FAIRCHILD TVS Is Now Part of

Size: px
Start display at page:

Download "FAIRCHILD TVS Is Now Part of"

Transcription

1 FARCHLD TVS s Now Part of To learn more about Taiwan Semiconductor, please visit our website at Please note: The acquisition of this portfolio aligns with our strategy to expand in power semiconductor applications while strengthening our core circuit protection business. All of the Fairchild orderable part numbers will remain unchanged in order to maintain consistency with our customers. For more information regarding this acquisition please refer to ON Semi / Fairchild TVS Acquisition Q&A

2 1500 Watt Transient Voltage Suppressors Features Glass-Passivated Junction 1500 W Peak Pulse Power Capability on 10/0 μs Waveform. Excellent Clamping Capability Low-ncremental Surge Resistance Fast Response Time: Typically Less than 1.0 ps from 0 V to BV Minimum for Unidirectional and 5.0 ns for Bidirectional Typical R Less than 1.0 μa Above 10 V UL Certificate #E UL94V-0 Flammability Classification Absolute Maximum Ratings SMC/DO-214AB Band denotes cathode on unidirectional devices only. No band on bi-directional devices. Bi-directional types have CA suffix where electrical characteristics apply in both directions suitable for bi-directional applications. Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. n addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at T A = 25 C unless otherwise noted. Symbol Parameter Value Unit P PPM Peak Pulse Power Dissipation on 10/0 μs Waveform 1500 W PPM Peak Pulse on 10/0 μs Waveform See table A FSM Non-Repetitive Peak Forward Surge Superimposed on Rated Load (JEDEC Method) (1) 200 A T STG Storage Temperature Range -55 to 150 C T J Operating Junction Temperature 150 C Note: 1. Measured on 8.3 ms single half-sine wave or equivalent square wave: duty cycle = 4 pulses per minute maximum.

3 Electrical Characteristics Values are at T A = 25 C unless otherwise noted. Reverse Breakdown Clamping Reverse Uni-Directional Part Stand-Off Voltage Test Peak Pulse Voltage Leakage Bi-Directional (C) Marking (2) Voltage V BR (V) at Device V RWM (V) T (ma) PPM at V V C (V) PPM (A) RWM Min. Max. R (μa) (3) SMCJ5V0(C)A GDE SMCJ6V0(C)A GDG SMCJ6V5(C)A GDK SMCJ7V0(C)A GDM SMCJ7V5(C)A GDP SMCJ8V0(C)A GDR SMCJ8V5(C)A GDT SMCJ9V0(C)A GDV SMCJ10(C)A GDX SMCJ11(C)A GDZ SMCJ12(C)A GEE SMCJ13(C)A GEG SMCJ14(C)A GEK SMCJ15(C)A GEM SMCJ16(C)A GEP SMCJ17(C)A GER SMCJ18(C)A GET SMCJ20(C)A GEV SMCJ22(C)A GEX SMCJ24(C)A GEZ SMCJ26(C)A GFE SMCJ28(C)A GFG SMCJ30(C)A GFK SMCJ33(C)A GFM SMCJ36(C)A GFP SMCJ40(C)A GFR SMCJ43(C)A GFT SMCJ45(C)A GFV SMCJ48(C)A GFX SMCJ51(C)A GFZ SMCJ54(C)A GGE SMCJ58(C)A GGG SMCJ60(C)A GGK SMCJ64(C)A GGM SMCJ70(C)A GGP SMCJ75(C)A GGR SMCJ78(C)A GGT Notes: 2. Color band denotes cathode on unidirectional devices only. No color band on bidirectional devices. 3. For bidirectional parts with V RWM < 10 V, the R max limit is doubled. 2

4 Electrical Characteristics (Continued) Values are at T A = 25 C unless otherwise noted. Reverse Breakdown Clamping Reverse Uni-Directional Part Stand-Off Voltage Test Peak Pulse Voltage Leakage Bi-Directional (C) Marking (2) Voltage V BR (V) at Device V RWM (V) T (ma) PPM at V V C (V) PPM (A) RWM Min. Max. R (μa) (3) SMCJ85(C)A GGV SMCJ90(C)A GGX SMCJ(C)A GGZ SMCJ110(C)A GHE SMCJ120(C)A GHG SMCJ130(C)A GHK SMCJ150(C)A GHM SMCJ160(C)A GHP SMCJ170(C)A GHR Notes: 2. Color band denotes cathode on unidirectional devices only. No color band on bidirectional devices. 3. For bidirectional parts with V RWM < 10 V, the R max limit is doubled. 3

5 Typical Performance Characteristics PULSE POWER (kw) PEAK PULSE CURRENT (%) 10 1 T A = 25 º C PULSE WDTH (ms) Figure 1. Peak Pulse Power Rating Curve tf = 10μsec Peak Value ppm td T A = 25 º C Pulse Width (td) is Defined as the Point Where the Peak Decays to 50% of pp Half Value-pp 2 10/0μsec Waveform as Defined by R.E.A. e-kt TME (ms) Figure 3. Pulse Waveform PULSE POWER (%) CAPACTANCE (pf) AMBENT TEMPERATURE ( º C) Figure 2. Pulse Derating Curve Measured at Stand-Off Voltage (V ) RWM REVERSE VOLTAGE (V) Figure 4. Junction Capacitance T A = 25 º C f = 1.0 MHz Visg = 50m Vp-p Measured at Zero Bias FSM, PEAK FORWARD SURGE CURRENT (A) 8.3ms Single Half Sine Wave UNDRECTONAL ONLY NUMBER OF CYCLES AT 60 Hz Figure 5. Non-Repetitive Surge 4

6 Physical Dimension Figure 6. 2-LEAD, SMC, JEDEC DO-214, VARATON AB (ACTVE) 5

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Features Glass passivated junction. 10 W Peak Pulse Power capability on

More information

SMCJ5V0(C)A - SMCJ170(C)A 1500 Watt Transient Voltage Suppressors

SMCJ5V0(C)A - SMCJ170(C)A 1500 Watt Transient Voltage Suppressors SMCJ5V0(C)A - SMCJ170(C)A 1500 Watt Transient Suppressors Features Glass-Passivated Junction 1500 W Peak Pulse Power Capability on 10/0 μs Waveform. Excellent Clamping Capability Low-Incremental Surge

More information

FAIRCHILD TVS Is Now Part of

FAIRCHILD TVS Is Now Part of FAIRCHILD TVS Is Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in

More information

FAIRCHILD TVS Is Now Part of

FAIRCHILD TVS Is Now Part of FARCHLD TVS s Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in power

More information

FAIRCHILD TVS Is Now Part of

FAIRCHILD TVS Is Now Part of FAIRCHILD TVS Is Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in

More information

Transient Voltage Suppressors (TVS) Data Sheet

Transient Voltage Suppressors (TVS) Data Sheet Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent

More information

SZ1SMC5.0AT3G Series. TVS Diodes. Surface Mount > 1500W > SZ1SMC5.0AT3G Series. Cathode. Anode. Uni-directional. Description

SZ1SMC5.0AT3G Series. TVS Diodes. Surface Mount > 1500W > SZ1SMC5.0AT3G Series. Cathode. Anode. Uni-directional. Description SZ1SMC5.0AT3G Series Pb Description The SZ1SMC5.0AT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high

More information

SMCG5.0A thru SMCG188CA. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.

SMCG5.0A thru SMCG188CA. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.0 V to 188 V V BR (uni-directional) 6.4 V to 231 V V BR (bi-directional) 6.4 V to 231 V P PPM 1500 W P D 6.5 W I FSM

More information

SMCJ Series. 1500W Surface Mount Transient Voltage Suppressors SMC SHANGHAI SEMITECH SEMICONDUCTOR CO., LTD. Features. Mechanical Characteristics

SMCJ Series. 1500W Surface Mount Transient Voltage Suppressors SMC SHANGHAI SEMITECH SEMICONDUCTOR CO., LTD. Features. Mechanical Characteristics 4 SHANGHAI SEMITECH SEMICONDUCTOR CO., LTD SMCJ Series 1500W Surface Mount Transient Suppressors Features l Peak power dissipation 1500W @10 x 1000 us Pulse l Low profile package. l Excellent clamping

More information

Transient Voltage Suppression Diodes: SMCJ Series SMD Type 1500 W

Transient Voltage Suppression Diodes: SMCJ Series SMD Type 1500 W Features 1. For surface mounted applications 2. RoHS compliant and halogen-free 3. Reliable low cost construction utilizing molded plastic technique 4. Glass passivated chip junction 5. Both bi-directional

More information

1500W, 5V - 170V Surface Mount Transient Voltage Suppressor

1500W, 5V - 170V Surface Mount Transient Voltage Suppressor 1500W, 5V - 170V Surface Mount Transient Voltage Suppressor FEATURES Low profile package Ideal for automated placement Glass passivated junction Built-in strain relief Excellent clamping capability Fast

More information

Features. Applications. Agency Approval. Mechanical and Physical Data. Maximum Ratings and Thermal Characteristics. Part Number Code SMCJ C A -

Features. Applications. Agency Approval. Mechanical and Physical Data. Maximum Ratings and Thermal Characteristics. Part Number Code SMCJ C A - Features Plastic package, excellent insulation strength. Glass passivated chip junction in SMC package. Excellent voltage clamping capability. Low Zener impedance. 1500W peak pulse power capability on

More information

- 1500W > SMCJ5.0A/CA~440A/CA

- 1500W > SMCJ5.0A/CA~440A/CA Transient Voltage Suppressors Diodes Surface Mount - 5W > SMCJ5.A/CA~44A/CA Series The SMCJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by

More information

Zetron Research. Transient Voltage Suppression Diodes Surface Mount 1500W > SMCJ series. SMCJ Series. SMCJ Series

Zetron Research. Transient Voltage Suppression Diodes Surface Mount 1500W > SMCJ series. SMCJ Series. SMCJ Series RoHS Agency Approvals AGENCY Parameter Symbol Value Unit Peak Pulse Power Dissipation at T A =25ºC by xμs waveform (Fig.)(Note ), (Note 2) P PPM 5 W Power Dissipation on infinite heat sink at T A =5 O

More information

TV15C5V0-G Thru. TV15C441-G

TV15C5V0-G Thru. TV15C441-G TV55V-G Thru. TV544-G Working Peak : 5. to 44 Volts Power Dissipation: 5Watts RoHS Device Features - Glass passivated chip. - 5W peak pulse power capability with a /µs waveform, repetitive rate (duty cycle):.%

More information

ATV15C5V0-G Thru. ATV15C441-G

ATV15C5V0-G Thru. ATV15C441-G TV55V-G Thru. TV544-G Working Peak : 5. to 44 Volts Power Dissipation: 5Watts RoHS Device Features - Glass passivated chip. - 5W peak pulse power capability with a /µs waveform, repetitive rate (duty cycle):.%

More information

Micro Commercial Components Marilla Street Chatsworth. Watts

Micro Commercial Components Marilla Street Chatsworth. Watts 20736 Marilla Street Chatsworth!"# $%!"# SMCJ5.0(C)A THRU SMCJ440(C)A Features Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) For surface mount application

More information

ATV15C5V0-HF Thru. ATV15C441-HF Working Peak Reverse Voltage: 5.0 to 440 Volts Power Dissipation: 1500Watts RoHS Device Halogen Free

ATV15C5V0-HF Thru. ATV15C441-HF Working Peak Reverse Voltage: 5.0 to 440 Volts Power Dissipation: 1500Watts RoHS Device Halogen Free TV55V-HF Thru. TV544-HF Working Peak : 5. to 44 Volts Power Dissipation: 5Watts RoHS Device Halogen Free Features - Glass passivated chip. - 5W peak pulse power capability with a /µs waveform, repetitive

More information

SMCJ-HR Series. TVS Diodes Surface Mount 1500W > SMCJ-HR Series. Description. Uni-directional

SMCJ-HR Series. TVS Diodes Surface Mount 1500W > SMCJ-HR Series. Description. Uni-directional SMCJ-HR Series RoHS Pb e3 Uni-directional Bi-directional Description The SMCJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced

More information

SMC5K10A thru SMC5K85A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.

SMC5K10A thru SMC5K85A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 11.1 V to 104 V V WM 10 V to 85 V P PPM 5000 W T J max. 150 C Polarity Uni-directional Package TYPICAL APPLICATIONS Use

More information

SMCJ Series. Transient Voltage Suppression Diodes Surface Mount 1500W > SMCJ series. Description. Uni-directional

SMCJ Series. Transient Voltage Suppression Diodes Surface Mount 1500W > SMCJ series. Description. Uni-directional SMCJ Series RoHS Uni-directional Bi-directional Description The SMCJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient

More information

1.5SMCJ5.0A-AU~1.5SMCJ70CA-AU

1.5SMCJ5.0A-AU~1.5SMCJ70CA-AU SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR PEAK PULSE POWER 1500 Watt STAND-OFF VOLTAGE 5 to 70 Volt Recongnized File # E2467 FEATURES For surface mounted applications in order to optimize board space.

More information

SMCJ Series. TVS Diodes Surface Mount 1500W > SMCJ series. Description. Uni-directional

SMCJ Series. TVS Diodes Surface Mount 1500W > SMCJ series. Description. Uni-directional RoHS Pb e3 Uni-directional Bi-directional Description The SMCJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient

More information

1SMC5.0AT3G Series, SZ1SMC5.0AT3G Series Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional*

1SMC5.0AT3G Series, SZ1SMC5.0AT3G Series Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional* .0AT3G Series, SZ.0AT3G Series 00 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional* The series is designed to protect voltage sensitive components from high voltage, high energy transients.

