JIEJIE MICROELECTRONICS CO., Ltd

Size: px

Start display at page:

Download "JIEJIE MICROELECTRONICS CO., Ltd"

Ami York
5 years ago
Views:

1 JIJI MICROLCTRONICS CO., Ltd SMCJ Series 1500W Transient Voltage Suppressor Rev.4 DSCRIPTION: TVS diodes can be used in a wide range of applications which like consumer electronic products, automotive industries, munitions, telecommunications, aerospace industries, and intelligent control systems. SMC ATURS: Low profile package. Low inductance. xcellent clamping capability. 1500W peak pulse power capability at μs waveform. Typical IR less than 1μA above 12V. ast response time: typically less than 1.0ps from 0V to VBR min. High temperature to reflow soldering: 260 /40s at terminals. Plastic package has underwriters laboratory flammability 94V-0. Meets MSL level 1, per J-STD020, L maximum peak of 260. or surface mounted applications in order to optimize board space. Symbol ABSOLUT MAXIMUM RATINGS (T A =25, RH=45%-75%, unless otherwise noted) Parameter Symbol Value Unit Operating junction and storage temperature range T J / T STG -55 to +150 Steady state power dissipation at T L =75 P M(AV) 6.5 W Peak pulse power dissipation on 10/1000μs waveform Maximum instantaneous forward voltage at 100A for unidirectional Peak forward surge current, 8.3ms single half sine wave(note 1) P PP 1500 W V 5.0 V I SM 200 A Typical thermal resistance junction to lead R θjl 15 /W Typical thermal resistance junction to ambient R θja 75 /W Notes: 1. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional device only, duty cycle=4 per minute maximum TL: / 7-

2 MARKING 1409 BD BD: Device Marking Code 1409: In ninth week, 2014 LCTRICAL CHARACTRISTICS (T A =25 ) 1 Part Number Marking V R I R V T I T V PP I PP Uni-Polar Bi-Polar Uni Bi V μa min(v) max(v) ma max(v) A SMCJ5.0A SMCJ5.0CA GD BD SMCJ6.0A SMCJ6.0CA GDG BDG SMCJ6.5A SMCJ6.5CA GDK BDK SMCJ7.0A SMCJ7.0CA GDM BDM SMCJ7.5A SMCJ7.5CA GDP BDP SMCJ8.0A SMCJ8.0CA GDR BDR SMCJ8.5A SMCJ8.5CA GDT BDT SMCJ9.0A SMCJ9.0CA GDV BDV SMCJ10A SMCJ10CA GDX BDX SMCJ11A SMCJ11CA GDZ BDZ SMCJ12A SMCJ12CA G B SMCJ13A SMCJ13CA GG BG SMCJ14A SMCJ14CA GK BK SMCJ15A SMCJ15CA GM BM SMCJ16A SMCJ16CA GP BP SMCJ17A SMCJ17CA GR BR SMCJ18A SMCJ18CA GT BT SMCJ20A SMCJ20CA GV BV SMCJ22A SMCJ22CA GX BX SMCJ24A SMCJ24CA GZ BZ SMCJ26A SMCJ26CA G B SMCJ28A SMCJ28CA GG BG SMCJ30A SMCJ30CA GK BK TL: / 7-

3 LCTRICAL CHARACTRISTICS (T A =25, continued) 1 Part Number Marking V R I R V T I T V PP I PP Uni-Polar Bi-Polar Uni Bi V μa min(v) max(v) ma max(v) A SMCJ33A SMCJ33CA GM BM SMCJ36A SMCJ36CA GP BP SMCJ40A SMCJ40CA GR BR SMCJ43A SMCJ43CA GT BT SMCJ45A SMCJ45CA GV BV SMCJ48A SMCJ48CA GX BX SMCJ51A SMCJ51CA GZ BZ SMCJ54A SMCJ54CA GG BG SMCJ58A SMCJ58CA GGG BGG SMCJ60A SMCJ60CA GGK BGK SMCJ64A SMCJ64CA GGM BGM SMCJ70A SMCJ70CA GGP BGP SMCJ75A SMCJ75CA GGR BGR SMCJ78A SMCJ78CA GGT BGT SMCJ85A SMCJ85CA GGV BGV SMCJ90A SMCJ90CA GGX BGX SMCJ100A SMCJ100CA GGZ BGZ SMCJ110A SMCJ110CA GH BH SMCJ120A SMCJ120CA GHG BHG SMCJ130A SMCJ130CA GHK BHK SMCJ150A SMCJ150CA GHM BHM SMCJ160A SMCJ160CA GHP BHP SMCJ170A SMCJ170CA GHR BHR SMCJ180A SMCJ180CA GHT BHT SMCJ190A SMCJ190CA GHU BHU SMCJ200A SMCJ200CA GHV BHV SMCJ210A SMCJ210CA GHW BHW SMCJ220A SMCJ220CA GHX BHX SMCJ250A SMCJ250CA GJG BJG SMCJ300A SMCJ300CA GJK BJK TL: / 7-

