400W, 5V - 188V Surface Mount Transient Voltage Suppressor

Size: px

Start display at page:

Download "400W, 5V - 188V Surface Mount Transient Voltage Suppressor"

Godfrey Lambert
6 years ago
Views:

0ps from 0 volt to BV min Typical I R less than 1μA above 10V 400 watts peak pulse power capability with a 10 / 1000 μs waveform(300w above 78V) Compliant to RoHS directive 2011/65/EU and in

4-231 V P PPM t p = 10/1000 μs waveform 400 W T J MAX 150 C Package Configuration DO-214AC (SMA) Single APPLICATIONS Switching mode power supply (SMPS) Adapters Lighting application On-board DC/DC

1 400W, 5V - 188V Surface Mount Transient Voltage Suppressor FEATURES Low profile package Ideal for automated placement Glass passivated junction Built-in strain relief Excellent clamping capability Fast response time: Typically less than 1.0ps from 0 volt to BV min Typical I R less than 1μA above 10V 400 watts peak pulse power capability with a 10 / 1000 μs waveform(300w above 78V) Compliant to RoHS directive 2011/65/EU and in accordance to WEEE 2002/96/EC Halogen-free according to IEC KEY PARAMETERS PARAMETER VALUE UNIT V WM V V BR V P PPM t p = 10/1000 μs waveform 400 W T J MAX 150 C Package Configuration DO-214AC (SMA) Single APPLICATIONS Switching mode power supply (SMPS) Adapters Lighting application On-board DC/DC converter MECHANICAL DATA Case: DO-214AC (SMA) Molding compound meets UL 94V-0 flammability rating Part no. with suffix "H" means AEC-Q101 qualified Packing code with suffix "G" means green compound (halogen-free) Moisture sensitivity level: level 1, per J-STD-020 Matte tin plated leads, solderable per J-STD-002 Meet JESD 201 class 2 whisker test Polarity: As marked Weight: 0.06g (approximately) DO-214AC (SMA) ABSOLUTE MAXIMUM RATINGS (T A = 25 C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Peak power dissipation at T A =25 C, Tp=1ms (Note 1) P PK 400 W Steady state power dissipation P D 1 W Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load Maximum instantaneous forward at 25 A for unidirectional only I FSM 40 A V F 3.5 V Operating junction temperature range T J -55 to +150 C Storage temperature range T STG -55 to +150 C Note: 1. Non-repetitive Current Pulse Per Fig. 3 and derated above TA=25 C Per Fig. 2 Devices for Bipolar Applications 1. For Bidirectional Use C or CA Suffix for Types SMAJ5.0 - Types SMAJ Electrical Characteristics Apply in Both Directions 1 Version: Q1705

2 ELECTRICAL SPECIFICATIONS (T A = 25 C unless otherwise noted) Part number Marking code Breakdown Min. V BR@I T (1) (V) Max. Test current I T (ma) Working stand-off V WM (V) Maximum reverse leakage current I R@V WM (1) (µa) Maximum peak impulse current I PPM (A) tp =10/1000 μs Maximum clamping V C@I PPM (V) tp =10/1000 μs SMAJ5.0 AD SMAJ5.0A AE SMAJ6.0 AF SMAJ6.0A AG SMAJ6.5 AH SMAJ6.5A AK SMAJ7.0 AL SMAJ7.0A AM SMAJ7.5 AN SMAJ7.5A AP SMAJ8.0 AQ SMAJ8.0A AR SMAJ8.5 AS SMAJ8.5A AT SMAJ9.0 AU SMAJ9.0A AV SMAJ10 AW SMAJ10A AX SMAJ11 AY SMAJ11A AZ SMAJ12 BD SMAJ12A BE SMAJ13 BF SMAJ13A BG SMAJ14 BH SMAJ14A BK SMAJ15 BL SMAJ15A BM SMAJ16 BN SMAJ16A BP SMAJ17 BQ SMAJ17A BR SMAJ18 BS SMAJ18A BT SMAJ20 BU SMAJ20A BV SMAJ22 BW SMAJ22A BX SMAJ24 BY SMAJ24A BZ SMAJ26 CD SMAJ26A CE SMAJ28 CF SMAJ28A CG SMAJ30 CH SMAJ30A CK SMAJ33 CL SMAJ33A CM Version: Q1705

