GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt DEVICES FOR BIPOLAR APPLICATIONS
|
|
|
- Anne Beasley
- 5 years ago
- Views:
Transcription
1 GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt BREAK DOWN VOLTAGE 6.8 to 550 Volt FEATURES Recongnized File # E Plastic package has Underwriters Laboratory Flammability Classification 94V-O 600W surge capability at 1ms Excellent clamping capability Low zener impedance Fast response time: typically less than 1 ps from 0 volts to BV min ESD IEC Air + 30kV, Contact + 30kV Lead free in compliance with EU RoHS 2011/65/EU directive MECHANICAL DATA Case: JEDEC DO-15 Molded plastic Terminals: Axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Weight: ounce, 0.4 gram 1.0(25.4)MIN (7.6) 1.0(25.4)MIN (5.8) 0.034(0.86) 0.028(0.71) 0.140(3.6) 0.104(2.6) DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use C or CA Suffix for types Electrical characteristics apply in both directions. MAXIMUM RATINGS AND CHARACTERISTICS Rating at 25 Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz. For Capacitive load derate current by 20%. Rating Symbol Value Units Power Dissipation on T A =25 O C, t P =1ms (Notes 1) P PP 600 Watts Typical Thermal Resistance (Notes 2) R θja 70 R θjc 30 O C / W Peak Pulse Current on tp=10/1000μs waveform (Notes 1) I PPM see Table Amps Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load (Notes 3) I FSM 100 Amps ESD IEC (Air) ESD IEC (Contact) VESD kv Operating Junction and Storage Temperature Range T J,T STG -65 to +175 O C NOTES : 1. Non-repetitive current pulse, per Fig. 3 and derated above T A=25 C per Fig Mounted on 48cm 2 FR-4 PCB ms single half sine-wave, duty cycle= 4 pulses per minutes maximum. 4. A transient suppressor is selected according to the working peak reverse voltage (VRWM), which should be equal to or greater than the DC or continuous peak operating voltage level. PAGE. 1
2 Part Number Reverse Stand-off Voltage Breakdown Voltage Test Current Reverse Leakage Max. Peak Clamp Pulse Voltage Current 10/1000μs 10/1000μs Marking Code V RWM (Notes 4) V IT IT VRWM Min. Max. UNI BI IPP UNI BI V V V ma μa μa V A UNI BI 600W Transient Voltage Suppressor P6KE6.8 P6KE6.8C P6KE6.8 P6KE6.8C P6KE6.8A P6KE6.8CA P6KE6.8A P6KE6.8CA P6KE7.5 P6KE7.5C P6KE7.5 P6KE7.5C P6KE7.5A P6KE7.5CA P6KE7.5A P6KE7.5CA P6KE8.2 P6KE8.2C P6KE8.2 P6KE8.2C P6KE8.2A P6KE8.2CA P6KE8.2A P6KE8.2CA P6KE9.1 P6KE9.1C P6KE9.1 P6KE9.1C P6KE9.1A P6KE9.1CA P6KE9.1A P6KE9.1CA P6KE10 P6KE10C P6KE10 P6KE10C P6KE10A P6KE10CA P6KE10A P6KE10CA P6KE11 P6KE11C P6KE11 P6KE11C P6KE11A P6KE11CA P6KE11A P6KE11CA P6KE12 P6KE12C P6KE12 P6KE12C P6KE12A P6KE12CA P6KE12A P6KE12CA P6KE13 P6KE13C P6KE13 P6KE13C P6KE13A P6KE13CA P6KE13A P6KE13CA P6KE15 P6KE15C P6KE15 P6KE15C P6KE15A P6KE15CA P6KE15A P6KE15CA P6KE16 P6KE16C P6KE16 P6KE16C P6KE16A P6KE16CA P6KE16A P6KE16CA P6KE18 P6KE18C P6KE18 P6KE18C P6KE18A P6KE18CA P6KE18A P6KE18CA P6KE20 P6KE20C P6KE20 P6KE20C P6KE20A P6KE20CA P6KE20A P6KE20CA P6KE22 P6KE22C P6KE22 P6KE22C P6KE22A P6KE22CA P6KE22A P6KE22CA P6KE24 P6KE24C P6KE24 P6KE24C P6KE24A P6KE24CA P6KE24A P6KE24CA P6KE27 P6KE27C P6KE27 P6KE27C P6KE27A P6KE27CA P6KE27A P6KE27CA P6KE30 P6KE30C P6KE30 P6KE30C P6KE30A P6KE30CA P6KE30A P6KE30CA P6KE33 P6KE33C P6KE33 P6KE33C P6KE33A P6KE33CA P6KE33A P6KE33CA P6KE36 P6KE36C P6KE36 P6KE36C P6KE36A P6KE36CA P6KE36A P6KE36CA P6KE39 P6KE39C P6KE39 P6KE39C P6KE39A P6KE39CA P6KE39A P6KE39CA P6KE43 P6KE43C P6KE43 P6KE43C P6KE43A P6KE43CA P6KE43A P6KE43CA P6KE47 P6KE47C P6KE47 P6KE47C P6KE47A P6KE47CA P6KE47A P6KE47CA IPP PAGE. 2
3 Part Number Reverse Stand-off Voltage Breakdown Voltage Test Current Reverse Leakage Max. Peak Clamp Pulse Voltage Current 10/1000μs 10/1000μs Marking Code V RWM (Notes 4) V IT IT VRWM Min. Max. UNI BI IPP IPP UNI BI V V V ma μa μa V A UNI BI 600W Transient Voltage Suppressor P6KE51 P6KE51C P6KE51 P6KE51C P6KE51A P6KE51CA P6KE51A P6KE51CA P6KE56 P6KE56C P6KE56 P6KE56C P6KE56A P6KE56CA P6KE56A P6KE56CA P6KE62 P6KE62C P6KE62 P6KE62C P6KE62A P6KE62CA P6KE62A P6KE62CA P6KE68 P6KE68C P6KE68 P6KE68C P6KE68A P6KE68CA P6KE68A P6KE68CA P6KE75 P6KE75C P6KE75 P6KE75C P6KE75A P6KE75CA P6KE75A P6KE75CA P6KE82 P6KE82C P6KE82 P6KE82C P6KE82A P6KE82CA P6KE82A P6KE82CA P6KE91 P6KE91C P6KE91 P6KE91C P6KE91A P6KE91CA P6KE91A P6KE91CA P6KE100 P6KE100C P6KE100 P6KE100C P6KE100A P6KE100CA P6KE100A P6KE100CA P6KE110 P6KE110C P6KE110 P6KE110C P6KE110A P6KE110CA P6KE110A P6KE110CA P6KE120 P6KE120C P6KE120 P6KE120C P6KE120A P6KE120CA P6KE120A P6KE120CA P6KE130 P6KE130C P6KE130 P6KE130C P6KE130A P6KE130CA P6KE130A P6KE130CA P6KE150 P6KE150C P6KE150 P6KE150C P6KE150A P6KE150CA P6KE150A P6KE150CA P6KE160 P6KE160C P6KE160 P6KE160C P6KE160A P6KE160CA P6KE160A P6KE160CA P6KE170 P6KE170C P6KE170 P6KE170C P6KE170A P6KE170CA P6KE170A P6KE170CA P6KE180 P6KE180C P6KE180 P6KE180C P6KE180A P6KE180CA P6KE180A P6KE180CA P6KE200 P6KE200C P6KE200 P6KE200C P6KE200A P6KE200CA P6KE200A P6KE200CA P6KE220 P6KE220C P6KE220 P6KE220C P6KE220A P6KE220CA P6KE220A P6KE220CA P6KE250 P6KE250C P6KE250 P6KE250C P6KE250A P6KE250CA P6KE250A P6KE250CA P6KE300 P6KE300C P6KE300 P6KE300C P6KE300A P6KE300CA P6KE300A P6KE300CA P6KE350 P6KE350C P6KE350 P6KE350C P6KE350A P6KE350CA P6KE350A P6KE350CA P6KE400 P6KE400C P6KE400 P6KE400C P6KE400A P6KE400CA P6KE400A P6KE400CA P6KE440 P6KE440C P6KE440 P6KE440C P6KE440A P6KE440CA P6KE440A P6KE440CA PAGE. 3
4 Part Number Reverse Stand-off Voltage Breakdown Voltage Test Current Reverse Leakage Max. Peak Clamp Pulse Voltage Current 10/1000μs 10/1000μs Marking Code V RWM V IT VRWM (Notes 4) IT IPP IPP Min. Max. UNI BI UNI BI V V V ma μa μa V A UNI BI 600W Transient Voltage Suppressor P6KE480 P6KE480C P6KE480 P6KE480C P6KE480A P6KE480CA P6KE480A P6KE480CA P6KE550 P6KE550C P6KE550 P6KE550C P6KE550A P6KE550CA P6KE550A P6KE550CA PAGE. 4
5 Part No_packing code_version P6KE6.8_AY_00001 P6KE6.8_AY_10001 P6KE6.8_B0_00001 P6KE6.8_B0_10001 P6KE6.8_R2_00001 P6KE6.8_R2_10001 For example : RB500V-40_R2_00001 Part No. Serial number Version code means HF Packing size code means 13" Packing type means T/R Packing Code XX Version Code XXXXX Packing type 1 st Code Packing size code 2 nd Code HF or RoHS 1 st Code 2 nd ~5 th Code Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) U D PAGE. 5
6 Disclaimer Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. PAGE. 6
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR PEAK PULSE POWER 5000 Watt. 20 to 250 Volt MAXIMUM RATINGS AND CHARACTERISTICS. Rating Symbol Value Units
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR PEAK PULSE POWER 5000 Watt STAND-OFF VOLTAGE 20 to 250 Volt FEATURES For surface mounted applications in order to optimize board space. Glass passivated junction
US1R SURFACE MOUNT ULTRAFAST RECTIFIER FEATURES MECHANICAL DATA MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS. VOLTAGE 1300 Volt CURRENT 1 Ampere
SURFACE MOUNT ULTRAFAST RECTIFIER VOLTAGE 300 Volt CURRENT Ampere FEATURES For surface mounted applications in order to optimize board space Easy pick and place Ultrafast recovery times for high efficiency
Green molding compound as per IEC61249 Std.. (Halogen Free) 0.098(2.5) 0.086(2.2)
SURFACE MOUNT GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER VOLTAGE 50 to 1000 Volt CURRENT 1 Ampere FEATURES Recongnized File #E111753 0.335(8.51) 0.316(8.05) 0.009(0.25) 0.060(1.524) 0.040(1.016) Plastic
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
MS4~MS20 SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE 40 to 200 Volt CURRENT Ampere FEATURES Plastic package has Underwriters Laboratory Flammability Classification 94V-O For surface mounted applications
5 to 70 Volt DEVICES FOR BIPOLAR APPLICATIONS