4 LCTRICAL CHARACTRISTICS (T A =25, continued) 1 Part Number Marking V R I R V T I T V PP I PP Uni-Polar Bi-Polar Uni Bi V μa min(v) max(v) ma max(v) A SMCJ350A SMCJ350CA GJM BJM SMCJ400A SMCJ400CA GJP BJP SMCJ440A SMCJ440CA GJR BJR Surge waveform: 10/1000μs V R : Stand-off voltage -- maximum voltage that can be applied V BR : Breakdown voltage V C : Clamping voltage -- peak voltage measured across the suppressor at a specified I PP I R : Reverse leakage current ORDRING INORMATION RATINGS AND V I CHARACTRISTICS CURVS (T A =25, unless otherwise noted) IG.1:V- I curve characteristics (Uni-directional) I I IG.2:V- I curve characteristics (Bi-directional) I IPP VC VBR VR IRV IT V VC VBR VR IT IR IR IT VR VBR VC V IPP IPP TL: / 7-

5 150 IG.3: Pulse waveform IPPM(%IRSM) tr=10μs tr = rise time to peak value td = decay time to half value IG.4: Pulse derating curve PPP derating in percentage(%) Peak value Half value td t(ms) TA( ) SOLDRING PARAMTRS Reflow Condition Pb-ree assembly (see figure at right) -Temperature Min (T s(min) ) +150 Pre Heat -Temperature Max(T s(max) ) Time (Min to Max) (ts) secs. Average ramp up rate (Liquidus Temp (T L )to peak) 3 /sec. Max T s(max) to T L - Ramp-up Rate 3 /sec. Max Reflow -Temperature(T L )(Liquidus) Temperature(t L ) secs. Temperature Reflow condition TP TL TS(max) TS(min) ts Preheat Ramp-up tp tl Critical Zone TL to TP Ramp-down Peak Temp (T p ) +260(+0/-5) Time within 5 of actual Peak Temp (t p ) 20-40secs. 25 time to peak temperatue (t 25 to peak) Time Ramp-down Rate Time 25 to Peak Temp (T P ) 6 /sec. Max 8 min. Max Do not exceed +260 TL: / 7-

PACKAG MCHANICAL DATA B Dimensions Ref. Millimeters Inches C A Min. Max. Min. Max. A 5.75 6.25 0.226 0.246 B 6.90 7.40 0.272 0.291 H C 2.75 3.25 0.108 0.128 D G D 0.95 7.70 0.051 1.52 8.20 0.203 0.

A0 Dimensions Millimeters Inches 6.05 ± 0.3 0.238 ± 0.012 B0 W B0 C 8.31 ± 0.3 330.0 0.327 ± 0.012 13.0 A0 P1 D0 1.55 ± 0.1 1.75 ± 0.2 0.061 ± 0.004 0.069 ± 0.008 1 13.3 ± 0.3 0.524 ± 0.012 7.50 ± 0.

6 PACKAG MCHANICAL DATA B Dimensions Ref. Millimeters Inches C A Min. Max. Min. Max. A B H C D G D J K J G 0.15 H L J K DO-214AB (SMC) L TAP AND RL SPCIICATION SMC D0 P0 P2 Cathode Ref. A0 Dimensions Millimeters Inches 6.05 ± ± B0 W B0 C 8.31 ± ± A0 P1 D ± ± ± ± ± ± ± ± P ± ± P ± ± P2 W W ± ± ± ± ± ± PART No. UNIT WIGHT (g/pcs) typ. PACKAG QUANTITY TAP & RL SMCJxxA/CA SMC(DO-214AB) 3,000 13inch TL: / 7-

7 Information furnished in this document is believed to be accurate and reliable. However, Jiangsu JieJie Microelectronics Co.,Ltd assumes no responsibility for the consequences of use without consideration for such information nor use beyond it. Information mentioned in this document is subject to change without notice, apart from that when an agreement is signed, Jiangsu JieJie complies with the agreement. Products and information provided in this document have no infringement of patents. Jiangsu JieJie assumes no responsibility for any infringement of other rights of third parties which may result from the use of such products and information. This document is the fourth version which is made in 3-July This document supersedes and replaces all information previously supplied. is a registered trademark of Jiangsu JieJie Microelectronics Co.,Ltd. Copyright 2017Jiangsu JieJie Microelectronics Co.,Ltd. Printed All rights reserved. TL: / 7-

Transient Voltage Suppressors (TVS) Data Sheet

Transient Voltage Suppressors (TVS) Data Sheet Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent