0ps from
More informationTISP4xxxH3/M3BJ Series for LCAS Protection
*RoHS COMPLIANT TISP4125H3BJ/TISP4219H3BJ, TISP4125M3BJ/TISP4219M3BJ LCAS AND TIP PROTECTION PAIRS BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTORS Customized Voltage for LCAS Protection Battery-Backed Ringing...
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.8 V to 220 V V WM 5.8 V to 188 V P PPM 600 W P D 5.0 W I FSM (uni-directional only) A T J max. 150 C Polarity Uni-directional,
More informationSA SERIES Taiwan Semiconductor
500W, 5V - 170V Transient Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from
More informationSMBJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 6 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More informationP4KE SERIES Taiwan Semiconductor
400W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 400W surge capability at 10 / 1000 μs waveform - Fast response time: Typically less than
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 43 V V BR 11.1 V to 52.8 V P PPM 3 W P D 6. W I FSM 2 A T
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions Top View SlimSMA TM DO-22AC PRIMARY CHARACTERISTICS V BR 6.8 V to 5 V 5.8 V to 43.6 V P PPM (
More informationCDSOD323-TxxC-DSL - TVS Diode Series
*RoHS OMPLINT & **HLOGN R eatures n Protects one line or one I/O port n idirectional configuration n S protection 30 max. n Low capacitance ~ 3 p typ. n Replaces 0805 MLV devices n RoHS compliant* n Halogen
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. P6KE6V8(C)A - P6KE4(C)A 6W TRANSIENT VOLTAGE SUPPRESSOR Features 6W Peak Pulse
More informationDigital Audio Tuner for Automotive Automotive Entertainment Systems Automotive Navigation Systems PARAMETER SYMBOL VALUE UNITS
HIGH POWER TVS ARRAY APPLICATIONS Digital Audio Tuner for Automotive Automotive Entertainment Systems Automotive Navigation Systems SURFACE MOUNT FEATURES Junction Passivation Optimized Design Passivated
More informationSMCJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 15 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More informationHigh Power Density Surface Mount TRANSZORB Transient Voltage Suppressors
High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.4 V to 49.1 V V WM 5.0 V to 40 V P PPM 0 W I FSM (uni-directional only) 40 A T J max. 1 C Polarity
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions DESIGN SUPPORT TOOLS Models Available Top View Cathode esmp Series Bottom View PRIMARY CHARACTERISTICS
More informationSMCJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 495 volts Power issipation: 15 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage
More informationSURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE DEVICES FOR BIPOLAR APPLICATIONS
SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER 5.0 WATTS STEADY STATE TVS SMBJ SERIES FEATURES * Peak pulse power:600 W (/00 μs),4 kw (8/20 μs) * Plastic package has underwriters laboratory
More informationP6KE SERIES Taiwan Semiconductor
600W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps
More informationHigh Power Density Surface Mount PAR Transient Voltage Suppressors
High Power Density Surface Mount PAR Transient Voltage Suppressors esmp Series DO-22AA (SMP) PRIMARY CHARACTERISTICS V BR 6.8 V to 43 V V WM 5.8 V to 36.8 V P PPM (for V BR 6.8 V) 25 W P PPM (for V BR
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions DESIGN SUPPORT TOOLS Models Available Top View Cathode esmp Series Bottom View PRIMARY CHARACTERISTICS
More informationCD214B Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures Lead free RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 6 watts Model 214 is currently available, although not recommended for new designs.
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors esmp Series PRIMARY CHARACTERISTICS V BR uni-directional 4. V to 44.2 V V WM 3.3 V to 36 V P PPM 400 W I FSM 40 A T J max. 150 C Polarity Uni-directional
More informationSMLJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 3 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMLJ Transient Voltage
More informationCD214C Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures Lead free RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 15 watts Model 214 is currently available, although not recommended for new designs.
More informationP6SMB6.8AT3G Series, SZP6SMB6.8AT3G Series. 600 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional*
P66.8AT3G Series, SZP66.8AT3G Series 600 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional* The series is designed to protect voltage sensitive components from high voltage, high energy
More information15,000 Watt Transient Voltage Suppressor (TVS) Protection Device
Compliant 15,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This device clamps dangerous high-voltage short-term transients such as those produced by the secondary effects of
More information5.0SMDJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n RoHS compliant* and halogen free** n Surface mount SM package n Standoff voltage: 12 to 170 volts n Peak Pulse Power: 5000 watts n Typical temperature coefficient: V R = 0.1 % x
More informationP6SMB11AT3G Series. TVS Diodes. Surface Mount > 600W > P6SMB11AT3G Series. Bi-directional. Cathode. Anode. Uni-directional.