More information

SMCG-HR Series. Transient Voltage Suppression Diodes Surface Mount 1500W > SMCG-HR series

SMCG-HR Series. Transient Voltage Suppression Diodes Surface Mount 1500W > SMCG-HR series SMCG-HR Series RoHS Pb e3 Description The SMCG-HR series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

More information

Transient Voltage Suppressors. SMCJ Series. Circuit Protection System ELECTRONICS

Transient Voltage Suppressors. SMCJ Series. Circuit Protection System ELECTRONICS ELECTRONICS Transient Voltage Suppressors SMCJ Series Features UNI Low profile package Very fast response time Halogen free and RoHS compliant Low incremental surge resistance Typical IR less than 1µA

More information

SMPC5.0A thru SMPC36A, SMPC22AN thru SMPC85AN Surface Mount TRANSZORB Transient Voltage Suppressors

SMPC5.0A thru SMPC36A, SMPC22AN thru SMPC85AN   Surface Mount TRANSZORB Transient Voltage Suppressors Surface Mount TRANSZORB Transient Voltage Suppressors DESIGN SUPPORT TOOLS Models Available SMPCxxA SMPCxxAN esmp Series 2 SMPC (TO-277A) A Anode K Cathode 1 Cathode 1 Cathode 2 Anode 1 Anode 2 click logo

More information

Transient Voltage Suppressors (TVS) Data Sheet

Transient Voltage Suppressors (TVS) Data Sheet Transient Suppressors (TVS) Data Sheet Features Glass passivated junction Low zener impedance Excellent clamping capability 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty

More information

SMBJ / SMCJ Series. Surface Mount Voltage Suppressors. Transient Voltage Suppressor. Dimension Table. Mechanical Data. Page <1> 03/02/12 V1.

SMBJ / SMCJ Series. Surface Mount Voltage Suppressors. Transient Voltage Suppressor. Dimension Table. Mechanical Data. Page <1> 03/02/12 V1. Surface Mount Suppressors Transient Suppressor Features: For surface mounted applications in order to optimise board space Low profile package Built-in strain relief Glass passivated junction Excellent

More information

1.5KE6.8(C)A - 1.5KE440(C)A

1.5KE6.8(C)A - 1.5KE440(C)A 1.5KE6.8(C)A - 1.5KE440(C)A Features Glass passivated junction. 1500W Peak Pulse Power capability at 1.0 ms. Excellent clamping capability. Low incremental surge resistance. Fast response time; typically

More information

ICTE5.0 THRU ICTE15C SERIES

ICTE5.0 THRU ICTE15C SERIES ICTE5.0 THRU ICTE15C SERIES TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR Stand-off Voltage - 5.0 to 15 Volts Peak Pulse Power - Watts Case Style 1.5KE 1.00 (25.4) MIN. 0.205 (5.207) 0.190 (4.826) DIA. 0.375

More information

Micro Commercial Components Marilla Street Chatsworth C/ W C/ W

Micro Commercial Components Marilla Street Chatsworth C/ W C/ W Features Mechanical Data Terminals: solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes positive end( cathode) except Standard packaging: 16mm tape per ( EIA 481). Weight: 0.007 ounce,

More information

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Transient Suppressors Features Glass passivated junction. 600W Peak Pulse

More information

Transient Voltage Suppressors (TVS) Data Sheet

Transient Voltage Suppressors (TVS) Data Sheet Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent

More information

JIEJIE MICROELECTRONICS CO., Ltd

JIEJIE MICROELECTRONICS CO., Ltd JIJI MICROLCTRONICS CO., Ltd SMCJ Series 1500W Transient Voltage Suppressor Rev.4 DSCRIPTION: TVS diodes can be used in a wide range of applications which like consumer electronic products, automotive

More information

Distributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. P6KE6V8(C)A - P6KE4(C)A 6W TRANSIENT VOLTAGE SUPPRESSOR Features 6W Peak Pulse

More information

PAM31DOAB Series 1500 WATT TVS COMPONENT APPLICATIONS DO-214AB PACKAGE MECHANICAL CHARACTERISTICS FEATURES PIN CONFIGURATIONS.

PAM31DOAB Series 1500 WATT TVS COMPONENT APPLICATIONS DO-214AB PACKAGE MECHANICAL CHARACTERISTICS FEATURES PIN CONFIGURATIONS. 15 WATT TVS COMPONENT APPLICATIONS Automotive DO-214AB PACKAGE FEATURES AEC-Q11 Qualified UL File Recognition #E28219 Compatible with IEC 6-4-2 (ESD): Level 4 - Air 15kV, Contact 8kV Compatible with IEC

More information

DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY 1.0SMB series

DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY 1.0SMB series Product specification November 5, 28 V. DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY.SMB series RoHS compliant & Halogen free Transient Suppressors.SMB 2 Transient Suppressors (TVS) Data

More information

Transient Suppression Diodes For General Purpose Use

Transient Suppression Diodes For General Purpose Use SMAJ SMCJ SMBJ GENERAL DESCRIPTION The SMAJ, SMBJ, and SMCJ Series are a popular format of general purpose transient voltage suppression diodes. They are based on the low leakage, high reliability, but

More information

Green. Bottom View. Top View. Part Number Qualification Case Packaging SMCJXX(C)AQ-13-F* Automotive SMC 3000/Tape & Reel

Green. Bottom View. Top View. Part Number Qualification Case Packaging SMCJXX(C)AQ-13-F* Automotive SMC 3000/Tape & Reel Green J14()AQ J36()AQ 1,500W SURFAE MOUNT AUTOMOTIVE TRANSIENT VOLTAGE SUPPRESSOR Product Summary (@T A = +25 ) P PK I FSM (A) V RWM (V) PM (AV) 1500W 200 14-36 5W Features and Benefits 1500W Peak Pulse

More information

CD214C Transient Voltage Suppressor Diode Series

CD214C Transient Voltage Suppressor Diode Series *RoHS OMPLINT eatures Lead free RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 15 watts Model 214 is currently available, although not recommended for new designs.

More information

P6KE SERIES Taiwan Semiconductor

P6KE SERIES Taiwan Semiconductor 600W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps

More information

Surface Mount Transient Voltage Suppressors (TVS)

Surface Mount Transient Voltage Suppressors (TVS) Description The 1.5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional

More information

P4KE SERIES Taiwan Semiconductor

P4KE SERIES Taiwan Semiconductor 400W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 400W surge capability at 10 / 1000 μs waveform - Fast response time: Typically less than

More information

SMCJ Transient Voltage Suppressor Diode Series

SMCJ Transient Voltage Suppressor Diode Series *RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 15 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage

More information

SA SERIES Taiwan Semiconductor

SA SERIES Taiwan Semiconductor 500W, 5V - 170V Transient Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from

More information

30KP SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A =25 C unless otherwise specified

30KP SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A =25 C unless otherwise specified 3KP SERIES 3W TRANSIENT VOLTAGE SUPPRESSOR Pb Features Glass Passivated Die Construction 3W Peak Pulse Power Dissipation 8V 88V Standoff Voltage A B A Uni- and Versions Available Excellent Clamping Voltage

More information

SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM T J, T STG

SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM T J, T STG SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4

More information

30KP Series 30000W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR R-6 PACKAGE WILLAS ELECTRONIC CORP. R-6 (Cathode band Only Uui-polarity product)

30KP Series 30000W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR R-6 PACKAGE WILLAS ELECTRONIC CORP. R-6 (Cathode band Only Uui-polarity product) 3W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR 3KP Series 1.(25.4)MIN..36(9.14).338(8.6) 1.(25.4)MIN. R-6 (Cathode band Only Uui-polarity product).52(1.32).47(1.2) Dimensions in inches and (millimeters) DIA..36(9.14).338(8.6)

More information

P6SMB Transient Voltage Suppressor Diode Series

P6SMB Transient Voltage Suppressor Diode Series P6SMB Transient Voltage Suppressor Diode Series General Information The P6SMB series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping

More information

ICTE5 thru ICTE18C, 1N6373 thru 1N6386. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.

ICTE5 thru ICTE18C, 1N6373 thru 1N6386. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. TRANSZORB Transient Voltage Suppressors Case Style 1.5KE PRIMARY CHARACTERISTICS V WM 5. V to 18 V V BR (uni-directional) 6. V to 21.2 V V BR (bi-directional) 9.2 V to 21.2 V P PPM 1 W P D 6.5 W I FSM

More information

5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor

5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor 5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor Description The 5KP Series are designed specifically to protect sensitive Uni-directional electronics equipment from voltage transients induced

More information

M C C. SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A. Features. Transient Voltage Suppressor 6.8 to 550 Volts 1500 Watt.

M C C.  SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A. Features. Transient Voltage Suppressor 6.8 to 550 Volts 1500 Watt. omponents 20736 Marilla Street Chatsworth!"# $%!"# SMCJ1.5KE6.8(C)A THRU SMCJ1.5KE550(C)A Features For surface mount applicationsin in order tooptimize board space Lead Free Finish/Rohs Compliant (Note1)

More information

1.5SMCJ SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A =25 C unless otherwise specified

1.5SMCJ SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A =25 C unless otherwise specified .SMCJ SERIES W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Pb Features Glass Passivated Die Construction W Peak Pulse Power Dissipation B.V 44V Standoff Voltage Uni- and Bi- Versions Available D Excellent

More information

SMCJ5.0CA Thru SMCJ170CA

SMCJ5.0CA Thru SMCJ170CA Transient Suppressors TVS Diodes - 1500W > SMCJ Series SMCJ5.0CA Thru SMCJ170CA Description The SMCJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced

More information

1.5SMCxxAT3G. TVS Diodes. Surface Mount > 1500W > 1.5SMCxxAT3G. Cathode. Anode. Uni-directional. Description

1.5SMCxxAT3G. TVS Diodes. Surface Mount > 1500W > 1.5SMCxxAT3G. Cathode. Anode. Uni-directional. Description 1.5SMCxxAT3G Pb Description The 1.5SMCxxAT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability,

More information

SMCJ Transient Voltage Suppressor Diode Series

SMCJ Transient Voltage Suppressor Diode Series *RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 495 volts Power issipation: 15 watts pplications I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge SMJ Transient Voltage