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt STAND-OFF VOLTAGE 5 to 70 Volt Recongnized File # E210467 FEATURES For surface mounted applications in order to optimize board space AEC-Q101 qualified
MICRO SURFACE MOUNT GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER VOLTAGE 100~1000 Volt CURRENT 1 Amper Recongnized File #E139973
MICRO SURFACE MOUNT GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER VOLTAGE 100~1000 Volt CURRENT 1 Amper Recongnized File #E139973 FEATURES Glass Passivated Chip Junciton Ideally Suited for Automatic Assembly
MB18F SERIES SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER. VOLTAGE Volt CURRENT 1 Ampere FEATURES MECHANICAL DATA
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE 80-200 Volt CURRENT Ampere FEATURES Plastic package has Underwriters Laboratory Flammability Classification 94V-O For surface mounted applications Ultra
RS1AWG SERIES SURFACE MOUNT FAST RECOVERY RECTIFIER FEATURES MECHANICAL DATA MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
SURFACE MOUNT FAST RECOVERY RECTIFIER VOLTAGE 50 to 000 Volts CURRENT Amperes FEATURES For surface mounted applications in order to optimize board space Easy pick and place Fast recovery times for high
MICRO SURFACE MOUNT GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER VOLTAGE 400~1000 Volt CURRENT 1.2 Amper. per diode I FSM 50 A
MICRO SURFACE MOUNT GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER VOLTAGE 400~000 Volt CURRENT.2 Amper FEATURES Glass Passivated Chip Junciton Ideally Suited for Automatic Assembly Save Space On Printed
Rating Symbol Value Units T STG. Parameter Symbol Conditions Min. Typical Max. Units I BR V R I PP
SINGLE LINE TVS DIODE FOR ESD PROTECTION PORTABLE ELECTRONICS VOLTAGE 5 Volt POWER 200 Watt FEATURES 200 Watts peak pules power( tp=8/20μs) Small package for use in portable electronics IEC61000-4-2 8KV
1 Watt MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
SURFACE MOUNT SILICON ZENER DIODE VOLTAGE 3.3 to 51 Volt POWER 1 Watt FEATURES For surface mounted applications in order to optimize board space Low inductance Plastic package has Underwriters Laboratory
SS12L SERIES LOW VF SURFACE MOUNT SCHOTTKY RECTIFIER MECHANICAL DATA. VOLTAGE 20 to 90 Volt CURRENT 1.0 Ampere FEATURES
LOW VF SURFACE MOUNT SCHOTTKY RECTIFIER VOLTAGE 20 to 90 Volt CURRENT.0 Ampere FEATURES Plastic package has Underwriters Laboratory Flammability Classification 94V-O For surface mounted applications Low
PJSRV05-4 LOW CAPACITANCE TVS DIODE ARRAY. VOLTAGE 5 Volt POWER 350 Watt FEATURES MECHANICAL DATA APPLICATIONS MAXIMUM RATINGS
LOW CAPACITANCE TVS DIODE ARRAY The PJSRV5-4 has a low capacitance of 1.2pF and operates with virtually no insertion loss to 1GHz. This makes the device ideal for protection of high-speed data lines such
1N4736A SERIES SILICON ZENER DIODE MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS FEATURES MECHANICAL DATA
N4736A SERIES SILICON ZENER DIODE VOLTAGE 6.8 to Volt POWER Watt FEATURES Low inductance High temperature soldering : 260 C /0 seconds at terminals Plastic package has Underwriters Laboratory Flammability
MMBD914 SURFACE MOUNT SWITCHING DIODE. VOLTAGE 100 Volt POWER 225 mwatt FEATURES MECHANICAL DATA ABSOLUTE RATINGS THERMAL CHARACTERISTICS
SURFACE MOUNT SWITCHING DIODE VOLTAGE 100 Volt POWER 225 mwatt FEATURES Very fast reverse recovery (Trr < 2ns typical) Low capacitance (4pF @ 0V typical) Surface mount package ideally suited for automatic
SK54BLF LOW VF SCHOTTKY RECTIFIER. VOLTAGE 40 Volt CURRENT 5 Ampere FEATURES MECHANICAL DATA. MAXIMUM RATINGS (TA=25 o C unless otherwise noted)
LOW VF SCHOTTKY RECTIFIER VOLTAGE 40 Volt CURRENT 5 Ampere FEATURES Plastic package has Underwriters Laboratory Flammability Classification 94VO utilizing Flame Retardant Expoxy Molding Compound Ultra
PJSD05LCFN2 TYPICAL CHARACTERISTIC CURVES. I R,Reverse Current (na) Percent of Rated Peak Reverse Voltage (%) time, s.