P6SMB11AT3G Series Pb Description The P6SMB11AT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge
More information5V 48V Small Footprint, Surface Mount Transient Voltage Suppressors
Available 5V 48V Small Footprint, Surface Mount Transient Voltage Suppressors DESCRIPTION Microsemi s unique and new Powermite UPT series of transient voltage suppressors feature oxidepassivated chips
More informationTrimmer Potentiometers
PV6.pdf /9/7 Trimmer Potentiometers Lead Sealed Type Multiturn PV6 Series COMMON DIMENSIONS PV6 Series 6.40 ±. (.5 ±.05).8 MIN. (.05) 0.0 (.95).5 (.060).7 ± 0. (.050 ±.004) 4.8 ±. (.90 ±.005) 9.5 (.75)
More informationTransient Voltage Suppression Diodes: P6SMB Series SMD Type 600 W
Features 1. For surface mounted applications 2. RoHS compliant and halogen-free 3. Reliable low cost construction utilizing molded plastic technique 4. Glass passivated chip junction 5. Both bi-directional
More informationCD214A-B120 ~ B1100 Schottky Barrier Rectifier Chip Diode
*RoHS OMPLINT eatures n RoHS compliant* n SM package n Surface mount n Very low forward voltage drop This series is currently available but not recommended for new designs. The Model 24-xR Series is the
More informationPAM28DOAC Series 400 WATT TVS COMPONENT APPLICATIONS DO-214AC PACKAGE MECHANICAL CHARACTERISTICS FEATURES PIN CONFIGURATIONS. Automotive Applications
4 WATT TVS COMPONENT APPLICATIONS Automotive Applications DO-214AC PACKAGE FEATURES AEC-Q11 Qualified ISO 7637-2 Pulse 1, 2a, 2b, 3a, 3b Compliant UL File Recognition #E28219 IEC 6-4-2 (ESD): Level 4 -
More information200W, 5V - 100V Surface Mount Transient Voltage Suppressor
200W, 5V - 100V Surface Mount Transient Voltage Suppressor FEATURES Photo Glass passivated junction Low power loss, high efficiency Ideal for automated placement Excellent clamping capability Typical I
More informationCD-MBL1xxS Surface Mount Bridge Rectifier Diode
eatures n RoHS compliant* n Low power loss and high efficiency n High current capability n Low profile package pplications n operated products n omputer monitors n Set-top boxes n able modems General Information
More informationCD214A-B220 ~ B260 Schottky Barrier Rectifier Chip Diode
*RoHS OMPLINT eatures n RoHS compliant* n SM package n Surface mount n Very low forward voltage drop This series is currently available but not recommended for new designs. The Model 24-2xR Series is the
More information1500 Watt Low Clamping Factor Transient Voltage Suppressor
1N6358 1N637 or Available 1500 Watt Low Clamping Factor Transient Voltage Suppressor DESCRIPTION This Transient Voltage Suppressor (TVS) series for 1N6358 through 1N637 are JEDEC registered selections
More informationSMLJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 3 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMLJ Transient Voltage
More information15,000 Watt Transient Voltage Suppressor (TVS) Protection Device
M1KP22A M1KP280CA(e3) Available 1,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This Transient Voltage Suppressor series of M1KP22A M1KP280CA offers an extended voltage range
More information1.5SMCxxAT3G. TVS Diodes. Surface Mount > 1500W > 1.5SMCxxAT3G. Cathode. Anode. Uni-directional. Description
1.5SMCxxAT3G Pb Description The 1.5SMCxxAT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability,
More informationSRP7050TA Series - Shielded Power Inductors
*RoHS COMPLIANT, **HALOGEN FREE & AEC-Q COMPLIANT Features n Shielded construction n Carbonyl powder core n High saturation current n Inductance range:.33 to µh n AEC-Q compliant n RoHS compliant* and
More information30KP SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A =25 C unless otherwise specified
3KP SERIES 3W TRANSIENT VOLTAGE SUPPRESSOR Pb Features Glass Passivated Die Construction 3W Peak Pulse Power Dissipation 8V 88V Standoff Voltage A B A Uni- and Versions Available Excellent Clamping Voltage
More information200W, 5V - 100V Surface Mount Transient Voltage Suppressor
200W, 5V - 100V Surface Mount Transient Voltage Suppressor FEATURES Photo Glass passivated junction Low power loss, high efficiency Ideal for automated placement Excellent clamping capability Typical I
More informationTISP83121D Unidirectional P & N-Gate Protector
*ohs COMPLINT DUL-GTE UNIDIECTIONL OVEVOLTGE POTECTO Unidirectional P & N-Gate Protector Overvoltage Protection for Dual-Voltage inging SLICs Programmable Protection Configurations up to ±100 V Typically
More informationSMPC5.0A thru SMPC36A, SMPC22AN thru SMPC85AN Surface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors DESIGN SUPPORT TOOLS Models Available SMPCxxA SMPCxxAN esmp Series 2 SMPC (TO-277A) A Anode K Cathode 1 Cathode 1 Cathode 2 Anode 1 Anode 2 click logo
More informationTransient Voltage Suppression Diodes Axial Leaded 5000W > TP5KP series. Features. Bi-directional 5000 W 8.0 W 400 A 3.5 V. -55 to 150 C.