More information

1.5SMC6.8AT3G. TVS Diodes. Surface Mount > 1500W > 1.5SMC6.8AT3G. Bi-directional. Cathode. Anode. Uni-directional. Description

1.5SMC6.8AT3G. TVS Diodes. Surface Mount > 1500W > 1.5SMC6.8AT3G. Bi-directional. Cathode. Anode. Uni-directional. Description 1.5SMC6.8AT3G Pb Description The 1.5SMC6.8AT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge

More information

BZW04 SERIES Taiwan Semiconductor

BZW04 SERIES Taiwan Semiconductor W, 5.8V - 376V Transient Voltage Suppressor BZW4 SERIES FEATURES - Excellent clamping capability - Low impedance surge resistance - W surge capability at / μs waveform - Very fast response time - Typical

More information

Transient Voltage Suppression Diodes Axial Leaded 600W > P6KE series

Transient Voltage Suppression Diodes Axial Leaded 600W > P6KE series Axial Leaded 6W > P6KE series RoHS Pb Description The is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

More information

P6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS

P6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.  FEATURES PRIMARY CHARACTERISTICS TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V P PPM 600 W P D 5.0 W I FSM (uni-directional

More information

Rev. 02

Rev. 02 PRIMARY CHARACTERISTICS SMB(DO-214AA) PACKAGE P PP V BR I PP V C 600W 6.8V~600V 57.14A~0.72A 10.5V~828V Body Marking :Please See Page 3 EX : SM 12A EX : SM 12CA T J,Max 150 12 A 12 C UNI- POLAR BI-POLAR

More information

Sales: Technical: Fax:

Sales: Technical: Fax: DATA SHEET Order code Manufacturer code Description 47-4344 n/a SMCJ33CA TVS DIODE BIDIRECTIONAL SMC (RC 47-4346 n/a SMCJ40CA TVS DIODE BIDIRECTIONAL SMC (RC 47-4290 n/a SMCJ5.0A TVS DIODE UNIDIRECTIONAL

More information

5KP8.5A thru 5KP188A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES TYPICAL APPLICATIONS

5KP8.5A thru 5KP188A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.  FEATURES TYPICAL APPLICATIONS TRANSZORB Transient Voltage Suppressors P6 PRIMARY CHARACTERISTICS V WM 8.5 V to 188 V V BR 9.4 V to 231 V P PPM 5 W P D 8. W I FSM 5 A T J max. 175 C Polarity Uni-directional Package P6 FEATURES P6 glass

More information

P6SMB Series. TVS Diodes Surface Mount 600W > P6SMB series. Description. Uni-directional

P6SMB Series. TVS Diodes Surface Mount 600W > P6SMB series. Description. Uni-directional RoHS Pb e3 Uni-directional Description Bi-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient

More information

P6SMB11AT3G Series. TVS Diodes. Surface Mount > 600W > P6SMB11AT3G Series. Bi-directional. Cathode. Anode. Uni-directional.

P6SMB11AT3G Series. TVS Diodes. Surface Mount > 600W > P6SMB11AT3G Series. Bi-directional. Cathode. Anode. Uni-directional. P6SMB11AT3G Series Pb Description The P6SMB11AT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge

More information

Transient Voltage Suppressors (TVS) Data Sheet

Transient Voltage Suppressors (TVS) Data Sheet Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Glass passivated junction Low inductance Excellent clamping capability

More information

Transient Voltage Suppression Diodes. Surface Mount 400W > P4SMA series. Features. less than 1μA when V BR. Applications. Additional Infomarion

Transient Voltage Suppression Diodes. Surface Mount 400W > P4SMA series. Features. less than 1μA when V BR. Applications. Additional Infomarion P4SMA Series RoHS Pb e3 Uni-directional Bi-directional Description The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other

More information

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt DEVICES FOR BIPOLAR APPLICATIONS

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt DEVICES FOR BIPOLAR APPLICATIONS GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt BREAK DOWN VOLTAGE 6.8 to 550 Volt FEATURES Recongnized File # E210467 Plastic package has Underwriters Laboratory Flammability Classification

More information

5KP-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 5000W > 5KP-HRA series. Description. Uni-directional

5KP-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 5000W > 5KP-HRA series. Description. Uni-directional 5KP-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals AGENCY FILE NUMBER E28662/E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 5 W

More information

30KPA-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 30000W > 30KPA-HRA series. Descriptios. Uni-directional

30KPA-HRA Series. Transient Voltage Suppression Diodes Axial Leaded 30000W > 30KPA-HRA series. Descriptios. Uni-directional 3KPA-HRA Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) P PPM 3 W Steady State Power Dissipation

More information

P4KE6.8A thru P4KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS

P4KE6.8A thru P4KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.   FEATURES PRIMARY CHARACTERISTICS TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 54 V V BR bi-directional 6.8 V to 44 V P PPM 4 W P D 1.5 W I FSM (uni-directional only)