BI-DIRECTIONAL ESD PROTECTION DIODE This bi-directional TVS has been designed to protect sensitive equipment against ESD and to prevent Latch-Up events in CMOS circuitry operating at 5V dc and below.this
BAV3004W HIGH VOLTAGE SURFACE MOUNT SWITCHING DIODE
HIGH VOLTAGE SURFACE MOUNT SWITCHING DIODE VOLTAGE 350 Volts POWER 410 mwatts SOD-123 Unit:inch(mm) FEATURES Fast Switching Speed Surface Mount Package ldeally Suited for Automatic Insertion High Conductance
1N4148W SURFACE MOUNT SWITCHING DIODES. VOLTAGE 100 Volt POWER 410mWatt FEATURES MECHANICAL DATA
SURFACE MUNT SWITCHING DIDES VLTAGE 100 Volt PWER 410mWatt FEATURES 0.154(3.90) 0.141(3.60) Fast switching Speed. Electrically ldentical to Standerd JEDEC High Conductance Surface Mount Package ldeally
BAS100ATB6 SURFACE MOUNT DUAL ISOLATED OPPOSING SILICON SCHOTTKY DIODES. VOLTAGE 100 Volt FEATURES MECHANICAL DATA
SURFACE MOUNT DUAL ISOLATED OPPOSING SILICON SCHOTTKY DIODES VOLTAGE 00 Volt FEATURES Smallest 00V Dual, isolated Schottky diode currently available Lead free in compliance with EU RoHS 20/65/EU directive
2N7002KDW. 60V N-Channel Enhancement Mode MOSFET - ESD Protected. Parameter Symbol Limit Units 60 V. Drain-Source Voltage V DS + 20 V
60V N-Channel Enhancement Mode MOSFET - ESD Protected FEATURES R DS(ON), @10V,I DS @500mA=3Ω R DS(ON), @4.5V,I DS @200mA=4Ω Advanced Trench Process Technology High Density Cell Design For Ultra Low On-Resistance
SK23L SERIES. LOW VF SCHOTTKY RECTIFIER VOLTAGE 30 to 100 Volts CURRENT 2.0 Amperes FEATURES MECHANICAL DATA
LOW VF SCHOTTKY RECTIFIER VOLTAGE 30 to 00 Volts CURRENT 2.0 Amperes FEATURES Plastic package has Underwriters Laboratory Flammability Classification 94VO For surface mounted applications Low profile package
PUF5GI / UF504IG ULTRAFAST RECOVERY RECTIFIERS. Voltage 400 V Current 5 A. Features UF504IG DO-201AD. Mechanical Data UF5GI SMC
ULTRAFAST RECOVERY RECTIFIERS Voltage 400 V Current 5 A Features Silicon epitaxial high-speed diodes Soft recovery characteristics Low forward voltage, high current capability Hermetically sealed. Low
ES1A~ES1J SURFACE MOUNT SUPERFAST RECTIFIER FEATURES MECHANICAL DATA MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
SURFACE MUNT SUPERFAST RECTIFIER VLTAGE 5 to 6 Volts CURRENT 1 Amperes FEATURES For surface mounted applications in order to optimize board space Built-in strain relief Easy pick and place Superfast recovery
1.5SMCJ5.0A-AU~1.5SMCJ70CA-AU
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR PEAK PULSE POWER 1500 Watt STAND-OFF VOLTAGE 5 to 70 Volt Recongnized File # E2467 FEATURES For surface mounted applications in order to optimize board space.