TP5KP Series RoHS Pb e3 Description The TP5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationGlass Passivated Ultrafast Plastic Rectifier
Glass Passivated Ultrafast Plastic Rectifier SUPERECTIFIER DO-204AL (DO-4) FEATURES Superectifier structure for high reliability condition Cavity-free glass-passivated junction Ideal for printed circuit
More informationBi-directional 1500 W TVS in TO-277 (SMPC) Package FEATURES
Surface Mount PAR Transient Voltage Suppressors Bi-directional 1500 W TVS in TO-277 (SMPC) Package esmp Series Terminal 1 Terminal 2 FEATURES Junction passivation optimized PAR design T J = 185 C capability
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features Glass passivated junction Low zener impedance Excellent clamping capability 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty
More informationLead free RoHS compliant* Low profile package Surface mount Very low forward voltage drop
*RoHS OMPLINT eatures Lead free RoHS compliant* Low profile package Surface mount Very low forward voltage drop This series is currently available, but not recommended for new designs. The Model 23- Series
More informationTransient Voltage Suppression Diodes Axial Leaded 1500W > TP1.5KE series. Features 1500 W 6.5 W 200 A 3.5 V. -55 to 150 C. -55 to 175 C 15 C/W 75 C/W
TP.5KE Series RoHS Pb e3 Description The TP.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationSBR5E45P5. Features and Benefits. Product Summary A = +25 C) Description and Applications. Mechanical Data. Ordering Information (Note 4)
Green 5A SBR SUPER BARRIER RECTIFIER Product Summary (@T A = +25 C) Features and Benefits ADVANCED NEW NEW INFORMATION V RRM (V) I O (A) V F(MAX) (V) I R(MAX) (ma) 45 5 0.6 0.28 Description and Applications
More informationHigh Power Density Surface Mount PAR Transient Voltage Suppressors
High Power Density Surface Mount PAR Transient Voltage Suppressors esmp Series DO-22AA (SMP) PRIMARY CHARACTERISTICS V BR 6.8 V to 43 V P PPM (for V BR 6.8 V) 25 W P PPM (for V BR 7.5 V to 12 V) 3 W P
More informationPAM31DOAB Series 1500 WATT TVS COMPONENT APPLICATIONS DO-214AB PACKAGE MECHANICAL CHARACTERISTICS FEATURES PIN CONFIGURATIONS.
15 WATT TVS COMPONENT APPLICATIONS Automotive DO-214AB PACKAGE FEATURES AEC-Q11 Qualified UL File Recognition #E28219 Compatible with IEC 6-4-2 (ESD): Level 4 - Air 15kV, Contact 8kV Compatible with IEC
More informationESD-Protection Diode in LLP1006-2L
VESD5A1A-HD1 ESD-Protection Diode in LLP16-2L 2855 MARKING (example only) XY Bar = cathode marking X = date code Y = type code (see table below) 2 1 21121 2856 FEATURES Ultra compact LLP16-2L package Low
More informationCD214L Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 3 watts Model 214L is currently available, although not recommended for new designs. Model
More informationZener Diodes with Surge Current Specification
Zener Diodes with Surge Current Specification 17249 PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom. 3.6 to 200 V Test current I ZT 5 to 0 ma V BR 7 to 188 V V WM 6.2 to 160 V P PPM 150 W T
More information