More information

DEVICES FOR BIPOLAR APPLICATIONS

DEVICES FOR BIPOLAR APPLICATIONS SEMICONDUCTOR TECHNICAL SPECIFICATION GPP TRANSIENT VOLTAGE SUPPRESSOR 15 WATT PEAK POWER 5. WATTS STEADY STATE TVS 1.5KE SERIES FEATURES * Plastic package has underwriters laboratory certificate * Glass

More information

BZW06 SERIES Taiwan Semiconductor

BZW06 SERIES Taiwan Semiconductor 600W, 3V - 376V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at / 0 μs waveform - Fast response time: Typically less than.0ps from

More information

MCC. P6KE6.8 THRU P6KE540(C)A. Features. Maximum Ratings APPLICATION DO WATTS TRANSIENT VOLTAGE SUPPRESSOR 6.

MCC.  P6KE6.8 THRU P6KE540(C)A. Features. Maximum Ratings APPLICATION DO WATTS TRANSIENT VOLTAGE SUPPRESSOR 6. Features omponents 2736 Marilla Street Chatsworth!"# $%!"# Economical series Available in both unidirectional and bidirectionalconstruction and suffix"c" designates bidirectional type Lead Free Finish/Rohs

More information

Transient Voltage Suppressors (TVS) Data Sheet

Transient Voltage Suppressors (TVS) Data Sheet Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Glass passivated junction Low inductance Excellent clamping capability

More information

Transient Voltage Suppressors (TVS) Data Sheet

Transient Voltage Suppressors (TVS) Data Sheet Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent

More information

P6SMB6.8AT3G Series, SZP6SMB6.8AT3G Series. 600 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional*

P6SMB6.8AT3G Series, SZP6SMB6.8AT3G Series. 600 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional* P66.8AT3G Series, SZP66.8AT3G Series 600 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional* The series is designed to protect voltage sensitive components from high voltage, high energy

More information

P4SMA-E Series. TVS Diodes Surface Mount 400W > P4SMA-E series Series. Description. Uni-directional

P4SMA-E Series. TVS Diodes Surface Mount 400W > P4SMA-E series Series. Description. Uni-directional P4SMA-E Series RoHS Pb e3 Description The P4SMA-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

More information

Transient Voltage Suppressors (TVS) Data Sheet

Transient Voltage Suppressors (TVS) Data Sheet Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent

More information

Transient Voltage Suppression Diodes Axial Leaded 500W > SA series

Transient Voltage Suppression Diodes Axial Leaded 500W > SA series Axial Leaded 5W > SA series RoHS b Description The is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Agency

More information

P6SMB Series. Transient Voltage Suppression Diodes. Surface Mount 600W > P6SMB series. Description

P6SMB Series. Transient Voltage Suppression Diodes. Surface Mount 600W > P6SMB series. Description P6SMB Series RoHS Pb e3 Description Uni-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient

More information

P6SMB-E Series. TVS Diodes Surface Mount 600W > P6SMB-E series Series. Description. Uni-directional

P6SMB-E Series. TVS Diodes Surface Mount 600W > P6SMB-E series Series. Description. Uni-directional P6SMB-E Series RoHS Pb e3 Description The P6SMB-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

More information

SA5.0A thru SA170CA. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS

SA5.0A thru SA170CA. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.   FEATURES PRIMARY CHARACTERISTICS TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.0 V to 170 V V BR (uni-directional) 6.4 V to 209 V V BR (bi-directional) 6.4 V to 209 V P PPM 500 W P D 3.0 W I FSM

More information

15KPA Series. Transient Voltage Suppression Diodes. Axial Leaded 15000W > 15KPA series. Descriptions. Uni-directional

15KPA Series. Transient Voltage Suppression Diodes. Axial Leaded 15000W > 15KPA series. Descriptions. Uni-directional 5KPA Series RoHS Pb e3 Descriptions Uni-directional The 5KPA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage

More information

5KP Series. Transient Voltage Suppression Diodes. Axial Leaded 5 kw > 5KP series. Description

5KP Series. Transient Voltage Suppression Diodes. Axial Leaded 5 kw > 5KP series. Description 5KP Series RoHS Pb e3 Description Uni-directional The 5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage

More information

SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM. I 2 t 6.64 A 2 /Sec T J, T STG

SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER 1.0 WATTS STEADY STATE SYMBOL IPPM P M(AV) I FSM. I 2 t 6.64 A 2 /Sec T J, T STG SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATTS STEADY STATE TVS P4FMAJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4

More information

500W Glass Passivated Junction Transient Voltage Suppressor. JEDEC DO-15 molded plastic body over passivated junction

500W Glass Passivated Junction Transient Voltage Suppressor. JEDEC DO-15 molded plastic body over passivated junction Glass Passivated Junction Transient Voltage Suppressor SA5.0A -SA180CA 500W Glass Passivated Junction Transient Voltage Suppressor Features Stand-off voltage from 5.0 to 180 volts Glass passivated junction

More information

MCC. P6KE6.8 THRU. Features. Maximum Ratings APPLICATION DO WATTS TRANSIENT VOLTAGE SUPPRESSOR 6.