SVM1045V2 LOW VF SCHOTTKY RECTIFIER. VOLTAGE 45 Volt CURRENT 10 Ampere FEATURES MECHANICAL DATA. MAXIMUM RATINGS(TA=25 o C unless otherwise noted)
.. LOW VF SCHOTTKY RECTIFIER VOLTAGE 45 Volt CURRENT Ampere FEATURES Ideal for automated placement Low forward voltage drop, low power loss High efficiency Operation Low thermal resistance 0.172(4.35)
SXM54ALF ULTRA LOW VF SCHOTTKY RECTIFIER. VOLTAGE 45 Volt CURRENT 5 Ampere FEATURES MECHANICAL DATA. MAXIMUM RATINGS(TA=25 o C unless otherwise noted)
ULTRA LOW VF SCHOTTKY RECTIFIER VOLTAGE 45 Volt CURRENT 5 Ampere FEATURES Ideal for automated placement Ultra Low forward voltage drop, low power loss High efficiency operation Low thermal resistance Ultra
SVM1045V LOW VF SCHOTTKY RECTIFIER. VOLTAGE 45 Volt CURRENT 10 Ampere FEATURES MECHANICAL DATA. MAXIMUM RATINGS(TA=25 o C unless otherwise noted)
.. SVM45V LOW VF SCHOTTKY RECTIFIER VOLTAGE 45 Volt CURRENT Ampere FEATURES Ideal for automated placement Ultra low forward voltage drop, low power loss High efficiency Operation 0.172(4.35) 0.167(4.25)
2N7002KTB. 60V N-Channel Enhancement Mode MOSFET - ESD Protected FEATURES MECHANICAL DATA. =25 O C unless otherwise noted )
6V N-Channel Enhancement Mode MOSFET - ESD Protected FEATURES R DS(ON), @V,I DS @5mA=3Ω R DS(ON), @4.5V,I DS @2mA=4Ω Advanced Trench Process Technology High Density Cell Design For Ultra Low On-Resistance
PJSD12LCFN2 BI-DIRECTIONAL ESD PROTECTION DIODE
BIDIRECTIONAL ESD PROTECTION DIODE This bidirectional TVS has been designed to protect sensitive equipment against ESD and to prevent LatchUp events in CMOS circuitry operating at 12Vdc and below.this
PJSD05CW-AU SERIES. Fig.130. Single Line TVS Diode for ESD Protection in Portable Electronics FEATURES MECHANICAL DATA ABSOLUTE MAXIMUM RATINGS
PJSD5W-AU SERIES Single Line TVS Diode for ESD Protection in Portable Electronics VOLTAGE 5 to 36 Volt POWER 35 Watt FEATURES Transient protection for data lines to IE 61-4-2 (ESD) + 15kV (air),+ 8kV (contact).78(1.95).68(1.75)
PJ3L85 DATA BUS TERMINATOR / 3-PHASE, FULL WAVE BRIDGE SOT-363 FEATURES APPLICATIONS MAXIMUM RATINGS THERMAL CHARACTERISTICS
DATA BUS TERMINATOR / 3PHASE, FULL WAVE BRIDGE This highly integrated device is designed as rail to rail overvoltage protection clamp for up to 3 data lines. It is also ideal as a threephase, full wave
PJSD03TS~PJSD36TS. SINGLE LINE TVS DIODE FOR ESD PROTECTION PORTABLE ELECTRONICS VOLTAGE 3~36 Volt POWER 120 Watt FEATURES APPLICATIONS
SINGLE LINE TVS DIODE FOR ESD PROTECTION PORTABLE ELECTRONICS VOLTAGE 3~36 Volt POWER 120 Watt FEATURES 120 Watts peak pules power( tp=8/20μs) Small package for use in portable electronics Suitable replacement
MBR1040VL SURFACE MOUNT LOW FORWARD DROP SCHOTTKY BARRIER. VOLTAGE 40 Volt CURRENT 1 Amper FEATURES MECHANICAL DATA ABSOLUTE RATINGS
SURFAE MOUNT LOW FORWARD DROP SHOTTKY BARRIER VOLTAGE 40 Volt URRENT 1 Amper FEATURES Fast switching speed Surface mount package ideally suited for automatic insertion 0.115(2.90) 0.106(2.70) 0.075(1.90)
MMBT4403 PNP GENERAL PURPOSE SWITCHING TRANSISTOR FEATURES MECHANICAL DATA ABSOLUTE MAXIMUM RATINGS THERMAL CHARACTERISTICS
PNP GENERAL PURPOSE SWITCHING TRANSISTOR VOLTAGE 40V POWER 225mW FEATURES PNP epitaxial silicon, planar design 0.120(3.04) 0.110(2.80) Collectoremitter voltage V CE = 40V Collector current I C =600mA Complimentary
ER2DAF SURFACE MOUNT RECTIFIER. VOLTAGE 200 Volts CURRENT 2 Amperes FEATURES MECHANICAL DATA
SURFACE MOUNT FEATURES RECTIFIER VOLTAGE 200 Volts CURRENT 2 Amperes Plastic package has Underwriters Laboratory Flammability Classification 94V-O For surface mounted applications Glass passivated junction
PBAT54-AU SERIES. SURFACE MOUNT SCHOTTKY DIODES Voltage 30 V Current 0.2 A. Features. Mechanical Data
SURFACE MOUNT SCHOTTKY DIODES Voltage 30 V Current 0.2 A SOT-23 Features Fast switching speed Surface mount package ideally suited for automatic insertion electrical identical standard JEDEC High conductor
PSX34-AU. SURFACE MOUNT LOW VF SCHOTTKY BARRIER RECTIFIER Voltage 40 V Current 3 A. Features. Mechanical Data
SURFACE MOUNT LOW VF SCHOTTKY BARRIER RECTIFIER Voltage 40 V Current 3 A Features Deal for automated placement Low power loss, high efficiency High surge current capability Lead free in compliance with
Transient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features Glass passivated junction Low zener impedance Excellent clamping capability 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty
DUAL SURFACE MOUNT NPN/PNP TRANSISTORS (COMPLIMENTARY) Rating Symbol Value Units Collector-Base Voltage. 50 V Collector-Emitter Voltage
DUAL SURFACE MOUNT NPN/PNP TRANSISTORS (COMPLIMENTARY) This device contains two electrically-isolated complimentary pair (NPN and PNP) general-purpose transistors. This device is ideal for portable applications
BC846-AU,BC847-AU,BC848-AU,BC849-AU,BC850-AU SERIES
BC846-AU,BC847-AU,BC848-AU,BC849-AU,BC85-AU SERIES NPN GENERAL PURPOSE TRANSISTORS OLTAGE 3/45/65 olt POWER 33 mwatt FEATURES General purpose amplifier applications NPN epitaxial silicon, planar design
P4KE SERIES Taiwan Semiconductor
400W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 400W surge capability at 10 / 1000 μs waveform - Fast response time: Typically less than
Distributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. P6KE6V8(C)A - P6KE4(C)A 6W TRANSIENT VOLTAGE SUPPRESSOR Features 6W Peak Pulse
P6KE SERIES Taiwan Semiconductor
600W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps
P6AF3.3A~P6AF64A. SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Voltage 3.3~64 V Power 600 W SMAF Unit: inch(mm) Features.