3 ELECTRICAL SPECIFICATIONS (T A = 25 C unless otherwise noted) Part number Marking code Breakdown V BR@I T (1) (V) Uni Uni Min. Max. Test current I T (ma) Working stand-off V WM (V) Maximum reverse leakage current I R@V WM (1) (µa) Maximum peak impulse current I PPM (A) (Note 5) Maximum clamping V C@I PPM (V) (Note 5) SMAJ36 CN SMAJ36A CP SMAJ40 CQ SMAJ40A CR SMAJ43 CS SMAJ43A CT SMAJ45 CU SMAJ45A CV SMAJ48 CW SMAJ48A CX SMAJ51 CY SMAJ51A CZ SMAJ54 RD SMAJ54A RE SMAJ58 RF SMAJ58A RG SMAJ60 RH SMAJ60A RK SMAJ64 RL SMAJ64A RM SMAJ70 RN SMAJ70A RP SMAJ75 RQ SMAJ75A RR SMAJ78 RS SMAJ78A RT SMAJ85 RU SMAJ85A RV SMAJ90 RW SMAJ90A RX SMAJ100 RY SMAJ100A RZ SMAJ110 SD SMAJ110A SE SMAJ120 SF SMAJ120A SG SMAJ130 SH SMAJ130A SK SMAJ150 SL SMAJ150A SM SMAJ160 SN SMAJ160A SP SMAJ170 SQ SMAJ170A SR SMAJ188 ST SMAJ188A SS Notes: 1. Non-repetitive current pulse, per Fig. 3 and derated above TA=25 C per Fig Mounted on 5 x 5mm copper pads to each terminal\ 3. Lead temperature at TL=75 C 4. Measure on 8.3ms single half sine-wave duty cycle=4 pulses per minutes maximum 5. Peak pulse power waveform is 10/1000 μs 6. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double. 3 Version: Q1705

4 ORDERING INFORMATION PART NO. SMAJxxxx (Note 1) PART NO. SUFFIX H PACKING CODE R3 PACKING CODE SUFFIX (*) Note : 1. "xxxx" defines from 5.0V (SMAJ5.0) to 188V (SMAJ188) *: Optional available. PACKAGE SMA PACKING 1,800 / 7" Plastic reel R2 SMA 7,500 / 13" Paper reel M2 SMA 7,500 / 13" Plastic reel F3 Folded SMA 1,800 / 7" Plastic reel G F2 Folded SMA 7,500 / 13" Paper reel F4 Folded SMA 7,500 / 13" Plastic reel E3 Clip SMA 1,800 / 7" Plastic reel E2 Clip SMA 7,500 / 13" Plastic reel EXAMPLE PART NO. PACKING PACKING CODE EXAMPLE P/N PART NO. SUFFIX CODE SUFFIX SMAJ26AHR3G SMAJ26A H R3 G DESCRIPTION AEC-Q101 qualified Green compound 4 Version: Q1705

5 IFSM, PEAK FORWARD SURGE CURRENT (A) SMAJ5.0(A) - SMAJ188(A) CHARACTERISTICS CURVES (T A = 25 C unless otherwise noted) PEAK PULSE POWER(PPP) OR CURRENT (IPP) A DERATING IN PERCENTAGE (%) Fig.1 Peak Pulse Power Rating Curve Fig.2 Pulse Derating Curve PEAK PULSE CURRENT (%) PPPM, PEAK PULSE POWER, KW tp, PULSE WIDTH, (μs) NON-REPETITIVE PULSE WAVEFORM SHOWN in FIG.3 Fig.3 Claming Power Pulse Waveform Peak value I PPM Rise time tr=10μs to 100% 10/1000μs, waveform td Pulse width(td) is defined as the point where the peak current decays to 50% of I PPM t, TIME (ms) Half value-i PPM / T A, AMBIENT TEMPERATURE ( C) Fig.4 Maximum Non-repetitive Forward Surge Current ms Single Half Sine Wave NUMBER OF CYCLES AT 60 Hz 5 Version: Q1705

6 CJ, JUNCTION CAPACITANCE (pf) A SMAJ5.0(A) - SMAJ188(A) CHARACTERISTICS CURVES (T A = 25 C unless otherwise noted) Fig.5 Typical Junction Capacitance MEASURED AT ZERO BIAS f=1.0mhz Vsig=50mVp-p MEASURED at STAND-OFF VOLTAGE,Vwm V( BR), BREAKDOWN VOLTAGE (V) 6 Version: Q1705

PACKAGE OUTLINE DIMENSIONS DO-214AC (SMA) DIM Unit (mm) Unit (inch) Min Max Min Max A 1.27 1.58 0.050 0.062 B 4.06 4.60 0.160 0.181 C 2.29 2.83 0.090 0.111 D 1.99 2.50 0.078 0.098 E 0.90 1.41 0.035 0.

7 PACKAGE OUTLINE DIMENSIONS DO-214AC (SMA) DIM Unit (mm) Unit (inch) Min Max Min Max A B C D E F G H SUGGESTED PAD LAYOUT Symbol Unit (mm) Unit (inch) A B C D E MARKING DIAGRAM P/N G YW F = Marking Code = Green Compound = Date Code = Factory Code 7 Version: Q1705

8 Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC s terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. 8 Version: Q1705

SMAJ Series SMA/DO-214AC. Mechanical Data. Page <1> 29/01/10 V1.1. : Moulded plastic. : Pure tin plated lead free. : Indicated by cathode band.

SMAJ Series SMA/DO-214AC. Mechanical Data. Page <1> 29/01/10 V1.1. : Moulded plastic. : Pure tin plated lead free. : Indicated by cathode band. SMA/DO-214AC Features: For surface mounted application. Low profile package. Built-in strain relief. Glass passivated junction. Excellent clamping capability. Fast response time : typically less than 1.0ps