MCC.  P6KE6.8 THRU. Features. Maximum Ratings APPLICATION DO WATTS TRANSIENT VOLTAGE SUPPRESSOR 6. Features Epoxy meets UL 94 V- flammability rating Moisture Sensitivity Level 1 omponents 2736 Marilla Street Chatsworth!"# $%!"# and suffix"c" designates bidirectional type Lead Free Finish/Rohs Compliant

More information

TP6KE Series. TVS Diodes Axial Leaded 600W > TP6KE series

TP6KE Series. TVS Diodes Axial Leaded 600W > TP6KE series TP6KE Series RoHS Pb e3 AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) 6 W Steady State Power Dissipation

More information

SMB10J SERIES Taiwan Semiconductor

SMB10J SERIES Taiwan Semiconductor 0W Surface Mount Transient Voltage Suppressor FEATURES - Low profile package - Ideal for automated placement - Glass passivated junction - Excellent clamping capability - Fast response time: typically

More information

1SMA5.0AT3G Series. TVS Diodes. Surface Mount > 400W > 1SMA5.0AT3G Series. Bi-directional. Cathode. Anode. Uni-directional.

1SMA5.0AT3G Series. TVS Diodes. Surface Mount > 400W > 1SMA5.0AT3G Series. Bi-directional. Cathode. Anode. Uni-directional. SMA5.0AT3G Series Pb Description The SMA5.0AT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge

More information

Transient Voltage Suppression Diodes Axial Leaded 1500W > TP1.5KE series. Features 1500 W 6.5 W 200 A 3.5 V. -55 to 150 C. -55 to 175 C 15 C/W 75 C/W

Transient Voltage Suppression Diodes Axial Leaded 1500W > TP1.5KE series. Features 1500 W 6.5 W 200 A 3.5 V. -55 to 150 C. -55 to 175 C 15 C/W 75 C/W TP.5KE Series RoHS Pb e3 Description The TP.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

More information

DEVICES FOR BIPOLAR APPLICATIONS. For Bidirectional use C or CA suffix for types 3KP5.0 thru 3KP110 Electrical characteristics apply in both direction

DEVICES FOR BIPOLAR APPLICATIONS. For Bidirectional use C or CA suffix for types 3KP5.0 thru 3KP110 Electrical characteristics apply in both direction TVS 3KP SERIES GPP TRANSIENT VOLTAGE SUPPRESSOR 3 WATT PEAK POWER 8. WATTS STEADY STATE FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 3 watt surage capability

More information

ESD9N12BA ESD9N12BA. Descriptions. Features. Applications. Order information. http//:

ESD9N12BA ESD9N12BA. Descriptions. Features. Applications. Order information. http//: 1-Line, Bi-directional, Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The ES9N12BA is a TVS (Transient Voltage Suppressor) designed to protect sensitive electronic components which

More information

Surface Mount TRANSZORB Transient Voltage Suppressors

Surface Mount TRANSZORB Transient Voltage Suppressors Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.8 V to 220 V V WM 5.8 V to 188 V P PPM 600 W P D 5.0 W I FSM (uni-directional only) A T J max. 150 C Polarity Uni-directional,

More information

Surface Mount TRANSZORB Transient Voltage Suppressors

Surface Mount TRANSZORB Transient Voltage Suppressors Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM (uni-directional) 5.8 V to 459 V V WM (bi-directional) 5.8 V to 185 V V BR (uni-directional) 6.8 V to 540 V V BR (bi-directional)

More information

SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 1500 WATT PEAK POWER 6.5 WATTS STEADY STATE

SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 1500 WATT PEAK POWER 6.5 WATTS STEADY STATE SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 15 WATT PEAK POWER 6.5 WATTS STEADY STATE TVS TFMCJ SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 15

More information

1N6267A Series Watt Zener Transient Voltage Suppressors. Unidirectional*

1N6267A Series Watt Zener Transient Voltage Suppressors. Unidirectional* 500 Watt Zener Transient Voltage Suppressors Unidirectional* These devices are designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability,

More information

P6KE-G Series. 600W Transient Voltage Suppressor. Stand-off Voltage: 6.8 ~ 600V Power Dissipation: 600 Watts RoHS Device. Features.

P6KE-G Series. 600W Transient Voltage Suppressor. Stand-off Voltage: 6.8 ~ 600V Power Dissipation: 600 Watts RoHS Device. Features. P6KE-G Series Stand-off Voltage: 6.8 ~ 6V Power Dissipation: 6 Watts RoHS Device Features -Plastic package has underwriters laboratory flammability classification 94V- -6W, surge capability at ms. -Excellent

More information