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Voltage 3.3~64 V Power 600 W SMAF Unit: inch(mm) Features For surface mounted applications in order to optimize board space. Ultra thin profile package for space
PSBT30100VYT ULTRA LOW VF SCHOTTKY BARRIER RECTIFIER. Voltage 100 V Current 30 A. Features. Mechanical Data
ULTRA LOW VF SCHOTTKY BARRIER RECTIFIER Voltage 100 V Current 30 A Features TO220AB Unit: inch(mm) Ultra low forward voltage drop, low power loss High efficiency operation Lead free in compliance with
P6AF3.3A-AU~P6AF64A-AU
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Voltage 3.3~64 V Power 600 W SMAF Unit: inch(mm) Features For surface mounted applications in order to optimize board space. Ultra thin profile package for space
PJSD05CW SERIES. Fig.130. Single Line TVS Diode for ESD Protection in Portable Electronics FEATURES MECHANICAL DATA ABSOLUTE MAXIMUM RATINGS
Single Line TS Diode for ESD Protection in Portable Electronics OLTAGE 5 to 36 olt POWER 35 Watt FEATURES Transient protection for data lines to IE 6-4-2 (ESD) + 15k (air),+ 8k (contact).78(1.95).68(1.75)
PARAMETER SYMBOL LIMIT UNITS
20V P-Channel Enhancement Mode MOSFET ESD Protected SOT-23 Voltage -20 V Current -4.3A Unit : inch(mm) Features RDS(ON), VGS@-4.5V, ID@-4.3A
30KP Series 30000W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR R-6 PACKAGE WILLAS ELECTRONIC CORP. R-6 (Cathode band Only Uui-polarity product)
3W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR 3KP Series 1.(25.4)MIN..36(9.14).338(8.6) 1.(25.4)MIN. R-6 (Cathode band Only Uui-polarity product).52(1.32).47(1.2) Dimensions in inches and (millimeters) DIA..36(9.14).338(8.6)
20V N-Channel Enhancement Mode MOSFET ESD Protected PARAMETER SYMBOL LIMIT UNITS
20V N-Channel Enhancement Mode MOSFET ESD Protected Voltage 20 V Current 800mA SOT-523 Unit : inch(mm) Features R DS(ON), V GS@4.5V,I DS@500mA=0.4Ω R DS(ON), V GS@2.5V,I DS@300mA=0.7Ω R DS(ON), V GS@1.8V,I
PPJW3P10A. 100V P-Channel Enhancement Mode MOSFET. Voltage -100 V Current -2.6 A. Features. Mechanical Data
100V P-Channel Enhancement Mode MOSFET Voltage -100 V Current -2.6 A Features SOT-223 R DS(ON), V GS @-10V,I D @-2.6A
PARAMETER SYMBOL LIMIT UNITS
20V P-Channel Enhancement Mode MOSFET Voltage -20 V Current -4.0A Features RDS(ON), VGS@-4.5V, ID@-4.0A
MMBT3904-AU NPN GENERAL PURPOSE SWITCHING TRANSISTOR. VOLTAGE 40 Volt POWER 225 mwatt FEATURES MECHANICAL DATA ABSOLUTE RATINGS
MMBT3904AU NPN GENERAL PURPOSE SWITCHING TRANSISTOR OLTAGE 40 olt POWER 225 mwatt FEATURES SOT23 Unit: inch(mm) NPN epitaxial silicon, planar design emitter voltage CE = 40 0.120(3.04) 0.110(2.80) current
V DD =30V, I D =200mA, Turn-On Rise Time tr V GS =10V, Turn-Off Delay Time td (off) (Note 1,2) R G =10Ω Turn-Off Fall Time tf
60V N-Channel Enhancement Mode MOSFET ESD Protected Voltage 60 V Current 300mA SOT-23 Unit : inch(mm) Features R DS(ON), V GS @10V, I D @500mA
MMBT4401 NPN GENERAL PURPOSE SWITCHING TRANSISTOR. VOLTAGE 40 Volt POWER 225 mwatt FEATURES MECHANICAL DATA ABSOLUTE RATINGS THERMAL CHARACTERISTICS
NPN GENERAL PURPOSE SWITCHING TRANSISTOR VOLTAGE 40 Volt POWER 225 mwatt FEATURES NPN epitaxial silicon, planar design Collectoremitter voltage V CE = 40V 0.20(3.04) 0.0(2.80) 0.006(0.5)MIN. Collector
Transient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent
P6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V P PPM 600 W P D 5.0 W I FSM (uni-directional
SA SERIES Taiwan Semiconductor
500W, 5V - 170V Transient Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from
BZW04 SERIES Taiwan Semiconductor
W, 5.8V - 376V Transient Voltage Suppressor BZW4 SERIES FEATURES - Excellent clamping capability - Low impedance surge resistance - W surge capability at / μs waveform - Very fast response time - Typical
6600W, 10V 43V Surface Mount Transient Voltage Suppressor
66W, 1V 43V Surface Mount Transient Voltage Suppressor FEATURES AEC-Q11 qualified Junction passivation optimized design technology T J =175 C capability suitable for high reliability and automotive requirement
BZW06 SERIES Taiwan Semiconductor
600W, 3V - 376V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at / 0 μs waveform - Fast response time: Typically less than.0ps from
P6KE-G Series. 600W Transient Voltage Suppressor. Stand-off Voltage: 6.8 ~ 600V Power Dissipation: 600 Watts RoHS Device. Features.
P6KE-G Series Stand-off Voltage: 6.8 ~ 6V Power Dissipation: 6 Watts RoHS Device Features -Plastic package has underwriters laboratory flammability classification 94V- -6W, surge capability at ms. -Excellent
SA Series. Working Voltage: 5.0 to 190 V Peak Pulae Power: 500 W 500W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR DO-15 PACKAGE
Working : 5.0 to 190 V Peak Pulae Power: 500 W Features Glass passivated chip 500 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle):0.01 % Low leakage Uni and Bidirectional
5 to 220 Volt DEVICES FOR BIPOLAR APPLICATIONS
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR POWER 600 Watt STAND-OFF VOLTAGE 5 to 220 Volt Recongnized File # E210467 FEATURES For surface mounted applications in order to optimize board space Glass passivated
P4KE6.8A thru P4KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 54 V V BR bi-directional 6.8 V to 44 V P PPM 4 W P D 1.5 W I FSM (uni-directional only)
PP4SMA6.8A-AU ~ P4SMA82CA-AU Series
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Voltage 6.8~82 V Power 400 W Features ISO605(C=330 pf,r=330ω): ± 30kV Air, ± 30kV Contact HBM ± 8 kv & CDM ± 2 kv AEC-Q1 qualified Lead free in compliance with
China - Germany - Korea - Singapore - United States - smc-diodes.com
TRANSIENT SUPPRESSOR Features DO-15 Glass Passivated Die Construction 600W Peak Pulse Power Dissipation 5.8V- 376V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping Capability
High Temperature Stability and High Reliability Conditions FEATURES. PARAMETER SYMBOL VALUE UNIT with 10/1000 μs waveform Peak pulse power dissipation
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 36 V V BR 11.1 V to 44.2 V P PPM (1 x 1 μs) 36 W P PPM (1
Surface Mount Transient Voltage Suppressors (TVS)
Description The 1.5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional
DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY 1.0SMB series
Product specification November 5, 28 V. DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS AC/DC POWER SUPPLY.SMB series RoHS compliant & Halogen free Transient Suppressors.SMB 2 Transient Suppressors (TVS) Data
Single Pulsed (Note 4) E AS 1100 mj Repetitive (Note 5) E AR 29 mj Peak Diode Recovery dv/dt (Note 5) dv/dt 15 V/ns 290 TO-3PL P D 220
500V N-Channel MOSFET Voltage 500 V Current 24A Features: R DS(ON), @,I D@ 12.0A
ICTE5 thru ICTE18C, 1N6373 thru 1N6386. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
TRANSZORB Transient Voltage Suppressors Case Style 1.5KE PRIMARY CHARACTERISTICS V WM 5. V to 18 V V BR (uni-directional) 6. V to 21.2 V V BR (bi-directional) 9.2 V to 21.2 V P PPM 1 W P D 6.5 W I FSM
General Purpose Plastic Rectifier
General Purpose Plastic Rectifier N400 thru N4007 DO-4AL (DO-4) MAJOR RATINGS AND CHARACTERISTICS I F(AV).0 A V RRM V to 00 V I FSM (8.3 ms sine-wave) A I FSM (square wave t p = ms) 45 A V F. V I R 5.0
Surface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM (uni-directional) 5.8 V to 459 V V WM (bi-directional) 5.8 V to 185 V V BR (uni-directional) 6.8 V to 540 V V BR (bi-directional)
SMB10J SERIES Taiwan Semiconductor
0W Surface Mount Transient Voltage Suppressor FEATURES - Low profile package - Ideal for automated placement - Glass passivated junction - Excellent clamping capability - Fast response time: typically
ICTE5.0 THRU ICTE15C SERIES
ICTE5.0 THRU ICTE15C SERIES TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR Stand-off Voltage - 5.0 to 15 Volts Peak Pulse Power - Watts Case Style 1.5KE 1.00 (25.4) MIN. 0.205 (5.207) 0.190 (4.826) DIA. 0.375
Green. Part Number Qualification Case Packaging P4SMAJXXADF-13 Commercial D-FLAT 10,000/Tape & Reel
Green 400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Features Mechanical Data Packaged in the Low Profile D-FLAT to Optimize Board Space Case: D-FLAT Glass Passivated Die Construction Excellent Clamping
High Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions DO-218 Compatible PRIMARY CHARACTERISTICS V BR 11.1 V to 52.8 V P PPM (1 x μs) 66 W P PPM (1 x
P4KE Series RoHS Pb e3
P4KE Series RoHS Pb e3 Description Bi-directional Uni-directional The P4KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
High Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions DO-28AB PRIMARY CHARACTERISTICS V BR 27 V P PPM ( x μs) 36 W P D 5 W V WM 22 V I RSM 7 A I FSM
P6SMB Transient Voltage Suppressor Diode Series
P6SMB Transient Voltage Suppressor Diode Series General Information The P6SMB series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping
High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors
High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.4 V to 49.1 V V WM 5.0 V to 40 V P PPM 0 W I FSM (uni-directional only) 40 A T J max. 1 C Polarity
200W, 5V - 100V Surface Mount Transient Voltage Suppressor
200W, 5V - 100V Surface Mount Transient Voltage Suppressor FEATURES Photo Glass passivated junction Low power loss, high efficiency Ideal for automated placement Excellent clamping capability Typical I
Rev. 02
PRIMARY CHARACTERISTICS SMB(DO-214AA) PACKAGE P PP V BR I PP V C 600W 6.8V~600V 57.14A~0.72A 10.5V~828V Body Marking :Please See Page 3 EX : SM 12A EX : SM 12CA T J,Max 150 12 A 12 C UNI- POLAR BI-POLAR
MSP5.0A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. New Product
MSP5.A Surface Mount TRANSZORB Transient Voltage Suppressors esmp TM Series Top View Bottom View MicroSMP PRIMARY CHARACTERISTICS V WM 5. V P PPM W I FSM 25 A T J max. 5 C FEATURES Very low profile - typical
Glass Passivated Junction Plastic Rectifier
N400GP, N4002GP, N4003GP, N4004GP, N4005GP, N4006GP, N4007GP Glass Passivated Junction Plastic Rectifier SUPERECTIFIER DO-204AL (DO-4) FEATURES Superectifier structure for high reliability application
FAIRCHILD TVS Is Now Part of
FAIRCHILD TVS Is Now Part of To learn more about Taiwan Semiconductor, please visit our website at www.taiwansemi.com Please note: The acquisition of this portfolio aligns with our strategy to expand in
5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor
5KP Series 5000 Watt Axial Leaded Transient Voltage Suppressor Description The 5KP Series are designed specifically to protect sensitive Uni-directional electronics equipment from voltage transients induced
1.5SMCxxAT3G. TVS Diodes. Surface Mount > 1500W > 1.5SMCxxAT3G. Cathode. Anode. Uni-directional. Description
1.5SMCxxAT3G Pb Description The 1.5SMCxxAT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability,
Surface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors esmp Series PRIMARY CHARACTERISTICS V BR uni-directional 4. V to 44.2 V V WM 3.3 V to 36 V P PPM 400 W I FSM 40 A T J max. 150 C Polarity Uni-directional
5KP8.5A thru 5KP188A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES TYPICAL APPLICATIONS
TRANSZORB Transient Voltage Suppressors P6 PRIMARY CHARACTERISTICS V WM 8.5 V to 188 V V BR 9.4 V to 231 V P PPM 5 W P D 8. W I FSM 5 A T J max. 175 C Polarity Uni-directional Package P6 FEATURES P6 glass
Surface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.8 V to 220 V V WM 5.8 V to 188 V P PPM 600 W P D 5.0 W I FSM (uni-directional only) A T J max. 150 C Polarity Uni-directional,
New Product. High Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 43 V V BR 11.1 V to 52.8 V P PPM 3 W P D 6. W I FSM 2 A T
SA5.0A thru SA170CA. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.0 V to 170 V V BR (uni-directional) 6.4 V to 209 V V BR (bi-directional) 6.4 V to 209 V P PPM 500 W P D 3.0 W I FSM
1SMA4737-1SMA200Z Taiwan Semiconductor
CREAT BY ART W, 7.5V - 200V Surface Mount Silicon Zener Diodes SMA4737 - SMA200Z FEATURES - Built-in strain relief - Ideal for automated placement - Glass passivated junction - Low inductance - Typical
Transient Voltage Suppression Diodes Axial Leaded 600W > P6KE series
Axial Leaded 6W > P6KE series RoHS Pb Description The is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
Unidirectional*
Unidirectional* Mosorb devices are designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability, low zener
High Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 43 V V BR 11.1 V to 52.8 V P PPM 3 W P D 6. W I FSM 2 A T
SA5.0A thru SA170CA. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.0 V to 170 V P PPM 500 W P D 3.0 W I FSM (uni-directional only) 70 A T J max. 175 C DEVICES FOR BI-DIRECTION APPLICATIONS